Fedora kernel-2.6.17-1.2142_FC4 patched with stable patch-2.6.17.4-vs2.0.2-rc26.diff

[linux-2.6.git] / drivers / macintosh / Kconfig

diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 8a7117a..12ad462 100644 (file)
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -4,7 +4,7 @@ menu "Macintosh device drivers"
 
 config ADB
        bool "Apple Desktop Bus (ADB) support"
-       depends on MAC || PPC_PMAC
+       depends on MAC || (PPC_PMAC && PPC32)
        help
          Apple Desktop Bus (ADB) support is for support of devices which
          are connected to an ADB port.  ADB devices tend to have 4 pins.
@@ -86,39 +86,24 @@ config PMAC_SMU
          on the "SMU" system control chip which replaces the old PMU.
          If you don't know, say Y.
 
-config PMAC_PBOOK
-       bool "Power management support for PowerBooks"
-       depends on ADB_PMU
-       ---help---
-         This provides support for putting a PowerBook to sleep; it also
-         enables media bay support.  Power management works on the
-         PB2400/3400/3500, Wallstreet, Lombard, and Bronze PowerBook G3 and
-         the Titanium Powerbook G4, as well as the iBooks.  You should get
-         the power management daemon, pmud, to make it work and you must have
-         the /dev/pmu device (see the pmud README).
-
-         Get pmud from <ftp://ftp.samba.org/pub/ppclinux/pmud/>.
-
-         If you have a PowerBook, you should say Y here.
-
-         You may also want to compile the dma sound driver as a module and
-         have it autoloaded. The act of removing the module shuts down the
-         sound hardware for more power savings.
-
-config PM
-       bool
-       depends on PPC_PMAC && ADB_PMU && PMAC_PBOOK
-       default y
-
 config PMAC_APM_EMU
        tristate "APM emulation"
-       depends on PMAC_PBOOK
+       depends on PPC_PMAC && PPC32 && PM
+
+config PMAC_MEDIABAY
+       bool "Support PowerBook hotswap media bay"
+       depends on PPC_PMAC && PPC32
+       help
+         This option adds support for older PowerBook's hotswap media bay
+         that can contains batteries, floppy drives, or IDE devices. PCI
+         devices are not fully supported in the bay as I never had one to
+         try with
 
 # made a separate option since backlight may end up beeing used
 # on non-powerbook machines (but only on PMU based ones AFAIK)
 config PMAC_BACKLIGHT
        bool "Backlight control for LCD screens"
-       depends on ADB_PMU
+       depends on ADB_PMU && (BROKEN || !PPC64)
        help
          Say Y here to build in code to manage the LCD backlight on a
          Macintosh PowerBook.  With this code, the backlight will be turned
@@ -126,13 +111,6 @@ config PMAC_BACKLIGHT
          events; also, the PowerBook button device will be enabled so you can
          change the screen brightness.
 
-config MAC_SERIAL
-       tristate "Support for PowerMac serial ports (OBSOLETE DRIVER)"
-       depends on PPC_PMAC && BROKEN
-       help
-         This driver is obsolete. Use CONFIG_SERIAL_PMACZILOG in
-         "Character devices --> Serial drivers --> PowerMac z85c30" option.
-
 config ADB_MACIO
        bool "Include MacIO (CHRP) ADB driver"
        depends on ADB && PPC_CHRP && !PPC_PMAC64
@@ -171,14 +149,14 @@ config MAC_EMUMOUSEBTN
 
 config THERM_WINDTUNNEL
        tristate "Support for thermal management on Windtunnel G4s"
-       depends on I2C && I2C_KEYWEST && PPC_PMAC && !PPC_PMAC64
+       depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
        help
          This driver provides some thermostat and fan control for the desktop
          G4 "Windtunnel"
 
 config THERM_ADT746X
        tristate "Support for thermal mgmnt on laptops with ADT 746x chipset"
-       depends on I2C && I2C_KEYWEST && PPC_PMAC && !PPC_PMAC64
+       depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
        help
          This driver provides some thermostat and fan control for the
           iBook G4, and the ATI based aluminium PowerBooks, allowing slighlty
@@ -186,11 +164,38 @@ config THERM_ADT746X
 
 config THERM_PM72
        tristate "Support for thermal management on PowerMac G5"
-       depends on I2C && I2C_KEYWEST && PPC_PMAC64
+       depends on I2C && I2C_POWERMAC && PPC_PMAC64
        help
          This driver provides thermostat and fan control for the desktop
          G5 machines. 
 
+config WINDFARM
+       tristate "New PowerMac thermal control infrastructure"
+
+config WINDFARM_PM81
+       tristate "Support for thermal management on iMac G5"
+       depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
+       select I2C_POWERMAC
+       help
+         This driver provides thermal control for the iMacG5
+
+config WINDFARM_PM91
+       tristate "Support for thermal management on PowerMac9,1"
+       depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
+       select I2C_POWERMAC
+       help
+         This driver provides thermal control for the PowerMac9,1
+          which is the recent (SMU based) single CPU desktop G5
+
+config WINDFARM_PM112
+       tristate "Support for thermal management on PowerMac11,2"
+       depends on WINDFARM && I2C && PMAC_SMU
+       select I2C_POWERMAC
+       help
+         This driver provides thermal control for the PowerMac11,2
+         which are the recent dual and quad G5 machines using the
+         970MP dual-core processor.
+
 config ANSLCD
        tristate "Support for ANS LCD display"
        depends on ADB_CUDA && PPC_PMAC