410 Severn Ave., Suite 210
Annapolis MD 21403
- Linux Kernel Additions:
-
- 0.99H+lk0.9 - David S. Miller - softnet, PCI DMA updates
- 0.99H+lk1.0 - Jeff Garzik <jgarzik@pobox.com>
- Remove compatibility defines for kernel versions < 2.2.x.
- Update for new 2.3.x module interface
- LK1.1.2 (March 19, 2000)
- * New PCI interface (jgarzik)
-
- LK1.1.3 25 April 2000, Andrew Morton <andrewm@uow.edu.au>
- - Merged with 3c575_cb.c
- - Don't set RxComplete in boomerang interrupt enable reg
- - spinlock in vortex_timer to protect mdio functions
- - disable local interrupts around call to vortex_interrupt in
- vortex_tx_timeout() (So vortex_interrupt can use spin_lock())
- - Select window 3 in vortex_timer()'s write to Wn3_MAC_Ctrl
- - In vortex_start_xmit(), move the lock to _after_ we've altered
- vp->cur_tx and vp->tx_full. This defeats the race between
- vortex_start_xmit() and vortex_interrupt which was identified
- by Bogdan Costescu.
- - Merged back support for six new cards from various sources
- - Set vortex_have_pci if pci_module_init returns zero (fixes cardbus
- insertion oops)
- - Tell it that 3c905C has NWAY for 100bT autoneg
- - Fix handling of SetStatusEnd in 'Too much work..' code, as
- per 2.3.99's 3c575_cb (Dave Hinds).
- - Split ISR into two for vortex & boomerang
- - Fix MOD_INC/DEC races
- - Handle resource allocation failures.
- - Fix 3CCFE575CT LED polarity
- - Make tx_interrupt_mitigation the default
-
- LK1.1.4 25 April 2000, Andrew Morton <andrewm@uow.edu.au>
- - Add extra TxReset to vortex_up() to fix 575_cb hotplug initialisation probs.
- - Put vortex_info_tbl into __devinitdata
- - In the vortex_error StatsFull HACK, disable stats in vp->intr_enable as well
- as in the hardware.
- - Increased the loop counter in issue_and_wait from 2,000 to 4,000.
-
- LK1.1.5 28 April 2000, andrewm
- - Added powerpc defines (John Daniel <jdaniel@etresoft.com> said these work...)
- - Some extra diagnostics
- - In vortex_error(), reset the Tx on maxCollisions. Otherwise most
- chips usually get a Tx timeout.
- - Added extra_reset module parm
- - Replaced some inline timer manip with mod_timer
- (Franois romieu <Francois.Romieu@nic.fr>)
- - In vortex_up(), don't make Wn3_config initialisation dependent upon has_nway
- (this came across from 3c575_cb).
-
- LK1.1.6 06 Jun 2000, andrewm
- - Backed out the PPC defines.
- - Use del_timer_sync(), mod_timer().
- - Fix wrapped ulong comparison in boomerang_rx()
- - Add IS_TORNADO, use it to suppress 3c905C checksum error msg
- (Donald Becker, I Lee Hetherington <ilh@sls.lcs.mit.edu>)
- - Replace union wn3_config with BFINS/BFEXT manipulation for
- sparc64 (Pete Zaitcev, Peter Jones)
- - In vortex_error, do_tx_reset and vortex_tx_timeout(Vortex):
- do a netif_wake_queue() to better recover from errors. (Anders Pedersen,
- Donald Becker)
- - Print a warning on out-of-memory (rate limited to 1 per 10 secs)
- - Added two more Cardbus 575 NICs: 5b57 and 6564 (Paul Wagland)
-
- LK1.1.7 2 Jul 2000 andrewm
- - Better handling of shared IRQs
- - Reset the transmitter on a Tx reclaim error
- - Fixed crash under OOM during vortex_open() (Mark Hemment)
- - Fix Rx cessation problem during OOM (help from Mark Hemment)
- - The spinlocks around the mdio access were blocking interrupts for 300uS.
- Fix all this to use spin_lock_bh() within mdio_read/write
- - Only write to TxFreeThreshold if it's a boomerang - other NICs don't
- have one.
- - Added 802.3x MAC-layer flow control support
-
- LK1.1.8 13 Aug 2000 andrewm
- - Ignore request_region() return value - already reserved if Cardbus.
- - Merged some additional Cardbus flags from Don's 0.99Qk
- - Some fixes for 3c556 (Fred Maciel)
- - Fix for EISA initialisation (Jan Rekorajski)
- - Renamed MII_XCVR_PWR and EEPROM_230 to align with 3c575_cb and D. Becker's drivers
- - Fixed MII_XCVR_PWR for 3CCFE575CT
- - Added INVERT_LED_PWR, used it.
- - Backed out the extra_reset stuff
-
- LK1.1.9 12 Sep 2000 andrewm
- - Backed out the tx_reset_resume flags. It was a no-op.
- - In vortex_error, don't reset the Tx on txReclaim errors
- - In vortex_error, don't reset the Tx on maxCollisions errors.
- Hence backed out all the DownListPtr logic here.
- - In vortex_error, give Tornado cards a partial TxReset on
- maxCollisions (David Hinds). Defined MAX_COLLISION_RESET for this.
- - Redid some driver flags and device names based on pcmcia_cs-3.1.20.
- - Fixed a bug where, if vp->tx_full is set when the interface
- is downed, it remains set when the interface is upped. Bad
- things happen.
-
- LK1.1.10 17 Sep 2000 andrewm
- - Added EEPROM_8BIT for 3c555 (Fred Maciel)
- - Added experimental support for the 3c556B Laptop Hurricane (Louis Gerbarg)
- - Add HAS_NWAY to "3c900 Cyclone 10Mbps TPO"
-
- LK1.1.11 13 Nov 2000 andrewm
- - Dump MOD_INC/DEC_USE_COUNT, use SET_MODULE_OWNER
-
- LK1.1.12 1 Jan 2001 andrewm (2.4.0-pre1)
- - Call pci_enable_device before we request our IRQ (Tobias Ringstrom)
- - Add 3c590 PCI latency timer hack to vortex_probe1 (from 0.99Ra)
- - Added extended issue_and_wait for the 3c905CX.
- - Look for an MII on PHY index 24 first (3c905CX oddity).
- - Add HAS_NWAY to 3cSOHO100-TX (Brett Frankenberger)
- - Don't free skbs we don't own on oom path in vortex_open().
-
- LK1.1.13 27 Jan 2001
- - Added explicit `medialock' flag so we can truly
- lock the media type down with `options'.
- - "check ioremap return and some tidbits" (Arnaldo Carvalho de Melo <acme@conectiva.com.br>)
- - Added and used EEPROM_NORESET for 3c556B PM resumes.
- - Fixed leakage of vp->rx_ring.
- - Break out separate HAS_HWCKSM device capability flag.
- - Kill vp->tx_full (ANK)
- - Merge zerocopy fragment handling (ANK?)
-
- LK1.1.14 15 Feb 2001
- - Enable WOL. Can be turned on with `enable_wol' module option.
- - EISA and PCI initialisation fixes (jgarzik, Manfred Spraul)
- - If a device's internalconfig register reports it has NWAY,
- use it, even if autoselect is enabled.
-
- LK1.1.15 6 June 2001 akpm
- - Prevent double counting of received bytes (Lars Christensen)
- - Add ethtool support (jgarzik)
- - Add module parm descriptions (Andrzej M. Krzysztofowicz)
- - Implemented alloc_etherdev() API
- - Special-case the 'Tx error 82' message.
-
- LK1.1.16 18 July 2001 akpm
- - Make NETIF_F_SG dependent upon nr_free_highpages(), not on CONFIG_HIGHMEM
- - Lessen verbosity of bootup messages
- - Fix WOL - use new PM API functions.
- - Use netif_running() instead of vp->open in suspend/resume.
- - Don't reset the interface logic on open/close/rmmod. It upsets
- autonegotiation, and hence DHCP (from 0.99T).
- - Back out EEPROM_NORESET flag because of the above (we do it for all
- NICs).
- - Correct 3c982 identification string
- - Rename wait_for_completion() to issue_and_wait() to avoid completion.h
- clash.
-
- LK1.1.17 18Dec01 akpm
- - PCI ID 9805 is a Python-T, not a dual-port Cyclone. Apparently.
- And it has NWAY.
- - Mask our advertised modes (vp->advertising) with our capabilities
- (MII reg5) when deciding which duplex mode to use.
- - Add `global_options' as default for options[]. Ditto global_enable_wol,
- global_full_duplex.
-
- LK1.1.18 01Jul02 akpm
- - Fix for undocumented transceiver power-up bit on some 3c566B's
- (Donald Becker, Rahul Karnik)
-
- - See http://www.zip.com.au/~akpm/linux/#3c59x-2.3 for more details.
- - Also see Documentation/networking/vortex.txt
-
- LK1.1.19 10Nov02 Marc Zyngier <maz@wild-wind.fr.eu.org>
- - EISA sysfs integration.
*/
/*
#define DRV_NAME "3c59x"
-#define DRV_VERSION "LK1.1.19"
-#define DRV_RELDATE "10 Nov 2002"
static int vortex_debug = 1;
#endif
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/highmem.h>
#include <linux/eisa.h>
#include <linux/bitops.h>
+#include <linux/jiffies.h>
#include <asm/irq.h> /* For NR_IRQS only. */
#include <asm/io.h>
#include <asm/uaccess.h>
DRV_NAME ": Donald Becker and others. www.scyld.com/network/vortex.html\n";
MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
-MODULE_DESCRIPTION("3Com 3c59x/3c9xx ethernet driver "
- DRV_VERSION " " DRV_RELDATE);
+MODULE_DESCRIPTION("3Com 3c59x/3c9xx ethernet driver ");
MODULE_LICENSE("GPL");
-MODULE_VERSION(DRV_VERSION);
/* Operational parameter that usually are not changed. */
of the drivers, and will likely be provided by some future kernel.
*/
enum pci_flags_bit {
- PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4,
- PCI_ADDR0=0x10<<0, PCI_ADDR1=0x10<<1, PCI_ADDR2=0x10<<2, PCI_ADDR3=0x10<<3,
+ PCI_USES_MASTER=4,
};
enum { IS_VORTEX=1, IS_BOOMERANG=2, IS_CYCLONE=4, IS_TORNADO=8,
int io_size;
} vortex_info_tbl[] __devinitdata = {
{"3c590 Vortex 10Mbps",
- PCI_USES_IO|PCI_USES_MASTER, IS_VORTEX, 32, },
+ PCI_USES_MASTER, IS_VORTEX, 32, },
{"3c592 EISA 10Mbps Demon/Vortex", /* AKPM: from Don's 3c59x_cb.c 0.49H */
- PCI_USES_IO|PCI_USES_MASTER, IS_VORTEX, 32, },
+ PCI_USES_MASTER, IS_VORTEX, 32, },
{"3c597 EISA Fast Demon/Vortex", /* AKPM: from Don's 3c59x_cb.c 0.49H */
- PCI_USES_IO|PCI_USES_MASTER, IS_VORTEX, 32, },
+ PCI_USES_MASTER, IS_VORTEX, 32, },
{"3c595 Vortex 100baseTx",
- PCI_USES_IO|PCI_USES_MASTER, IS_VORTEX, 32, },
+ PCI_USES_MASTER, IS_VORTEX, 32, },
{"3c595 Vortex 100baseT4",
- PCI_USES_IO|PCI_USES_MASTER, IS_VORTEX, 32, },
+ PCI_USES_MASTER, IS_VORTEX, 32, },
{"3c595 Vortex 100base-MII",
- PCI_USES_IO|PCI_USES_MASTER, IS_VORTEX, 32, },
+ PCI_USES_MASTER, IS_VORTEX, 32, },
{"3c900 Boomerang 10baseT",
- PCI_USES_IO|PCI_USES_MASTER, IS_BOOMERANG|EEPROM_RESET, 64, },
+ PCI_USES_MASTER, IS_BOOMERANG|EEPROM_RESET, 64, },
{"3c900 Boomerang 10Mbps Combo",
- PCI_USES_IO|PCI_USES_MASTER, IS_BOOMERANG|EEPROM_RESET, 64, },
+ PCI_USES_MASTER, IS_BOOMERANG|EEPROM_RESET, 64, },
{"3c900 Cyclone 10Mbps TPO", /* AKPM: from Don's 0.99M */
- PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, },
+ PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, },
{"3c900 Cyclone 10Mbps Combo",
- PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, },
+ PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, },
{"3c900 Cyclone 10Mbps TPC", /* AKPM: from Don's 0.99M */
- PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, },
+ PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, },
{"3c900B-FL Cyclone 10base-FL",
- PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, },
+ PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, },
{"3c905 Boomerang 100baseTx",
- PCI_USES_IO|PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, },
+ PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, },
{"3c905 Boomerang 100baseT4",
- PCI_USES_IO|PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, },
+ PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, },
{"3c905B Cyclone 100baseTx",
- PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
+ PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
{"3c905B Cyclone 10/100/BNC",
- PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, },
+ PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, },
{"3c905B-FX Cyclone 100baseFx",
- PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, },
+ PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, },
{"3c905C Tornado",
- PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
+ PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
{"3c920B-EMB-WNM (ATI Radeon 9100 IGP)",
- PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_MII|HAS_HWCKSM, 128, },
+ PCI_USES_MASTER, IS_TORNADO|HAS_MII|HAS_HWCKSM, 128, },
{"3c980 Cyclone",
- PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, },
+ PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, },
{"3c980C Python-T",
- PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, },
+ PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, },
{"3cSOHO100-TX Hurricane",
- PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, },
+ PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, },
{"3c555 Laptop Hurricane",
- PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|EEPROM_8BIT|HAS_HWCKSM, 128, },
+ PCI_USES_MASTER, IS_CYCLONE|EEPROM_8BIT|HAS_HWCKSM, 128, },
{"3c556 Laptop Tornado",
- PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|EEPROM_8BIT|HAS_CB_FNS|INVERT_MII_PWR|
+ PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|EEPROM_8BIT|HAS_CB_FNS|INVERT_MII_PWR|
HAS_HWCKSM, 128, },
{"3c556B Laptop Hurricane",
- PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|EEPROM_OFFSET|HAS_CB_FNS|INVERT_MII_PWR|
+ PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|EEPROM_OFFSET|HAS_CB_FNS|INVERT_MII_PWR|
WNO_XCVR_PWR|HAS_HWCKSM, 128, },
{"3c575 [Megahertz] 10/100 LAN CardBus",
- PCI_USES_IO|PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_8BIT, 128, },
+ PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_8BIT, 128, },
{"3c575 Boomerang CardBus",
- PCI_USES_IO|PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_8BIT, 128, },
+ PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_8BIT, 128, },
{"3CCFE575BT Cyclone CardBus",
- PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|
+ PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|
INVERT_LED_PWR|HAS_HWCKSM, 128, },
{"3CCFE575CT Tornado CardBus",
- PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR|
+ PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR|
MAX_COLLISION_RESET|HAS_HWCKSM, 128, },
{"3CCFE656 Cyclone CardBus",
- PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR|
+ PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR|
INVERT_LED_PWR|HAS_HWCKSM, 128, },
{"3CCFEM656B Cyclone+Winmodem CardBus",
- PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR|
+ PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR|
INVERT_LED_PWR|HAS_HWCKSM, 128, },
{"3CXFEM656C Tornado+Winmodem CardBus", /* From pcmcia-cs-3.1.5 */
- PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR|
+ PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR|
MAX_COLLISION_RESET|HAS_HWCKSM, 128, },
{"3c450 HomePNA Tornado", /* AKPM: from Don's 0.99Q */
- PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, },
+ PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, },
{"3c920 Tornado",
- PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, },
+ PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, },
{"3c982 Hydra Dual Port A",
- PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_HWCKSM|HAS_NWAY, 128, },
+ PCI_USES_MASTER, IS_TORNADO|HAS_HWCKSM|HAS_NWAY, 128, },
{"3c982 Hydra Dual Port B",
- PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_HWCKSM|HAS_NWAY, 128, },
+ PCI_USES_MASTER, IS_TORNADO|HAS_HWCKSM|HAS_NWAY, 128, },
{"3c905B-T4",
- PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
+ PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
{"3c920B-EMB-WNM Tornado",
- PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, },
+ PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, },
{NULL,}, /* NULL terminated list. */
};
int options; /* User-settable misc. driver options. */
unsigned int media_override:4, /* Passed-in media type. */
default_media:4, /* Read from the EEPROM/Wn3_Config. */
- full_duplex:1, force_fd:1, autoselect:1,
+ full_duplex:1, autoselect:1,
bus_master:1, /* Vortex can only do a fragment bus-m. */
full_bus_master_tx:1, full_bus_master_rx:2, /* Boomerang */
flow_ctrl:1, /* Use 802.3x flow control (PAUSE only) */
XCVR_100baseFx, XCVR_MII=6, XCVR_NWAY=8, XCVR_ExtMII=9, XCVR_Default=10,
};
-static struct media_table {
+static const struct media_table {
char *name;
unsigned int media_bits:16, /* Bits to set in Wn4_Media register. */
mask:8, /* The transceiver-present bit in Wn3_Config.*/
static int boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev);
static int vortex_rx(struct net_device *dev);
static int boomerang_rx(struct net_device *dev);
-static irqreturn_t vortex_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-static irqreturn_t boomerang_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static irqreturn_t vortex_interrupt(int irq, void *dev_id);
+static irqreturn_t boomerang_interrupt(int irq, void *dev_id);
static int vortex_close(struct net_device *dev);
static void dump_tx_ring(struct net_device *dev);
static void update_stats(void __iomem *ioaddr, struct net_device *dev);
#endif
static void vortex_tx_timeout(struct net_device *dev);
static void acpi_set_WOL(struct net_device *dev);
-static struct ethtool_ops vortex_ethtool_ops;
+static const struct ethtool_ops vortex_ethtool_ops;
static void set_8021q_mode(struct net_device *dev, int enable);
-\f
/* This driver uses 'options' to pass the media type, full-duplex flag, etc. */
/* Option count limit only -- unlimited interfaces are supported. */
#define MAX_UNITS 8
static int global_enable_wol = -1;
static int global_use_mmio = -1;
-/* #define dev_alloc_skb dev_alloc_skb_debug */
-
/* Variables to work-around the Compaq PCI BIOS32 problem. */
static int compaq_ioaddr, compaq_irq, compaq_device_id = 0x5900;
static struct net_device *compaq_net_device;
unsigned long flags;
local_save_flags(flags);
local_irq_disable();
- (vp->full_bus_master_rx ? boomerang_interrupt:vortex_interrupt)(dev->irq,dev,NULL);
+ (vp->full_bus_master_rx ? boomerang_interrupt:vortex_interrupt)(dev->irq,dev);
local_irq_restore(flags);
-}
+}
#endif
#ifdef CONFIG_PM
-static int vortex_suspend (struct pci_dev *pdev, pm_message_t state)
+static int vortex_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct net_device *dev = pci_get_drvdata(pdev);
return 0;
}
-static int vortex_resume (struct pci_dev *pdev)
+static int vortex_resume(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct vortex_private *vp = netdev_priv(dev);
pci_enable_device(pdev);
pci_set_master(pdev);
if (request_irq(dev->irq, vp->full_bus_master_rx ?
- &boomerang_interrupt : &vortex_interrupt, SA_SHIRQ, dev->name, dev)) {
+ &boomerang_interrupt : &vortex_interrupt, IRQF_SHARED, dev->name, dev)) {
printk(KERN_WARNING "%s: Could not reserve IRQ %d\n", dev->name, dev->irq);
pci_disable_device(pdev);
return -EBUSY;
{ "TCM5970", CH_3C597 },
{ "" }
};
+MODULE_DEVICE_TABLE(eisa, vortex_eisa_ids);
-static int vortex_eisa_probe (struct device *device);
-static int vortex_eisa_remove (struct device *device);
+static int vortex_eisa_probe(struct device *device);
+static int vortex_eisa_remove(struct device *device);
static struct eisa_driver vortex_eisa_driver = {
.id_table = vortex_eisa_ids,
}
};
-static int vortex_eisa_probe (struct device *device)
+static int vortex_eisa_probe(struct device *device)
{
void __iomem *ioaddr;
struct eisa_device *edev;
- edev = to_eisa_device (device);
+ edev = to_eisa_device(device);
if (!request_region(edev->base_addr, VORTEX_TOTAL_SIZE, DRV_NAME))
return -EBUSY;
if (vortex_probe1(device, ioaddr, ioread16(ioaddr + 0xC88) >> 12,
edev->id.driver_data, vortex_cards_found)) {
- release_region (edev->base_addr, VORTEX_TOTAL_SIZE);
+ release_region(edev->base_addr, VORTEX_TOTAL_SIZE);
return -ENODEV;
}
return 0;
}
-static int vortex_eisa_remove (struct device *device)
+static int vortex_eisa_remove(struct device *device)
{
struct eisa_device *edev;
struct net_device *dev;
struct vortex_private *vp;
void __iomem *ioaddr;
- edev = to_eisa_device (device);
- dev = eisa_get_drvdata (edev);
+ edev = to_eisa_device(device);
+ dev = eisa_get_drvdata(edev);
if (!dev) {
printk("vortex_eisa_remove called for Compaq device!\n");
vp = netdev_priv(dev);
ioaddr = vp->ioaddr;
-
- unregister_netdev (dev);
- iowrite16 (TotalReset|0x14, ioaddr + EL3_CMD);
- release_region (dev->base_addr, VORTEX_TOTAL_SIZE);
- free_netdev (dev);
+ unregister_netdev(dev);
+ iowrite16(TotalReset|0x14, ioaddr + EL3_CMD);
+ release_region(dev->base_addr, VORTEX_TOTAL_SIZE);
+
+ free_netdev(dev);
return 0;
}
#endif
/* returns count found (>= 0), or negative on error */
-static int __init vortex_eisa_init (void)
+static int __init vortex_eisa_init(void)
{
int eisa_found = 0;
int orig_cards_found = vortex_cards_found;
#ifdef CONFIG_EISA
- if (eisa_driver_register (&vortex_eisa_driver) >= 0) {
- /* Because of the way EISA bus is probed, we cannot assume
- * any device have been found when we exit from
- * eisa_driver_register (the bus root driver may not be
- * initialized yet). So we blindly assume something was
- * found, and let the sysfs magic happend... */
-
- eisa_found = 1;
+ int err;
+
+ err = eisa_driver_register (&vortex_eisa_driver);
+ if (!err) {
+ /*
+ * Because of the way EISA bus is probed, we cannot assume
+ * any device have been found when we exit from
+ * eisa_driver_register (the bus root driver may not be
+ * initialized yet). So we blindly assume something was
+ * found, and let the sysfs magic happend...
+ */
+ eisa_found = 1;
}
#endif
-
+
/* Special code to work-around the Compaq PCI BIOS32 problem. */
if (compaq_ioaddr) {
vortex_probe1(NULL, ioport_map(compaq_ioaddr, VORTEX_TOTAL_SIZE),
}
/* returns count (>= 0), or negative on error */
-static int __devinit vortex_init_one (struct pci_dev *pdev,
+static int __devinit vortex_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
int rc, unit, pci_bar;
struct vortex_chip_info *vci;
void __iomem *ioaddr;
- /* wake up and enable device */
- rc = pci_enable_device (pdev);
+ /* wake up and enable device */
+ rc = pci_enable_device(pdev);
if (rc < 0)
goto out;
rc = vortex_probe1(&pdev->dev, ioaddr, pdev->irq,
ent->driver_data, unit);
if (rc < 0) {
- pci_disable_device (pdev);
+ pci_disable_device(pdev);
goto out;
}
if (print_info)
printk (KERN_INFO "See Documentation/networking/vortex.txt\n");
- printk(KERN_INFO "%s: 3Com %s %s at %p. Vers " DRV_VERSION "\n",
+ printk(KERN_INFO "%s: 3Com %s %s at %p.\n",
print_name,
pdev ? "PCI" : "EISA",
vci->name,
if (request_region(dev->base_addr, vci->io_size, print_name) != NULL)
vp->must_free_region = 1;
- /* enable bus-mastering if necessary */
+ /* enable bus-mastering if necessary */
if (vci->flags & PCI_USES_MASTER)
- pci_set_master (pdev);
+ pci_set_master(pdev);
if (vci->drv_flags & IS_VORTEX) {
u8 pci_latency;
vp->tx_ring_dma = vp->rx_ring_dma + sizeof(struct boom_rx_desc) * RX_RING_SIZE;
/* if we are a PCI driver, we store info in pdev->driver_data
- * instead of a module list */
+ * instead of a module list */
if (pdev)
pci_set_drvdata(pdev, dev);
if (edev)
- eisa_set_drvdata (edev, dev);
+ eisa_set_drvdata(edev, dev);
vp->media_override = 7;
if (option >= 0) {
vp->enable_wol = 1;
}
- vp->force_fd = vp->full_duplex;
+ vp->mii.force_media = vp->full_duplex;
vp->options = option;
/* Read the station address from the EEPROM. */
EL3WINDOW(0);
for (i = 0; i < 6; i++)
iowrite8(dev->dev_addr[i], ioaddr + i);
-#ifdef __sparc__
- if (print_info)
- printk(", IRQ %s\n", __irq_itoa(dev->irq));
-#else
if (print_info)
printk(", IRQ %d\n", dev->irq);
/* Tell them about an invalid IRQ. */
if (dev->irq <= 0 || dev->irq >= NR_IRQS)
printk(KERN_WARNING " *** Warning: IRQ %d is unlikely to work! ***\n",
dev->irq);
-#endif
EL3WINDOW(4);
step = (ioread8(ioaddr + Wn4_NetDiag) & 0x1e) >> 1;
}
if (print_info) {
- printk(KERN_INFO "%s: CardBus functions mapped %8.8lx->%p\n",
- print_name, pci_resource_start(pdev, 2),
+ printk(KERN_INFO "%s: CardBus functions mapped "
+ "%16.16llx->%p\n",
+ print_name,
+ (unsigned long long)pci_resource_start(pdev, 2),
vp->cb_fn_base);
}
EL3WINDOW(2);
}
{
- static const char * ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
+ static const char * const ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
unsigned int config;
EL3WINDOW(3);
vp->available_media = ioread16(ioaddr + Wn3_Options);
dev->tx_timeout = vortex_tx_timeout;
dev->watchdog_timeo = (watchdog * HZ) / 1000;
#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = poll_vortex;
+ dev->poll_controller = poll_vortex;
#endif
if (pdev) {
vp->pm_state_valid = 1;
dev->name, cmd, ioread16(ioaddr + EL3_STATUS));
}
+static void
+vortex_set_duplex(struct net_device *dev)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+ void __iomem *ioaddr = vp->ioaddr;
+
+ printk(KERN_INFO "%s: setting %s-duplex.\n",
+ dev->name, (vp->full_duplex) ? "full" : "half");
+
+ EL3WINDOW(3);
+ /* Set the full-duplex bit. */
+ iowrite16(((vp->info1 & 0x8000) || vp->full_duplex ? 0x20 : 0) |
+ (vp->large_frames ? 0x40 : 0) |
+ ((vp->full_duplex && vp->flow_ctrl && vp->partner_flow_ctrl) ?
+ 0x100 : 0),
+ ioaddr + Wn3_MAC_Ctrl);
+}
+
+static void vortex_check_media(struct net_device *dev, unsigned int init)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+ unsigned int ok_to_print = 0;
+
+ if (vortex_debug > 3)
+ ok_to_print = 1;
+
+ if (mii_check_media(&vp->mii, ok_to_print, init)) {
+ vp->full_duplex = vp->mii.full_duplex;
+ vortex_set_duplex(dev);
+ } else if (init) {
+ vortex_set_duplex(dev);
+ }
+}
+
static void
vortex_up(struct net_device *dev)
{
struct vortex_private *vp = netdev_priv(dev);
void __iomem *ioaddr = vp->ioaddr;
unsigned int config;
- int i;
+ int i, mii_reg1, mii_reg5;
if (VORTEX_PCI(vp)) {
pci_set_power_state(VORTEX_PCI(vp), PCI_D0); /* Go active */
printk(KERN_DEBUG "%s: Initial media type %s.\n",
dev->name, media_tbl[dev->if_port].name);
- vp->full_duplex = vp->force_fd;
+ vp->full_duplex = vp->mii.force_media;
config = BFINS(config, dev->if_port, 20, 4);
if (vortex_debug > 6)
printk(KERN_DEBUG "vortex_up(): writing 0x%x to InternalConfig\n", config);
iowrite32(config, ioaddr + Wn3_Config);
if (dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) {
- int mii_reg1, mii_reg5;
EL3WINDOW(4);
- /* Read BMSR (reg1) only to clear old status. */
mii_reg1 = mdio_read(dev, vp->phys[0], MII_BMSR);
mii_reg5 = mdio_read(dev, vp->phys[0], MII_LPA);
- if (mii_reg5 == 0xffff || mii_reg5 == 0x0000) {
- netif_carrier_off(dev); /* No MII device or no link partner report */
- } else {
- mii_reg5 &= vp->advertising;
- if ((mii_reg5 & 0x0100) != 0 /* 100baseTx-FD */
- || (mii_reg5 & 0x00C0) == 0x0040) /* 10T-FD, but not 100-HD */
- vp->full_duplex = 1;
- netif_carrier_on(dev);
- }
vp->partner_flow_ctrl = ((mii_reg5 & 0x0400) != 0);
- if (vortex_debug > 1)
- printk(KERN_INFO "%s: MII #%d status %4.4x, link partner capability %4.4x,"
- " info1 %04x, setting %s-duplex.\n",
- dev->name, vp->phys[0],
- mii_reg1, mii_reg5,
- vp->info1, ((vp->info1 & 0x8000) || vp->full_duplex) ? "full" : "half");
- EL3WINDOW(3);
- }
-
- /* Set the full-duplex bit. */
- iowrite16( ((vp->info1 & 0x8000) || vp->full_duplex ? 0x20 : 0) |
- (vp->large_frames ? 0x40 : 0) |
- ((vp->full_duplex && vp->flow_ctrl && vp->partner_flow_ctrl) ? 0x100 : 0),
- ioaddr + Wn3_MAC_Ctrl);
- if (vortex_debug > 1) {
- printk(KERN_DEBUG "%s: vortex_up() InternalConfig %8.8x.\n",
- dev->name, config);
+ vortex_check_media(dev, 1);
}
+ else
+ vortex_set_duplex(dev);
issue_and_wait(dev, TxReset);
/*
*/
issue_and_wait(dev, RxReset|0x04);
+
iowrite16(SetStatusEnb | 0x00, ioaddr + EL3_CMD);
if (vortex_debug > 1) {
set_8021q_mode(dev, 1);
iowrite16(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
-// issue_and_wait(dev, SetTxStart|0x07ff);
iowrite16(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
iowrite16(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
/* Allow status bits to be seen. */
/* Use the now-standard shared IRQ implementation. */
if ((retval = request_irq(dev->irq, vp->full_bus_master_rx ?
- &boomerang_interrupt : &vortex_interrupt, SA_SHIRQ, dev->name, dev))) {
+ &boomerang_interrupt : &vortex_interrupt, IRQF_SHARED, dev->name, dev))) {
printk(KERN_ERR "%s: Could not reserve IRQ %d\n", dev->name, dev->irq);
goto out;
}
void __iomem *ioaddr = vp->ioaddr;
int next_tick = 60*HZ;
int ok = 0;
- int media_status, mii_status, old_window;
+ int media_status, old_window;
if (vortex_debug > 2) {
printk(KERN_DEBUG "%s: Media selection timer tick happened, %s.\n",
printk(KERN_DEBUG "dev->watchdog_timeo=%d\n", dev->watchdog_timeo);
}
- if (vp->medialock)
- goto leave_media_alone;
- disable_irq(dev->irq);
+ disable_irq_lockdep(dev->irq);
old_window = ioread16(ioaddr + EL3_CMD) >> 13;
EL3WINDOW(4);
media_status = ioread16(ioaddr + Wn4_Media);
break;
case XCVR_MII: case XCVR_NWAY:
{
- spin_lock_bh(&vp->lock);
- mii_status = mdio_read(dev, vp->phys[0], MII_BMSR);
- if (!(mii_status & BMSR_LSTATUS)) {
- /* Re-read to get actual link status */
- mii_status = mdio_read(dev, vp->phys[0], MII_BMSR);
- }
ok = 1;
- if (vortex_debug > 2)
- printk(KERN_DEBUG "%s: MII transceiver has status %4.4x.\n",
- dev->name, mii_status);
- if (mii_status & BMSR_LSTATUS) {
- int mii_reg5 = mdio_read(dev, vp->phys[0], MII_LPA);
- if (! vp->force_fd && mii_reg5 != 0xffff) {
- int duplex;
-
- mii_reg5 &= vp->advertising;
- duplex = (mii_reg5&0x0100) || (mii_reg5 & 0x01C0) == 0x0040;
- if (vp->full_duplex != duplex) {
- vp->full_duplex = duplex;
- printk(KERN_INFO "%s: Setting %s-duplex based on MII "
- "#%d link partner capability of %4.4x.\n",
- dev->name, vp->full_duplex ? "full" : "half",
- vp->phys[0], mii_reg5);
- /* Set the full-duplex bit. */
- EL3WINDOW(3);
- iowrite16( (vp->full_duplex ? 0x20 : 0) |
- (vp->large_frames ? 0x40 : 0) |
- ((vp->full_duplex && vp->flow_ctrl && vp->partner_flow_ctrl) ? 0x100 : 0),
- ioaddr + Wn3_MAC_Ctrl);
- if (vortex_debug > 1)
- printk(KERN_DEBUG "Setting duplex in Wn3_MAC_Ctrl\n");
- /* AKPM: bug: should reset Tx and Rx after setting Duplex. Page 180 */
- }
- }
- netif_carrier_on(dev);
- } else {
- netif_carrier_off(dev);
- }
+ spin_lock_bh(&vp->lock);
+ vortex_check_media(dev, 0);
spin_unlock_bh(&vp->lock);
}
break;
dev->name, media_tbl[dev->if_port].name, media_status);
ok = 1;
}
- if ( ! ok) {
+
+ if (!netif_carrier_ok(dev))
+ next_tick = 5*HZ;
+
+ if (vp->medialock)
+ goto leave_media_alone;
+
+ if (!ok) {
unsigned int config;
do {
printk(KERN_DEBUG "wrote 0x%08x to Wn3_Config\n", config);
/* AKPM: FIXME: Should reset Rx & Tx here. P60 of 3c90xc.pdf */
}
- EL3WINDOW(old_window);
- enable_irq(dev->irq);
leave_media_alone:
if (vortex_debug > 2)
printk(KERN_DEBUG "%s: Media selection timer finished, %s.\n",
dev->name, media_tbl[dev->if_port].name);
+ EL3WINDOW(old_window);
+ enable_irq_lockdep(dev->irq);
mod_timer(&vp->timer, RUN_AT(next_tick));
if (vp->deferred)
iowrite16(FakeIntr, ioaddr + EL3_CMD);
unsigned long flags;
local_irq_save(flags);
if (vp->full_bus_master_tx)
- boomerang_interrupt(dev->irq, dev, NULL);
+ boomerang_interrupt(dev->irq, dev);
else
- vortex_interrupt(dev->irq, dev, NULL);
+ vortex_interrupt(dev->irq, dev);
local_irq_restore(flags);
}
}
vp->stats.tx_dropped++;
netif_wake_queue(dev);
}
-
+
/* Issue Tx Enable */
iowrite16(TxEnable, ioaddr + EL3_CMD);
dev->trans_start = jiffies;
-
+
/* Switch to register set 7 for normal use. */
EL3WINDOW(7);
}
}
if (tx_status & 0x14) vp->stats.tx_fifo_errors++;
if (tx_status & 0x38) vp->stats.tx_aborted_errors++;
+ if (tx_status & 0x08) vp->xstats.tx_max_collisions++;
iowrite8(0, ioaddr + TxStatus);
if (tx_status & 0x30) { /* txJabber or txUnderrun */
do_tx_reset = 1;
- } else if (tx_status & 0x08) { /* maxCollisions */
- vp->xstats.tx_max_collisions++;
- if (vp->drv_flags & MAX_COLLISION_RESET) {
- do_tx_reset = 1;
- reset_mask = 0x0108; /* Reset interface logic, but not download logic */
- }
- } else { /* Merely re-enable the transmitter. */
+ } else if ((tx_status & 0x08) && (vp->drv_flags & MAX_COLLISION_RESET)) { /* maxCollisions */
+ do_tx_reset = 1;
+ reset_mask = 0x0108; /* Reset interface logic, but not download logic */
+ } else { /* Merely re-enable the transmitter. */
iowrite16(TxEnable, ioaddr + EL3_CMD);
}
}
if (vp->bus_master) {
/* Set the bus-master controller to transfer the packet. */
int len = (skb->len + 3) & ~3;
- iowrite32( vp->tx_skb_dma = pci_map_single(VORTEX_PCI(vp), skb->data, len, PCI_DMA_TODEVICE),
+ iowrite32(vp->tx_skb_dma = pci_map_single(VORTEX_PCI(vp), skb->data, len, PCI_DMA_TODEVICE),
ioaddr + Wn7_MasterAddr);
iowrite16(len, ioaddr + Wn7_MasterLen);
vp->tx_skb = skb;
vp->tx_ring[entry].next = 0;
#if DO_ZEROCOPY
- if (skb->ip_summed != CHECKSUM_HW)
+ if (skb->ip_summed != CHECKSUM_PARTIAL)
vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded);
else
vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded | AddTCPChksum | AddUDPChksum);
*/
static irqreturn_t
-vortex_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+vortex_interrupt(int irq, void *dev_id)
{
struct net_device *dev = dev_id;
struct vortex_private *vp = netdev_priv(dev);
*/
static irqreturn_t
-boomerang_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+boomerang_interrupt(int irq, void *dev_id)
{
struct net_device *dev = dev_id;
struct vortex_private *vp = netdev_priv(dev);
if ((vp->tx_ring[entry].status & DN_COMPLETE) == 0)
break; /* It still hasn't been processed. */
#endif
-
+
if (vp->tx_skbuff[entry]) {
struct sk_buff *skb = vp->tx_skbuff[entry];
-#if DO_ZEROCOPY
+#if DO_ZEROCOPY
int i;
for (i=0; i<=skb_shinfo(skb)->nr_frags; i++)
pci_unmap_single(VORTEX_PCI(vp),
skb = dev_alloc_skb(PKT_BUF_SZ);
if (skb == NULL) {
static unsigned long last_jif;
- if ((jiffies - last_jif) > 10 * HZ) {
+ if (time_after(jiffies, last_jif + 10 * HZ)) {
printk(KERN_WARNING "%s: memory shortage\n", dev->name);
last_jif = jiffies;
}
"not using them!\n", dev->name);
}
#endif
-
+
free_irq(dev->irq, dev);
if (vp->full_bus_master_rx) { /* Free Boomerang bus master Rx buffers. */
if (vortex_debug > 0) {
struct vortex_private *vp = netdev_priv(dev);
void __iomem *ioaddr = vp->ioaddr;
-
+
if (vp->full_bus_master_tx) {
int i;
int stalled = ioread32(ioaddr + PktStatus) & 0x04; /* Possible racy. But it's only debug stuff */
return rc;
}
-static u32 vortex_get_link(struct net_device *dev)
-{
- struct vortex_private *vp = netdev_priv(dev);
- void __iomem *ioaddr = vp->ioaddr;
- unsigned long flags;
- int rc;
-
- spin_lock_irqsave(&vp->lock, flags);
- EL3WINDOW(4);
- rc = mii_link_ok(&vp->mii);
- spin_unlock_irqrestore(&vp->lock, flags);
- return rc;
-}
-
static int vortex_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct vortex_private *vp = netdev_priv(dev);
struct vortex_private *vp = netdev_priv(dev);
strcpy(info->driver, DRV_NAME);
- strcpy(info->version, DRV_VERSION);
if (VORTEX_PCI(vp)) {
strcpy(info->bus_info, pci_name(VORTEX_PCI(vp)));
} else {
}
}
-static struct ethtool_ops vortex_ethtool_ops = {
+static const struct ethtool_ops vortex_ethtool_ops = {
.get_drvinfo = vortex_get_drvinfo,
.get_strings = vortex_get_strings,
.get_msglevel = vortex_get_msglevel,
.get_stats_count = vortex_get_stats_count,
.get_settings = vortex_get_settings,
.set_settings = vortex_set_settings,
- .get_link = vortex_get_link,
+ .get_link = ethtool_op_get_link,
.nway_reset = vortex_nway_reset,
- .get_perm_addr = ethtool_op_get_perm_addr,
+ .get_perm_addr = ethtool_op_get_perm_addr,
};
#ifdef CONFIG_PCI
int new_mode;
if (dev->flags & IFF_PROMISC) {
- if (vortex_debug > 0)
+ if (vortex_debug > 3)
printk(KERN_NOTICE "%s: Setting promiscuous mode.\n", dev->name);
new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast|RxProm;
} else if ((dev->mc_list) || (dev->flags & IFF_ALLMULTI)) {
}
return;
}
-\f
+
/* ACPI: Advanced Configuration and Power Interface. */
/* Set Wake-On-LAN mode and put the board into D3 (power-down) state. */
static void acpi_set_WOL(struct net_device *dev)
}
-static void __devexit vortex_remove_one (struct pci_dev *pdev)
+static void __devexit vortex_remove_one(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct vortex_private *vp;
static int vortex_have_eisa;
-static int __init vortex_init (void)
+static int __init vortex_init(void)
{
int pci_rc, eisa_rc;
- pci_rc = pci_module_init(&vortex_driver);
+ pci_rc = pci_register_driver(&vortex_driver);
eisa_rc = vortex_eisa_init();
if (pci_rc == 0)
}
-static void __exit vortex_eisa_cleanup (void)
+static void __exit vortex_eisa_cleanup(void)
{
struct vortex_private *vp;
void __iomem *ioaddr;
#ifdef CONFIG_EISA
/* Take care of the EISA devices */
- eisa_driver_unregister (&vortex_eisa_driver);
+ eisa_driver_unregister(&vortex_eisa_driver);
#endif
-
+
if (compaq_net_device) {
vp = compaq_net_device->priv;
ioaddr = ioport_map(compaq_net_device->base_addr,
VORTEX_TOTAL_SIZE);
- unregister_netdev (compaq_net_device);
- iowrite16 (TotalReset, ioaddr + EL3_CMD);
+ unregister_netdev(compaq_net_device);
+ iowrite16(TotalReset, ioaddr + EL3_CMD);
release_region(compaq_net_device->base_addr,
VORTEX_TOTAL_SIZE);
- free_netdev (compaq_net_device);
+ free_netdev(compaq_net_device);
}
}
-static void __exit vortex_cleanup (void)
+static void __exit vortex_cleanup(void)
{
if (vortex_have_pci)
- pci_unregister_driver (&vortex_driver);
+ pci_unregister_driver(&vortex_driver);
if (vortex_have_eisa)
- vortex_eisa_cleanup ();
+ vortex_eisa_cleanup();
}
module_init(vortex_init);
module_exit(vortex_cleanup);
-
-\f
-/*
- * Local variables:
- * c-indent-level: 4
- * c-basic-offset: 4
- * tab-width: 4
- * End:
- */
git://git.onelab.eu / linux-2.6.git / blobdiff