-/* orinoco_pci.c 0.13e
+/* orinoco_pci.c
*
* Driver for Prism II devices that have a direct PCI interface
* (i.e., not in a Pcmcia or PLX bridge)
*
* Specifically here we're talking about the Linksys WMP11
*
+ * Current maintainers (as of 29 September 2003) are:
+ * Pavel Roskin <proski AT gnu.org>
+ * and David Gibson <hermes AT gibson.dropbear.id.au>
+ *
* Some of this code is borrowed from orinoco_plx.c
- * Copyright (C) 2001 Daniel Barlow <dan@telent.net>
+ * Copyright (C) 2001 Daniel Barlow <dan AT telent.net>
* Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing
* has been copied from it. linux-wlan-ng-0.1.10 is originally :
* Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
* This file originally written by:
- * Copyright (C) 2001 Jean Tourrilhes <jt@hpl.hp.com>
+ * Copyright (C) 2001 Jean Tourrilhes <jt AT hpl.hp.com>
* And is now maintained by:
- * Copyright (C) 2002 David Gibson, IBM Corporation <herme@gibson.dropbear.id.au>
+ * (C) Copyright David Gibson, IBM Corp. 2002-2003.
*
* The contents of this file are subject to the Mozilla Public License
* Version 1.1 (the "License"); you may not use this file except in
* Jean II
*/
+#define DRIVER_NAME "orinoco_pci"
+#define PFX DRIVER_NAME ": "
+
#include <linux/config.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/if_arp.h>
#include <linux/etherdevice.h>
-#include <linux/wireless.h>
#include <linux/list.h>
#include <linux/pci.h>
#include <linux/fcntl.h>
}
/* Did we timeout ? */
if(time_after_eq(jiffies, timeout)) {
- printk(KERN_ERR "orinoco_pci: Busy timeout\n");
+ printk(KERN_ERR PFX "Busy timeout\n");
return -ETIMEDOUT;
}
printk(KERN_NOTICE "pci_cor : reg = 0x%X - %lX - %lX\n", reg, timeout, jiffies);
if (! pci_iorange)
goto fail;
- /* Usual setup of structures */
+ /* Allocate network device */
dev = alloc_orinocodev(0, NULL);
if (! dev) {
err = -ENOMEM;
goto fail;
}
- priv = dev->priv;
+ priv = netdev_priv(dev);
dev->base_addr = (unsigned long) pci_ioaddr;
dev->mem_start = pci_iorange;
dev->mem_end = pci_iorange + pci_iolen - 1;
-
SET_MODULE_OWNER(dev);
SET_NETDEV_DEV(dev, &pdev->dev);
- printk(KERN_DEBUG
+ printk(KERN_DEBUG PFX
"Detected Orinoco/Prism2 PCI device at %s, mem:0x%lX to 0x%lX -> 0x%p, irq:%d\n",
pci_name(pdev), dev->mem_start, dev->mem_end, pci_ioaddr, pdev->irq);
err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ,
dev->name, dev);
if (err) {
- printk(KERN_ERR "orinoco_pci: Error allocating IRQ %d.\n",
+ printk(KERN_ERR PFX "Error allocating IRQ %d.\n",
pdev->irq);
err = -EBUSY;
goto fail;
}
dev->irq = pdev->irq;
+
/* Perform a COR reset to start the card */
if(orinoco_pci_cor_reset(priv) != 0) {
printk(KERN_ERR "%s: Failed to start the card\n", dev->name);
goto fail;
}
- return 0; /* succeeded */
+ return 0;
+
fail:
if (dev) {
if (dev->irq)
static void __devexit orinoco_pci_remove_one(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
- struct orinoco_private *priv = dev->priv;
+ struct orinoco_private *priv = netdev_priv(dev);
unregister_netdev(dev);
- if (dev->irq)
+ if (dev->irq)
free_irq(dev->irq, dev);
if (priv->hw.iobase)
static int orinoco_pci_suspend(struct pci_dev *pdev, u32 state)
{
struct net_device *dev = pci_get_drvdata(pdev);
- struct orinoco_private *priv = dev->priv;
+ struct orinoco_private *priv = netdev_priv(dev);
unsigned long flags;
int err;
static int orinoco_pci_resume(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
- struct orinoco_private *priv = dev->priv;
+ struct orinoco_private *priv = netdev_priv(dev);
unsigned long flags;
int err;
}
static struct pci_device_id orinoco_pci_pci_id_table[] = {
+ /* Intersil Prism 3 */
{0x1260, 0x3872, PCI_ANY_ID, PCI_ANY_ID,},
+ /* Intersil Prism 2.5 */
{0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID,},
{0,},
};
MODULE_DEVICE_TABLE(pci, orinoco_pci_pci_id_table);
static struct pci_driver orinoco_pci_driver = {
- .name = "orinoco_pci",
+ .name = DRIVER_NAME,
.id_table = orinoco_pci_pci_id_table,
.probe = orinoco_pci_init_one,
.remove = __devexit_p(orinoco_pci_remove_one),
.resume = orinoco_pci_resume,
};
-static char version[] __initdata = "orinoco_pci.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au> & Jean Tourrilhes <jt@hpl.hp.com>)";
-MODULE_AUTHOR("David Gibson <hermes@gibson.dropbear.id.au>");
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
+ " (Pavel Roskin <proski@gnu.org>,"
+ " David Gibson <hermes@gibson.dropbear.id.au> &"
+ " Jean Tourrilhes <jt@hpl.hp.com>)";
+MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & David Gibson <hermes@gibson.dropbear.id.au>");
MODULE_DESCRIPTION("Driver for wireless LAN cards using direct PCI interface");
MODULE_LICENSE("Dual MPL/GPL");
return pci_module_init(&orinoco_pci_driver);
}
-void __exit orinoco_pci_exit(void)
+static void __exit orinoco_pci_exit(void)
{
pci_unregister_driver(&orinoco_pci_driver);
}
git://git.onelab.eu / linux-2.6.git / blobdiff