/* ni5010.c: A network driver for the MiCom-Interlan NI5010 ethercard.
*
- * Copyright 1996,1997,2006 Jan-Pascal van Best and Andreas Mohr.
+ * Copyright 1996,1997 Jan-Pascal van Best and Andreas Mohr.
*
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
*
* The authors may be reached as:
- * janpascal@vanbest.org andi@lisas.de
+ * jvbest@wi.leidenuniv.nl a.mohr@mailto.de
+ * or by snail mail as
+ * Jan-Pascal van Best Andreas Mohr
+ * Klikspaanweg 58-4 Stauferstr. 6
+ * 2324 LZ Leiden D-71272 Renningen
+ * The Netherlands Germany
*
* Sources:
* Donald Becker's "skeleton.c"
* 970503 v0.93: Fixed auto-irq failure on warm reboot (JB)
* 970623 v1.00: First kernel version (AM)
* 970814 v1.01: Added detection of onboard receive buffer size (AM)
- * 060611 v1.02: slight cleanup: email addresses, driver modernization.
* Bugs:
- * - not SMP-safe (no locking of I/O accesses)
+ * - None known...
* - Note that you have to patch ifconfig for the new /proc/net/dev
* format. It gives incorrect stats otherwise.
*
* Complete merge with Andreas' driver
* Implement ring buffers (Is this useful? You can't squeeze
* too many packet in a 2k buffer!)
- * Implement DMA (Again, is this useful? Some docs say DMA is
+ * Implement DMA (Again, is this useful? Some docs says DMA is
* slower than programmed I/O)
*
* Compile with:
* -DMODULE -c ni5010.c
*
* Insert with e.g.:
- * insmod ni5010.ko io=0x300 irq=5
+ * insmod ni5010.o io=0x300 irq=5
*/
#include <linux/module.h>
#include "ni5010.h"
-static const char boardname[] = "NI5010";
-static char version[] __initdata =
- "ni5010.c: v1.02 20060611 Jan-Pascal van Best and Andreas Mohr\n";
+static const char *boardname = "NI5010";
+static char *version =
+ "ni5010.c: v1.00 06/23/97 Jan-Pascal van Best and Andreas Mohr\n";
/* bufsize_rcv == 0 means autoprobing */
static unsigned int bufsize_rcv;
-#define JUMPERED_INTERRUPTS /* IRQ line jumpered on board */
-#undef JUMPERED_DMA /* No DMA used */
+#define jumpered_interrupts /* IRQ line jumpered on board */
+#undef jumpered_dma /* No DMA used */
#undef FULL_IODETECT /* Only detect in portlist */
#ifndef FULL_IODETECT
PRINTK2((KERN_DEBUG "%s: I/O #4 passed!\n", dev->name));
-#ifdef JUMPERED_INTERRUPTS
+#ifdef jumpered_interrupts
if (dev->irq == 0xff)
;
else if (dev->irq < 2) {
} else if (dev->irq == 2) {
dev->irq = 9;
}
-#endif /* JUMPERED_INTERRUPTS */
+#endif /* jumpered_irq */
PRINTK2((KERN_DEBUG "%s: I/O #9 passed!\n", dev->name));
/* DMA is not supported (yet?), so no use detecting it */
outw(0, IE_GP); /* Point GP at start of packet */
outb(0, IE_RBUF); /* set buffer byte 0 to 0 again */
}
- printk("-> bufsize rcv/xmt=%d/%d\n", bufsize_rcv, NI5010_BUFSIZE);
+ printk("// bufsize rcv/xmt=%d/%d\n", bufsize_rcv, NI5010_BUFSIZE);
memset(dev->priv, 0, sizeof(struct ni5010_local));
dev->open = ni5010_open;
outb(0xff, EDLC_XCLR); /* Kill all pending xmt interrupts */
printk(KERN_INFO "%s: NI5010 found at 0x%x, using IRQ %d", dev->name, ioaddr, dev->irq);
- if (dev->dma)
- printk(" & DMA %d", dev->dma);
+ if (dev->dma) printk(" & DMA %d", dev->dma);
printk(".\n");
+
+ printk(KERN_INFO "Join the NI5010 driver development team!\n");
+ printk(KERN_INFO "Mail to a.mohr@mailto.de or jvbest@wi.leidenuniv.nl\n");
return 0;
out:
release_region(dev->base_addr, NI5010_IO_EXTENT);
*
* This routine should set everything up anew at each open, even
* registers that "should" only need to be set once at boot, so that
- * there is a non-reboot way to recover if something goes wrong.
+ * there is non-reboot way to recover if something goes wrong.
*/
static int ni5010_open(struct net_device *dev)
* Always allocate the DMA channel after the IRQ,
* and clean up on failure.
*/
-#ifdef JUMPERED_DMA
+#ifdef jumpered_dma
if (request_dma(dev->dma, cardname)) {
printk(KERN_WARNING "%s: Cannot get dma %#2x\n", dev->name, dev->dma);
free_irq(dev->irq, NULL);
return -EAGAIN;
}
-#endif /* JUMPERED_DMA */
+#endif /* jumpered_dma */
PRINTK3((KERN_DEBUG "%s: passed open() #2\n", dev->name));
/* Reset the hardware here. Don't forget to set the station address. */
int ioaddr = dev->base_addr;
PRINTK2((KERN_DEBUG "%s: entering ni5010_close\n", dev->name));
-#ifdef JUMPERED_INTERRUPTS
+#ifdef jumpered_interrupts
free_irq(dev->irq, NULL);
#endif
/* Put card in held-RESET state */
#ifdef MODULE
static struct net_device *dev_ni5010;
-module_param(io, int, 0);
-module_param(irq, int, 0);
+MODULE_PARM(io, "i");
+MODULE_PARM(irq, "i");
MODULE_PARM_DESC(io, "ni5010 I/O base address");
MODULE_PARM_DESC(irq, "ni5010 IRQ number");
-static int __init ni5010_init_module(void)
+int init_module(void)
{
PRINTK2((KERN_DEBUG "%s: entering init_module\n", boardname));
/*
return 0;
}
-static void __exit ni5010_cleanup_module(void)
+void cleanup_module(void)
{
PRINTK2((KERN_DEBUG "%s: entering cleanup_module\n", boardname));
unregister_netdev(dev_ni5010);
release_region(dev_ni5010->base_addr, NI5010_IO_EXTENT);
free_netdev(dev_ni5010);
}
-module_init(ni5010_init_module);
-module_exit(ni5010_cleanup_module);
#endif /* MODULE */
MODULE_LICENSE("GPL");
git://git.onelab.eu / linux-2.6.git / blobdiff