* A short common prefix is useful for routines within the driver to avoid
* conflict with other similar drivers and I chosen to use "fst_" for this
* purpose (FarSite T-series).
+ *
+ * Finally the device driver needs a short network interface name. Since
+ * "hdlc" is already in use I've chosen the even less informative "sync"
+ * for the present.
*/
#define FST_NAME "fst" /* In debug/info etc */
+#define FST_NDEV_NAME "sync" /* For net interface */
#define FST_DEV_NAME "farsync" /* For misc interfaces */
* have individual versions (or IDs) that move much faster than the
* the release version as individual updates are tracked.
*/
-#define FST_USER_VERSION "0.09"
+#define FST_USER_VERSION "1.04"
/* Ioctl call command values
unsigned int state; /* State of card */
unsigned int index; /* Index of port ioctl was issued on */
unsigned int smcFirmwareVersion;
+ unsigned long kernelVersion; /* What Kernel version we are working with */
unsigned short lineInterface; /* Physical interface type */
unsigned char proto; /* Line protocol */
unsigned char internalClock; /* 1 => internal clock, 0 => external */
unsigned short cableStatus; /* lsb: 0=> present, 1=> absent */
unsigned short cardMode; /* lsb: LED id mode */
unsigned short debug; /* Debug flags */
+ unsigned char transparentMode; /* Not used always 0 */
+ unsigned char invertClock; /* Invert clock feature for syncing */
+ unsigned char startingSlot; /* Time slot to use for start of tx */
+ unsigned char clockSource; /* External or internal */
+ unsigned char framing; /* E1, T1 or J1 */
+ unsigned char structure; /* unframed, double, crc4, f4, f12, */
+ /* f24 f72 */
+ unsigned char interface; /* rj48c or bnc */
+ unsigned char coding; /* hdb3 b8zs */
+ unsigned char lineBuildOut; /* 0, -7.5, -15, -22 */
+ unsigned char equalizer; /* short or lon haul settings */
+ unsigned char loopMode; /* various loopbacks */
+ unsigned char range; /* cable lengths */
+ unsigned char txBufferMode; /* tx elastic buffer depth */
+ unsigned char rxBufferMode; /* rx elastic buffer depth */
+ unsigned char losThreshold; /* Attenuation on LOS signal */
+ unsigned char idleCode; /* Value to send as idle timeslot */
+ unsigned int receiveBufferDelay; /* delay thro rx buffer timeslots */
+ unsigned int framingErrorCount; /* framing errors */
+ unsigned int codeViolationCount; /* code violations */
+ unsigned int crcErrorCount; /* CRC errors */
+ int lineAttenuation; /* in dB*/
+ unsigned short lossOfSignal;
+ unsigned short receiveRemoteAlarm;
+ unsigned short alarmIndicationSignal;
};
/* "valid" bitmask */
*/
#define FSTVAL_PROTO 0x00000200 /* proto */
#define FSTVAL_MODE 0x00000400 /* cardMode */
+#define FSTVAL_PHASE 0x00000800 /* Clock phase */
+#define FSTVAL_TE1 0x00001000 /* T1E1 Configuration */
#define FSTVAL_DEBUG 0x80000000 /* debug */
-#define FSTVAL_ALL 0x000007FF /* Note: does not include DEBUG flag */
+#define FSTVAL_ALL 0x00001FFF /* Note: does not include DEBUG flag */
/* "type" */
#define FST_TYPE_NONE 0 /* Probably should never happen */
#define FST_TYPE_T2P 1 /* T2P X21 2 port card */
#define FST_TYPE_T4P 2 /* T4P X21 4 port card */
+#define FST_TYPE_T1U 3 /* T1U X21 1 port card */
+#define FST_TYPE_T2U 4 /* T2U X21 2 port card */
+#define FST_TYPE_T4U 5 /* T4U X21 4 port card */
+#define FST_TYPE_TE1 6 /* T1E1 X21 1 port card */
+
+/* "family" */
+#define FST_FAMILY_TXP 0 /* T2P or T4P */
+#define FST_FAMILY_TXU 1 /* T1U or T2U or T4U */
/* "state" */
#define FST_UNINIT 0 /* Raw uninitialised state following
#define V24 1
#define X21 2
#define V35 3
+#define X21D 4
+#define T1 5
+#define E1 6
+#define J1 7
/* "proto" */
#define FST_HDLC 1 /* Cisco compatible HDLC */
/* "cardMode" bitmask */
#define CARD_MODE_IDENTIFY 0x0001
+/*
+ * Constants for T1/E1 configuration
+ */
+
+/*
+ * Clock source
+ */
+#define CLOCKING_SLAVE 0
+#define CLOCKING_MASTER 1
+
+/*
+ * Framing
+ */
+#define FRAMING_E1 0
+#define FRAMING_J1 1
+#define FRAMING_T1 2
+
+/*
+ * Structure
+ */
+#define STRUCTURE_UNFRAMED 0
+#define STRUCTURE_E1_DOUBLE 1
+#define STRUCTURE_E1_CRC4 2
+#define STRUCTURE_E1_CRC4M 3
+#define STRUCTURE_T1_4 4
+#define STRUCTURE_T1_12 5
+#define STRUCTURE_T1_24 6
+#define STRUCTURE_T1_72 7
+
+/*
+ * Interface
+ */
+#define INTERFACE_RJ48C 0
+#define INTERFACE_BNC 1
+
+/*
+ * Coding
+ */
+
+#define CODING_HDB3 0
+#define CODING_NRZ 1
+#define CODING_CMI 2
+#define CODING_CMI_HDB3 3
+#define CODING_CMI_B8ZS 4
+#define CODING_AMI 5
+#define CODING_AMI_ZCS 6
+#define CODING_B8ZS 7
+
+/*
+ * Line Build Out
+ */
+#define LBO_0dB 0
+#define LBO_7dB5 1
+#define LBO_15dB 2
+#define LBO_22dB5 3
+
+/*
+ * Range for long haul t1 > 655ft
+ */
+#define RANGE_0_133_FT 0
+#define RANGE_0_40_M RANGE_0_133_FT
+#define RANGE_133_266_FT 1
+#define RANGE_40_81_M RANGE_133_266_FT
+#define RANGE_266_399_FT 2
+#define RANGE_81_122_M RANGE_266_399_FT
+#define RANGE_399_533_FT 3
+#define RANGE_122_162_M RANGE_399_533_FT
+#define RANGE_533_655_FT 4
+#define RANGE_162_200_M RANGE_533_655_FT
+/*
+ * Receive Equaliser
+ */
+#define EQUALIZER_SHORT 0
+#define EQUALIZER_LONG 1
+
+/*
+ * Loop modes
+ */
+#define LOOP_NONE 0
+#define LOOP_LOCAL 1
+#define LOOP_PAYLOAD_EXC_TS0 2
+#define LOOP_PAYLOAD_INC_TS0 3
+#define LOOP_REMOTE 4
+
+/*
+ * Buffer modes
+ */
+#define BUFFER_2_FRAME 0
+#define BUFFER_1_FRAME 1
+#define BUFFER_96_BIT 2
+#define BUFFER_NONE 3
/* Debug support
*
git://git.onelab.eu / linux-2.6.git / blobdiff