-/* orinoco.c 0.13e - (formerly known as dldwd_cs.c and orinoco_cs.c)
+/* orinoco.c - (formerly known as dldwd_cs.c and orinoco_cs.c)
*
* A driver for Hermes or Prism 2 chipset based PCMCIA wireless
* adaptors, with Lucent/Agere, Intersil or Symbol firmware.
*
- * Copyright (C) 2000 David Gibson, Linuxcare Australia <hermes@gibson.dropbear.id.au>
+ * Current maintainers (as of 29 September 2003) are:
+ * Pavel Roskin <proski AT gnu.org>
+ * and David Gibson <hermes AT gibson.dropbear.id.au>
+ *
+ * (C) Copyright David Gibson, IBM Corporation 2001-2003.
+ * Copyright (C) 2000 David Gibson, Linuxcare Australia.
* With some help from :
- * Copyright (C) 2001 Jean Tourrilhes, HP Labs <jt@hpl.hp.com>
- * Copyright (C) 2001 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ * Copyright (C) 2001 Jean Tourrilhes, HP Labs
+ * Copyright (C) 2001 Benjamin Herrenschmidt
*
* Based on dummy_cs.c 1.27 2000/06/12 21:27:25
*
- * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus <andy@fasta.fh-dortmund.de>
- * http://www.fasta.fh-dortmund.de/users/andy/wvlan/
+ * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus <andy
+ * AT fasta.fh-dortmund.de>
+ * http://www.stud.fh-dortmund.de/~andy/wvlan/
*
* The contents of this file are subject to the Mozilla Public License
* Version 1.1 (the "License"); you may not use this file except in
* limitations under the License.
*
* The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>. Portions created by David
+ * <dahinds AT users.sourceforge.net>. Portions created by David
* A. Hinds are Copyright (C) 1999 David A. Hinds. All Rights
* Reserved.
*
* o Add PM timeout (holdover duration)
* o Enable "iwconfig eth0 key off" and friends (toggle flags)
* o Enable "iwconfig eth0 power unicast/all" (toggle flags)
- * o Try with an intel card. It report firmware 1.01, behave like
+ * o Try with an Intel card. It report firmware 1.01, behave like
* an antiquated firmware, however on windows it says 2.00. Yuck !
* o Workaround firmware bug in allocate buffer (Intel 1.01)
* o Finish external renaming to orinoco...
* o Update to Wireless 11 -> add retry limit/lifetime support
* o Tested with a D-Link DWL 650 card, fill in firmware support
* o Warning on Vcc mismatch (D-Link 3.3v card in Lucent 5v only slot)
- * o Fixed the Prims2 WEP bugs that I introduced in v0.03 :-(
- * It work on D-Link *only* after a tcpdump. Weird...
+ * o Fixed the Prism2 WEP bugs that I introduced in v0.03 :-(
+ * It works on D-Link *only* after a tcpdump. Weird...
* And still doesn't work on Intel card. Grrrr...
* o Update the mode after a setport3
* o Add preamble setting for Symbol cards (not yet enabled)
* o Clean up RID definitions in hermes.h, other cleanups
*
* v0.04b -> v0.04c - 24/4/2001 - Jean II
- * o Tim Hurley <timster@seiki.bliztech.com> reported a D-Link card
+ * o Tim Hurley <timster AT seiki.bliztech.com> reported a D-Link card
* with vendor 02 and firmware 0.08. Added in the capabilities...
* o Tested Lucent firmware 7.28, everything works...
*
* o Remove deferred power enabling code
*
* v0.05c -> v0.05d - 5/5/2001 - Jean II
- * o Workaround to SNAP decapsulate frame from LinkSys AP
- * original patch from : Dong Liu <dliu@research.bell-labs.com>
+ * o Workaround to SNAP decapsulate frame from Linksys AP
+ * original patch from : Dong Liu <dliu AT research.bell-labs.com>
* (note : the memcmp bug was mine - fixed)
* o Remove set_retry stuff, no firmware support it (bloat--).
*
* v0.05d -> v0.06 - 25/5/2001 - Jean II
- * Original patch from "Hong Lin" <alin@redhat.com>,
- * "Ian Kinner" <ikinner@redhat.com>
- * and "David Smith" <dsmith@redhat.com>
+ * Original patch from "Hong Lin" <alin AT redhat.com>,
+ * "Ian Kinner" <ikinner AT redhat.com>
+ * and "David Smith" <dsmith AT redhat.com>
* o Init of priv->tx_rate_ctrl in firmware specific section.
* o Prism2/Symbol rate, upto should be 0xF and not 0x15. Doh !
* o Spectrum card always need cor_reset (for every reset)
*
* v0.06c -> v0.06d - 6/7/2001 - David Gibson
* o Change a bunch of KERN_INFO messages to KERN_DEBUG, as per Linus'
- * wishes to reduce the number of unecessary messages.
+ * wishes to reduce the number of unnecessary messages.
* o Removed bogus message on CRC error.
- * o Merged fixeds for v0.08 Prism 2 firmware from William Waghorn
- * <willwaghorn@yahoo.co.uk>
+ * o Merged fixes for v0.08 Prism 2 firmware from William Waghorn
+ * <willwaghorn AT yahoo.co.uk>
* o Slight cleanup/re-arrangement of firmware detection code.
*
* v0.06d -> v0.06e - 1/8/2001 - David Gibson
* o Removed some redundant global initializers (orinoco_cs.c).
- * o Added some module metadataa
+ * o Added some module metadata
*
* v0.06e -> v0.06f - 14/8/2001 - David Gibson
* o Wording fix to license
* v0.07 -> v0.07a - 1/10/3001 - Jean II
* o Add code to read Symbol firmware revision, inspired by latest code
* in Spectrum24 by Lee John Keyser-Allen - Thanks Lee !
- * o Thanks to Jared Valentine <hidden@xmission.com> for "providing" me
+ * o Thanks to Jared Valentine <hidden AT xmission.com> for "providing" me
* a 3Com card with a recent firmware, fill out Symbol firmware
* capabilities of latest rev (2.20), as well as older Symbol cards.
* o Disable Power Management in newer Symbol firmware, the API
* o Turned has_big_wep on for Intersil cards. That's not true for all of
* them but we should at least let the capable ones try.
* o Wait for BUSY to clear at the beginning of hermes_bap_seek(). I
- * realised that my assumption that the driver's serialization
+ * realized that my assumption that the driver's serialization
* would prevent the BAP being busy on entry was possibly false, because
* things other than seeks may make the BAP busy.
* o Use "alternate" (oui 00:00:00) encapsulation by default.
* o Don't try to make __initdata const (the version string). This can't
* work because of the way the __initdata sectioning works.
* o Added MODULE_LICENSE tags.
- * o Support for PLX (transparent PCMCIA->PCI brdge) cards.
- * o Changed to using the new type-facist min/max.
+ * o Support for PLX (transparent PCMCIA->PCI bridge) cards.
+ * o Changed to using the new type-fascist min/max.
*
* v0.08 -> v0.08a - 9/10/2001 - David Gibson
* o Inserted some missing acknowledgements/info into the Changelog.
- * o Fixed some bugs in the normalisation of signel level reporting.
+ * o Fixed some bugs in the normalization of signal level reporting.
* o Fixed bad bug in WEP key handling on Intersil and Symbol firmware,
* which led to an instant crash on big-endian machines.
*
* o Bugfix in orinoco_stop() - it used to fail if hw_unavailable
* was set, which was usually true on PCMCIA hot removes.
* o Track LINKSTATUS messages, silently drop Tx packets before
- * we are connected (avoids cofusing the firmware), and only
+ * we are connected (avoids confusing the firmware), and only
* give LINKSTATUS printk()s if the status has changed.
*
* v0.13b -> v0.13c - 11 Mar 2003 - David Gibson
* o Disconnect wireless extensions from fundamental configuration.
* o (maybe) Software WEP support (patch from Stano Meduna).
* o (maybe) Use multiple Tx buffers - driver handling queue
- * rather than firmware. */
+ * rather than firmware.
+ */
/* Locking and synchronization:
*
* flag after taking the lock, and if it is set, give up on whatever
* they are doing and drop the lock again. The orinoco_lock()
* function handles this (it unlocks and returns -EBUSY if
- * hw_unavailable is non-zero). */
+ * hw_unavailable is non-zero).
+ */
+
+#define DRIVER_NAME "orinoco"
#include <linux/config.h>
/* Module information */
/********************************************************************/
-MODULE_AUTHOR("David Gibson <hermes@gibson.dropbear.id.au>");
+MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & David Gibson <hermes@gibson.dropbear.id.au>");
MODULE_DESCRIPTION("Driver for Lucent Orinoco, Prism II based and similar wireless cards");
-#ifdef MODULE_LICENSE
MODULE_LICENSE("Dual MPL/GPL");
-#endif
/* Level of debugging. Used in the macros in orinoco.h */
#ifdef ORINOCO_DEBUG
/* Compile time configuration and compatibility stuff */
/********************************************************************/
-/* Wireless extensions backwards compatibility */
-#ifndef SIOCIWFIRSTPRIV
-#define SIOCIWFIRSTPRIV SIOCDEVPRIVATE
-#endif /* SIOCIWFIRSTPRIV */
-
/* We do this this way to avoid ifdefs in the actual code */
#ifdef WIRELESS_SPY
#define SPY_NUMBER(priv) (priv->spy_number)
#define DUMMY_FID 0xFFFF
-#define RUP_EVEN(a) (((a) + 1) & (~1))
-
/*#define MAX_MULTICAST(priv) (priv->firmware_type == FIRMWARE_TYPE_AGERE ? \
HERMES_MAX_MULTICAST : 0)*/
#define MAX_MULTICAST(priv) (HERMES_MAX_MULTICAST)
+#define ORINOCO_INTEN (HERMES_EV_RX | HERMES_EV_ALLOC \
+ | HERMES_EV_TX | HERMES_EV_TXEXC \
+ | HERMES_EV_WTERR | HERMES_EV_INFO \
+ | HERMES_EV_INFDROP )
+
/********************************************************************/
/* Data tables */
/********************************************************************/
/* The frequency of each channel in MHz */
-const long channel_frequency[] = {
+static const long channel_frequency[] = {
2412, 2417, 2422, 2427, 2432, 2437, 2442,
2447, 2452, 2457, 2462, 2467, 2472, 2484
};
-#define NUM_CHANNELS ( sizeof(channel_frequency) / sizeof(channel_frequency[0]) )
+#define NUM_CHANNELS ARRAY_SIZE(channel_frequency)
-/* This tables gives the actual meanings of the bitrate IDs returned by the firmware. */
-struct {
+/* This tables gives the actual meanings of the bitrate IDs returned
+ * by the firmware. */
+static struct {
int bitrate; /* in 100s of kilobits */
int automatic;
u16 agere_txratectrl;
{55, 1, 7, 7},
{110, 0, 5, 8},
};
-#define BITRATE_TABLE_SIZE (sizeof(bitrate_table) / sizeof(bitrate_table[0]))
+#define BITRATE_TABLE_SIZE ARRAY_SIZE(bitrate_table)
/********************************************************************/
/* Data types */
#define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2)
+struct hermes_rx_descriptor {
+ u16 status;
+ u32 time;
+ u8 silence;
+ u8 signal;
+ u8 rate;
+ u8 rxflow;
+ u32 reserved;
+} __attribute__ ((packed));
+
/********************************************************************/
/* Function prototypes */
/********************************************************************/
-static void orinoco_stat_gather(struct net_device *dev,
- struct sk_buff *skb,
- struct hermes_rx_descriptor *desc);
-
-static struct net_device_stats *orinoco_get_stats(struct net_device *dev);
-static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev);
-
-/* Hardware control routines */
-
+static int orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
static int __orinoco_program_rids(struct net_device *dev);
-
-static int __orinoco_hw_set_bitrate(struct orinoco_private *priv);
-static int __orinoco_hw_setup_wep(struct orinoco_private *priv);
-static int orinoco_hw_get_bssid(struct orinoco_private *priv, char buf[ETH_ALEN]);
-static int orinoco_hw_get_essid(struct orinoco_private *priv, int *active,
- char buf[IW_ESSID_MAX_SIZE+1]);
-static long orinoco_hw_get_freq(struct orinoco_private *priv);
-static int orinoco_hw_get_bitratelist(struct orinoco_private *priv, int *numrates,
- s32 *rates, int max);
static void __orinoco_set_multicast_list(struct net_device *dev);
-
-/* Interrupt handling routines */
-static void __orinoco_ev_tick(struct net_device *dev, hermes_t *hw);
-static void __orinoco_ev_wterr(struct net_device *dev, hermes_t *hw);
-static void __orinoco_ev_infdrop(struct net_device *dev, hermes_t *hw);
-static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw);
-static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw);
-static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw);
-static void __orinoco_ev_tx(struct net_device *dev, hermes_t *hw);
-static void __orinoco_ev_alloc(struct net_device *dev, hermes_t *hw);
-
-/* ioctl() routines */
static int orinoco_debug_dump_recs(struct net_device *dev);
/********************************************************************/
-/* Function prototypes */
+/* Internal helper functions */
/********************************************************************/
-int __orinoco_up(struct net_device *dev)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- struct hermes *hw = &priv->hw;
- int err;
-
- err = __orinoco_program_rids(dev);
- if (err) {
- printk(KERN_ERR "%s: Error %d configuring card\n",
- dev->name, err);
- return err;
- }
-
- /* Fire things up again */
- hermes_set_irqmask(hw, ORINOCO_INTEN);
- err = hermes_enable_port(hw, 0);
- if (err) {
- printk(KERN_ERR "%s: Error %d enabling MAC port\n",
- dev->name, err);
- return err;
- }
-
- netif_start_queue(dev);
-
- return 0;
-}
-
-int __orinoco_down(struct net_device *dev)
+static inline void set_port_type(struct orinoco_private *priv)
{
- struct orinoco_private *priv = netdev_priv(dev);
- struct hermes *hw = &priv->hw;
- int err;
-
- netif_stop_queue(dev);
-
- if (! priv->hw_unavailable) {
- if (! priv->broken_disableport) {
- err = hermes_disable_port(hw, 0);
- if (err) {
- /* Some firmwares (e.g. Intersil 1.3.x) seem
- * to have problems disabling the port, oh
- * well, too bad. */
- printk(KERN_WARNING "%s: Error %d disabling MAC port\n",
- dev->name, err);
- priv->broken_disableport = 1;
- }
+ switch (priv->iw_mode) {
+ case IW_MODE_INFRA:
+ priv->port_type = 1;
+ priv->createibss = 0;
+ break;
+ case IW_MODE_ADHOC:
+ if (priv->prefer_port3) {
+ priv->port_type = 3;
+ priv->createibss = 0;
+ } else {
+ priv->port_type = priv->ibss_port;
+ priv->createibss = 1;
}
- hermes_set_irqmask(hw, 0);
- hermes_write_regn(hw, EVACK, 0xffff);
+ break;
+ default:
+ printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n",
+ priv->ndev->name);
}
-
- /* firmware will have to reassociate */
- priv->last_linkstatus = 0xffff;
- priv->connected = 0;
-
- return 0;
}
-int orinoco_reinit_firmware(struct net_device *dev)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- struct hermes *hw = &priv->hw;
- int err;
-
- err = hermes_init(hw);
- if (err)
- return err;
-
- err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
- if (err == -EIO) {
- /* Try workaround for old Symbol firmware bug */
- printk(KERN_WARNING "%s: firmware ALLOC bug detected "
- "(old Symbol firmware?). Trying to work around... ",
- dev->name);
-
- priv->nicbuf_size = TX_NICBUF_SIZE_BUG;
- err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
- if (err)
- printk("failed!\n");
- else
- printk("ok.\n");
- }
-
- return err;
-}
+/********************************************************************/
+/* Device methods */
+/********************************************************************/
static int orinoco_open(struct net_device *dev)
{
return err;
}
-static int __orinoco_program_rids(struct net_device *dev)
+static struct net_device_stats *orinoco_get_stats(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+
+ return &priv->stats;
+}
+
+static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev)
{
struct orinoco_private *priv = netdev_priv(dev);
hermes_t *hw = &priv->hw;
- int err;
- struct hermes_idstring idbuf;
+ struct iw_statistics *wstats = &priv->wstats;
+ int err = 0;
+ unsigned long flags;
- /* Set the MAC address */
- err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
- HERMES_BYTES_TO_RECLEN(ETH_ALEN), dev->dev_addr);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting MAC address\n", dev->name, err);
- return err;
+ if (! netif_device_present(dev)) {
+ printk(KERN_WARNING "%s: get_wireless_stats() called while device not present\n",
+ dev->name);
+ return NULL; /* FIXME: Can we do better than this? */
}
- /* Set up the link mode */
- err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE, priv->port_type);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting port type\n", dev->name, err);
- return err;
- }
- /* Set the channel/frequency */
- if (priv->channel == 0) {
- printk(KERN_DEBUG "%s: Channel is 0 in __orinoco_program_rids()\n", dev->name);
- if (priv->createibss)
- priv->channel = 10;
- }
- err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFOWNCHANNEL, priv->channel);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting channel\n", dev->name, err);
- return err;
- }
+ err = orinoco_lock(priv, &flags);
+ if (err)
+ return NULL; /* FIXME: Erg, we've been signalled, how
+ * do we propagate this back up? */
- if (priv->has_ibss) {
- err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFCREATEIBSS,
- priv->createibss);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n", dev->name, err);
- return err;
+ if (priv->iw_mode == IW_MODE_ADHOC) {
+ memset(&wstats->qual, 0, sizeof(wstats->qual));
+ /* If a spy address is defined, we report stats of the
+ * first spy address - Jean II */
+ if (SPY_NUMBER(priv)) {
+ wstats->qual.qual = priv->spy_stat[0].qual;
+ wstats->qual.level = priv->spy_stat[0].level;
+ wstats->qual.noise = priv->spy_stat[0].noise;
+ wstats->qual.updated = priv->spy_stat[0].updated;
}
+ } else {
+ struct {
+ u16 qual, signal, noise;
+ } __attribute__ ((packed)) cq;
- if ((strlen(priv->desired_essid) == 0) && (priv->createibss)
- && (!priv->has_ibss_any)) {
- printk(KERN_WARNING "%s: This firmware requires an \
-ESSID in IBSS-Ad-Hoc mode.\n", dev->name);
- /* With wvlan_cs, in this case, we would crash.
- * hopefully, this driver will behave better...
- * Jean II */
- }
+ err = HERMES_READ_RECORD(hw, USER_BAP,
+ HERMES_RID_COMMSQUALITY, &cq);
+
+ wstats->qual.qual = (int)le16_to_cpu(cq.qual);
+ wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95;
+ wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95;
+ wstats->qual.updated = 7;
}
- /* Set the desired ESSID */
- idbuf.len = cpu_to_le16(strlen(priv->desired_essid));
- memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val));
- /* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */
- err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID,
- HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
- &idbuf);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting OWNSSID\n", dev->name, err);
- return err;
- }
- err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID,
- HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
- &idbuf);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n", dev->name, err);
- return err;
- }
+ /* We can't really wait for the tallies inquiry command to
+ * complete, so we just use the previous results and trigger
+ * a new tallies inquiry command for next time - Jean II */
+ /* FIXME: We're in user context (I think?), so we should just
+ wait for the tallies to come through */
+ err = hermes_inquire(hw, HERMES_INQ_TALLIES);
+
+ orinoco_unlock(priv, &flags);
- /* Set the station name */
- idbuf.len = cpu_to_le16(strlen(priv->nick));
- memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val));
- err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
- HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2),
- &idbuf);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting nickname\n", dev->name, err);
- return err;
- }
+ if (err)
+ return NULL;
+
+ return wstats;
+}
- /* Set AP density */
- if (priv->has_sensitivity) {
- err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFSYSTEMSCALE,
- priv->ap_density);
- if (err) {
- printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE. "
- "Disabling sensitivity control\n", dev->name, err);
+static void orinoco_set_multicast_list(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ unsigned long flags;
- priv->has_sensitivity = 0;
- }
+ if (orinoco_lock(priv, &flags) != 0) {
+ printk(KERN_DEBUG "%s: orinoco_set_multicast_list() "
+ "called when hw_unavailable\n", dev->name);
+ return;
}
- /* Set RTS threshold */
- err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, priv->rts_thresh);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting RTS threshold\n", dev->name, err);
- return err;
- }
+ __orinoco_set_multicast_list(dev);
+ orinoco_unlock(priv, &flags);
+}
- /* Set fragmentation threshold or MWO robustness */
- if (priv->has_mwo)
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFMWOROBUST_AGERE,
- priv->mwo_robust);
- else
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
- priv->frag_thresh);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting framentation\n", dev->name, err);
- return err;
- }
-
- /* Set bitrate */
- err = __orinoco_hw_set_bitrate(priv);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting bitrate\n", dev->name, err);
- return err;
- }
-
- /* Set power management */
- if (priv->has_pm) {
- err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPMENABLED,
- priv->pm_on);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting up PM\n",
- dev->name, err);
- return err;
- }
-
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFMULTICASTRECEIVE,
- priv->pm_mcast);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting up PM\n",
- dev->name, err);
- return err;
- }
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFMAXSLEEPDURATION,
- priv->pm_period);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting up PM\n",
- dev->name, err);
- return err;
- }
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFPMHOLDOVERDURATION,
- priv->pm_timeout);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting up PM\n",
- dev->name, err);
- return err;
- }
- }
+static int orinoco_change_mtu(struct net_device *dev, int new_mtu)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
- /* Set preamble - only for Symbol so far... */
- if (priv->has_preamble) {
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFPREAMBLE_SYMBOL,
- priv->preamble);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting preamble\n",
- dev->name, err);
- return err;
- }
- }
+ if ( (new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU) )
+ return -EINVAL;
- /* Set up encryption */
- if (priv->has_wep) {
- err = __orinoco_hw_setup_wep(priv);
- if (err) {
- printk(KERN_ERR "%s: Error %d activating WEP\n",
- dev->name, err);
- return err;
- }
- }
+ if ( (new_mtu + ENCAPS_OVERHEAD + IEEE802_11_HLEN) >
+ (priv->nicbuf_size - ETH_HLEN) )
+ return -EINVAL;
- /* Set promiscuity / multicast*/
- priv->promiscuous = 0;
- priv->mc_count = 0;
- __orinoco_set_multicast_list(dev); /* FIXME: what about the xmit_lock */
+ dev->mtu = new_mtu;
return 0;
}
-/* xyzzy */
-static int orinoco_reconfigure(struct net_device *dev)
+/********************************************************************/
+/* Tx path */
+/********************************************************************/
+
+static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct orinoco_private *priv = netdev_priv(dev);
- struct hermes *hw = &priv->hw;
- unsigned long flags;
+ struct net_device_stats *stats = &priv->stats;
+ hermes_t *hw = &priv->hw;
int err = 0;
+ u16 txfid = priv->txfid;
+ char *p;
+ struct ethhdr *eh;
+ int len, data_len, data_off;
+ struct hermes_tx_descriptor desc;
+ unsigned long flags;
- if (priv->broken_disableport) {
- schedule_work(&priv->reset_work);
- return 0;
- }
-
- err = orinoco_lock(priv, &flags);
- if (err)
- return err;
+ TRACE_ENTER(dev->name);
-
- err = hermes_disable_port(hw, 0);
- if (err) {
- printk(KERN_WARNING "%s: Unable to disable port while reconfiguring card\n",
+ if (! netif_running(dev)) {
+ printk(KERN_ERR "%s: Tx on stopped device!\n",
dev->name);
- priv->broken_disableport = 1;
- goto out;
+ TRACE_EXIT(dev->name);
+ return 1;
}
-
- err = __orinoco_program_rids(dev);
- if (err) {
- printk(KERN_WARNING "%s: Unable to reconfigure card\n",
+
+ if (netif_queue_stopped(dev)) {
+ printk(KERN_DEBUG "%s: Tx while transmitter busy!\n",
dev->name);
- goto out;
+ TRACE_EXIT(dev->name);
+ return 1;
}
-
- err = hermes_enable_port(hw, 0);
- if (err) {
- printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n",
+
+ if (orinoco_lock(priv, &flags) != 0) {
+ printk(KERN_ERR "%s: orinoco_xmit() called while hw_unavailable\n",
dev->name);
- goto out;
+ TRACE_EXIT(dev->name);
+ return 1;
}
- out:
- if (err) {
- printk(KERN_WARNING "%s: Resetting instead...\n", dev->name);
- schedule_work(&priv->reset_work);
- err = 0;
+ if (! priv->connected) {
+ /* Oops, the firmware hasn't established a connection,
+ silently drop the packet (this seems to be the
+ safest approach). */
+ stats->tx_errors++;
+ orinoco_unlock(priv, &flags);
+ dev_kfree_skb(skb);
+ TRACE_EXIT(dev->name);
+ return 0;
}
- orinoco_unlock(priv, &flags);
- return err;
-
-}
-
-/* This must be called from user context, without locks held - use
- * schedule_work() */
-static void orinoco_reset(struct net_device *dev)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- struct hermes *hw = &priv->hw;
- int err;
- unsigned long flags;
+ /* Length of the packet body */
+ /* FIXME: what if the skb is smaller than this? */
+ len = max_t(int,skb->len - ETH_HLEN, ETH_ZLEN - ETH_HLEN);
- err = orinoco_lock(priv, &flags);
- if (err)
- /* When the hardware becomes available again, whatever
- * detects that is responsible for re-initializing
- * it. So no need for anything further*/
- return;
+ eh = (struct ethhdr *)skb->data;
- netif_stop_queue(dev);
+ memset(&desc, 0, sizeof(desc));
+ desc.tx_control = cpu_to_le16(HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX);
+ err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), txfid, 0);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d writing Tx descriptor to BAP\n",
+ dev->name, err);
+ stats->tx_errors++;
+ goto fail;
+ }
- /* Shut off interrupts. Depending on what state the hardware
- * is in, this might not work, but we'll try anyway */
- hermes_set_irqmask(hw, 0);
- hermes_write_regn(hw, EVACK, 0xffff);
+ /* Clear the 802.11 header and data length fields - some
+ * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused
+ * if this isn't done. */
+ hermes_clear_words(hw, HERMES_DATA0,
+ HERMES_802_3_OFFSET - HERMES_802_11_OFFSET);
- priv->hw_unavailable++;
- priv->last_linkstatus = 0xffff; /* firmware will have to reassociate */
- priv->connected = 0;
+ /* Encapsulate Ethernet-II frames */
+ if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */
+ struct header_struct hdr;
+ data_len = len;
+ data_off = HERMES_802_3_OFFSET + sizeof(hdr);
+ p = skb->data + ETH_HLEN;
- orinoco_unlock(priv, &flags);
+ /* 802.3 header */
+ memcpy(hdr.dest, eh->h_dest, ETH_ALEN);
+ memcpy(hdr.src, eh->h_source, ETH_ALEN);
+ hdr.len = htons(data_len + ENCAPS_OVERHEAD);
+
+ /* 802.2 header */
+ memcpy(&hdr.dsap, &encaps_hdr, sizeof(encaps_hdr));
+
+ hdr.ethertype = eh->h_proto;
+ err = hermes_bap_pwrite(hw, USER_BAP, &hdr, sizeof(hdr),
+ txfid, HERMES_802_3_OFFSET);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d writing packet header to BAP\n",
+ dev->name, err);
+ stats->tx_errors++;
+ goto fail;
+ }
+ } else { /* IEEE 802.3 frame */
+ data_len = len + ETH_HLEN;
+ data_off = HERMES_802_3_OFFSET;
+ p = skb->data;
+ }
- if (priv->hard_reset)
- err = (*priv->hard_reset)(priv);
+ /* Round up for odd length packets */
+ err = hermes_bap_pwrite(hw, USER_BAP, p, ALIGN(data_len, 2),
+ txfid, data_off);
if (err) {
- printk(KERN_ERR "%s: orinoco_reset: Error %d performing hard reset\n",
+ printk(KERN_ERR "%s: Error %d writing packet to BAP\n",
dev->name, err);
- /* FIXME: shutdown of some sort */
- return;
+ stats->tx_errors++;
+ goto fail;
}
- err = orinoco_reinit_firmware(dev);
+ /* Finally, we actually initiate the send */
+ netif_stop_queue(dev);
+
+ err = hermes_docmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL,
+ txfid, NULL);
if (err) {
- printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n",
+ netif_start_queue(dev);
+ printk(KERN_ERR "%s: Error %d transmitting packet\n",
dev->name, err);
- return;
+ stats->tx_errors++;
+ goto fail;
}
- spin_lock_irq(&priv->lock); /* This has to be called from user context */
+ dev->trans_start = jiffies;
+ stats->tx_bytes += data_off + data_len;
- priv->hw_unavailable--;
+ orinoco_unlock(priv, &flags);
- /* priv->open or priv->hw_unavailable might have changed while
- * we dropped the lock */
- if (priv->open && (! priv->hw_unavailable)) {
- err = __orinoco_up(dev);
- if (err) {
- printk(KERN_ERR "%s: orinoco_reset: Error %d reenabling card\n",
- dev->name, err);
- } else
- dev->trans_start = jiffies;
- }
+ dev_kfree_skb(skb);
- spin_unlock_irq(&priv->lock);
+ TRACE_EXIT(dev->name);
- return;
-}
+ return 0;
+ fail:
+ TRACE_EXIT(dev->name);
-/********************************************************************/
-/* Internal helper functions */
-/********************************************************************/
-
-static inline void
-set_port_type(struct orinoco_private *priv)
-{
- switch (priv->iw_mode) {
- case IW_MODE_INFRA:
- priv->port_type = 1;
- priv->createibss = 0;
- break;
- case IW_MODE_ADHOC:
- if (priv->prefer_port3) {
- priv->port_type = 3;
- priv->createibss = 0;
- } else {
- priv->port_type = priv->ibss_port;
- priv->createibss = 1;
- }
- break;
- default:
- printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n",
- priv->ndev->name);
- }
-}
-
-/* Does the frame have a SNAP header indicating it should be
- * de-encapsulated to Ethernet-II? */
-static inline int
-is_ethersnap(struct header_struct *hdr)
-{
- /* We de-encapsulate all packets which, a) have SNAP headers
- * (i.e. SSAP=DSAP=0xaa and CTRL=0x3 in the 802.2 LLC header
- * and where b) the OUI of the SNAP header is 00:00:00 or
- * 00:00:f8 - we need both because different APs appear to use
- * different OUIs for some reason */
- return (memcmp(&hdr->dsap, &encaps_hdr, 5) == 0)
- && ( (hdr->oui[2] == 0x00) || (hdr->oui[2] == 0xf8) );
+ orinoco_unlock(priv, &flags);
+ return err;
}
-static void
-orinoco_set_multicast_list(struct net_device *dev)
+static void __orinoco_ev_alloc(struct net_device *dev, hermes_t *hw)
{
struct orinoco_private *priv = netdev_priv(dev);
- unsigned long flags;
+ u16 fid = hermes_read_regn(hw, ALLOCFID);
- if (orinoco_lock(priv, &flags) != 0) {
- printk(KERN_DEBUG "%s: orinoco_set_multicast_list() "
- "called when hw_unavailable\n", dev->name);
+ if (fid != priv->txfid) {
+ if (fid != DUMMY_FID)
+ printk(KERN_WARNING "%s: Allocate event on unexpected fid (%04X)\n",
+ dev->name, fid);
return;
+ } else {
+ netif_wake_queue(dev);
}
- __orinoco_set_multicast_list(dev);
- orinoco_unlock(priv, &flags);
+ hermes_write_regn(hw, ALLOCFID, DUMMY_FID);
}
-/********************************************************************/
-/* Hardware control functions */
-/********************************************************************/
+static void __orinoco_ev_tx(struct net_device *dev, hermes_t *hw)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &priv->stats;
+ stats->tx_packets++;
-static int __orinoco_hw_set_bitrate(struct orinoco_private *priv)
+ hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
+}
+
+static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw)
{
- hermes_t *hw = &priv->hw;
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &priv->stats;
+ u16 fid = hermes_read_regn(hw, TXCOMPLFID);
+ struct hermes_tx_descriptor desc;
int err = 0;
- if (priv->bitratemode >= BITRATE_TABLE_SIZE) {
- printk(KERN_ERR "%s: BUG: Invalid bitrate mode %d\n",
- priv->ndev->name, priv->bitratemode);
- return -EINVAL;
- }
+ if (fid == DUMMY_FID)
+ return; /* Nothing's really happened */
- switch (priv->firmware_type) {
- case FIRMWARE_TYPE_AGERE:
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFTXRATECONTROL,
- bitrate_table[priv->bitratemode].agere_txratectrl);
- break;
- case FIRMWARE_TYPE_INTERSIL:
- case FIRMWARE_TYPE_SYMBOL:
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFTXRATECONTROL,
- bitrate_table[priv->bitratemode].intersil_txratectrl);
- break;
- default:
- BUG();
+ err = hermes_bap_pread(hw, IRQ_BAP, &desc, sizeof(desc), fid, 0);
+ if (err) {
+ printk(KERN_WARNING "%s: Unable to read descriptor on Tx error "
+ "(FID=%04X error %d)\n",
+ dev->name, fid, err);
+ } else {
+ DEBUG(1, "%s: Tx error, status %d\n",
+ dev->name, le16_to_cpu(desc.status));
}
+
+ stats->tx_errors++;
- return err;
+ hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
}
-
-static int __orinoco_hw_setup_wep(struct orinoco_private *priv)
+static void orinoco_tx_timeout(struct net_device *dev)
{
- hermes_t *hw = &priv->hw;
- int err = 0;
- int master_wep_flag;
- int auth_flag;
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &priv->stats;
+ struct hermes *hw = &priv->hw;
- switch (priv->firmware_type) {
- case FIRMWARE_TYPE_AGERE: /* Agere style WEP */
- if (priv->wep_on) {
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFTXKEY_AGERE,
- priv->tx_key);
- if (err)
- return err;
-
- err = HERMES_WRITE_RECORD(hw, USER_BAP,
- HERMES_RID_CNFWEPKEYS_AGERE,
- &priv->keys);
- if (err)
- return err;
- }
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFWEPENABLED_AGERE,
- priv->wep_on);
- if (err)
- return err;
- break;
+ printk(KERN_WARNING "%s: Tx timeout! "
+ "ALLOCFID=%04x, TXCOMPLFID=%04x, EVSTAT=%04x\n",
+ dev->name, hermes_read_regn(hw, ALLOCFID),
+ hermes_read_regn(hw, TXCOMPLFID), hermes_read_regn(hw, EVSTAT));
- case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */
- case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */
- master_wep_flag = 0; /* Off */
- if (priv->wep_on) {
- int keylen;
- int i;
+ stats->tx_errors++;
- /* Fudge around firmware weirdness */
- keylen = le16_to_cpu(priv->keys[priv->tx_key].len);
-
- /* Write all 4 keys */
- for(i = 0; i < ORINOCO_MAX_KEYS; i++) {
-/* int keylen = le16_to_cpu(priv->keys[i].len); */
-
- if (keylen > LARGE_KEY_SIZE) {
- printk(KERN_ERR "%s: BUG: Key %d has oversize length %d.\n",
- priv->ndev->name, i, keylen);
- return -E2BIG;
- }
+ schedule_work(&priv->reset_work);
+}
- err = hermes_write_ltv(hw, USER_BAP,
- HERMES_RID_CNFDEFAULTKEY0 + i,
- HERMES_BYTES_TO_RECLEN(keylen),
- priv->keys[i].data);
- if (err)
- return err;
- }
+/********************************************************************/
+/* Rx path (data frames) */
+/********************************************************************/
- /* Write the index of the key used in transmission */
- err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFWEPDEFAULTKEYID,
- priv->tx_key);
- if (err)
- return err;
-
- if (priv->wep_restrict) {
- auth_flag = 2;
- master_wep_flag = 3;
- } else {
- /* Authentication is where Intersil and Symbol
- * firmware differ... */
- auth_flag = 1;
- if (priv->firmware_type == FIRMWARE_TYPE_SYMBOL)
- master_wep_flag = 3; /* Symbol */
- else
- master_wep_flag = 1; /* Intersil */
- }
+/* Does the frame have a SNAP header indicating it should be
+ * de-encapsulated to Ethernet-II? */
+static inline int is_ethersnap(struct header_struct *hdr)
+{
+ /* We de-encapsulate all packets which, a) have SNAP headers
+ * (i.e. SSAP=DSAP=0xaa and CTRL=0x3 in the 802.2 LLC header
+ * and where b) the OUI of the SNAP header is 00:00:00 or
+ * 00:00:f8 - we need both because different APs appear to use
+ * different OUIs for some reason */
+ return (memcmp(&hdr->dsap, &encaps_hdr, 5) == 0)
+ && ( (hdr->oui[2] == 0x00) || (hdr->oui[2] == 0xf8) );
+}
+static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac,
+ int level, int noise)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int i;
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFAUTHENTICATION, auth_flag);
- if (err)
- return err;
+ /* Gather wireless spy statistics: for each packet, compare the
+ * source address with out list, and if match, get the stats... */
+ for (i = 0; i < priv->spy_number; i++)
+ if (!memcmp(mac, priv->spy_address[i], ETH_ALEN)) {
+ priv->spy_stat[i].level = level - 0x95;
+ priv->spy_stat[i].noise = noise - 0x95;
+ priv->spy_stat[i].qual = (level > noise) ? (level - noise) : 0;
+ priv->spy_stat[i].updated = 7;
}
-
- /* Master WEP setting : on/off */
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFWEPFLAGS_INTERSIL,
- master_wep_flag);
- if (err)
- return err;
+}
- break;
+static void orinoco_stat_gather(struct net_device *dev,
+ struct sk_buff *skb,
+ struct hermes_rx_descriptor *desc)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
- default:
- if (priv->wep_on) {
- printk(KERN_ERR "%s: WEP enabled, although not supported!\n",
- priv->ndev->name);
- return -EINVAL;
- }
+ /* Using spy support with lots of Rx packets, like in an
+ * infrastructure (AP), will really slow down everything, because
+ * the MAC address must be compared to each entry of the spy list.
+ * If the user really asks for it (set some address in the
+ * spy list), we do it, but he will pay the price.
+ * Note that to get here, you need both WIRELESS_SPY
+ * compiled in AND some addresses in the list !!!
+ */
+ /* Note : gcc will optimise the whole section away if
+ * WIRELESS_SPY is not defined... - Jean II */
+ if (SPY_NUMBER(priv)) {
+ orinoco_spy_gather(dev, skb->mac.raw + ETH_ALEN,
+ desc->signal, desc->silence);
}
-
- return 0;
}
-static int orinoco_hw_get_bssid(struct orinoco_private *priv,
- char buf[ETH_ALEN])
+static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw)
{
- hermes_t *hw = &priv->hw;
- int err = 0;
- unsigned long flags;
-
- err = orinoco_lock(priv, &flags);
- if (err)
- return err;
-
- err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID,
- ETH_ALEN, NULL, buf);
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &priv->stats;
+ struct iw_statistics *wstats = &priv->wstats;
+ struct sk_buff *skb = NULL;
+ u16 rxfid, status;
+ int length, data_len, data_off;
+ char *p;
+ struct hermes_rx_descriptor desc;
+ struct header_struct hdr;
+ struct ethhdr *eh;
+ int err;
- orinoco_unlock(priv, &flags);
+ rxfid = hermes_read_regn(hw, RXFID);
- return err;
-}
+ err = hermes_bap_pread(hw, IRQ_BAP, &desc, sizeof(desc),
+ rxfid, 0);
+ if (err) {
+ printk(KERN_ERR "%s: error %d reading Rx descriptor. "
+ "Frame dropped.\n", dev->name, err);
+ stats->rx_errors++;
+ goto drop;
+ }
-static int orinoco_hw_get_essid(struct orinoco_private *priv, int *active,
- char buf[IW_ESSID_MAX_SIZE+1])
-{
- hermes_t *hw = &priv->hw;
- int err = 0;
- struct hermes_idstring essidbuf;
- char *p = (char *)(&essidbuf.val);
- int len;
- unsigned long flags;
+ status = le16_to_cpu(desc.status);
- err = orinoco_lock(priv, &flags);
- if (err)
- return err;
+ if (status & HERMES_RXSTAT_ERR) {
+ if (status & HERMES_RXSTAT_UNDECRYPTABLE) {
+ wstats->discard.code++;
+ DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n",
+ dev->name);
+ } else {
+ stats->rx_crc_errors++;
+ DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n", dev->name);
+ }
+ stats->rx_errors++;
+ goto drop;
+ }
- if (strlen(priv->desired_essid) > 0) {
- /* We read the desired SSID from the hardware rather
- than from priv->desired_essid, just in case the
- firmware is allowed to change it on us. I'm not
- sure about this */
- /* My guess is that the OWNSSID should always be whatever
- * we set to the card, whereas CURRENT_SSID is the one that
- * may change... - Jean II */
- u16 rid;
+ /* For now we ignore the 802.11 header completely, assuming
+ that the card's firmware has handled anything vital */
- *active = 1;
+ err = hermes_bap_pread(hw, IRQ_BAP, &hdr, sizeof(hdr),
+ rxfid, HERMES_802_3_OFFSET);
+ if (err) {
+ printk(KERN_ERR "%s: error %d reading frame header. "
+ "Frame dropped.\n", dev->name, err);
+ stats->rx_errors++;
+ goto drop;
+ }
- rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID :
- HERMES_RID_CNFDESIREDSSID;
-
- err = hermes_read_ltv(hw, USER_BAP, rid, sizeof(essidbuf),
- NULL, &essidbuf);
- if (err)
- goto fail_unlock;
- } else {
- *active = 0;
+ length = ntohs(hdr.len);
+
+ /* Sanity checks */
+ if (length < 3) { /* No for even an 802.2 LLC header */
+ /* At least on Symbol firmware with PCF we get quite a
+ lot of these legitimately - Poll frames with no
+ data. */
+ stats->rx_dropped++;
+ goto drop;
+ }
+ if (length > IEEE802_11_DATA_LEN) {
+ printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n",
+ dev->name, length);
+ stats->rx_length_errors++;
+ stats->rx_errors++;
+ goto drop;
+ }
- err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID,
- sizeof(essidbuf), NULL, &essidbuf);
- if (err)
- goto fail_unlock;
+ /* We need space for the packet data itself, plus an ethernet
+ header, plus 2 bytes so we can align the IP header on a
+ 32bit boundary, plus 1 byte so we can read in odd length
+ packets from the card, which has an IO granularity of 16
+ bits */
+ skb = dev_alloc_skb(length+ETH_HLEN+2+1);
+ if (!skb) {
+ printk(KERN_WARNING "%s: Can't allocate skb for Rx\n",
+ dev->name);
+ goto drop;
}
- len = le16_to_cpu(essidbuf.len);
+ skb_reserve(skb, 2); /* This way the IP header is aligned */
- memset(buf, 0, IW_ESSID_MAX_SIZE+1);
- memcpy(buf, p, len);
- buf[len] = '\0';
+ /* Handle decapsulation
+ * In most cases, the firmware tell us about SNAP frames.
+ * For some reason, the SNAP frames sent by LinkSys APs
+ * are not properly recognised by most firmwares.
+ * So, check ourselves */
+ if (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) ||
+ ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) ||
+ is_ethersnap(&hdr)) {
+ /* These indicate a SNAP within 802.2 LLC within
+ 802.11 frame which we'll need to de-encapsulate to
+ the original EthernetII frame. */
- fail_unlock:
- orinoco_unlock(priv, &flags);
+ if (length < ENCAPS_OVERHEAD) { /* No room for full LLC+SNAP */
+ stats->rx_length_errors++;
+ goto drop;
+ }
- return err;
-}
+ /* Remove SNAP header, reconstruct EthernetII frame */
+ data_len = length - ENCAPS_OVERHEAD;
+ data_off = HERMES_802_3_OFFSET + sizeof(hdr);
-static long orinoco_hw_get_freq(struct orinoco_private *priv)
-{
-
- hermes_t *hw = &priv->hw;
- int err = 0;
- u16 channel;
- long freq = 0;
- unsigned long flags;
+ eh = (struct ethhdr *)skb_put(skb, ETH_HLEN);
- err = orinoco_lock(priv, &flags);
- if (err)
- return err;
-
- err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CURRENTCHANNEL, &channel);
- if (err)
- goto out;
+ memcpy(eh, &hdr, 2 * ETH_ALEN);
+ eh->h_proto = hdr.ethertype;
+ } else {
+ /* All other cases indicate a genuine 802.3 frame. No
+ decapsulation needed. We just throw the whole
+ thing in, and hope the protocol layer can deal with
+ it as 802.3 */
+ data_len = length;
+ data_off = HERMES_802_3_OFFSET;
+ /* FIXME: we re-read from the card data we already read here */
+ }
- /* Intersil firmware 1.3.5 returns 0 when the interface is down */
- if (channel == 0) {
- err = -EBUSY;
- goto out;
+ p = skb_put(skb, data_len);
+ err = hermes_bap_pread(hw, IRQ_BAP, p, ALIGN(data_len, 2),
+ rxfid, data_off);
+ if (err) {
+ printk(KERN_ERR "%s: error %d reading frame. "
+ "Frame dropped.\n", dev->name, err);
+ stats->rx_errors++;
+ goto drop;
}
- if ( (channel < 1) || (channel > NUM_CHANNELS) ) {
- printk(KERN_WARNING "%s: Channel out of range (%d)!\n",
- priv->ndev->name, channel);
- err = -EBUSY;
- goto out;
+ dev->last_rx = jiffies;
+ skb->dev = dev;
+ skb->protocol = eth_type_trans(skb, dev);
+ skb->ip_summed = CHECKSUM_NONE;
+
+ /* Process the wireless stats if needed */
+ orinoco_stat_gather(dev, skb, &desc);
- }
- freq = channel_frequency[channel-1] * 100000;
+ /* Pass the packet to the networking stack */
+ netif_rx(skb);
+ stats->rx_packets++;
+ stats->rx_bytes += length;
- out:
- orinoco_unlock(priv, &flags);
+ return;
- if (err > 0)
- err = -EBUSY;
- return err ? err : freq;
+ drop:
+ stats->rx_dropped++;
+
+ if (skb)
+ dev_kfree_skb_irq(skb);
+ return;
}
-static int orinoco_hw_get_bitratelist(struct orinoco_private *priv,
- int *numrates, s32 *rates, int max)
-{
- hermes_t *hw = &priv->hw;
- struct hermes_idstring list;
- unsigned char *p = (unsigned char *)&list.val;
- int err = 0;
- int num;
- int i;
- unsigned long flags;
+/********************************************************************/
+/* Rx path (info frames) */
+/********************************************************************/
- err = orinoco_lock(priv, &flags);
- if (err)
- return err;
+static void print_linkstatus(struct net_device *dev, u16 status)
+{
+ char * s;
- err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES,
- sizeof(list), NULL, &list);
- orinoco_unlock(priv, &flags);
+ if (suppress_linkstatus)
+ return;
- if (err)
- return err;
+ switch (status) {
+ case HERMES_LINKSTATUS_NOT_CONNECTED:
+ s = "Not Connected";
+ break;
+ case HERMES_LINKSTATUS_CONNECTED:
+ s = "Connected";
+ break;
+ case HERMES_LINKSTATUS_DISCONNECTED:
+ s = "Disconnected";
+ break;
+ case HERMES_LINKSTATUS_AP_CHANGE:
+ s = "AP Changed";
+ break;
+ case HERMES_LINKSTATUS_AP_OUT_OF_RANGE:
+ s = "AP Out of Range";
+ break;
+ case HERMES_LINKSTATUS_AP_IN_RANGE:
+ s = "AP In Range";
+ break;
+ case HERMES_LINKSTATUS_ASSOC_FAILED:
+ s = "Association Failed";
+ break;
+ default:
+ s = "UNKNOWN";
+ }
- num = le16_to_cpu(list.len);
- *numrates = num;
- num = min(num, max);
-
- for (i = 0; i < num; i++) {
- rates[i] = (p[i] & 0x7f) * 500000; /* convert to bps */
- }
-
- return 0;
-}
-
-#if 0
-static void show_rx_frame(struct orinoco_rxframe_hdr *frame)
-{
- printk(KERN_DEBUG "RX descriptor:\n");
- printk(KERN_DEBUG " status = 0x%04x\n", frame->desc.status);
- printk(KERN_DEBUG " time = 0x%08x\n", frame->desc.time);
- printk(KERN_DEBUG " silence = 0x%02x\n", frame->desc.silence);
- printk(KERN_DEBUG " signal = 0x%02x\n", frame->desc.signal);
- printk(KERN_DEBUG " rate = 0x%02x\n", frame->desc.rate);
- printk(KERN_DEBUG " rxflow = 0x%02x\n", frame->desc.rxflow);
- printk(KERN_DEBUG " reserved = 0x%08x\n", frame->desc.reserved);
-
- printk(KERN_DEBUG "IEEE 802.11 header:\n");
- printk(KERN_DEBUG " frame_ctl = 0x%04x\n",
- frame->p80211.frame_ctl);
- printk(KERN_DEBUG " duration_id = 0x%04x\n",
- frame->p80211.duration_id);
- printk(KERN_DEBUG " addr1 = %02x:%02x:%02x:%02x:%02x:%02x\n",
- frame->p80211.addr1[0], frame->p80211.addr1[1],
- frame->p80211.addr1[2], frame->p80211.addr1[3],
- frame->p80211.addr1[4], frame->p80211.addr1[5]);
- printk(KERN_DEBUG " addr2 = %02x:%02x:%02x:%02x:%02x:%02x\n",
- frame->p80211.addr2[0], frame->p80211.addr2[1],
- frame->p80211.addr2[2], frame->p80211.addr2[3],
- frame->p80211.addr2[4], frame->p80211.addr2[5]);
- printk(KERN_DEBUG " addr3 = %02x:%02x:%02x:%02x:%02x:%02x\n",
- frame->p80211.addr3[0], frame->p80211.addr3[1],
- frame->p80211.addr3[2], frame->p80211.addr3[3],
- frame->p80211.addr3[4], frame->p80211.addr3[5]);
- printk(KERN_DEBUG " seq_ctl = 0x%04x\n",
- frame->p80211.seq_ctl);
- printk(KERN_DEBUG " addr4 = %02x:%02x:%02x:%02x:%02x:%02x\n",
- frame->p80211.addr4[0], frame->p80211.addr4[1],
- frame->p80211.addr4[2], frame->p80211.addr4[3],
- frame->p80211.addr4[4], frame->p80211.addr4[5]);
- printk(KERN_DEBUG " data_len = 0x%04x\n",
- frame->p80211.data_len);
-
- printk(KERN_DEBUG "IEEE 802.3 header:\n");
- printk(KERN_DEBUG " dest = %02x:%02x:%02x:%02x:%02x:%02x\n",
- frame->p8023.h_dest[0], frame->p8023.h_dest[1],
- frame->p8023.h_dest[2], frame->p8023.h_dest[3],
- frame->p8023.h_dest[4], frame->p8023.h_dest[5]);
- printk(KERN_DEBUG " src = %02x:%02x:%02x:%02x:%02x:%02x\n",
- frame->p8023.h_source[0], frame->p8023.h_source[1],
- frame->p8023.h_source[2], frame->p8023.h_source[3],
- frame->p8023.h_source[4], frame->p8023.h_source[5]);
- printk(KERN_DEBUG " len = 0x%04x\n", frame->p8023.h_proto);
-
- printk(KERN_DEBUG "IEEE 802.2 LLC/SNAP header:\n");
- printk(KERN_DEBUG " DSAP = 0x%02x\n", frame->p8022.dsap);
- printk(KERN_DEBUG " SSAP = 0x%02x\n", frame->p8022.ssap);
- printk(KERN_DEBUG " ctrl = 0x%02x\n", frame->p8022.ctrl);
- printk(KERN_DEBUG " OUI = %02x:%02x:%02x\n",
- frame->p8022.oui[0], frame->p8022.oui[1], frame->p8022.oui[2]);
- printk(KERN_DEBUG " ethertype = 0x%04x\n", frame->ethertype);
-}
-#endif /* 0 */
-
-/*
- * Interrupt handler
- */
-irqreturn_t orinoco_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
- struct net_device *dev = (struct net_device *)dev_id;
- struct orinoco_private *priv = netdev_priv(dev);
- hermes_t *hw = &priv->hw;
- int count = MAX_IRQLOOPS_PER_IRQ;
- u16 evstat, events;
- /* These are used to detect a runaway interrupt situation */
- /* If we get more than MAX_IRQLOOPS_PER_JIFFY iterations in a jiffy,
- * we panic and shut down the hardware */
- static int last_irq_jiffy = 0; /* jiffies value the last time we were called */
- static int loops_this_jiffy = 0;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0) {
- /* If hw is unavailable - we don't know if the irq was
- * for us or not */
- return IRQ_HANDLED;
- }
-
- evstat = hermes_read_regn(hw, EVSTAT);
- events = evstat & hw->inten;
- if (! events) {
- orinoco_unlock(priv, &flags);
- return IRQ_NONE;
- }
-
- if (jiffies != last_irq_jiffy)
- loops_this_jiffy = 0;
- last_irq_jiffy = jiffies;
-
- while (events && count--) {
- if (++loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY) {
- printk(KERN_WARNING "%s: IRQ handler is looping too "
- "much! Resetting.\n", dev->name);
- /* Disable interrupts for now */
- hermes_set_irqmask(hw, 0);
- schedule_work(&priv->reset_work);
- break;
- }
-
- /* Check the card hasn't been removed */
- if (! hermes_present(hw)) {
- DEBUG(0, "orinoco_interrupt(): card removed\n");
- break;
- }
-
- if (events & HERMES_EV_TICK)
- __orinoco_ev_tick(dev, hw);
- if (events & HERMES_EV_WTERR)
- __orinoco_ev_wterr(dev, hw);
- if (events & HERMES_EV_INFDROP)
- __orinoco_ev_infdrop(dev, hw);
- if (events & HERMES_EV_INFO)
- __orinoco_ev_info(dev, hw);
- if (events & HERMES_EV_RX)
- __orinoco_ev_rx(dev, hw);
- if (events & HERMES_EV_TXEXC)
- __orinoco_ev_txexc(dev, hw);
- if (events & HERMES_EV_TX)
- __orinoco_ev_tx(dev, hw);
- if (events & HERMES_EV_ALLOC)
- __orinoco_ev_alloc(dev, hw);
-
- hermes_write_regn(hw, EVACK, events);
-
- evstat = hermes_read_regn(hw, EVSTAT);
- events = evstat & hw->inten;
- };
-
- orinoco_unlock(priv, &flags);
- return IRQ_HANDLED;
-}
-
-static void __orinoco_ev_tick(struct net_device *dev, hermes_t *hw)
-{
- printk(KERN_DEBUG "%s: TICK\n", dev->name);
-}
-
-static void __orinoco_ev_wterr(struct net_device *dev, hermes_t *hw)
-{
- /* This seems to happen a fair bit under load, but ignoring it
- seems to work fine...*/
- printk(KERN_DEBUG "%s: MAC controller error (WTERR). Ignoring.\n",
- dev->name);
-}
-
-static void __orinoco_ev_infdrop(struct net_device *dev, hermes_t *hw)
-{
- if (net_ratelimit())
- printk(KERN_WARNING "%s: Information frame lost.\n", dev->name);
-}
-
-static void print_linkstatus(struct net_device *dev, u16 status)
-{
- char * s;
-
- if (suppress_linkstatus)
- return;
-
- switch (status) {
- case HERMES_LINKSTATUS_NOT_CONNECTED:
- s = "Not Connected";
- break;
- case HERMES_LINKSTATUS_CONNECTED:
- s = "Connected";
- break;
- case HERMES_LINKSTATUS_DISCONNECTED:
- s = "Disconnected";
- break;
- case HERMES_LINKSTATUS_AP_CHANGE:
- s = "AP Changed";
- break;
- case HERMES_LINKSTATUS_AP_OUT_OF_RANGE:
- s = "AP Out of Range";
- break;
- case HERMES_LINKSTATUS_AP_IN_RANGE:
- s = "AP In Range";
- break;
- case HERMES_LINKSTATUS_ASSOC_FAILED:
- s = "Association Failed";
- break;
- default:
- s = "UNKNOWN";
- }
-
- printk(KERN_INFO "%s: New link status: %s (%04x)\n",
- dev->name, s, status);
-}
+ printk(KERN_INFO "%s: New link status: %s (%04x)\n",
+ dev->name, s, status);
+}
static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
{
le16_to_cpu(tallies.RxDiscards_WEPExcluded);
wstats->discard.misc +=
le16_to_cpu(tallies.TxDiscardsWrongSA);
-#if WIRELESS_EXT > 11
wstats->discard.fragment +=
le16_to_cpu(tallies.RxMsgInBadMsgFragments);
wstats->discard.retries +=
le16_to_cpu(tallies.TxRetryLimitExceeded);
/* wstats->miss.beacon - no match */
-#endif /* WIRELESS_EXT > 11 */
}
break;
case HERMES_INQ_LINKSTATUS: {
struct hermes_linkstatus linkstatus;
u16 newstatus;
-
+
if (len != sizeof(linkstatus)) {
printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n",
dev->name, len);
}
break;
default:
- printk(KERN_DEBUG "%s: Unknown information frame received (type %04x).\n",
- dev->name, type);
+ printk(KERN_DEBUG "%s: Unknown information frame received "
+ "(type %04x).\n", dev->name, type);
/* We don't actually do anything about it */
break;
}
}
-static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw)
+static void __orinoco_ev_infdrop(struct net_device *dev, hermes_t *hw)
+{
+ if (net_ratelimit())
+ printk(KERN_WARNING "%s: Information frame lost.\n", dev->name);
+}
+
+/********************************************************************/
+/* Internal hardware control routines */
+/********************************************************************/
+
+int __orinoco_up(struct net_device *dev)
{
struct orinoco_private *priv = netdev_priv(dev);
- struct net_device_stats *stats = &priv->stats;
- struct iw_statistics *wstats = &priv->wstats;
- struct sk_buff *skb = NULL;
- u16 rxfid, status;
- int length, data_len, data_off;
- char *p;
- struct hermes_rx_descriptor desc;
- struct header_struct hdr;
- struct ethhdr *eh;
+ struct hermes *hw = &priv->hw;
int err;
- rxfid = hermes_read_regn(hw, RXFID);
-
- err = hermes_bap_pread(hw, IRQ_BAP, &desc, sizeof(desc),
- rxfid, 0);
+ err = __orinoco_program_rids(dev);
if (err) {
- printk(KERN_ERR "%s: error %d reading Rx descriptor. "
- "Frame dropped.\n", dev->name, err);
- stats->rx_errors++;
- goto drop;
+ printk(KERN_ERR "%s: Error %d configuring card\n",
+ dev->name, err);
+ return err;
}
- status = le16_to_cpu(desc.status);
-
- if (status & HERMES_RXSTAT_ERR) {
- if (status & HERMES_RXSTAT_UNDECRYPTABLE) {
- wstats->discard.code++;
- DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n",
- dev->name);
- } else {
- stats->rx_crc_errors++;
- DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n", dev->name);
- }
- stats->rx_errors++;
- goto drop;
+ /* Fire things up again */
+ hermes_set_irqmask(hw, ORINOCO_INTEN);
+ err = hermes_enable_port(hw, 0);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d enabling MAC port\n",
+ dev->name, err);
+ return err;
}
- /* For now we ignore the 802.11 header completely, assuming
- that the card's firmware has handled anything vital */
+ netif_start_queue(dev);
- err = hermes_bap_pread(hw, IRQ_BAP, &hdr, sizeof(hdr),
- rxfid, HERMES_802_3_OFFSET);
+ return 0;
+}
+
+int __orinoco_down(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct hermes *hw = &priv->hw;
+ int err;
+
+ netif_stop_queue(dev);
+
+ if (! priv->hw_unavailable) {
+ if (! priv->broken_disableport) {
+ err = hermes_disable_port(hw, 0);
+ if (err) {
+ /* Some firmwares (e.g. Intersil 1.3.x) seem
+ * to have problems disabling the port, oh
+ * well, too bad. */
+ printk(KERN_WARNING "%s: Error %d disabling MAC port\n",
+ dev->name, err);
+ priv->broken_disableport = 1;
+ }
+ }
+ hermes_set_irqmask(hw, 0);
+ hermes_write_regn(hw, EVACK, 0xffff);
+ }
+
+ /* firmware will have to reassociate */
+ priv->last_linkstatus = 0xffff;
+ priv->connected = 0;
+
+ return 0;
+}
+
+int orinoco_reinit_firmware(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct hermes *hw = &priv->hw;
+ int err;
+
+ err = hermes_init(hw);
+ if (err)
+ return err;
+
+ err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
+ if (err == -EIO) {
+ /* Try workaround for old Symbol firmware bug */
+ printk(KERN_WARNING "%s: firmware ALLOC bug detected "
+ "(old Symbol firmware?). Trying to work around... ",
+ dev->name);
+
+ priv->nicbuf_size = TX_NICBUF_SIZE_BUG;
+ err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
+ if (err)
+ printk("failed!\n");
+ else
+ printk("ok.\n");
+ }
+
+ return err;
+}
+
+static int __orinoco_hw_set_bitrate(struct orinoco_private *priv)
+{
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+
+ if (priv->bitratemode >= BITRATE_TABLE_SIZE) {
+ printk(KERN_ERR "%s: BUG: Invalid bitrate mode %d\n",
+ priv->ndev->name, priv->bitratemode);
+ return -EINVAL;
+ }
+
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_AGERE:
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFTXRATECONTROL,
+ bitrate_table[priv->bitratemode].agere_txratectrl);
+ break;
+ case FIRMWARE_TYPE_INTERSIL:
+ case FIRMWARE_TYPE_SYMBOL:
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFTXRATECONTROL,
+ bitrate_table[priv->bitratemode].intersil_txratectrl);
+ break;
+ default:
+ BUG();
+ }
+
+ return err;
+}
+
+static int __orinoco_hw_setup_wep(struct orinoco_private *priv)
+{
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ int master_wep_flag;
+ int auth_flag;
+
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_AGERE: /* Agere style WEP */
+ if (priv->wep_on) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFTXKEY_AGERE,
+ priv->tx_key);
+ if (err)
+ return err;
+
+ err = HERMES_WRITE_RECORD(hw, USER_BAP,
+ HERMES_RID_CNFWEPKEYS_AGERE,
+ &priv->keys);
+ if (err)
+ return err;
+ }
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFWEPENABLED_AGERE,
+ priv->wep_on);
+ if (err)
+ return err;
+ break;
+
+ case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */
+ case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */
+ master_wep_flag = 0; /* Off */
+ if (priv->wep_on) {
+ int keylen;
+ int i;
+
+ /* Fudge around firmware weirdness */
+ keylen = le16_to_cpu(priv->keys[priv->tx_key].len);
+
+ /* Write all 4 keys */
+ for(i = 0; i < ORINOCO_MAX_KEYS; i++) {
+/* int keylen = le16_to_cpu(priv->keys[i].len); */
+
+ if (keylen > LARGE_KEY_SIZE) {
+ printk(KERN_ERR "%s: BUG: Key %d has oversize length %d.\n",
+ priv->ndev->name, i, keylen);
+ return -E2BIG;
+ }
+
+ err = hermes_write_ltv(hw, USER_BAP,
+ HERMES_RID_CNFDEFAULTKEY0 + i,
+ HERMES_BYTES_TO_RECLEN(keylen),
+ priv->keys[i].data);
+ if (err)
+ return err;
+ }
+
+ /* Write the index of the key used in transmission */
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFWEPDEFAULTKEYID,
+ priv->tx_key);
+ if (err)
+ return err;
+
+ if (priv->wep_restrict) {
+ auth_flag = 2;
+ master_wep_flag = 3;
+ } else {
+ /* Authentication is where Intersil and Symbol
+ * firmware differ... */
+ auth_flag = 1;
+ if (priv->firmware_type == FIRMWARE_TYPE_SYMBOL)
+ master_wep_flag = 3; /* Symbol */
+ else
+ master_wep_flag = 1; /* Intersil */
+ }
+
+
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFAUTHENTICATION,
+ auth_flag);
+ if (err)
+ return err;
+ }
+
+ /* Master WEP setting : on/off */
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFWEPFLAGS_INTERSIL,
+ master_wep_flag);
+ if (err)
+ return err;
+
+ break;
+
+ default:
+ if (priv->wep_on) {
+ printk(KERN_ERR "%s: WEP enabled, although not supported!\n",
+ priv->ndev->name);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static int __orinoco_program_rids(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int err;
+ struct hermes_idstring idbuf;
+
+ /* Set the MAC address */
+ err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
+ HERMES_BYTES_TO_RECLEN(ETH_ALEN), dev->dev_addr);
if (err) {
- printk(KERN_ERR "%s: error %d reading frame header. "
- "Frame dropped.\n", dev->name, err);
- stats->rx_errors++;
- goto drop;
+ printk(KERN_ERR "%s: Error %d setting MAC address\n",
+ dev->name, err);
+ return err;
}
- length = ntohs(hdr.len);
-
- /* Sanity checks */
- if (length < 3) { /* No for even an 802.2 LLC header */
- /* At least on Symbol firmware with PCF we get quite a
- lot of these legitimately - Poll frames with no
- data. */
- stats->rx_dropped++;
- goto drop;
+ /* Set up the link mode */
+ err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE,
+ priv->port_type);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting port type\n",
+ dev->name, err);
+ return err;
}
- if (length > IEEE802_11_DATA_LEN) {
- printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n",
- dev->name, length);
- stats->rx_length_errors++;
- stats->rx_errors++;
- goto drop;
+ /* Set the channel/frequency */
+ if (priv->channel == 0) {
+ printk(KERN_DEBUG "%s: Channel is 0 in __orinoco_program_rids()\n", dev->name);
+ if (priv->createibss)
+ priv->channel = 10;
+ }
+ err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFOWNCHANNEL,
+ priv->channel);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting channel\n",
+ dev->name, err);
+ return err;
+ }
+
+ if (priv->has_ibss) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFCREATEIBSS,
+ priv->createibss);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n", dev->name, err);
+ return err;
+ }
+
+ if ((strlen(priv->desired_essid) == 0) && (priv->createibss)
+ && (!priv->has_ibss_any)) {
+ printk(KERN_WARNING "%s: This firmware requires an "
+ "ESSID in IBSS-Ad-Hoc mode.\n", dev->name);
+ /* With wvlan_cs, in this case, we would crash.
+ * hopefully, this driver will behave better...
+ * Jean II */
+ }
+ }
+
+ /* Set the desired ESSID */
+ idbuf.len = cpu_to_le16(strlen(priv->desired_essid));
+ memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val));
+ /* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */
+ err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID,
+ HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
+ &idbuf);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting OWNSSID\n",
+ dev->name, err);
+ return err;
+ }
+ err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID,
+ HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
+ &idbuf);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set the station name */
+ idbuf.len = cpu_to_le16(strlen(priv->nick));
+ memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val));
+ err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
+ HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2),
+ &idbuf);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting nickname\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set AP density */
+ if (priv->has_sensitivity) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFSYSTEMSCALE,
+ priv->ap_density);
+ if (err) {
+ printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE. "
+ "Disabling sensitivity control\n",
+ dev->name, err);
+
+ priv->has_sensitivity = 0;
+ }
+ }
+
+ /* Set RTS threshold */
+ err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD,
+ priv->rts_thresh);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting RTS threshold\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set fragmentation threshold or MWO robustness */
+ if (priv->has_mwo)
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMWOROBUST_AGERE,
+ priv->mwo_robust);
+ else
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
+ priv->frag_thresh);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting fragmentation\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set bitrate */
+ err = __orinoco_hw_set_bitrate(priv);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting bitrate\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set power management */
+ if (priv->has_pm) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPMENABLED,
+ priv->pm_on);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting up PM\n",
+ dev->name, err);
+ return err;
+ }
+
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMULTICASTRECEIVE,
+ priv->pm_mcast);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting up PM\n",
+ dev->name, err);
+ return err;
+ }
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMAXSLEEPDURATION,
+ priv->pm_period);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting up PM\n",
+ dev->name, err);
+ return err;
+ }
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPMHOLDOVERDURATION,
+ priv->pm_timeout);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting up PM\n",
+ dev->name, err);
+ return err;
+ }
+ }
+
+ /* Set preamble - only for Symbol so far... */
+ if (priv->has_preamble) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPREAMBLE_SYMBOL,
+ priv->preamble);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting preamble\n",
+ dev->name, err);
+ return err;
+ }
+ }
+
+ /* Set up encryption */
+ if (priv->has_wep) {
+ err = __orinoco_hw_setup_wep(priv);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d activating WEP\n",
+ dev->name, err);
+ return err;
+ }
+ }
+
+ /* Set promiscuity / multicast*/
+ priv->promiscuous = 0;
+ priv->mc_count = 0;
+ __orinoco_set_multicast_list(dev); /* FIXME: what about the xmit_lock */
+
+ return 0;
+}
+
+/* FIXME: return int? */
+static void
+__orinoco_set_multicast_list(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ int promisc, mc_count;
+
+ /* The Hermes doesn't seem to have an allmulti mode, so we go
+ * into promiscuous mode and let the upper levels deal. */
+ if ( (dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) ||
+ (dev->mc_count > MAX_MULTICAST(priv)) ) {
+ promisc = 1;
+ mc_count = 0;
+ } else {
+ promisc = 0;
+ mc_count = dev->mc_count;
+ }
+
+ if (promisc != priv->promiscuous) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPROMISCUOUSMODE,
+ promisc);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting PROMISCUOUSMODE to 1.\n",
+ dev->name, err);
+ } else
+ priv->promiscuous = promisc;
+ }
+
+ if (! promisc && (mc_count || priv->mc_count) ) {
+ struct dev_mc_list *p = dev->mc_list;
+ struct hermes_multicast mclist;
+ int i;
+
+ for (i = 0; i < mc_count; i++) {
+ /* paranoia: is list shorter than mc_count? */
+ BUG_ON(! p);
+ /* paranoia: bad address size in list? */
+ BUG_ON(p->dmi_addrlen != ETH_ALEN);
+
+ memcpy(mclist.addr[i], p->dmi_addr, ETH_ALEN);
+ p = p->next;
+ }
+
+ if (p)
+ printk(KERN_WARNING "Multicast list is longer than mc_count\n");
+
+ err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFGROUPADDRESSES,
+ HERMES_BYTES_TO_RECLEN(priv->mc_count * ETH_ALEN),
+ &mclist);
+ if (err)
+ printk(KERN_ERR "%s: Error %d setting multicast list.\n",
+ dev->name, err);
+ else
+ priv->mc_count = mc_count;
+ }
+
+ /* Since we can set the promiscuous flag when it wasn't asked
+ for, make sure the net_device knows about it. */
+ if (priv->promiscuous)
+ dev->flags |= IFF_PROMISC;
+ else
+ dev->flags &= ~IFF_PROMISC;
+}
+
+static int orinoco_reconfigure(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct hermes *hw = &priv->hw;
+ unsigned long flags;
+ int err = 0;
+
+ if (priv->broken_disableport) {
+ schedule_work(&priv->reset_work);
+ return 0;
+ }
+
+ err = orinoco_lock(priv, &flags);
+ if (err)
+ return err;
+
+
+ err = hermes_disable_port(hw, 0);
+ if (err) {
+ printk(KERN_WARNING "%s: Unable to disable port while reconfiguring card\n",
+ dev->name);
+ priv->broken_disableport = 1;
+ goto out;
}
- /* We need space for the packet data itself, plus an ethernet
- header, plus 2 bytes so we can align the IP header on a
- 32bit boundary, plus 1 byte so we can read in odd length
- packets from the card, which has an IO granularity of 16
- bits */
- skb = dev_alloc_skb(length+ETH_HLEN+2+1);
- if (!skb) {
- printk(KERN_WARNING "%s: Can't allocate skb for Rx\n",
+ err = __orinoco_program_rids(dev);
+ if (err) {
+ printk(KERN_WARNING "%s: Unable to reconfigure card\n",
dev->name);
- goto drop;
+ goto out;
}
- skb_reserve(skb, 2); /* This way the IP header is aligned */
+ err = hermes_enable_port(hw, 0);
+ if (err) {
+ printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n",
+ dev->name);
+ goto out;
+ }
- /* Handle decapsulation
- * In most cases, the firmware tell us about SNAP frames.
- * For some reason, the SNAP frames sent by LinkSys APs
- * are not properly recognised by most firmwares.
- * So, check ourselves */
- if(((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) ||
- ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) ||
- is_ethersnap(&hdr)) {
- /* These indicate a SNAP within 802.2 LLC within
- 802.11 frame which we'll need to de-encapsulate to
- the original EthernetII frame. */
+ out:
+ if (err) {
+ printk(KERN_WARNING "%s: Resetting instead...\n", dev->name);
+ schedule_work(&priv->reset_work);
+ err = 0;
+ }
- if (length < ENCAPS_OVERHEAD) { /* No room for full LLC+SNAP */
- stats->rx_length_errors++;
- goto drop;
- }
+ orinoco_unlock(priv, &flags);
+ return err;
- /* Remove SNAP header, reconstruct EthernetII frame */
- data_len = length - ENCAPS_OVERHEAD;
- data_off = HERMES_802_3_OFFSET + sizeof(hdr);
+}
- eh = (struct ethhdr *)skb_put(skb, ETH_HLEN);
+/* This must be called from user context, without locks held - use
+ * schedule_work() */
+static void orinoco_reset(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct hermes *hw = &priv->hw;
+ int err;
+ unsigned long flags;
- memcpy(eh, &hdr, 2 * ETH_ALEN);
- eh->h_proto = hdr.ethertype;
- } else {
- /* All other cases indicate a genuine 802.3 frame. No
- decapsulation needed. We just throw the whole
- thing in, and hope the protocol layer can deal with
- it as 802.3 */
- data_len = length;
- data_off = HERMES_802_3_OFFSET;
- /* FIXME: we re-read from the card data we already read here */
+ err = orinoco_lock(priv, &flags);
+ if (err)
+ /* When the hardware becomes available again, whatever
+ * detects that is responsible for re-initializing
+ * it. So no need for anything further */
+ return;
+
+ netif_stop_queue(dev);
+
+ /* Shut off interrupts. Depending on what state the hardware
+ * is in, this might not work, but we'll try anyway */
+ hermes_set_irqmask(hw, 0);
+ hermes_write_regn(hw, EVACK, 0xffff);
+
+ priv->hw_unavailable++;
+ priv->last_linkstatus = 0xffff; /* firmware will have to reassociate */
+ priv->connected = 0;
+
+ orinoco_unlock(priv, &flags);
+
+ if (priv->hard_reset)
+ err = (*priv->hard_reset)(priv);
+ if (err) {
+ printk(KERN_ERR "%s: orinoco_reset: Error %d "
+ "performing hard reset\n", dev->name, err);
+ /* FIXME: shutdown of some sort */
+ return;
}
- p = skb_put(skb, data_len);
- err = hermes_bap_pread(hw, IRQ_BAP, p, RUP_EVEN(data_len),
- rxfid, data_off);
+ err = orinoco_reinit_firmware(dev);
if (err) {
- printk(KERN_ERR "%s: error %d reading frame. "
- "Frame dropped.\n", dev->name, err);
- stats->rx_errors++;
- goto drop;
+ printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n",
+ dev->name, err);
+ return;
}
- dev->last_rx = jiffies;
- skb->dev = dev;
- skb->protocol = eth_type_trans(skb, dev);
- skb->ip_summed = CHECKSUM_NONE;
-
- /* Process the wireless stats if needed */
- orinoco_stat_gather(dev, skb, &desc);
+ spin_lock_irq(&priv->lock); /* This has to be called from user context */
- /* Pass the packet to the networking stack */
- netif_rx(skb);
- stats->rx_packets++;
- stats->rx_bytes += length;
+ priv->hw_unavailable--;
- return;
+ /* priv->open or priv->hw_unavailable might have changed while
+ * we dropped the lock */
+ if (priv->open && (! priv->hw_unavailable)) {
+ err = __orinoco_up(dev);
+ if (err) {
+ printk(KERN_ERR "%s: orinoco_reset: Error %d reenabling card\n",
+ dev->name, err);
+ } else
+ dev->trans_start = jiffies;
+ }
- drop:
- stats->rx_dropped++;
+ spin_unlock_irq(&priv->lock);
- if (skb)
- dev_kfree_skb_irq(skb);
return;
}
-static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- struct net_device_stats *stats = &priv->stats;
- u16 fid = hermes_read_regn(hw, TXCOMPLFID);
- struct hermes_tx_descriptor desc;
- int err = 0;
-
- if (fid == DUMMY_FID)
- return; /* Nothing's really happened */
-
- err = hermes_bap_pread(hw, IRQ_BAP, &desc, sizeof(desc), fid, 0);
- if (err) {
- printk(KERN_WARNING "%s: Unable to read descriptor on Tx error "
- "(FID=%04X error %d)\n",
- dev->name, fid, err);
- } else {
- DEBUG(1, "%s: Tx error, status %d\n",
- dev->name, le16_to_cpu(desc.status));
- }
-
- stats->tx_errors++;
+/********************************************************************/
+/* Interrupt handler */
+/********************************************************************/
- hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
+static void __orinoco_ev_tick(struct net_device *dev, hermes_t *hw)
+{
+ printk(KERN_DEBUG "%s: TICK\n", dev->name);
}
-static void __orinoco_ev_tx(struct net_device *dev, hermes_t *hw)
+static void __orinoco_ev_wterr(struct net_device *dev, hermes_t *hw)
{
- struct orinoco_private *priv = netdev_priv(dev);
- struct net_device_stats *stats = &priv->stats;
-
- stats->tx_packets++;
-
- hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
+ /* This seems to happen a fair bit under load, but ignoring it
+ seems to work fine...*/
+ printk(KERN_DEBUG "%s: MAC controller error (WTERR). Ignoring.\n",
+ dev->name);
}
-static void __orinoco_ev_alloc(struct net_device *dev, hermes_t *hw)
+irqreturn_t orinoco_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
+ struct net_device *dev = (struct net_device *)dev_id;
struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int count = MAX_IRQLOOPS_PER_IRQ;
+ u16 evstat, events;
+ /* These are used to detect a runaway interrupt situation */
+ /* If we get more than MAX_IRQLOOPS_PER_JIFFY iterations in a jiffy,
+ * we panic and shut down the hardware */
+ static int last_irq_jiffy = 0; /* jiffies value the last time
+ * we were called */
+ static int loops_this_jiffy = 0;
+ unsigned long flags;
- u16 fid = hermes_read_regn(hw, ALLOCFID);
+ if (orinoco_lock(priv, &flags) != 0) {
+ /* If hw is unavailable - we don't know if the irq was
+ * for us or not */
+ return IRQ_HANDLED;
+ }
- if (fid != priv->txfid) {
- if (fid != DUMMY_FID)
- printk(KERN_WARNING "%s: Allocate event on unexpected fid (%04X)\n",
- dev->name, fid);
- return;
- } else {
- netif_wake_queue(dev);
+ evstat = hermes_read_regn(hw, EVSTAT);
+ events = evstat & hw->inten;
+ if (! events) {
+ orinoco_unlock(priv, &flags);
+ return IRQ_NONE;
}
+
+ if (jiffies != last_irq_jiffy)
+ loops_this_jiffy = 0;
+ last_irq_jiffy = jiffies;
- hermes_write_regn(hw, ALLOCFID, DUMMY_FID);
+ while (events && count--) {
+ if (++loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY) {
+ printk(KERN_WARNING "%s: IRQ handler is looping too "
+ "much! Resetting.\n", dev->name);
+ /* Disable interrupts for now */
+ hermes_set_irqmask(hw, 0);
+ schedule_work(&priv->reset_work);
+ break;
+ }
+
+ /* Check the card hasn't been removed */
+ if (! hermes_present(hw)) {
+ DEBUG(0, "orinoco_interrupt(): card removed\n");
+ break;
+ }
+
+ if (events & HERMES_EV_TICK)
+ __orinoco_ev_tick(dev, hw);
+ if (events & HERMES_EV_WTERR)
+ __orinoco_ev_wterr(dev, hw);
+ if (events & HERMES_EV_INFDROP)
+ __orinoco_ev_infdrop(dev, hw);
+ if (events & HERMES_EV_INFO)
+ __orinoco_ev_info(dev, hw);
+ if (events & HERMES_EV_RX)
+ __orinoco_ev_rx(dev, hw);
+ if (events & HERMES_EV_TXEXC)
+ __orinoco_ev_txexc(dev, hw);
+ if (events & HERMES_EV_TX)
+ __orinoco_ev_tx(dev, hw);
+ if (events & HERMES_EV_ALLOC)
+ __orinoco_ev_alloc(dev, hw);
+
+ hermes_write_regn(hw, EVACK, events);
+
+ evstat = hermes_read_regn(hw, EVSTAT);
+ events = evstat & hw->inten;
+ };
+
+ orinoco_unlock(priv, &flags);
+ return IRQ_HANDLED;
}
+/********************************************************************/
+/* Initialization */
+/********************************************************************/
+
struct sta_id {
u16 id, variant, major, minor;
} __attribute__ ((packed));
dev->name, err);
memset(&sta_id, 0, sizeof(sta_id));
}
+
le16_to_cpus(&sta_id.id);
le16_to_cpus(&sta_id.variant);
le16_to_cpus(&sta_id.major);
le16_to_cpus(&sta_id.minor);
-
printk(KERN_DEBUG "%s: Station identity %04x:%04x:%04x:%04x\n",
dev->name, sta_id.id, sta_id.variant,
sta_id.major, sta_id.minor);
}
}
-/*
- * struct net_device methods
- */
-
-static int
-orinoco_init(struct net_device *dev)
+static int orinoco_init(struct net_device *dev)
{
struct orinoco_private *priv = netdev_priv(dev);
hermes_t *hw = &priv->hw;
err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD,
&priv->rts_thresh);
if (err) {
- printk(KERN_ERR "%s: failed to read RTS threshold!\n", dev->name);
+ printk(KERN_ERR "%s: failed to read RTS threshold!\n",
+ dev->name);
goto out;
}
err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
&priv->frag_thresh);
if (err) {
- printk(KERN_ERR "%s: failed to read fragmentation settings!\n", dev->name);
+ printk(KERN_ERR "%s: failed to read fragmentation settings!\n",
+ dev->name);
goto out;
}
/* Preamble setup */
if (priv->has_preamble) {
- err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPREAMBLE_SYMBOL,
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPREAMBLE_SYMBOL,
&priv->preamble);
if (err)
goto out;
return err;
}
-struct net_device_stats *
-orinoco_get_stats(struct net_device *dev)
-{
- struct orinoco_private *priv = netdev_priv(dev);
-
- return &priv->stats;
-}
-
-struct iw_statistics *
-orinoco_get_wireless_stats(struct net_device *dev)
+struct net_device *alloc_orinocodev(int sizeof_card,
+ int (*hard_reset)(struct orinoco_private *))
{
- struct orinoco_private *priv = netdev_priv(dev);
- hermes_t *hw = &priv->hw;
- struct iw_statistics *wstats = &priv->wstats;
- int err = 0;
- unsigned long flags;
-
- if (! netif_device_present(dev)) {
- printk(KERN_WARNING "%s: get_wireless_stats() called while device not present\n",
- dev->name);
- return NULL; /* FIXME: Can we do better than this? */
- }
+ struct net_device *dev;
+ struct orinoco_private *priv;
- err = orinoco_lock(priv, &flags);
- if (err)
- return NULL; /* FIXME: Erg, we've been signalled, how
- * do we propagate this back up? */
+ dev = alloc_etherdev(sizeof(struct orinoco_private) + sizeof_card);
+ if (! dev)
+ return NULL;
+ priv = netdev_priv(dev);
+ priv->ndev = dev;
+ if (sizeof_card)
+ priv->card = (void *)((unsigned long)netdev_priv(dev)
+ + sizeof(struct orinoco_private));
+ else
+ priv->card = NULL;
- if (priv->iw_mode == IW_MODE_ADHOC) {
- memset(&wstats->qual, 0, sizeof(wstats->qual));
- /* If a spy address is defined, we report stats of the
- * first spy address - Jean II */
- if (SPY_NUMBER(priv)) {
- wstats->qual.qual = priv->spy_stat[0].qual;
- wstats->qual.level = priv->spy_stat[0].level;
- wstats->qual.noise = priv->spy_stat[0].noise;
- wstats->qual.updated = priv->spy_stat[0].updated;
- }
- } else {
- struct {
- u16 qual, signal, noise;
- } __attribute__ ((packed)) cq;
+ /* Setup / override net_device fields */
+ dev->init = orinoco_init;
+ dev->hard_start_xmit = orinoco_xmit;
+ dev->tx_timeout = orinoco_tx_timeout;
+ dev->watchdog_timeo = HZ; /* 1 second timeout */
+ dev->get_stats = orinoco_get_stats;
+ dev->get_wireless_stats = orinoco_get_wireless_stats;
+ dev->do_ioctl = orinoco_ioctl;
+ dev->change_mtu = orinoco_change_mtu;
+ dev->set_multicast_list = orinoco_set_multicast_list;
+ /* we use the default eth_mac_addr for setting the MAC addr */
- err = HERMES_READ_RECORD(hw, USER_BAP,
- HERMES_RID_COMMSQUALITY, &cq);
-
- wstats->qual.qual = (int)le16_to_cpu(cq.qual);
- wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95;
- wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95;
- wstats->qual.updated = 7;
- }
+ /* Set up default callbacks */
+ dev->open = orinoco_open;
+ dev->stop = orinoco_stop;
+ priv->hard_reset = hard_reset;
- /* We can't really wait for the tallies inquiry command to
- * complete, so we just use the previous results and trigger
- * a new tallies inquiry command for next time - Jean II */
- /* FIXME: We're in user context (I think?), so we should just
- wait for the tallies to come through */
- err = hermes_inquire(hw, HERMES_INQ_TALLIES);
-
- orinoco_unlock(priv, &flags);
+ spin_lock_init(&priv->lock);
+ priv->open = 0;
+ priv->hw_unavailable = 1; /* orinoco_init() must clear this
+ * before anything else touches the
+ * hardware */
+ INIT_WORK(&priv->reset_work, (void (*)(void *))orinoco_reset, dev);
- if (err)
- return NULL;
-
- return wstats;
-}
+ priv->last_linkstatus = 0xffff;
+ priv->connected = 0;
-static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac,
- int level, int noise)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- int i;
+ return dev;
- /* Gather wireless spy statistics: for each packet, compare the
- * source address with out list, and if match, get the stats... */
- for (i = 0; i < priv->spy_number; i++)
- if (!memcmp(mac, priv->spy_address[i], ETH_ALEN)) {
- priv->spy_stat[i].level = level - 0x95;
- priv->spy_stat[i].noise = noise - 0x95;
- priv->spy_stat[i].qual = (level > noise) ? (level - noise) : 0;
- priv->spy_stat[i].updated = 7;
- }
}
-void
-orinoco_stat_gather(struct net_device *dev,
- struct sk_buff *skb,
- struct hermes_rx_descriptor *desc)
-{
- struct orinoco_private *priv = netdev_priv(dev);
-
- /* Using spy support with lots of Rx packets, like in an
- * infrastructure (AP), will really slow down everything, because
- * the MAC address must be compared to each entry of the spy list.
- * If the user really asks for it (set some address in the
- * spy list), we do it, but he will pay the price.
- * Note that to get here, you need both WIRELESS_SPY
- * compiled in AND some addresses in the list !!!
- */
- /* Note : gcc will optimise the whole section away if
- * WIRELESS_SPY is not defined... - Jean II */
- if (SPY_NUMBER(priv)) {
- orinoco_spy_gather(dev, skb->mac.raw + ETH_ALEN,
- desc->signal, desc->silence);
- }
-}
+/********************************************************************/
+/* Wireless extensions */
+/********************************************************************/
-static int
-orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
+static int orinoco_hw_get_bssid(struct orinoco_private *priv,
+ char buf[ETH_ALEN])
{
- struct orinoco_private *priv = netdev_priv(dev);
- struct net_device_stats *stats = &priv->stats;
hermes_t *hw = &priv->hw;
int err = 0;
- u16 txfid = priv->txfid;
- char *p;
- struct ethhdr *eh;
- int len, data_len, data_off;
- struct hermes_tx_descriptor desc;
unsigned long flags;
- TRACE_ENTER(dev->name);
+ err = orinoco_lock(priv, &flags);
+ if (err)
+ return err;
- if (! netif_running(dev)) {
- printk(KERN_ERR "%s: Tx on stopped device!\n",
- dev->name);
- TRACE_EXIT(dev->name);
- return 1;
- }
-
- if (netif_queue_stopped(dev)) {
- printk(KERN_DEBUG "%s: Tx while transmitter busy!\n",
- dev->name);
- TRACE_EXIT(dev->name);
- return 1;
- }
-
- if (orinoco_lock(priv, &flags) != 0) {
- printk(KERN_ERR "%s: orinoco_xmit() called while hw_unavailable\n",
- dev->name);
- TRACE_EXIT(dev->name);
-/* BUG(); */
- return 1;
- }
+ err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID,
+ ETH_ALEN, NULL, buf);
- if (! priv->connected) {
- /* Oops, the firmware hasn't established a connection,
- silently drop the packet (this seems to be the
- safest approach). */
- stats->tx_errors++;
- orinoco_unlock(priv, &flags);
- dev_kfree_skb(skb);
- TRACE_EXIT(dev->name);
- return 0;
- }
+ orinoco_unlock(priv, &flags);
- /* Length of the packet body */
- /* FIXME: what if the skb is smaller than this? */
- len = max_t(int,skb->len - ETH_HLEN, ETH_ZLEN - ETH_HLEN);
+ return err;
+}
- eh = (struct ethhdr *)skb->data;
+static int orinoco_hw_get_essid(struct orinoco_private *priv, int *active,
+ char buf[IW_ESSID_MAX_SIZE+1])
+{
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ struct hermes_idstring essidbuf;
+ char *p = (char *)(&essidbuf.val);
+ int len;
+ unsigned long flags;
- memset(&desc, 0, sizeof(desc));
- desc.tx_control = cpu_to_le16(HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX);
- err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), txfid, 0);
- if (err) {
- printk(KERN_ERR "%s: Error %d writing Tx descriptor to BAP\n",
- dev->name, err);
- stats->tx_errors++;
- goto fail;
- }
+ err = orinoco_lock(priv, &flags);
+ if (err)
+ return err;
- /* Clear the 802.11 header and data length fields - some
- * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused
- * if this isn't done. */
- hermes_clear_words(hw, HERMES_DATA0,
- HERMES_802_3_OFFSET - HERMES_802_11_OFFSET);
+ if (strlen(priv->desired_essid) > 0) {
+ /* We read the desired SSID from the hardware rather
+ than from priv->desired_essid, just in case the
+ firmware is allowed to change it on us. I'm not
+ sure about this */
+ /* My guess is that the OWNSSID should always be whatever
+ * we set to the card, whereas CURRENT_SSID is the one that
+ * may change... - Jean II */
+ u16 rid;
- /* Encapsulate Ethernet-II frames */
- if (ntohs(eh->h_proto) > 1500) { /* Ethernet-II frame */
- struct header_struct hdr;
- data_len = len;
- data_off = HERMES_802_3_OFFSET + sizeof(hdr);
- p = skb->data + ETH_HLEN;
+ *active = 1;
- /* 802.3 header */
- memcpy(hdr.dest, eh->h_dest, ETH_ALEN);
- memcpy(hdr.src, eh->h_source, ETH_ALEN);
- hdr.len = htons(data_len + ENCAPS_OVERHEAD);
+ rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID :
+ HERMES_RID_CNFDESIREDSSID;
- /* 802.2 header */
- memcpy(&hdr.dsap, &encaps_hdr, sizeof(encaps_hdr));
-
- hdr.ethertype = eh->h_proto;
- err = hermes_bap_pwrite(hw, USER_BAP, &hdr, sizeof(hdr),
- txfid, HERMES_802_3_OFFSET);
- if (err) {
- printk(KERN_ERR "%s: Error %d writing packet header to BAP\n",
- dev->name, err);
- stats->tx_errors++;
- goto fail;
- }
- } else { /* IEEE 802.3 frame */
- data_len = len + ETH_HLEN;
- data_off = HERMES_802_3_OFFSET;
- p = skb->data;
- }
+ err = hermes_read_ltv(hw, USER_BAP, rid, sizeof(essidbuf),
+ NULL, &essidbuf);
+ if (err)
+ goto fail_unlock;
+ } else {
+ *active = 0;
- /* Round up for odd length packets */
- err = hermes_bap_pwrite(hw, USER_BAP, p, RUP_EVEN(data_len), txfid, data_off);
- if (err) {
- printk(KERN_ERR "%s: Error %d writing packet to BAP\n",
- dev->name, err);
- stats->tx_errors++;
- goto fail;
+ err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID,
+ sizeof(essidbuf), NULL, &essidbuf);
+ if (err)
+ goto fail_unlock;
}
- /* Finally, we actually initiate the send */
- netif_stop_queue(dev);
-
- err = hermes_docmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL, txfid, NULL);
- if (err) {
- netif_start_queue(dev);
- printk(KERN_ERR "%s: Error %d transmitting packet\n", dev->name, err);
- stats->tx_errors++;
- goto fail;
- }
+ len = le16_to_cpu(essidbuf.len);
- dev->trans_start = jiffies;
- stats->tx_bytes += data_off + data_len;
+ memset(buf, 0, IW_ESSID_MAX_SIZE+1);
+ memcpy(buf, p, len);
+ buf[len] = '\0';
+ fail_unlock:
orinoco_unlock(priv, &flags);
- dev_kfree_skb(skb);
-
- TRACE_EXIT(dev->name);
-
- return 0;
- fail:
- TRACE_EXIT(dev->name);
-
- orinoco_unlock(priv, &flags);
- return err;
+ return err;
}
-static void
-orinoco_tx_timeout(struct net_device *dev)
+static long orinoco_hw_get_freq(struct orinoco_private *priv)
{
- struct orinoco_private *priv = netdev_priv(dev);
- struct net_device_stats *stats = &priv->stats;
- struct hermes *hw = &priv->hw;
-
- printk(KERN_WARNING "%s: Tx timeout! "
- "ALLOCFID=%04x, TXCOMPLFID=%04x, EVSTAT=%04x\n",
- dev->name, hermes_read_regn(hw, ALLOCFID),
- hermes_read_regn(hw, TXCOMPLFID), hermes_read_regn(hw, EVSTAT));
-
- stats->tx_errors++;
+
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ u16 channel;
+ long freq = 0;
+ unsigned long flags;
- schedule_work(&priv->reset_work);
-}
+ err = orinoco_lock(priv, &flags);
+ if (err)
+ return err;
+
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CURRENTCHANNEL, &channel);
+ if (err)
+ goto out;
-static int
-orinoco_change_mtu(struct net_device *dev, int new_mtu)
-{
- struct orinoco_private *priv = netdev_priv(dev);
+ /* Intersil firmware 1.3.5 returns 0 when the interface is down */
+ if (channel == 0) {
+ err = -EBUSY;
+ goto out;
+ }
- if ( (new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU) )
- return -EINVAL;
+ if ( (channel < 1) || (channel > NUM_CHANNELS) ) {
+ printk(KERN_WARNING "%s: Channel out of range (%d)!\n",
+ priv->ndev->name, channel);
+ err = -EBUSY;
+ goto out;
- if ( (new_mtu + ENCAPS_OVERHEAD + IEEE802_11_HLEN) >
- (priv->nicbuf_size - ETH_HLEN) )
- return -EINVAL;
+ }
+ freq = channel_frequency[channel-1] * 100000;
- dev->mtu = new_mtu;
+ out:
+ orinoco_unlock(priv, &flags);
- return 0;
+ if (err > 0)
+ err = -EBUSY;
+ return err ? err : freq;
}
-/* FIXME: return int? */
-static void
-__orinoco_set_multicast_list(struct net_device *dev)
+static int orinoco_hw_get_bitratelist(struct orinoco_private *priv,
+ int *numrates, s32 *rates, int max)
{
- struct orinoco_private *priv = netdev_priv(dev);
hermes_t *hw = &priv->hw;
+ struct hermes_idstring list;
+ unsigned char *p = (unsigned char *)&list.val;
int err = 0;
- int promisc, mc_count;
-
- /* The Hermes doesn't seem to have an allmulti mode, so we go
- * into promiscuous mode and let the upper levels deal. */
- if ( (dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) ||
- (dev->mc_count > MAX_MULTICAST(priv)) ) {
- promisc = 1;
- mc_count = 0;
- } else {
- promisc = 0;
- mc_count = dev->mc_count;
- }
+ int num;
+ int i;
+ unsigned long flags;
- if (promisc != priv->promiscuous) {
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFPROMISCUOUSMODE,
- promisc);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting PROMISCUOUSMODE to 1.\n",
- dev->name, err);
- } else
- priv->promiscuous = promisc;
- }
+ err = orinoco_lock(priv, &flags);
+ if (err)
+ return err;
- if (! promisc && (mc_count || priv->mc_count) ) {
- struct dev_mc_list *p = dev->mc_list;
- hermes_multicast_t mclist;
- int i;
+ err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES,
+ sizeof(list), NULL, &list);
+ orinoco_unlock(priv, &flags);
- for (i = 0; i < mc_count; i++) {
- /* Paranoia: */
- if (! p)
- BUG(); /* Multicast list shorter than mc_count */
- if (p->dmi_addrlen != ETH_ALEN)
- BUG(); /* Bad address size in multicast list */
-
- memcpy(mclist.addr[i], p->dmi_addr, ETH_ALEN);
- p = p->next;
- }
-
- if (p)
- printk(KERN_WARNING "Multicast list is longer than mc_count\n");
+ if (err)
+ return err;
+
+ num = le16_to_cpu(list.len);
+ *numrates = num;
+ num = min(num, max);
- err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFGROUPADDRESSES,
- HERMES_BYTES_TO_RECLEN(priv->mc_count * ETH_ALEN),
- &mclist);
- if (err)
- printk(KERN_ERR "%s: Error %d setting multicast list.\n",
- dev->name, err);
- else
- priv->mc_count = mc_count;
+ for (i = 0; i < num; i++) {
+ rates[i] = (p[i] & 0x7f) * 500000; /* convert to bps */
}
- /* Since we can set the promiscuous flag when it wasn't asked
- for, make sure the net_device knows about it. */
- if (priv->promiscuous)
- dev->flags |= IFF_PROMISC;
- else
- dev->flags &= ~IFF_PROMISC;
+ return 0;
}
-/********************************************************************/
-/* Wireless extensions support */
-/********************************************************************/
-
static int orinoco_ioctl_getiwrange(struct net_device *dev, struct iw_point *rrq)
{
struct orinoco_private *priv = netdev_priv(dev);
/* Much of this shamelessly taken from wvlan_cs.c. No idea
* what it all means -dgibson */
-#if WIRELESS_EXT > 10
range.we_version_compiled = WIRELESS_EXT;
range.we_version_source = 11;
-#endif /* WIRELESS_EXT > 10 */
range.min_nwid = range.max_nwid = 0; /* We don't use nwids */
range.max_qual.qual = 0;
range.max_qual.level = 0;
range.max_qual.noise = 0;
-#if WIRELESS_EXT > 11
range.avg_qual.qual = 0;
range.avg_qual.level = 0;
range.avg_qual.noise = 0;
-#endif /* WIRELESS_EXT > 11 */
-
} else {
range.max_qual.qual = 0x8b - 0x2f;
range.max_qual.level = 0x2f - 0x95 - 1;
range.max_qual.noise = 0x2f - 0x95 - 1;
-#if WIRELESS_EXT > 11
/* Need to get better values */
range.avg_qual.qual = 0x24;
range.avg_qual.level = 0xC2;
range.avg_qual.noise = 0x9E;
-#endif /* WIRELESS_EXT > 11 */
}
err = orinoco_hw_get_bitratelist(priv, &numrates,
range.txpower[0] = 15; /* 15dBm */
range.txpower_capa = IW_TXPOW_DBM;
-#if WIRELESS_EXT > 10
range.retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME;
range.retry_flags = IW_RETRY_LIMIT;
range.r_time_flags = IW_RETRY_LIFETIME;
range.max_retry = 65535; /* ??? */
range.min_r_time = 0;
range.max_r_time = 65535 * 1000; /* ??? */
-#endif /* WIRELESS_EXT > 10 */
if (copy_to_user(rrq->pointer, &range, sizeof(range)))
return -EFAULT;
if ((index < 0) || (index >= ORINOCO_MAX_KEYS))
index = priv->tx_key;
-
+
+ /* Adjust key length to a supported value */
if (erq->length > SMALL_KEY_SIZE) {
xlen = LARGE_KEY_SIZE;
} else if (erq->length > 0) {
if (erq->pointer) {
priv->keys[index].len = cpu_to_le16(xlen);
- memset(priv->keys[index].data, 0, sizeof(priv->keys[index].data));
+ memset(priv->keys[index].data, 0,
+ sizeof(priv->keys[index].data));
memcpy(priv->keys[index].data, keybuf, erq->length);
}
priv->tx_key = setindex;
priv->wep_on = enable;
priv->wep_restrict = restricted;
-
out:
orinoco_unlock(priv, &flags);
err = orinoco_lock(priv, &flags);
if (err)
return err;
- err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFSYSTEMSCALE, &val);
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFSYSTEMSCALE, &val);
orinoco_unlock(priv, &flags);
if (err)
ratemode = priv->bitratemode;
- if ( (ratemode < 0) || (ratemode >= BITRATE_TABLE_SIZE) )
- BUG();
+ BUG_ON((ratemode < 0) || (ratemode >= BITRATE_TABLE_SIZE));
rrq->value = bitrate_table[ratemode].bitrate * 100000;
rrq->fixed = ! bitrate_table[ratemode].automatic;
return err;
}
-#if WIRELESS_EXT > 10
static int orinoco_ioctl_getretry(struct net_device *dev, struct iw_param *rrq)
{
struct orinoco_private *priv = netdev_priv(dev);
return err;
}
-#endif /* WIRELESS_EXT > 10 */
static int orinoco_ioctl_setibssport(struct net_device *dev, struct iwreq *wrq)
{
*val = priv->prefer_port3;
orinoco_unlock(priv, &flags);
-
return 0;
}
wrq->u.txpower.flags = IW_TXPOW_DBM;
break;
-#if WIRELESS_EXT > 10
case SIOCSIWRETRY:
err = -EOPNOTSUPP;
break;
case SIOCGIWRETRY:
err = orinoco_ioctl_getretry(dev, &wrq->u.retry);
break;
-#endif /* WIRELESS_EXT > 10 */
case SIOCSIWSPY:
err = orinoco_ioctl_setspy(dev, &wrq->u.data);
return 0;
}
-struct net_device *alloc_orinocodev(int sizeof_card, int (*hard_reset)(struct orinoco_private *))
-{
- struct net_device *dev;
- struct orinoco_private *priv;
-
- dev = alloc_etherdev(sizeof(struct orinoco_private) + sizeof_card);
- if (!dev)
- return NULL;
- priv = netdev_priv(dev);
- priv->ndev = dev;
- if (sizeof_card)
- priv->card = (void *)((unsigned long)dev->priv + sizeof(struct orinoco_private));
- else
- priv->card = NULL;
-
- /* Setup / override net_device fields */
- dev->init = orinoco_init;
- dev->hard_start_xmit = orinoco_xmit;
- dev->tx_timeout = orinoco_tx_timeout;
- dev->watchdog_timeo = HZ; /* 1 second timeout */
- dev->get_stats = orinoco_get_stats;
- dev->get_wireless_stats = orinoco_get_wireless_stats;
- dev->do_ioctl = orinoco_ioctl;
- dev->change_mtu = orinoco_change_mtu;
- dev->set_multicast_list = orinoco_set_multicast_list;
- /* we use the default eth_mac_addr for setting the MAC addr */
-
- /* Set up default callbacks */
- dev->open = orinoco_open;
- dev->stop = orinoco_stop;
- priv->hard_reset = hard_reset;
+/********************************************************************/
+/* Debugging */
+/********************************************************************/
- spin_lock_init(&priv->lock);
- priv->open = 0;
- priv->hw_unavailable = 1; /* orinoco_init() must clear this
- * before anything else touches the
- * hardware */
- INIT_WORK(&priv->reset_work, (void (*)(void *))orinoco_reset, dev);
+#if 0
+static void show_rx_frame(struct orinoco_rxframe_hdr *frame)
+{
+ printk(KERN_DEBUG "RX descriptor:\n");
+ printk(KERN_DEBUG " status = 0x%04x\n", frame->desc.status);
+ printk(KERN_DEBUG " time = 0x%08x\n", frame->desc.time);
+ printk(KERN_DEBUG " silence = 0x%02x\n", frame->desc.silence);
+ printk(KERN_DEBUG " signal = 0x%02x\n", frame->desc.signal);
+ printk(KERN_DEBUG " rate = 0x%02x\n", frame->desc.rate);
+ printk(KERN_DEBUG " rxflow = 0x%02x\n", frame->desc.rxflow);
+ printk(KERN_DEBUG " reserved = 0x%08x\n", frame->desc.reserved);
- priv->last_linkstatus = 0xffff;
- priv->connected = 0;
+ printk(KERN_DEBUG "IEEE 802.11 header:\n");
+ printk(KERN_DEBUG " frame_ctl = 0x%04x\n",
+ frame->p80211.frame_ctl);
+ printk(KERN_DEBUG " duration_id = 0x%04x\n",
+ frame->p80211.duration_id);
+ printk(KERN_DEBUG " addr1 = %02x:%02x:%02x:%02x:%02x:%02x\n",
+ frame->p80211.addr1[0], frame->p80211.addr1[1],
+ frame->p80211.addr1[2], frame->p80211.addr1[3],
+ frame->p80211.addr1[4], frame->p80211.addr1[5]);
+ printk(KERN_DEBUG " addr2 = %02x:%02x:%02x:%02x:%02x:%02x\n",
+ frame->p80211.addr2[0], frame->p80211.addr2[1],
+ frame->p80211.addr2[2], frame->p80211.addr2[3],
+ frame->p80211.addr2[4], frame->p80211.addr2[5]);
+ printk(KERN_DEBUG " addr3 = %02x:%02x:%02x:%02x:%02x:%02x\n",
+ frame->p80211.addr3[0], frame->p80211.addr3[1],
+ frame->p80211.addr3[2], frame->p80211.addr3[3],
+ frame->p80211.addr3[4], frame->p80211.addr3[5]);
+ printk(KERN_DEBUG " seq_ctl = 0x%04x\n",
+ frame->p80211.seq_ctl);
+ printk(KERN_DEBUG " addr4 = %02x:%02x:%02x:%02x:%02x:%02x\n",
+ frame->p80211.addr4[0], frame->p80211.addr4[1],
+ frame->p80211.addr4[2], frame->p80211.addr4[3],
+ frame->p80211.addr4[4], frame->p80211.addr4[5]);
+ printk(KERN_DEBUG " data_len = 0x%04x\n",
+ frame->p80211.data_len);
- return dev;
+ printk(KERN_DEBUG "IEEE 802.3 header:\n");
+ printk(KERN_DEBUG " dest = %02x:%02x:%02x:%02x:%02x:%02x\n",
+ frame->p8023.h_dest[0], frame->p8023.h_dest[1],
+ frame->p8023.h_dest[2], frame->p8023.h_dest[3],
+ frame->p8023.h_dest[4], frame->p8023.h_dest[5]);
+ printk(KERN_DEBUG " src = %02x:%02x:%02x:%02x:%02x:%02x\n",
+ frame->p8023.h_source[0], frame->p8023.h_source[1],
+ frame->p8023.h_source[2], frame->p8023.h_source[3],
+ frame->p8023.h_source[4], frame->p8023.h_source[5]);
+ printk(KERN_DEBUG " len = 0x%04x\n", frame->p8023.h_proto);
+ printk(KERN_DEBUG "IEEE 802.2 LLC/SNAP header:\n");
+ printk(KERN_DEBUG " DSAP = 0x%02x\n", frame->p8022.dsap);
+ printk(KERN_DEBUG " SSAP = 0x%02x\n", frame->p8022.ssap);
+ printk(KERN_DEBUG " ctrl = 0x%02x\n", frame->p8022.ctrl);
+ printk(KERN_DEBUG " OUI = %02x:%02x:%02x\n",
+ frame->p8022.oui[0], frame->p8022.oui[1], frame->p8022.oui[2]);
+ printk(KERN_DEBUG " ethertype = 0x%04x\n", frame->ethertype);
}
+#endif /* 0 */
/********************************************************************/
/* Module initialization */
/* Can't be declared "const" or the whole __initdata section will
* become const */
-static char version[] __initdata = "orinoco.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au> and others)";
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
+ " (David Gibson <hermes@gibson.dropbear.id.au>, "
+ "Pavel Roskin <proski@gnu.org>, et al)";
static int __init init_orinoco(void)
{
git://git.onelab.eu / linux-2.6.git / blobdiff