* project, the Linux wvlan_cs driver, Lucent's HCF-Light
* (wvlan_hcf.c) library, and the NetBSD wireless driver.
*
- * Copyright (C) 2000, David Gibson, Linuxcare Australia <hermes@gibson.dropbear.id.au>
+ * Copyright (C) 2000, David Gibson, Linuxcare Australia.
+ * (C) Copyright David Gibson, IBM Corp. 2001-2003.
*
* Portions taken from hfa384x.h, Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
*
/*
* Command codes
*/
-/*--- Controller Commands --------------------------*/
+/*--- Controller Commands ----------------------------*/
#define HERMES_CMD_INIT (0x0000)
#define HERMES_CMD_ENABLE (0x0001)
#define HERMES_CMD_DISABLE (0x0002)
#define HERMES_CMD_DIAG (0x0003)
-/*--- Buffer Mgmt Commands --------------------------*/
+/*--- Buffer Mgmt Commands ---------------------------*/
#define HERMES_CMD_ALLOC (0x000A)
#define HERMES_CMD_TX (0x000B)
-#define HERMES_CMD_CLRPRST (0x0012)
-/*--- Regulate Commands --------------------------*/
+/*--- Regulate Commands ------------------------------*/
#define HERMES_CMD_NOTIFY (0x0010)
#define HERMES_CMD_INQUIRE (0x0011)
-/*--- Configure Commands --------------------------*/
+/*--- Configure Commands -----------------------------*/
#define HERMES_CMD_ACCESS (0x0021)
#define HERMES_CMD_DOWNLD (0x0022)
+/*--- Serial I/O Commands ----------------------------*/
+#define HERMES_CMD_READMIF (0x0030)
+#define HERMES_CMD_WRITEMIF (0x0031)
+
/*--- Debugging Commands -----------------------------*/
-#define HERMES_CMD_MONITOR (0x0038)
-#define HERMES_MONITOR_ENABLE (0x000b)
-#define HERMES_MONITOR_DISABLE (0x000f)
+#define HERMES_CMD_TEST (0x0038)
+
+
+/* Test command arguments */
+#define HERMES_TEST_SET_CHANNEL 0x0800
+#define HERMES_TEST_MONITOR 0x0b00
+#define HERMES_TEST_STOP 0x0f00
+
+/* Authentication algorithms */
+#define HERMES_AUTH_OPEN 1
+#define HERMES_AUTH_SHARED_KEY 2
+
+/* WEP settings */
+#define HERMES_WEP_PRIVACY_INVOKED 0x0001
+#define HERMES_WEP_EXCL_UNENCRYPTED 0x0002
+#define HERMES_WEP_HOST_ENCRYPT 0x0010
+#define HERMES_WEP_HOST_DECRYPT 0x0080
+
+/* Symbol hostscan options */
+#define HERMES_HOSTSCAN_SYMBOL_5SEC 0x0001
+#define HERMES_HOSTSCAN_SYMBOL_ONCE 0x0002
+#define HERMES_HOSTSCAN_SYMBOL_PASSIVE 0x0040
+#define HERMES_HOSTSCAN_SYMBOL_BCAST 0x0080
/*
* Frame structures and constants
#define HERMES_802_3_OFFSET (14+32)
#define HERMES_802_2_OFFSET (14+32+14)
-struct hermes_rx_descriptor {
- u16 status;
- u32 time;
- u8 silence;
- u8 signal;
- u8 rate;
- u8 rxflow;
- u32 reserved;
-} __attribute__ ((packed));
-
#define HERMES_RXSTAT_ERR (0x0003)
#define HERMES_RXSTAT_BADCRC (0x0001)
#define HERMES_RXSTAT_UNDECRYPTABLE (0x0002)
#define HERMES_INQ_TALLIES (0xF100)
#define HERMES_INQ_SCAN (0xF101)
+#define HERMES_INQ_CHANNELINFO (0xF102)
+#define HERMES_INQ_HOSTSCAN (0xF103)
+#define HERMES_INQ_HOSTSCAN_SYMBOL (0xF104)
#define HERMES_INQ_LINKSTATUS (0xF200)
+#define HERMES_INQ_SEC_STAT_AGERE (0xF202)
struct hermes_tallies_frame {
u16 TxUnicastFrames;
/* Grabbed from wlan-ng - Thanks Mark... - Jean II
* This is the result of a scan inquiry command */
/* Structure describing info about an Access Point */
-struct hermes_scan_apinfo {
+struct prism2_scan_apinfo {
u16 channel; /* Channel where the AP sits */
u16 noise; /* Noise level */
u16 level; /* Signal level */
u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */
- u16 beacon_interv; /* Beacon interval ? */
- u16 capabilities; /* Capabilities ? */
+ u16 beacon_interv; /* Beacon interval */
+ u16 capabilities; /* Capabilities */
+ u16 essid_len; /* ESSID length */
u8 essid[32]; /* ESSID of the network */
u8 rates[10]; /* Bit rate supported */
- u16 proberesp_rate; /* ???? */
+ u16 proberesp_rate; /* Data rate of the response frame */
+ u16 atim; /* ATIM window time, Kus (hostscan only) */
} __attribute__ ((packed));
-/* Container */
-struct hermes_scan_frame {
- u16 rsvd; /* ??? */
- u16 scanreason; /* ??? */
- struct hermes_scan_apinfo aps[35]; /* Scan result */
+
+/* Same stuff for the Lucent/Agere card.
+ * Thanks to h1kari <h1kari AT dachb0den.com> - Jean II */
+struct agere_scan_apinfo {
+ u16 channel; /* Channel where the AP sits */
+ u16 noise; /* Noise level */
+ u16 level; /* Signal level */
+ u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */
+ u16 beacon_interv; /* Beacon interval */
+ u16 capabilities; /* Capabilities */
+ /* bits: 0-ess, 1-ibss, 4-privacy [wep] */
+ u16 essid_len; /* ESSID length */
+ u8 essid[32]; /* ESSID of the network */
} __attribute__ ((packed));
+
+/* Moustafa: Scan structure for Symbol cards */
+struct symbol_scan_apinfo {
+ u8 channel; /* Channel where the AP sits */
+ u8 unknown1; /* 8 in 2.9x and 3.9x f/w, 0 otherwise */
+ u16 noise; /* Noise level */
+ u16 level; /* Signal level */
+ u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */
+ u16 beacon_interv; /* Beacon interval */
+ u16 capabilities; /* Capabilities */
+ /* bits: 0-ess, 1-ibss, 4-privacy [wep] */
+ u16 essid_len; /* ESSID length */
+ u8 essid[32]; /* ESSID of the network */
+ u16 rates[5]; /* Bit rate supported */
+ u16 basic_rates; /* Basic rates bitmask */
+ u8 unknown2[6]; /* Always FF:FF:FF:FF:00:00 */
+ u8 unknown3[8]; /* Always 0, appeared in f/w 3.91-68 */
+} __attribute__ ((packed));
+
+union hermes_scan_info {
+ struct agere_scan_apinfo a;
+ struct prism2_scan_apinfo p;
+ struct symbol_scan_apinfo s;
+};
+
#define HERMES_LINKSTATUS_NOT_CONNECTED (0x0000)
#define HERMES_LINKSTATUS_CONNECTED (0x0001)
#define HERMES_LINKSTATUS_DISCONNECTED (0x0002)
u16 linkstatus; /* Link status */
} __attribute__ ((packed));
+struct hermes_response {
+ u16 status, resp0, resp1, resp2;
+};
+
+/* "ID" structure - used for ESSID and station nickname */
+struct hermes_idstring {
+ u16 len;
+ u16 val[16];
+} __attribute__ ((packed));
+
+struct hermes_multicast {
+ u8 addr[HERMES_MAX_MULTICAST][ETH_ALEN];
+} __attribute__ ((packed));
+
// #define HERMES_DEBUG_BUFFER 1
#define HERMES_DEBUG_BUFSIZE 4096
struct hermes_debug_entry {
#endif
} hermes_t;
-typedef struct hermes_response {
- u16 status, resp0, resp1, resp2;
-} hermes_response_t;
-
/* Register access convenience macros */
#define hermes_read_reg(hw, off) ((hw)->io_space ? \
inw((hw)->iobase + ( (off) << (hw)->reg_spacing )) : \
#define hermes_write_regn(hw, name, val) hermes_write_reg((hw), HERMES_##name, (val))
/* Function prototypes */
-void hermes_struct_init(hermes_t *hw, ulong address, int io_space, int reg_spacing);
+void hermes_struct_init(hermes_t *hw, ulong address, int io_space,
+ int reg_spacing);
int hermes_init(hermes_t *hw);
-int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, hermes_response_t *resp);
+int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
+ struct hermes_response *resp);
int hermes_allocate(hermes_t *hw, u16 size, u16 *fid);
int hermes_bap_pread(hermes_t *hw, int bap, void *buf, unsigned len,
git://git.onelab.eu / linux-2.6.git / blobdiff