Stuart Adamson <stuart.adamson@compsoc.net>
Nov 2001
added support for ethtool (jgarzik)
-
+
$Header: /fsys2/home/chrisb/linux-1.3.59-MCA/drivers/net/RCS/3c523.c,v 1.1 1996/02/05 01:53:46 chrisb Exp chrisb $
*/
#include <linux/mca-legacy.h>
#include <linux/ethtool.h>
#include <linux/bitops.h>
+#include <linux/jiffies.h>
#include <asm/uaccess.h>
#include <asm/processor.h>
dev->name,__LINE__); \
elmc_id_reset586(); } } }
-static irqreturn_t elmc_interrupt(int irq, void *dev_id, struct pt_regs *reg_ptr);
+static irqreturn_t elmc_interrupt(int irq, void *dev_id);
static int elmc_open(struct net_device *dev);
static int elmc_close(struct net_device *dev);
static int elmc_send_packet(struct sk_buff *, struct net_device *);
#ifdef ELMC_MULTICAST
static void set_multicast_list(struct net_device *dev);
#endif
-static struct ethtool_ops netdev_ethtool_ops;
+static const struct ethtool_ops netdev_ethtool_ops;
/* helper-functions */
static int init586(struct net_device *dev);
elmc_id_attn586(); /* disable interrupts */
- ret = request_irq(dev->irq, &elmc_interrupt, SA_SHIRQ | SA_SAMPLE_RANDOM,
+ ret = request_irq(dev->irq, &elmc_interrupt, IRQF_SHARED | IRQF_SAMPLE_RANDOM,
dev->name, dev);
if (ret) {
printk(KERN_ERR "%s: couldn't get irq %d\n", dev->name, dev->irq);
dev->irq=irq_table[(status & ELMC_STATUS_IRQ_SELECT) >> 6];
dev->base_addr=csr_table[(status & ELMC_STATUS_CSR_SELECT) >> 1];
-
+
/*
If we're trying to match a specified irq or IO address,
we'll reject a match unless it's what we're looking for.
Also reject it if the card is already in use.
*/
- if ((irq && irq != dev->irq) ||
+ if ((irq && irq != dev->irq) ||
(base_addr && base_addr != dev->base_addr)) {
slot = mca_find_adapter(ELMC_MCA_ID, slot + 1);
continue;
/* dump all the assorted information */
printk(KERN_INFO "%s: IRQ %d, %sternal xcvr, memory %#lx-%#lx.\n", dev->name,
- dev->irq, dev->if_port ? "ex" : "in",
+ dev->irq, dev->if_port ? "ex" : "in",
dev->mem_start, dev->mem_end - 1);
/* The hardware address for the 3c523 is stored in the first six
dev->set_multicast_list = NULL;
#endif
dev->ethtool_ops = &netdev_ethtool_ops;
-
+
/* note that we haven't actually requested the IRQ from the kernel.
That gets done in elmc_open(). I'm not sure that's such a good idea,
but it works, so I'll go with it. */
release_region(dev->base_addr, ELMC_IO_EXTENT);
return retval;
}
-
+
static void cleanup_card(struct net_device *dev)
{
mca_set_adapter_procfn(((struct priv *) (dev->priv))->slot, NULL, NULL);
s = jiffies; /* warning: only active with interrupts on !! */
while (!(cfg_cmd->cmd_status & STAT_COMPL)) {
- if (jiffies - s > 30*HZ/100)
+ if (time_after(jiffies, s + 30*HZ/100))
break;
}
s = jiffies;
while (!(ias_cmd->cmd_status & STAT_COMPL)) {
- if (jiffies - s > 30*HZ/100)
+ if (time_after(jiffies, s + 30*HZ/100))
break;
}
s = jiffies;
while (!(tdr_cmd->cmd_status & STAT_COMPL)) {
- if (jiffies - s > 30*HZ/100) {
+ if (time_after(jiffies, s + 30*HZ/100)) {
printk(KERN_WARNING "%s: %d Problems while running the TDR.\n", dev->name, __LINE__);
result = 1;
break;
elmc_id_attn586();
s = jiffies;
while (!(mc_cmd->cmd_status & STAT_COMPL)) {
- if (jiffies - s > 30*HZ/100)
+ if (time_after(jiffies, s + 30*HZ/100))
break;
}
if (!(mc_cmd->cmd_status & STAT_COMPL)) {
*/
static irqreturn_t
-elmc_interrupt(int irq, void *dev_id, struct pt_regs *reg_ptr)
+elmc_interrupt(int irq, void *dev_id)
{
- struct net_device *dev = (struct net_device *) dev_id;
+ struct net_device *dev = dev_id;
unsigned short stat;
struct priv *p;
- if (dev == NULL) {
- printk(KERN_ERR "elmc-interrupt: irq %d for unknown device.\n", (int) -(((struct pt_regs *) reg_ptr)->orig_eax + 2));
- return IRQ_NONE;
- } else if (!netif_running(dev)) {
+ if (!netif_running(dev)) {
/* The 3c523 has this habit of generating interrupts during the
reset. I'm not sure if the ni52 has this same problem, but it's
really annoying if we haven't finished initializing it. I was
p = (struct priv *) dev->priv;
- while ((stat = p->scb->status & STAT_MASK))
+ while ((stat = p->scb->status & STAT_MASK))
{
p->scb->cmd = stat;
elmc_attn586(); /* ack inter. */
/******************************************************
* timeout
*/
-
+
static void elmc_timeout(struct net_device *dev)
{
struct priv *p = (struct priv *) dev->priv;
elmc_open(dev);
}
}
-
+
/******************************************************
* send frame
*/
netif_stop_queue(dev);
len = (ETH_ZLEN < skb->len) ? skb->len : ETH_ZLEN;
-
+
if (len != skb->len)
memset((char *) p->xmit_cbuffs[p->xmit_count], 0, ETH_ZLEN);
memcpy((char *) p->xmit_cbuffs[p->xmit_count], (char *) (skb->data), skb->len);
#else
next_nop = (p->nop_point + 1) & 0x1;
p->xmit_buffs[0]->size = TBD_LAST | len;
-
+
p->xmit_cmds[0]->cmd_link = p->nop_cmds[next_nop]->cmd_link
= make16((p->nop_cmds[next_nop]));
p->xmit_cmds[0]->cmd_status = p->nop_cmds[next_nop]->cmd_status = 0;
sprintf(info->bus_info, "MCA 0x%lx", dev->base_addr);
}
-static struct ethtool_ops netdev_ethtool_ops = {
+static const struct ethtool_ops netdev_ethtool_ops = {
.get_drvinfo = netdev_get_drvinfo,
};
MODULE_PARM_DESC(irq, "EtherLink/MC IRQ number(s)");
MODULE_LICENSE("GPL");
-int init_module(void)
+int __init init_module(void)
{
int this_dev,found = 0;
- /* Loop until we either can't find any more cards, or we have MAX_3C523_CARDS */
+ /* Loop until we either can't find any more cards, or we have MAX_3C523_CARDS */
for(this_dev=0; this_dev<MAX_3C523_CARDS; this_dev++) {
struct net_device *dev = alloc_etherdev(sizeof(struct priv));
if (!dev)
} else return 0;
}
-void cleanup_module(void)
+void __exit cleanup_module(void)
{
int this_dev;
for (this_dev=0; this_dev<MAX_3C523_CARDS; this_dev++) {
git://git.onelab.eu / linux-2.6.git / blobdiff