* a sleep or a freq. switch
* - Move sleep code out of here to pmac_pm, merge into new
* common PM infrastructure
- * - Move backlight code out as well
* - Save/Restore PCI space properly
*
*/
#include <stdarg.h>
-#include <linux/config.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <asm/mmu_context.h>
#include <asm/cputable.h>
#include <asm/time.h>
-#ifdef CONFIG_PMAC_BACKLIGHT
#include <asm/backlight.h>
-#endif
-#ifdef CONFIG_PPC32
-#include <asm/open_pic.h>
-#endif
+#include "via-pmu-event.h"
/* Some compile options */
#undef SUSPEND_USES_PMU
static int data_len;
static volatile int adb_int_pending;
static volatile int disable_poll;
-static struct adb_request bright_req_1, bright_req_2;
static struct device_node *vias;
static int pmu_kind = PMU_UNKNOWN;
static int pmu_fully_inited = 0;
static int pmu_has_adb;
static struct device_node *gpio_node;
static unsigned char __iomem *gpio_reg = NULL;
-static int gpio_irq = -1;
+static int gpio_irq = NO_IRQ;
static int gpio_irq_enabled = -1;
static volatile int pmu_suspended = 0;
static spinlock_t pmu_lock;
#if defined(CONFIG_PM) && defined(CONFIG_PPC32)
static int option_lid_wakeup = 1;
#endif /* CONFIG_PM && CONFIG_PPC32 */
-#if (defined(CONFIG_PM)&&defined(CONFIG_PPC32))||defined(CONFIG_PMAC_BACKLIGHT)
+#if (defined(CONFIG_PM)&&defined(CONFIG_PPC32))||defined(CONFIG_PMAC_BACKLIGHT_LEGACY)
static int sleep_in_progress;
#endif
static unsigned long async_req_locks;
static struct adb_request batt_req;
static struct proc_dir_entry *proc_pmu_batt[PMU_MAX_BATTERIES];
-#if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT)
-extern int disable_kernel_backlight;
-#endif /* defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) */
-
int __fake_sleep;
int asleep;
BLOCKING_NOTIFIER_HEAD(sleep_notifier_list);
int count, int *eof, void *data);
static int proc_get_irqstats(char *page, char **start, off_t off,
int count, int *eof, void *data);
-#ifdef CONFIG_PMAC_BACKLIGHT
-static int pmu_set_backlight_level(int level, void* data);
-static int pmu_set_backlight_enable(int on, int level, void* data);
-#endif /* CONFIG_PMAC_BACKLIGHT */
static void pmu_pass_intr(unsigned char *data, int len);
static int proc_get_batt(char *page, char **start, off_t off,
int count, int *eof, void *data);
"Core99"
};
-#ifdef CONFIG_PMAC_BACKLIGHT
-static struct backlight_controller pmu_backlight_controller = {
- pmu_set_backlight_enable,
- pmu_set_backlight_level
-};
-#endif /* CONFIG_PMAC_BACKLIGHT */
-
int __init find_via_pmu(void)
{
u64 taddr;
*/
static int __init via_pmu_start(void)
{
+ unsigned int irq;
+
if (vias == NULL)
return -ENODEV;
- bright_req_1.complete = 1;
- bright_req_2.complete = 1;
batt_req.complete = 1;
-#ifndef CONFIG_PPC_MERGE
- if (pmu_kind == PMU_KEYLARGO_BASED)
- openpic_set_irq_priority(vias->intrs[0].line,
- OPENPIC_PRIORITY_DEFAULT + 1);
-#endif
-
- if (request_irq(vias->intrs[0].line, via_pmu_interrupt, 0, "VIA-PMU",
- (void *)0)) {
- printk(KERN_ERR "VIA-PMU: can't get irq %d\n",
- vias->intrs[0].line);
- return -EAGAIN;
+ irq = irq_of_parse_and_map(vias, 0);
+ if (irq == NO_IRQ) {
+ printk(KERN_ERR "via-pmu: can't map interruptn");
+ return -ENODEV;
+ }
+ if (request_irq(irq, via_pmu_interrupt, 0, "VIA-PMU", (void *)0)) {
+ printk(KERN_ERR "via-pmu: can't request irq %d\n", irq);
+ return -ENODEV;
}
if (pmu_kind == PMU_KEYLARGO_BASED) {
if (gpio_node == NULL)
gpio_node = of_find_node_by_name(NULL,
"pmu-interrupt");
- if (gpio_node && gpio_node->n_intrs > 0)
- gpio_irq = gpio_node->intrs[0].line;
+ if (gpio_node)
+ gpio_irq = irq_of_parse_and_map(gpio_node, 0);
- if (gpio_irq != -1) {
+ if (gpio_irq != NO_IRQ) {
if (request_irq(gpio_irq, gpio1_interrupt, 0,
"GPIO1 ADB", (void *)0))
printk(KERN_ERR "pmu: can't get irq %d"
return -ENODEV;
#ifdef CONFIG_PMAC_BACKLIGHT
- /* Enable backlight */
- register_backlight_controller(&pmu_backlight_controller, NULL, "pmu");
-#endif /* CONFIG_PMAC_BACKLIGHT */
+ /* Initialize backlight */
+ pmu_backlight_init();
+#endif
#ifdef CONFIG_PPC32
if (machine_is_compatible("AAPL,3400/2400") ||
else if ((1 << pirq) & PMU_INT_SNDBRT) {
#ifdef CONFIG_PMAC_BACKLIGHT
if (len == 3)
-#ifdef CONFIG_INPUT_ADBHID
- if (!disable_kernel_backlight)
-#endif /* CONFIG_INPUT_ADBHID */
- set_backlight_level(data[1] >> 4);
-#endif /* CONFIG_PMAC_BACKLIGHT */
+ pmac_backlight_set_legacy_brightness_pmu(data[1] >> 4);
+#endif
}
/* Tick interrupt */
else if ((1 << pirq) & PMU_INT_TICK) {
if (pmu_battery_count)
query_battery_state();
pmu_pass_intr(data, len);
+ /* len == 6 is probably a bad check. But how do I
+ * know what PMU versions send what events here? */
+ if (len == 6) {
+ via_pmu_event(PMU_EVT_POWER, !!(data[1]&8));
+ via_pmu_event(PMU_EVT_LID, data[1]&1);
+ }
} else {
pmu_pass_intr(data, len);
}
return IRQ_NONE;
}
-#ifdef CONFIG_PMAC_BACKLIGHT
-static int backlight_to_bright[] = {
- 0x7f, 0x46, 0x42, 0x3e, 0x3a, 0x36, 0x32, 0x2e,
- 0x2a, 0x26, 0x22, 0x1e, 0x1a, 0x16, 0x12, 0x0e
-};
-
-static int
-pmu_set_backlight_enable(int on, int level, void* data)
-{
- struct adb_request req;
-
- if (vias == NULL)
- return -ENODEV;
-
- if (on) {
- pmu_request(&req, NULL, 2, PMU_BACKLIGHT_BRIGHT,
- backlight_to_bright[level]);
- pmu_wait_complete(&req);
- }
- pmu_request(&req, NULL, 2, PMU_POWER_CTRL,
- PMU_POW_BACKLIGHT | (on ? PMU_POW_ON : PMU_POW_OFF));
- pmu_wait_complete(&req);
-
- return 0;
-}
-
-static void
-pmu_bright_complete(struct adb_request *req)
-{
- if (req == &bright_req_1)
- clear_bit(1, &async_req_locks);
- if (req == &bright_req_2)
- clear_bit(2, &async_req_locks);
-}
-
-static int
-pmu_set_backlight_level(int level, void* data)
-{
- if (vias == NULL)
- return -ENODEV;
-
- if (test_and_set_bit(1, &async_req_locks))
- return -EAGAIN;
- pmu_request(&bright_req_1, pmu_bright_complete, 2, PMU_BACKLIGHT_BRIGHT,
- backlight_to_bright[level]);
- if (test_and_set_bit(2, &async_req_locks))
- return -EAGAIN;
- pmu_request(&bright_req_2, pmu_bright_complete, 2, PMU_POWER_CTRL,
- PMU_POW_BACKLIGHT | (level > BACKLIGHT_OFF ?
- PMU_POW_ON : PMU_POW_OFF));
-
- return 0;
-}
-#endif /* CONFIG_PMAC_BACKLIGHT */
-
void
pmu_enable_irled(int on)
{
out_8(&via[IER], IER_SET | SR_INT | CB1_INT);
}
+extern void pmu_backlight_set_sleep(int sleep);
+
static int
pmac_suspend_devices(void)
{
return -EBUSY;
}
+#ifdef CONFIG_PMAC_BACKLIGHT
+ /* Tell backlight code not to muck around with the chip anymore */
+ pmu_backlight_set_sleep(1);
+#endif
+
/* Call platform functions marked "on sleep" */
pmac_pfunc_i2c_suspend();
pmac_pfunc_base_suspend();
return -EBUSY;
}
- /* Wait for completion of async backlight requests */
- while (!bright_req_1.complete || !bright_req_2.complete ||
- !batt_req.complete)
+ /* Wait for completion of async requests */
+ while (!batt_req.complete)
pmu_poll();
/* Giveup the lazy FPU & vec so we don't have to back them
{
mdelay(100);
+#ifdef CONFIG_PMAC_BACKLIGHT
+ /* Tell backlight code it can use the chip again */
+ pmu_backlight_set_sleep(0);
+#endif
+
/* Power back up system devices (including the PIC) */
device_power_up();
_set_L2CR(save_l2cr);
/* Restore userland MMU context */
- set_context(current->active_mm->context, current->active_mm->pgd);
+ set_context(current->active_mm->context.id, current->active_mm->pgd);
/* Power things up */
pmu_unlock();
_set_L3CR(save_l3cr);
/* Restore userland MMU context */
- set_context(current->active_mm->context, current->active_mm->pgd);
+ set_context(current->active_mm->context.id, current->active_mm->pgd);
/* Tell PMU we are ready */
pmu_unlock();
spinlock_t lock;
#if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT)
int backlight_locker;
-#endif /* defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) */
+#endif
};
static LIST_HEAD(all_pmu_pvt);
spin_lock_irqsave(&all_pvt_lock, flags);
#if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT)
pp->backlight_locker = 0;
-#endif /* defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) */
+#endif
list_add(&pp->list, &all_pmu_pvt);
spin_unlock_irqrestore(&all_pvt_lock, flags);
file->private_data = pp;
spin_lock_irqsave(&all_pvt_lock, flags);
list_del(&pp->list);
spin_unlock_irqrestore(&all_pvt_lock, flags);
+
#if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT)
- if (pp->backlight_locker) {
- spin_lock_irqsave(&pmu_lock, flags);
- disable_kernel_backlight--;
- spin_unlock_irqrestore(&pmu_lock, flags);
- }
-#endif /* defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) */
+ if (pp->backlight_locker)
+ pmac_backlight_enable();
+#endif
+
kfree(pp);
}
unlock_kernel();
return put_user(1, argp);
#endif /* CONFIG_PM && CONFIG_PPC32 */
-#ifdef CONFIG_PMAC_BACKLIGHT
- /* Backlight should have its own device or go via
- * the fbdev
- */
+#ifdef CONFIG_PMAC_BACKLIGHT_LEGACY
+ /* Compatibility ioctl's for backlight */
case PMU_IOC_GET_BACKLIGHT:
+ {
+ int brightness;
+
if (sleep_in_progress)
return -EBUSY;
- error = get_backlight_level();
- if (error < 0)
- return error;
- return put_user(error, argp);
+
+ brightness = pmac_backlight_get_legacy_brightness();
+ if (brightness < 0)
+ return brightness;
+ else
+ return put_user(brightness, argp);
+
+ }
case PMU_IOC_SET_BACKLIGHT:
{
- __u32 value;
+ int brightness;
+
if (sleep_in_progress)
return -EBUSY;
- error = get_user(value, argp);
- if (!error)
- error = set_backlight_level(value);
- break;
+
+ error = get_user(brightness, argp);
+ if (error)
+ return error;
+
+ return pmac_backlight_set_legacy_brightness(brightness);
}
#ifdef CONFIG_INPUT_ADBHID
case PMU_IOC_GRAB_BACKLIGHT: {
struct pmu_private *pp = filp->private_data;
- unsigned long flags;
if (pp->backlight_locker)
return 0;
+
pp->backlight_locker = 1;
- spin_lock_irqsave(&pmu_lock, flags);
- disable_kernel_backlight++;
- spin_unlock_irqrestore(&pmu_lock, flags);
+ pmac_backlight_disable();
+
return 0;
}
#endif /* CONFIG_INPUT_ADBHID */
-#endif /* CONFIG_PMAC_BACKLIGHT */
+#endif /* CONFIG_PMAC_BACKLIGHT_LEGACY */
+
case PMU_IOC_GET_MODEL:
return put_user(pmu_kind, argp);
case PMU_IOC_HAS_ADB:
git://git.onelab.eu / linux-2.6.git / blobdiff