* under either the MPL or the GPL. */
/*
- * v0.01 -> v0.02 - 21/3/2001 - Jean II
- * o Allow to use regular ethX device name instead of dldwdX
- * o Warning on IBSS with ESSID=any for firmware 6.06
- * o Put proper range.throughput values (optimistic)
- * o IWSPY support (IOCTL and stat gather in Rx path)
- * o Allow setting frequency in Ad-Hoc mode
- * o Disable WEP setting if !has_wep to work on old firmware
- * o Fix txpower range
- * o Start adding support for Samsung/Compaq firmware
- *
- * v0.02 -> v0.03 - 23/3/2001 - Jean II
- * o Start adding Symbol support - need to check all that
- * o Fix Prism2/Symbol WEP to accept 128 bits keys
- * o Add Symbol WEP (add authentication type)
- * o Add Prism2/Symbol rate
- * o Add PM timeout (holdover duration)
- * o Enable "iwconfig eth0 key off" and friends (toggle flags)
- * o Enable "iwconfig eth0 power unicast/all" (toggle flags)
- * o Try with an Intel card. It report firmware 1.01, behave like
- * an antiquated firmware, however on windows it says 2.00. Yuck !
- * o Workaround firmware bug in allocate buffer (Intel 1.01)
- * o Finish external renaming to orinoco...
- * o Testing with various Wavelan firmwares
- *
- * v0.03 -> v0.04 - 30/3/2001 - Jean II
- * o Update to Wireless 11 -> add retry limit/lifetime support
- * o Tested with a D-Link DWL 650 card, fill in firmware support
- * o Warning on Vcc mismatch (D-Link 3.3v card in Lucent 5v only slot)
- * o Fixed the Prism2 WEP bugs that I introduced in v0.03 :-(
- * It works on D-Link *only* after a tcpdump. Weird...
- * And still doesn't work on Intel card. Grrrr...
- * o Update the mode after a setport3
- * o Add preamble setting for Symbol cards (not yet enabled)
- * o Don't complain as much about Symbol cards...
- *
- * v0.04 -> v0.04b - 22/4/2001 - David Gibson
- * o Removed the 'eth' parameter - always use ethXX as the
- * interface name instead of dldwdXX. The other was racy
- * anyway.
- * o Clean up RID definitions in hermes.h, other cleanups
- *
- * v0.04b -> v0.04c - 24/4/2001 - Jean II
- * o Tim Hurley <timster AT seiki.bliztech.com> reported a D-Link card
- * with vendor 02 and firmware 0.08. Added in the capabilities...
- * o Tested Lucent firmware 7.28, everything works...
- *
- * v0.04c -> v0.05 - 3/5/2001 - Benjamin Herrenschmidt
- * o Spin-off Pcmcia code. This file is renamed orinoco.c,
- * and orinoco_cs.c now contains only the Pcmcia specific stuff
- * o Add Airport driver support on top of orinoco.c (see airport.c)
- *
- * v0.05 -> v0.05a - 4/5/2001 - Jean II
- * o Revert to old Pcmcia code to fix breakage of Ben's changes...
- *
- * v0.05a -> v0.05b - 4/5/2001 - Jean II
- * o add module parameter 'ignore_cis_vcc' for D-Link @ 5V
- * o D-Link firmware doesn't support multicast. We just print a few
- * error messages, but otherwise everything works...
- * o For David : set/getport3 works fine, just upgrade iwpriv...
- *
- * v0.05b -> v0.05c - 5/5/2001 - Benjamin Herrenschmidt
- * o Adapt airport.c to latest changes in orinoco.c
- * o Remove deferred power enabling code
- *
- * v0.05c -> v0.05d - 5/5/2001 - Jean II
- * o Workaround to SNAP decapsulate frame from Linksys AP
- * original patch from : Dong Liu <dliu AT research.bell-labs.com>
- * (note : the memcmp bug was mine - fixed)
- * o Remove set_retry stuff, no firmware support it (bloat--).
- *
- * v0.05d -> v0.06 - 25/5/2001 - Jean II
- * Original patch from "Hong Lin" <alin AT redhat.com>,
- * "Ian Kinner" <ikinner AT redhat.com>
- * and "David Smith" <dsmith AT redhat.com>
- * o Init of priv->tx_rate_ctrl in firmware specific section.
- * o Prism2/Symbol rate, upto should be 0xF and not 0x15. Doh !
- * o Spectrum card always need cor_reset (for every reset)
- * o Fix cor_reset to not lose bit 7 in the register
- * o flush_stale_links to remove zombie Pcmcia instances
- * o Ack previous hermes event before reset
- * Me (with my little hands)
- * o Allow orinoco.c to call cor_reset via priv->card_reset_handler
- * o Add priv->need_card_reset to toggle this feature
- * o Fix various buglets when setting WEP in Symbol firmware
- * Now, encryption is fully functional on Symbol cards. Youpi !
- *
- * v0.06 -> v0.06b - 25/5/2001 - Jean II
- * o IBSS on Symbol use port_mode = 4. Please don't ask...
- *
- * v0.06b -> v0.06c - 29/5/2001 - Jean II
- * o Show first spy address in /proc/net/wireless for IBSS mode as well
- *
- * v0.06c -> v0.06d - 6/7/2001 - David Gibson
- * o Change a bunch of KERN_INFO messages to KERN_DEBUG, as per Linus'
- * wishes to reduce the number of unnecessary messages.
- * o Removed bogus message on CRC error.
- * o Merged fixes for v0.08 Prism 2 firmware from William Waghorn
- * <willwaghorn AT yahoo.co.uk>
- * o Slight cleanup/re-arrangement of firmware detection code.
- *
- * v0.06d -> v0.06e - 1/8/2001 - David Gibson
- * o Removed some redundant global initializers (orinoco_cs.c).
- * o Added some module metadata
- *
- * v0.06e -> v0.06f - 14/8/2001 - David Gibson
- * o Wording fix to license
- * o Added a 'use_alternate_encaps' module parameter for APs which need an
- * oui of 00:00:00. We really need a better way of handling this, but
- * the module flag is better than nothing for now.
- *
- * v0.06f -> v0.07 - 20/8/2001 - David Gibson
- * o Removed BAP error retries from hermes_bap_seek(). For Tx we now
- * let the upper layers handle the retry, we retry explicitly in the
- * Rx path, but don't make as much noise about it.
- * o Firmware detection cleanups.
- *
- * v0.07 -> v0.07a - 1/10/3001 - Jean II
- * o Add code to read Symbol firmware revision, inspired by latest code
- * in Spectrum24 by Lee John Keyser-Allen - Thanks Lee !
- * o Thanks to Jared Valentine <hidden AT xmission.com> for "providing" me
- * a 3Com card with a recent firmware, fill out Symbol firmware
- * capabilities of latest rev (2.20), as well as older Symbol cards.
- * o Disable Power Management in newer Symbol firmware, the API
- * has changed (documentation needed).
- *
- * v0.07a -> v0.08 - 3/10/2001 - David Gibson
- * o Fixed a possible buffer overrun found by the Stanford checker (in
- * dldwd_ioctl_setiwencode()). Can only be called by root anyway, so not
- * a big problem.
- * o Turned has_big_wep on for Intersil cards. That's not true for all of
- * them but we should at least let the capable ones try.
- * o Wait for BUSY to clear at the beginning of hermes_bap_seek(). I
- * realized that my assumption that the driver's serialization
- * would prevent the BAP being busy on entry was possibly false, because
- * things other than seeks may make the BAP busy.
- * o Use "alternate" (oui 00:00:00) encapsulation by default.
- * Setting use_old_encaps will mimic the old behaviour, but I think we
- * will be able to eliminate this.
- * o Don't try to make __initdata const (the version string). This can't
- * work because of the way the __initdata sectioning works.
- * o Added MODULE_LICENSE tags.
- * o Support for PLX (transparent PCMCIA->PCI bridge) cards.
- * o Changed to using the new type-fascist min/max.
- *
- * v0.08 -> v0.08a - 9/10/2001 - David Gibson
- * o Inserted some missing acknowledgements/info into the Changelog.
- * o Fixed some bugs in the normalization of signal level reporting.
- * o Fixed bad bug in WEP key handling on Intersil and Symbol firmware,
- * which led to an instant crash on big-endian machines.
- *
- * v0.08a -> v0.08b - 20/11/2001 - David Gibson
- * o Lots of cleanup and bugfixes in orinoco_plx.c
- * o Cleanup to handling of Tx rate setting.
- * o Removed support for old encapsulation method.
- * o Removed old "dldwd" names.
- * o Split RID constants into a new file hermes_rid.h
- * o Renamed RID constants to match linux-wlan-ng and prism2.o
- * o Bugfixes in hermes.c
- * o Poke the PLX's INTCSR register, so it actually starts
- * generating interrupts. These cards might actually work now.
- * o Update to wireless extensions v12 (Jean II)
- * o Support for tallies and inquire command (Jean II)
- * o Airport updates for newer PPC kernels (BenH)
- *
- * v0.08b -> v0.09 - 21/12/2001 - David Gibson
- * o Some new PCI IDs for PLX cards.
- * o Removed broken attempt to do ALLMULTI reception. Just use
- * promiscuous mode instead
- * o Preliminary work for list-AP (Jean II)
- * o Airport updates from (BenH)
- * o Eliminated racy hw_ready stuff
- * o Fixed generation of fake events in irq handler. This should
- * finally kill the EIO problems (Jean II & dgibson)
- * o Fixed breakage of bitrate set/get on Agere firmware (Jean II)
- *
- * v0.09 -> v0.09a - 2/1/2002 - David Gibson
- * o Fixed stupid mistake in multicast list handling, triggering
- * a BUG()
- *
- * v0.09a -> v0.09b - 16/1/2002 - David Gibson
- * o Fixed even stupider mistake in new interrupt handling, which
- * seriously broke things on big-endian machines.
- * o Removed a bunch of redundant includes and exports.
- * o Removed a redundant MOD_{INC,DEC}_USE_COUNT pair in airport.c
- * o Don't attempt to do hardware level multicast reception on
- * Intersil firmware, just go promisc instead.
- * o Typo fixed in hermes_issue_cmd()
- * o Eliminated WIRELESS_SPY #ifdefs
- * o Status code reported on Tx exceptions
- * o Moved netif_wake_queue() from ALLOC interrupts to TX and TXEXC
- * interrupts, which should fix the timeouts we're seeing.
- *
- * v0.09b -> v0.10 - 25 Feb 2002 - David Gibson
- * o Removed nested structures used for header parsing, so the
- * driver should now work without hackery on ARM
- * o Fix for WEP handling on Intersil (Hawk Newton)
- * o Eliminated the /proc/hermes/ethXX/regs debugging file. It
- * was never very useful.
- * o Make Rx errors less noisy.
- *
- * v0.10 -> v0.11 - 5 Apr 2002 - David Gibson
- * o Laid the groundwork in hermes.[ch] for devices which map
- * into PCI memory space rather than IO space.
- * o Fixed bug in multicast handling (cleared multicast list when
- * leaving promiscuous mode).
- * o Relegated Tx error messages to debug.
- * o Cleaned up / corrected handling of allocation lengths.
- * o Set OWNSSID in IBSS mode for WinXP interoperability (jimc).
- * o Change to using alloc_etherdev() for structure allocations.
- * o Check for and drop undersized packets.
- * o Fixed a race in stopping/waking the queue. This should fix
- * the timeout problems (Pavel Roskin)
- * o Reverted to netif_wake_queue() on the ALLOC event.
- * o Fixes for recent Symbol firmwares which lack AP density
- * (Pavel Roskin).
- *
- * v0.11 -> v0.11a - 29 Apr 2002 - David Gibson
- * o Handle different register spacing, necessary for Prism 2.5
- * PCI adaptors (Steve Hill).
- * o Cleaned up initialization of card structures in orinoco_cs
- * and airport. Removed card->priv field.
- * o Make response structure optional for hermes_docmd_wait()
- * Pavel Roskin)
- * o Added PCI id for Nortel emobility to orinoco_plx.c.
- * o Cleanup to handling of Symbol's allocation bug. (Pavel Roskin)
- * o Cleanups to firmware capability detection.
- * o Arrange for orinoco_pci.c to override firmware detection.
- * We should be able to support the PCI Intersil cards now.
- * o Cleanup handling of reset_cor and hard_reset (Pavel Roskin).
- * o Remove erroneous use of USER_BAP in the TxExc handler (Jouni
- * Malinen).
- * o Makefile changes for better integration into David Hinds
- * pcmcia-cs package.
- *
- * v0.11a -> v0.11b - 1 May 2002 - David Gibson
- * o Better error reporting in orinoco_plx_init_one()
- * o Fixed multiple bad kfree() bugs introduced by the
- * alloc_orinocodev() changes.
- *
- * v0.11b -> v0.12 - 19 Jun 2002 - David Gibson
- * o Support changing the MAC address.
- * o Correct display of Intersil firmware revision numbers.
- * o Entirely revised locking scheme. Should be both simpler and
- * better.
- * o Merged some common code in orinoco_plx, orinoco_pci and
- * airport by creating orinoco_default_{open,stop,reset}()
- * which are used as the dev->open, dev->stop, priv->reset
- * callbacks if none are specified when alloc_orinocodev() is
- * called.
- * o Removed orinoco_plx_interrupt() and orinoco_pci_interrupt().
- * They didn't do anything.
- *
- * v0.12 -> v0.12a - 4 Jul 2002 - David Gibson
- * o Some rearrangement of code.
- * o Numerous fixups to locking and rest handling, particularly
- * for PCMCIA.
- * o This allows open and stop net_device methods to be in
- * orinoco.c now, rather than in the init modules.
- * o In orinoco_cs.c link->priv now points to the struct
- * net_device not to the struct orinoco_private.
- * o Added a check for undersized SNAP frames, which could cause
- * crashes.
- *
- * v0.12a -> v0.12b - 11 Jul 2002 - David Gibson
- * o Fix hw->num_init testing code, so num_init is actually
- * incremented.
- * o Fix very stupid bug in orinoco_cs which broke compile with
- * CONFIG_SMP.
- * o Squashed a warning.
- *
- * v0.12b -> v0.12c - 26 Jul 2002 - David Gibson
- * o Change to C9X style designated initializers.
- * o Add support for 3Com AirConnect PCI.
- * o No longer ignore the hard_reset argument to
- * alloc_orinocodev(). Oops.
- *
- * v0.12c -> v0.13beta1 - 13 Sep 2002 - David Gibson
- * o Revert the broken 0.12* locking scheme and go to a new yet
- * simpler scheme.
- * o Do firmware resets only in orinoco_init() and when waking
- * the card from hard sleep.
- *
- * v0.13beta1 -> v0.13 - 27 Sep 2002 - David Gibson
- * o Re-introduced full resets (via schedule_task()) on Tx
- * timeout.
- *
- * v0.13 -> v0.13a - 30 Sep 2002 - David Gibson
- * o Minor cleanups to info frame handling. Add basic support
- * for linkstatus info frames.
- * o Include required kernel headers in orinoco.h, to avoid
- * compile problems.
- *
- * v0.13a -> v0.13b - 10 Feb 2003 - David Gibson
- * o Implemented hard reset for Airport cards
- * o Experimental suspend/resume implementation for orinoco_pci
- * o Abolished /proc debugging support, replaced with a debugging
- * iwpriv. Now it's ugly and simple instead of ugly and complex.
- * o Bugfix in hermes.c if the firmware returned a record length
- * of 0, we could go clobbering memory.
- * o Bugfix in orinoco_stop() - it used to fail if hw_unavailable
- * was set, which was usually true on PCMCIA hot removes.
- * o Track LINKSTATUS messages, silently drop Tx packets before
- * we are connected (avoids confusing the firmware), and only
- * give LINKSTATUS printk()s if the status has changed.
- *
- * v0.13b -> v0.13c - 11 Mar 2003 - David Gibson
- * o Cleanup: use dev instead of priv in various places.
- * o Bug fix: Don't ReleaseConfiguration on RESET_PHYSICAL event
- * if we're in the middle of a (driver initiated) hard reset.
- * o Bug fix: ETH_ZLEN is supposed to include the header
- * (Dionysus Blazakis & Manish Karir)
- * o Convert to using workqueues instead of taskqueues (and
- * backwards compatibility macros for pre 2.5.41 kernels).
- * o Drop redundant (I think...) MOD_{INC,DEC}_USE_COUNT in
- * airport.c
- * o New orinoco_tmd.c init module from Joerg Dorchain for
- * TMD7160 based PCI to PCMCIA bridges (similar to
- * orinoco_plx.c).
- *
- * v0.13c -> v0.13d - 22 Apr 2003 - David Gibson
- * o Make hw_unavailable a counter, rather than just a flag, this
- * is necessary to avoid some races (such as a card being
- * removed in the middle of orinoco_reset().
- * o Restore Release/RequestConfiguration in the PCMCIA event handler
- * when dealing with a driver initiated hard reset. This is
- * necessary to prevent hangs due to a spurious interrupt while
- * the reset is in progress.
- * o Clear the 802.11 header when transmitting, even though we
- * don't use it. This fixes a long standing bug on some
- * firmwares, which seem to get confused if that isn't done.
- * o Be less eager to de-encapsulate SNAP frames, only do so if
- * the OUI is 00:00:00 or 00:00:f8, leave others alone. The old
- * behaviour broke CDP (Cisco Discovery Protocol).
- * o Use dev instead of priv for free_irq() as well as
- * request_irq() (oops).
- * o Attempt to reset rather than giving up if we get too many
- * IRQs.
- * o Changed semantics of __orinoco_down() so it can be called
- * safely with hw_unavailable set. It also now clears the
- * linkstatus (since we're going to have to reassociate).
- *
- * v0.13d -> v0.13e - 12 May 2003 - David Gibson
- * o Support for post-2.5.68 return values from irq handler.
- * o Fixed bug where underlength packets would be double counted
- * in the rx_dropped statistics.
- * o Provided a module parameter to suppress linkstatus messages.
- *
- * v0.13e -> v0.14alpha1 - 30 Sep 2003 - David Gibson
- * o Replaced priv->connected logic with netif_carrier_on/off()
- * calls.
- * o Remove has_ibss_any and never set the CREATEIBSS RID when
- * the ESSID is empty. Too many firmwares break if we do.
- * o 2.6 merges: Replace pdev->slot_name with pci_name(), remove
- * __devinitdata from PCI ID tables, use free_netdev().
- * o Enabled shared-key authentication for Agere firmware (from
- * Robert J. Moore <Robert.J.Moore AT allanbank.com>
- * o Move netif_wake_queue() (back) to the Tx completion from the
- * ALLOC event. This seems to prevent/mitigate the rolling
- * error -110 problems at least on some Intersil firmwares.
- * Theoretically reduces performance, but I can't measure it.
- * Patch from Andrew Tridgell <tridge AT samba.org>
- *
- * v0.14alpha1 -> v0.14alpha2 - 20 Oct 2003 - David Gibson
- * o Correctly turn off shared-key authentication when requested
- * (bugfix from Robert J. Moore).
- * o Correct airport sleep interfaces for current 2.6 kernels.
- * o Add code for key change without disabling/enabling the MAC
- * port. This is supposed to allow 802.1x to work sanely, but
- * doesn't seem to yet.
- *
* TODO
- * o New wireless extensions API (patch from Moustafa
- * Youssef, updated by Jim Carter and Pavel Roskin).
* o Handle de-encapsulation within network layer, provide 802.11
* headers (patch from Thomas 'Dent' Mirlacher)
- * o RF monitor mode support
* o Fix possible races in SPY handling.
* o Disconnect wireless extensions from fundamental configuration.
* o (maybe) Software WEP support (patch from Stano Meduna).
#define DRIVER_NAME "orinoco"
#include <linux/config.h>
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/ioport.h>
#include <linux/netdevice.h>
-#include <linux/if_arp.h>
#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
#include <linux/wireless.h>
+#include <net/iw_handler.h>
+#include <net/ieee80211.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/system.h>
-
-#include "hermes.h"
#include "hermes_rid.h"
#include "orinoco.h"
-#include "ieee802_11.h"
/********************************************************************/
/* Module information */
static int suppress_linkstatus; /* = 0 */
module_param(suppress_linkstatus, bool, 0644);
MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes");
+static int ignore_disconnect; /* = 0 */
+module_param(ignore_disconnect, int, 0644);
+MODULE_PARM_DESC(ignore_disconnect, "Don't report lost link to the network layer");
+
+static int force_monitor; /* = 0 */
+module_param(force_monitor, int, 0644);
+MODULE_PARM_DESC(force_monitor, "Allow monitor mode for all firmware versions");
/********************************************************************/
/* Compile time configuration and compatibility stuff */
/* We do this this way to avoid ifdefs in the actual code */
#ifdef WIRELESS_SPY
-#define SPY_NUMBER(priv) (priv->spy_number)
+#define SPY_NUMBER(priv) (priv->spy_data.spy_number)
#else
#define SPY_NUMBER(priv) 0
#endif /* WIRELESS_SPY */
/* Internal constants */
/********************************************************************/
+/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */
+static const u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};
+#define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2)
+
#define ORINOCO_MIN_MTU 256
-#define ORINOCO_MAX_MTU (IEEE802_11_DATA_LEN - ENCAPS_OVERHEAD)
+#define ORINOCO_MAX_MTU (IEEE80211_DATA_LEN - ENCAPS_OVERHEAD)
#define SYMBOL_MAX_VER_LEN (14)
#define USER_BAP 0
| HERMES_EV_WTERR | HERMES_EV_INFO \
| HERMES_EV_INFDROP )
+#define MAX_RID_LEN 1024
+
+static const struct iw_handler_def orinoco_handler_def;
+static struct ethtool_ops orinoco_ethtool_ops;
+
/********************************************************************/
/* Data tables */
/********************************************************************/
/* Data types */
/********************************************************************/
-struct header_struct {
- /* 802.3 */
- u8 dest[ETH_ALEN];
- u8 src[ETH_ALEN];
- u16 len;
- /* 802.2 */
+/* Used in Event handling.
+ * We avoid nested structures as they break on ARM -- Moustafa */
+struct hermes_tx_descriptor_802_11 {
+ /* hermes_tx_descriptor */
+ __le16 status;
+ __le16 reserved1;
+ __le16 reserved2;
+ __le32 sw_support;
+ u8 retry_count;
+ u8 tx_rate;
+ __le16 tx_control;
+
+ /* ieee80211_hdr */
+ __le16 frame_ctl;
+ __le16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ __le16 seq_ctl;
+ u8 addr4[ETH_ALEN];
+
+ __le16 data_len;
+
+ /* ethhdr */
+ u8 h_dest[ETH_ALEN]; /* destination eth addr */
+ u8 h_source[ETH_ALEN]; /* source ether addr */
+ __be16 h_proto; /* packet type ID field */
+
+ /* p8022_hdr */
u8 dsap;
u8 ssap;
u8 ctrl;
- /* SNAP */
u8 oui[3];
- u16 ethertype;
-} __attribute__ ((packed));
-
-/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */
-u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};
-#define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2)
+ __be16 ethertype;
+} __attribute__ ((packed));
+/* Rx frame header except compatibility 802.3 header */
struct hermes_rx_descriptor {
- u16 status;
- u32 time;
+ /* Control */
+ __le16 status;
+ __le32 time;
u8 silence;
u8 signal;
u8 rate;
u8 rxflow;
- u32 reserved;
+ __le32 reserved;
+
+ /* 802.11 header */
+ __le16 frame_ctl;
+ __le16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ __le16 seq_ctl;
+ u8 addr4[ETH_ALEN];
+
+ /* Data length */
+ __le16 data_len;
} __attribute__ ((packed));
/********************************************************************/
/* Function prototypes */
/********************************************************************/
-static int orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
static int __orinoco_program_rids(struct net_device *dev);
static void __orinoco_set_multicast_list(struct net_device *dev);
-static int orinoco_debug_dump_recs(struct net_device *dev);
/********************************************************************/
/* Internal helper functions */
priv->createibss = 1;
}
break;
+ case IW_MODE_MONITOR:
+ priv->port_type = 3;
+ priv->createibss = 0;
+ break;
default:
printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n",
priv->ndev->name);
return err;
}
-int orinoco_stop(struct net_device *dev)
+static int orinoco_stop(struct net_device *dev)
{
struct orinoco_private *priv = netdev_priv(dev);
int err = 0;
struct orinoco_private *priv = netdev_priv(dev);
hermes_t *hw = &priv->hw;
struct iw_statistics *wstats = &priv->wstats;
- int err = 0;
+ int err;
unsigned long flags;
if (! netif_device_present(dev)) {
return NULL; /* FIXME: Can we do better than this? */
}
+ /* If busy, return the old stats. Returning NULL may cause
+ * the interface to disappear from /proc/net/wireless */
if (orinoco_lock(priv, &flags) != 0)
- return NULL; /* FIXME: Erg, we've been signalled, how
- * do we propagate this back up? */
+ return wstats;
+
+ /* We can't really wait for the tallies inquiry command to
+ * complete, so we just use the previous results and trigger
+ * a new tallies inquiry command for next time - Jean II */
+ /* FIXME: Really we should wait for the inquiry to come back -
+ * as it is the stats we give don't make a whole lot of sense.
+ * Unfortunately, it's not clear how to do that within the
+ * wireless extensions framework: I think we're in user
+ * context, but a lock seems to be held by the time we get in
+ * here so we're not safe to sleep here. */
+ hermes_inquire(hw, HERMES_INQ_TALLIES);
if (priv->iw_mode == IW_MODE_ADHOC) {
memset(&wstats->qual, 0, sizeof(wstats->qual));
/* If a spy address is defined, we report stats of the
* first spy address - Jean II */
if (SPY_NUMBER(priv)) {
- wstats->qual.qual = priv->spy_stat[0].qual;
- wstats->qual.level = priv->spy_stat[0].level;
- wstats->qual.noise = priv->spy_stat[0].noise;
- wstats->qual.updated = priv->spy_stat[0].updated;
+ wstats->qual.qual = priv->spy_data.spy_stat[0].qual;
+ wstats->qual.level = priv->spy_data.spy_stat[0].level;
+ wstats->qual.noise = priv->spy_data.spy_stat[0].noise;
+ wstats->qual.updated = priv->spy_data.spy_stat[0].updated;
}
} else {
struct {
- u16 qual, signal, noise;
+ __le16 qual, signal, noise, unused;
} __attribute__ ((packed)) cq;
err = HERMES_READ_RECORD(hw, USER_BAP,
HERMES_RID_COMMSQUALITY, &cq);
-
- wstats->qual.qual = (int)le16_to_cpu(cq.qual);
- wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95;
- wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95;
- wstats->qual.updated = 7;
+
+ if (!err) {
+ wstats->qual.qual = (int)le16_to_cpu(cq.qual);
+ wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95;
+ wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95;
+ wstats->qual.updated = 7;
+ }
}
- /* We can't really wait for the tallies inquiry command to
- * complete, so we just use the previous results and trigger
- * a new tallies inquiry command for next time - Jean II */
- /* FIXME: We're in user context (I think?), so we should just
- wait for the tallies to come through */
- err = hermes_inquire(hw, HERMES_INQ_TALLIES);
-
orinoco_unlock(priv, &flags);
-
- if (err)
- return NULL;
-
return wstats;
}
if ( (new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU) )
return -EINVAL;
- if ( (new_mtu + ENCAPS_OVERHEAD + IEEE802_11_HLEN) >
+ if ( (new_mtu + ENCAPS_OVERHEAD + IEEE80211_HLEN) >
(priv->nicbuf_size - ETH_HLEN) )
return -EINVAL;
return 1;
}
- if (! netif_carrier_ok(dev)) {
+ if (! netif_carrier_ok(dev) || (priv->iw_mode == IW_MODE_MONITOR)) {
/* Oops, the firmware hasn't established a connection,
silently drop the packet (this seems to be the
safest approach). */
/* Length of the packet body */
/* FIXME: what if the skb is smaller than this? */
- len = max_t(int,skb->len - ETH_HLEN, ETH_ZLEN - ETH_HLEN);
+ len = max_t(int, ALIGN(skb->len, 2), ETH_ZLEN);
+ skb = skb_padto(skb, len);
+ if (skb == NULL)
+ goto fail;
+ len -= ETH_HLEN;
eh = (struct ethhdr *)skb->data;
stats->tx_errors++;
goto fail;
}
+ /* Actual xfer length - allow for padding */
+ len = ALIGN(data_len, 2);
+ if (len < ETH_ZLEN - ETH_HLEN)
+ len = ETH_ZLEN - ETH_HLEN;
} else { /* IEEE 802.3 frame */
data_len = len + ETH_HLEN;
data_off = HERMES_802_3_OFFSET;
p = skb->data;
+ /* Actual xfer length - round up for odd length packets */
+ len = ALIGN(data_len, 2);
+ if (len < ETH_ZLEN)
+ len = ETH_ZLEN;
}
- /* Round up for odd length packets */
- err = hermes_bap_pwrite(hw, USER_BAP, p, ALIGN(data_len, 2),
+ err = hermes_bap_pwrite_pad(hw, USER_BAP, p, data_len, len,
txfid, data_off);
if (err) {
printk(KERN_ERR "%s: Error %d writing packet to BAP\n",
txfid, NULL);
if (err) {
netif_start_queue(dev);
- printk(KERN_ERR "%s: Error %d transmitting packet\n",
- dev->name, err);
+ if (net_ratelimit())
+ printk(KERN_ERR "%s: Error %d transmitting packet\n",
+ dev->name, err);
stats->tx_errors++;
goto fail;
}
struct orinoco_private *priv = netdev_priv(dev);
struct net_device_stats *stats = &priv->stats;
u16 fid = hermes_read_regn(hw, TXCOMPLFID);
- struct hermes_tx_descriptor desc;
+ u16 status;
+ struct hermes_tx_descriptor_802_11 hdr;
int err = 0;
if (fid == DUMMY_FID)
return; /* Nothing's really happened */
- err = hermes_bap_pread(hw, IRQ_BAP, &desc, sizeof(desc), fid, 0);
+ /* Read part of the frame header - we need status and addr1 */
+ err = hermes_bap_pread(hw, IRQ_BAP, &hdr,
+ offsetof(struct hermes_tx_descriptor_802_11,
+ addr2),
+ fid, 0);
+
+ hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
+ stats->tx_errors++;
+
if (err) {
printk(KERN_WARNING "%s: Unable to read descriptor on Tx error "
"(FID=%04X error %d)\n",
dev->name, fid, err);
- } else {
- DEBUG(1, "%s: Tx error, status %d\n",
- dev->name, le16_to_cpu(desc.status));
+ return;
}
- stats->tx_errors++;
+ DEBUG(1, "%s: Tx error, err %d (FID=%04X)\n", dev->name,
+ err, fid);
+
+ /* We produce a TXDROP event only for retry or lifetime
+ * exceeded, because that's the only status that really mean
+ * that this particular node went away.
+ * Other errors means that *we* screwed up. - Jean II */
+ status = le16_to_cpu(hdr.status);
+ if (status & (HERMES_TXSTAT_RETRYERR | HERMES_TXSTAT_AGEDERR)) {
+ union iwreq_data wrqu;
+
+ /* Copy 802.11 dest address.
+ * We use the 802.11 header because the frame may
+ * not be 802.3 or may be mangled...
+ * In Ad-Hoc mode, it will be the node address.
+ * In managed mode, it will be most likely the AP addr
+ * User space will figure out how to convert it to
+ * whatever it needs (IP address or else).
+ * - Jean II */
+ memcpy(wrqu.addr.sa_data, hdr.addr1, ETH_ALEN);
+ wrqu.addr.sa_family = ARPHRD_ETHER;
+
+ /* Send event to user space */
+ wireless_send_event(dev, IWEVTXDROP, &wrqu, NULL);
+ }
netif_wake_queue(dev);
- hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
}
static void orinoco_tx_timeout(struct net_device *dev)
static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac,
int level, int noise)
{
- struct orinoco_private *priv = netdev_priv(dev);
- int i;
-
- /* Gather wireless spy statistics: for each packet, compare the
- * source address with out list, and if match, get the stats... */
- for (i = 0; i < priv->spy_number; i++)
- if (!memcmp(mac, priv->spy_address[i], ETH_ALEN)) {
- priv->spy_stat[i].level = level - 0x95;
- priv->spy_stat[i].noise = noise - 0x95;
- priv->spy_stat[i].qual = (level > noise) ? (level - noise) : 0;
- priv->spy_stat[i].updated = 7;
- }
+ struct iw_quality wstats;
+ wstats.level = level - 0x95;
+ wstats.noise = noise - 0x95;
+ wstats.qual = (level > noise) ? (level - noise) : 0;
+ wstats.updated = 7;
+ /* Update spy records */
+ wireless_spy_update(dev, mac, &wstats);
}
static void orinoco_stat_gather(struct net_device *dev,
}
}
+/*
+ * orinoco_rx_monitor - handle received monitor frames.
+ *
+ * Arguments:
+ * dev network device
+ * rxfid received FID
+ * desc rx descriptor of the frame
+ *
+ * Call context: interrupt
+ */
+static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid,
+ struct hermes_rx_descriptor *desc)
+{
+ u32 hdrlen = 30; /* return full header by default */
+ u32 datalen = 0;
+ u16 fc;
+ int err;
+ int len;
+ struct sk_buff *skb;
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &priv->stats;
+ hermes_t *hw = &priv->hw;
+
+ len = le16_to_cpu(desc->data_len);
+
+ /* Determine the size of the header and the data */
+ fc = le16_to_cpu(desc->frame_ctl);
+ switch (fc & IEEE80211_FCTL_FTYPE) {
+ case IEEE80211_FTYPE_DATA:
+ if ((fc & IEEE80211_FCTL_TODS)
+ && (fc & IEEE80211_FCTL_FROMDS))
+ hdrlen = 30;
+ else
+ hdrlen = 24;
+ datalen = len;
+ break;
+ case IEEE80211_FTYPE_MGMT:
+ hdrlen = 24;
+ datalen = len;
+ break;
+ case IEEE80211_FTYPE_CTL:
+ switch (fc & IEEE80211_FCTL_STYPE) {
+ case IEEE80211_STYPE_PSPOLL:
+ case IEEE80211_STYPE_RTS:
+ case IEEE80211_STYPE_CFEND:
+ case IEEE80211_STYPE_CFENDACK:
+ hdrlen = 16;
+ break;
+ case IEEE80211_STYPE_CTS:
+ case IEEE80211_STYPE_ACK:
+ hdrlen = 10;
+ break;
+ }
+ break;
+ default:
+ /* Unknown frame type */
+ break;
+ }
+
+ /* sanity check the length */
+ if (datalen > IEEE80211_DATA_LEN + 12) {
+ printk(KERN_DEBUG "%s: oversized monitor frame, "
+ "data length = %d\n", dev->name, datalen);
+ stats->rx_length_errors++;
+ goto update_stats;
+ }
+
+ skb = dev_alloc_skb(hdrlen + datalen);
+ if (!skb) {
+ printk(KERN_WARNING "%s: Cannot allocate skb for monitor frame\n",
+ dev->name);
+ goto update_stats;
+ }
+
+ /* Copy the 802.11 header to the skb */
+ memcpy(skb_put(skb, hdrlen), &(desc->frame_ctl), hdrlen);
+ skb->mac.raw = skb->data;
+
+ /* If any, copy the data from the card to the skb */
+ if (datalen > 0) {
+ err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, datalen),
+ ALIGN(datalen, 2), rxfid,
+ HERMES_802_2_OFFSET);
+ if (err) {
+ printk(KERN_ERR "%s: error %d reading monitor frame\n",
+ dev->name, err);
+ goto drop;
+ }
+ }
+
+ skb->dev = dev;
+ skb->ip_summed = CHECKSUM_NONE;
+ skb->pkt_type = PACKET_OTHERHOST;
+ skb->protocol = __constant_htons(ETH_P_802_2);
+
+ dev->last_rx = jiffies;
+ stats->rx_packets++;
+ stats->rx_bytes += skb->len;
+
+ netif_rx(skb);
+ return;
+
+ drop:
+ dev_kfree_skb_irq(skb);
+ update_stats:
+ stats->rx_errors++;
+ stats->rx_dropped++;
+}
+
static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw)
{
struct orinoco_private *priv = netdev_priv(dev);
struct net_device_stats *stats = &priv->stats;
struct iw_statistics *wstats = &priv->wstats;
struct sk_buff *skb = NULL;
- u16 rxfid, status;
- int length, data_len, data_off;
- char *p;
+ u16 rxfid, status, fc;
+ int length;
struct hermes_rx_descriptor desc;
- struct header_struct hdr;
- struct ethhdr *eh;
+ struct ethhdr *hdr;
int err;
rxfid = hermes_read_regn(hw, RXFID);
if (err) {
printk(KERN_ERR "%s: error %d reading Rx descriptor. "
"Frame dropped.\n", dev->name, err);
- stats->rx_errors++;
- goto drop;
+ goto update_stats;
}
status = le16_to_cpu(desc.status);
- if (status & HERMES_RXSTAT_ERR) {
- if (status & HERMES_RXSTAT_UNDECRYPTABLE) {
- wstats->discard.code++;
- DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n",
- dev->name);
- } else {
- stats->rx_crc_errors++;
- DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n", dev->name);
- }
- stats->rx_errors++;
- goto drop;
+ if (status & HERMES_RXSTAT_BADCRC) {
+ DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n",
+ dev->name);
+ stats->rx_crc_errors++;
+ goto update_stats;
}
- /* For now we ignore the 802.11 header completely, assuming
- that the card's firmware has handled anything vital */
+ /* Handle frames in monitor mode */
+ if (priv->iw_mode == IW_MODE_MONITOR) {
+ orinoco_rx_monitor(dev, rxfid, &desc);
+ return;
+ }
- err = hermes_bap_pread(hw, IRQ_BAP, &hdr, sizeof(hdr),
- rxfid, HERMES_802_3_OFFSET);
- if (err) {
- printk(KERN_ERR "%s: error %d reading frame header. "
- "Frame dropped.\n", dev->name, err);
- stats->rx_errors++;
- goto drop;
+ if (status & HERMES_RXSTAT_UNDECRYPTABLE) {
+ DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n",
+ dev->name);
+ wstats->discard.code++;
+ goto update_stats;
}
- length = ntohs(hdr.len);
-
+ length = le16_to_cpu(desc.data_len);
+ fc = le16_to_cpu(desc.frame_ctl);
+
/* Sanity checks */
if (length < 3) { /* No for even an 802.2 LLC header */
/* At least on Symbol firmware with PCF we get quite a
lot of these legitimately - Poll frames with no
data. */
- stats->rx_dropped++;
- goto drop;
+ return;
}
- if (length > IEEE802_11_DATA_LEN) {
+ if (length > IEEE80211_DATA_LEN) {
printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n",
dev->name, length);
stats->rx_length_errors++;
- stats->rx_errors++;
- goto drop;
+ goto update_stats;
}
/* We need space for the packet data itself, plus an ethernet
if (!skb) {
printk(KERN_WARNING "%s: Can't allocate skb for Rx\n",
dev->name);
- goto drop;
+ goto update_stats;
}
- skb_reserve(skb, 2); /* This way the IP header is aligned */
+ /* We'll prepend the header, so reserve space for it. The worst
+ case is no decapsulation, when 802.3 header is prepended and
+ nothing is removed. 2 is for aligning the IP header. */
+ skb_reserve(skb, ETH_HLEN + 2);
+
+ err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, length),
+ ALIGN(length, 2), rxfid,
+ HERMES_802_2_OFFSET);
+ if (err) {
+ printk(KERN_ERR "%s: error %d reading frame. "
+ "Frame dropped.\n", dev->name, err);
+ goto drop;
+ }
/* Handle decapsulation
* In most cases, the firmware tell us about SNAP frames.
* For some reason, the SNAP frames sent by LinkSys APs
* are not properly recognised by most firmwares.
* So, check ourselves */
- if (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) ||
- ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) ||
- is_ethersnap(&hdr)) {
+ if (length >= ENCAPS_OVERHEAD &&
+ (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) ||
+ ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) ||
+ is_ethersnap(skb->data))) {
/* These indicate a SNAP within 802.2 LLC within
802.11 frame which we'll need to de-encapsulate to
the original EthernetII frame. */
-
- if (length < ENCAPS_OVERHEAD) { /* No room for full LLC+SNAP */
- stats->rx_length_errors++;
- goto drop;
- }
-
- /* Remove SNAP header, reconstruct EthernetII frame */
- data_len = length - ENCAPS_OVERHEAD;
- data_off = HERMES_802_3_OFFSET + sizeof(hdr);
-
- eh = (struct ethhdr *)skb_put(skb, ETH_HLEN);
-
- memcpy(eh, &hdr, 2 * ETH_ALEN);
- eh->h_proto = hdr.ethertype;
+ hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN - ENCAPS_OVERHEAD);
} else {
- /* All other cases indicate a genuine 802.3 frame. No
- decapsulation needed. We just throw the whole
- thing in, and hope the protocol layer can deal with
- it as 802.3 */
- data_len = length;
- data_off = HERMES_802_3_OFFSET;
- /* FIXME: we re-read from the card data we already read here */
- }
-
- p = skb_put(skb, data_len);
- err = hermes_bap_pread(hw, IRQ_BAP, p, ALIGN(data_len, 2),
- rxfid, data_off);
- if (err) {
- printk(KERN_ERR "%s: error %d reading frame. "
- "Frame dropped.\n", dev->name, err);
- stats->rx_errors++;
- goto drop;
+ /* 802.3 frame - prepend 802.3 header as is */
+ hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN);
+ hdr->h_proto = htons(length);
}
+ memcpy(hdr->h_dest, desc.addr1, ETH_ALEN);
+ if (fc & IEEE80211_FCTL_FROMDS)
+ memcpy(hdr->h_source, desc.addr3, ETH_ALEN);
+ else
+ memcpy(hdr->h_source, desc.addr2, ETH_ALEN);
dev->last_rx = jiffies;
skb->dev = dev;
skb->protocol = eth_type_trans(skb, dev);
skb->ip_summed = CHECKSUM_NONE;
+ if (fc & IEEE80211_FCTL_TODS)
+ skb->pkt_type = PACKET_OTHERHOST;
/* Process the wireless stats if needed */
orinoco_stat_gather(dev, skb, &desc);
return;
drop:
+ dev_kfree_skb_irq(skb);
+ update_stats:
+ stats->rx_errors++;
stats->rx_dropped++;
-
- if (skb)
- dev_kfree_skb_irq(skb);
- return;
}
/********************************************************************/
dev->name, s, status);
}
+/* Search scan results for requested BSSID, join it if found */
+static void orinoco_join_ap(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct hermes *hw = &priv->hw;
+ int err;
+ unsigned long flags;
+ struct join_req {
+ u8 bssid[ETH_ALEN];
+ __le16 channel;
+ } __attribute__ ((packed)) req;
+ const int atom_len = offsetof(struct prism2_scan_apinfo, atim);
+ struct prism2_scan_apinfo *atom = NULL;
+ int offset = 4;
+ int found = 0;
+ u8 *buf;
+ u16 len;
+
+ /* Allocate buffer for scan results */
+ buf = kmalloc(MAX_SCAN_LEN, GFP_KERNEL);
+ if (! buf)
+ return;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ goto fail_lock;
+
+ /* Sanity checks in case user changed something in the meantime */
+ if (! priv->bssid_fixed)
+ goto out;
+
+ if (strlen(priv->desired_essid) == 0)
+ goto out;
+
+ /* Read scan results from the firmware */
+ err = hermes_read_ltv(hw, USER_BAP,
+ HERMES_RID_SCANRESULTSTABLE,
+ MAX_SCAN_LEN, &len, buf);
+ if (err) {
+ printk(KERN_ERR "%s: Cannot read scan results\n",
+ dev->name);
+ goto out;
+ }
+
+ len = HERMES_RECLEN_TO_BYTES(len);
+
+ /* Go through the scan results looking for the channel of the AP
+ * we were requested to join */
+ for (; offset + atom_len <= len; offset += atom_len) {
+ atom = (struct prism2_scan_apinfo *) (buf + offset);
+ if (memcmp(&atom->bssid, priv->desired_bssid, ETH_ALEN) == 0) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (! found) {
+ DEBUG(1, "%s: Requested AP not found in scan results\n",
+ dev->name);
+ goto out;
+ }
+
+ memcpy(req.bssid, priv->desired_bssid, ETH_ALEN);
+ req.channel = atom->channel; /* both are little-endian */
+ err = HERMES_WRITE_RECORD(hw, USER_BAP, HERMES_RID_CNFJOINREQUEST,
+ &req);
+ if (err)
+ printk(KERN_ERR "%s: Error issuing join request\n", dev->name);
+
+ out:
+ orinoco_unlock(priv, &flags);
+
+ fail_lock:
+ kfree(buf);
+}
+
+/* Send new BSSID to userspace */
+static void orinoco_send_wevents(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct hermes *hw = &priv->hw;
+ union iwreq_data wrqu;
+ int err;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return;
+
+ err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENTBSSID,
+ ETH_ALEN, NULL, wrqu.ap_addr.sa_data);
+ if (err != 0)
+ goto out;
+
+ wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+
+ /* Send event to user space */
+ wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
+
+ out:
+ orinoco_unlock(priv, &flags);
+}
+
static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
{
struct orinoco_private *priv = netdev_priv(dev);
u16 infofid;
struct {
- u16 len;
- u16 type;
+ __le16 len;
+ __le16 type;
} __attribute__ ((packed)) info;
int len, type;
int err;
len = sizeof(tallies);
}
- /* Read directly the data (no seek) */
- hermes_read_words(hw, HERMES_DATA1, (void *) &tallies,
- len / 2); /* FIXME: blech! */
+ err = hermes_bap_pread(hw, IRQ_BAP, &tallies, len,
+ infofid, sizeof(info));
+ if (err)
+ break;
/* Increment our various counters */
/* wstats->discard.nwid - no wrong BSSID stuff */
u16 newstatus;
int connected;
+ if (priv->iw_mode == IW_MODE_MONITOR)
+ break;
+
if (len != sizeof(linkstatus)) {
printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n",
dev->name, len);
break;
}
- hermes_read_words(hw, HERMES_DATA1, (void *) &linkstatus,
- len / 2);
+ err = hermes_bap_pread(hw, IRQ_BAP, &linkstatus, len,
+ infofid, sizeof(info));
+ if (err)
+ break;
newstatus = le16_to_cpu(linkstatus.linkstatus);
+ /* Symbol firmware uses "out of range" to signal that
+ * the hostscan frame can be requested. */
+ if (newstatus == HERMES_LINKSTATUS_AP_OUT_OF_RANGE &&
+ priv->firmware_type == FIRMWARE_TYPE_SYMBOL &&
+ priv->has_hostscan && priv->scan_inprogress) {
+ hermes_inquire(hw, HERMES_INQ_HOSTSCAN_SYMBOL);
+ break;
+ }
+
connected = (newstatus == HERMES_LINKSTATUS_CONNECTED)
|| (newstatus == HERMES_LINKSTATUS_AP_CHANGE)
|| (newstatus == HERMES_LINKSTATUS_AP_IN_RANGE);
if (connected)
netif_carrier_on(dev);
- else
+ else if (!ignore_disconnect)
netif_carrier_off(dev);
- if (newstatus != priv->last_linkstatus)
+ if (newstatus != priv->last_linkstatus) {
+ priv->last_linkstatus = newstatus;
print_linkstatus(dev, newstatus);
-
- priv->last_linkstatus = newstatus;
+ /* The info frame contains only one word which is the
+ * status (see hermes.h). The status is pretty boring
+ * in itself, that's why we export the new BSSID...
+ * Jean II */
+ schedule_work(&priv->wevent_work);
+ }
}
break;
- default:
- printk(KERN_DEBUG "%s: Unknown information frame received: "
- "type 0x%04x, length %d\n", dev->name, type, len);
- /* We don't actually do anything about it */
- break;
- }
-}
-
+ case HERMES_INQ_SCAN:
+ if (!priv->scan_inprogress && priv->bssid_fixed &&
+ priv->firmware_type == FIRMWARE_TYPE_INTERSIL) {
+ schedule_work(&priv->join_work);
+ break;
+ }
+ /* fall through */
+ case HERMES_INQ_HOSTSCAN:
+ case HERMES_INQ_HOSTSCAN_SYMBOL: {
+ /* Result of a scanning. Contains information about
+ * cells in the vicinity - Jean II */
+ union iwreq_data wrqu;
+ unsigned char *buf;
+
+ /* Sanity check */
+ if (len > 4096) {
+ printk(KERN_WARNING "%s: Scan results too large (%d bytes)\n",
+ dev->name, len);
+ break;
+ }
+
+ /* We are a strict producer. If the previous scan results
+ * have not been consumed, we just have to drop this
+ * frame. We can't remove the previous results ourselves,
+ * that would be *very* racy... Jean II */
+ if (priv->scan_result != NULL) {
+ printk(KERN_WARNING "%s: Previous scan results not consumed, dropping info frame.\n", dev->name);
+ break;
+ }
+
+ /* Allocate buffer for results */
+ buf = kmalloc(len, GFP_ATOMIC);
+ if (buf == NULL)
+ /* No memory, so can't printk()... */
+ break;
+
+ /* Read scan data */
+ err = hermes_bap_pread(hw, IRQ_BAP, (void *) buf, len,
+ infofid, sizeof(info));
+ if (err) {
+ kfree(buf);
+ break;
+ }
+
+#ifdef ORINOCO_DEBUG
+ {
+ int i;
+ printk(KERN_DEBUG "Scan result [%02X", buf[0]);
+ for(i = 1; i < (len * 2); i++)
+ printk(":%02X", buf[i]);
+ printk("]\n");
+ }
+#endif /* ORINOCO_DEBUG */
+
+ /* Allow the clients to access the results */
+ priv->scan_len = len;
+ priv->scan_result = buf;
+
+ /* Send an empty event to user space.
+ * We don't send the received data on the event because
+ * it would require us to do complex transcoding, and
+ * we want to minimise the work done in the irq handler
+ * Use a request to extract the data - Jean II */
+ wrqu.data.length = 0;
+ wrqu.data.flags = 0;
+ wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL);
+ }
+ break;
+ case HERMES_INQ_SEC_STAT_AGERE:
+ /* Security status (Agere specific) */
+ /* Ignore this frame for now */
+ if (priv->firmware_type == FIRMWARE_TYPE_AGERE)
+ break;
+ /* fall through */
+ default:
+ printk(KERN_DEBUG "%s: Unknown information frame received: "
+ "type 0x%04x, length %d\n", dev->name, type, len);
+ /* We don't actually do anything about it */
+ break;
+ }
+}
+
static void __orinoco_ev_infdrop(struct net_device *dev, hermes_t *hw)
{
if (net_ratelimit())
struct hermes *hw = &priv->hw;
int err;
+ netif_carrier_off(dev); /* just to make sure */
+
err = __orinoco_program_rids(dev);
if (err) {
printk(KERN_ERR "%s: Error %d configuring card\n",
return err;
err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
- if (err == -EIO) {
+ if (err == -EIO && priv->nicbuf_size > TX_NICBUF_SIZE_BUG) {
/* Try workaround for old Symbol firmware bug */
printk(KERN_WARNING "%s: firmware ALLOC bug detected "
"(old Symbol firmware?). Trying to work around... ",
return err;
}
+/* Set fixed AP address */
+static int __orinoco_hw_set_wap(struct orinoco_private *priv)
+{
+ int roaming_flag;
+ int err = 0;
+ hermes_t *hw = &priv->hw;
+
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_AGERE:
+ /* not supported */
+ break;
+ case FIRMWARE_TYPE_INTERSIL:
+ if (priv->bssid_fixed)
+ roaming_flag = 2;
+ else
+ roaming_flag = 1;
+
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFROAMINGMODE,
+ roaming_flag);
+ break;
+ case FIRMWARE_TYPE_SYMBOL:
+ err = HERMES_WRITE_RECORD(hw, USER_BAP,
+ HERMES_RID_CNFMANDATORYBSSID_SYMBOL,
+ &priv->desired_bssid);
+ break;
+ }
+ return err;
+}
+
/* Change the WEP keys and/or the current keys. Can be called
* either from __orinoco_hw_setup_wep() or directly from
* orinoco_ioctl_setiwencode(). In the later case the association
return err;
}
/* Set the channel/frequency */
- if (priv->channel == 0) {
- printk(KERN_DEBUG "%s: Channel is 0 in __orinoco_program_rids()\n", dev->name);
- if (priv->createibss)
- priv->channel = 10;
- }
- err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFOWNCHANNEL,
- priv->channel);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting channel\n",
- dev->name, err);
- return err;
+ if (priv->channel != 0 && priv->iw_mode != IW_MODE_INFRA) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFOWNCHANNEL,
+ priv->channel);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting channel %d\n",
+ dev->name, err, priv->channel);
+ return err;
+ }
}
if (priv->has_ibss) {
}
}
+ /* Set the desired BSSID */
+ err = __orinoco_hw_set_wap(priv);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting AP address\n",
+ dev->name, err);
+ return err;
+ }
/* Set the desired ESSID */
idbuf.len = cpu_to_le16(strlen(priv->desired_essid));
memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val));
}
}
+ if (priv->iw_mode == IW_MODE_MONITOR) {
+ /* Enable monitor mode */
+ dev->type = ARPHRD_IEEE80211;
+ err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
+ HERMES_TEST_MONITOR, 0, NULL);
+ } else {
+ /* Disable monitor mode */
+ dev->type = ARPHRD_ETHER;
+ err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
+ HERMES_TEST_STOP, 0, NULL);
+ }
+ if (err)
+ return err;
+
/* Set promiscuity / multicast*/
priv->promiscuous = 0;
priv->mc_count = 0;
dev->flags &= ~IFF_PROMISC;
}
-static int orinoco_reconfigure(struct net_device *dev)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- struct hermes *hw = &priv->hw;
- unsigned long flags;
- int err = 0;
-
- if (priv->broken_disableport) {
- schedule_work(&priv->reset_work);
- return 0;
- }
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- err = hermes_disable_port(hw, 0);
- if (err) {
- printk(KERN_WARNING "%s: Unable to disable port while reconfiguring card\n",
- dev->name);
- priv->broken_disableport = 1;
- goto out;
- }
-
- err = __orinoco_program_rids(dev);
- if (err) {
- printk(KERN_WARNING "%s: Unable to reconfigure card\n",
- dev->name);
- goto out;
- }
-
- err = hermes_enable_port(hw, 0);
- if (err) {
- printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n",
- dev->name);
- goto out;
- }
-
- out:
- if (err) {
- printk(KERN_WARNING "%s: Resetting instead...\n", dev->name);
- schedule_work(&priv->reset_work);
- err = 0;
- }
-
- orinoco_unlock(priv, &flags);
- return err;
-
-}
-
/* This must be called from user context, without locks held - use
* schedule_work() */
static void orinoco_reset(struct net_device *dev)
{
struct orinoco_private *priv = netdev_priv(dev);
struct hermes *hw = &priv->hw;
- int err = 0;
+ int err;
unsigned long flags;
if (orinoco_lock(priv, &flags) != 0)
orinoco_unlock(priv, &flags);
- if (priv->hard_reset)
+ /* Scanning support: Cleanup of driver struct */
+ kfree(priv->scan_result);
+ priv->scan_result = NULL;
+ priv->scan_inprogress = 0;
+
+ if (priv->hard_reset) {
err = (*priv->hard_reset)(priv);
- if (err) {
- printk(KERN_ERR "%s: orinoco_reset: Error %d "
- "performing hard reset\n", dev->name, err);
- /* FIXME: shutdown of some sort */
- return;
+ if (err) {
+ printk(KERN_ERR "%s: orinoco_reset: Error %d "
+ "performing hard reset\n", dev->name, err);
+ goto disable;
+ }
}
err = orinoco_reinit_firmware(dev);
if (err) {
printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n",
dev->name, err);
- return;
+ goto disable;
}
spin_lock_irq(&priv->lock); /* This has to be called from user context */
spin_unlock_irq(&priv->lock);
return;
+ disable:
+ hermes_set_irqmask(hw, 0);
+ netif_device_detach(dev);
+ printk(KERN_ERR "%s: Device has been disabled!\n", dev->name);
}
/********************************************************************/
if (events & HERMES_EV_ALLOC)
__orinoco_ev_alloc(dev, hw);
- hermes_write_regn(hw, EVACK, events);
+ hermes_write_regn(hw, EVACK, evstat);
evstat = hermes_read_regn(hw, EVSTAT);
events = evstat & hw->inten;
priv->has_mwo = (firmver >= 0x60000);
priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */
priv->ibss_port = 1;
+ priv->has_hostscan = (firmver >= 0x8000a);
+ priv->broken_monitor = (firmver >= 0x80000);
/* Tested with Agere firmware :
* 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II
firmver >= 0x31000;
priv->has_preamble = (firmver >= 0x20000);
priv->ibss_port = 4;
+ priv->broken_disableport = (firmver == 0x25013) ||
+ (firmver >= 0x30000 && firmver <= 0x31000);
+ priv->has_hostscan = (firmver >= 0x31001) ||
+ (firmver >= 0x29057 && firmver < 0x30000);
/* Tested with Intel firmware : 0x20015 => Jean II */
/* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */
break;
priv->has_ibss = (firmver >= 0x000700); /* FIXME */
priv->has_big_wep = priv->has_wep = (firmver >= 0x000800);
priv->has_pm = (firmver >= 0x000700);
+ priv->has_hostscan = (firmver >= 0x010301);
if (firmver >= 0x000800)
priv->ibss_port = 0;
/* No need to lock, the hw_unavailable flag is already set in
* alloc_orinocodev() */
- priv->nicbuf_size = IEEE802_11_FRAME_LEN + ETH_HLEN;
+ priv->nicbuf_size = IEEE80211_FRAME_LEN + ETH_HLEN;
/* Initialize the firmware */
- err = hermes_init(hw);
+ err = orinoco_reinit_firmware(dev);
if (err != 0) {
printk(KERN_ERR "%s: failed to initialize firmware (err = %d)\n",
dev->name, err);
/* By default use IEEE/IBSS ad-hoc mode if we have it */
priv->prefer_port3 = priv->has_port3 && (! priv->has_ibss);
set_port_type(priv);
- priv->channel = 10; /* default channel, more-or-less arbitrary */
+ priv->channel = 0; /* use firmware default */
priv->promiscuous = 0;
priv->wep_on = 0;
priv->tx_key = 0;
- err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
- if (err == -EIO) {
- /* Try workaround for old Symbol firmware bug */
- printk(KERN_WARNING "%s: firmware ALLOC bug detected "
- "(old Symbol firmware?). Trying to work around... ",
- dev->name);
-
- priv->nicbuf_size = TX_NICBUF_SIZE_BUG;
- err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
- if (err)
- printk("failed!\n");
- else
- printk("ok.\n");
- }
- if (err) {
- printk("%s: Error %d allocating Tx buffer\n", dev->name, err);
- goto out;
- }
-
/* Make the hardware available, as long as it hasn't been
* removed elsewhere (e.g. by PCMCIA hot unplug) */
spin_lock_irq(&priv->lock);
priv = netdev_priv(dev);
priv->ndev = dev;
if (sizeof_card)
- priv->card = (void *)((unsigned long)netdev_priv(dev)
+ priv->card = (void *)((unsigned long)priv
+ sizeof(struct orinoco_private));
else
priv->card = NULL;
dev->tx_timeout = orinoco_tx_timeout;
dev->watchdog_timeo = HZ; /* 1 second timeout */
dev->get_stats = orinoco_get_stats;
- dev->get_wireless_stats = orinoco_get_wireless_stats;
- dev->do_ioctl = orinoco_ioctl;
+ dev->ethtool_ops = &orinoco_ethtool_ops;
+ dev->wireless_handlers = (struct iw_handler_def *)&orinoco_handler_def;
+#ifdef WIRELESS_SPY
+ priv->wireless_data.spy_data = &priv->spy_data;
+ dev->wireless_data = &priv->wireless_data;
+#endif
dev->change_mtu = orinoco_change_mtu;
dev->set_multicast_list = orinoco_set_multicast_list;
/* we use the default eth_mac_addr for setting the MAC addr */
* before anything else touches the
* hardware */
INIT_WORK(&priv->reset_work, (void (*)(void *))orinoco_reset, dev);
+ INIT_WORK(&priv->join_work, (void (*)(void *))orinoco_join_ap, dev);
+ INIT_WORK(&priv->wevent_work, (void (*)(void *))orinoco_send_wevents, dev);
netif_carrier_off(dev);
priv->last_linkstatus = 0xffff;
void free_orinocodev(struct net_device *dev)
{
+ struct orinoco_private *priv = netdev_priv(dev);
+
+ kfree(priv->scan_result);
free_netdev(dev);
}
/* Wireless extensions */
/********************************************************************/
-static int orinoco_hw_get_bssid(struct orinoco_private *priv,
- char buf[ETH_ALEN])
-{
- hermes_t *hw = &priv->hw;
- int err = 0;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID,
- ETH_ALEN, NULL, buf);
-
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
static int orinoco_hw_get_essid(struct orinoco_private *priv, int *active,
char buf[IW_ESSID_MAX_SIZE+1])
{
}
len = le16_to_cpu(essidbuf.len);
+ BUG_ON(len > IW_ESSID_MAX_SIZE);
memset(buf, 0, IW_ESSID_MAX_SIZE+1);
memcpy(buf, p, len);
return 0;
}
-static int orinoco_ioctl_getiwrange(struct net_device *dev, struct iw_point *rrq)
+static int orinoco_ioctl_getname(struct net_device *dev,
+ struct iw_request_info *info,
+ char *name,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
- int err = 0;
- int mode;
- struct iw_range range;
int numrates;
- int i, k;
- unsigned long flags;
+ int err;
- TRACE_ENTER(dev->name);
+ err = orinoco_hw_get_bitratelist(priv, &numrates, NULL, 0);
+
+ if (!err && (numrates > 2))
+ strcpy(name, "IEEE 802.11b");
+ else
+ strcpy(name, "IEEE 802.11-DS");
- if (!access_ok(VERIFY_WRITE, rrq->pointer, sizeof(range)))
- return -EFAULT;
+ return 0;
+}
- rrq->length = sizeof(range);
+static int orinoco_ioctl_setwap(struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *ap_addr,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int err = -EINPROGRESS; /* Call commit handler */
+ unsigned long flags;
+ static const u8 off_addr[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+ static const u8 any_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
if (orinoco_lock(priv, &flags) != 0)
return -EBUSY;
- mode = priv->iw_mode;
- orinoco_unlock(priv, &flags);
+ /* Enable automatic roaming - no sanity checks are needed */
+ if (memcmp(&ap_addr->sa_data, off_addr, ETH_ALEN) == 0 ||
+ memcmp(&ap_addr->sa_data, any_addr, ETH_ALEN) == 0) {
+ priv->bssid_fixed = 0;
+ memset(priv->desired_bssid, 0, ETH_ALEN);
- memset(&range, 0, sizeof(range));
+ /* "off" means keep existing connection */
+ if (ap_addr->sa_data[0] == 0) {
+ __orinoco_hw_set_wap(priv);
+ err = 0;
+ }
+ goto out;
+ }
- /* Much of this shamelessly taken from wvlan_cs.c. No idea
- * what it all means -dgibson */
- range.we_version_compiled = WIRELESS_EXT;
- range.we_version_source = 11;
+ if (priv->firmware_type == FIRMWARE_TYPE_AGERE) {
+ printk(KERN_WARNING "%s: Lucent/Agere firmware doesn't "
+ "support manual roaming\n",
+ dev->name);
+ err = -EOPNOTSUPP;
+ goto out;
+ }
- range.min_nwid = range.max_nwid = 0; /* We don't use nwids */
+ if (priv->iw_mode != IW_MODE_INFRA) {
+ printk(KERN_WARNING "%s: Manual roaming supported only in "
+ "managed mode\n", dev->name);
+ err = -EOPNOTSUPP;
+ goto out;
+ }
- /* Set available channels/frequencies */
- range.num_channels = NUM_CHANNELS;
- k = 0;
- for (i = 0; i < NUM_CHANNELS; i++) {
- if (priv->channel_mask & (1 << i)) {
- range.freq[k].i = i + 1;
- range.freq[k].m = channel_frequency[i] * 100000;
- range.freq[k].e = 1;
- k++;
- }
-
- if (k >= IW_MAX_FREQUENCIES)
- break;
+ /* Intersil firmware hangs without Desired ESSID */
+ if (priv->firmware_type == FIRMWARE_TYPE_INTERSIL &&
+ strlen(priv->desired_essid) == 0) {
+ printk(KERN_WARNING "%s: Desired ESSID must be set for "
+ "manual roaming\n", dev->name);
+ err = -EOPNOTSUPP;
+ goto out;
}
- range.num_frequency = k;
- range.sensitivity = 3;
+ /* Finally, enable manual roaming */
+ priv->bssid_fixed = 1;
+ memcpy(priv->desired_bssid, &ap_addr->sa_data, ETH_ALEN);
- if ((mode == IW_MODE_ADHOC) && (priv->spy_number == 0)){
- /* Quality stats meaningless in ad-hoc mode */
- range.max_qual.qual = 0;
- range.max_qual.level = 0;
- range.max_qual.noise = 0;
- range.avg_qual.qual = 0;
- range.avg_qual.level = 0;
- range.avg_qual.noise = 0;
- } else {
- range.max_qual.qual = 0x8b - 0x2f;
- range.max_qual.level = 0x2f - 0x95 - 1;
- range.max_qual.noise = 0x2f - 0x95 - 1;
- /* Need to get better values */
- range.avg_qual.qual = 0x24;
- range.avg_qual.level = 0xC2;
- range.avg_qual.noise = 0x9E;
- }
+ out:
+ orinoco_unlock(priv, &flags);
+ return err;
+}
- err = orinoco_hw_get_bitratelist(priv, &numrates,
- range.bitrate, IW_MAX_BITRATES);
- if (err)
- return err;
- range.num_bitrates = numrates;
-
- /* Set an indication of the max TCP throughput in bit/s that we can
- * expect using this interface. May be use for QoS stuff...
- * Jean II */
- if(numrates > 2)
- range.throughput = 5 * 1000 * 1000; /* ~5 Mb/s */
- else
- range.throughput = 1.5 * 1000 * 1000; /* ~1.5 Mb/s */
+static int orinoco_ioctl_getwap(struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *ap_addr,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
- range.min_rts = 0;
- range.max_rts = 2347;
- range.min_frag = 256;
- range.max_frag = 2346;
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ unsigned long flags;
if (orinoco_lock(priv, &flags) != 0)
return -EBUSY;
- if (priv->has_wep) {
- range.max_encoding_tokens = ORINOCO_MAX_KEYS;
- range.encoding_size[0] = SMALL_KEY_SIZE;
- range.num_encoding_sizes = 1;
+ ap_addr->sa_family = ARPHRD_ETHER;
+ err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID,
+ ETH_ALEN, NULL, ap_addr->sa_data);
- if (priv->has_big_wep) {
- range.encoding_size[1] = LARGE_KEY_SIZE;
- range.num_encoding_sizes = 2;
- }
- } else {
- range.num_encoding_sizes = 0;
- range.max_encoding_tokens = 0;
- }
orinoco_unlock(priv, &flags);
-
- range.min_pmp = 0;
- range.max_pmp = 65535000;
- range.min_pmt = 0;
- range.max_pmt = 65535 * 1000; /* ??? */
- range.pmp_flags = IW_POWER_PERIOD;
- range.pmt_flags = IW_POWER_TIMEOUT;
- range.pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_UNICAST_R;
-
- range.num_txpower = 1;
- range.txpower[0] = 15; /* 15dBm */
- range.txpower_capa = IW_TXPOW_DBM;
-
- range.retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME;
- range.retry_flags = IW_RETRY_LIMIT;
- range.r_time_flags = IW_RETRY_LIFETIME;
- range.min_retry = 0;
- range.max_retry = 65535; /* ??? */
- range.min_r_time = 0;
- range.max_r_time = 65535 * 1000; /* ??? */
-
- if (copy_to_user(rrq->pointer, &range, sizeof(range)))
- return -EFAULT;
-
- TRACE_EXIT(dev->name);
- return 0;
+ return err;
}
-static int orinoco_ioctl_setiwencode(struct net_device *dev, struct iw_point *erq)
+static int orinoco_ioctl_setmode(struct net_device *dev,
+ struct iw_request_info *info,
+ u32 *mode,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
- int index = (erq->flags & IW_ENCODE_INDEX) - 1;
- int setindex = priv->tx_key;
- int enable = priv->wep_on;
- int restricted = priv->wep_restrict;
- u16 xlen = 0;
- int err = 0;
- char keybuf[ORINOCO_MAX_KEY_SIZE];
+ int err = -EINPROGRESS; /* Call commit handler */
unsigned long flags;
- if (! priv->has_wep)
- return -EOPNOTSUPP;
-
- if (erq->pointer) {
- /* We actually have a key to set - check its length */
- if (erq->length > LARGE_KEY_SIZE)
- return -E2BIG;
-
- if ( (erq->length > SMALL_KEY_SIZE) && !priv->has_big_wep )
- return -E2BIG;
-
- if (copy_from_user(keybuf, erq->pointer, erq->length))
- return -EFAULT;
- }
+ if (priv->iw_mode == *mode)
+ return 0;
if (orinoco_lock(priv, &flags) != 0)
return -EBUSY;
- if (erq->pointer) {
- if ((index < 0) || (index >= ORINOCO_MAX_KEYS))
- index = priv->tx_key;
+ switch (*mode) {
+ case IW_MODE_ADHOC:
+ if (!priv->has_ibss && !priv->has_port3)
+ err = -EOPNOTSUPP;
+ break;
- /* Adjust key length to a supported value */
- if (erq->length > SMALL_KEY_SIZE) {
- xlen = LARGE_KEY_SIZE;
- } else if (erq->length > 0) {
- xlen = SMALL_KEY_SIZE;
+ case IW_MODE_INFRA:
+ break;
+
+ case IW_MODE_MONITOR:
+ if (priv->broken_monitor && !force_monitor) {
+ printk(KERN_WARNING "%s: Monitor mode support is "
+ "buggy in this firmware, not enabling\n",
+ dev->name);
+ err = -EOPNOTSUPP;
+ }
+ break;
+
+ default:
+ err = -EOPNOTSUPP;
+ break;
+ }
+
+ if (err == -EINPROGRESS) {
+ priv->iw_mode = *mode;
+ set_port_type(priv);
+ }
+
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_getmode(struct net_device *dev,
+ struct iw_request_info *info,
+ u32 *mode,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+
+ *mode = priv->iw_mode;
+ return 0;
+}
+
+static int orinoco_ioctl_getiwrange(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *rrq,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int err = 0;
+ struct iw_range *range = (struct iw_range *) extra;
+ int numrates;
+ int i, k;
+
+ TRACE_ENTER(dev->name);
+
+ rrq->length = sizeof(struct iw_range);
+ memset(range, 0, sizeof(struct iw_range));
+
+ range->we_version_compiled = WIRELESS_EXT;
+ range->we_version_source = 14;
+
+ /* Set available channels/frequencies */
+ range->num_channels = NUM_CHANNELS;
+ k = 0;
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ if (priv->channel_mask & (1 << i)) {
+ range->freq[k].i = i + 1;
+ range->freq[k].m = channel_frequency[i] * 100000;
+ range->freq[k].e = 1;
+ k++;
+ }
+
+ if (k >= IW_MAX_FREQUENCIES)
+ break;
+ }
+ range->num_frequency = k;
+ range->sensitivity = 3;
+
+ if (priv->has_wep) {
+ range->max_encoding_tokens = ORINOCO_MAX_KEYS;
+ range->encoding_size[0] = SMALL_KEY_SIZE;
+ range->num_encoding_sizes = 1;
+
+ if (priv->has_big_wep) {
+ range->encoding_size[1] = LARGE_KEY_SIZE;
+ range->num_encoding_sizes = 2;
+ }
+ }
+
+ if ((priv->iw_mode == IW_MODE_ADHOC) && (!SPY_NUMBER(priv))){
+ /* Quality stats meaningless in ad-hoc mode */
+ } else {
+ range->max_qual.qual = 0x8b - 0x2f;
+ range->max_qual.level = 0x2f - 0x95 - 1;
+ range->max_qual.noise = 0x2f - 0x95 - 1;
+ /* Need to get better values */
+ range->avg_qual.qual = 0x24;
+ range->avg_qual.level = 0xC2;
+ range->avg_qual.noise = 0x9E;
+ }
+
+ err = orinoco_hw_get_bitratelist(priv, &numrates,
+ range->bitrate, IW_MAX_BITRATES);
+ if (err)
+ return err;
+ range->num_bitrates = numrates;
+
+ /* Set an indication of the max TCP throughput in bit/s that we can
+ * expect using this interface. May be use for QoS stuff...
+ * Jean II */
+ if (numrates > 2)
+ range->throughput = 5 * 1000 * 1000; /* ~5 Mb/s */
+ else
+ range->throughput = 1.5 * 1000 * 1000; /* ~1.5 Mb/s */
+
+ range->min_rts = 0;
+ range->max_rts = 2347;
+ range->min_frag = 256;
+ range->max_frag = 2346;
+
+ range->min_pmp = 0;
+ range->max_pmp = 65535000;
+ range->min_pmt = 0;
+ range->max_pmt = 65535 * 1000; /* ??? */
+ range->pmp_flags = IW_POWER_PERIOD;
+ range->pmt_flags = IW_POWER_TIMEOUT;
+ range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_UNICAST_R;
+
+ range->retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME;
+ range->retry_flags = IW_RETRY_LIMIT;
+ range->r_time_flags = IW_RETRY_LIFETIME;
+ range->min_retry = 0;
+ range->max_retry = 65535; /* ??? */
+ range->min_r_time = 0;
+ range->max_r_time = 65535 * 1000; /* ??? */
+
+ /* Event capability (kernel) */
+ IW_EVENT_CAPA_SET_KERNEL(range->event_capa);
+ /* Event capability (driver) */
+ IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWTHRSPY);
+ IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWAP);
+ IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWSCAN);
+ IW_EVENT_CAPA_SET(range->event_capa, IWEVTXDROP);
+
+ TRACE_EXIT(dev->name);
+
+ return 0;
+}
+
+static int orinoco_ioctl_setiwencode(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *erq,
+ char *keybuf)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int index = (erq->flags & IW_ENCODE_INDEX) - 1;
+ int setindex = priv->tx_key;
+ int enable = priv->wep_on;
+ int restricted = priv->wep_restrict;
+ u16 xlen = 0;
+ int err = -EINPROGRESS; /* Call commit handler */
+ unsigned long flags;
+
+ if (! priv->has_wep)
+ return -EOPNOTSUPP;
+
+ if (erq->pointer) {
+ /* We actually have a key to set - check its length */
+ if (erq->length > LARGE_KEY_SIZE)
+ return -E2BIG;
+
+ if ( (erq->length > SMALL_KEY_SIZE) && !priv->has_big_wep )
+ return -E2BIG;
+ }
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ if (erq->pointer) {
+ if ((index < 0) || (index >= ORINOCO_MAX_KEYS))
+ index = priv->tx_key;
+
+ /* Adjust key length to a supported value */
+ if (erq->length > SMALL_KEY_SIZE) {
+ xlen = LARGE_KEY_SIZE;
+ } else if (erq->length > 0) {
+ xlen = SMALL_KEY_SIZE;
} else
xlen = 0;
return err;
}
-static int orinoco_ioctl_getiwencode(struct net_device *dev, struct iw_point *erq)
+static int orinoco_ioctl_getiwencode(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *erq,
+ char *keybuf)
{
struct orinoco_private *priv = netdev_priv(dev);
int index = (erq->flags & IW_ENCODE_INDEX) - 1;
u16 xlen = 0;
- char keybuf[ORINOCO_MAX_KEY_SIZE];
unsigned long flags;
if (! priv->has_wep)
memcpy(keybuf, priv->keys[index].data, ORINOCO_MAX_KEY_SIZE);
orinoco_unlock(priv, &flags);
-
- if (erq->pointer) {
- if (copy_to_user(erq->pointer, keybuf, xlen))
- return -EFAULT;
- }
-
return 0;
}
-static int orinoco_ioctl_setessid(struct net_device *dev, struct iw_point *erq)
+static int orinoco_ioctl_setessid(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *erq,
+ char *essidbuf)
{
struct orinoco_private *priv = netdev_priv(dev);
- char essidbuf[IW_ESSID_MAX_SIZE+1];
unsigned long flags;
/* Note : ESSID is ignored in Ad-Hoc demo mode, but we can set it
* anyway... - Jean II */
- memset(&essidbuf, 0, sizeof(essidbuf));
-
- if (erq->flags) {
- if (erq->length > IW_ESSID_MAX_SIZE)
- return -E2BIG;
-
- if (copy_from_user(&essidbuf, erq->pointer, erq->length))
- return -EFAULT;
-
- essidbuf[erq->length] = '\0';
- }
+ /* Hum... Should not use Wireless Extension constant (may change),
+ * should use our own... - Jean II */
+ if (erq->length > IW_ESSID_MAX_SIZE)
+ return -E2BIG;
if (orinoco_lock(priv, &flags) != 0)
return -EBUSY;
- memcpy(priv->desired_essid, essidbuf, sizeof(priv->desired_essid));
+ /* NULL the string (for NULL termination & ESSID = ANY) - Jean II */
+ memset(priv->desired_essid, 0, sizeof(priv->desired_essid));
+
+ /* If not ANY, get the new ESSID */
+ if (erq->flags) {
+ memcpy(priv->desired_essid, essidbuf, erq->length);
+ }
orinoco_unlock(priv, &flags);
- return 0;
+ return -EINPROGRESS; /* Call commit handler */
}
-static int orinoco_ioctl_getessid(struct net_device *dev, struct iw_point *erq)
+static int orinoco_ioctl_getessid(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *erq,
+ char *essidbuf)
{
struct orinoco_private *priv = netdev_priv(dev);
- char essidbuf[IW_ESSID_MAX_SIZE+1];
int active;
int err = 0;
unsigned long flags;
} else {
if (orinoco_lock(priv, &flags) != 0)
return -EBUSY;
- memcpy(essidbuf, priv->desired_essid, sizeof(essidbuf));
+ memcpy(essidbuf, priv->desired_essid, IW_ESSID_MAX_SIZE + 1);
orinoco_unlock(priv, &flags);
}
erq->flags = 1;
erq->length = strlen(essidbuf) + 1;
- if (erq->pointer)
- if (copy_to_user(erq->pointer, essidbuf, erq->length))
- return -EFAULT;
TRACE_EXIT(dev->name);
return 0;
}
-static int orinoco_ioctl_setnick(struct net_device *dev, struct iw_point *nrq)
+static int orinoco_ioctl_setnick(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *nrq,
+ char *nickbuf)
{
struct orinoco_private *priv = netdev_priv(dev);
- char nickbuf[IW_ESSID_MAX_SIZE+1];
unsigned long flags;
if (nrq->length > IW_ESSID_MAX_SIZE)
return -E2BIG;
- memset(nickbuf, 0, sizeof(nickbuf));
-
- if (copy_from_user(nickbuf, nrq->pointer, nrq->length))
- return -EFAULT;
-
- nickbuf[nrq->length] = '\0';
-
if (orinoco_lock(priv, &flags) != 0)
return -EBUSY;
- memcpy(priv->nick, nickbuf, sizeof(priv->nick));
+ memset(priv->nick, 0, sizeof(priv->nick));
+ memcpy(priv->nick, nickbuf, nrq->length);
orinoco_unlock(priv, &flags);
- return 0;
+ return -EINPROGRESS; /* Call commit handler */
}
-static int orinoco_ioctl_getnick(struct net_device *dev, struct iw_point *nrq)
+static int orinoco_ioctl_getnick(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *nrq,
+ char *nickbuf)
{
struct orinoco_private *priv = netdev_priv(dev);
- char nickbuf[IW_ESSID_MAX_SIZE+1];
unsigned long flags;
if (orinoco_lock(priv, &flags) != 0)
nrq->length = strlen(nickbuf)+1;
- if (copy_to_user(nrq->pointer, nickbuf, sizeof(nickbuf)))
- return -EFAULT;
-
return 0;
}
-static int orinoco_ioctl_setfreq(struct net_device *dev, struct iw_freq *frq)
+static int orinoco_ioctl_setfreq(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_freq *frq,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
int chan = -1;
unsigned long flags;
+ int err = -EINPROGRESS; /* Call commit handler */
- /* We can only use this in Ad-Hoc demo mode to set the operating
- * frequency, or in IBSS mode to set the frequency where the IBSS
- * will be created - Jean II */
- if (priv->iw_mode != IW_MODE_ADHOC)
- return -EOPNOTSUPP;
+ /* In infrastructure mode the AP sets the channel */
+ if (priv->iw_mode == IW_MODE_INFRA)
+ return -EBUSY;
if ( (frq->e == 0) && (frq->m <= 1000) ) {
/* Setting by channel number */
if (orinoco_lock(priv, &flags) != 0)
return -EBUSY;
+
priv->channel = chan;
+ if (priv->iw_mode == IW_MODE_MONITOR) {
+ /* Fast channel change - no commit if successful */
+ hermes_t *hw = &priv->hw;
+ err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
+ HERMES_TEST_SET_CHANNEL,
+ chan, NULL);
+ }
orinoco_unlock(priv, &flags);
+ return err;
+}
+
+static int orinoco_ioctl_getfreq(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_freq *frq,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int tmp;
+
+ /* Locking done in there */
+ tmp = orinoco_hw_get_freq(priv);
+ if (tmp < 0) {
+ return tmp;
+ }
+
+ frq->m = tmp;
+ frq->e = 1;
+
return 0;
}
-static int orinoco_ioctl_getsens(struct net_device *dev, struct iw_param *srq)
+static int orinoco_ioctl_getsens(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *srq,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
hermes_t *hw = &priv->hw;
return 0;
}
-static int orinoco_ioctl_setsens(struct net_device *dev, struct iw_param *srq)
+static int orinoco_ioctl_setsens(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *srq,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
int val = srq->value;
priv->ap_density = val;
orinoco_unlock(priv, &flags);
- return 0;
+ return -EINPROGRESS; /* Call commit handler */
}
-static int orinoco_ioctl_setrts(struct net_device *dev, struct iw_param *rrq)
+static int orinoco_ioctl_setrts(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rrq,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
int val = rrq->value;
priv->rts_thresh = val;
orinoco_unlock(priv, &flags);
+ return -EINPROGRESS; /* Call commit handler */
+}
+
+static int orinoco_ioctl_getrts(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rrq,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+
+ rrq->value = priv->rts_thresh;
+ rrq->disabled = (rrq->value == 2347);
+ rrq->fixed = 1;
+
return 0;
}
-static int orinoco_ioctl_setfrag(struct net_device *dev, struct iw_param *frq)
+static int orinoco_ioctl_setfrag(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *frq,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
- int err = 0;
+ int err = -EINPROGRESS; /* Call commit handler */
unsigned long flags;
if (orinoco_lock(priv, &flags) != 0)
return err;
}
-static int orinoco_ioctl_getfrag(struct net_device *dev, struct iw_param *frq)
+static int orinoco_ioctl_getfrag(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *frq,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
hermes_t *hw = &priv->hw;
- int err = 0;
+ int err;
u16 val;
unsigned long flags;
return err;
}
-static int orinoco_ioctl_setrate(struct net_device *dev, struct iw_param *rrq)
+static int orinoco_ioctl_setrate(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rrq,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
- int err = 0;
int ratemode = -1;
int bitrate; /* 100s of kilobits */
int i;
priv->bitratemode = ratemode;
orinoco_unlock(priv, &flags);
- return err;
+ return -EINPROGRESS;
}
-static int orinoco_ioctl_getrate(struct net_device *dev, struct iw_param *rrq)
+static int orinoco_ioctl_getrate(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rrq,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
hermes_t *hw = &priv->hw;
return err;
}
-static int orinoco_ioctl_setpower(struct net_device *dev, struct iw_param *prq)
+static int orinoco_ioctl_setpower(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *prq,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
- int err = 0;
+ int err = -EINPROGRESS; /* Call commit handler */
unsigned long flags;
if (orinoco_lock(priv, &flags) != 0)
break;
default:
err = -EINVAL;
- }
- if (err)
goto out;
+ }
if (prq->flags & IW_POWER_TIMEOUT) {
priv->pm_on = 1;
return err;
}
-static int orinoco_ioctl_getpower(struct net_device *dev, struct iw_param *prq)
+static int orinoco_ioctl_getpower(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *prq,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
hermes_t *hw = &priv->hw;
return err;
}
-static int orinoco_ioctl_getretry(struct net_device *dev, struct iw_param *rrq)
+static int orinoco_ioctl_getretry(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rrq,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
hermes_t *hw = &priv->hw;
return err;
}
-static int orinoco_ioctl_setibssport(struct net_device *dev, struct iwreq *wrq)
+static int orinoco_ioctl_reset(struct net_device *dev,
+ struct iw_request_info *info,
+ void *wrqu,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
- int val = *( (int *) wrq->u.name );
+
+ if (! capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ if (info->cmd == (SIOCIWFIRSTPRIV + 0x1)) {
+ printk(KERN_DEBUG "%s: Forcing reset!\n", dev->name);
+
+ /* Firmware reset */
+ orinoco_reset(dev);
+ } else {
+ printk(KERN_DEBUG "%s: Force scheduling reset!\n", dev->name);
+
+ schedule_work(&priv->reset_work);
+ }
+
+ return 0;
+}
+
+static int orinoco_ioctl_setibssport(struct net_device *dev,
+ struct iw_request_info *info,
+ void *wrqu,
+ char *extra)
+
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int val = *( (int *) extra );
unsigned long flags;
if (orinoco_lock(priv, &flags) != 0)
set_port_type(priv);
orinoco_unlock(priv, &flags);
- return 0;
+ return -EINPROGRESS; /* Call commit handler */
}
-static int orinoco_ioctl_getibssport(struct net_device *dev, struct iwreq *wrq)
+static int orinoco_ioctl_getibssport(struct net_device *dev,
+ struct iw_request_info *info,
+ void *wrqu,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
- int *val = (int *)wrq->u.name;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
+ int *val = (int *) extra;
*val = priv->ibss_port;
- orinoco_unlock(priv, &flags);
-
return 0;
}
-static int orinoco_ioctl_setport3(struct net_device *dev, struct iwreq *wrq)
+static int orinoco_ioctl_setport3(struct net_device *dev,
+ struct iw_request_info *info,
+ void *wrqu,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
- int val = *( (int *) wrq->u.name );
+ int val = *( (int *) extra );
int err = 0;
unsigned long flags;
err = -EINVAL;
}
- if (! err)
+ if (! err) {
/* Actually update the mode we are using */
set_port_type(priv);
+ err = -EINPROGRESS;
+ }
orinoco_unlock(priv, &flags);
return err;
}
-static int orinoco_ioctl_getport3(struct net_device *dev, struct iwreq *wrq)
+static int orinoco_ioctl_getport3(struct net_device *dev,
+ struct iw_request_info *info,
+ void *wrqu,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
- int *val = (int *)wrq->u.name;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
+ int *val = (int *) extra;
*val = priv->prefer_port3;
- orinoco_unlock(priv, &flags);
return 0;
}
-/* Spy is used for link quality/strength measurements in Ad-Hoc mode
- * Jean II */
-static int orinoco_ioctl_setspy(struct net_device *dev, struct iw_point *srq)
+static int orinoco_ioctl_setpreamble(struct net_device *dev,
+ struct iw_request_info *info,
+ void *wrqu,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
- struct sockaddr address[IW_MAX_SPY];
- int number = srq->length;
- int i;
- int err = 0;
unsigned long flags;
+ int val;
- /* Check the number of addresses */
- if (number > IW_MAX_SPY)
- return -E2BIG;
+ if (! priv->has_preamble)
+ return -EOPNOTSUPP;
- /* Get the data in the driver */
- if (srq->pointer) {
- if (copy_from_user(address, srq->pointer,
- sizeof(struct sockaddr) * number))
- return -EFAULT;
- }
+ /* 802.11b has recently defined some short preamble.
+ * Basically, the Phy header has been reduced in size.
+ * This increase performance, especially at high rates
+ * (the preamble is transmitted at 1Mb/s), unfortunately
+ * this give compatibility troubles... - Jean II */
+ val = *( (int *) extra );
- /* Make sure nobody mess with the structure while we do */
if (orinoco_lock(priv, &flags) != 0)
return -EBUSY;
- /* orinoco_lock() doesn't disable interrupts, so make sure the
- * interrupt rx path don't get confused while we copy */
- priv->spy_number = 0;
-
- if (number > 0) {
- /* Extract the addresses */
- for (i = 0; i < number; i++)
- memcpy(priv->spy_address[i], address[i].sa_data,
- ETH_ALEN);
- /* Reset stats */
- memset(priv->spy_stat, 0,
- sizeof(struct iw_quality) * IW_MAX_SPY);
- /* Set number of addresses */
- priv->spy_number = number;
- }
+ if (val)
+ priv->preamble = 1;
+ else
+ priv->preamble = 0;
- /* Now, let the others play */
orinoco_unlock(priv, &flags);
- return err;
+ return -EINPROGRESS; /* Call commit handler */
}
-static int orinoco_ioctl_getspy(struct net_device *dev, struct iw_point *srq)
+static int orinoco_ioctl_getpreamble(struct net_device *dev,
+ struct iw_request_info *info,
+ void *wrqu,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
- struct sockaddr address[IW_MAX_SPY];
- struct iw_quality spy_stat[IW_MAX_SPY];
- int number;
- int i;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- number = priv->spy_number;
- if ((number > 0) && (srq->pointer)) {
- /* Create address struct */
- for (i = 0; i < number; i++) {
- memcpy(address[i].sa_data, priv->spy_address[i],
- ETH_ALEN);
- address[i].sa_family = AF_UNIX;
- }
- /* Copy stats */
- /* In theory, we should disable irqs while copying the stats
- * because the rx path might update it in the middle...
- * Bah, who care ? - Jean II */
- memcpy(&spy_stat, priv->spy_stat,
- sizeof(struct iw_quality) * IW_MAX_SPY);
- for (i=0; i < number; i++)
- priv->spy_stat[i].updated = 0;
- }
-
- orinoco_unlock(priv, &flags);
+ int *val = (int *) extra;
- /* Push stuff to user space */
- srq->length = number;
- if(copy_to_user(srq->pointer, address,
- sizeof(struct sockaddr) * number))
- return -EFAULT;
- if(copy_to_user(srq->pointer + (sizeof(struct sockaddr)*number),
- &spy_stat, sizeof(struct iw_quality) * number))
- return -EFAULT;
+ if (! priv->has_preamble)
+ return -EOPNOTSUPP;
+ *val = priv->preamble;
return 0;
}
-static int
-orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+/* ioctl interface to hermes_read_ltv()
+ * To use with iwpriv, pass the RID as the token argument, e.g.
+ * iwpriv get_rid [0xfc00]
+ * At least Wireless Tools 25 is required to use iwpriv.
+ * For Wireless Tools 25 and 26 append "dummy" are the end. */
+static int orinoco_ioctl_getrid(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *data,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
- struct iwreq *wrq = (struct iwreq *)rq;
- int err = 0;
- int tmp;
- int changed = 0;
+ hermes_t *hw = &priv->hw;
+ int rid = data->flags;
+ u16 length;
+ int err;
unsigned long flags;
- TRACE_ENTER(dev->name);
+ /* It's a "get" function, but we don't want users to access the
+ * WEP key and other raw firmware data */
+ if (! capable(CAP_NET_ADMIN))
+ return -EPERM;
- /* In theory, we could allow most of the the SET stuff to be
- * done. In practice, the lapse of time at startup when the
- * card is not ready is very short, so why bother... Note
- * that netif_device_present is different from up/down
- * (ifconfig), when the device is not yet up, it is usually
- * already ready... Jean II */
- if (! netif_device_present(dev))
- return -ENODEV;
+ if (rid < 0xfc00 || rid > 0xffff)
+ return -EINVAL;
- switch (cmd) {
- case SIOCGIWNAME:
- strcpy(wrq->u.name, "IEEE 802.11-DS");
- break;
-
- case SIOCGIWAP:
- wrq->u.ap_addr.sa_family = ARPHRD_ETHER;
- err = orinoco_hw_get_bssid(priv, wrq->u.ap_addr.sa_data);
- break;
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
- case SIOCGIWRANGE:
- err = orinoco_ioctl_getiwrange(dev, &wrq->u.data);
- break;
+ err = hermes_read_ltv(hw, USER_BAP, rid, MAX_RID_LEN, &length,
+ extra);
+ if (err)
+ goto out;
- case SIOCSIWMODE:
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
- switch (wrq->u.mode) {
- case IW_MODE_ADHOC:
- if (! (priv->has_ibss || priv->has_port3) )
- err = -EINVAL;
- else {
- priv->iw_mode = IW_MODE_ADHOC;
- changed = 1;
- }
- break;
+ data->length = min_t(u16, HERMES_RECLEN_TO_BYTES(length),
+ MAX_RID_LEN);
- case IW_MODE_INFRA:
- priv->iw_mode = IW_MODE_INFRA;
- changed = 1;
- break;
+ out:
+ orinoco_unlock(priv, &flags);
+ return err;
+}
- default:
- err = -EINVAL;
- break;
- }
- set_port_type(priv);
- orinoco_unlock(priv, &flags);
- break;
+/* Trigger a scan (look for other cells in the vicinity */
+static int orinoco_ioctl_setscan(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *srq,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ unsigned long flags;
- case SIOCGIWMODE:
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
- wrq->u.mode = priv->iw_mode;
- orinoco_unlock(priv, &flags);
- break;
+ /* Note : you may have realised that, as this is a SET operation,
+ * this is privileged and therefore a normal user can't
+ * perform scanning.
+ * This is not an error, while the device perform scanning,
+ * traffic doesn't flow, so it's a perfect DoS...
+ * Jean II */
- case SIOCSIWENCODE:
- err = orinoco_ioctl_setiwencode(dev, &wrq->u.encoding);
- if (! err)
- changed = 1;
- break;
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
- case SIOCGIWENCODE:
- if (! capable(CAP_NET_ADMIN)) {
- err = -EPERM;
- break;
- }
+ /* Scanning with port 0 disabled would fail */
+ if (!netif_running(dev)) {
+ err = -ENETDOWN;
+ goto out;
+ }
- err = orinoco_ioctl_getiwencode(dev, &wrq->u.encoding);
- break;
+ /* In monitor mode, the scan results are always empty.
+ * Probe responses are passed to the driver as received
+ * frames and could be processed in software. */
+ if (priv->iw_mode == IW_MODE_MONITOR) {
+ err = -EOPNOTSUPP;
+ goto out;
+ }
- case SIOCSIWESSID:
- err = orinoco_ioctl_setessid(dev, &wrq->u.essid);
- if (! err)
- changed = 1;
- break;
+ /* Note : because we don't lock out the irq handler, the way
+ * we access scan variables in priv is critical.
+ * o scan_inprogress : not touched by irq handler
+ * o scan_mode : not touched by irq handler
+ * o scan_result : irq is strict producer, non-irq is strict
+ * consumer.
+ * o scan_len : synchronised with scan_result
+ * Before modifying anything on those variables, please think hard !
+ * Jean II */
- case SIOCGIWESSID:
- err = orinoco_ioctl_getessid(dev, &wrq->u.essid);
- break;
+ /* If there is still some left-over scan results, get rid of it */
+ if (priv->scan_result != NULL) {
+ /* What's likely is that a client did crash or was killed
+ * between triggering the scan request and reading the
+ * results, so we need to reset everything.
+ * Some clients that are too slow may suffer from that...
+ * Jean II */
+ kfree(priv->scan_result);
+ priv->scan_result = NULL;
+ }
- case SIOCSIWNICKN:
- err = orinoco_ioctl_setnick(dev, &wrq->u.data);
- if (! err)
- changed = 1;
- break;
+ /* Save flags */
+ priv->scan_mode = srq->flags;
- case SIOCGIWNICKN:
- err = orinoco_ioctl_getnick(dev, &wrq->u.data);
- break;
+ /* Always trigger scanning, even if it's in progress.
+ * This way, if the info frame get lost, we will recover somewhat
+ * gracefully - Jean II */
- case SIOCGIWFREQ:
- tmp = orinoco_hw_get_freq(priv);
- if (tmp < 0) {
- err = tmp;
- } else {
- wrq->u.freq.m = tmp;
- wrq->u.freq.e = 1;
+ if (priv->has_hostscan) {
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_SYMBOL:
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFHOSTSCAN_SYMBOL,
+ HERMES_HOSTSCAN_SYMBOL_ONCE |
+ HERMES_HOSTSCAN_SYMBOL_BCAST);
+ break;
+ case FIRMWARE_TYPE_INTERSIL: {
+ __le16 req[3];
+
+ req[0] = cpu_to_le16(0x3fff); /* All channels */
+ req[1] = cpu_to_le16(0x0001); /* rate 1 Mbps */
+ req[2] = 0; /* Any ESSID */
+ err = HERMES_WRITE_RECORD(hw, USER_BAP,
+ HERMES_RID_CNFHOSTSCAN, &req);
}
break;
+ case FIRMWARE_TYPE_AGERE:
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFSCANSSID_AGERE,
+ 0); /* Any ESSID */
+ if (err)
+ break;
- case SIOCSIWFREQ:
- err = orinoco_ioctl_setfreq(dev, &wrq->u.freq);
- if (! err)
- changed = 1;
- break;
-
- case SIOCGIWSENS:
- err = orinoco_ioctl_getsens(dev, &wrq->u.sens);
- break;
+ err = hermes_inquire(hw, HERMES_INQ_SCAN);
+ break;
+ }
+ } else
+ err = hermes_inquire(hw, HERMES_INQ_SCAN);
- case SIOCSIWSENS:
- err = orinoco_ioctl_setsens(dev, &wrq->u.sens);
- if (! err)
- changed = 1;
- break;
+ /* One more client */
+ if (! err)
+ priv->scan_inprogress = 1;
- case SIOCGIWRTS:
- wrq->u.rts.value = priv->rts_thresh;
- wrq->u.rts.disabled = (wrq->u.rts.value == 2347);
- wrq->u.rts.fixed = 1;
- break;
+ out:
+ orinoco_unlock(priv, &flags);
+ return err;
+}
- case SIOCSIWRTS:
- err = orinoco_ioctl_setrts(dev, &wrq->u.rts);
- if (! err)
- changed = 1;
- break;
+/* Translate scan data returned from the card to a card independant
+ * format that the Wireless Tools will understand - Jean II
+ * Return message length or -errno for fatal errors */
+static inline int orinoco_translate_scan(struct net_device *dev,
+ char *buffer,
+ char *scan,
+ int scan_len)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int offset; /* In the scan data */
+ union hermes_scan_info *atom;
+ int atom_len;
+ u16 capabilities;
+ u16 channel;
+ struct iw_event iwe; /* Temporary buffer */
+ char * current_ev = buffer;
+ char * end_buf = buffer + IW_SCAN_MAX_DATA;
- case SIOCSIWFRAG:
- err = orinoco_ioctl_setfrag(dev, &wrq->u.frag);
- if (! err)
- changed = 1;
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_AGERE:
+ atom_len = sizeof(struct agere_scan_apinfo);
+ offset = 0;
break;
-
- case SIOCGIWFRAG:
- err = orinoco_ioctl_getfrag(dev, &wrq->u.frag);
+ case FIRMWARE_TYPE_SYMBOL:
+ /* Lack of documentation necessitates this hack.
+ * Different firmwares have 68 or 76 byte long atoms.
+ * We try modulo first. If the length divides by both,
+ * we check what would be the channel in the second
+ * frame for a 68-byte atom. 76-byte atoms have 0 there.
+ * Valid channel cannot be 0. */
+ if (scan_len % 76)
+ atom_len = 68;
+ else if (scan_len % 68)
+ atom_len = 76;
+ else if (scan_len >= 1292 && scan[68] == 0)
+ atom_len = 76;
+ else
+ atom_len = 68;
+ offset = 0;
break;
-
- case SIOCSIWRATE:
- err = orinoco_ioctl_setrate(dev, &wrq->u.bitrate);
- if (! err)
- changed = 1;
+ case FIRMWARE_TYPE_INTERSIL:
+ offset = 4;
+ if (priv->has_hostscan) {
+ atom_len = le16_to_cpup((__le16 *)scan);
+ /* Sanity check for atom_len */
+ if (atom_len < sizeof(struct prism2_scan_apinfo)) {
+ printk(KERN_ERR "%s: Invalid atom_len in scan data: %d\n",
+ dev->name, atom_len);
+ return -EIO;
+ }
+ } else
+ atom_len = offsetof(struct prism2_scan_apinfo, atim);
break;
+ default:
+ return -EOPNOTSUPP;
+ }
- case SIOCGIWRATE:
- err = orinoco_ioctl_getrate(dev, &wrq->u.bitrate);
- break;
+ /* Check that we got an whole number of atoms */
+ if ((scan_len - offset) % atom_len) {
+ printk(KERN_ERR "%s: Unexpected scan data length %d, "
+ "atom_len %d, offset %d\n", dev->name, scan_len,
+ atom_len, offset);
+ return -EIO;
+ }
- case SIOCSIWPOWER:
- err = orinoco_ioctl_setpower(dev, &wrq->u.power);
- if (! err)
- changed = 1;
- break;
+ /* Read the entries one by one */
+ for (; offset + atom_len <= scan_len; offset += atom_len) {
+ /* Get next atom */
+ atom = (union hermes_scan_info *) (scan + offset);
+
+ /* First entry *MUST* be the AP MAC address */
+ iwe.cmd = SIOCGIWAP;
+ iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
+ memcpy(iwe.u.ap_addr.sa_data, atom->a.bssid, ETH_ALEN);
+ current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN);
+
+ /* Other entries will be displayed in the order we give them */
+
+ /* Add the ESSID */
+ iwe.u.data.length = le16_to_cpu(atom->a.essid_len);
+ if (iwe.u.data.length > 32)
+ iwe.u.data.length = 32;
+ iwe.cmd = SIOCGIWESSID;
+ iwe.u.data.flags = 1;
+ current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, atom->a.essid);
+
+ /* Add mode */
+ iwe.cmd = SIOCGIWMODE;
+ capabilities = le16_to_cpu(atom->a.capabilities);
+ if (capabilities & 0x3) {
+ if (capabilities & 0x1)
+ iwe.u.mode = IW_MODE_MASTER;
+ else
+ iwe.u.mode = IW_MODE_ADHOC;
+ current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_UINT_LEN);
+ }
- case SIOCGIWPOWER:
- err = orinoco_ioctl_getpower(dev, &wrq->u.power);
- break;
+ channel = atom->s.channel;
+ if ( (channel >= 1) && (channel <= NUM_CHANNELS) ) {
+ /* Add frequency */
+ iwe.cmd = SIOCGIWFREQ;
+ iwe.u.freq.m = channel_frequency[channel-1] * 100000;
+ iwe.u.freq.e = 1;
+ current_ev = iwe_stream_add_event(current_ev, end_buf,
+ &iwe, IW_EV_FREQ_LEN);
+ }
- case SIOCGIWTXPOW:
- /* The card only supports one tx power, so this is easy */
- wrq->u.txpower.value = 15; /* dBm */
- wrq->u.txpower.fixed = 1;
- wrq->u.txpower.disabled = 0;
- wrq->u.txpower.flags = IW_TXPOW_DBM;
- break;
+ /* Add quality statistics */
+ iwe.cmd = IWEVQUAL;
+ iwe.u.qual.updated = 0x10; /* no link quality */
+ iwe.u.qual.level = (__u8) le16_to_cpu(atom->a.level) - 0x95;
+ iwe.u.qual.noise = (__u8) le16_to_cpu(atom->a.noise) - 0x95;
+ /* Wireless tools prior to 27.pre22 will show link quality
+ * anyway, so we provide a reasonable value. */
+ if (iwe.u.qual.level > iwe.u.qual.noise)
+ iwe.u.qual.qual = iwe.u.qual.level - iwe.u.qual.noise;
+ else
+ iwe.u.qual.qual = 0;
+ current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN);
- case SIOCSIWRETRY:
- err = -EOPNOTSUPP;
- break;
+ /* Add encryption capability */
+ iwe.cmd = SIOCGIWENCODE;
+ if (capabilities & 0x10)
+ iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
+ else
+ iwe.u.data.flags = IW_ENCODE_DISABLED;
+ iwe.u.data.length = 0;
+ current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, atom->a.essid);
+
+ /* Bit rate is not available in Lucent/Agere firmwares */
+ if (priv->firmware_type != FIRMWARE_TYPE_AGERE) {
+ char * current_val = current_ev + IW_EV_LCP_LEN;
+ int i;
+ int step;
+
+ if (priv->firmware_type == FIRMWARE_TYPE_SYMBOL)
+ step = 2;
+ else
+ step = 1;
+
+ iwe.cmd = SIOCGIWRATE;
+ /* Those two flags are ignored... */
+ iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
+ /* Max 10 values */
+ for (i = 0; i < 10; i += step) {
+ /* NULL terminated */
+ if (atom->p.rates[i] == 0x0)
+ break;
+ /* Bit rate given in 500 kb/s units (+ 0x80) */
+ iwe.u.bitrate.value = ((atom->p.rates[i] & 0x7f) * 500000);
+ current_val = iwe_stream_add_value(current_ev, current_val,
+ end_buf, &iwe,
+ IW_EV_PARAM_LEN);
+ }
+ /* Check if we added any event */
+ if ((current_val - current_ev) > IW_EV_LCP_LEN)
+ current_ev = current_val;
+ }
- case SIOCGIWRETRY:
- err = orinoco_ioctl_getretry(dev, &wrq->u.retry);
- break;
+ /* The other data in the scan result are not really
+ * interesting, so for now drop it - Jean II */
+ }
+ return current_ev - buffer;
+}
- case SIOCSIWSPY:
- err = orinoco_ioctl_setspy(dev, &wrq->u.data);
- break;
+/* Return results of a scan */
+static int orinoco_ioctl_getscan(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *srq,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int err = 0;
+ unsigned long flags;
- case SIOCGIWSPY:
- err = orinoco_ioctl_getspy(dev, &wrq->u.data);
- break;
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
- case SIOCGIWPRIV:
- if (wrq->u.data.pointer) {
- struct iw_priv_args privtab[] = {
- { SIOCIWFIRSTPRIV + 0x0, 0, 0, "force_reset" },
- { SIOCIWFIRSTPRIV + 0x1, 0, 0, "card_reset" },
- { SIOCIWFIRSTPRIV + 0x2,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- 0, "set_port3" },
- { SIOCIWFIRSTPRIV + 0x3, 0,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "get_port3" },
- { SIOCIWFIRSTPRIV + 0x4,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- 0, "set_preamble" },
- { SIOCIWFIRSTPRIV + 0x5, 0,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "get_preamble" },
- { SIOCIWFIRSTPRIV + 0x6,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- 0, "set_ibssport" },
- { SIOCIWFIRSTPRIV + 0x7, 0,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "get_ibssport" },
- { SIOCIWLASTPRIV, 0, 0, "dump_recs" },
- };
-
- wrq->u.data.length = sizeof(privtab) / sizeof(privtab[0]);
- if (copy_to_user(wrq->u.data.pointer, privtab, sizeof(privtab)))
- err = -EFAULT;
- }
- break;
-
- case SIOCIWFIRSTPRIV + 0x0: /* force_reset */
- case SIOCIWFIRSTPRIV + 0x1: /* card_reset */
- if (! capable(CAP_NET_ADMIN)) {
- err = -EPERM;
- break;
- }
-
- printk(KERN_DEBUG "%s: Force scheduling reset!\n", dev->name);
+ /* If no results yet, ask to try again later */
+ if (priv->scan_result == NULL) {
+ if (priv->scan_inprogress)
+ /* Important note : we don't want to block the caller
+ * until results are ready for various reasons.
+ * First, managing wait queues is complex and racy.
+ * Second, we grab some rtnetlink lock before comming
+ * here (in dev_ioctl()).
+ * Third, we generate an Wireless Event, so the
+ * caller can wait itself on that - Jean II */
+ err = -EAGAIN;
+ else
+ /* Client error, no scan results...
+ * The caller need to restart the scan. */
+ err = -ENODATA;
+ } else {
+ /* We have some results to push back to user space */
- schedule_work(&priv->reset_work);
- break;
+ /* Translate to WE format */
+ int ret = orinoco_translate_scan(dev, extra,
+ priv->scan_result,
+ priv->scan_len);
- case SIOCIWFIRSTPRIV + 0x2: /* set_port3 */
- if (! capable(CAP_NET_ADMIN)) {
- err = -EPERM;
- break;
- }
+ if (ret < 0) {
+ err = ret;
+ kfree(priv->scan_result);
+ priv->scan_result = NULL;
+ } else {
+ srq->length = ret;
- err = orinoco_ioctl_setport3(dev, wrq);
- if (! err)
- changed = 1;
- break;
+ /* Return flags */
+ srq->flags = (__u16) priv->scan_mode;
- case SIOCIWFIRSTPRIV + 0x3: /* get_port3 */
- err = orinoco_ioctl_getport3(dev, wrq);
- break;
+ /* In any case, Scan results will be cleaned up in the
+ * reset function and when exiting the driver.
+ * The person triggering the scanning may never come to
+ * pick the results, so we need to do it in those places.
+ * Jean II */
- case SIOCIWFIRSTPRIV + 0x4: /* set_preamble */
- if (! capable(CAP_NET_ADMIN)) {
- err = -EPERM;
- break;
+#ifdef SCAN_SINGLE_READ
+ /* If you enable this option, only one client (the first
+ * one) will be able to read the result (and only one
+ * time). If there is multiple concurent clients that
+ * want to read scan results, this behavior is not
+ * advisable - Jean II */
+ kfree(priv->scan_result);
+ priv->scan_result = NULL;
+#endif /* SCAN_SINGLE_READ */
+ /* Here, if too much time has elapsed since last scan,
+ * we may want to clean up scan results... - Jean II */
}
- /* 802.11b has recently defined some short preamble.
- * Basically, the Phy header has been reduced in size.
- * This increase performance, especially at high rates
- * (the preamble is transmitted at 1Mb/s), unfortunately
- * this give compatibility troubles... - Jean II */
- if(priv->has_preamble) {
- int val = *( (int *) wrq->u.name );
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
- if (val)
- priv->preamble = 1;
- else
- priv->preamble = 0;
- orinoco_unlock(priv, &flags);
- changed = 1;
- } else
- err = -EOPNOTSUPP;
- break;
+ /* Scan is no longer in progress */
+ priv->scan_inprogress = 0;
+ }
+
+ orinoco_unlock(priv, &flags);
+ return err;
+}
- case SIOCIWFIRSTPRIV + 0x5: /* get_preamble */
- if(priv->has_preamble) {
- int *val = (int *)wrq->u.name;
+/* Commit handler, called after set operations */
+static int orinoco_ioctl_commit(struct net_device *dev,
+ struct iw_request_info *info,
+ void *wrqu,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct hermes *hw = &priv->hw;
+ unsigned long flags;
+ int err = 0;
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
- *val = priv->preamble;
- orinoco_unlock(priv, &flags);
- } else
- err = -EOPNOTSUPP;
- break;
- case SIOCIWFIRSTPRIV + 0x6: /* set_ibssport */
- if (! capable(CAP_NET_ADMIN)) {
- err = -EPERM;
- break;
- }
+ if (!priv->open)
+ return 0;
- err = orinoco_ioctl_setibssport(dev, wrq);
- if (! err)
- changed = 1;
- break;
+ if (priv->broken_disableport) {
+ orinoco_reset(dev);
+ return 0;
+ }
- case SIOCIWFIRSTPRIV + 0x7: /* get_ibssport */
- err = orinoco_ioctl_getibssport(dev, wrq);
- break;
+ if (orinoco_lock(priv, &flags) != 0)
+ return err;
- case SIOCIWLASTPRIV:
- err = orinoco_debug_dump_recs(dev);
- if (err)
- printk(KERN_ERR "%s: Unable to dump records (%d)\n",
- dev->name, err);
- break;
+ err = hermes_disable_port(hw, 0);
+ if (err) {
+ printk(KERN_WARNING "%s: Unable to disable port "
+ "while reconfiguring card\n", dev->name);
+ priv->broken_disableport = 1;
+ goto out;
+ }
+ err = __orinoco_program_rids(dev);
+ if (err) {
+ printk(KERN_WARNING "%s: Unable to reconfigure card\n",
+ dev->name);
+ goto out;
+ }
- default:
- err = -EOPNOTSUPP;
+ err = hermes_enable_port(hw, 0);
+ if (err) {
+ printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n",
+ dev->name);
+ goto out;
}
-
- if (! err && changed && netif_running(dev)) {
- err = orinoco_reconfigure(dev);
- }
- TRACE_EXIT(dev->name);
+ out:
+ if (err) {
+ printk(KERN_WARNING "%s: Resetting instead...\n", dev->name);
+ schedule_work(&priv->reset_work);
+ err = 0;
+ }
+ orinoco_unlock(priv, &flags);
return err;
}
-struct {
- u16 rid;
- char *name;
- int displaytype;
-#define DISPLAY_WORDS 0
-#define DISPLAY_BYTES 1
-#define DISPLAY_STRING 2
-#define DISPLAY_XSTRING 3
-} record_table[] = {
-#define DEBUG_REC(name,type) { HERMES_RID_##name, #name, DISPLAY_##type }
- DEBUG_REC(CNFPORTTYPE,WORDS),
- DEBUG_REC(CNFOWNMACADDR,BYTES),
- DEBUG_REC(CNFDESIREDSSID,STRING),
- DEBUG_REC(CNFOWNCHANNEL,WORDS),
- DEBUG_REC(CNFOWNSSID,STRING),
- DEBUG_REC(CNFOWNATIMWINDOW,WORDS),
- DEBUG_REC(CNFSYSTEMSCALE,WORDS),
- DEBUG_REC(CNFMAXDATALEN,WORDS),
- DEBUG_REC(CNFPMENABLED,WORDS),
- DEBUG_REC(CNFPMEPS,WORDS),
- DEBUG_REC(CNFMULTICASTRECEIVE,WORDS),
- DEBUG_REC(CNFMAXSLEEPDURATION,WORDS),
- DEBUG_REC(CNFPMHOLDOVERDURATION,WORDS),
- DEBUG_REC(CNFOWNNAME,STRING),
- DEBUG_REC(CNFOWNDTIMPERIOD,WORDS),
- DEBUG_REC(CNFMULTICASTPMBUFFERING,WORDS),
- DEBUG_REC(CNFWEPENABLED_AGERE,WORDS),
- DEBUG_REC(CNFMANDATORYBSSID_SYMBOL,WORDS),
- DEBUG_REC(CNFWEPDEFAULTKEYID,WORDS),
- DEBUG_REC(CNFDEFAULTKEY0,BYTES),
- DEBUG_REC(CNFDEFAULTKEY1,BYTES),
- DEBUG_REC(CNFMWOROBUST_AGERE,WORDS),
- DEBUG_REC(CNFDEFAULTKEY2,BYTES),
- DEBUG_REC(CNFDEFAULTKEY3,BYTES),
- DEBUG_REC(CNFWEPFLAGS_INTERSIL,WORDS),
- DEBUG_REC(CNFWEPKEYMAPPINGTABLE,WORDS),
- DEBUG_REC(CNFAUTHENTICATION,WORDS),
- DEBUG_REC(CNFMAXASSOCSTA,WORDS),
- DEBUG_REC(CNFKEYLENGTH_SYMBOL,WORDS),
- DEBUG_REC(CNFTXCONTROL,WORDS),
- DEBUG_REC(CNFROAMINGMODE,WORDS),
- DEBUG_REC(CNFHOSTAUTHENTICATION,WORDS),
- DEBUG_REC(CNFRCVCRCERROR,WORDS),
- DEBUG_REC(CNFMMLIFE,WORDS),
- DEBUG_REC(CNFALTRETRYCOUNT,WORDS),
- DEBUG_REC(CNFBEACONINT,WORDS),
- DEBUG_REC(CNFAPPCFINFO,WORDS),
- DEBUG_REC(CNFSTAPCFINFO,WORDS),
- DEBUG_REC(CNFPRIORITYQUSAGE,WORDS),
- DEBUG_REC(CNFTIMCTRL,WORDS),
- DEBUG_REC(CNFTHIRTY2TALLY,WORDS),
- DEBUG_REC(CNFENHSECURITY,WORDS),
- DEBUG_REC(CNFGROUPADDRESSES,BYTES),
- DEBUG_REC(CNFCREATEIBSS,WORDS),
- DEBUG_REC(CNFFRAGMENTATIONTHRESHOLD,WORDS),
- DEBUG_REC(CNFRTSTHRESHOLD,WORDS),
- DEBUG_REC(CNFTXRATECONTROL,WORDS),
- DEBUG_REC(CNFPROMISCUOUSMODE,WORDS),
- DEBUG_REC(CNFBASICRATES_SYMBOL,WORDS),
- DEBUG_REC(CNFPREAMBLE_SYMBOL,WORDS),
- DEBUG_REC(CNFSHORTPREAMBLE,WORDS),
- DEBUG_REC(CNFWEPKEYS_AGERE,BYTES),
- DEBUG_REC(CNFEXCLUDELONGPREAMBLE,WORDS),
- DEBUG_REC(CNFTXKEY_AGERE,WORDS),
- DEBUG_REC(CNFAUTHENTICATIONRSPTO,WORDS),
- DEBUG_REC(CNFBASICRATES,WORDS),
- DEBUG_REC(CNFSUPPORTEDRATES,WORDS),
- DEBUG_REC(CNFTICKTIME,WORDS),
- DEBUG_REC(CNFSCANREQUEST,WORDS),
- DEBUG_REC(CNFJOINREQUEST,WORDS),
- DEBUG_REC(CNFAUTHENTICATESTATION,WORDS),
- DEBUG_REC(CNFCHANNELINFOREQUEST,WORDS),
- DEBUG_REC(MAXLOADTIME,WORDS),
- DEBUG_REC(DOWNLOADBUFFER,WORDS),
- DEBUG_REC(PRIID,WORDS),
- DEBUG_REC(PRISUPRANGE,WORDS),
- DEBUG_REC(CFIACTRANGES,WORDS),
- DEBUG_REC(NICSERNUM,XSTRING),
- DEBUG_REC(NICID,WORDS),
- DEBUG_REC(MFISUPRANGE,WORDS),
- DEBUG_REC(CFISUPRANGE,WORDS),
- DEBUG_REC(CHANNELLIST,WORDS),
- DEBUG_REC(REGULATORYDOMAINS,WORDS),
- DEBUG_REC(TEMPTYPE,WORDS),
-/* DEBUG_REC(CIS,BYTES), */
- DEBUG_REC(STAID,WORDS),
- DEBUG_REC(CURRENTSSID,STRING),
- DEBUG_REC(CURRENTBSSID,BYTES),
- DEBUG_REC(COMMSQUALITY,WORDS),
- DEBUG_REC(CURRENTTXRATE,WORDS),
- DEBUG_REC(CURRENTBEACONINTERVAL,WORDS),
- DEBUG_REC(CURRENTSCALETHRESHOLDS,WORDS),
- DEBUG_REC(PROTOCOLRSPTIME,WORDS),
- DEBUG_REC(SHORTRETRYLIMIT,WORDS),
- DEBUG_REC(LONGRETRYLIMIT,WORDS),
- DEBUG_REC(MAXTRANSMITLIFETIME,WORDS),
- DEBUG_REC(MAXRECEIVELIFETIME,WORDS),
- DEBUG_REC(CFPOLLABLE,WORDS),
- DEBUG_REC(AUTHENTICATIONALGORITHMS,WORDS),
- DEBUG_REC(PRIVACYOPTIONIMPLEMENTED,WORDS),
- DEBUG_REC(OWNMACADDR,BYTES),
- DEBUG_REC(SCANRESULTSTABLE,WORDS),
- DEBUG_REC(PHYTYPE,WORDS),
- DEBUG_REC(CURRENTCHANNEL,WORDS),
- DEBUG_REC(CURRENTPOWERSTATE,WORDS),
- DEBUG_REC(CCAMODE,WORDS),
- DEBUG_REC(SUPPORTEDDATARATES,WORDS),
- DEBUG_REC(BUILDSEQ,BYTES),
- DEBUG_REC(FWID,XSTRING)
-#undef DEBUG_REC
+static const struct iw_priv_args orinoco_privtab[] = {
+ { SIOCIWFIRSTPRIV + 0x0, 0, 0, "force_reset" },
+ { SIOCIWFIRSTPRIV + 0x1, 0, 0, "card_reset" },
+ { SIOCIWFIRSTPRIV + 0x2, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ 0, "set_port3" },
+ { SIOCIWFIRSTPRIV + 0x3, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ "get_port3" },
+ { SIOCIWFIRSTPRIV + 0x4, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ 0, "set_preamble" },
+ { SIOCIWFIRSTPRIV + 0x5, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ "get_preamble" },
+ { SIOCIWFIRSTPRIV + 0x6, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ 0, "set_ibssport" },
+ { SIOCIWFIRSTPRIV + 0x7, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ "get_ibssport" },
+ { SIOCIWFIRSTPRIV + 0x9, 0, IW_PRIV_TYPE_BYTE | MAX_RID_LEN,
+ "get_rid" },
};
-#define DEBUG_LTV_SIZE 128
-static int orinoco_debug_dump_recs(struct net_device *dev)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- hermes_t *hw = &priv->hw;
- u8 *val8;
- u16 *val16;
- int i,j;
- u16 length;
- int err;
-
- /* I'm not sure: we might have a lock here, so we'd better go
- atomic, just in case. */
- val8 = kmalloc(DEBUG_LTV_SIZE + 2, GFP_ATOMIC);
- if (! val8)
- return -ENOMEM;
- val16 = (u16 *)val8;
-
- for (i = 0; i < ARRAY_SIZE(record_table); i++) {
- u16 rid = record_table[i].rid;
- int len;
-
- memset(val8, 0, DEBUG_LTV_SIZE + 2);
-
- err = hermes_read_ltv(hw, USER_BAP, rid, DEBUG_LTV_SIZE,
- &length, val8);
- if (err) {
- DEBUG(0, "Error %d reading RID 0x%04x\n", err, rid);
- continue;
- }
- val16 = (u16 *)val8;
- if (length == 0)
- continue;
-
- printk(KERN_DEBUG "%-15s (0x%04x): length=%d (%d bytes)\tvalue=",
- record_table[i].name,
- rid, length, (length-1)*2);
- len = min(((int)length-1)*2, DEBUG_LTV_SIZE);
-
- switch (record_table[i].displaytype) {
- case DISPLAY_WORDS:
- for (j = 0; j < len / 2; j++)
- printk("%04X-", le16_to_cpu(val16[j]));
- break;
+/*
+ * Structures to export the Wireless Handlers
+ */
- case DISPLAY_BYTES:
- default:
- for (j = 0; j < len; j++)
- printk("%02X:", val8[j]);
- break;
+static const iw_handler orinoco_handler[] = {
+ [SIOCSIWCOMMIT-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_commit,
+ [SIOCGIWNAME -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getname,
+ [SIOCSIWFREQ -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setfreq,
+ [SIOCGIWFREQ -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getfreq,
+ [SIOCSIWMODE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setmode,
+ [SIOCGIWMODE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getmode,
+ [SIOCSIWSENS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setsens,
+ [SIOCGIWSENS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getsens,
+ [SIOCGIWRANGE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getiwrange,
+ [SIOCSIWSPY -SIOCIWFIRST] = (iw_handler) iw_handler_set_spy,
+ [SIOCGIWSPY -SIOCIWFIRST] = (iw_handler) iw_handler_get_spy,
+ [SIOCSIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_set_thrspy,
+ [SIOCGIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_get_thrspy,
+ [SIOCSIWAP -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setwap,
+ [SIOCGIWAP -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getwap,
+ [SIOCSIWSCAN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setscan,
+ [SIOCGIWSCAN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getscan,
+ [SIOCSIWESSID -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setessid,
+ [SIOCGIWESSID -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getessid,
+ [SIOCSIWNICKN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setnick,
+ [SIOCGIWNICKN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getnick,
+ [SIOCSIWRATE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setrate,
+ [SIOCGIWRATE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getrate,
+ [SIOCSIWRTS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setrts,
+ [SIOCGIWRTS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getrts,
+ [SIOCSIWFRAG -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setfrag,
+ [SIOCGIWFRAG -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getfrag,
+ [SIOCGIWRETRY -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getretry,
+ [SIOCSIWENCODE-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setiwencode,
+ [SIOCGIWENCODE-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getiwencode,
+ [SIOCSIWPOWER -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setpower,
+ [SIOCGIWPOWER -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getpower,
+};
- case DISPLAY_STRING:
- len = min(len, le16_to_cpu(val16[0])+2);
- val8[len] = '\0';
- printk("\"%s\"", (char *)&val16[1]);
- break;
- case DISPLAY_XSTRING:
- printk("'%s'", (char *)val8);
- }
+/*
+ Added typecasting since we no longer use iwreq_data -- Moustafa
+ */
+static const iw_handler orinoco_private_handler[] = {
+ [0] = (iw_handler) orinoco_ioctl_reset,
+ [1] = (iw_handler) orinoco_ioctl_reset,
+ [2] = (iw_handler) orinoco_ioctl_setport3,
+ [3] = (iw_handler) orinoco_ioctl_getport3,
+ [4] = (iw_handler) orinoco_ioctl_setpreamble,
+ [5] = (iw_handler) orinoco_ioctl_getpreamble,
+ [6] = (iw_handler) orinoco_ioctl_setibssport,
+ [7] = (iw_handler) orinoco_ioctl_getibssport,
+ [9] = (iw_handler) orinoco_ioctl_getrid,
+};
- printk("\n");
- }
+static const struct iw_handler_def orinoco_handler_def = {
+ .num_standard = ARRAY_SIZE(orinoco_handler),
+ .num_private = ARRAY_SIZE(orinoco_private_handler),
+ .num_private_args = ARRAY_SIZE(orinoco_privtab),
+ .standard = orinoco_handler,
+ .private = orinoco_private_handler,
+ .private_args = orinoco_privtab,
+ .get_wireless_stats = orinoco_get_wireless_stats,
+};
- kfree(val8);
+static void orinoco_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
- return 0;
+ strncpy(info->driver, DRIVER_NAME, sizeof(info->driver) - 1);
+ strncpy(info->version, DRIVER_VERSION, sizeof(info->version) - 1);
+ strncpy(info->fw_version, priv->fw_name, sizeof(info->fw_version) - 1);
+ if (dev->class_dev.dev)
+ strncpy(info->bus_info, dev->class_dev.dev->bus_id,
+ sizeof(info->bus_info) - 1);
+ else
+ snprintf(info->bus_info, sizeof(info->bus_info) - 1,
+ "PCMCIA %p", priv->hw.iobase);
}
+static struct ethtool_ops orinoco_ethtool_ops = {
+ .get_drvinfo = orinoco_get_drvinfo,
+ .get_link = ethtool_op_get_link,
+};
+
/********************************************************************/
/* Debugging */
/********************************************************************/
EXPORT_SYMBOL(__orinoco_up);
EXPORT_SYMBOL(__orinoco_down);
-EXPORT_SYMBOL(orinoco_stop);
EXPORT_SYMBOL(orinoco_reinit_firmware);
EXPORT_SYMBOL(orinoco_interrupt);
git://git.onelab.eu / linux-2.6.git / blobdiff