Fedora kernel-2.6.17-1.2142_FC4 patched with stable patch-2.6.17.4-vs2.0.2-rc26.diff
[linux-2.6.git] / drivers / net / wireless / wavelan.c
index 7a5e20a..dade4b9 100644 (file)
@@ -102,7 +102,7 @@ static inline void hacr_write(unsigned long ioaddr, u16 hacr)
  * Write to card's Host Adapter Command Register. Include a delay for
  * those times when it is needed.
  */
-static inline void hacr_write_slow(unsigned long ioaddr, u16 hacr)
+static void hacr_write_slow(unsigned long ioaddr, u16 hacr)
 {
        hacr_write(ioaddr, hacr);
        /* delay might only be needed sometimes */
@@ -242,7 +242,7 @@ static void psa_write(unsigned long ioaddr, u16 hacr, int o,        /* Offset in PSA */
  * The Windows drivers don't use the CRC, but the AP and the PtP tool
  * depend on it.
  */
-static inline u16 psa_crc(u8 * psa,    /* The PSA */
+static u16 psa_crc(u8 * psa,   /* The PSA */
                              int size)
 {                              /* Number of short for CRC */
        int byte_cnt;           /* Loop on the PSA */
@@ -310,7 +310,7 @@ static void update_psa_checksum(struct net_device * dev, unsigned long ioaddr, u
 /*
  * Write 1 byte to the MMC.
  */
-static inline void mmc_out(unsigned long ioaddr, u16 o, u8 d)
+static void mmc_out(unsigned long ioaddr, u16 o, u8 d)
 {
        int count = 0;
 
@@ -326,7 +326,7 @@ static inline void mmc_out(unsigned long ioaddr, u16 o, u8 d)
  * Routine to write bytes to the Modem Management Controller.
  * We start at the end because it is the way it should be!
  */
-static inline void mmc_write(unsigned long ioaddr, u8 o, u8 * b, int n)
+static void mmc_write(unsigned long ioaddr, u8 o, u8 * b, int n)
 {
        o += n;
        b += n;
@@ -340,7 +340,7 @@ static inline void mmc_write(unsigned long ioaddr, u8 o, u8 * b, int n)
  * Read a byte from the MMC.
  * Optimised version for 1 byte, avoid using memory.
  */
-static inline u8 mmc_in(unsigned long ioaddr, u16 o)
+static u8 mmc_in(unsigned long ioaddr, u16 o)
 {
        int count = 0;
 
@@ -430,7 +430,6 @@ static void fee_read(unsigned long ioaddr,  /* I/O port of the card */
        }
 }
 
-#ifdef WIRELESS_EXT            /* if the wireless extension exists in the kernel */
 
 /*------------------------------------------------------------------*/
 /*
@@ -514,7 +513,6 @@ static void fee_write(unsigned long ioaddr, /* I/O port of the card */
        fee_wait(ioaddr, 10, 100);
 #endif                         /* EEPROM_IS_PROTECTED */
 }
-#endif                         /* WIRELESS_EXT */
 
 /************************ I82586 SUBROUTINES *************************/
 /*
@@ -589,7 +587,7 @@ static void wv_ack(struct net_device * dev)
  * Set channel attention bit and busy wait until command has
  * completed, then acknowledge completion of the command.
  */
-static inline int wv_synchronous_cmd(struct net_device * dev, const char *str)
+static int wv_synchronous_cmd(struct net_device * dev, const char *str)
 {
        net_local *lp = (net_local *) dev->priv;
        unsigned long ioaddr = dev->base_addr;
@@ -635,7 +633,7 @@ static inline int wv_synchronous_cmd(struct net_device * dev, const char *str)
  * Configuration commands completion interrupt.
  * Check if done, and if OK.
  */
-static inline int
+static int
 wv_config_complete(struct net_device * dev, unsigned long ioaddr, net_local * lp)
 {
        unsigned short mcs_addr;
@@ -845,7 +843,7 @@ if (lp->tx_n_in_use > 0)
  * wavelan_interrupt is not an option), so you may experience
  * delays sometimes.
  */
-static inline void wv_82586_reconfig(struct net_device * dev)
+static void wv_82586_reconfig(struct net_device * dev)
 {
        net_local *lp = (net_local *) dev->priv;
        unsigned long flags;
@@ -973,11 +971,9 @@ static void wv_mmc_show(struct net_device * dev)
        mmc_read(ioaddr, 0, (u8 *) & m, sizeof(m));
        mmc_out(ioaddr, mmwoff(0, mmw_freeze), 0);
 
-#ifdef WIRELESS_EXT            /* if wireless extension exists in the kernel */
        /* Don't forget to update statistics */
        lp->wstats.discard.nwid +=
            (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l;
-#endif                         /* WIRELESS_EXT */
 
        printk(KERN_DEBUG "##### WaveLAN modem status registers: #####\n");
 #ifdef DEBUG_SHOW_UNUSED
@@ -1285,7 +1281,7 @@ static inline void wv_packet_info(u8 * p, /* Packet to dump */
  * This is the information which is displayed by the driver at startup.
  * There are lots of flags for configuring it to your liking.
  */
-static inline void wv_init_info(struct net_device * dev)
+static void wv_init_info(struct net_device * dev)
 {
        short ioaddr = dev->base_addr;
        net_local *lp = (net_local *) dev->priv;
@@ -1499,7 +1495,6 @@ static int wavelan_set_mac_address(struct net_device * dev, void *addr)
 }
 #endif                         /* SET_MAC_ADDRESS */
 
-#ifdef WIRELESS_EXT            /* if wireless extensions exist in the kernel */
 
 /*------------------------------------------------------------------*/
 /*
@@ -1507,7 +1502,7 @@ static int wavelan_set_mac_address(struct net_device * dev, void *addr)
  * It's a bit complicated and you don't really want to look into it.
  * (called in wavelan_ioctl)
  */
-static inline int wv_set_frequency(unsigned long ioaddr,       /* I/O port of the card */
+static int wv_set_frequency(unsigned long ioaddr,      /* I/O port of the card */
                                   iw_freq * frequency)
 {
        const int BAND_NUM = 10;        /* Number of bands */
@@ -1682,7 +1677,7 @@ static inline int wv_set_frequency(unsigned long ioaddr,  /* I/O port of the card
 /*
  * Give the list of available frequencies.
  */
-static inline int wv_frequency_list(unsigned long ioaddr,      /* I/O port of the card */
+static int wv_frequency_list(unsigned long ioaddr,     /* I/O port of the card */
                                    iw_freq * list,     /* List of frequencies to fill */
                                    int max)
 {                              /* Maximum number of frequencies */
@@ -2473,7 +2468,6 @@ static iw_stats *wavelan_get_wireless_stats(struct net_device * dev)
 #endif
        return &lp->wstats;
 }
-#endif                         /* WIRELESS_EXT */
 
 /************************* PACKET RECEPTION *************************/
 /*
@@ -2495,7 +2489,7 @@ static iw_stats *wavelan_get_wireless_stats(struct net_device * dev)
  * Note: if any errors occur, the packet is "dropped on the floor".
  * (called by wv_packet_rcv())
  */
-static inline void
+static void
 wv_packet_read(struct net_device * dev, u16 buf_off, int sksize)
 {
        net_local *lp = (net_local *) dev->priv;
@@ -2591,7 +2585,7 @@ wv_packet_read(struct net_device * dev, u16 buf_off, int sksize)
  * (called in wavelan_interrupt()).
  * Note : the spinlock is already grabbed for us.
  */
-static inline void wv_receive(struct net_device * dev)
+static void wv_receive(struct net_device * dev)
 {
        unsigned long ioaddr = dev->base_addr;
        net_local *lp = (net_local *) dev->priv;
@@ -2774,7 +2768,7 @@ static inline void wv_receive(struct net_device * dev)
  *
  * (called in wavelan_packet_xmit())
  */
-static inline int wv_packet_write(struct net_device * dev, void *buf, short length)
+static int wv_packet_write(struct net_device * dev, void *buf, short length)
 {
        net_local *lp = (net_local *) dev->priv;
        unsigned long ioaddr = dev->base_addr;
@@ -2970,7 +2964,7 @@ static int wavelan_packet_xmit(struct sk_buff *skb, struct net_device * dev)
  * Routine to initialize the Modem Management Controller.
  * (called by wv_hw_reset())
  */
-static inline int wv_mmc_init(struct net_device * dev)
+static int wv_mmc_init(struct net_device * dev)
 {
        unsigned long ioaddr = dev->base_addr;
        net_local *lp = (net_local *) dev->priv;
@@ -3142,7 +3136,7 @@ static inline int wv_mmc_init(struct net_device * dev)
  * Start the receive unit.
  * (called by wv_hw_reset())
  */
-static inline int wv_ru_start(struct net_device * dev)
+static int wv_ru_start(struct net_device * dev)
 {
        net_local *lp = (net_local *) dev->priv;
        unsigned long ioaddr = dev->base_addr;
@@ -3234,7 +3228,7 @@ static inline int wv_ru_start(struct net_device * dev)
  *
  * (called by wv_hw_reset())
  */
-static inline int wv_cu_start(struct net_device * dev)
+static int wv_cu_start(struct net_device * dev)
 {
        net_local *lp = (net_local *) dev->priv;
        unsigned long ioaddr = dev->base_addr;
@@ -3335,7 +3329,7 @@ static inline int wv_cu_start(struct net_device * dev)
  *
  * (called by wv_hw_reset())
  */
-static inline int wv_82586_start(struct net_device * dev)
+static int wv_82586_start(struct net_device * dev)
 {
        net_local *lp = (net_local *) dev->priv;
        unsigned long ioaddr = dev->base_addr;
@@ -3647,7 +3641,7 @@ static void wv_82586_config(struct net_device * dev)
  * WaveLAN controller (i82586).
  * (called by wavelan_close())
  */
-static inline void wv_82586_stop(struct net_device * dev)
+static void wv_82586_stop(struct net_device * dev)
 {
        net_local *lp = (net_local *) dev->priv;
        unsigned long ioaddr = dev->base_addr;
@@ -4194,11 +4188,9 @@ static int __init wavelan_config(struct net_device *dev, unsigned short ioaddr)
        dev->set_mac_address = &wavelan_set_mac_address;
 #endif                         /* SET_MAC_ADDRESS */
 
-#ifdef WIRELESS_EXT            /* if wireless extension exists in the kernel */
        dev->wireless_handlers = &wavelan_handler_def;
        lp->wireless_data.spy_data = &lp->spy_data;
        dev->wireless_data = &lp->wireless_data;
-#endif
 
        dev->mtu = WAVELAN_MTU;
 
@@ -4314,7 +4306,7 @@ out:
  * Insertion of the module
  * I'm now quite proud of the multi-device support.
  */
-int init_module(void)
+int __init init_module(void)
 {
        int ret = -EIO;         /* Return error if no cards found */
        int i;