--- /dev/null
+/*
+ * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ *
+ * Author: Shlomi Gridish <gridish@freescale.com>
+ *
+ * Description:
+ * UCC GETH Driver -- PHY handling
+ *
+ * Changelog:
+ * Jun 28, 2006 Li Yang <LeoLi@freescale.com>
+ * - Rearrange code and style fixes
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#include "ucc_geth.h"
+#include "ucc_geth_phy.h"
+#include <platforms/83xx/mpc8360e_pb.h>
+
+#define ugphy_printk(level, format, arg...) \
+ printk(level format "\n", ## arg)
+
+#define ugphy_dbg(format, arg...) \
+ ugphy_printk(KERN_DEBUG, format , ## arg)
+#define ugphy_err(format, arg...) \
+ ugphy_printk(KERN_ERR, format , ## arg)
+#define ugphy_info(format, arg...) \
+ ugphy_printk(KERN_INFO, format , ## arg)
+#define ugphy_warn(format, arg...) \
+ ugphy_printk(KERN_WARNING, format , ## arg)
+
+#ifdef UGETH_VERBOSE_DEBUG
+#define ugphy_vdbg ugphy_dbg
+#else
+#define ugphy_vdbg(fmt, args...) do { } while (0)
+#endif /* UGETH_VERBOSE_DEBUG */
+
+static void config_genmii_advert(struct ugeth_mii_info *mii_info);
+static void genmii_setup_forced(struct ugeth_mii_info *mii_info);
+static void genmii_restart_aneg(struct ugeth_mii_info *mii_info);
+static int gbit_config_aneg(struct ugeth_mii_info *mii_info);
+static int genmii_config_aneg(struct ugeth_mii_info *mii_info);
+static int genmii_update_link(struct ugeth_mii_info *mii_info);
+static int genmii_read_status(struct ugeth_mii_info *mii_info);
+u16 phy_read(struct ugeth_mii_info *mii_info, u16 regnum);
+void phy_write(struct ugeth_mii_info *mii_info, u16 regnum, u16 val);
+
+static u8 *bcsr_regs = NULL;
+
+/* Write value to the PHY for this device to the register at regnum, */
+/* waiting until the write is done before it returns. All PHY */
+/* configuration has to be done through the TSEC1 MIIM regs */
+void write_phy_reg(struct net_device *dev, int mii_id, int regnum, int value)
+{
+ ucc_geth_private_t *ugeth = netdev_priv(dev);
+ ucc_mii_mng_t *mii_regs;
+ enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum;
+ u32 tmp_reg;
+
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ spin_lock_irq(&ugeth->lock);
+
+ mii_regs = ugeth->mii_info->mii_regs;
+
+ /* Set this UCC to be the master of the MII managment */
+ ucc_set_qe_mux_mii_mng(ugeth->ug_info->uf_info.ucc_num);
+
+ /* Stop the MII management read cycle */
+ out_be32(&mii_regs->miimcom, 0);
+ /* Setting up the MII Mangement Address Register */
+ tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg;
+ out_be32(&mii_regs->miimadd, tmp_reg);
+
+ /* Setting up the MII Mangement Control Register with the value */
+ out_be32(&mii_regs->miimcon, (u32) value);
+
+ /* Wait till MII management write is complete */
+ while ((in_be32(&mii_regs->miimind)) & MIIMIND_BUSY)
+ cpu_relax();
+
+ spin_unlock_irq(&ugeth->lock);
+
+ udelay(10000);
+}
+
+/* Reads from register regnum in the PHY for device dev, */
+/* returning the value. Clears miimcom first. All PHY */
+/* configuration has to be done through the TSEC1 MIIM regs */
+int read_phy_reg(struct net_device *dev, int mii_id, int regnum)
+{
+ ucc_geth_private_t *ugeth = netdev_priv(dev);
+ ucc_mii_mng_t *mii_regs;
+ enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum;
+ u32 tmp_reg;
+ u16 value;
+
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ spin_lock_irq(&ugeth->lock);
+
+ mii_regs = ugeth->mii_info->mii_regs;
+
+ /* Setting up the MII Mangement Address Register */
+ tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg;
+ out_be32(&mii_regs->miimadd, tmp_reg);
+
+ /* Perform an MII management read cycle */
+ out_be32(&mii_regs->miimcom, MIIMCOM_READ_CYCLE);
+
+ /* Wait till MII management write is complete */
+ while ((in_be32(&mii_regs->miimind)) & MIIMIND_BUSY)
+ cpu_relax();
+
+ udelay(10000);
+
+ /* Read MII management status */
+ value = (u16) in_be32(&mii_regs->miimstat);
+ out_be32(&mii_regs->miimcom, 0);
+ if (value == 0xffff)
+ ugphy_warn("read wrong value : mii_id %d,mii_reg %d, base %08x",
+ mii_id, mii_reg, (u32) & (mii_regs->miimcfg));
+
+ spin_unlock_irq(&ugeth->lock);
+
+ return (value);
+}
+
+void mii_clear_phy_interrupt(struct ugeth_mii_info *mii_info)
+{
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ if (mii_info->phyinfo->ack_interrupt)
+ mii_info->phyinfo->ack_interrupt(mii_info);
+}
+
+void mii_configure_phy_interrupt(struct ugeth_mii_info *mii_info,
+ u32 interrupts)
+{
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ mii_info->interrupts = interrupts;
+ if (mii_info->phyinfo->config_intr)
+ mii_info->phyinfo->config_intr(mii_info);
+}
+
+/* Writes MII_ADVERTISE with the appropriate values, after
+ * sanitizing advertise to make sure only supported features
+ * are advertised
+ */
+static void config_genmii_advert(struct ugeth_mii_info *mii_info)
+{
+ u32 advertise;
+ u16 adv;
+
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ /* Only allow advertising what this PHY supports */
+ mii_info->advertising &= mii_info->phyinfo->features;
+ advertise = mii_info->advertising;
+
+ /* Setup standard advertisement */
+ adv = phy_read(mii_info, MII_ADVERTISE);
+ adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
+ if (advertise & ADVERTISED_10baseT_Half)
+ adv |= ADVERTISE_10HALF;
+ if (advertise & ADVERTISED_10baseT_Full)
+ adv |= ADVERTISE_10FULL;
+ if (advertise & ADVERTISED_100baseT_Half)
+ adv |= ADVERTISE_100HALF;
+ if (advertise & ADVERTISED_100baseT_Full)
+ adv |= ADVERTISE_100FULL;
+ phy_write(mii_info, MII_ADVERTISE, adv);
+}
+
+static void genmii_setup_forced(struct ugeth_mii_info *mii_info)
+{
+ u16 ctrl;
+ u32 features = mii_info->phyinfo->features;
+
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ ctrl = phy_read(mii_info, MII_BMCR);
+
+ ctrl &=
+ ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE);
+ ctrl |= BMCR_RESET;
+
+ switch (mii_info->speed) {
+ case SPEED_1000:
+ if (features & (SUPPORTED_1000baseT_Half
+ | SUPPORTED_1000baseT_Full)) {
+ ctrl |= BMCR_SPEED1000;
+ break;
+ }
+ mii_info->speed = SPEED_100;
+ case SPEED_100:
+ if (features & (SUPPORTED_100baseT_Half
+ | SUPPORTED_100baseT_Full)) {
+ ctrl |= BMCR_SPEED100;
+ break;
+ }
+ mii_info->speed = SPEED_10;
+ case SPEED_10:
+ if (features & (SUPPORTED_10baseT_Half
+ | SUPPORTED_10baseT_Full))
+ break;
+ default: /* Unsupported speed! */
+ ugphy_err("%s: Bad speed!", mii_info->dev->name);
+ break;
+ }
+
+ phy_write(mii_info, MII_BMCR, ctrl);
+}
+
+/* Enable and Restart Autonegotiation */
+static void genmii_restart_aneg(struct ugeth_mii_info *mii_info)
+{
+ u16 ctl;
+
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ ctl = phy_read(mii_info, MII_BMCR);
+ ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
+ phy_write(mii_info, MII_BMCR, ctl);
+}
+
+static int gbit_config_aneg(struct ugeth_mii_info *mii_info)
+{
+ u16 adv;
+ u32 advertise;
+
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ if (mii_info->autoneg) {
+ /* Configure the ADVERTISE register */
+ config_genmii_advert(mii_info);
+ advertise = mii_info->advertising;
+
+ adv = phy_read(mii_info, MII_1000BASETCONTROL);
+ adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP |
+ MII_1000BASETCONTROL_HALFDUPLEXCAP);
+ if (advertise & SUPPORTED_1000baseT_Half)
+ adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP;
+ if (advertise & SUPPORTED_1000baseT_Full)
+ adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP;
+ phy_write(mii_info, MII_1000BASETCONTROL, adv);
+
+ /* Start/Restart aneg */
+ genmii_restart_aneg(mii_info);
+ } else
+ genmii_setup_forced(mii_info);
+
+ return 0;
+}
+
+static int genmii_config_aneg(struct ugeth_mii_info *mii_info)
+{
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ if (mii_info->autoneg) {
+ config_genmii_advert(mii_info);
+ genmii_restart_aneg(mii_info);
+ } else
+ genmii_setup_forced(mii_info);
+
+ return 0;
+}
+
+static int genmii_update_link(struct ugeth_mii_info *mii_info)
+{
+ u16 status;
+
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ /* Do a fake read */
+ phy_read(mii_info, MII_BMSR);
+
+ /* Read link and autonegotiation status */
+ status = phy_read(mii_info, MII_BMSR);
+ if ((status & BMSR_LSTATUS) == 0)
+ mii_info->link = 0;
+ else
+ mii_info->link = 1;
+
+ /* If we are autonegotiating, and not done,
+ * return an error */
+ if (mii_info->autoneg && !(status & BMSR_ANEGCOMPLETE))
+ return -EAGAIN;
+
+ return 0;
+}
+
+static int genmii_read_status(struct ugeth_mii_info *mii_info)
+{
+ u16 status;
+ int err;
+
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ /* Update the link, but return if there
+ * was an error */
+ err = genmii_update_link(mii_info);
+ if (err)
+ return err;
+
+ if (mii_info->autoneg) {
+ status = phy_read(mii_info, MII_LPA);
+
+ if (status & (LPA_10FULL | LPA_100FULL))
+ mii_info->duplex = DUPLEX_FULL;
+ else
+ mii_info->duplex = DUPLEX_HALF;
+ if (status & (LPA_100FULL | LPA_100HALF))
+ mii_info->speed = SPEED_100;
+ else
+ mii_info->speed = SPEED_10;
+ mii_info->pause = 0;
+ }
+ /* On non-aneg, we assume what we put in BMCR is the speed,
+ * though magic-aneg shouldn't prevent this case from occurring
+ */
+
+ return 0;
+}
+
+static int marvell_init(struct ugeth_mii_info *mii_info)
+{
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ phy_write(mii_info, 0x14, 0x0cd2);
+ phy_write(mii_info, MII_BMCR,
+ phy_read(mii_info, MII_BMCR) | BMCR_RESET);
+ msleep(4000);
+
+ return 0;
+}
+
+static int marvell_config_aneg(struct ugeth_mii_info *mii_info)
+{
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ /* The Marvell PHY has an errata which requires
+ * that certain registers get written in order
+ * to restart autonegotiation */
+ phy_write(mii_info, MII_BMCR, BMCR_RESET);
+
+ phy_write(mii_info, 0x1d, 0x1f);
+ phy_write(mii_info, 0x1e, 0x200c);
+ phy_write(mii_info, 0x1d, 0x5);
+ phy_write(mii_info, 0x1e, 0);
+ phy_write(mii_info, 0x1e, 0x100);
+
+ gbit_config_aneg(mii_info);
+
+ return 0;
+}
+
+static int marvell_read_status(struct ugeth_mii_info *mii_info)
+{
+ u16 status;
+ int err;
+
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ /* Update the link, but return if there
+ * was an error */
+ err = genmii_update_link(mii_info);
+ if (err)
+ return err;
+
+ /* If the link is up, read the speed and duplex */
+ /* If we aren't autonegotiating, assume speeds
+ * are as set */
+ if (mii_info->autoneg && mii_info->link) {
+ int speed;
+ status = phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS);
+
+ /* Get the duplexity */
+ if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX)
+ mii_info->duplex = DUPLEX_FULL;
+ else
+ mii_info->duplex = DUPLEX_HALF;
+
+ /* Get the speed */
+ speed = status & MII_M1011_PHY_SPEC_STATUS_SPD_MASK;
+ switch (speed) {
+ case MII_M1011_PHY_SPEC_STATUS_1000:
+ mii_info->speed = SPEED_1000;
+ break;
+ case MII_M1011_PHY_SPEC_STATUS_100:
+ mii_info->speed = SPEED_100;
+ break;
+ default:
+ mii_info->speed = SPEED_10;
+ break;
+ }
+ mii_info->pause = 0;
+ }
+
+ return 0;
+}
+
+static int marvell_ack_interrupt(struct ugeth_mii_info *mii_info)
+{
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ /* Clear the interrupts by reading the reg */
+ phy_read(mii_info, MII_M1011_IEVENT);
+
+ return 0;
+}
+
+static int marvell_config_intr(struct ugeth_mii_info *mii_info)
+{
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
+ phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
+ else
+ phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
+
+ return 0;
+}
+
+static int cis820x_init(struct ugeth_mii_info *mii_info)
+{
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ phy_write(mii_info, MII_CIS8201_AUX_CONSTAT,
+ MII_CIS8201_AUXCONSTAT_INIT);
+ phy_write(mii_info, MII_CIS8201_EXT_CON1, MII_CIS8201_EXTCON1_INIT);
+
+ return 0;
+}
+
+static int cis820x_read_status(struct ugeth_mii_info *mii_info)
+{
+ u16 status;
+ int err;
+
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ /* Update the link, but return if there
+ * was an error */
+ err = genmii_update_link(mii_info);
+ if (err)
+ return err;
+
+ /* If the link is up, read the speed and duplex */
+ /* If we aren't autonegotiating, assume speeds
+ * are as set */
+ if (mii_info->autoneg && mii_info->link) {
+ int speed;
+
+ status = phy_read(mii_info, MII_CIS8201_AUX_CONSTAT);
+ if (status & MII_CIS8201_AUXCONSTAT_DUPLEX)
+ mii_info->duplex = DUPLEX_FULL;
+ else
+ mii_info->duplex = DUPLEX_HALF;
+
+ speed = status & MII_CIS8201_AUXCONSTAT_SPEED;
+
+ switch (speed) {
+ case MII_CIS8201_AUXCONSTAT_GBIT:
+ mii_info->speed = SPEED_1000;
+ break;
+ case MII_CIS8201_AUXCONSTAT_100:
+ mii_info->speed = SPEED_100;
+ break;
+ default:
+ mii_info->speed = SPEED_10;
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static int cis820x_ack_interrupt(struct ugeth_mii_info *mii_info)
+{
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ phy_read(mii_info, MII_CIS8201_ISTAT);
+
+ return 0;
+}
+
+static int cis820x_config_intr(struct ugeth_mii_info *mii_info)
+{
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
+ phy_write(mii_info, MII_CIS8201_IMASK, MII_CIS8201_IMASK_MASK);
+ else
+ phy_write(mii_info, MII_CIS8201_IMASK, 0);
+
+ return 0;
+}
+
+#define DM9161_DELAY 10
+
+static int dm9161_read_status(struct ugeth_mii_info *mii_info)
+{
+ u16 status;
+ int err;
+
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ /* Update the link, but return if there
+ * was an error */
+ err = genmii_update_link(mii_info);
+ if (err)
+ return err;
+
+ /* If the link is up, read the speed and duplex */
+ /* If we aren't autonegotiating, assume speeds
+ * are as set */
+ if (mii_info->autoneg && mii_info->link) {
+ status = phy_read(mii_info, MII_DM9161_SCSR);
+ if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H))
+ mii_info->speed = SPEED_100;
+ else
+ mii_info->speed = SPEED_10;
+
+ if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_10F))
+ mii_info->duplex = DUPLEX_FULL;
+ else
+ mii_info->duplex = DUPLEX_HALF;
+ }
+
+ return 0;
+}
+
+static int dm9161_config_aneg(struct ugeth_mii_info *mii_info)
+{
+ struct dm9161_private *priv = mii_info->priv;
+
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ if (0 == priv->resetdone)
+ return -EAGAIN;
+
+ return 0;
+}
+
+static void dm9161_timer(unsigned long data)
+{
+ struct ugeth_mii_info *mii_info = (struct ugeth_mii_info *)data;
+ struct dm9161_private *priv = mii_info->priv;
+ u16 status = phy_read(mii_info, MII_BMSR);
+
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ if (status & BMSR_ANEGCOMPLETE) {
+ priv->resetdone = 1;
+ } else
+ mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ);
+}
+
+static int dm9161_init(struct ugeth_mii_info *mii_info)
+{
+ struct dm9161_private *priv;
+
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ /* Allocate the private data structure */
+ priv = kmalloc(sizeof(struct dm9161_private), GFP_KERNEL);
+
+ if (NULL == priv)
+ return -ENOMEM;
+
+ mii_info->priv = priv;
+
+ /* Reset is not done yet */
+ priv->resetdone = 0;
+
+ phy_write(mii_info, MII_BMCR,
+ phy_read(mii_info, MII_BMCR) | BMCR_RESET);
+
+ phy_write(mii_info, MII_BMCR,
+ phy_read(mii_info, MII_BMCR) & ~BMCR_ISOLATE);
+
+ config_genmii_advert(mii_info);
+ /* Start/Restart aneg */
+ genmii_config_aneg(mii_info);
+
+ /* Start a timer for DM9161_DELAY seconds to wait
+ * for the PHY to be ready */
+ init_timer(&priv->timer);
+ priv->timer.function = &dm9161_timer;
+ priv->timer.data = (unsigned long)mii_info;
+ mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ);
+
+ return 0;
+}
+
+static void dm9161_close(struct ugeth_mii_info *mii_info)
+{
+ struct dm9161_private *priv = mii_info->priv;
+
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ del_timer_sync(&priv->timer);
+ kfree(priv);
+}
+
+static int dm9161_ack_interrupt(struct ugeth_mii_info *mii_info)
+{
+/* FIXME: This lines are for BUG fixing in the mpc8325.
+Remove this from here when it's fixed */
+ if (bcsr_regs == NULL)
+ bcsr_regs = (u8 *) ioremap(BCSR_PHYS_ADDR, BCSR_SIZE);
+ bcsr_regs[14] |= 0x40;
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ /* Clear the interrupts by reading the reg */
+ phy_read(mii_info, MII_DM9161_INTR);
+
+
+ return 0;
+}
+
+static int dm9161_config_intr(struct ugeth_mii_info *mii_info)
+{
+/* FIXME: This lines are for BUG fixing in the mpc8325.
+Remove this from here when it's fixed */
+ if (bcsr_regs == NULL) {
+ bcsr_regs = (u8 *) ioremap(BCSR_PHYS_ADDR, BCSR_SIZE);
+ bcsr_regs[14] &= ~0x40;
+ }
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
+ phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT);
+ else
+ phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP);
+
+ return 0;
+}
+
+/* Cicada 820x */
+static struct phy_info phy_info_cis820x = {
+ .phy_id = 0x000fc440,
+ .name = "Cicada Cis8204",
+ .phy_id_mask = 0x000fffc0,
+ .features = MII_GBIT_FEATURES,
+ .init = &cis820x_init,
+ .config_aneg = &gbit_config_aneg,
+ .read_status = &cis820x_read_status,
+ .ack_interrupt = &cis820x_ack_interrupt,
+ .config_intr = &cis820x_config_intr,
+};
+
+static struct phy_info phy_info_dm9161 = {
+ .phy_id = 0x0181b880,
+ .phy_id_mask = 0x0ffffff0,
+ .name = "Davicom DM9161E",
+ .init = dm9161_init,
+ .config_aneg = dm9161_config_aneg,
+ .read_status = dm9161_read_status,
+ .close = dm9161_close,
+};
+
+static struct phy_info phy_info_dm9161a = {
+ .phy_id = 0x0181b8a0,
+ .phy_id_mask = 0x0ffffff0,
+ .name = "Davicom DM9161A",
+ .features = MII_BASIC_FEATURES,
+ .init = dm9161_init,
+ .config_aneg = dm9161_config_aneg,
+ .read_status = dm9161_read_status,
+ .ack_interrupt = dm9161_ack_interrupt,
+ .config_intr = dm9161_config_intr,
+ .close = dm9161_close,
+};
+
+static struct phy_info phy_info_marvell = {
+ .phy_id = 0x01410c00,
+ .phy_id_mask = 0xffffff00,
+ .name = "Marvell 88E11x1",
+ .features = MII_GBIT_FEATURES,
+ .init = &marvell_init,
+ .config_aneg = &marvell_config_aneg,
+ .read_status = &marvell_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+};
+
+static struct phy_info phy_info_genmii = {
+ .phy_id = 0x00000000,
+ .phy_id_mask = 0x00000000,
+ .name = "Generic MII",
+ .features = MII_BASIC_FEATURES,
+ .config_aneg = genmii_config_aneg,
+ .read_status = genmii_read_status,
+};
+
+static struct phy_info *phy_info[] = {
+ &phy_info_cis820x,
+ &phy_info_marvell,
+ &phy_info_dm9161,
+ &phy_info_dm9161a,
+ &phy_info_genmii,
+ NULL
+};
+
+u16 phy_read(struct ugeth_mii_info *mii_info, u16 regnum)
+{
+ u16 retval;
+ unsigned long flags;
+
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ spin_lock_irqsave(&mii_info->mdio_lock, flags);
+ retval = mii_info->mdio_read(mii_info->dev, mii_info->mii_id, regnum);
+ spin_unlock_irqrestore(&mii_info->mdio_lock, flags);
+
+ return retval;
+}
+
+void phy_write(struct ugeth_mii_info *mii_info, u16 regnum, u16 val)
+{
+ unsigned long flags;
+
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ spin_lock_irqsave(&mii_info->mdio_lock, flags);
+ mii_info->mdio_write(mii_info->dev, mii_info->mii_id, regnum, val);
+ spin_unlock_irqrestore(&mii_info->mdio_lock, flags);
+}
+
+/* Use the PHY ID registers to determine what type of PHY is attached
+ * to device dev. return a struct phy_info structure describing that PHY
+ */
+struct phy_info *get_phy_info(struct ugeth_mii_info *mii_info)
+{
+ u16 phy_reg;
+ u32 phy_ID;
+ int i;
+ struct phy_info *theInfo = NULL;
+ struct net_device *dev = mii_info->dev;
+
+ ugphy_vdbg("%s: IN", __FUNCTION__);
+
+ /* Grab the bits from PHYIR1, and put them in the upper half */
+ phy_reg = phy_read(mii_info, MII_PHYSID1);
+ phy_ID = (phy_reg & 0xffff) << 16;
+
+ /* Grab the bits from PHYIR2, and put them in the lower half */
+ phy_reg = phy_read(mii_info, MII_PHYSID2);
+ phy_ID |= (phy_reg & 0xffff);
+
+ /* loop through all the known PHY types, and find one that */
+ /* matches the ID we read from the PHY. */
+ for (i = 0; phy_info[i]; i++)
+ if (phy_info[i]->phy_id == (phy_ID & phy_info[i]->phy_id_mask)){
+ theInfo = phy_info[i];
+ break;
+ }
+
+ /* This shouldn't happen, as we have generic PHY support */
+ if (theInfo == NULL) {
+ ugphy_info("%s: PHY id %x is not supported!", dev->name,
+ phy_ID);
+ return NULL;
+ } else {
+ ugphy_info("%s: PHY is %s (%x)", dev->name, theInfo->name,
+ phy_ID);
+ }
+
+ return theInfo;
+}
git://git.onelab.eu / linux-2.6.git / blobdiff