/* this allows displaying full adapter information */
-char *channel_def[] __devinitdata = { "ISA", "MCA", "ISA P&P" };
+static char *channel_def[] __devinitdata = { "ISA", "MCA", "ISA P&P" };
static char pcchannelid[] __devinitdata = {
0x05, 0x00, 0x04, 0x09,
0x03, 0x08, 0x02, 0x00
};
-char __devinit *adapter_def(char type)
+static char __devinit *adapter_def(char type)
{
switch (type) {
case 0xF: return "PC Adapter | PC Adapter II | Adapter/A";
#define TRC_INIT 0x01 /* Trace initialization & PROBEs */
#define TRC_INITV 0x02 /* verbose init trace points */
-unsigned char ibmtr_debug_trace = 0;
+static unsigned char ibmtr_debug_trace = 0;
static int ibmtr_probe(struct net_device *dev);
static int ibmtr_probe1(struct net_device *dev, int ioaddr);
static int trdev_init(struct net_device *dev);
static int tok_open(struct net_device *dev);
static int tok_init_card(struct net_device *dev);
-void tok_open_adapter(unsigned long dev_addr);
+static void tok_open_adapter(unsigned long dev_addr);
static void open_sap(unsigned char type, struct net_device *dev);
static void tok_set_multicast_list(struct net_device *dev);
static int tok_send_packet(struct sk_buff *skb, struct net_device *dev);
static int tok_close(struct net_device *dev);
-irqreturn_t tok_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static irqreturn_t tok_interrupt(int irq, void *dev_id, struct pt_regs *regs);
static void initial_tok_int(struct net_device *dev);
static void tr_tx(struct net_device *dev);
static void tr_rx(struct net_device *dev);
-void ibmtr_reset_timer(struct timer_list*tmr,struct net_device *dev);
+static void ibmtr_reset_timer(struct timer_list*tmr,struct net_device *dev);
static void tok_rerun(unsigned long dev_addr);
-void ibmtr_readlog(struct net_device *dev);
+static void ibmtr_readlog(struct net_device *dev);
static struct net_device_stats *tok_get_stats(struct net_device *dev);
-int ibmtr_change_mtu(struct net_device *dev, int mtu);
+static int ibmtr_change_mtu(struct net_device *dev, int mtu);
static void find_turbo_adapters(int *iolist);
static int ibmtr_portlist[IBMTR_MAX_ADAPTERS+1] __devinitdata = {
if (dev->base_addr) {
outb(0,dev->base_addr+ADAPTRESET);
- schedule_timeout(TR_RST_TIME); /* wait 50ms */
+ schedule_timeout_uninterruptible(TR_RST_TIME); /* wait 50ms */
outb(0,dev->base_addr+ADAPTRESETREL);
}
if (!time_after(jiffies, timeout)) continue;
DPRINTK( "Hardware timeout during initialization.\n");
iounmap(t_mmio);
- kfree(ti);
return -ENODEV;
}
ti->sram_phys =
DPRINTK("Unknown shared ram paging info %01X\n",
ti->shared_ram_paging);
iounmap(t_mmio);
- kfree(ti);
return -ENODEV;
break;
} /*end switch shared_ram_paging */
"driver limit (%05x), adapter not started.\n",
chk_base, ibmtr_mem_base + IBMTR_SHARED_RAM_SIZE);
iounmap(t_mmio);
- kfree(ti);
return -ENODEV;
} else { /* seems cool, record what we have figured out */
ti->sram_base = new_base >> 12;
DPRINTK("Could not grab irq %d. Halting Token Ring driver.\n",
irq);
iounmap(t_mmio);
- kfree(ti);
return -ENODEV;
}
/*?? Now, allocate some of the PIO PORTs for this driver.. */
DPRINTK("Could not grab PIO range. Halting driver.\n");
free_irq(dev->irq, dev);
iounmap(t_mmio);
- kfree(ti);
return -EBUSY;
}
struct tok_info *ti;
short PIOaddr;
unsigned long i;
+ wait_queue_t __wait;
+ init_waitqueue_entry(&__wait, current);
PIOaddr = dev->base_addr;
ti = (struct tok_info *) dev->priv;
writeb(~INT_ENABLE, ti->mmio + ACA_OFFSET + ACA_RESET + ISRP_EVEN);
outb(0, PIOaddr + ADAPTRESET);
- current->state=TASK_UNINTERRUPTIBLE;
- schedule_timeout(TR_RST_TIME); /* wait 50ms */
+ schedule_timeout_uninterruptible(TR_RST_TIME); /* wait 50ms */
+ add_wait_queue(&ti->wait_for_reset, &__wait);
+ set_current_state(TASK_UNINTERRUPTIBLE);
outb(0, PIOaddr + ADAPTRESETREL);
#ifdef ENABLE_PAGING
if (ti->page_mask)
writeb(SRPR_ENABLE_PAGING,ti->mmio+ACA_OFFSET+ACA_RW+SRPR_EVEN);
#endif
writeb(INT_ENABLE, ti->mmio + ACA_OFFSET + ACA_SET + ISRP_EVEN);
- i = sleep_on_timeout(&ti->wait_for_reset, 4 * HZ);
+ #warning pci posting bug
+ i = schedule_timeout(4 * HZ);
+ current->state = TASK_RUNNING;
+ remove_wait_queue(&ti->wait_for_reset, &__wait);
return i? 0 : -EAGAIN;
}
ti->sap_status = CLOSED; /* CLOSED or OPEN */
ti->open_failure = NO; /* NO or YES */
ti->open_mode = MANUAL; /* MANUAL or AUTOMATIC */
- /* 12/2000 not typical Linux, but we can use RUNNING to let us know when
- the network has crapped out or cables are disconnected. Useful because
- the IFF_UP flag stays up the whole time, until ifconfig tr0 down.
- */
- dev->flags &= ~IFF_RUNNING;
ti->sram_phys &= ~1; /* to reverse what we do in tok_close */
/* init the spinlock */
DPRINTK("Adapter is up and running\n");
return 0;
}
- current->state=TASK_INTERRUPTIBLE;
- i=schedule_timeout(TR_RETRY_INTERVAL); /* wait 30 seconds */
+ i=schedule_timeout_interruptible(TR_RETRY_INTERVAL);
+ /* wait 30 seconds */
if(i!=0) break; /*prob. a signal, like the i>24*HZ case above */
}
outb(0, dev->base_addr + ADAPTRESET);/* kill pending interrupts*/
#define DLC_MAX_SAP_OFST 32
#define DLC_MAX_STA_OFST 33
-void tok_open_adapter(unsigned long dev_addr)
+static void tok_open_adapter(unsigned long dev_addr)
{
struct net_device *dev = (struct net_device *) dev_addr;
struct tok_info *ti;
return ti->sram_virt + index;
}
-void dir_open_adapter (struct net_device *dev)
+static void dir_open_adapter (struct net_device *dev)
{
struct tok_info *ti = (struct tok_info *) dev->priv;
unsigned char ret_code;
/******************************************************************************/
-irqreturn_t tok_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t tok_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
unsigned char status;
/* unsigned char status_even ; */
ti->open_status = CLOSED;
ti->sap_status = CLOSED;
ti->open_mode = AUTOMATIC;
- dev->flags &= ~IFF_RUNNING;
+ netif_carrier_off(dev);
netif_stop_queue(dev);
ti->open_action = RESTART;
outb(0, dev->base_addr + ADAPTRESET);
break;
}
netif_wake_queue(dev);
- dev->flags |= IFF_RUNNING;/*BMS 12/2000*/
+ netif_carrier_on(dev);
break;
case DIR_INTERRUPT:
case DIR_MOD_OPEN_PARAMS:
ring_status);
if(ring_status& (REMOVE_RECV|AUTO_REMOVAL|LOBE_FAULT)){
netif_stop_queue(dev);
- dev->flags &= ~IFF_RUNNING;/*not typical Linux*/
+ netif_carrier_off(dev);
DPRINTK("Remove received, or Auto-removal error"
", or Lobe fault\n");
DPRINTK("We'll try to reopen the closed adapter"
/*****************************************************************************/
-void ibmtr_reset_timer(struct timer_list *tmr, struct net_device *dev)
+static void ibmtr_reset_timer(struct timer_list *tmr, struct net_device *dev)
{
tmr->expires = jiffies + TR_RETRY_INTERVAL;
tmr->data = (unsigned long) dev;
/*****************************************************************************/
-void ibmtr_readlog(struct net_device *dev)
+static void ibmtr_readlog(struct net_device *dev)
{
struct tok_info *ti;
/*****************************************************************************/
-int ibmtr_change_mtu(struct net_device *dev, int mtu)
+static int ibmtr_change_mtu(struct net_device *dev, int mtu)
{
struct tok_info *ti = (struct tok_info *) dev->priv;
git://git.onelab.eu / linux-2.6.git / blobdiff