Written/copyright 1999-2001 by Donald Becker.
Portions copyright (c) 2001,2002 Sun Microsystems (thockin@sun.com)
Portions copyright 2001,2002 Manfred Spraul (manfred@colorfullife.com)
+ Portions copyright 2004 Harald Welte <laforge@gnumonks.org>
This software may be used and distributed according to the terms of
the GNU General Public License (GPL), incorporated herein by reference.
TODO:
* big endian support with CFG:BEM instead of cpu_to_le32
- * support for an external PHY
- * NAPI
*/
#include <linux/config.h>
#include <linux/mii.h>
#include <linux/crc32.h>
#include <linux/bitops.h>
+#include <linux/prefetch.h>
#include <asm/processor.h> /* Processor type for cache alignment. */
#include <asm/io.h>
#include <asm/irq.h>
NETIF_MSG_TX_ERR)
static int debug = -1;
-/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
-static int max_interrupt_work = 20;
static int mtu;
/* Maximum number of multicast addresses to filter (vs. rx-all-multicast).
This chip uses a 512 element hash table based on the Ethernet CRC. */
-static int multicast_filter_limit = 100;
+static const int multicast_filter_limit = 100;
/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
Setting to > 1518 effectively disables this feature. */
NATSEMI_PG1_NREGS)
#define NATSEMI_REGS_VER 1 /* v1 added RFDR registers */
#define NATSEMI_REGS_SIZE (NATSEMI_NREGS * sizeof(u32))
-#define NATSEMI_EEPROM_SIZE 24 /* 12 16-bit values */
+#define NATSEMI_DEF_EEPROM_SIZE 24 /* 12 16-bit values */
/* Buffer sizes:
* The nic writes 32-bit values, even if the upper bytes of
#define NATSEMI_RX_LIMIT 2046 /* maximum supported by hardware */
/* These identify the driver base version and may not be removed. */
-static char version[] __devinitdata =
+static const char version[] __devinitdata =
KERN_INFO DRV_NAME " dp8381x driver, version "
DRV_VERSION ", " DRV_RELDATE "\n"
KERN_INFO " originally by Donald Becker <becker@scyld.com>\n"
MODULE_DESCRIPTION("National Semiconductor DP8381x series PCI Ethernet driver");
MODULE_LICENSE("GPL");
-module_param(max_interrupt_work, int, 0);
module_param(mtu, int, 0);
module_param(debug, int, 0);
module_param(rx_copybreak, int, 0);
module_param_array(options, int, NULL, 0);
module_param_array(full_duplex, int, NULL, 0);
-MODULE_PARM_DESC(max_interrupt_work,
- "DP8381x maximum events handled per interrupt");
MODULE_PARM_DESC(mtu, "DP8381x MTU (all boards)");
MODULE_PARM_DESC(debug, "DP8381x default debug level");
MODULE_PARM_DESC(rx_copybreak,
/* array of board data directly indexed by pci_tbl[x].driver_data */
-static struct {
+static const struct {
const char *name;
unsigned long flags;
} natsemi_pci_info[] __devinitdata = {
/* Based on MTU+slack. */
unsigned int rx_buf_sz;
int oom;
+ /* Interrupt status */
+ u32 intr_status;
/* Do not touch the nic registers */
int hands_off;
/* external phy that is used: only valid if dev->if_port != PORT_TP */
unsigned int iosize;
spinlock_t lock;
u32 msg_enable;
+ /* EEPROM data */
+ int eeprom_size;
};
static void move_int_phy(struct net_device *dev, int addr);
static int start_tx(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *regs);
static void netdev_error(struct net_device *dev, int intr_status);
-static void netdev_rx(struct net_device *dev);
+static int natsemi_poll(struct net_device *dev, int *budget);
+static void netdev_rx(struct net_device *dev, int *work_done, int work_to_do);
static void netdev_tx_done(struct net_device *dev);
static int natsemi_change_mtu(struct net_device *dev, int new_mtu);
#ifdef CONFIG_NET_POLL_CONTROLLER
return (void __iomem *) dev->base_addr;
}
+static inline void natsemi_irq_enable(struct net_device *dev)
+{
+ writel(1, ns_ioaddr(dev) + IntrEnable);
+ readl(ns_ioaddr(dev) + IntrEnable);
+}
+
+static inline void natsemi_irq_disable(struct net_device *dev)
+{
+ writel(0, ns_ioaddr(dev) + IntrEnable);
+ readl(ns_ioaddr(dev) + IntrEnable);
+}
+
static void move_int_phy(struct net_device *dev, int addr)
{
struct netdev_private *np = netdev_priv(dev);
spin_lock_init(&np->lock);
np->msg_enable = (debug >= 0) ? (1<<debug)-1 : NATSEMI_DEF_MSG;
np->hands_off = 0;
+ np->intr_status = 0;
+ np->eeprom_size = NATSEMI_DEF_EEPROM_SIZE;
/* Initial port:
* - If the nic was configured to use an external phy and if find_mii
dev->do_ioctl = &netdev_ioctl;
dev->tx_timeout = &tx_timeout;
dev->watchdog_timeo = TX_TIMEOUT;
+ dev->poll = natsemi_poll;
+ dev->weight = 64;
+
#ifdef CONFIG_NET_POLL_CONTROLLER
dev->poll_controller = &natsemi_poll_controller;
#endif
writel(rfcr, ioaddr + RxFilterAddr);
}
+static void reset_rx(struct net_device *dev)
+{
+ int i;
+ struct netdev_private *np = netdev_priv(dev);
+ void __iomem *ioaddr = ns_ioaddr(dev);
+
+ np->intr_status &= ~RxResetDone;
+
+ writel(RxReset, ioaddr + ChipCmd);
+
+ for (i=0;i<NATSEMI_HW_TIMEOUT;i++) {
+ np->intr_status |= readl(ioaddr + IntrStatus);
+ if (np->intr_status & RxResetDone)
+ break;
+ udelay(15);
+ }
+ if (i==NATSEMI_HW_TIMEOUT) {
+ printk(KERN_WARNING "%s: RX reset did not complete in %d usec.\n",
+ dev->name, i*15);
+ } else if (netif_msg_hw(np)) {
+ printk(KERN_WARNING "%s: RX reset took %d usec.\n",
+ dev->name, i*15);
+ }
+}
+
static void natsemi_reload_eeprom(struct net_device *dev)
{
struct netdev_private *np = netdev_priv(dev);
break; /* Better luck next round. */
skb->dev = dev; /* Mark as being used by this device. */
np->rx_dma[entry] = pci_map_single(np->pci_dev,
- skb->tail, buflen, PCI_DMA_FROMDEVICE);
+ skb->data, buflen, PCI_DMA_FROMDEVICE);
np->rx_ring[entry].addr = cpu_to_le32(np->rx_dma[entry]);
}
np->rx_ring[entry].cmd_status = cpu_to_le32(np->rx_buf_sz);
}
}
-/* The interrupt handler does all of the Rx thread work and cleans up
- after the Tx thread. */
+/* The interrupt handler doesn't actually handle interrupts itself, it
+ * schedules a NAPI poll if there is anything to do. */
static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *rgs)
{
struct net_device *dev = dev_instance;
struct netdev_private *np = netdev_priv(dev);
void __iomem * ioaddr = ns_ioaddr(dev);
- int boguscnt = max_interrupt_work;
- unsigned int handled = 0;
if (np->hands_off)
return IRQ_NONE;
- do {
- /* Reading automatically acknowledges all int sources. */
- u32 intr_status = readl(ioaddr + IntrStatus);
+
+ /* Reading automatically acknowledges. */
+ np->intr_status = readl(ioaddr + IntrStatus);
- if (netif_msg_intr(np))
- printk(KERN_DEBUG
- "%s: Interrupt, status %#08x, mask %#08x.\n",
- dev->name, intr_status,
- readl(ioaddr + IntrMask));
+ if (netif_msg_intr(np))
+ printk(KERN_DEBUG
+ "%s: Interrupt, status %#08x, mask %#08x.\n",
+ dev->name, np->intr_status,
+ readl(ioaddr + IntrMask));
- if (intr_status == 0)
- break;
- handled = 1;
+ if (!np->intr_status)
+ return IRQ_NONE;
- if (intr_status &
- (IntrRxDone | IntrRxIntr | RxStatusFIFOOver |
- IntrRxErr | IntrRxOverrun)) {
- netdev_rx(dev);
- }
+ prefetch(&np->rx_skbuff[np->cur_rx % RX_RING_SIZE]);
+
+ if (netif_rx_schedule_prep(dev)) {
+ /* Disable interrupts and register for poll */
+ natsemi_irq_disable(dev);
+ __netif_rx_schedule(dev);
+ }
+ return IRQ_HANDLED;
+}
- if (intr_status &
- (IntrTxDone | IntrTxIntr | IntrTxIdle | IntrTxErr)) {
+/* This is the NAPI poll routine. As well as the standard RX handling
+ * it also handles all other interrupts that the chip might raise.
+ */
+static int natsemi_poll(struct net_device *dev, int *budget)
+{
+ struct netdev_private *np = netdev_priv(dev);
+ void __iomem * ioaddr = ns_ioaddr(dev);
+
+ int work_to_do = min(*budget, dev->quota);
+ int work_done = 0;
+
+ do {
+ if (np->intr_status &
+ (IntrTxDone | IntrTxIntr | IntrTxIdle | IntrTxErr)) {
spin_lock(&np->lock);
netdev_tx_done(dev);
spin_unlock(&np->lock);
}
/* Abnormal error summary/uncommon events handlers. */
- if (intr_status & IntrAbnormalSummary)
- netdev_error(dev, intr_status);
-
- if (--boguscnt < 0) {
- if (netif_msg_intr(np))
- printk(KERN_WARNING
- "%s: Too much work at interrupt, "
- "status=%#08x.\n",
- dev->name, intr_status);
- break;
+ if (np->intr_status & IntrAbnormalSummary)
+ netdev_error(dev, np->intr_status);
+
+ if (np->intr_status &
+ (IntrRxDone | IntrRxIntr | RxStatusFIFOOver |
+ IntrRxErr | IntrRxOverrun)) {
+ netdev_rx(dev, &work_done, work_to_do);
}
- } while (1);
+
+ *budget -= work_done;
+ dev->quota -= work_done;
- if (netif_msg_intr(np))
- printk(KERN_DEBUG "%s: exiting interrupt.\n", dev->name);
+ if (work_done >= work_to_do)
+ return 1;
+
+ np->intr_status = readl(ioaddr + IntrStatus);
+ } while (np->intr_status);
+
+ netif_rx_complete(dev);
+
+ /* Reenable interrupts providing nothing is trying to shut
+ * the chip down. */
+ spin_lock(&np->lock);
+ if (!np->hands_off && netif_running(dev))
+ natsemi_irq_enable(dev);
+ spin_unlock(&np->lock);
- return IRQ_RETVAL(handled);
+ return 0;
}
/* This routine is logically part of the interrupt handler, but separated
for clarity and better register allocation. */
-static void netdev_rx(struct net_device *dev)
+static void netdev_rx(struct net_device *dev, int *work_done, int work_to_do)
{
struct netdev_private *np = netdev_priv(dev);
int entry = np->cur_rx % RX_RING_SIZE;
entry, desc_status);
if (--boguscnt < 0)
break;
+
+ if (*work_done >= work_to_do)
+ break;
+
+ (*work_done)++;
+
pkt_len = (desc_status & DescSizeMask) - 4;
if ((desc_status&(DescMore|DescPktOK|DescRxLong)) != DescPktOK){
if (desc_status & DescMore) {
"status %#08x.\n", dev->name,
np->cur_rx, desc_status);
np->stats.rx_length_errors++;
+
+ /* The RX state machine has probably
+ * locked up beneath us. Follow the
+ * reset procedure documented in
+ * AN-1287. */
+
+ spin_lock_irq(&np->lock);
+ reset_rx(dev);
+ reinit_rx(dev);
+ writel(np->ring_dma, ioaddr + RxRingPtr);
+ check_link(dev);
+ spin_unlock_irq(&np->lock);
+
+ /* We'll enable RX on exit from this
+ * function. */
+ break;
+
} else {
/* There was an error. */
np->stats.rx_errors++;
buflen,
PCI_DMA_FROMDEVICE);
eth_copy_and_sum(skb,
- np->rx_skbuff[entry]->tail, pkt_len, 0);
+ np->rx_skbuff[entry]->data, pkt_len, 0);
skb_put(skb, pkt_len);
pci_dma_sync_single_for_device(np->pci_dev,
np->rx_dma[entry],
np->rx_skbuff[entry] = NULL;
}
skb->protocol = eth_type_trans(skb, dev);
- netif_rx(skb);
+ netif_receive_skb(skb);
dev->last_rx = jiffies;
np->stats.rx_packets++;
np->stats.rx_bytes += pkt_len;
static int get_eeprom_len(struct net_device *dev)
{
- return NATSEMI_EEPROM_SIZE;
+ struct netdev_private *np = netdev_priv(dev);
+ return np->eeprom_size;
}
static int get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, u8 *data)
{
struct netdev_private *np = netdev_priv(dev);
- u8 eebuf[NATSEMI_EEPROM_SIZE];
+ u8 *eebuf;
int res;
+ eebuf = kmalloc(np->eeprom_size, GFP_KERNEL);
+ if (!eebuf)
+ return -ENOMEM;
+
eeprom->magic = PCI_VENDOR_ID_NS | (PCI_DEVICE_ID_NS_83815<<16);
spin_lock_irq(&np->lock);
res = netdev_get_eeprom(dev, eebuf);
spin_unlock_irq(&np->lock);
if (!res)
memcpy(data, eebuf+eeprom->offset, eeprom->len);
+ kfree(eebuf);
return res;
}
int i;
u16 *ebuf = (u16 *)buf;
void __iomem * ioaddr = ns_ioaddr(dev);
+ struct netdev_private *np = netdev_priv(dev);
/* eeprom_read reads 16 bits, and indexes by 16 bits */
- for (i = 0; i < NATSEMI_EEPROM_SIZE/2; i++) {
+ for (i = 0; i < np->eeprom_size/2; i++) {
ebuf[i] = eeprom_read(ioaddr, i);
/* The EEPROM itself stores data bit-swapped, but eeprom_read
* reads it back "sanely". So we swap it back here in order to
del_timer_sync(&np->timer);
disable_irq(dev->irq);
spin_lock_irq(&np->lock);
- /* Disable interrupts, and flush posted writes */
- writel(0, ioaddr + IntrEnable);
- readl(ioaddr + IntrEnable);
+ natsemi_irq_disable(dev);
np->hands_off = 1;
spin_unlock_irq(&np->lock);
enable_irq(dev->irq);
* * netdev_timer: timer stopped by natsemi_suspend.
* * intr_handler: doesn't acquire the spinlock. suspend calls
* disable_irq() to enforce synchronization.
+ * * natsemi_poll: checks before reenabling interrupts. suspend
+ * sets hands_off, disables interrupts and then waits with
+ * netif_poll_disable().
*
* Interrupts must be disabled, otherwise hands_off can cause irq storms.
*/
spin_unlock_irq(&np->lock);
enable_irq(dev->irq);
+ netif_poll_disable(dev);
+
/* Update the error counts. */
__get_stats(dev);
mod_timer(&np->timer, jiffies + 1*HZ);
}
netif_device_attach(dev);
+ netif_poll_enable(dev);
out:
rtnl_unlock();
return 0;
git://git.onelab.eu / linux-2.6.git / blobdiff