fedora core 6 1.2949 + vserver 2.2.0

[linux-2.6.git] / drivers / net / ne-h8300.c

diff --git a/drivers/net/ne-h8300.c b/drivers/net/ne-h8300.c
index 8f40368..38fd525 100644 (file)
--- a/drivers/net/ne-h8300.c
+++ b/drivers/net/ne-h8300.c
@@ -27,11 +27,14 @@ static const char version1[] =
 #include <linux/delay.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
+#include <linux/jiffies.h>
 
 #include <asm/system.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
+#define EI_SHIFT(x)    (ei_local->reg_offset[x])
+
 #include "8390.h"
 
 #define DRV_NAME "ne-h8300"
@@ -51,6 +54,11 @@ static const char version1[] =
 
 /* ---- No user-serviceable parts below ---- */
 
+static const char version[] =
+    "8390.c:v1.10cvs 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
+
+#include "lib8390.c"
+
 #define NE_BASE         (dev->base_addr)
 #define NE_CMD         0x00
 #define NE_DATAPORT    (ei_status.word16?0x20:0x10)    /* NatSemi-defined port window offset. */
@@ -161,7 +169,7 @@ static void cleanup_card(struct net_device *dev)
 #ifndef MODULE
 struct net_device * __init ne_probe(int unit)
 {
-       struct net_device *dev = alloc_ei_netdev();
+       struct net_device *dev = ____alloc_ei_netdev(0);
        int err;
 
        if (!dev)
@@ -282,7 +290,7 @@ static int __init ne_probe1(struct net_device *dev, int ioaddr)
 
        /* Snarf the interrupt now.  There's no point in waiting since we cannot
           share and the board will usually be enabled. */
-       ret = request_irq(dev->irq, ei_interrupt, 0, name, dev);
+       ret = request_irq(dev->irq, __ei_interrupt, 0, name, dev);
        if (ret) {
                printk (" unable to get IRQ %d (errno=%d).\n", dev->irq, ret);
                goto err_out;
@@ -317,9 +325,9 @@ static int __init ne_probe1(struct net_device *dev, int ioaddr)
        dev->open = &ne_open;
        dev->stop = &ne_close;
 #ifdef CONFIG_NET_POLL_CONTROLLER
-       dev->poll_controller = ei_poll;
+       dev->poll_controller = __ei_poll;
 #endif
-       NS8390_init(dev, 0);
+       __NS8390_init(dev, 0);
 
        ret = register_netdev(dev);
        if (ret)
@@ -334,7 +342,7 @@ err_out:
 
 static int ne_open(struct net_device *dev)
 {
-       ei_open(dev);
+       __ei_open(dev);
        return 0;
 }
 
@@ -342,7 +350,7 @@ static int ne_close(struct net_device *dev)
 {
        if (ei_debug > 1)
                printk(KERN_DEBUG "%s: Shutting down ethercard.\n", dev->name);
-       ei_close(dev);
+       __ei_close(dev);
        return 0;
 }
 
@@ -365,7 +373,7 @@ static void ne_reset_8390(struct net_device *dev)
 
        /* This check _should_not_ be necessary, omit eventually. */
        while ((inb_p(NE_BASE+EN0_ISR) & ENISR_RESET) == 0)
-               if (jiffies - reset_start_time > 2*HZ/100) {
+               if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
                        printk(KERN_WARNING "%s: ne_reset_8390() did not complete.\n", dev->name);
                        break;
                }
@@ -580,10 +588,10 @@ retry:
 #endif
 
        while ((inb_p(NE_BASE + EN0_ISR) & ENISR_RDC) == 0)
-               if (jiffies - dma_start > 2*HZ/100) {           /* 20ms */
+               if (time_after(jiffies, dma_start + 2*HZ/100)) {                /* 20ms */
                        printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name);
                        ne_reset_8390(dev);
-                       NS8390_init(dev,1);
+                       __NS8390_init(dev,1);
                        break;
                }
 
@@ -592,7 +600,7 @@ retry:
        return;
 }
 
-\f
+
 #ifdef MODULE
 #define MAX_NE_CARDS   1       /* Max number of NE cards per module */
 static struct net_device *dev_ne[MAX_NE_CARDS];
@@ -600,9 +608,9 @@ static int io[MAX_NE_CARDS];
 static int irq[MAX_NE_CARDS];
 static int bad[MAX_NE_CARDS];  /* 0xbad = bad sig or no reset ack */
 
-MODULE_PARM(io, "1-" __MODULE_STRING(MAX_NE_CARDS) "i");
-MODULE_PARM(irq, "1-" __MODULE_STRING(MAX_NE_CARDS) "i");
-MODULE_PARM(bad, "1-" __MODULE_STRING(MAX_NE_CARDS) "i");
+module_param_array(io, int, NULL, 0);
+module_param_array(irq, int, NULL, 0);
+module_param_array(bad, int, NULL, 0);
 MODULE_PARM_DESC(io, "I/O base address(es)");
 MODULE_PARM_DESC(irq, "IRQ number(s)");
 MODULE_DESCRIPTION("H8/300 NE2000 Ethernet driver");
@@ -619,7 +627,7 @@ int init_module(void)
        int err;
 
        for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) {
-               struct net_device *dev = alloc_ei_netdev();
+               struct net_device *dev = ____alloc_ei_netdev(0);
                if (!dev)
                        break;
                if (io[this_dev]) {