/*
- * Copyright (c) 2003 LSI Logic Corporation.
+ * Copyright (c) 2004 LSI Logic Corporation.
*
*
* Name: mpi_sas.h
* Title: MPI Serial Attached SCSI structures and definitions
- * Creation Date: April 23, 2003
+ * Creation Date: August 19, 2004
*
- * mpi_sas.h Version: 01.05.xx
+ * mpi_sas.h Version: 01.05.02
*
* Version History
* ---------------
*
* Date Version Description
* -------- -------- ------------------------------------------------------
- * xx-yy-zz 01.05.01 Original release.
+ * 08-19-04 01.05.01 Original release.
+ * 08-30-05 01.05.02 Added DeviceInfo bit for SEP.
+ * Added PrimFlags and Primitive field to SAS IO Unit
+ * Control request, and added a new operation code.
* --------------------------------------------------------------------------
*/
#ifndef MPI_SAS_H
#define MPI_SAS_H
+
+/*
+ * Values for SASStatus.
+ */
+#define MPI_SASSTATUS_SUCCESS (0x00)
+#define MPI_SASSTATUS_UNKNOWN_ERROR (0x01)
+#define MPI_SASSTATUS_INVALID_FRAME (0x02)
+#define MPI_SASSTATUS_UTC_BAD_DEST (0x03)
+#define MPI_SASSTATUS_UTC_BREAK_RECEIVED (0x04)
+#define MPI_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05)
+#define MPI_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06)
+#define MPI_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07)
+#define MPI_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08)
+#define MPI_SASSTATUS_UTC_WRONG_DESTINATION (0x09)
+#define MPI_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A)
+#define MPI_SASSTATUS_LONG_INFORMATION_UNIT (0x0B)
+#define MPI_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C)
+#define MPI_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D)
+#define MPI_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E)
+#define MPI_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F)
+#define MPI_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10)
+#define MPI_SASSTATUS_DATA_OFFSET_ERROR (0x11)
+#define MPI_SASSTATUS_SDSF_NAK_RECEIVED (0x12)
+#define MPI_SASSTATUS_SDSF_CONNECTION_FAILED (0x13)
+#define MPI_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14)
+
+
+/*
+ * Values for the SAS DeviceInfo field used in SAS Device Status Change Event
+ * data and SAS IO Unit Configuration pages.
+ */
+#define MPI_SAS_DEVICE_INFO_SEP (0x00004000)
+#define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000)
+#define MPI_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000)
+#define MPI_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800)
+#define MPI_SAS_DEVICE_INFO_SSP_TARGET (0x00000400)
+#define MPI_SAS_DEVICE_INFO_STP_TARGET (0x00000200)
+#define MPI_SAS_DEVICE_INFO_SMP_TARGET (0x00000100)
+#define MPI_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080)
+#define MPI_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040)
+#define MPI_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020)
+#define MPI_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010)
+#define MPI_SAS_DEVICE_INFO_SATA_HOST (0x00000008)
+
+#define MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007)
+#define MPI_SAS_DEVICE_INFO_NO_DEVICE (0x00000000)
+#define MPI_SAS_DEVICE_INFO_END_DEVICE (0x00000001)
+#define MPI_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002)
+#define MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003)
+
+
+
/*****************************************************************************
*
* S e r i a l A t t a c h e d S C S I M e s s a g e s
} MSG_SMP_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REQUEST,
SmpPassthroughRequest_t, MPI_POINTER pSmpPassthroughRequest_t;
+/* values for PassthroughFlags field */
#define MPI_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80)
+/* values for ConnectionRate field */
#define MPI_SMP_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00)
#define MPI_SMP_PT_REQ_CONNECT_RATE_1_5 (0x08)
#define MPI_SMP_PT_REQ_CONNECT_RATE_3_0 (0x09)
#define MPI_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80)
-/* values for the SASStatus field */
-#define MPI_SASSTATUS_SUCCESS (0x00)
-#define MPI_SASSTATUS_UNKNOWN_ERROR (0x01)
-#define MPI_SASSTATUS_INVALID_FRAME (0x02)
-#define MPI_SASSTATUS_UTC_BAD_DEST (0x03)
-#define MPI_SASSTATUS_UTC_BREAK_RECEIVED (0x04)
-#define MPI_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05)
-#define MPI_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06)
-#define MPI_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07)
-#define MPI_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08)
-#define MPI_SASSTATUS_UTC_WRONG_DESTINATION (0x09)
-#define MPI_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A)
-#define MPI_SASSTATUS_LONG_INFORMATION_UNIT (0x0B)
-#define MPI_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C)
-#define MPI_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D)
-#define MPI_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E)
-#define MPI_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F)
-#define MPI_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10)
-#define MPI_SASSTATUS_DATA_OFFSET_ERROR (0x11)
-#define MPI_SASSTATUS_SDSF_NAK_RECEIVED (0x12)
-#define MPI_SASSTATUS_SDSF_CONNECTION_FAILED (0x13)
-#define MPI_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14)
+/****************************************************************************/
+/* SATA Passthrough Request */
+/****************************************************************************/
+
+typedef struct _MSG_SATA_PASSTHROUGH_REQUEST
+{
+ U8 TargetID; /* 00h */
+ U8 Bus; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U16 PassthroughFlags; /* 04h */
+ U8 ConnectionRate; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U32 Reserved1; /* 0Ch */
+ U32 Reserved2; /* 10h */
+ U32 Reserved3; /* 14h */
+ U32 DataLength; /* 18h */
+ U8 CommandFIS[20]; /* 1Ch */
+ SGE_SIMPLE_UNION SGL; /* 30h */
+} MSG_SATA_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REQUEST,
+ SataPassthroughRequest_t, MPI_POINTER pSataPassthroughRequest_t;
+
+/* values for PassthroughFlags field */
+#define MPI_SATA_PT_REQ_PT_FLAGS_RESET_DEVICE (0x0200)
+#define MPI_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100)
+#define MPI_SATA_PT_REQ_PT_FLAGS_DMA_QUEUED (0x0080)
+#define MPI_SATA_PT_REQ_PT_FLAGS_PACKET_COMMAND (0x0040)
+#define MPI_SATA_PT_REQ_PT_FLAGS_DMA (0x0020)
+#define MPI_SATA_PT_REQ_PT_FLAGS_PIO (0x0010)
+#define MPI_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004)
+#define MPI_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002)
+#define MPI_SATA_PT_REQ_PT_FLAGS_READ (0x0001)
+
+/* values for ConnectionRate field */
+#define MPI_SATA_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00)
+#define MPI_SATA_PT_REQ_CONNECT_RATE_1_5 (0x08)
+#define MPI_SATA_PT_REQ_CONNECT_RATE_3_0 (0x09)
+
+
+/* SATA Passthrough Reply */
+typedef struct _MSG_SATA_PASSTHROUGH_REPLY
+{
+ U8 TargetID; /* 00h */
+ U8 Bus; /* 01h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U16 PassthroughFlags; /* 04h */
+ U8 Reserved1; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U8 Reserved2; /* 0Ch */
+ U8 SASStatus; /* 0Dh */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+ U8 StatusFIS[20]; /* 14h */
+ U32 StatusControlRegisters; /* 28h */
+ U32 TransferCount; /* 2Ch */
+} MSG_SATA_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REPLY,
+ SataPassthroughReply_t, MPI_POINTER pSataPassthroughReply_t;
-/*
- * Values for the SAS DeviceInfo field used in SAS Device Status Change Event
- * data and SAS IO Unit Configuration pages.
- */
-#define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000)
-#define MPI_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000)
-#define MPI_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800)
-#define MPI_SAS_DEVICE_INFO_SSP_TARGET (0x00000400)
-#define MPI_SAS_DEVICE_INFO_STP_TARGET (0x00000200)
-#define MPI_SAS_DEVICE_INFO_SMP_TARGET (0x00000100)
-#define MPI_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080)
-#define MPI_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040)
-#define MPI_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020)
-#define MPI_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010)
-#define MPI_SAS_DEVICE_INFO_SATA_HOST (0x00000008)
-#define MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007)
-#define MPI_SAS_DEVICE_INFO_NO_DEVICE (0x00000000)
-#define MPI_SAS_DEVICE_INFO_END_DEVICE (0x00000001)
-#define MPI_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002)
-#define MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003)
/****************************************************************************/
U8 TargetID; /* 0Ch */
U8 Bus; /* 0Dh */
U8 PhyNum; /* 0Eh */
- U8 Reserved4; /* 0Fh */
- U32 Reserved5; /* 10h */
+ U8 PrimFlags; /* 0Fh */
+ U32 Primitive; /* 10h */
U64 SASAddress; /* 14h */
- U32 Reserved6; /* 1Ch */
+ U32 Reserved4; /* 1Ch */
} MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST,
SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t;
-/* values for the ... field */
-#define MPI_SAS_OP_CLEAR_NOT_PRESENT (0x01)
-#define MPI_SAS_OP_CLEAR_ALL (0x02)
-#define MPI_SAS_OP_MAP (0x03)
-#define MPI_SAS_OP_MOVE (0x04)
-#define MPI_SAS_OP_CLEAR (0x05)
-#define MPI_SAS_OP_PHY_LINK_RESET (0x06)
-#define MPI_SAS_OP_PHY_HARD_RESET (0x07)
-#define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08)
+/* values for the Operation field */
+#define MPI_SAS_OP_CLEAR_NOT_PRESENT (0x01)
+#define MPI_SAS_OP_CLEAR_ALL_PERSISTENT (0x02)
+#define MPI_SAS_OP_PHY_LINK_RESET (0x06)
+#define MPI_SAS_OP_PHY_HARD_RESET (0x07)
+#define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08)
+#define MPI_SAS_OP_MAP_CURRENT (0x09)
+#define MPI_SAS_OP_SEND_PRIMITIVE (0x0A)
+
+/* values for the PrimFlags field */
+#define MPI_SAS_PRIMFLAGS_SINGLE (0x08)
+#define MPI_SAS_PRIMFLAGS_TRIPLE (0x02)
+#define MPI_SAS_PRIMFLAGS_REDUNDANT (0x01)
/* SAS IO Unit Control Reply */
git://git.onelab.eu / linux-2.6.git / blobdiff