* Copyright (c) 2001-2005 Greg Ungerer (gerg@snapgear.com)
*
* Bug fixes and cleanup by Philippe De Muyter (phdm@macqel.be)
- * Copyright (c) 2004-2005 Macq Electronique SA.
+ * Copyright (c) 2004-2006 Macq Electronique SA.
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || \
defined(CONFIG_M5272) || defined(CONFIG_M528x) || \
- defined(CONFIG_M520x)
+ defined(CONFIG_M520x) || defined(CONFIG_M532x)
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include "fec.h"
(MCF_MBAR + 0x1000),
#elif defined(CONFIG_M520x)
(MCF_MBAR+0x30000),
+#elif defined(CONFIG_M532x)
+ (MCF_MBAR+0xfc030000),
#else
&(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec),
#endif
#define TX_RING_MOD_MASK 15 /* for this to work */
#if (((RX_RING_SIZE + TX_RING_SIZE) * 8) > PAGE_SIZE)
-#error "FEC: descriptor ring size contants too large"
+#error "FEC: descriptor ring size constants too large"
#endif
/* Interrupt events/masks.
/*
- * The 5270/5271/5280/5282 RX control register also contains maximum frame
+ * The 5270/5271/5280/5282/532x RX control register also contains maximum frame
* size bits. Other FEC hardware does not, so we need to take that into
* account when setting it.
*/
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
- defined(CONFIG_M520x)
+ defined(CONFIG_M520x) || defined(CONFIG_M532x)
#define OPT_FRAME_SIZE (PKT_MAXBUF_SIZE << 16)
#else
#define OPT_FRAME_SIZE 0
static int fec_enet_open(struct net_device *dev);
static int fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev);
static void fec_enet_mii(struct net_device *dev);
-static irqreturn_t fec_enet_interrupt(int irq, void * dev_id, struct pt_regs * regs);
+static irqreturn_t fec_enet_interrupt(int irq, void * dev_id);
static void fec_enet_tx(struct net_device *dev);
static void fec_enet_rx(struct net_device *dev);
static int fec_enet_close(struct net_device *dev);
static mii_list_t *mii_head;
static mii_list_t *mii_tail;
-static int mii_queue(struct net_device *dev, int request,
+static int mii_queue(struct net_device *dev, int request,
void (*func)(uint, struct net_device *));
/* Make MII read/write commands for the FEC.
#define MII_REG_SR 1 /* Status Register */
#define MII_REG_PHYIR1 2 /* PHY Identification Register 1 */
#define MII_REG_PHYIR2 3 /* PHY Identification Register 2 */
-#define MII_REG_ANAR 4 /* A-N Advertisement Register */
+#define MII_REG_ANAR 4 /* A-N Advertisement Register */
#define MII_REG_ANLPAR 5 /* A-N Link Partner Ability Register */
#define MII_REG_ANER 6 /* A-N Expansion Register */
#define MII_REG_ANNPTR 7 /* A-N Next Page Transmit Register */
#define PHY_CONF_LOOP 0x0002 /* 1 loopback mode enabled */
#define PHY_CONF_SPMASK 0x00f0 /* mask for speed */
#define PHY_CONF_10HDX 0x0010 /* 10 Mbit half duplex supported */
-#define PHY_CONF_10FDX 0x0020 /* 10 Mbit full duplex supported */
+#define PHY_CONF_10FDX 0x0020 /* 10 Mbit full duplex supported */
#define PHY_CONF_100HDX 0x0040 /* 100 Mbit half duplex supported */
-#define PHY_CONF_100FDX 0x0080 /* 100 Mbit full duplex supported */
+#define PHY_CONF_100FDX 0x0080 /* 100 Mbit full duplex supported */
#define PHY_STAT_LINK 0x0100 /* 1 up - 0 down */
#define PHY_STAT_FAULT 0x0200 /* 1 remote fault */
#define PHY_STAT_ANC 0x0400 /* 1 auto-negotiation complete */
#define PHY_STAT_SPMASK 0xf000 /* mask for speed */
#define PHY_STAT_10HDX 0x1000 /* 10 Mbit half duplex selected */
-#define PHY_STAT_10FDX 0x2000 /* 10 Mbit full duplex selected */
+#define PHY_STAT_10FDX 0x2000 /* 10 Mbit full duplex selected */
#define PHY_STAT_100HDX 0x4000 /* 100 Mbit half duplex selected */
-#define PHY_STAT_100FDX 0x8000 /* 100 Mbit full duplex selected */
+#define PHY_STAT_100FDX 0x8000 /* 100 Mbit full duplex selected */
static int
struct fec_enet_private *fep;
volatile fec_t *fecp;
volatile cbd_t *bdp;
+ unsigned short status;
fep = netdev_priv(dev);
fecp = (volatile fec_t*)dev->base_addr;
/* Fill in a Tx ring entry */
bdp = fep->cur_tx;
+ status = bdp->cbd_sc;
#ifndef final_version
- if (bdp->cbd_sc & BD_ENET_TX_READY) {
+ if (status & BD_ENET_TX_READY) {
/* Ooops. All transmit buffers are full. Bail out.
* This should not happen, since dev->tbusy should be set.
*/
/* Clear all of the status flags.
*/
- bdp->cbd_sc &= ~BD_ENET_TX_STATS;
+ status &= ~BD_ENET_TX_STATS;
/* Set buffer length and buffer pointer.
*/
fep->stats.tx_bytes += skb->len;
fep->skb_cur = (fep->skb_cur+1) & TX_RING_MOD_MASK;
-
+
/* Push the data cache so the CPM does not get stale memory
* data.
*/
spin_lock_irq(&fep->lock);
- /* Send it on its way. Tell FEC its ready, interrupt when done,
- * its the last BD of the frame, and to put the CRC on the end.
+ /* Send it on its way. Tell FEC it's ready, interrupt when done,
+ * it's the last BD of the frame, and to put the CRC on the end.
*/
- bdp->cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_INTR
+ status |= (BD_ENET_TX_READY | BD_ENET_TX_INTR
| BD_ENET_TX_LAST | BD_ENET_TX_TC);
+ bdp->cbd_sc = status;
dev->trans_start = jiffies;
/* Trigger transmission start */
- fecp->fec_x_des_active = 0x01000000;
+ fecp->fec_x_des_active = 0;
/* If this was the last BD in the ring, start at the beginning again.
*/
- if (bdp->cbd_sc & BD_ENET_TX_WRAP) {
+ if (status & BD_ENET_TX_WRAP) {
bdp = fep->tx_bd_base;
} else {
bdp++;
bdp = fep->tx_bd_base;
printk(" tx: %u buffers\n", TX_RING_SIZE);
for (i = 0 ; i < TX_RING_SIZE; i++) {
- printk(" %08x: %04x %04x %08x\n",
+ printk(" %08x: %04x %04x %08x\n",
(uint) bdp,
bdp->cbd_sc,
bdp->cbd_datlen,
* This is called from the MPC core interrupt.
*/
static irqreturn_t
-fec_enet_interrupt(int irq, void * dev_id, struct pt_regs * regs)
+fec_enet_interrupt(int irq, void * dev_id)
{
struct net_device *dev = dev_id;
volatile fec_t *fecp;
handled = 1;
fec_enet_mii(dev);
}
-
+
}
return IRQ_RETVAL(handled);
}
{
struct fec_enet_private *fep;
volatile cbd_t *bdp;
+ unsigned short status;
struct sk_buff *skb;
fep = netdev_priv(dev);
spin_lock(&fep->lock);
bdp = fep->dirty_tx;
- while ((bdp->cbd_sc&BD_ENET_TX_READY) == 0) {
+ while (((status = bdp->cbd_sc) & BD_ENET_TX_READY) == 0) {
if (bdp == fep->cur_tx && fep->tx_full == 0) break;
skb = fep->tx_skbuff[fep->skb_dirty];
/* Check for errors. */
- if (bdp->cbd_sc & (BD_ENET_TX_HB | BD_ENET_TX_LC |
+ if (status & (BD_ENET_TX_HB | BD_ENET_TX_LC |
BD_ENET_TX_RL | BD_ENET_TX_UN |
BD_ENET_TX_CSL)) {
fep->stats.tx_errors++;
- if (bdp->cbd_sc & BD_ENET_TX_HB) /* No heartbeat */
+ if (status & BD_ENET_TX_HB) /* No heartbeat */
fep->stats.tx_heartbeat_errors++;
- if (bdp->cbd_sc & BD_ENET_TX_LC) /* Late collision */
+ if (status & BD_ENET_TX_LC) /* Late collision */
fep->stats.tx_window_errors++;
- if (bdp->cbd_sc & BD_ENET_TX_RL) /* Retrans limit */
+ if (status & BD_ENET_TX_RL) /* Retrans limit */
fep->stats.tx_aborted_errors++;
- if (bdp->cbd_sc & BD_ENET_TX_UN) /* Underrun */
+ if (status & BD_ENET_TX_UN) /* Underrun */
fep->stats.tx_fifo_errors++;
- if (bdp->cbd_sc & BD_ENET_TX_CSL) /* Carrier lost */
+ if (status & BD_ENET_TX_CSL) /* Carrier lost */
fep->stats.tx_carrier_errors++;
} else {
fep->stats.tx_packets++;
}
#ifndef final_version
- if (bdp->cbd_sc & BD_ENET_TX_READY)
+ if (status & BD_ENET_TX_READY)
printk("HEY! Enet xmit interrupt and TX_READY.\n");
#endif
/* Deferred means some collisions occurred during transmit,
* but we eventually sent the packet OK.
*/
- if (bdp->cbd_sc & BD_ENET_TX_DEF)
+ if (status & BD_ENET_TX_DEF)
fep->stats.collisions++;
-
+
/* Free the sk buffer associated with this last transmit.
*/
dev_kfree_skb_any(skb);
fep->tx_skbuff[fep->skb_dirty] = NULL;
fep->skb_dirty = (fep->skb_dirty + 1) & TX_RING_MOD_MASK;
-
+
/* Update pointer to next buffer descriptor to be transmitted.
*/
- if (bdp->cbd_sc & BD_ENET_TX_WRAP)
+ if (status & BD_ENET_TX_WRAP)
bdp = fep->tx_bd_base;
else
bdp++;
-
+
/* Since we have freed up a buffer, the ring is no longer
* full.
*/
struct fec_enet_private *fep;
volatile fec_t *fecp;
volatile cbd_t *bdp;
+ unsigned short status;
struct sk_buff *skb;
ushort pkt_len;
__u8 *data;
+#ifdef CONFIG_M532x
+ flush_cache_all();
+#endif
+
fep = netdev_priv(dev);
fecp = (volatile fec_t*)dev->base_addr;
*/
bdp = fep->cur_rx;
-while (!(bdp->cbd_sc & BD_ENET_RX_EMPTY)) {
+while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) {
#ifndef final_version
/* Since we have allocated space to hold a complete frame,
* the last indicator should be set.
*/
- if ((bdp->cbd_sc & BD_ENET_RX_LAST) == 0)
+ if ((status & BD_ENET_RX_LAST) == 0)
printk("FEC ENET: rcv is not +last\n");
#endif
goto rx_processing_done;
/* Check for errors. */
- if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO |
+ if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO |
BD_ENET_RX_CR | BD_ENET_RX_OV)) {
- fep->stats.rx_errors++;
- if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH)) {
+ fep->stats.rx_errors++;
+ if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH)) {
/* Frame too long or too short. */
fep->stats.rx_length_errors++;
}
- if (bdp->cbd_sc & BD_ENET_RX_NO) /* Frame alignment */
+ if (status & BD_ENET_RX_NO) /* Frame alignment */
fep->stats.rx_frame_errors++;
- if (bdp->cbd_sc & BD_ENET_RX_CR) /* CRC Error */
- fep->stats.rx_crc_errors++;
- if (bdp->cbd_sc & BD_ENET_RX_OV) /* FIFO overrun */
+ if (status & BD_ENET_RX_CR) /* CRC Error */
fep->stats.rx_crc_errors++;
+ if (status & BD_ENET_RX_OV) /* FIFO overrun */
+ fep->stats.rx_fifo_errors++;
}
/* Report late collisions as a frame error.
* On this error, the BD is closed, but we don't know what we
* have in the buffer. So, just drop this frame on the floor.
*/
- if (bdp->cbd_sc & BD_ENET_RX_CL) {
+ if (status & BD_ENET_RX_CL) {
fep->stats.rx_errors++;
fep->stats.rx_frame_errors++;
goto rx_processing_done;
} else {
skb->dev = dev;
skb_put(skb,pkt_len-4); /* Make room */
- eth_copy_and_sum(skb,
- (unsigned char *)__va(bdp->cbd_bufaddr),
- pkt_len-4, 0);
+ eth_copy_and_sum(skb, data, pkt_len-4, 0);
skb->protocol=eth_type_trans(skb,dev);
netif_rx(skb);
}
/* Clear the status flags for this buffer.
*/
- bdp->cbd_sc &= ~BD_ENET_RX_STATS;
+ status &= ~BD_ENET_RX_STATS;
/* Mark the buffer empty.
*/
- bdp->cbd_sc |= BD_ENET_RX_EMPTY;
+ status |= BD_ENET_RX_EMPTY;
+ bdp->cbd_sc = status;
/* Update BD pointer to next entry.
*/
- if (bdp->cbd_sc & BD_ENET_RX_WRAP)
+ if (status & BD_ENET_RX_WRAP)
bdp = fep->rx_bd_base;
else
bdp++;
-
+
#if 1
/* Doing this here will keep the FEC running while we process
* incoming frames. On a heavily loaded network, we should be
* able to keep up at the expense of system resources.
*/
- fecp->fec_r_des_active = 0x01000000;
+ fecp->fec_r_des_active = 0;
#endif
- } /* while (!(bdp->cbd_sc & BD_ENET_RX_EMPTY)) */
+ } /* while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) */
fep->cur_rx = (cbd_t *)bdp;
#if 0
* our way back to the interrupt return only to come right back
* here.
*/
- fecp->fec_r_des_active = 0x01000000;
+ fecp->fec_r_des_active = 0;
#endif
}
+/* called from interrupt context */
static void
fec_enet_mii(struct net_device *dev)
{
fep = netdev_priv(dev);
ep = fep->hwp;
mii_reg = ep->fec_mii_data;
-
+
+ spin_lock(&fep->lock);
+
if ((mip = mii_head) == NULL) {
printk("MII and no head!\n");
- return;
+ goto unlock;
}
if (mip->mii_func != NULL)
if ((mip = mii_head) != NULL)
ep->fec_mii_data = mip->mii_regval;
+
+unlock:
+ spin_unlock(&fep->lock);
}
static int
retval = 0;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&fep->lock,flags);
if ((mip = mii_free) != NULL) {
mii_free = mip->mii_next;
retval = 1;
}
- restore_flags(flags);
+ spin_unlock_irqrestore(&fep->lock,flags);
return(retval);
}
{ mk_mii_end, }
};
static phy_info_t const phy_info_lxt970 = {
- .id = 0x07810000,
+ .id = 0x07810000,
.name = "LXT970",
.config = phy_cmd_lxt970_config,
.startup = phy_cmd_lxt970_startup,
.ack_int = phy_cmd_lxt970_ack_int,
.shutdown = phy_cmd_lxt970_shutdown
};
-
+
/* ------------------------------------------------------------------------- */
/* The Level one LXT971 is used on some of my custom boards */
#define MII_LXT971_LCR 20 /* LED Control Register */
#define MII_LXT971_TCR 30 /* Transmit Control Register */
-/*
+/*
* I had some nice ideas of running the MDIO faster...
* The 971 should support 8MHz and I tried it, but things acted really
* weird, so 2.5 MHz ought to be enough for anyone...
*s = status;
}
-
+
static phy_cmd_t const phy_cmd_lxt971_config[] = {
- /* limit to 10MBit because my prototype board
+ /* limit to 10MBit because my prototype board
* doesn't work with 100. */
{ mk_mii_read(MII_REG_CR), mii_parse_cr },
{ mk_mii_read(MII_REG_ANAR), mii_parse_anar },
/* Somehow does the 971 tell me that the link is down
* the first read after power-up.
* read here to get a valid value in ack_int */
- { mk_mii_read(MII_REG_SR), mii_parse_sr },
+ { mk_mii_read(MII_REG_SR), mii_parse_sr },
{ mk_mii_end, }
};
static phy_cmd_t const phy_cmd_lxt971_ack_int[] = {
{ mk_mii_end, }
};
static phy_info_t const phy_info_lxt971 = {
- .id = 0x0001378e,
+ .id = 0x0001378e,
.name = "LXT971",
.config = phy_cmd_lxt971_config,
.startup = phy_cmd_lxt971_startup,
}
static phy_cmd_t const phy_cmd_qs6612_config[] = {
- /* The PHY powers up isolated on the RPX,
+ /* The PHY powers up isolated on the RPX,
* so send a command to allow operation.
*/
{ mk_mii_write(MII_QS6612_PCR, 0x0dc0), NULL },
{ mk_mii_end, }
};
static phy_info_t const phy_info_qs6612 = {
- .id = 0x00181440,
+ .id = 0x00181440,
.name = "QS6612",
.config = phy_cmd_qs6612_config,
.startup = phy_cmd_qs6612_startup,
static phy_cmd_t const phy_cmd_am79c874_startup[] = { /* enable interrupts */
{ mk_mii_write(MII_AM79C874_ICSR, 0xff00), NULL },
{ mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
- { mk_mii_read(MII_REG_SR), mii_parse_sr },
+ { mk_mii_read(MII_REG_SR), mii_parse_sr },
{ mk_mii_end, }
};
static phy_cmd_t const phy_cmd_am79c874_ack_int[] = {
static phy_cmd_t const phy_cmd_ks8721bl_startup[] = { /* enable interrupts */
{ mk_mii_write(MII_KS8721BL_ICSR, 0xff00), NULL },
{ mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
- { mk_mii_read(MII_REG_SR), mii_parse_sr },
+ { mk_mii_read(MII_REG_SR), mii_parse_sr },
{ mk_mii_end, }
};
static phy_cmd_t const phy_cmd_ks8721bl_ack_int[] = {
{ mk_mii_end, }
};
static phy_info_t const phy_info_ks8721bl = {
- .id = 0x00022161,
+ .id = 0x00022161,
.name = "KS8721BL",
.config = phy_cmd_ks8721bl_config,
.startup = phy_cmd_ks8721bl_startup,
};
/* ------------------------------------------------------------------------- */
-
+#if !defined(CONFIG_M532x)
#ifdef CONFIG_RPXCLASSIC
static void
mii_link_interrupt(void *dev_id);
#else
static irqreturn_t
-mii_link_interrupt(int irq, void * dev_id, struct pt_regs * regs);
+mii_link_interrupt(int irq, void * dev_id);
+#endif
#endif
#if defined(CONFIG_M5272)
static const struct idesc {
char *name;
unsigned short irq;
- irqreturn_t (*handler)(int, void *, struct pt_regs *);
+ irq_handler_t handler;
} *idp, id[] = {
{ "fec(RX)", 86, fec_enet_interrupt },
{ "fec(TX)", 87, fec_enet_interrupt },
{
volatile unsigned char *icrp;
volatile unsigned long *imrp;
- int i;
+ int i, ilip;
b = (fep->index) ? MCFICM_INTC1 : MCFICM_INTC0;
icrp = (volatile unsigned char *) (MCF_IPSBAR + b +
MCFINTC_ICR0);
- for (i = 23; (i < 36); i++)
- icrp[i] = 0x23;
+ for (i = 23, ilip = 0x28; (i < 36); i++)
+ icrp[i] = ilip--;
imrp = (volatile unsigned long *) (MCF_IPSBAR + b +
MCFINTC_IMRH);
{
volatile u16 *gpio_paspar;
volatile u8 *gpio_pehlpar;
-
+
gpio_paspar = (volatile u16 *) (MCF_IPSBAR + 0x100056);
gpio_pehlpar = (volatile u16 *) (MCF_IPSBAR + 0x100058);
*gpio_paspar |= 0x0f00;
/* ------------------------------------------------------------------------- */
+#elif defined(CONFIG_M532x)
+/*
+ * Code specific for M532x
+ */
+static void __inline__ fec_request_intrs(struct net_device *dev)
+{
+ struct fec_enet_private *fep;
+ int b;
+ static const struct idesc {
+ char *name;
+ unsigned short irq;
+ } *idp, id[] = {
+ { "fec(TXF)", 36 },
+ { "fec(TXB)", 37 },
+ { "fec(TXFIFO)", 38 },
+ { "fec(TXCR)", 39 },
+ { "fec(RXF)", 40 },
+ { "fec(RXB)", 41 },
+ { "fec(MII)", 42 },
+ { "fec(LC)", 43 },
+ { "fec(HBERR)", 44 },
+ { "fec(GRA)", 45 },
+ { "fec(EBERR)", 46 },
+ { "fec(BABT)", 47 },
+ { "fec(BABR)", 48 },
+ { NULL },
+ };
+
+ fep = netdev_priv(dev);
+ b = (fep->index) ? 128 : 64;
+
+ /* Setup interrupt handlers. */
+ for (idp = id; idp->name; idp++) {
+ if (request_irq(b+idp->irq,fec_enet_interrupt,0,idp->name,dev)!=0)
+ printk("FEC: Could not allocate %s IRQ(%d)!\n",
+ idp->name, b+idp->irq);
+ }
+
+ /* Unmask interrupts */
+ MCF_INTC0_ICR36 = 0x2;
+ MCF_INTC0_ICR37 = 0x2;
+ MCF_INTC0_ICR38 = 0x2;
+ MCF_INTC0_ICR39 = 0x2;
+ MCF_INTC0_ICR40 = 0x2;
+ MCF_INTC0_ICR41 = 0x2;
+ MCF_INTC0_ICR42 = 0x2;
+ MCF_INTC0_ICR43 = 0x2;
+ MCF_INTC0_ICR44 = 0x2;
+ MCF_INTC0_ICR45 = 0x2;
+ MCF_INTC0_ICR46 = 0x2;
+ MCF_INTC0_ICR47 = 0x2;
+ MCF_INTC0_ICR48 = 0x2;
+
+ MCF_INTC0_IMRH &= ~(
+ MCF_INTC_IMRH_INT_MASK36 |
+ MCF_INTC_IMRH_INT_MASK37 |
+ MCF_INTC_IMRH_INT_MASK38 |
+ MCF_INTC_IMRH_INT_MASK39 |
+ MCF_INTC_IMRH_INT_MASK40 |
+ MCF_INTC_IMRH_INT_MASK41 |
+ MCF_INTC_IMRH_INT_MASK42 |
+ MCF_INTC_IMRH_INT_MASK43 |
+ MCF_INTC_IMRH_INT_MASK44 |
+ MCF_INTC_IMRH_INT_MASK45 |
+ MCF_INTC_IMRH_INT_MASK46 |
+ MCF_INTC_IMRH_INT_MASK47 |
+ MCF_INTC_IMRH_INT_MASK48 );
+
+ /* Set up gpio outputs for MII lines */
+ MCF_GPIO_PAR_FECI2C |= (0 |
+ MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC |
+ MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO);
+ MCF_GPIO_PAR_FEC = (0 |
+ MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC |
+ MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC);
+}
+
+static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep)
+{
+ volatile fec_t *fecp;
+
+ fecp = fep->hwp;
+ fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;
+ fecp->fec_x_cntrl = 0x00;
+
+ /*
+ * Set MII speed to 2.5 MHz
+ */
+ fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2;
+ fecp->fec_mii_speed = fep->phy_speed;
+
+ fec_restart(dev, 0);
+}
+
+static void __inline__ fec_get_mac(struct net_device *dev)
+{
+ struct fec_enet_private *fep = netdev_priv(dev);
+ volatile fec_t *fecp;
+ unsigned char *iap, tmpaddr[ETH_ALEN];
+
+ fecp = fep->hwp;
+
+ if (FEC_FLASHMAC) {
+ /*
+ * Get MAC address from FLASH.
+ * If it is all 1's or 0's, use the default.
+ */
+ iap = FEC_FLASHMAC;
+ if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) &&
+ (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0))
+ iap = fec_mac_default;
+ if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) &&
+ (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff))
+ iap = fec_mac_default;
+ } else {
+ *((unsigned long *) &tmpaddr[0]) = fecp->fec_addr_low;
+ *((unsigned short *) &tmpaddr[4]) = (fecp->fec_addr_high >> 16);
+ iap = &tmpaddr[0];
+ }
+
+ memcpy(dev->dev_addr, iap, ETH_ALEN);
+
+ /* Adjust MAC if using default MAC address */
+ if (iap == fec_mac_default)
+ dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;
+}
+
+static void __inline__ fec_enable_phy_intr(void)
+{
+}
+
+static void __inline__ fec_disable_phy_intr(void)
+{
+}
+
+static void __inline__ fec_phy_ack_intr(void)
+{
+}
+
+static void __inline__ fec_localhw_setup(void)
+{
+}
+
+/*
+ * Do not need to make region uncached on 532x.
+ */
+static void __inline__ fec_uncache(unsigned long addr)
+{
+}
+
+/* ------------------------------------------------------------------------- */
+
+
#else
/*
immap->im_ioport.iop_pddir = 0x1c58; /* Pre rev. D */
else
immap->im_ioport.iop_pddir = 0x1fff; /* Rev. D and later */
-
+
/* Set MII speed to 2.5 MHz
*/
- fecp->fec_mii_speed = fep->phy_speed =
+ fecp->fec_mii_speed = fep->phy_speed =
((bd->bi_busfreq * 1000000) / 2500000) & 0x7e;
}
fecp = fep->hwp;
- /* Enable MII command finished interrupt
+ /* Enable MII command finished interrupt
*/
fecp->fec_ivec = (FEC_INTERRUPT/2) << 29;
}
if (status & PHY_CONF_LOOP)
printk(", loopback enabled");
-
+
printk(".\n");
fep->sequence_done = 1;
if (fep->link) {
duplex = 0;
- if (fep->phy_status
+ if (fep->phy_status
& (PHY_STAT_100FDX | PHY_STAT_10FDX))
duplex = 1;
fec_restart(dev, duplex);
printk(" -- %s\n", phy_info[i]->name);
else
printk(" -- unknown PHY!\n");
-
+
fep->phy = phy_info[i];
fep->phy_id_done = 1;
}
if (fep->phy_addr < 32) {
if ((phytype = (mii_reg & 0xffff)) != 0xffff && phytype != 0) {
-
+
/* Got first part of ID, now get remainder.
*/
fep->phy_id = phytype << 16;
mii_link_interrupt(void *dev_id)
#else
static irqreturn_t
-mii_link_interrupt(int irq, void * dev_id, struct pt_regs * regs)
+mii_link_interrupt(int irq, void * dev_id)
#endif
{
struct net_device *dev = dev_id;
mii_do_cmd(dev, fep->phy->config);
mii_do_cmd(dev, phy_cmd_config); /* display configuration */
- /* FIXME: use netif_carrier_{on,off} ; this polls
- * until link is up which is wrong... could be
- * 30 seconds or more we are trapped in here. -jgarzik
+ /* Poll until the PHY tells us its configuration
+ * (not link state).
+ * Request is initiated by mii_do_cmd above, but answer
+ * comes by interrupt.
+ * This should take about 25 usec per register at 2.5 MHz,
+ * and we read approximately 5 registers.
*/
while(!fep->sequence_done)
schedule();
ep = fep->hwp;
if (dev->flags&IFF_PROMISC) {
- /* Log any net taps. */
- printk("%s: Promiscuous mode enabled.\n", dev->name);
ep->fec_r_cntrl |= 0x0008;
} else {
*/
ep->fec_hash_table_high = 0;
ep->fec_hash_table_low = 0;
-
+
dmi = dev->mc_list;
for (j = 0; j < dev->mc_count; j++, dmi = dmi->next)
*/
if (!(dmi->dmi_addr[0] & 1))
continue;
-
+
/* calculate crc32 value of mac address
*/
crc = 0xffffffff;
which point to specific bit in he hash registers
*/
hash = (crc >> (32 - HASH_BITS)) & 0x3f;
-
+
if (hash > 31)
ep->fec_hash_table_high |= 1 << (hash - 32);
else
*/
fec_request_intrs(dev);
- /* Clear and enable interrupts */
- fecp->fec_ievent = 0xffc00000;
- fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_TXB |
- FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII);
fecp->fec_hash_table_high = 0;
fecp->fec_hash_table_low = 0;
fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
fecp->fec_ecntrl = 2;
- fecp->fec_r_des_active = 0x01000000;
+ fecp->fec_r_des_active = 0;
dev->base_addr = (unsigned long)fecp;
/* setup MII interface */
fec_set_mii(dev, fep);
+ /* Clear and enable interrupts */
+ fecp->fec_ievent = 0xffc00000;
+ fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_TXB |
+ FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII);
+
/* Queue up command to detect the PHY and initialize the
* remainder of the interface.
*/
fecp->fec_ecntrl = 1;
udelay(10);
- /* Enable interrupts we wish to service.
- */
- fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_TXB |
- FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII);
-
/* Clear any outstanding interrupt.
*/
fecp->fec_ievent = 0xffc00000;
/* And last, enable the transmit and receive processing.
*/
fecp->fec_ecntrl = 2;
- fecp->fec_r_des_active = 0x01000000;
+ fecp->fec_r_des_active = 0;
+
+ /* Enable interrupts we wish to service.
+ */
+ fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_TXB |
+ FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII);
}
static void
fep = netdev_priv(dev);
fecp = fep->hwp;
- fecp->fec_x_cntrl = 0x01; /* Graceful transmit stop */
-
- while(!(fecp->fec_ievent & FEC_ENET_GRA));
+ /*
+ ** We cannot expect a graceful transmit stop without link !!!
+ */
+ if (fep->link)
+ {
+ fecp->fec_x_cntrl = 0x01; /* Graceful transmit stop */
+ udelay(10);
+ if (!(fecp->fec_ievent & FEC_ENET_GRA))
+ printk("fec_stop : Graceful transmit stop did not complete !\n");
+ }
/* Whack a reset. We should wait for this.
*/
git://git.onelab.eu / linux-2.6.git / blobdiff