jul/09/2002 : only implement two kind of dongle currently.
Oct/02/2002 : work on VT8231 and VT8233 .
Aug/06/2003 : change driver format to pci driver .
+
+2004-02-16: <sda@bdit.de>
+- Removed unneeded 'legacy' pci stuff.
+- Make sure SIR mode is set (hw_init()) before calling mode-dependant stuff.
+- On speed change from core, don't send SIR frame with new speed.
+ Use current speed and change speeds later.
+- Make module-param dongle_id actually work.
+- New dongle_id 17 (0x11): TDFS4500. Single-ended SIR only.
+ Tested with home-grown PCB on EPIA boards.
+- Code cleanup.
********************************************************************/
#include <linux/module.h>
#include "via-ircc.h"
-//#define DBG_IO 1
-//#define DBGMSG 1
-//#define DBGMSG_96 1
-//#define DBGMSG_76 1
-//static int debug=0;
-
-
-#define DBG(x) {if (debug) x;}
+#define VIA_MODULE_NAME "via-ircc"
+#define CHIP_IO_EXTENT 0x40
-#define VIA_MODULE_NAME "via-ircc"
-#define CHIP_IO_EXTENT 8
-#define BROKEN_DONGLE_ID
-
-static char *driver_name = "via-ircc";
+static char *driver_name = VIA_MODULE_NAME;
/* Module parameters */
static int qos_mtt_bits = 0x07; /* 1 ms or more */
-static int dongle_id = 9; //defalut IBM type
+static int dongle_id = 0; /* default: probe */
-/* Resource is allocate by BIOS user only need to supply dongle_id*/
-MODULE_PARM(dongle_id, "i");
+/* We can't guess the type of connected dongle, user *must* supply it. */
+module_param(dongle_id, int, 0);
+/* FIXME : we should not need this, because instances should be automatically
+ * managed by the PCI layer. Especially that we seem to only be using the
+ * first entry. Jean II */
/* Max 4 instances for now */
static struct via_ircc_cb *dev_self[] = { NULL, NULL, NULL, NULL };
/* Some prototypes */
static int via_ircc_open(int i, chipio_t * info, unsigned int id);
static int __exit via_ircc_close(struct via_ircc_cb *self);
-static int via_ircc_setup(chipio_t * info, unsigned int id);
static int via_ircc_dma_receive(struct via_ircc_cb *self);
static int via_ircc_dma_receive_complete(struct via_ircc_cb *self,
int iobase);
struct net_device *dev);
static int via_ircc_hard_xmit_fir(struct sk_buff *skb,
struct net_device *dev);
+static void via_hw_init(struct via_ircc_cb *self);
static void via_ircc_change_speed(struct via_ircc_cb *self, __u32 baud);
static irqreturn_t via_ircc_interrupt(int irq, void *dev_id,
struct pt_regs *regs);
static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_device_id *id);
static void __exit via_remove_one (struct pci_dev *pdev);
-/* Should use udelay() instead, even if we are x86 only - Jean II */
+/* FIXME : Should use udelay() instead, even if we are x86 only - Jean II */
static void iodelay(int udelay)
{
u8 data;
}
static struct pci_device_id via_pci_tbl[] = {
- { PCI_VENDOR_ID_VIA, DeviceID1, PCI_ANY_ID, PCI_ANY_ID,0,0,0 },
- { PCI_VENDOR_ID_VIA, DeviceID2, PCI_ANY_ID, PCI_ANY_ID,0,0,1 },
- { PCI_VENDOR_ID_VIA, DeviceID3, PCI_ANY_ID, PCI_ANY_ID,0,0,2 },
- { PCI_VENDOR_ID_VIA, DeviceID4, PCI_ANY_ID, PCI_ANY_ID,0,0,3 },
- { PCI_VENDOR_ID_VIA, DeviceID5, PCI_ANY_ID, PCI_ANY_ID,0,0,4 },
+ { PCI_VENDOR_ID_VIA, 0x8231, PCI_ANY_ID, PCI_ANY_ID,0,0,0 },
+ { PCI_VENDOR_ID_VIA, 0x3109, PCI_ANY_ID, PCI_ANY_ID,0,0,1 },
+ { PCI_VENDOR_ID_VIA, 0x3074, PCI_ANY_ID, PCI_ANY_ID,0,0,2 },
+ { PCI_VENDOR_ID_VIA, 0x3147, PCI_ANY_ID, PCI_ANY_ID,0,0,3 },
+ { PCI_VENDOR_ID_VIA, 0x3177, PCI_ANY_ID, PCI_ANY_ID,0,0,4 },
{ 0, }
};
{
int rc;
-#ifdef HEADMSG
- DBG(printk(KERN_INFO "via_ircc_init ......\n"));
-#endif
- rc = pci_register_driver (&via_driver);
-#ifdef HEADMSG
- DBG(printk(KERN_INFO "via_ircc_init :rc = %d......\n",rc));
-#endif
- if (rc < 1) {
-#ifdef HEADMSG
- DBG(printk(KERN_INFO "via_ircc_init return -ENODEV......\n"));
-#endif
- if (rc == 0) pci_unregister_driver (&via_driver);
+ IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
+ rc = pci_register_driver(&via_driver);
+ if (rc < 0) {
+ IRDA_DEBUG(0, "%s(): error rc = %d, returning -ENODEV...\n",
+ __FUNCTION__, rc);
return -ENODEV;
}
return 0;
-
}
static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_device_id *id)
u8 temp,oldPCI_40,oldPCI_44,bTmp,bTmp1;
u16 Chipset,FirDRQ1,FirDRQ0,FirIRQ,FirIOBase;
chipio_t info;
-
-#ifdef HEADMSG
- DBG(printk(KERN_INFO "via_init_one : Device ID=(0X%X)\n",id->device));
-#endif
- if(id->device != DeviceID1 && id->device != DeviceID2 &&
- id->device != DeviceID3 && id->device != DeviceID4 &&
- id->device != DeviceID5 ){
-#ifdef HEADMSG
- DBG(printk(KERN_INFO "via_init_one : Device ID(0X%X) not Supported\n",id->device));
-#endif
- return -ENODEV; //South not exist !!!!!
- }
+
+ IRDA_DEBUG(2, "%s(): Device ID=(0X%X)\n", __FUNCTION__, id->device);
+
rc = pci_enable_device (pcidev);
-#ifdef HEADMSG
- DBG(printk(KERN_INFO "via_init_one : rc=%d\n",rc));
-#endif
- if (rc)
- return -ENODEV;
- //South Bridge exist
+ if (rc) {
+ IRDA_DEBUG(0, "%s(): error rc = %d\n", __FUNCTION__, rc);
+ return -ENODEV;
+ }
+
+ // South Bridge exist
if ( ReadLPCReg(0x20) != 0x3C )
Chipset=0x3096;
else
Chipset=0x3076;
+
if (Chipset==0x3076) {
-#ifdef HEADMSG
- DBG(printk(KERN_INFO "via_init_one : 3076 ......\n"));
-#endif
+ IRDA_DEBUG(2, "%s(): Chipset = 3076\n", __FUNCTION__);
+
WriteLPCReg(7,0x0c );
temp=ReadLPCReg(0x30);//check if BIOS Enable Fir
if((temp&0x01)==1) { // BIOS close or no FIR
} else
rc = -ENODEV; //IR not turn on
} else { //Not VT1211
-#ifdef HEADMSG
- DBG(printk(KERN_INFO "via_init_one : 3096 ......\n"));
-#endif
+ IRDA_DEBUG(2, "%s(): Chipset = 3096\n", __FUNCTION__);
+
pci_read_config_byte(pcidev,0x67,&bTmp);//check if BIOS Enable Fir
if((bTmp&0x01)==1) { // BIOS enable FIR
//Enable Double DMA clock
} else
rc = -ENODEV; //IR not turn on !!!!!
}//Not VT1211
-#ifdef HEADMSG
- DBG(printk(KERN_INFO "via_init_one End : rc=%d\n",rc));
-#endif
+
+ IRDA_DEBUG(2, "%s(): End - rc = %d\n", __FUNCTION__, rc);
return rc;
}
{
int i;
-#ifdef HEADMSG
- DBG(printk(KERN_INFO "via_ircc_clean\n"));
-#endif
+ IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
for (i=0; i < 4; i++) {
if (dev_self[i])
via_ircc_close(dev_self[i]);
static void __exit via_remove_one (struct pci_dev *pdev)
{
-#ifdef HEADMSG
- DBG(printk(KERN_INFO "via_remove_one : ......\n"));
-#endif
+ IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
+ /* FIXME : This is ugly. We should use pci_get_drvdata(pdev);
+ * to get our driver instance and call directly via_ircc_close().
+ * See vlsi_ir for details...
+ * Jean II */
via_ircc_clean();
+ /* FIXME : This should be in via_ircc_close(), because here we may
+ * theoritically disable still configured devices :-( - Jean II */
+ pci_disable_device(pdev);
}
static void __exit via_ircc_cleanup(void)
{
+ IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
-#ifdef HEADMSG
- DBG(printk(KERN_INFO "via_ircc_cleanup ......\n"));
-#endif
+ /* FIXME : This should be redundant, as pci_unregister_driver()
+ * should call via_remove_one() on each device.
+ * Jean II */
via_ircc_clean();
+
+ /* Cleanup all instances of the driver */
pci_unregister_driver (&via_driver);
}
struct via_ircc_cb *self;
int err;
- if ((via_ircc_setup(info, id)) == -1)
- return -1;
+ IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
/* Allocate new instance of the driver */
dev = alloc_irdadev(sizeof(struct via_ircc_cb));
self->netdev = dev;
spin_lock_init(&self->lock);
+ /* FIXME : We should store our driver instance in the PCI layer,
+ * using pci_set_drvdata(), not in this array.
+ * See vlsi_ir for details... - Jean II */
+ /* FIXME : 'i' is always 0 (see via_init_one()) :-( - Jean II */
/* Need to store self somewhere */
dev_self[i] = self;
self->index = i;
/* Reserve the ioports that we need */
if (!request_region(self->io.fir_base, self->io.fir_ext, driver_name)) {
-// WARNING("%s(), can't get iobase of 0x%03x\n", __FUNCTION__, self->io.fir_base);
+ IRDA_DEBUG(0, "%s(), can't get iobase of 0x%03x\n",
+ __FUNCTION__, self->io.fir_base);
err = -ENODEV;
goto err_out1;
}
/* Initialize QoS for this device */
irda_init_max_qos_capabilies(&self->qos);
+
+ /* Check if user has supplied the dongle id or not */
+ if (!dongle_id)
+ dongle_id = via_ircc_read_dongle_id(self->io.fir_base);
+ self->io.dongle_id = dongle_id;
+
/* The only value we must override it the baudrate */
-// self->qos.baud_rate.bits = IR_9600;// May use this for testing
+ /* Maximum speeds and capabilities are dongle-dependant. */
+ switch( self->io.dongle_id ){
+ case 0x0d:
+ self->qos.baud_rate.bits =
+ IR_9600 | IR_19200 | IR_38400 | IR_57600 | IR_115200 |
+ IR_576000 | IR_1152000 | (IR_4000000 << 8);
+ break;
+ default:
+ self->qos.baud_rate.bits =
+ IR_9600 | IR_19200 | IR_38400 | IR_57600 | IR_115200;
+ break;
+ }
- self->qos.baud_rate.bits =
- IR_9600 | IR_19200 | IR_38400 | IR_57600 | IR_115200 |
- IR_576000 | IR_1152000 | (IR_4000000 << 8);
+ /* Following was used for testing:
+ *
+ * self->qos.baud_rate.bits = IR_9600;
+ *
+ * Is is no good, as it prohibits (error-prone) speed-changes.
+ */
self->qos.min_turn_time.bits = qos_mtt_bits;
irda_qos_bits_to_value(&self->qos);
if (err)
goto err_out4;
- MESSAGE("IrDA: Registered device %s\n", dev->name);
-
- /* Check if user has supplied the dongle id or not */
- if (!dongle_id)
- dongle_id = via_ircc_read_dongle_id(self->io.fir_base);
- self->io.dongle_id = dongle_id;
- via_ircc_change_dongle_speed(self->io.fir_base, 9600,
- self->io.dongle_id);
+ MESSAGE("IrDA: Registered device %s (via-ircc)\n", dev->name);
+ /* Initialise the hardware..
+ */
+ self->io.speed = 9600;
+ via_hw_init(self);
return 0;
err_out4:
dma_free_coherent(NULL, self->tx_buff.truesize,
{
int iobase;
- IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+ IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
ASSERT(self != NULL, return -1;);
unregister_netdev(self->netdev);
/* Release the PORT that this driver is using */
- IRDA_DEBUG(4, "%s(), Releasing Region %03x\n",
+ IRDA_DEBUG(2, "%s(), Releasing Region %03x\n",
__FUNCTION__, self->io.fir_base);
release_region(self->io.fir_base, self->io.fir_ext);
if (self->tx_buff.head)
}
/*
- * Function via_ircc_setup (info)
+ * Function via_hw_init(self)
*
* Returns non-negative on success.
*
+ * Formerly via_ircc_setup
*/
-static int via_ircc_setup(chipio_t * info, unsigned int chip_id)
+static void via_hw_init(struct via_ircc_cb *self)
{
- int iobase = info->fir_base;
+ int iobase = self->io.fir_base;
+
+ IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
SetMaxRxPacketSize(iobase, 0x0fff); //set to max:4095
// FIFO Init
EnTXFIFOReadyInt(iobase, OFF);
InvertTX(iobase, OFF);
InvertRX(iobase, OFF);
+
if (ReadLPCReg(0x20) == 0x3c)
WriteLPCReg(0xF0, 0); // for VT1211
- if (IsSIROn(iobase)) {
- SIRFilter(iobase, ON);
- SIRRecvAny(iobase, ON);
- } else {
- SIRFilter(iobase, OFF);
- SIRRecvAny(iobase, OFF);
- }
- //Int Init
+ /* Int Init */
EnRXSpecInt(iobase, ON);
- //DMA Init Later....
- WriteReg(iobase, I_ST_CT_0, 0x80);
- EnableDMA(iobase, ON);
- return 0;
+ /* The following is basically hwreset */
+ /* If this is the case, why not just call hwreset() ? Jean II */
+ ResetChip(iobase, 5);
+ EnableDMA(iobase, OFF);
+ EnableTX(iobase, OFF);
+ EnableRX(iobase, OFF);
+ EnRXDMA(iobase, OFF);
+ EnTXDMA(iobase, OFF);
+ RXStart(iobase, OFF);
+ TXStart(iobase, OFF);
+ InitCard(iobase);
+ CommonInit(iobase);
+ SIRFilter(iobase, ON);
+ SetSIR(iobase, ON);
+ CRC16(iobase, ON);
+ EnTXCRC(iobase, 0);
+ WriteReg(iobase, I_ST_CT_0, 0x00);
+ SetBaudRate(iobase, 9600);
+ SetPulseWidth(iobase, 12);
+ SetSendPreambleCount(iobase, 0);
+
+ self->io.speed = 9600;
+ self->st_fifo.len = 0;
+
+ via_ircc_change_dongle_speed(iobase, self->io.speed,
+ self->io.dongle_id);
+
+ WriteReg(iobase, I_ST_CT_0, 0x80);
}
/*
*/
static int via_ircc_read_dongle_id(int iobase)
{
- int dongle_id = 9;
+ int dongle_id = 9; /* Default to IBM */
+ ERROR("via-ircc: dongle probing not supported, please specify dongle_id module parameter.\n");
return dongle_id;
}
{
u8 mode = 0;
- WriteReg(iobase, I_ST_CT_0, 0x0);
- switch (dongle_id) { //HP1100
- case 0x00: /* same as */
- case 0x01: /* Differential serial interface */
- break;
- case 0x02: /* same as */
- case 0x03: /* Reserved */
- break;
- case 0x04: /* Sharp RY5HD01 */
- break;
- case 0x05: /* Reserved, but this is what the Thinkpad reports */
- break;
- case 0x06: /* Single-ended serial interface */
- break;
- case 0x07: /* Consumer-IR only */
- break;
+ /* speed is unused, as we use IsSIROn()/IsMIROn() */
+ speed = speed;
+
+ IRDA_DEBUG(1, "%s(): change_dongle_speed to %d for 0x%x, %d\n",
+ __FUNCTION__, speed, iobase, dongle_id);
+
+ switch (dongle_id) {
+
+ /* Note: The dongle_id's listed here are derived from
+ * nsc-ircc.c */
case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
UseOneRX(iobase, ON); // use one RX pin RX1,RX2
}
}
break;
+
case 0x09: /* IBM31T1100 or Temic TFDS6000/TFDS6500 */
UseOneRX(iobase, ON); //use ONE RX....RX1
InvertTX(iobase, OFF);
InvertRX(iobase, OFF); // invert RX pin
+
EnRX2(iobase, ON);
EnGPIOtoRX2(iobase, OFF);
if (IsSIROn(iobase)) { //sir
}
}
break;
+
case 0x0d:
UseOneRX(iobase, OFF); // use two RX pin RX1,RX2
InvertTX(iobase, OFF);
EnRX2(iobase, OFF); //fir to rx
}
break;
+
+ case 0x11: /* Temic TFDS4500 */
+
+ IRDA_DEBUG(2, "%s: Temic TFDS4500: One RX pin, TX normal, RX inverted.\n", __FUNCTION__);
+
+ UseOneRX(iobase, ON); //use ONE RX....RX1
+ InvertTX(iobase, OFF);
+ InvertRX(iobase, ON); // invert RX pin
+
+ EnRX2(iobase, ON); //sir to rx2
+ EnGPIOtoRX2(iobase, OFF);
+
+ if( IsSIROn(iobase) ){ //sir
+
+ // Mode select On
+ SlowIRRXLowActive(iobase, ON);
+ udelay(20);
+ // Mode select Off
+ SlowIRRXLowActive(iobase, OFF);
+
+ } else{
+ IRDA_DEBUG(0, "%s: Warning: TFDS4500 not running in SIR mode !\n", __FUNCTION__);
+ }
+ break;
+
case 0x0ff: /* Vishay */
if (IsSIROn(iobase))
mode = 0;
else if (IsVFIROn(iobase))
mode = 5; //VFIR-16
SI_SetMode(iobase, mode);
- }
- WriteReg(iobase, I_ST_CT_0, 0x80);
+ break;
+ default:
+ ERROR("%s: Error: dongle_id %d unsupported !\n",
+ __FUNCTION__, dongle_id);
+ }
}
/*
iobase = self->io.fir_base;
/* Update accounting for new speed */
self->io.speed = speed;
-#ifdef DBGMSG
- DBG(printk(KERN_INFO "change_speed =%x......\n", speed));
-#endif
-
-#ifdef DBG_IO
- if (self->io.speed > 0x2580)
- outb(0xaa, 0x90);
- else
- outb(0xbb, 0x90);
-#endif
+ IRDA_DEBUG(1, "%s: change_speed to %d bps.\n", __FUNCTION__, speed);
+ WriteReg(iobase, I_ST_CT_0, 0x0);
/* Controller mode sellection */
switch (speed) {
+ case 2400:
case 9600:
- value = 11;
- SetSIR(iobase, ON);
- CRC16(iobase, ON);
- break;
case 19200:
- value = 5;
- SetSIR(iobase, ON);
- CRC16(iobase, ON);
- break;
case 38400:
- value = 2;
- SetSIR(iobase, ON);
- CRC16(iobase, ON);
- break;
case 57600:
- value = 1;
- SetSIR(iobase, ON);
- CRC16(iobase, ON);
- break;
case 115200:
- value = 0;
+ value = (115200/speed)-1;
SetSIR(iobase, ON);
CRC16(iobase, ON);
break;
case 576000:
+ /* FIXME: this can't be right, as it's the same as 115200,
+ * and 576000 is MIR, not SIR. */
value = 0;
SetSIR(iobase, ON);
CRC16(iobase, ON);
case 1152000:
value = 0;
SetMIR(iobase, ON);
+ /* FIXME: CRC ??? */
break;
case 4000000:
value = 0;
case 16000000:
value = 0;
SetVFIR(iobase, ON);
+ /* FIXME: CRC ??? */
break;
default:
value = 0;
break;
}
+
/* Set baudrate to 0x19[2..7] */
bTmp = (ReadReg(iobase, I_CF_H_1) & 0x03);
- bTmp = bTmp | (value << 2);
+ bTmp |= value << 2;
WriteReg(iobase, I_CF_H_1, bTmp);
+
+ /* Some dongles may need to be informed about speed changes. */
via_ircc_change_dongle_speed(iobase, speed, self->io.dongle_id);
-// EnTXFIFOHalfLevelInt(iobase,ON);
+
/* Set FIFO size to 64 */
SetFIFO(iobase, 64);
+
+ /* Enable IR */
+ WriteReg(iobase, I_ST_CT_0, 0x80);
+
+ // EnTXFIFOHalfLevelInt(iobase,ON);
+
/* Enable some interrupts so we can receive frames */
//EnAllInt(iobase,ON);
SIRFilter(iobase, OFF);
SIRRecvAny(iobase, OFF);
}
+
if (speed > 115200) {
/* Install FIR xmit handler */
dev->hard_start_xmit = via_ircc_hard_xmit_fir;
self->tx_buff.truesize);
self->stats.tx_bytes += self->tx_buff.len;
- SetBaudRate(iobase, speed);
+ /* Send this frame with old speed */
+ SetBaudRate(iobase, self->io.speed);
SetPulseWidth(iobase, 12);
SetSendPreambleCount(iobase, 0);
WriteReg(iobase, I_ST_CT_0, 0x80);
static int via_ircc_dma_xmit(struct via_ircc_cb *self, u16 iobase)
{
-// int i;
-// u8 *ch;
-
EnTXDMA(iobase, OFF);
self->io.direction = IO_XMIT;
EnPhys(iobase, ON);
((u8 *)self->tx_fifo.queue[self->tx_fifo.ptr].start -
self->tx_buff.head) + self->tx_buff_dma,
self->tx_fifo.queue[self->tx_fifo.ptr].len, DMA_TX_MODE);
-#ifdef DBGMSG
- DBG(printk
- (KERN_INFO "dma_xmit:tx_fifo.ptr=%x,len=%x,tx_fifo.len=%x..\n",
- self->tx_fifo.ptr, self->tx_fifo.queue[self->tx_fifo.ptr].len,
- self->tx_fifo.len));
-/*
- ch = self->tx_fifo.queue[self->tx_fifo.ptr].start;
- for(i=0 ; i < self->tx_fifo.queue[self->tx_fifo.ptr].len ; i++) {
- DBG(printk(KERN_INFO "%x..\n",ch[i]));
- }
-*/
-#endif
+ IRDA_DEBUG(1, "%s: tx_fifo.ptr=%x,len=%x,tx_fifo.len=%x..\n",
+ __FUNCTION__, self->tx_fifo.ptr,
+ self->tx_fifo.queue[self->tx_fifo.ptr].len,
+ self->tx_fifo.len);
SetSendByte(iobase, self->tx_fifo.queue[self->tx_fifo.ptr].len);
RXStart(iobase, OFF);
int ret = TRUE;
u8 Tx_status;
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+ IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
iobase = self->io.fir_base;
/* Disable DMA */
// DisableDmaChannel(self->io.dma);
self->tx_fifo.ptr++;
}
}
-#ifdef DBGMSG
- DBG(printk
- (KERN_INFO
- "via_ircc_dma_xmit_complete:tx_fifo.len=%x ,tx_fifo.ptr=%x,tx_fifo.free=%x...\n",
- self->tx_fifo.len, self->tx_fifo.ptr, self->tx_fifo.free));
-#endif
+ IRDA_DEBUG(1,
+ "%s: tx_fifo.len=%x ,tx_fifo.ptr=%x,tx_fifo.free=%x...\n",
+ __FUNCTION__,
+ self->tx_fifo.len, self->tx_fifo.ptr, self->tx_fifo.free);
/* F01_S
// Any frames to be sent back-to-back?
if (self->tx_fifo.len) {
iobase = self->io.fir_base;
+ IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
self->tx_fifo.tail = self->tx_buff.head;
self->RxDataReady = 0;
self->rx_buff.data = self->rx_buff.head;
self->st_fifo.len = self->st_fifo.pending_bytes = 0;
self->st_fifo.tail = self->st_fifo.head = 0;
+
EnPhys(iobase, ON);
EnableTX(iobase, OFF);
EnableRX(iobase, ON);
if (len == 0)
return TRUE; //interrupt only, data maybe move by RxT
if (((len - 4) < 2) || ((len - 4) > 2048)) {
-#ifdef DBGMSG
- DBG(printk
- (KERN_INFO
- "receive_comple:Trouble:len=%x,CurCount=%x,LastCount=%x..\n",
- len, RxCurCount(iobase, self),
- self->RxLastCount));
-#endif
+ IRDA_DEBUG(1, "%s(): Trouble:len=%x,CurCount=%x,LastCount=%x..\n",
+ __FUNCTION__, len, RxCurCount(iobase, self),
+ self->RxLastCount);
hwreset(self);
return FALSE;
}
-#ifdef DBGMSG
- DBG(printk
- (KERN_INFO
- "recv_comple:fifo.len=%x,len=%x,CurCount=%x..\n",
- st_fifo->len, len - 4, RxCurCount(iobase, self)));
-#endif
+ IRDA_DEBUG(2, "%s(): fifo.len=%x,len=%x,CurCount=%x..\n",
+ __FUNCTION__,
+ st_fifo->len, len - 4, RxCurCount(iobase, self));
+
st_fifo->entries[st_fifo->tail].status = status;
st_fifo->entries[st_fifo->tail].len = len;
st_fifo->pending_bytes += len;
}
skb_reserve(skb, 1);
skb_put(skb, len - 4);
+
memcpy(skb->data, self->rx_buff.data, len - 4);
-#ifdef DBGMSG
- DBG(printk
- (KERN_INFO "RxT:len=%x.rx_buff=%x\n", len - 4,
- self->rx_buff.data));
-/* for(i=0 ; i < (len-4) ; i++) {
- DBG(printk(KERN_INFO "%x..\n",self->rx_buff.data[i]));
- }
-*/
-#endif
+ IRDA_DEBUG(2, "%s(): len=%x.rx_buff=%p\n", __FUNCTION__,
+ len - 4, self->rx_buff.data);
+
// Move to next frame
self->rx_buff.data += len;
self->stats.rx_bytes += len;
len = GetRecvByte(iobase, self);
-#ifdef DBGMSG
- DBG(printk(KERN_INFO "upload_rxdata: len=%x\n", len));
-#endif
+ IRDA_DEBUG(2, "%s(): len=%x\n", __FUNCTION__, len);
+
skb = dev_alloc_skb(len + 1);
if ((skb == NULL) || ((len - 4) < 2)) {
self->stats.rx_dropped++;
skb_reserve(skb, 1);
skb_put(skb, len - 4);
memcpy(skb->data, self->rx_buff.data, len - 4);
-#ifdef DBGMSG
- DBG(printk
- (KERN_INFO "RxT:len=%x.head=%x\n", len - 4,
- st_fifo->head));
-#endif
+
+ IRDA_DEBUG(2, "%s(): len=%x.head=%x\n", __FUNCTION__,
+ len - 4, st_fifo->head);
+
// Move to next frame
self->rx_buff.data += len;
self->stats.rx_bytes += len;
netif_rx(skb);
} //while
self->RetryCount = 0;
-#ifdef DBGMSG
- DBG(printk
- (KERN_INFO
- "RxT:End of upload HostStatus=%x,RxStatus=%x\n",
- GetHostStatus(iobase), GetRXStatus(iobase)));
-#endif
+
+ IRDA_DEBUG(2,
+ "%s(): End of upload HostStatus=%x,RxStatus=%x\n",
+ __FUNCTION__,
+ GetHostStatus(iobase), GetRXStatus(iobase));
+
/*
* if frame is receive complete at this routine ,then upload
* frame.
iobase = self->io.fir_base;
spin_lock(&self->lock);
iHostIntType = GetHostStatus(iobase);
+
+ IRDA_DEBUG(4, "%s(): iHostIntType %02x: %s %s %s %02x\n",
+ __FUNCTION__, iHostIntType,
+ (iHostIntType & 0x40) ? "Timer" : "",
+ (iHostIntType & 0x20) ? "Tx" : "",
+ (iHostIntType & 0x10) ? "Rx" : "",
+ (iHostIntType & 0x0e) >> 1);
+
if ((iHostIntType & 0x40) != 0) { //Timer Event
self->EventFlag.TimeOut++;
ClearTimerInt(iobase, 1);
*/
if (self->RxDataReady > 30) {
hwreset(self);
- if (irda_device_txqueue_empty
- (self->netdev)) {
+ if (irda_device_txqueue_empty(self->netdev)) {
via_ircc_dma_receive(self);
}
} else { // call this to upload frame.
} //Timer Event
if ((iHostIntType & 0x20) != 0) { //Tx Event
iTxIntType = GetTXStatus(iobase);
+
+ IRDA_DEBUG(4, "%s(): iTxIntType %02x: %s %s %s %s\n",
+ __FUNCTION__, iTxIntType,
+ (iTxIntType & 0x08) ? "FIFO underr." : "",
+ (iTxIntType & 0x04) ? "EOM" : "",
+ (iTxIntType & 0x02) ? "FIFO ready" : "",
+ (iTxIntType & 0x01) ? "Early EOM" : "");
+
if (iTxIntType & 0x4) {
self->EventFlag.EOMessage++; // read and will auto clean
if (via_ircc_dma_xmit_complete(self)) {
if ((iHostIntType & 0x10) != 0) { //Rx Event
/* Check if DMA has finished */
iRxIntType = GetRXStatus(iobase);
-#ifdef DBGMSG
+
+ IRDA_DEBUG(4, "%s(): iRxIntType %02x: %s %s %s %s %s %s %s\n",
+ __FUNCTION__, iRxIntType,
+ (iRxIntType & 0x80) ? "PHY err." : "",
+ (iRxIntType & 0x40) ? "CRC err" : "",
+ (iRxIntType & 0x20) ? "FIFO overr." : "",
+ (iRxIntType & 0x10) ? "EOF" : "",
+ (iRxIntType & 0x08) ? "RxData" : "",
+ (iRxIntType & 0x02) ? "RxMaxLen" : "",
+ (iRxIntType & 0x01) ? "SIR bad" : "");
if (!iRxIntType)
- DBG(printk(KERN_INFO " RxIRQ =0\n"));
-#endif
+ IRDA_DEBUG(3, "%s(): RxIRQ =0\n", __FUNCTION__);
+
if (iRxIntType & 0x10) {
if (via_ircc_dma_receive_complete(self, iobase)) {
//F01 if(!(IsFIROn(iobase))) via_ircc_dma_receive(self);
}
} // No ERR
else { //ERR
-#ifdef DBGMSG
- DBG(printk
- (KERN_INFO
- " RxIRQ ERR:iRxIntType=%x,HostIntType=%x,CurCount=%x,RxLastCount=%x_____\n",
- iRxIntType, iHostIntType, RxCurCount(iobase,
- self),
- self->RxLastCount));
-#endif
+ IRDA_DEBUG(4, "%s(): RxIRQ ERR:iRxIntType=%x,HostIntType=%x,CurCount=%x,RxLastCount=%x_____\n",
+ __FUNCTION__, iRxIntType, iHostIntType,
+ RxCurCount(iobase, self),
+ self->RxLastCount);
+
if (iRxIntType & 0x20) { //FIFO OverRun ERR
ResetChip(iobase, 0);
ResetChip(iobase, 1);
{
int iobase;
iobase = self->io.fir_base;
-#ifdef DBGMSG
- DBG(printk(KERN_INFO "hwreset ....\n"));
-#endif
+
+ IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
ResetChip(iobase, 5);
EnableDMA(iobase, OFF);
EnableTX(iobase, OFF);
SetPulseWidth(iobase, 12);
SetSendPreambleCount(iobase, 0);
WriteReg(iobase, I_ST_CT_0, 0x80);
+
+ /* Restore speed. */
via_ircc_change_speed(self, self->io.speed);
+
self->st_fifo.len = 0;
}
iobase = self->io.fir_base;
if (CkRxRecv(iobase, self))
status = TRUE;
-#ifdef DBGMSG
- DBG(printk(KERN_INFO "is_receiving status=%x....\n", status));
-#endif
+
+ IRDA_DEBUG(2, "%s(): status=%x....\n", __FUNCTION__, status);
+
return status;
}
int iobase;
char hwname[32];
- IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+ IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
ASSERT(dev != NULL, return -1;);
self = (struct via_ircc_cb *) dev->priv;
self->stats.rx_packets = 0;
ASSERT(self != NULL, return 0;);
iobase = self->io.fir_base;
- if (request_irq
- (self->io.irq, via_ircc_interrupt, 0, dev->name, dev)) {
+ if (request_irq(self->io.irq, via_ircc_interrupt, 0, dev->name, dev)) {
WARNING("%s, unable to allocate irq=%d\n", driver_name,
self->io.irq);
return -EAGAIN;
EnAllInt(iobase, ON);
EnInternalLoop(iobase, OFF);
EnExternalLoop(iobase, OFF);
+
+ /* */
+ via_ircc_dma_receive(self);
+
/* Ready to play! */
netif_start_queue(dev);
* Open new IrLAP layer instance, now that everything should be
* initialized properly
*/
- sprintf(hwname, "VIA");
- /*
- * for different kernel ,irlap_open have different parameter.
- */
+ sprintf(hwname, "VIA @ 0x%x", iobase);
self->irlap = irlap_open(dev, &self->qos, hwname);
-// self->irlap = irlap_open(dev, &self->qos);
self->RxLastCount = 0;
struct via_ircc_cb *self;
int iobase;
- IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+ IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
ASSERT(dev != NULL, return -1;);
self = (struct via_ircc_cb *) dev->priv;
ASSERT(self != NULL, return 0;);
-#ifdef DBG_IO
- outb(0xff, 0x90);
- outb(0xff, 0x94);
-#endif
/* Stop device */
netif_stop_queue(dev);
/* Stop and remove instance of IrLAP */
ASSERT(dev != NULL, return -1;);
self = dev->priv;
ASSERT(self != NULL, return -1;);
- IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name,
+ IRDA_DEBUG(1, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name,
cmd);
/* Disable interrupts & save flags */
spin_lock_irqsave(&self->lock, flags);
git://git.onelab.eu / linux-2.6.git / blobdiff