*/
#include "budget.h"
-#include "dvb_functions.h"
+#include "stv0299.h"
+#include "ves1x93.h"
+#include "ves1820.h"
+#include "l64781.h"
+#include "tda8083.h"
static void Set22K (struct budget *budget, int state)
{
struct saa7146_dev *dev=budget->dev;
- DEB_EE(("budget: %p\n",budget));
+ dprintk(2, "budget: %p\n", budget);
saa7146_setgpio(dev, 3, (state ? SAA7146_GPIO_OUTHI : SAA7146_GPIO_OUTLO));
}
static void DiseqcSendBit (struct budget *budget, int data)
{
struct saa7146_dev *dev=budget->dev;
- DEB_EE(("budget: %p\n",budget));
+ dprintk(2, "budget: %p\n", budget);
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
udelay(data ? 500 : 1000);
{
int i, par=1, d;
- DEB_EE(("budget: %p\n",budget));
+ dprintk(2, "budget: %p\n", budget);
for (i=7; i>=0; i--) {
d = (data>>i)&1;
struct saa7146_dev *dev=budget->dev;
int i;
- DEB_EE(("budget: %p\n",budget));
+ dprintk(2, "budget: %p\n", budget);
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
mdelay(16);
udelay(12500);
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
}
- dvb_delay(20);
+ msleep(20);
}
return 0;
}
+/*
+ * Routines for the Fujitsu Siemens Activy budget card
+ * 22 kHz tone and DiSEqC are handled by the frontend.
+ * Voltage must be set here.
+ */
+static int SetVoltage_Activy (struct budget *budget, fe_sec_voltage_t voltage)
+{
+ struct saa7146_dev *dev=budget->dev;
+
+ dprintk(2, "budget: %p\n", budget);
+
+ switch (voltage) {
+ case SEC_VOLTAGE_13:
+ saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTLO);
+ break;
+ case SEC_VOLTAGE_18:
+ saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
-int budget_diseqc_ioctl (struct dvb_frontend *fe, unsigned int cmd, void *arg)
+static int siemens_budget_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
{
- struct budget *budget = fe->before_after_data;
+ struct budget* budget = (struct budget*) fe->dvb->priv;
- DEB_EE(("budget: %p\n",budget));
+ return SetVoltage_Activy (budget, voltage);
+}
- switch (cmd) {
- case FE_SET_TONE:
- switch ((fe_sec_tone_mode_t) arg) {
+static int budget_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
+{
+ struct budget* budget = (struct budget*) fe->dvb->priv;
+
+ switch (tone) {
case SEC_TONE_ON:
Set22K (budget, 1);
break;
case SEC_TONE_OFF:
Set22K (budget, 0);
break;
+
default:
return -EINVAL;
- };
- break;
+ }
- case FE_DISEQC_SEND_MASTER_CMD:
+ return 0;
+}
+
+static int budget_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
{
- struct dvb_diseqc_master_cmd *cmd = arg;
+ struct budget* budget = (struct budget*) fe->dvb->priv;
SendDiSEqCMsg (budget, cmd->msg_len, cmd->msg, 0);
- break;
+
+ return 0;
}
- case FE_DISEQC_SEND_BURST:
- SendDiSEqCMsg (budget, 0, NULL, (unsigned long)arg);
- break;
+static int budget_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
+{
+ struct budget* budget = (struct budget*) fe->dvb->priv;
- default:
- return -EOPNOTSUPP;
- };
+ SendDiSEqCMsg (budget, 0, NULL, minicmd);
return 0;
}
+static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+ struct budget* budget = (struct budget*) fe->dvb->priv;
+ u8 pwr = 0;
+ u8 buf[4];
+ struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
+ u32 div = (params->frequency + 479500) / 125;
+
+ if (params->frequency > 2000000) pwr = 3;
+ else if (params->frequency > 1800000) pwr = 2;
+ else if (params->frequency > 1600000) pwr = 1;
+ else if (params->frequency > 1200000) pwr = 0;
+ else if (params->frequency >= 1100000) pwr = 1;
+ else pwr = 2;
+
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = div & 0xff;
+ buf[2] = ((div & 0x18000) >> 10) | 0x95;
+ buf[3] = (pwr << 6) | 0x30;
+
+ // NOTE: since we're using a prescaler of 2, we set the
+ // divisor frequency to 62.5kHz and divide by 125 above
+
+ if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
+ return 0;
+}
-/*
- * Routines for the Fujitsu Siemens Activy budget card
- * 22 kHz tone and DiSEqC are handled by the frontend.
- * Voltage must be set here.
- */
-static int SetVoltage_Activy (struct budget *budget, fe_sec_voltage_t voltage)
+static struct ves1x93_config alps_bsrv2_config =
{
- struct saa7146_dev *dev=budget->dev;
+ .demod_address = 0x08,
+ .xin = 90100000UL,
+ .invert_pwm = 0,
+ .pll_set = alps_bsrv2_pll_set,
+};
- DEB_EE(("budget: %p\n",budget));
+static u8 alps_bsru6_inittab[] = {
+ 0x01, 0x15,
+ 0x02, 0x00,
+ 0x03, 0x00,
+ 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+ 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
+ 0x06, 0x40, /* DAC not used, set to high impendance mode */
+ 0x07, 0x00, /* DAC LSB */
+ 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */
+ 0x09, 0x00, /* FIFO */
+ 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
+ 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */
+ 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
+ 0x10, 0x3f, // AGC2 0x3d
+ 0x11, 0x84,
+ 0x12, 0xb5, // Lock detect: -64 Carrier freq detect:on
+ 0x15, 0xc9, // lock detector threshold
+ 0x16, 0x00,
+ 0x17, 0x00,
+ 0x18, 0x00,
+ 0x19, 0x00,
+ 0x1a, 0x00,
+ 0x1f, 0x50,
+ 0x20, 0x00,
+ 0x21, 0x00,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
+ 0x29, 0x1e, // 1/2 threshold
+ 0x2a, 0x14, // 2/3 threshold
+ 0x2b, 0x0f, // 3/4 threshold
+ 0x2c, 0x09, // 5/6 threshold
+ 0x2d, 0x05, // 7/8 threshold
+ 0x2e, 0x01,
+ 0x31, 0x1f, // test all FECs
+ 0x32, 0x19, // viterbi and synchro search
+ 0x33, 0xfc, // rs control
+ 0x34, 0x93, // error control
+ 0x0f, 0x52,
+ 0xff, 0xff
+};
- switch (voltage) {
- case SEC_VOLTAGE_13:
- saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTLO);
- break;
- case SEC_VOLTAGE_18:
- saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI);
- break;
- default:
- return -EINVAL;
+static int alps_bsru6_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
+{
+ u8 aclk = 0;
+ u8 bclk = 0;
+
+ if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
+ else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
+ else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
+ else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
+ else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
+ else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
+
+ stv0299_writereg (fe, 0x13, aclk);
+ stv0299_writereg (fe, 0x14, bclk);
+ stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff);
+ stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff);
+ stv0299_writereg (fe, 0x21, (ratio ) & 0xf0);
+
+ return 0;
}
+static int alps_bsru6_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+ struct budget* budget = (struct budget*) fe->dvb->priv;
+ u8 data[4];
+ u32 div;
+ struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
+
+ if ((params->frequency < 950000) || (params->frequency > 2150000)) return -EINVAL;
+
+ div = (params->frequency + (125 - 1)) / 125; // round correctly
+ data[0] = (div >> 8) & 0x7f;
+ data[1] = div & 0xff;
+ data[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
+ data[3] = 0xC4;
+
+ if (params->frequency > 1530000) data[3] = 0xc0;
+
+ if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
return 0;
}
+static struct stv0299_config alps_bsru6_config = {
+
+ .demod_address = 0x68,
+ .inittab = alps_bsru6_inittab,
+ .mclk = 88000000UL,
+ .invert = 1,
+ .enhanced_tuning = 0,
+ .skip_reinit = 0,
+ .lock_output = STV0229_LOCKOUTPUT_1,
+ .volt13_op0_op1 = STV0299_VOLT13_OP1,
+ .min_delay_ms = 100,
+ .set_symbol_rate = alps_bsru6_set_symbol_rate,
+ .pll_set = alps_bsru6_pll_set,
+};
-static int budget_ioctl_activy (struct dvb_frontend *fe, unsigned int cmd, void *arg)
+static int alps_tdbe2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
- struct budget *budget = fe->before_after_data;
+ struct budget* budget = (struct budget*) fe->dvb->priv;
+ u32 div;
+ u8 data[4];
+ struct i2c_msg msg = { .addr = 0x62, .flags = 0, .buf = data, .len = sizeof(data) };
- DEB_EE(("budget: %p\n",budget));
+ div = (params->frequency + 35937500 + 31250) / 62500;
- switch (cmd) {
- case FE_SET_VOLTAGE:
- return SetVoltage_Activy (budget, (fe_sec_voltage_t) arg);
- default:
- return -EOPNOTSUPP;
+ data[0] = (div >> 8) & 0x7f;
+ data[1] = div & 0xff;
+ data[2] = 0x85 | ((div >> 10) & 0x60);
+ data[3] = (params->frequency < 174000000 ? 0x88 : params->frequency < 470000000 ? 0x84 : 0x81);
+
+ if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
+ return 0;
+}
+
+static struct ves1820_config alps_tdbe2_config = {
+ .demod_address = 0x09,
+ .xin = 57840000UL,
+ .invert = 1,
+ .selagc = VES1820_SELAGC_SIGNAMPERR,
+ .pll_set = alps_tdbe2_pll_set,
+};
+
+static int grundig_29504_401_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+ struct budget* budget = (struct budget*) fe->dvb->priv;
+ u32 div;
+ u8 cfg, cpump, band_select;
+ u8 data[4];
+ struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
+
+ div = (36125000 + params->frequency) / 166666;
+
+ cfg = 0x88;
+
+ if (params->frequency < 175000000) cpump = 2;
+ else if (params->frequency < 390000000) cpump = 1;
+ else if (params->frequency < 470000000) cpump = 2;
+ else if (params->frequency < 750000000) cpump = 1;
+ else cpump = 3;
+
+ if (params->frequency < 175000000) band_select = 0x0e;
+ else if (params->frequency < 470000000) band_select = 0x05;
+ else band_select = 0x03;
+
+ data[0] = (div >> 8) & 0x7f;
+ data[1] = div & 0xff;
+ data[2] = ((div >> 10) & 0x60) | cfg;
+ data[3] = (cpump << 6) | band_select;
+
+ if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
+ return 0;
}
+static struct l64781_config grundig_29504_401_config = {
+ .demod_address = 0x55,
+ .pll_set = grundig_29504_401_pll_set,
+};
+
+static int grundig_29504_451_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+ struct budget* budget = (struct budget*) fe->dvb->priv;
+ u32 div;
+ u8 data[4];
+ struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
+
+ div = params->frequency / 125;
+ data[0] = (div >> 8) & 0x7f;
+ data[1] = div & 0xff;
+ data[2] = 0x8e;
+ data[3] = 0x00;
+
+ if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
return 0;
}
+static struct tda8083_config grundig_29504_451_config = {
+ .demod_address = 0x68,
+ .pll_set = grundig_29504_451_pll_set,
+};
+
+static u8 read_pwm(struct budget* budget)
+{
+ u8 b = 0xff;
+ u8 pwm;
+ struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 },
+ { .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} };
+
+ if ((i2c_transfer(&budget->i2c_adap, msg, 2) != 2) || (pwm == 0xff))
+ pwm = 0x48;
+
+ return pwm;
+}
+
+static void frontend_init(struct budget *budget)
+{
+ switch(budget->dev->pci->subsystem_device) {
+ case 0x1003: // Hauppauge/TT Nova budget (stv0299/ALPS BSRU6(tsa5059) OR ves1893/ALPS BSRV2(sp5659))
+ case 0x1013:
+ // try the ALPS BSRV2 first of all
+ budget->dvb_frontend = ves1x93_attach(&alps_bsrv2_config, &budget->i2c_adap);
+ if (budget->dvb_frontend) {
+ budget->dvb_frontend->ops->diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
+ budget->dvb_frontend->ops->diseqc_send_burst = budget_diseqc_send_burst;
+ budget->dvb_frontend->ops->set_tone = budget_set_tone;
+ break;
+ }
+
+ // try the ALPS BSRU6 now
+ budget->dvb_frontend = stv0299_attach(&alps_bsru6_config, &budget->i2c_adap);
+ if (budget->dvb_frontend) {
+ budget->dvb_frontend->ops->diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
+ budget->dvb_frontend->ops->diseqc_send_burst = budget_diseqc_send_burst;
+ budget->dvb_frontend->ops->set_tone = budget_set_tone;
+ break;
+ }
+ break;
+
+ case 0x1004: // Hauppauge/TT DVB-C budget (ves1820/ALPS TDBE2(sp5659))
+
+ budget->dvb_frontend = ves1820_attach(&alps_tdbe2_config, &budget->i2c_adap, read_pwm(budget));
+ if (budget->dvb_frontend) break;
+ break;
+
+ case 0x1005: // Hauppauge/TT Nova-T budget (L64781/Grundig 29504-401(tsa5060))
+
+ budget->dvb_frontend = l64781_attach(&grundig_29504_401_config, &budget->i2c_adap);
+ if (budget->dvb_frontend) break;
+ break;
+
+ case 0x4f61: // Fujitsu Siemens Activy Budget-S PCI (tda8083/Grundig 29504-451(tsa5522))
+
+ // grundig 29504-451
+ budget->dvb_frontend = tda8083_attach(&grundig_29504_451_config, &budget->i2c_adap);
+ if (budget->dvb_frontend) {
+ budget->dvb_frontend->ops->set_voltage = siemens_budget_set_voltage;
+ break;
+ }
+ break;
+ }
+
+ if (budget->dvb_frontend == NULL) {
+ printk("budget: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n",
+ budget->dev->pci->vendor,
+ budget->dev->pci->device,
+ budget->dev->pci->subsystem_vendor,
+ budget->dev->pci->subsystem_device);
+ } else {
+ if (dvb_register_frontend(budget->dvb_adapter, budget->dvb_frontend)) {
+ printk("budget: Frontend registration failed!\n");
+ if (budget->dvb_frontend->ops->release)
+ budget->dvb_frontend->ops->release(budget->dvb_frontend);
+ budget->dvb_frontend = NULL;
+ }
+ }
+}
static int budget_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info)
{
return -ENOMEM;
}
- DEB_EE(("dev:%p, info:%p, budget:%p\n",dev,info,budget));
+ dprintk(2, "dev:%p, info:%p, budget:%p\n", dev, info, budget);
- if ((err = ttpci_budget_init (budget, dev, info))) {
+ dev->ext_priv = budget;
+
+ if ((err = ttpci_budget_init (budget, dev, info, THIS_MODULE))) {
printk("==> failed\n");
kfree (budget);
return err;
}
- if (budget->card->type == BUDGET_FS_ACTIVY)
- dvb_add_frontend_ioctls (budget->dvb_adapter,
- budget_ioctl_activy, NULL, budget);
- else
- dvb_add_frontend_ioctls (budget->dvb_adapter,
- budget_diseqc_ioctl, NULL, budget);
-
- dev->ext_priv = budget;
+ budget->dvb_adapter->priv = budget;
+ frontend_init(budget);
return 0;
}
struct budget *budget = (struct budget*) dev->ext_priv;
int err;
- if (budget->card->type == BUDGET_FS_ACTIVY)
- dvb_remove_frontend_ioctls (budget->dvb_adapter,
- budget_ioctl_activy, NULL);
- else
- dvb_remove_frontend_ioctls (budget->dvb_adapter,
- budget_diseqc_ioctl, NULL);
+ if (budget->dvb_frontend) dvb_unregister_frontend(budget->dvb_frontend);
err = ttpci_budget_deinit (budget);
MAKE_BUDGET_INFO(ttbt, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT);
MAKE_BUDGET_INFO(satel, "SATELCO Multimedia PCI", BUDGET_TT_HW_DISEQC);
MAKE_BUDGET_INFO(fsacs, "Fujitsu Siemens Activy Budget-S PCI", BUDGET_FS_ACTIVY);
-/* Uncomment for Budget Patch */
-/*MAKE_BUDGET_INFO(fs_1_3,"Siemens/Technotrend/Hauppauge PCI rev1.3+Budget_Patch", BUDGET_PATCH);*/
static struct pci_device_id pci_tbl[] = {
- /* Uncomment for Budget Patch */
- /*MAKE_EXTENSION_PCI(fs_1_3,0x13c2, 0x0000),*/
MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1003),
MAKE_EXTENSION_PCI(ttbc, 0x13c2, 0x1004),
MAKE_EXTENSION_PCI(ttbt, 0x13c2, 0x1005),
static void __exit budget_exit(void)
{
- DEB_EE((".\n"));
saa7146_unregister_extension(&budget_extension);
}
git://git.onelab.eu / linux-2.6.git / blobdiff