--- /dev/null
+/*
+ * esb2rom.c
+ *
+ * Normal mappings of flash chips in physical memory
+ * through the Intel ESB2 Southbridge.
+ *
+ * This was derived from ichxrom.c in May 2006 by
+ * Lew Glendenning <lglendenning@lnxi.com>
+ *
+ * Eric Biederman, of course, was a major help in this effort.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/cfi.h>
+#include <linux/mtd/flashchip.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/list.h>
+
+#define MOD_NAME KBUILD_BASENAME
+
+#define ADDRESS_NAME_LEN 18
+
+#define ROM_PROBE_STEP_SIZE (64*1024) /* 64KiB */
+
+#define BIOS_CNTL 0xDC
+#define BIOS_LOCK_ENABLE 0x02
+#define BIOS_WRITE_ENABLE 0x01
+
+/* This became a 16-bit register, and EN2 has disappeared */
+#define FWH_DEC_EN1 0xD8
+#define FWH_F8_EN 0x8000
+#define FWH_F0_EN 0x4000
+#define FWH_E8_EN 0x2000
+#define FWH_E0_EN 0x1000
+#define FWH_D8_EN 0x0800
+#define FWH_D0_EN 0x0400
+#define FWH_C8_EN 0x0200
+#define FWH_C0_EN 0x0100
+#define FWH_LEGACY_F_EN 0x0080
+#define FWH_LEGACY_E_EN 0x0040
+/* reserved 0x0020 and 0x0010 */
+#define FWH_70_EN 0x0008
+#define FWH_60_EN 0x0004
+#define FWH_50_EN 0x0002
+#define FWH_40_EN 0x0001
+
+/* these are 32-bit values */
+#define FWH_SEL1 0xD0
+#define FWH_SEL2 0xD4
+
+#define FWH_8MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
+ FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN | \
+ FWH_70_EN | FWH_60_EN | FWH_50_EN | FWH_40_EN)
+
+#define FWH_7MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
+ FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN | \
+ FWH_70_EN | FWH_60_EN | FWH_50_EN)
+
+#define FWH_6MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
+ FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN | \
+ FWH_70_EN | FWH_60_EN)
+
+#define FWH_5MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
+ FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN | \
+ FWH_70_EN)
+
+#define FWH_4MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
+ FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN)
+
+#define FWH_3_5MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
+ FWH_D8_EN | FWH_D0_EN | FWH_C8_EN)
+
+#define FWH_3MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
+ FWH_D8_EN | FWH_D0_EN)
+
+#define FWH_2_5MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
+ FWH_D8_EN)
+
+#define FWH_2MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN)
+
+#define FWH_1_5MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN)
+
+#define FWH_1MiB (FWH_F8_EN | FWH_F0_EN)
+
+#define FWH_0_5MiB (FWH_F8_EN)
+
+
+struct esb2rom_window {
+ void __iomem* virt;
+ unsigned long phys;
+ unsigned long size;
+ struct list_head maps;
+ struct resource rsrc;
+ struct pci_dev *pdev;
+};
+
+struct esb2rom_map_info {
+ struct list_head list;
+ struct map_info map;
+ struct mtd_info *mtd;
+ struct resource rsrc;
+ char map_name[sizeof(MOD_NAME) + 2 + ADDRESS_NAME_LEN];
+};
+
+static struct esb2rom_window esb2rom_window = {
+ .maps = LIST_HEAD_INIT(esb2rom_window.maps),
+};
+
+static void esb2rom_cleanup(struct esb2rom_window *window)
+{
+ struct esb2rom_map_info *map, *scratch;
+ u8 byte;
+
+ /* Disable writes through the rom window */
+ pci_read_config_byte(window->pdev, BIOS_CNTL, &byte);
+ pci_write_config_byte(window->pdev, BIOS_CNTL,
+ byte & ~BIOS_WRITE_ENABLE);
+
+ /* Free all of the mtd devices */
+ list_for_each_entry_safe(map, scratch, &window->maps, list) {
+ if (map->rsrc.parent)
+ release_resource(&map->rsrc);
+ del_mtd_device(map->mtd);
+ map_destroy(map->mtd);
+ list_del(&map->list);
+ kfree(map);
+ }
+ if (window->rsrc.parent)
+ release_resource(&window->rsrc);
+ if (window->virt) {
+ iounmap(window->virt);
+ window->virt = NULL;
+ window->phys = 0;
+ window->size = 0;
+ }
+ pci_dev_put(window->pdev);
+}
+
+static int __devinit esb2rom_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
+ struct esb2rom_window *window = &esb2rom_window;
+ struct esb2rom_map_info *map = NULL;
+ unsigned long map_top;
+ u8 byte;
+ u16 word;
+
+ /* For now I just handle the ecb2 and I assume there
+ * are not a lot of resources up at the top of the address
+ * space. It is possible to handle other devices in the
+ * top 16MiB but it is very painful. Also since
+ * you can only really attach a FWH to an ICHX there
+ * a number of simplifications you can make.
+ *
+ * Also you can page firmware hubs if an 8MiB window isn't enough
+ * but don't currently handle that case either.
+ */
+ window->pdev = pci_dev_get(pdev);
+
+ /* RLG: experiment 2. Force the window registers to the widest values */
+
+/*
+ pci_read_config_word(pdev, FWH_DEC_EN1, &word);
+ printk(KERN_DEBUG "Original FWH_DEC_EN1 : %x\n", word);
+ pci_write_config_byte(pdev, FWH_DEC_EN1, 0xff);
+ pci_read_config_byte(pdev, FWH_DEC_EN1, &byte);
+ printk(KERN_DEBUG "New FWH_DEC_EN1 : %x\n", byte);
+
+ pci_read_config_byte(pdev, FWH_DEC_EN2, &byte);
+ printk(KERN_DEBUG "Original FWH_DEC_EN2 : %x\n", byte);
+ pci_write_config_byte(pdev, FWH_DEC_EN2, 0x0f);
+ pci_read_config_byte(pdev, FWH_DEC_EN2, &byte);
+ printk(KERN_DEBUG "New FWH_DEC_EN2 : %x\n", byte);
+*/
+
+ /* Find a region continuous to the end of the ROM window */
+ window->phys = 0;
+ pci_read_config_word(pdev, FWH_DEC_EN1, &word);
+ printk(KERN_DEBUG "pci_read_config_byte : %x\n", word);
+
+ if ((word & FWH_8MiB) == FWH_8MiB)
+ window->phys = 0xff400000;
+ else if ((word & FWH_7MiB) == FWH_7MiB)
+ window->phys = 0xff500000;
+ else if ((word & FWH_6MiB) == FWH_6MiB)
+ window->phys = 0xff600000;
+ else if ((word & FWH_5MiB) == FWH_5MiB)
+ window->phys = 0xFF700000;
+ else if ((word & FWH_4MiB) == FWH_4MiB)
+ window->phys = 0xffc00000;
+ else if ((word & FWH_3_5MiB) == FWH_3_5MiB)
+ window->phys = 0xffc80000;
+ else if ((word & FWH_3MiB) == FWH_3MiB)
+ window->phys = 0xffd00000;
+ else if ((word & FWH_2_5MiB) == FWH_2_5MiB)
+ window->phys = 0xffd80000;
+ else if ((word & FWH_2MiB) == FWH_2MiB)
+ window->phys = 0xffe00000;
+ else if ((word & FWH_1_5MiB) == FWH_1_5MiB)
+ window->phys = 0xffe80000;
+ else if ((word & FWH_1MiB) == FWH_1MiB)
+ window->phys = 0xfff00000;
+ else if ((word & FWH_0_5MiB) == FWH_0_5MiB)
+ window->phys = 0xfff80000;
+
+ /* reserved 0x0020 and 0x0010 */
+ window->phys -= 0x400000UL;
+ window->size = (0xffffffffUL - window->phys) + 1UL;
+
+ /* Enable writes through the rom window */
+ pci_read_config_byte(pdev, BIOS_CNTL, &byte);
+ if (!(byte & BIOS_WRITE_ENABLE) && (byte & (BIOS_LOCK_ENABLE))) {
+ /* The BIOS will generate an error if I enable
+ * this device, so don't even try.
+ */
+ printk(KERN_ERR MOD_NAME ": firmware access control, I can't enable writes\n");
+ goto out;
+ }
+ pci_write_config_byte(pdev, BIOS_CNTL, byte | BIOS_WRITE_ENABLE);
+
+ /*
+ * Try to reserve the window mem region. If this fails then
+ * it is likely due to the window being "reseved" by the BIOS.
+ */
+ window->rsrc.name = MOD_NAME;
+ window->rsrc.start = window->phys;
+ window->rsrc.end = window->phys + window->size - 1;
+ window->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ if (request_resource(&iomem_resource, &window->rsrc)) {
+ window->rsrc.parent = NULL;
+ printk(KERN_DEBUG MOD_NAME
+ ": %s(): Unable to register resource"
+ " 0x%.08llx-0x%.08llx - kernel bug?\n",
+ __func__,
+ (unsigned long long)window->rsrc.start,
+ (unsigned long long)window->rsrc.end);
+ }
+
+ /* Map the firmware hub into my address space. */
+ window->virt = ioremap_nocache(window->phys, window->size);
+ if (!window->virt) {
+ printk(KERN_ERR MOD_NAME ": ioremap(%08lx, %08lx) failed\n",
+ window->phys, window->size);
+ goto out;
+ }
+
+ /* Get the first address to look for an rom chip at */
+ map_top = window->phys;
+ if ((window->phys & 0x3fffff) != 0) {
+ /* if not aligned on 4MiB, look 4MiB lower in address space */
+ map_top = window->phys + 0x400000;
+ }
+#if 1
+ /* The probe sequence run over the firmware hub lock
+ * registers sets them to 0x7 (no access).
+ * (Insane hardware design, but most copied Intel's.)
+ * ==> Probe at most the last 4M of the address space.
+ */
+ if (map_top < 0xffc00000)
+ map_top = 0xffc00000;
+#endif
+ /* Loop through and look for rom chips */
+ while ((map_top - 1) < 0xffffffffUL) {
+ struct cfi_private *cfi;
+ unsigned long offset;
+ int i;
+
+ if (!map)
+ map = kmalloc(sizeof(*map), GFP_KERNEL);
+ if (!map) {
+ printk(KERN_ERR MOD_NAME ": kmalloc failed");
+ goto out;
+ }
+ memset(map, 0, sizeof(*map));
+ INIT_LIST_HEAD(&map->list);
+ map->map.name = map->map_name;
+ map->map.phys = map_top;
+ offset = map_top - window->phys;
+ map->map.virt = (void __iomem *)
+ (((unsigned long)(window->virt)) + offset);
+ map->map.size = 0xffffffffUL - map_top + 1UL;
+ /* Set the name of the map to the address I am trying */
+ sprintf(map->map_name, "%s @%08lx",
+ MOD_NAME, map->map.phys);
+
+ /* Firmware hubs only use vpp when being programmed
+ * in a factory setting. So in-place programming
+ * needs to use a different method.
+ */
+ for(map->map.bankwidth = 32; map->map.bankwidth;
+ map->map.bankwidth >>= 1) {
+ char **probe_type;
+ /* Skip bankwidths that are not supported */
+ if (!map_bankwidth_supported(map->map.bankwidth))
+ continue;
+
+ /* Setup the map methods */
+ simple_map_init(&map->map);
+
+ /* Try all of the probe methods */
+ probe_type = rom_probe_types;
+ for(; *probe_type; probe_type++) {
+ map->mtd = do_map_probe(*probe_type, &map->map);
+ if (map->mtd)
+ goto found;
+ }
+ }
+ map_top += ROM_PROBE_STEP_SIZE;
+ continue;
+ found:
+ /* Trim the size if we are larger than the map */
+ if (map->mtd->size > map->map.size) {
+ printk(KERN_WARNING MOD_NAME
+ " rom(%u) larger than window(%lu). fixing...\n",
+ map->mtd->size, map->map.size);
+ map->mtd->size = map->map.size;
+ }
+ if (window->rsrc.parent) {
+ /*
+ * Registering the MTD device in iomem may not be possible
+ * if there is a BIOS "reserved" and BUSY range. If this
+ * fails then continue anyway.
+ */
+ map->rsrc.name = map->map_name;
+ map->rsrc.start = map->map.phys;
+ map->rsrc.end = map->map.phys + map->mtd->size - 1;
+ map->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ if (request_resource(&window->rsrc, &map->rsrc)) {
+ printk(KERN_ERR MOD_NAME
+ ": cannot reserve MTD resource\n");
+ map->rsrc.parent = NULL;
+ }
+ }
+
+ /* Make the whole region visible in the map */
+ map->map.virt = window->virt;
+ map->map.phys = window->phys;
+ cfi = map->map.fldrv_priv;
+ for(i = 0; i < cfi->numchips; i++)
+ cfi->chips[i].start += offset;
+
+ /* Now that the mtd devices is complete claim and export it */
+ map->mtd->owner = THIS_MODULE;
+ if (add_mtd_device(map->mtd)) {
+ map_destroy(map->mtd);
+ map->mtd = NULL;
+ goto out;
+ }
+
+ /* Calculate the new value of map_top */
+ map_top += map->mtd->size;
+
+ /* File away the map structure */
+ list_add(&map->list, &window->maps);
+ map = NULL;
+ }
+
+ out:
+ /* Free any left over map structures */
+ kfree(map);
+
+ /* See if I have any map structures */
+ if (list_empty(&window->maps)) {
+ esb2rom_cleanup(window);
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static void __devexit esb2rom_remove_one (struct pci_dev *pdev)
+{
+ struct esb2rom_window *window = &esb2rom_window;
+ esb2rom_cleanup(window);
+}
+
+static struct pci_device_id esb2rom_pci_tbl[] __devinitdata = {
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { 0, },
+};
+
+#if 0
+MODULE_DEVICE_TABLE(pci, esb2rom_pci_tbl);
+
+static struct pci_driver esb2rom_driver = {
+ .name = MOD_NAME,
+ .id_table = esb2rom_pci_tbl,
+ .probe = esb2rom_init_one,
+ .remove = esb2rom_remove_one,
+};
+#endif
+
+static int __init init_esb2rom(void)
+{
+ struct pci_dev *pdev;
+ struct pci_device_id *id;
+ int retVal;
+
+ pdev = NULL;
+ for (id = esb2rom_pci_tbl; id->vendor; id++) {
+ printk(KERN_DEBUG "device id = %x\n", id->device);
+ pdev = pci_get_device(id->vendor, id->device, NULL);
+ if (pdev) {
+ printk(KERN_DEBUG "matched device = %x\n", id->device);
+ break;
+ }
+ }
+ if (pdev) {
+ printk(KERN_DEBUG "matched device id %x\n", id->device);
+ retVal = esb2rom_init_one(pdev, &esb2rom_pci_tbl[0]);
+ pci_dev_put(pdev);
+ printk(KERN_DEBUG "retVal = %d\n", retVal);
+ return retVal;
+ }
+ return -ENXIO;
+#if 0
+ return pci_register_driver(&esb2rom_driver);
+#endif
+}
+
+static void __exit cleanup_esb2rom(void)
+{
+ esb2rom_remove_one(esb2rom_window.pdev);
+}
+
+module_init(init_esb2rom);
+module_exit(cleanup_esb2rom);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Lew Glendenning <lglendenning@lnxi.com>");
+MODULE_DESCRIPTION("MTD map driver for BIOS chips on the ESB2 southbridge");
git://git.onelab.eu / linux-2.6.git / blobdiff