#include "stv0299.h"
#include "tda10021.h"
#include "tda1004x.h"
+#include "dvb-pll.h"
#include <media/saa7146_vv.h>
#include <linux/module.h>
#include <linux/errno.h>
struct dvb_ca_en50221 ca;
};
-/* GPIO CI Connections:
- * 0 - Vcc/Reset (Reset is controlled by capacitor)
- * 1 - Attribute Memory
- * 2 - Card Enable (Active Low)
- * 3 - Card Detect
+/* GPIO Connections:
+ * 0 - Vcc/Reset (Reset is controlled by capacitor). Resets the frontend *AS WELL*!
+ * 1 - CI memory select 0=>IO memory, 1=>Attribute Memory
+ * 2 - CI Card Enable (Active Low)
+ * 3 - CI Card Detect
*/
/****************************************************************************
saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
udelay(1);
- result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 0);
+ result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 1);
if (result == -ETIMEDOUT)
budget_av->slot_status = 0;
saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
udelay(1);
- result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 0);
+ result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 1);
if (result == -ETIMEDOUT)
budget_av->slot_status = 0;
while (--timeout > 0 && ciintf_read_attribute_mem(ca, slot, 0) != 0x1d)
msleep(100);
+ /* reinitialise the frontend */
+ dvb_frontend_reinitialise(budget_av->budget.dvb_frontend);
+
if (timeout <= 0)
{
printk(KERN_ERR "budget-av: cam reset failed (timeout).\n");
saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
- saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */
return -ETIMEDOUT;
}
{
struct budget_av *budget_av = (struct budget_av *) ca->data;
struct saa7146_dev *saa = budget_av->budget.dev;
+ int cam_present = 0;
if (slot != 0)
return -EINVAL;
- if (!budget_av->slot_status) {
+ if (!budget_av->slot_status)
+ {
+ // first of all test the card detect line
saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
udelay(1);
if (saa7146_read(saa, PSR) & MASK_06)
{
+ cam_present = 1;
+ }
+ saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
+
+ // that is unreliable however, so try and read from IO memory
+ if (!cam_present)
+ {
+ saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
+ if (ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1) != -ETIMEDOUT)
+ {
+ cam_present = 1;
+ }
+ }
+
+ // did we find something?
+ if (cam_present) {
printk(KERN_INFO "budget-av: cam inserted\n");
budget_av->slot_status = 1;
}
- saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
} else if (!open) {
saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
if (ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1) == -ETIMEDOUT)
{
printk(KERN_INFO "budget-av: cam ejected\n");
saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
- saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */
budget_av->slot_status = 0;
}
}
}
static int philips_su1278_ty_ci_pll_set(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
struct dvb_frontend_parameters *params)
{
- struct budget_av *budget_av = (struct budget_av *) fe->dvb->priv;
u32 div;
u8 buf[4];
struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) };
else if (params->frequency < 2150000)
buf[3] |= 0xC0;
- if (i2c_transfer(&budget_av->budget.i2c_adap, &msg, 1) != 1)
+ if (i2c_transfer(i2c, &msg, 1) != 1)
+ return -EIO;
+ return 0;
+}
+
+#define MIN2(a,b) ((a) < (b) ? (a) : (b))
+#define MIN3(a,b,c) MIN2(MIN2(a,b),c)
+
+static int philips_su1278sh2_tua6100_pll_set(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct dvb_frontend_parameters *params)
+{
+ u8 reg0 [2] = { 0x00, 0x00 };
+ u8 reg1 [4] = { 0x01, 0x00, 0x00, 0x00 };
+ u8 reg2 [3] = { 0x02, 0x00, 0x00 };
+ int _fband;
+ int first_ZF;
+ int R, A, N, P, M;
+ struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = NULL,.len = 0 };
+ int freq = params->frequency;
+
+ first_ZF = (freq) / 1000;
+
+ if (abs(MIN2(abs(first_ZF-1190),abs(first_ZF-1790))) <
+ abs(MIN3(abs(first_ZF-1202),abs(first_ZF-1542),abs(first_ZF-1890))))
+ _fband = 2;
+ else
+ _fband = 3;
+
+ if (_fband == 2) {
+ if (((first_ZF >= 950) && (first_ZF < 1350)) ||
+ ((first_ZF >= 1430) && (first_ZF < 1950)))
+ reg0[1] = 0x07;
+ else if (((first_ZF >= 1350) && (first_ZF < 1430)) ||
+ ((first_ZF >= 1950) && (first_ZF < 2150)))
+ reg0[1] = 0x0B;
+ }
+
+ if(_fband == 3) {
+ if (((first_ZF >= 950) && (first_ZF < 1350)) ||
+ ((first_ZF >= 1455) && (first_ZF < 1950)))
+ reg0[1] = 0x07;
+ else if (((first_ZF >= 1350) && (first_ZF < 1420)) ||
+ ((first_ZF >= 1950) && (first_ZF < 2150)))
+ reg0[1] = 0x0B;
+ else if ((first_ZF >= 1420) && (first_ZF < 1455))
+ reg0[1] = 0x0F;
+ }
+
+ if (first_ZF > 1525)
+ reg1[1] |= 0x80;
+ else
+ reg1[1] &= 0x7F;
+
+ if (_fband == 2) {
+ if (first_ZF > 1430) { /* 1430MHZ */
+ reg1[1] &= 0xCF; /* N2 */
+ reg2[1] &= 0xCF; /* R2 */
+ reg2[1] |= 0x10;
+ } else {
+ reg1[1] &= 0xCF; /* N2 */
+ reg1[1] |= 0x20;
+ reg2[1] &= 0xCF; /* R2 */
+ reg2[1] |= 0x10;
+ }
+ }
+
+ if (_fband == 3) {
+ if ((first_ZF >= 1455) &&
+ (first_ZF < 1630)) {
+ reg1[1] &= 0xCF; /* N2 */
+ reg1[1] |= 0x20;
+ reg2[1] &= 0xCF; /* R2 */
+ } else {
+ if (first_ZF < 1455) {
+ reg1[1] &= 0xCF; /* N2 */
+ reg1[1] |= 0x20;
+ reg2[1] &= 0xCF; /* R2 */
+ reg2[1] |= 0x10;
+ } else {
+ if (first_ZF >= 1630) {
+ reg1[1] &= 0xCF; /* N2 */
+ reg2[1] &= 0xCF; /* R2 */
+ reg2[1] |= 0x10;
+ }
+ }
+ }
+ }
+
+ /* set ports, enable P0 for symbol rates > 4Ms/s */
+ if (params->u.qpsk.symbol_rate >= 4000000)
+ reg1[1] |= 0x0c;
+ else
+ reg1[1] |= 0x04;
+
+ reg2[1] |= 0x0c;
+
+ R = 64;
+ A = 64;
+ P = 64; //32
+
+ M = (freq * R) / 4; /* in Mhz */
+ N = (M - A * 1000) / (P * 1000);
+
+ reg1[1] |= (N >> 9) & 0x03;
+ reg1[2] = (N >> 1) & 0xff;
+ reg1[3] = (N << 7) & 0x80;
+
+ reg2[1] |= (R >> 8) & 0x03;
+ reg2[2] = R & 0xFF; /* R */
+
+ reg1[3] |= A & 0x7f; /* A */
+
+ if (P == 64)
+ reg1[1] |= 0x40; /* Prescaler 64/65 */
+
+ reg0[1] |= 0x03;
+
+ /* already enabled - do not reenable i2c repeater or TX fails */
+ msg.buf = reg0;
+ msg.len = sizeof(reg0);
+ if (i2c_transfer(i2c, &msg, 1) != 1)
return -EIO;
+
+ stv0299_enable_plli2c(fe);
+ msg.buf = reg1;
+ msg.len = sizeof(reg1);
+ if (i2c_transfer(i2c, &msg, 1) != 1)
+ return -EIO;
+
+ stv0299_enable_plli2c(fe);
+ msg.buf = reg2;
+ msg.len = sizeof(reg2);
+ if (i2c_transfer(i2c, &msg, 1) != 1)
+ return -EIO;
+
return 0;
}
0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
0x10, 0x3f, // AGC2 0x3d
0x11, 0x84,
- 0x12, 0xb5, // Lock detect: -64 Carrier freq detect:on
+ 0x12, 0xb9,
0x15, 0xc9, // lock detector threshold
0x16, 0x00,
0x17, 0x00,
.inittab = typhoon_cinergy1200s_inittab,
.mclk = 88000000UL,
.invert = 0,
- .enhanced_tuning = 0,
.skip_reinit = 0,
.lock_output = STV0229_LOCKOUTPUT_1,
.volt13_op0_op1 = STV0299_VOLT13_OP0,
.inittab = typhoon_cinergy1200s_inittab,
.mclk = 88000000UL,
.invert = 0,
- .enhanced_tuning = 0,
.skip_reinit = 0,
.lock_output = STV0229_LOCKOUTPUT_0,
.volt13_op0_op1 = STV0299_VOLT13_OP0,
.pll_set = philips_su1278_ty_ci_pll_set,
};
+static struct stv0299_config cinergy_1200s_1894_0010_config = {
+ .demod_address = 0x68,
+ .inittab = typhoon_cinergy1200s_inittab,
+ .mclk = 88000000UL,
+ .invert = 1,
+ .skip_reinit = 0,
+ .lock_output = STV0229_LOCKOUTPUT_1,
+ .volt13_op0_op1 = STV0299_VOLT13_OP0,
+ .min_delay_ms = 100,
+ .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
+ .pll_set = philips_su1278sh2_tua6100_pll_set,
+};
static int philips_cu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
{
buf[0] = (div >> 8) & 0x7f;
buf[1] = div & 0xff;
- buf[2] = 0x8e;
- buf[3] = (params->frequency < 174500000 ? 0xa1 :
- params->frequency < 454000000 ? 0x92 : 0x34);
+ buf[2] = 0x86;
+ buf[3] = (params->frequency < 150000000 ? 0x01 :
+ params->frequency < 445000000 ? 0x02 : 0x04);
if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
return -EIO;
.demod_address = 0x8,
.invert = 1,
.invert_oclk = 1,
+ .xtal_freq = TDA10046_XTAL_4M,
+ .agc_config = TDA10046_AGC_DEFAULT,
+ .if_freq = TDA10046_FREQ_3617,
.pll_init = philips_tu1216_pll_init,
.pll_set = philips_tu1216_pll_set,
+ .pll_sleep = NULL,
.request_firmware = philips_tu1216_request_firmware,
};
+static u8 philips_sd1878_inittab[] = {
+ 0x01, 0x15,
+ 0x02, 0x30,
+ 0x03, 0x00,
+ 0x04, 0x7d,
+ 0x05, 0x35,
+ 0x06, 0x40,
+ 0x07, 0x00,
+ 0x08, 0x43,
+ 0x09, 0x02,
+ 0x0C, 0x51,
+ 0x0D, 0x82,
+ 0x0E, 0x23,
+ 0x10, 0x3f,
+ 0x11, 0x84,
+ 0x12, 0xb9,
+ 0x15, 0xc9,
+ 0x16, 0x19,
+ 0x17, 0x8c,
+ 0x18, 0x59,
+ 0x19, 0xf8,
+ 0x1a, 0xfe,
+ 0x1c, 0x7f,
+ 0x1d, 0x00,
+ 0x1e, 0x00,
+ 0x1f, 0x50,
+ 0x20, 0x00,
+ 0x21, 0x00,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x28, 0x00,
+ 0x29, 0x28,
+ 0x2a, 0x14,
+ 0x2b, 0x0f,
+ 0x2c, 0x09,
+ 0x2d, 0x09,
+ 0x31, 0x1f,
+ 0x32, 0x19,
+ 0x33, 0xfc,
+ 0x34, 0x93,
+ 0xff, 0xff
+};
+
+static int philips_sd1878_tda8261_pll_set(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct dvb_frontend_parameters *params)
+{
+ u8 buf[4];
+ int rc;
+ struct i2c_msg tuner_msg = {.addr=0x60,.flags=0,.buf=buf,.len=sizeof(buf)};
+
+ if((params->frequency < 950000) || (params->frequency > 2150000))
+ return -EINVAL;
+
+ rc=dvb_pll_configure(&dvb_pll_philips_sd1878_tda8261, buf,
+ params->frequency, 0);
+ if(rc < 0) return rc;
+
+ if(i2c_transfer(i2c, &tuner_msg, 1) != 1)
+ return -EIO;
+
+ return 0;
+}
+
+static int philips_sd1878_ci_set_symbol_rate(struct dvb_frontend *fe,
+ u32 srate, u32 ratio)
+{
+ u8 aclk = 0;
+ u8 bclk = 0;
+ u8 m1;
+
+ aclk = 0xb5;
+ if (srate < 2000000)
+ bclk = 0x86;
+ else if (srate < 5000000)
+ bclk = 0x89;
+ else if (srate < 15000000)
+ bclk = 0x8f;
+ else if (srate < 45000000)
+ bclk = 0x95;
+
+ m1 = 0x14;
+ if (srate < 4000000)
+ m1 = 0x10;
+
+ stv0299_writereg(fe, 0x0e, 0x23);
+ stv0299_writereg(fe, 0x0f, 0x94);
+ stv0299_writereg(fe, 0x10, 0x39);
+ stv0299_writereg(fe, 0x13, aclk);
+ stv0299_writereg(fe, 0x14, bclk);
+ stv0299_writereg(fe, 0x15, 0xc9);
+ stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+ stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
+ stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
+ stv0299_writereg(fe, 0x0f, 0x80 | m1);
+ return 0;
+}
+static struct stv0299_config philips_sd1878_config = {
+ .demod_address = 0x68,
+ .inittab = philips_sd1878_inittab,
+ .mclk = 88000000UL,
+ .invert = 0,
+ .skip_reinit = 0,
+ .lock_output = STV0229_LOCKOUTPUT_1,
+ .volt13_op0_op1 = STV0299_VOLT13_OP0,
+ .min_delay_ms = 100,
+ .set_symbol_rate = philips_sd1878_ci_set_symbol_rate,
+ .pll_set = philips_sd1878_tda8261_pll_set,
+};
static u8 read_pwm(struct budget_av *budget_av)
{
#define SUBID_DVBS_KNC1_PLUS 0x0011
#define SUBID_DVBS_TYPHOON 0x4f56
#define SUBID_DVBS_CINERGY1200 0x1154
+#define SUBID_DVBS_CYNERGY1200N 0x1155
+#define SUBID_DVBS_TV_STAR 0x0014
+#define SUBID_DVBS_TV_STAR_CI 0x0016
+#define SUBID_DVBS_EASYWATCH 0x001e
#define SUBID_DVBC_KNC1 0x0020
#define SUBID_DVBC_KNC1_PLUS 0x0021
#define SUBID_DVBC_CINERGY1200 0x1156
case SUBID_DVBC_KNC1_PLUS:
case SUBID_DVBT_KNC1_PLUS:
// Enable / PowerON Frontend
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI);
break;
}
switch (saa->pci->subsystem_device) {
case SUBID_DVBS_KNC1:
+ if (saa->pci->subsystem_vendor == 0x1894) {
+ fe = stv0299_attach(&cinergy_1200s_1894_0010_config,
+ &budget_av->budget.i2c_adap);
+ } else {
+ fe = stv0299_attach(&typhoon_config,
+ &budget_av->budget.i2c_adap);
+ }
+ break;
+
+ case SUBID_DVBS_TV_STAR:
+ case SUBID_DVBS_TV_STAR_CI:
+ case SUBID_DVBS_CYNERGY1200N:
+ case SUBID_DVBS_EASYWATCH:
+ fe = stv0299_attach(&philips_sd1878_config,
+ &budget_av->budget.i2c_adap);
+ break;
+
case SUBID_DVBS_KNC1_PLUS:
case SUBID_DVBS_TYPHOON:
fe = stv0299_attach(&typhoon_config,
dprintk(2, "dev: %p\n", dev);
- if (!(budget_av = kmalloc(sizeof(struct budget_av), GFP_KERNEL)))
+ if (!(budget_av = kzalloc(sizeof(struct budget_av), GFP_KERNEL)))
return -ENOMEM;
- memset(budget_av, 0, sizeof(struct budget_av));
-
budget_av->has_saa7113 = 0;
budget_av->budget.ci_present = 0;
SAA7146_HPS_SYNC_PORT_A);
saa7113_setinput(budget_av, 0);
- } else {
- ciintf_init(budget_av);
}
/* fixme: find some sane values here... */
budget_av->budget.dvb_adapter.priv = budget_av;
frontend_init(budget_av);
+ if (!budget_av->has_saa7113) {
+ ciintf_init(budget_av);
+ }
+
return 0;
}
MAKE_BUDGET_INFO(knc1s, "KNC1 DVB-S", BUDGET_KNC1S);
MAKE_BUDGET_INFO(knc1c, "KNC1 DVB-C", BUDGET_KNC1C);
MAKE_BUDGET_INFO(knc1t, "KNC1 DVB-T", BUDGET_KNC1T);
+MAKE_BUDGET_INFO(kncxs, "KNC TV STAR DVB-S", BUDGET_TVSTAR);
+MAKE_BUDGET_INFO(satewpls, "Satelco EasyWatch DVB-S light", BUDGET_TVSTAR);
MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP);
MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP);
MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP);
MAKE_BUDGET_INFO(cin1200s, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
+MAKE_BUDGET_INFO(cin1200sn, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
MAKE_BUDGET_INFO(cin1200c, "Terratec Cinergy 1200 DVB-C", BUDGET_CIN1200C);
MAKE_BUDGET_INFO(cin1200t, "Terratec Cinergy 1200 DVB-T", BUDGET_CIN1200T);
static struct pci_device_id pci_tbl[] = {
MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x4f56),
MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x0010),
+ MAKE_EXTENSION_PCI(knc1s, 0x1894, 0x0010),
MAKE_EXTENSION_PCI(knc1sp, 0x1131, 0x0011),
+ MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0014),
+ MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0016),
+ MAKE_EXTENSION_PCI(satewpls, 0x1894, 0x001e),
MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020),
MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021),
MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030),
MAKE_EXTENSION_PCI(knc1tp, 0x1894, 0x0031),
MAKE_EXTENSION_PCI(cin1200s, 0x153b, 0x1154),
+ MAKE_EXTENSION_PCI(cin1200sn, 0x153b, 0x1155),
MAKE_EXTENSION_PCI(cin1200c, 0x153b, 0x1156),
MAKE_EXTENSION_PCI(cin1200t, 0x153b, 0x1157),
{
MODULE_DEVICE_TABLE(pci, pci_tbl);
static struct saa7146_extension budget_extension = {
- .name = "budget dvb /w video in\0",
+ .name = "budget_av",
+ .flags = SAA7146_I2C_SHORT_DELAY,
+
.pci_tbl = pci_tbl,
.module = THIS_MODULE,
git://git.onelab.eu / linux-2.6.git / blobdiff