#define DEBICICAM 0x02420000
-#define SLOTSTATUS_NONE 1
-#define SLOTSTATUS_PRESENT 2
-#define SLOTSTATUS_RESET 4
-#define SLOTSTATUS_READY 8
-#define SLOTSTATUS_OCCUPIED (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY)
-
struct budget_av {
struct budget budget;
struct video_device *vd;
struct tasklet_struct ciintf_irq_tasklet;
int slot_status;
struct dvb_ca_en50221 ca;
- u8 reinitialise_demod:1;
- u8 tda10021_poclkp:1;
- u8 tda10021_ts_enabled;
- int (*tda10021_set_frontend)(struct dvb_frontend *fe, struct dvb_frontend_parameters *p);
};
-static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot);
-
-
-/* GPIO Connections:
- * 0 - Vcc/Reset (Reset is controlled by capacitor). Resets the frontend *AS WELL*!
- * 1 - CI memory select 0=>IO memory, 1=>Attribute Memory
- * 2 - CI Card Enable (Active Low)
- * 3 - CI Card Detect
+/* GPIO CI Connections:
+ * 0 - Vcc/Reset (Reset is controlled by capacitor)
+ * 1 - Attribute Memory
+ * 2 - Card Enable (Active Low)
+ * 3 - Card Detect
*/
/****************************************************************************
udelay(1);
result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 1);
- if (result == -ETIMEDOUT) {
- ciintf_slot_shutdown(ca, slot);
- printk(KERN_INFO "budget-av: cam ejected 1\n");
- }
+
+ if (result == -ETIMEDOUT)
+ budget_av->slot_status = 0;
return result;
}
udelay(1);
result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 1);
- if (result == -ETIMEDOUT) {
- ciintf_slot_shutdown(ca, slot);
- printk(KERN_INFO "budget-av: cam ejected 2\n");
- }
+
+ if (result == -ETIMEDOUT)
+ budget_av->slot_status = 0;
return result;
}
udelay(1);
result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 3, 1, 0, 0);
- if ((result == -ETIMEDOUT) || ((result == 0xff) && ((address & 3) < 2))) {
- ciintf_slot_shutdown(ca, slot);
- printk(KERN_INFO "budget-av: cam ejected 3\n");
- return -ETIMEDOUT;
- }
+
+ if (result == -ETIMEDOUT)
+ budget_av->slot_status = 0;
return result;
}
udelay(1);
result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 3, 1, value, 0, 0);
- if (result == -ETIMEDOUT) {
- ciintf_slot_shutdown(ca, slot);
- printk(KERN_INFO "budget-av: cam ejected 5\n");
- }
+
+ if (result == -ETIMEDOUT)
+ budget_av->slot_status = 0;
return result;
}
{
struct budget_av *budget_av = (struct budget_av *) ca->data;
struct saa7146_dev *saa = budget_av->budget.dev;
+ int timeout = 50; // 5 seconds (4.4.6 Ready)
if (slot != 0)
return -EINVAL;
dprintk(1, "ciintf_slot_reset\n");
- budget_av->slot_status = SLOTSTATUS_RESET;
saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
msleep(20); /* 20 ms Vcc settling time */
saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); /* enable card */
- ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
- msleep(20);
- /* reinitialise the frontend if necessary */
- if (budget_av->reinitialise_demod)
- dvb_frontend_reinitialise(budget_av->budget.dvb_frontend);
+ /* This should have been based on pin 16 READY of the pcmcia port,
+ * but AFAICS it is not routed to the saa7146 */
+ while (--timeout > 0 && ciintf_read_attribute_mem(ca, slot, 0) != 0x1d)
+ msleep(100);
- /* set tda10021 back to original clock configuration on reset */
- if (budget_av->tda10021_poclkp) {
- tda10021_write_byte(budget_av->budget.dvb_frontend, 0x12, 0xa0);
- budget_av->tda10021_ts_enabled = 0;
+ if (timeout <= 0)
+ {
+ printk(KERN_ERR "budget-av: cam reset failed (timeout).\n");
+ saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
+ return -ETIMEDOUT;
}
return 0;
dprintk(1, "ciintf_slot_shutdown\n");
ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
- budget_av->slot_status = SLOTSTATUS_NONE;
-
- /* set tda10021 back to original clock configuration when cam removed */
- if (budget_av->tda10021_poclkp) {
- tda10021_write_byte(budget_av->budget.dvb_frontend, 0x12, 0xa0);
- budget_av->tda10021_ts_enabled = 0;
- }
+ budget_av->slot_status = 0;
return 0;
}
dprintk(1, "ciintf_slot_ts_enable: %d\n", budget_av->slot_status);
ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA);
-
- /* tda10021 seems to need a different TS clock config when data is routed to the CAM */
- if (budget_av->tda10021_poclkp) {
- tda10021_write_byte(budget_av->budget.dvb_frontend, 0x12, 0xa1);
- budget_av->tda10021_ts_enabled = 1;
- }
-
return 0;
}
{
struct budget_av *budget_av = (struct budget_av *) ca->data;
struct saa7146_dev *saa = budget_av->budget.dev;
- int result;
+ int cam_present = 0;
if (slot != 0)
return -EINVAL;
- /* test the card detect line - needs to be done carefully
- * since it never goes high for some CAMs on this interface (e.g. topuptv) */
- if (budget_av->slot_status == SLOTSTATUS_NONE) {
+ if (!budget_av->slot_status)
+ {
+ // first of all test the card detect line
saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
udelay(1);
- if (saa7146_read(saa, PSR) & MASK_06) {
- if (budget_av->slot_status == SLOTSTATUS_NONE) {
- budget_av->slot_status = SLOTSTATUS_PRESENT;
- printk(KERN_INFO "budget-av: cam inserted A\n");
- }
+ if (saa7146_read(saa, PSR) & MASK_06)
+ {
+ cam_present = 1;
}
saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
- }
- /* We also try and read from IO memory to work round the above detection bug. If
- * there is no CAM, we will get a timeout. Only done if there is no cam
- * present, since this test actually breaks some cams :(
- *
- * if the CI interface is not open, we also do the above test since we
- * don't care if the cam has problems - we'll be resetting it on open() anyway */
- if ((budget_av->slot_status == SLOTSTATUS_NONE) || (!open)) {
- saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
- result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1);
- if ((result >= 0) && (budget_av->slot_status == SLOTSTATUS_NONE)) {
- budget_av->slot_status = SLOTSTATUS_PRESENT;
- printk(KERN_INFO "budget-av: cam inserted B\n");
- } else if (result < 0) {
- if (budget_av->slot_status != SLOTSTATUS_NONE) {
- ciintf_slot_shutdown(ca, slot);
- printk(KERN_INFO "budget-av: cam ejected 5\n");
- return 0;
+ // that is unreliable however, so try and read from IO memory
+ if (!cam_present)
+ {
+ saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
+ if (ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1) != -ETIMEDOUT)
+ {
+ cam_present = 1;
}
}
- }
- /* read from attribute memory in reset/ready state to know when the CAM is ready */
- if (budget_av->slot_status == SLOTSTATUS_RESET) {
- result = ciintf_read_attribute_mem(ca, slot, 0);
- if (result == 0x1d) {
- budget_av->slot_status = SLOTSTATUS_READY;
+ // did we find something?
+ if (cam_present) {
+ printk(KERN_INFO "budget-av: cam inserted\n");
+ budget_av->slot_status = 1;
}
- }
-
- /* work out correct return code */
- if (budget_av->slot_status != SLOTSTATUS_NONE) {
- if (budget_av->slot_status & SLOTSTATUS_READY) {
- return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
+ } else if (!open) {
+ saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
+ if (ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1) == -ETIMEDOUT)
+ {
+ printk(KERN_INFO "budget-av: cam ejected\n");
+ saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
+ budget_av->slot_status = 0;
}
- return DVB_CA_EN50221_POLL_CAM_PRESENT;
}
+
+ if (budget_av->slot_status == 1)
+ return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
+
return 0;
}
budget_av->ca.slot_ts_enable = ciintf_slot_ts_enable;
budget_av->ca.poll_slot_status = ciintf_poll_slot_status;
budget_av->ca.data = budget_av;
- budget_av->budget.ci_present = 1;
- budget_av->slot_status = SLOTSTATUS_NONE;
if ((result = dvb_ca_en50221_init(&budget_av->budget.dvb_adapter,
&budget_av->ca, 0, 1)) != 0) {
}
printk(KERN_INFO "budget-av: ci interface initialised.\n");
+ budget_av->budget.ci_present = 1;
return 0;
error:
return 0;
}
-static int philips_su1278_ty_ci_tuner_set_params(struct dvb_frontend *fe,
- struct dvb_frontend_parameters *params)
+static int philips_su1278_ty_ci_pll_set(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct dvb_frontend_parameters *params)
{
u32 div;
u8 buf[4];
- struct budget *budget = (struct budget *) fe->dvb->priv;
struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) };
if ((params->frequency < 950000) || (params->frequency > 2150000))
else if (params->frequency < 2150000)
buf[3] |= 0xC0;
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
+ if (i2c_transfer(i2c, &msg, 1) != 1)
return -EIO;
return 0;
}
#define MIN2(a,b) ((a) < (b) ? (a) : (b))
#define MIN3(a,b,c) MIN2(MIN2(a,b),c)
-static int philips_su1278sh2_tua6100_tuner_set_params(struct dvb_frontend *fe,
- struct dvb_frontend_parameters *params)
+static int philips_su1278sh2_tua6100_pll_set(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct dvb_frontend_parameters *params)
{
u8 reg0 [2] = { 0x00, 0x00 };
u8 reg1 [4] = { 0x01, 0x00, 0x00, 0x00 };
int R, A, N, P, M;
struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = NULL,.len = 0 };
int freq = params->frequency;
- struct budget *budget = (struct budget *) fe->dvb->priv;
first_ZF = (freq) / 1000;
reg0[1] |= 0x03;
/* already enabled - do not reenable i2c repeater or TX fails */
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
msg.buf = reg0;
msg.len = sizeof(reg0);
- if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
+ if (i2c_transfer(i2c, &msg, 1) != 1)
return -EIO;
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
+ stv0299_enable_plli2c(fe);
msg.buf = reg1;
msg.len = sizeof(reg1);
- if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
+ if (i2c_transfer(i2c, &msg, 1) != 1)
return -EIO;
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
+ stv0299_enable_plli2c(fe);
msg.buf = reg2;
msg.len = sizeof(reg2);
- if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
+ if (i2c_transfer(i2c, &msg, 1) != 1)
return -EIO;
return 0;
.volt13_op0_op1 = STV0299_VOLT13_OP0,
.min_delay_ms = 100,
.set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
+ .pll_set = philips_su1278_ty_ci_pll_set,
};
.volt13_op0_op1 = STV0299_VOLT13_OP0,
.min_delay_ms = 100,
.set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
+ .pll_set = philips_su1278_ty_ci_pll_set,
};
static struct stv0299_config cinergy_1200s_1894_0010_config = {
.volt13_op0_op1 = STV0299_VOLT13_OP0,
.min_delay_ms = 100,
.set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
+ .pll_set = philips_su1278sh2_tua6100_pll_set,
};
-static int philips_cu1216_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+static int philips_cu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
{
struct budget *budget = (struct budget *) fe->dvb->priv;
u8 buf[4];
buf[3] = (params->frequency < 150000000 ? 0x01 :
params->frequency < 445000000 ? 0x02 : 0x04);
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
return -EIO;
return 0;
static struct tda10021_config philips_cu1216_config = {
.demod_address = 0x0c,
+ .pll_set = philips_cu1216_pll_set,
};
-static int philips_tu1216_tuner_init(struct dvb_frontend *fe)
+static int philips_tu1216_pll_init(struct dvb_frontend *fe)
{
struct budget *budget = (struct budget *) fe->dvb->priv;
static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab };
struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) };
// setup PLL configuration
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
return -EIO;
msleep(1);
return 0;
}
-static int philips_tu1216_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+static int philips_tu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
{
struct budget *budget = (struct budget *) fe->dvb->priv;
u8 tuner_buf[4];
tuner_buf[2] = 0xca;
tuner_buf[3] = (cp << 5) | (filter << 3) | band;
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
return -EIO;
.xtal_freq = TDA10046_XTAL_4M,
.agc_config = TDA10046_AGC_DEFAULT,
.if_freq = TDA10046_FREQ_3617,
+ .pll_init = philips_tu1216_pll_init,
+ .pll_set = philips_tu1216_pll_set,
+ .pll_sleep = NULL,
.request_firmware = philips_tu1216_request_firmware,
};
0xff, 0xff
};
-static int philips_sd1878_tda8261_tuner_set_params(struct dvb_frontend *fe,
- struct dvb_frontend_parameters *params)
+static int philips_sd1878_tda8261_pll_set(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct dvb_frontend_parameters *params)
{
u8 buf[4];
int rc;
struct i2c_msg tuner_msg = {.addr=0x60,.flags=0,.buf=buf,.len=sizeof(buf)};
- struct budget *budget = (struct budget *) fe->dvb->priv;
if((params->frequency < 950000) || (params->frequency > 2150000))
return -EINVAL;
params->frequency, 0);
if(rc < 0) return rc;
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- if(i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
+ if(i2c_transfer(i2c, &tuner_msg, 1) != 1)
return -EIO;
return 0;
static struct stv0299_config philips_sd1878_config = {
.demod_address = 0x68,
- .inittab = philips_sd1878_inittab,
+ .inittab = philips_sd1878_inittab,
.mclk = 88000000UL,
.invert = 0,
.skip_reinit = 0,
.volt13_op0_op1 = STV0299_VOLT13_OP0,
.min_delay_ms = 100,
.set_symbol_rate = philips_sd1878_ci_set_symbol_rate,
+ .pll_set = philips_sd1878_tda8261_pll_set,
};
static u8 read_pwm(struct budget_av *budget_av)
#define SUBID_DVBS_TV_STAR 0x0014
#define SUBID_DVBS_TV_STAR_CI 0x0016
-#define SUBID_DVBS_EASYWATCH_1 0x001a
-#define SUBID_DVBS_EASYWATCH 0x001e
#define SUBID_DVBC_KNC1 0x0020
#define SUBID_DVBC_KNC1_PLUS 0x0021
#define SUBID_DVBC_CINERGY1200 0x1156
#define SUBID_DVBT_KNC1 0x0030
#define SUBID_DVBT_CINERGY1200 0x1157
-
-static int tda10021_set_frontend(struct dvb_frontend *fe,
- struct dvb_frontend_parameters *p)
-{
- struct budget_av* budget_av = fe->dvb->priv;
- int result;
-
- result = budget_av->tda10021_set_frontend(fe, p);
- if (budget_av->tda10021_ts_enabled) {
- tda10021_write_byte(budget_av->budget.dvb_frontend, 0x12, 0xa1);
- } else {
- tda10021_write_byte(budget_av->budget.dvb_frontend, 0x12, 0xa0);
- }
-
- return result;
-}
-
static void frontend_init(struct budget_av *budget_av)
{
struct saa7146_dev * saa = budget_av->budget.dev;
/* Enable / PowerON Frontend */
saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
- /* additional setup necessary for the PLUS cards */
switch (saa->pci->subsystem_device) {
case SUBID_DVBS_KNC1_PLUS:
case SUBID_DVBC_KNC1_PLUS:
switch (saa->pci->subsystem_device) {
case SUBID_DVBS_KNC1:
- case SUBID_DVBS_EASYWATCH_1:
if (saa->pci->subsystem_vendor == 0x1894) {
fe = stv0299_attach(&cinergy_1200s_1894_0010_config,
&budget_av->budget.i2c_adap);
- if (fe) {
- fe->ops.tuner_ops.set_params = philips_su1278sh2_tua6100_tuner_set_params;
- }
} else {
fe = stv0299_attach(&typhoon_config,
&budget_av->budget.i2c_adap);
- if (fe) {
- fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
- }
}
break;
case SUBID_DVBS_TV_STAR:
case SUBID_DVBS_TV_STAR_CI:
case SUBID_DVBS_CYNERGY1200N:
- case SUBID_DVBS_EASYWATCH:
fe = stv0299_attach(&philips_sd1878_config,
&budget_av->budget.i2c_adap);
- if (fe) {
- fe->ops.tuner_ops.set_params = philips_sd1878_tda8261_tuner_set_params;
- }
break;
case SUBID_DVBS_KNC1_PLUS:
case SUBID_DVBS_TYPHOON:
fe = stv0299_attach(&typhoon_config,
&budget_av->budget.i2c_adap);
- if (fe) {
- fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
- }
break;
case SUBID_DVBS_CINERGY1200:
fe = stv0299_attach(&cinergy_1200s_config,
&budget_av->budget.i2c_adap);
- if (fe) {
- fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
- }
break;
case SUBID_DVBC_KNC1:
- budget_av->reinitialise_demod = 1;
+ case SUBID_DVBC_KNC1_PLUS:
fe = tda10021_attach(&philips_cu1216_config,
&budget_av->budget.i2c_adap,
read_pwm(budget_av));
- if (fe) {
- fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params;
- }
break;
- case SUBID_DVBC_KNC1_PLUS:
+ case SUBID_DVBT_KNC1:
+ case SUBID_DVBT_KNC1_PLUS:
+ fe = tda10046_attach(&philips_tu1216_config,
+ &budget_av->budget.i2c_adap);
+ break;
+
case SUBID_DVBC_CINERGY1200:
- budget_av->reinitialise_demod = 1;
fe = tda10021_attach(&philips_cu1216_config,
&budget_av->budget.i2c_adap,
read_pwm(budget_av));
- if (fe) {
- budget_av->tda10021_poclkp = 1;
- budget_av->tda10021_set_frontend = fe->ops.set_frontend;
- fe->ops.set_frontend = tda10021_set_frontend;
- fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params;
- }
break;
- case SUBID_DVBT_KNC1:
- case SUBID_DVBT_KNC1_PLUS:
case SUBID_DVBT_CINERGY1200:
- budget_av->reinitialise_demod = 1;
fe = tda10046_attach(&philips_tu1216_config,
&budget_av->budget.i2c_adap);
- if (fe) {
- fe->ops.tuner_ops.init = philips_tu1216_tuner_init;
- fe->ops.tuner_ops.set_params = philips_tu1216_tuner_set_params;
- }
break;
}
if (dvb_register_frontend(&budget_av->budget.dvb_adapter,
budget_av->budget.dvb_frontend)) {
printk(KERN_ERR "budget-av: Frontend registration failed!\n");
- if (budget_av->budget.dvb_frontend->ops.release)
- budget_av->budget.dvb_frontend->ops.release(budget_av->budget.dvb_frontend);
+ if (budget_av->budget.dvb_frontend->ops->release)
+ budget_av->budget.dvb_frontend->ops->release(budget_av->budget.dvb_frontend);
budget_av->budget.dvb_frontend = NULL;
}
}
SAA7146_HPS_SYNC_PORT_A);
saa7113_setinput(budget_av, 0);
+ } else {
+ ciintf_init(budget_av);
}
/* fixme: find some sane values here... */
budget_av->budget.dvb_adapter.priv = budget_av;
frontend_init(budget_av);
- ciintf_init(budget_av);
-
- ttpci_budget_init_hooks(&budget_av->budget);
return 0;
}
MAKE_BUDGET_INFO(knc1c, "KNC1 DVB-C", BUDGET_KNC1C);
MAKE_BUDGET_INFO(knc1t, "KNC1 DVB-T", BUDGET_KNC1T);
MAKE_BUDGET_INFO(kncxs, "KNC TV STAR DVB-S", BUDGET_TVSTAR);
-MAKE_BUDGET_INFO(satewpls, "Satelco EasyWatch DVB-S light", BUDGET_TVSTAR);
-MAKE_BUDGET_INFO(satewpls1, "Satelco EasyWatch DVB-S light", BUDGET_KNC1S);
MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP);
MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP);
MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP);
MAKE_EXTENSION_PCI(knc1sp, 0x1131, 0x0011),
MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0014),
MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0016),
- MAKE_EXTENSION_PCI(satewpls, 0x1894, 0x001e),
- MAKE_EXTENSION_PCI(satewpls1, 0x1894, 0x001a),
MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020),
MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021),
MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030),
git://git.onelab.eu / linux-2.6.git / blobdiff