module_param(enable_pid_filtering, int, 0444);
MODULE_PARM_DESC(enable_pid_filtering, "enable hardware pid filtering: supported values: 0 (fullts), 1");
+static int irq_chk_intv;
+module_param(irq_chk_intv, int, 0644);
+MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ watchdog (currently just debugging).");
+
#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
#define dprintk(level,args...) \
do { if ((debug & level)) printk(args); } while (0)
#define deb_reg(args...) dprintk(0x02,args)
#define deb_ts(args...) dprintk(0x04,args)
#define deb_irq(args...) dprintk(0x08,args)
+#define deb_chk(args...) dprintk(0x10,args)
static int debug = 0;
module_param(debug, int, 0644);
spinlock_t irq_lock;
+ unsigned long last_irq;
+
+ struct work_struct irq_check_work;
+
struct flexcop_device *fc_dev;
};
return 0;
}
+static void flexcop_pci_irq_check_work(void *data)
+{
+ struct flexcop_pci *fc_pci = data;
+ struct flexcop_device *fc = fc_pci->fc_dev;
+
+ flexcop_ibi_value v = fc->read_ibi_reg(fc,sram_dest_reg_714);
+
+ flexcop_dump_reg(fc_pci->fc_dev,dma1_000,4);
+
+ if (v.sram_dest_reg_714.net_ovflow_error)
+ deb_chk("sram net_ovflow_error\n");
+ if (v.sram_dest_reg_714.media_ovflow_error)
+ deb_chk("sram media_ovflow_error\n");
+ if (v.sram_dest_reg_714.cai_ovflow_error)
+ deb_chk("sram cai_ovflow_error\n");
+ if (v.sram_dest_reg_714.cai_ovflow_error)
+ deb_chk("sram cai_ovflow_error\n");
+
+ schedule_delayed_work(&fc_pci->irq_check_work,
+ msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv));
+}
+
/* When PID filtering is turned on, we use the timer IRQ, because small amounts
* of data need to be passed to the user space instantly as well. When PID
* filtering is turned off, we use the page-change-IRQ */
-static irqreturn_t flexcop_pci_irq(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t flexcop_pci_isr(int irq, void *dev_id, struct pt_regs *regs)
{
struct flexcop_pci *fc_pci = dev_id;
struct flexcop_device *fc = fc_pci->fc_dev;
- flexcop_ibi_value v = fc->read_ibi_reg(fc,irq_20c);
+ flexcop_ibi_value v;
irqreturn_t ret = IRQ_HANDLED;
spin_lock_irq(&fc_pci->irq_lock);
+ v = fc->read_ibi_reg(fc,irq_20c);
+
+ /* errors */
+ if (v.irq_20c.Data_receiver_error)
+ deb_chk("data receiver error\n");
+ if (v.irq_20c.Continuity_error_flag)
+ deb_chk("Contunuity error flag is set\n");
+ if (v.irq_20c.LLC_SNAP_FLAG_set)
+ deb_chk("LLC_SNAP_FLAG_set is set\n");
+ if (v.irq_20c.Transport_Error)
+ deb_chk("Transport error\n");
+
+ if ((fc_pci->count % 1000) == 0)
+ deb_chk("%d valid irq took place so far\n",fc_pci->count);
+
if (v.irq_20c.DMA1_IRQ_Status == 1) {
if (fc_pci->active_dma1_addr == 0)
flexcop_pass_dmx_packets(fc_pci->fc_dev,fc_pci->dma[0].cpu_addr0,fc_pci->dma[0].size / 188);
fc->read_ibi_reg(fc,dma1_008).dma_0x8.dma_cur_addr << 2;
u32 cur_pos = cur_addr - fc_pci->dma[0].dma_addr0;
- deb_irq("irq: %08x cur_addr: %08x: cur_pos: %08x, last_cur_pos: %08x ",
- v.raw,cur_addr,cur_pos,fc_pci->last_dma1_cur_pos);
+ deb_irq("%u irq: %08x cur_addr: %llx: cur_pos: %08x, last_cur_pos: %08x ",
+ jiffies_to_usecs(jiffies - fc_pci->last_irq),
+ v.raw, (unsigned long long)cur_addr, cur_pos,
+ fc_pci->last_dma1_cur_pos);
+ fc_pci->last_irq = jiffies;
/* buffer end was reached, restarted from the beginning
* pass the data from last_cur_pos to the buffer end to the demux
fc_pci->dma[0].cpu_addr0 + fc_pci->last_dma1_cur_pos,
(fc_pci->dma[0].size*2) - fc_pci->last_dma1_cur_pos);
fc_pci->last_dma1_cur_pos = 0;
- fc_pci->count = 0;
}
if (cur_pos > fc_pci->last_dma1_cur_pos) {
deb_irq("\n");
fc_pci->last_dma1_cur_pos = cur_pos;
- } else
+ fc_pci->count++;
+ } else {
+ deb_irq("isr for flexcop called, apparently without reason (%08x)\n",v.raw);
ret = IRQ_NONE;
+ }
spin_unlock_irq(&fc_pci->irq_lock);
-/* packet count would be ideal for hw filtering, but it isn't working. Either
- * the data book is wrong, or I'm unable to read it correctly */
-
-/* if (v.irq_20c.DMA1_Size_IRQ_Status == 1) { packet counter */
-
return ret;
}
{
struct flexcop_pci *fc_pci = fc->bus_specific;
if (onoff) {
- flexcop_dma_config(fc,&fc_pci->dma[0],FC_DMA_1,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1);
- flexcop_dma_config(fc,&fc_pci->dma[1],FC_DMA_2,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1);
- flexcop_dma_config_timer(fc,FC_DMA_1,1);
+ flexcop_dma_config(fc,&fc_pci->dma[0],FC_DMA_1);
+ flexcop_dma_config(fc,&fc_pci->dma[1],FC_DMA_2);
- if (fc_pci->fc_dev->pid_filtering) {
- fc_pci->last_dma1_cur_pos = 0;
- flexcop_dma_control_timer_irq(fc,FC_DMA_1,1);
- } else {
- fc_pci->active_dma1_addr = 0;
- flexcop_dma_control_size_irq(fc,FC_DMA_1,1);
- }
+ flexcop_dma_config_timer(fc,FC_DMA_1,0);
-/* flexcop_dma_config_packet_count(fc,FC_DMA_1,0xc0);
- flexcop_dma_control_packet_irq(fc,FC_DMA_1,1); */
+ flexcop_dma_xfer_control(fc,FC_DMA_1,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1,1);
+ deb_irq("DMA xfer enabled\n");
- deb_irq("irqs enabled\n");
+ fc_pci->last_dma1_cur_pos = 0;
+ flexcop_dma_control_timer_irq(fc,FC_DMA_1,1);
+ deb_irq("IRQ enabled\n");
+
+// fc_pci->active_dma1_addr = 0;
+// flexcop_dma_control_size_irq(fc,FC_DMA_1,1);
+
+ if (irq_chk_intv > 0)
+ schedule_delayed_work(&fc_pci->irq_check_work,
+ msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv));
} else {
- if (fc_pci->fc_dev->pid_filtering)
- flexcop_dma_control_timer_irq(fc,FC_DMA_1,0);
- else
- flexcop_dma_control_size_irq(fc,FC_DMA_1,0);
+ if (irq_chk_intv > 0)
+ cancel_delayed_work(&fc_pci->irq_check_work);
+
+ flexcop_dma_control_timer_irq(fc,FC_DMA_1,0);
+ deb_irq("IRQ disabled\n");
-// flexcop_dma_control_packet_irq(fc,FC_DMA_1,0);
- deb_irq("irqs disabled\n");
+// flexcop_dma_control_size_irq(fc,FC_DMA_1,0);
+
+ flexcop_dma_xfer_control(fc,FC_DMA_1,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1,0);
+ deb_irq("DMA xfer disabled\n");
}
return 0;
flexcop_sram_set_dest(fc_pci->fc_dev,FC_SRAM_DEST_CAO | FC_SRAM_DEST_CAI, FC_SRAM_DEST_TARGET_DMA2);
fc_pci->init_state |= FC_PCI_DMA_INIT;
+
goto success;
dma1_free:
flexcop_dma_free(&fc_pci->dma[0]);
pci_set_drvdata(fc_pci->pdev, fc_pci);
- if ((ret = request_irq(fc_pci->pdev->irq, flexcop_pci_irq,
+ if ((ret = request_irq(fc_pci->pdev->irq, flexcop_pci_isr,
SA_SHIRQ, DRIVER_NAME, fc_pci)) != 0)
goto err_pci_iounmap;
if ((ret = flexcop_pci_dma_init(fc_pci)) != 0)
goto err_fc_exit;
+ INIT_WORK(&fc_pci->irq_check_work, flexcop_pci_irq_check_work, fc_pci);
+
goto success;
err_fc_exit:
flexcop_device_exit(fc);
static struct pci_device_id flexcop_pci_tbl[] = {
{ PCI_DEVICE(0x13d0, 0x2103) },
-/* { PCI_DEVICE(0x13d0, 0x2200) }, PCI FlexCopIII ? */
+/* { PCI_DEVICE(0x13d0, 0x2200) }, ? */
{ },
};
MODULE_DEVICE_TABLE(pci, flexcop_pci_tbl);
static struct pci_driver flexcop_pci_driver = {
- .name = "Technisat/B2C2 FlexCop II/IIb/III PCI",
+ .name = "b2c2_flexcop_pci",
.id_table = flexcop_pci_tbl,
- .probe = flexcop_pci_probe,
- .remove = flexcop_pci_remove,
+ .probe = flexcop_pci_probe,
+ .remove = flexcop_pci_remove,
};
static int __init flexcop_pci_module_init(void)
git://git.onelab.eu / linux-2.6.git / blobdiff