Does any other model using the w9966 interface chip exist ?
Todo:
-
+
*Add a working EPP mode, since DMA ECP read isn't implemented
in the parport drivers. (That's why it's so sloow)
*Probably some bugs that I don't know of
Please support me by sending feedback!
-
+
Changes:
-
+
Alan Cox: Removed RGB mode for kernel merge, added THIS_MODULE
and owner support for newer module locks
*/
.open = video_exclusive_open,
.release = video_exclusive_release,
.ioctl = w9966_v4l_ioctl,
+ .compat_ioctl = v4l_compat_ioctl32,
.read = w9966_v4l_read,
.llseek = no_llseek,
};
*/
-// Set camera phase flags, so we know what to uninit when terminating
+// Set camera phase flags, so we know what to uninit when terminating
static inline void w9966_setState(struct w9966_dev* cam, int mask, int val)
{
cam->dev_state = (cam->dev_state & ~mask) ^ val;
parport_release(cam->pdev);
w9966_setState(cam, W9966_STATE_CLAIMED, 0);
}
-
+
// Read register from W9966 interface-chip
// Expects a claimed pdev
// -1 on error, else register data (byte)
// ECP, read, regtransfer, REG, REG, REG, REG, REG
const unsigned char addr = 0x80 | (reg & 0x1f);
unsigned char val;
-
+
if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_ADDR) != 0)
return -1;
if (parport_write(cam->pport, &addr, 1) != 1)
// ECP, write, regtransfer, REG, REG, REG, REG, REG
const unsigned char addr = 0xc0 | (reg & 0x1f);
const unsigned char val = data;
-
+
if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_ADDR) != 0)
return -1;
if (parport_write(cam->pport, &addr, 1) != 1)
{
if (cam->dev_state != 0)
return -1;
-
+
cam->pport = port;
cam->brightness = 128;
cam->contrast = 64;
cam->ppmode = IEEE1284_MODE_EPP;
else
cam->ppmode = IEEE1284_MODE_ECP;
- break;
+ break;
case 1: // hw- or sw-ecp
cam->ppmode = IEEE1284_MODE_ECP;
break;
cam->ppmode = IEEE1284_MODE_EPP;
break;
}
-
+
// Tell the parport driver that we exists
cam->pdev = parport_register_device(port, "w9966", NULL, NULL, NULL, 0, NULL);
if (cam->pdev == NULL) {
w9966_setState(cam, W9966_STATE_PDEV, W9966_STATE_PDEV);
w9966_pdev_claim(cam);
-
+
// Setup a default capture mode
if (w9966_setup(cam, 0, 0, 1023, 1023, 200, 160) != 0) {
DPRINTF("w9966_setup() failed.\n");
memcpy(&cam->vdev, &w9966_template, sizeof(struct video_device));
cam->vdev.priv = cam;
- if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, video_nr) == -1)
+ if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, video_nr) == -1)
return -1;
-
+
w9966_setState(cam, W9966_STATE_VDEV, W9966_STATE_VDEV);
-
+
// All ok
printk(
"w9966cf: Found and initialized a webcam on %s.\n",
// Only continue as long as we keep getting better values
if (err > besterr)
break;
-
+
besterr = err;
bestlen = len;
}
return bestlen;
}
-// Modify capture window (if necessary)
+// Modify capture window (if necessary)
// and calculate downscaling
// Return -1 on error
static int w9966_calcscale(int size, int min, int max, int* beg, int* end, unsigned char* factor)
int maxlen = max - min;
int len = *end - *beg + 1;
int newlen = w9966_findlen(len, size, maxlen);
- int err = newlen - len;
+ int err = newlen - len;
// Check for bad format
if (newlen > maxlen || newlen < size)
0x48, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x71, 0xe7, 0x00, 0x00, 0xc0
};
-
-
+
+
if (w*h*2 > W9966_SRAMSIZE)
{
DPRINTF("capture window exceeds SRAM size!.\n");
cam->width = w;
cam->height = h;
- enh_s = 0;
+ enh_s = 0;
enh_e = w*h*2;
-
+
// Modify capture window if necessary and calculate downscaling
if (
w9966_calcscale(w, W9966_WND_MIN_X, W9966_WND_MAX_X, &x1, &x2, &scale_x) != 0 ||
"%dx%d, x: %d<->%d, y: %d<->%d, sx: %d/64, sy: %d/64.\n",
w, h, x1, x2, y1, y2, scale_x&~0x80, scale_y&~0x80
);
-
+
// Setup registers
regs[0x00] = 0x00; // Set normal operation
regs[0x01] = 0x18; // Capture mode
regs[0x02] = scale_y; // V-scaling
regs[0x03] = scale_x; // H-scaling
-
- // Capture window
+
+ // Capture window
regs[0x04] = (x1 & 0x0ff); // X-start (8 low bits)
regs[0x05] = (x1 & 0x300)>>8; // X-start (2 high bits)
regs[0x06] = (y1 & 0x0ff); // Y-start (8 low bits)
regs[0x0a] = (y2 & 0x0ff); // Y-end (8 low bits)
regs[0x0c] = W9966_SRAMID; // SRAM-banks (1x 128kb)
-
+
// Enhancement layer
regs[0x0d] = (enh_s& 0x000ff); // Enh. start (0-7)
regs[0x0e] = (enh_s& 0x0ff00)>>8; // Enh. start (8-15)
regs[0x19] = 0xff; // I/O port direction control
regs[0x1a] = 0xff; // I/O port data register
regs[0x1b] = 0x10; // ???
-
+
// SAA7111 chip settings
saa7111_regs[0x0a] = cam->brightness;
saa7111_regs[0x0b] = cam->contrast;
cam->i2c_state |= W9966_I2C_W_DATA;
else
cam->i2c_state &= ~W9966_I2C_W_DATA;
-
+
w9966_wReg(cam, 0x18, cam->i2c_state);
udelay(5);
}
w9966_wReg(cam, 0x18, cam->i2c_state);
udelay(5);
-
+
// we go to high, we also expect the peripheral to ack.
if (state) {
timeout = jiffies + 100;
w9966_i2c_setsda(cam, (data >> i) & 0x01);
if (w9966_i2c_setscl(cam, 1) == -1)
- return -1;
+ return -1;
w9966_i2c_setscl(cam, 0);
}
w9966_i2c_setsda(cam, 1);
-
+
if (w9966_i2c_setscl(cam, 1) == -1)
return -1;
w9966_i2c_setscl(cam, 0);
-
+
return 0;
}
static int w9966_i2c_rbyte(struct w9966_dev* cam)
{
unsigned char data = 0x00;
- int i;
-
+ int i;
+
w9966_i2c_setsda(cam, 1);
for (i = 0; i < 8; i++)
data = data << 1;
if (w9966_i2c_getsda(cam))
data |= 0x01;
-
+
w9966_i2c_setscl(cam, 0);
}
return data;
return -1;
w9966_i2c_setsda(cam, 0);
-
+
if (w9966_i2c_setscl(cam, 1) == -1)
return -1;
w9966_i2c_setsda(cam, 1);
-
+
return data;
}
#endif
w9966_i2c_setsda(cam, 0);
if (w9966_i2c_setscl(cam, 1) == -1)
return -1;
-
+
w9966_i2c_setsda(cam, 1);
return 0;
{
struct video_device *vdev = video_devdata(file);
struct w9966_dev *cam = vdev->priv;
-
+
switch(cmd)
{
case VIDIOCGCAP:
struct video_picture *vpic = arg;
if (vpic->depth != 16 || vpic->palette != VIDEO_PALETTE_YUV422)
return -EINVAL;
-
+
cam->brightness = vpic->brightness >> 8;
cam->hue = (vpic->hue >> 8) - 128;
cam->color = vpic->colour >> 9;
cam->contrast = vpic->contrast >> 9;
w9966_pdev_claim(cam);
-
+
if (
w9966_wReg_i2c(cam, 0x0a, cam->brightness) == -1 ||
w9966_wReg_i2c(cam, 0x0b, cam->contrast) == -1 ||
w9966_pdev_release(cam);
return -EIO;
}
-
+
w9966_pdev_release(cam);
return 0;
}
{
int ret;
struct video_window *vwin = arg;
-
+
if (vwin->flags != 0)
return -EINVAL;
if (vwin->clipcount != 0)
return -EINVAL;
if (vwin->width < 2 || vwin->width > W9966_WND_MAX_W)
- return -EINVAL;
+ return -EINVAL;
if (vwin->height < 1 || vwin->height > W9966_WND_MAX_H)
return -EINVAL;
w9966_pdev_claim(cam);
ret = w9966_setup(cam, 0, 0, 1023, 1023, vwin->width, vwin->height);
w9966_pdev_release(cam);
-
+
if (ret != 0) {
DPRINTF("VIDIOCSWIN: w9966_setup() failed.\n");
return -EIO;
}
-
+
return 0;
}
case VIDIOCGWIN:
return 0;
}
// Unimplemented
- case VIDIOCCAPTURE:
+ case VIDIOCCAPTURE:
case VIDIOCGFBUF:
case VIDIOCSFBUF:
case VIDIOCKEY:
unsigned char __user *dest = (unsigned char __user *)buf;
unsigned long dleft = count;
unsigned char *tbuf;
-
+
// Why would anyone want more than this??
if (count > cam->width * cam->height * 2)
return -EINVAL;
-
+
w9966_pdev_claim(cam);
w9966_wReg(cam, 0x00, 0x02); // Reset ECP-FIFO buffer
w9966_wReg(cam, 0x00, 0x00); // Return to normal operation
w9966_wReg(cam, 0x01, 0x98); // Enable capture
- // write special capture-addr and negotiate into data transfer
+ // write special capture-addr and negotiate into data transfer
if (
(parport_negotiate(cam->pport, cam->ppmode|IEEE1284_ADDR) != 0 )||
(parport_write(cam->pport, &addr, 1) != 1 )||
while(dleft > 0)
{
unsigned long tsize = (dleft > W9966_RBUFFER) ? W9966_RBUFFER : dleft;
-
+
if (parport_read(cam->pport, tbuf, tsize) < tsize) {
count = -EFAULT;
goto out;
static void w9966_attach(struct parport *port)
{
int i;
-
+
for (i = 0; i < W9966_MAXCAMS; i++)
{
if (w9966_cams[i].dev_state != 0) // Cam is already assigned
git://git.onelab.eu / linux-2.6.git / blobdiff