* Derived from drivers/mtd/spia.c
* Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
*
- * $Id: autcpu12.c,v 1.20 2004/07/20 02:44:26 dwmw2 Exp $
+ * $Id: autcpu12.c,v 1.11 2003/06/04 17:04:09 gleixner Exp $
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* Overview:
* This is a device driver for the NAND flash device found on the
* autronix autcpu12 board, which is a SmartMediaCard. It supports
- * 16MiB, 32MiB and 64MiB cards.
+ * 16MB, 32MB and 64MB cards.
*
*
* 02-12-2002 TG Cleanup of module params
*/
static struct mtd_info *autcpu12_mtd = NULL;
+/*
+ * Module stuff
+ */
+#if LINUX_VERSION_CODE < 0x20212 && defined(MODULE)
+#define autcpu12_init init_module
+#define autcpu12_cleanup cleanup_module
+#endif
+
static int autcpu12_io_base = CS89712_VIRT_BASE;
static int autcpu12_fio_pbase = AUTCPU12_PHYS_SMC;
static int autcpu12_fio_ctrl = AUTCPU12_SMC_SELECT_OFFSET;
/*
* Define partitions for flash devices
*/
+extern struct nand_oobinfo jffs2_oobinfo;
+
static struct mtd_partition partition_info16k[] = {
- { .name = "AUTCPU12 flash partition 1",
- .offset = 0,
- .size = 8 * SZ_1M },
- { .name = "AUTCPU12 flash partition 2",
- .offset = 8 * SZ_1M,
- .size = 8 * SZ_1M },
+ { .name = "AUTCPU12 flash partition 1",
+ .offset = 0,
+ .size = 8 * SZ_1M },
+ { .name = "AUTCPU12 flash partition 2",
+ .offset = 8 * SZ_1M,
+ .size = 8 * SZ_1M },
};
static struct mtd_partition partition_info32k[] = {
- { .name = "AUTCPU12 flash partition 1",
- .offset = 0,
- .size = 8 * SZ_1M },
- { .name = "AUTCPU12 flash partition 2",
- .offset = 8 * SZ_1M,
- .size = 24 * SZ_1M },
+ { .name = "AUTCPU12 flash partition 1",
+ .offset = 0,
+ .size = 8 * SZ_1M },
+ { .name = "AUTCPU12 flash partition 2",
+ .offset = 8 * SZ_1M,
+ .size = 24 * SZ_1M },
};
static struct mtd_partition partition_info64k[] = {
- { .name = "AUTCPU12 flash partition 1",
- .offset = 0,
- .size = 16 * SZ_1M },
- { .name = "AUTCPU12 flash partition 2",
- .offset = 16 * SZ_1M,
- .size = 48 * SZ_1M },
+ { .name = "AUTCPU12 flash partition 1",
+ .offset = 0,
+ .size = 16 * SZ_1M },
+ { .name = "AUTCPU12 flash partition 2",
+ .offset = 16 * SZ_1M,
+ .size = 48 * SZ_1M },
};
static struct mtd_partition partition_info128k[] = {
- { .name = "AUTCPU12 flash partition 1",
- .offset = 0,
- .size = 16 * SZ_1M },
- { .name = "AUTCPU12 flash partition 2",
- .offset = 16 * SZ_1M,
- .size = 112 * SZ_1M },
+ { .name = "AUTCPU12 flash partition 1",
+ .offset = 0,
+ .size = 16 * SZ_1M },
+ { .name = "AUTCPU12 flash partition 2",
+ .offset = 16 * SZ_1M,
+ .size = 112 * SZ_1M },
};
#define NUM_PARTITIONS16K 2
/*
* hardware specific access to control-lines
*/
-static void autcpu12_hwcontrol(struct mtd_info *mtd, int cmd)
+void autcpu12_hwcontrol(int cmd)
{
switch(cmd){
/*
* read device ready pin
*/
-int autcpu12_device_ready(struct mtd_info *mtd)
+int autcpu12_device_ready(void)
{
return ( (*(volatile unsigned char *) (autcpu12_io_base + autcpu12_pedr)) & AUTCPU12_SMC_RDY) ? 1 : 0;
}
-
/*
* Main initialization routine
*/
this->chip_delay = 20;
this->eccmode = NAND_ECC_SOFT;
- /* Enable the following for a flash based bad block table */
- /*
- this->options = NAND_USE_FLASH_BBT;
- */
- this->options = NAND_USE_FLASH_BBT;
-
/* Scan to find existance of the device */
- if (nand_scan (autcpu12_mtd, 1)) {
+ if (nand_scan (autcpu12_mtd)) {
err = -ENXIO;
goto out_ior;
}
-
+
+ /* Allocate memory for internal data buffer */
+ this->data_buf = kmalloc (sizeof(u_char) * (autcpu12_mtd->oobblock + autcpu12_mtd->oobsize), GFP_KERNEL);
+ if (!this->data_buf) {
+ printk ("Unable to allocate NAND data buffer for AUTCPU12.\n");
+ err = -ENOMEM;
+ goto out_ior;
+ }
+
/* Register the partitions */
switch(autcpu12_mtd->size){
case SZ_16M: add_mtd_partitions(autcpu12_mtd, partition_info16k, NUM_PARTITIONS16K); break;
default: {
printk ("Unsupported SmartMedia device\n");
err = -ENXIO;
- goto out_ior;
+ goto out_buf;
}
}
goto out;
+out_buf:
+ kfree (this->data_buf);
out_ior:
iounmap((void *)autcpu12_fio_base);
out_mtd:
#ifdef MODULE
static void __exit autcpu12_cleanup (void)
{
- /* Release resources, unregister device */
- nand_release (autcpu12_mtd);
+ struct nand_chip *this = (struct nand_chip *) &autcpu12_mtd[1];
+
+ /* Unregister partitions */
+ del_mtd_partitions(autcpu12_mtd);
+
+ /* Unregister the device */
+ del_mtd_device (autcpu12_mtd);
+
+ /* Free internal data buffers */
+ kfree (this->data_buf);
/* unmap physical adress */
iounmap((void *)autcpu12_fio_base);
-
+
/* Free the MTD device structure */
kfree (autcpu12_mtd);
}