This commit was manufactured by cvs2svn to create branch 'vserver'.

[linux-2.6.git] / drivers / media / dvb / dvb-usb / gp8psk.h

diff --git a/drivers/media/dvb/dvb-usb/gp8psk.h b/drivers/media/dvb/dvb-usb/gp8psk.h
new file mode 100644 (file)
index 0000000..3eba706
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/gp8psk.h
@@ -0,0 +1,79 @@
+/* DVB USB compliant Linux driver for the
+ *  - GENPIX 8pks/qpsk USB2.0 DVB-S module
+ *
+ * Copyright (C) 2006 Alan Nisota (alannisota@gmail.com)
+ *
+ * Thanks to GENPIX for the sample code used to implement this module.
+ *
+ * This module is based off the vp7045 and vp702x modules
+ *
+ *     This program is free software; you can redistribute it and/or modify it
+ *     under the terms of the GNU General Public License as published by the Free
+ *     Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#ifndef _DVB_USB_GP8PSK_H_
+#define _DVB_USB_GP8PSK_H_
+
+#define DVB_USB_LOG_PREFIX "gp8psk"
+#include "dvb-usb.h"
+
+extern int dvb_usb_gp8psk_debug;
+#define deb_info(args...) dprintk(dvb_usb_gp8psk_debug,0x01,args)
+#define deb_xfer(args...) dprintk(dvb_usb_gp8psk_debug,0x02,args)
+#define deb_rc(args...)   dprintk(dvb_usb_gp8psk_debug,0x04,args)
+#define deb_fe(args...)   dprintk(dvb_usb_gp8psk_debug,0x08,args)
+/* gp8psk commands */
+
+/* Twinhan Vendor requests */
+#define TH_COMMAND_IN                     0xC0
+#define TH_COMMAND_OUT                    0xC1
+
+/* command bytes */
+#define GET_8PSK_CONFIG                 0x80
+#define SET_8PSK_CONFIG                 0x81
+#define ARM_TRANSFER                    0x85
+#define TUNE_8PSK                       0x86
+#define GET_SIGNAL_STRENGTH             0x87
+#define LOAD_BCM4500                    0x88
+#define BOOT_8PSK                       0x89
+#define START_INTERSIL                  0x8A
+#define SET_LNB_VOLTAGE                 0x8B
+#define SET_22KHZ_TONE                  0x8C
+#define SEND_DISEQC_COMMAND             0x8D
+#define SET_DVB_MODE                    0x8E
+#define SET_DN_SWITCH                   0x8F
+#define GET_SIGNAL_LOCK                 0x90
+
+/* Satellite modulation modes */
+#define ADV_MOD_DVB_QPSK 0     /* DVB-S QPSK */
+#define ADV_MOD_TURBO_QPSK 1   /* Turbo QPSK */
+#define ADV_MOD_TURBO_8PSK 2   /* Turbo 8PSK (also used for Trellis 8PSK) */
+#define ADV_MOD_TURBO_16QAM 3  /* Turbo 16QAM (also used for Trellis 8PSK) */
+
+#define ADV_MOD_DCII_C_QPSK 4  /* Digicipher II Combo */
+#define ADV_MOD_DCII_I_QPSK 5  /* Digicipher II I-stream */
+#define ADV_MOD_DCII_Q_QPSK 6  /* Digicipher II Q-stream */
+#define ADV_MOD_DCII_C_OQPSK 7 /* Digicipher II offset QPSK */
+#define ADV_MOD_DSS_QPSK 8     /* DSS (DIRECTV) QPSK */
+#define ADV_MOD_DVB_BPSK 9     /* DVB-S BPSK */
+
+#define GET_USB_SPEED                     0x07
+ #define USB_SPEED_LOW                    0
+ #define USB_SPEED_FULL                   1
+ #define USB_SPEED_HIGH                   2
+
+#define RESET_FX2                         0x13
+
+#define FW_VERSION_READ                   0x0B
+#define VENDOR_STRING_READ                0x0C
+#define PRODUCT_STRING_READ               0x0D
+#define FW_BCD_VERSION_READ               0x14
+
+extern struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d);
+extern int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen);
+extern int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
+                            u16 index, u8 *b, int blen);
+
+#endif