/*
- * $Id: ixp4xx.c,v 1.7 2004/11/04 13:24:15 gleixner Exp $
+ * $Id: ixp4xx.c,v 1.13 2005/11/16 16:23:21 dvrabel Exp $
*
* drivers/mtd/maps/ixp4xx.c
*
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
+
#include <asm/io.h>
-#include <asm/mach-types.h>
#include <asm/mach/flash.h>
#include <linux/reboot.h>
+/*
+ * Read/write a 16 bit word from flash address 'addr'.
+ *
+ * When the cpu is in little-endian mode it swizzles the address lines
+ * ('address coherency') so we need to undo the swizzling to ensure commands
+ * and the like end up on the correct flash address.
+ *
+ * To further complicate matters, due to the way the expansion bus controller
+ * handles 32 bit reads, the byte stream ABCD is stored on the flash as:
+ * D15 D0
+ * +---+---+
+ * | A | B | 0
+ * +---+---+
+ * | C | D | 2
+ * +---+---+
+ * This means that on LE systems each 16 bit word must be swapped. Note that
+ * this requires CONFIG_MTD_CFI_BE_BYTE_SWAP to be enabled to 'unswap' the CFI
+ * data and other flash commands which are always in D7-D0.
+ */
#ifndef __ARMEB__
+#ifndef CONFIG_MTD_CFI_BE_BYTE_SWAP
+# error CONFIG_MTD_CFI_BE_BYTE_SWAP required
+#endif
+
+static inline u16 flash_read16(void __iomem *addr)
+{
+ return be16_to_cpu(__raw_readw((void __iomem *)((unsigned long)addr ^ 0x2)));
+}
+
+static inline void flash_write16(u16 d, void __iomem *addr)
+{
+ __raw_writew(cpu_to_be16(d), (void __iomem *)((unsigned long)addr ^ 0x2));
+}
+
#define BYTE0(h) ((h) & 0xFF)
#define BYTE1(h) (((h) >> 8) & 0xFF)
+
#else
+
+static inline u16 flash_read16(const void __iomem *addr)
+{
+ return __raw_readw(addr);
+}
+
+static inline void flash_write16(u16 d, void __iomem *addr)
+{
+ __raw_writew(d, addr);
+}
+
#define BYTE0(h) (((h) >> 8) & 0xFF)
#define BYTE1(h) ((h) & 0xFF)
#endif
static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs)
{
map_word val;
- val.x[0] = *(__u16 *) (map->map_priv_1 + ofs);
+ val.x[0] = flash_read16(map->virt + ofs);
return val;
}
static void ixp4xx_copy_from(struct map_info *map, void *to,
unsigned long from, ssize_t len)
{
- int i;
u8 *dest = (u8 *) to;
- u16 *src = (u16 *) (map->map_priv_1 + from);
- u16 data;
+ void __iomem *src = map->virt + from;
+
+ if (len <= 0)
+ return;
- for (i = 0; i < (len / 2); i++) {
- data = src[i];
- dest[i * 2] = BYTE0(data);
- dest[i * 2 + 1] = BYTE1(data);
+ if (from & 1) {
+ *dest++ = BYTE1(flash_read16(src));
+ src++;
+ --len;
}
- if (len & 1)
- dest[len - 1] = BYTE0(src[i]);
+ while (len >= 2) {
+ u16 data = flash_read16(src);
+ *dest++ = BYTE0(data);
+ *dest++ = BYTE1(data);
+ src += 2;
+ len -= 2;
+ }
+
+ if (len > 0)
+ *dest++ = BYTE0(flash_read16(src));
}
-/*
+/*
* Unaligned writes are ignored, causing the 8-bit
* probe to fail and proceed to the 16-bit probe (which succeeds).
*/
static void ixp4xx_probe_write16(struct map_info *map, map_word d, unsigned long adr)
{
if (!(adr & 1))
- *(__u16 *) (map->map_priv_1 + adr) = d.x[0];
+ flash_write16(d.x[0], map->virt + adr);
}
-/*
+/*
* Fast write16 function without the probing check above
*/
static void ixp4xx_write16(struct map_info *map, map_word d, unsigned long adr)
{
- *(__u16 *) (map->map_priv_1 + adr) = d.x[0];
+ flash_write16(d.x[0], map->virt + adr);
}
struct ixp4xx_flash_info {
static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
-static int ixp4xx_flash_remove(struct device *_dev)
+static int ixp4xx_flash_remove(struct platform_device *dev)
{
- struct platform_device *dev = to_platform_device(_dev);
struct flash_platform_data *plat = dev->dev.platform_data;
- struct ixp4xx_flash_info *info = dev_get_drvdata(&dev->dev);
- map_word d;
+ struct ixp4xx_flash_info *info = platform_get_drvdata(dev);
- dev_set_drvdata(&dev->dev, NULL);
+ platform_set_drvdata(dev, NULL);
if(!info)
return 0;
- /*
- * This is required for a soft reboot to work.
- */
- d.x[0] = 0xff;
- ixp4xx_write16(&info->map, d, 0x55 * 0x2);
-
if (info->mtd) {
del_mtd_partitions(info->mtd);
map_destroy(info->mtd);
}
- if (info->map.map_priv_1)
- iounmap((void *) info->map.map_priv_1);
+ if (info->map.virt)
+ iounmap(info->map.virt);
- if (info->partitions)
- kfree(info->partitions);
+ kfree(info->partitions);
if (info->res) {
release_resource(info->res);
if (plat->exit)
plat->exit();
- /* Disable flash write */
- *IXP4XX_EXP_CS0 &= ~IXP4XX_FLASH_WRITABLE;
-
return 0;
}
-static int ixp4xx_flash_probe(struct device *_dev)
+static int ixp4xx_flash_probe(struct platform_device *dev)
{
- struct platform_device *dev = to_platform_device(_dev);
struct flash_platform_data *plat = dev->dev.platform_data;
struct ixp4xx_flash_info *info;
int err = -1;
if(!info) {
err = -ENOMEM;
goto Error;
- }
+ }
memzero(info, sizeof(struct ixp4xx_flash_info));
- dev_set_drvdata(&dev->dev, info);
-
- /*
- * Enable flash write
- * TODO: Move this out to board specific code
- */
- *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
+ platform_set_drvdata(dev, info);
/*
* Tell the MTD layer we're not 1:1 mapped so that it does
info->map.write = ixp4xx_probe_write16,
info->map.copy_from = ixp4xx_copy_from,
- info->res = request_mem_region(dev->resource->start,
- dev->resource->end - dev->resource->start + 1,
+ info->res = request_mem_region(dev->resource->start,
+ dev->resource->end - dev->resource->start + 1,
"IXP4XXFlash");
if (!info->res) {
printk(KERN_ERR "IXP4XXFlash: Could not reserve memory region\n");
goto Error;
}
- info->map.map_priv_1 = ioremap(dev->resource->start,
- dev->resource->end - dev->resource->start + 1);
- if (!info->map.map_priv_1) {
+ info->map.virt = ioremap(dev->resource->start,
+ dev->resource->end - dev->resource->start + 1);
+ if (!info->map.virt) {
printk(KERN_ERR "IXP4XXFlash: Failed to ioremap region\n");
err = -EIO;
goto Error;
goto Error;
}
info->mtd->owner = THIS_MODULE;
-
+
/* Use the fast version */
info->map.write = ixp4xx_write16,
return 0;
Error:
- ixp4xx_flash_remove(_dev);
+ ixp4xx_flash_remove(dev);
return err;
}
-static struct device_driver ixp4xx_flash_driver = {
- .name = "IXP4XX-Flash",
- .bus = &platform_bus_type,
+static struct platform_driver ixp4xx_flash_driver = {
.probe = ixp4xx_flash_probe,
.remove = ixp4xx_flash_remove,
+ .driver = {
+ .name = "IXP4XX-Flash",
+ },
};
static int __init ixp4xx_flash_init(void)
{
- return driver_register(&ixp4xx_flash_driver);
+ return platform_driver_register(&ixp4xx_flash_driver);
}
static void __exit ixp4xx_flash_exit(void)
{
- driver_unregister(&ixp4xx_flash_driver);
+ platform_driver_unregister(&ixp4xx_flash_driver);
}
module_exit(ixp4xx_flash_exit);
MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("MTD map driver for Intel IXP4xx systems")
+MODULE_DESCRIPTION("MTD map driver for Intel IXP4xx systems");
MODULE_AUTHOR("Deepak Saxena");
-
git://git.onelab.eu / linux-2.6.git / blobdiff