*/
#undef REALLY_SLOW_IO /* most systems can safely undef this */
-#include <linux/config.h>
#include <linux/delay.h>
#include <linux/types.h>
#include <linux/ethtool.h>
* release a socket, in response to card insertion and ejection events. They
* are invoked from the wl24 event handler.
*/
-static void wl3501_config(dev_link_t *link);
-static void wl3501_release(dev_link_t *link);
+static int wl3501_config(struct pcmcia_device *link);
+static void wl3501_release(struct pcmcia_device *link);
/*
* The dev_info variable is the "key" that is used to match up this
iw_set_mgmt_info_element(from->id, to, from->data, from->len);
}
-/*
- * A linked list of "instances" of the wl24 device. Each actual PCMCIA card
- * corresponds to one device instance, and is described by one dev_link_t
- * structure (defined in ds.h).
- *
- * You may not want to use a linked list for this -- for example, the memory
- * card driver uses an array of dev_link_t pointers, where minor device numbers
- * are used to derive the corresponding array index.
- */
-static dev_link_t *wl3501_dev_list;
-
static inline void wl3501_switch_page(struct wl3501_card *this, u8 page)
{
wl3501_outb(page, this->base_addr + WL3501_NIC_BSS);
* wl3501_interrupt - Hardware interrupt from card.
* @irq - Interrupt number
* @dev_id - net_device
- * @regs - registers
*
* We must acknowledge the interrupt as soon as possible, and block the
* interrupt from the same card immediately to prevent re-entry.
* On the other hand, to prevent SUTRO from malfunctioning, we must
* unlock the SUTRO as soon as possible.
*/
-static irqreturn_t wl3501_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t wl3501_interrupt(int irq, void *dev_id)
{
- struct net_device *dev = (struct net_device *)dev_id;
+ struct net_device *dev = dev_id;
struct wl3501_card *this;
- int handled = 1;
- if (!dev)
- goto unknown;
- this = dev->priv;
+ this = netdev_priv(dev);
spin_lock(&this->lock);
wl3501_ack_interrupt(this);
wl3501_block_interrupt(this);
wl3501_rx_interrupt(dev);
wl3501_unblock_interrupt(this);
spin_unlock(&this->lock);
-out:
- return IRQ_RETVAL(handled);
-unknown:
- handled = 0;
- printk(KERN_ERR "%s: irq %d for unknown device.\n", __FUNCTION__, irq);
- goto out;
+
+ return IRQ_HANDLED;
}
static int wl3501_reset_board(struct wl3501_card *this)
struct wl3501_card *this = dev->priv;
int rc = -ENODEV;
unsigned long flags;
- dev_link_t *link;
+ struct pcmcia_device *link;
+ link = this->p_dev;
spin_lock_irqsave(&this->lock, flags);
- /* Check if the device is in wl3501_dev_list */
- for (link = wl3501_dev_list; link; link = link->next)
- if (link->priv == dev)
- break;
- if (!link)
- goto out;
link->open--;
/* Stop wl3501_hard_start_xmit() from now on */
rc = 0;
printk(KERN_INFO "%s: WL3501 closed\n", dev->name);
-out:
spin_unlock_irqrestore(&this->lock, flags);
return rc;
}
int rc = -ENODEV;
struct wl3501_card *this = dev->priv;
unsigned long flags;
- dev_link_t *link;
+ struct pcmcia_device *link;
+ link = this->p_dev;
spin_lock_irqsave(&this->lock, flags);
- /* Check if the device is in wl3501_dev_list */
- for (link = wl3501_dev_list; link; link = link->next)
- if (link->priv == dev)
- break;
- if (!DEV_OK(link))
+ if (!pcmcia_dev_present(link))
goto out;
netif_device_attach(dev);
link->open++;
strlcpy(info->driver, wl3501_dev_info, sizeof(info->driver));
}
-static struct ethtool_ops ops = {
+static const struct ethtool_ops ops = {
.get_drvinfo = wl3501_get_drvinfo
};
* Services. If it has been released, all local data structures are freed.
* Otherwise, the structures will be freed when the device is released.
*/
-static void wl3501_detach(struct pcmcia_device *p_dev)
+static void wl3501_detach(struct pcmcia_device *link)
{
- dev_link_t *link = dev_to_instance(p_dev);
- dev_link_t **linkp;
struct net_device *dev = link->priv;
- /* Locate device structure */
- for (linkp = &wl3501_dev_list; *linkp; linkp = &(*linkp)->next)
- if (*linkp == link)
- break;
- if (!*linkp)
- goto out;
-
/* If the device is currently configured and active, we won't actually
* delete it yet. Instead, it is marked so that when the release()
* function is called, that will trigger a proper detach(). */
- if (link->state & DEV_CONFIG) {
- while (link->open > 0)
- wl3501_close(dev);
-
- netif_device_detach(dev);
- wl3501_release(link);
- }
+ while (link->open > 0)
+ wl3501_close(dev);
- /* Unlink device structure, free pieces */
- *linkp = link->next;
+ netif_device_detach(dev);
+ wl3501_release(link);
if (link->priv)
free_netdev(link->priv);
- kfree(link);
-out:
+
return;
}
&retry, sizeof(retry));
if (rc)
goto out;
- if (wrqu->retry.flags & IW_RETRY_MAX) {
- wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_MAX;
+ if (wrqu->retry.flags & IW_RETRY_LONG) {
+ wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_LONG;
goto set_value;
}
rc = wl3501_get_mib_value(this, WL3501_MIB_ATTR_SHORT_RETRY_LIMIT,
&retry, sizeof(retry));
if (rc)
goto out;
- wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_MIN;
+ wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_SHORT;
set_value:
wrqu->retry.value = retry;
wrqu->retry.disabled = 0;
* The dev_link structure is initialized, but we don't actually configure the
* card at this point -- we wait until we receive a card insertion event.
*/
-static int wl3501_attach(struct pcmcia_device *p_dev)
+static int wl3501_probe(struct pcmcia_device *p_dev)
{
- dev_link_t *link;
struct net_device *dev;
struct wl3501_card *this;
- /* Initialize the dev_link_t structure */
- link = kzalloc(sizeof(*link), GFP_KERNEL);
- if (!link)
- return -ENOMEM;
-
/* The io structure describes IO port mapping */
- link->io.NumPorts1 = 16;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines = 5;
+ p_dev->io.NumPorts1 = 16;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.IOAddrLines = 5;
/* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
- link->irq.IRQInfo1 = IRQ_LEVEL_ID;
- link->irq.Handler = wl3501_interrupt;
+ p_dev->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+ p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
+ p_dev->irq.Handler = wl3501_interrupt;
/* General socket configuration */
- link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.Vcc = 50;
- link->conf.IntType = INT_MEMORY_AND_IO;
- link->conf.ConfigIndex = 1;
- link->conf.Present = PRESENT_OPTION;
+ p_dev->conf.Attributes = CONF_ENABLE_IRQ;
+ p_dev->conf.IntType = INT_MEMORY_AND_IO;
+ p_dev->conf.ConfigIndex = 1;
dev = alloc_etherdev(sizeof(struct wl3501_card));
if (!dev)
dev->get_stats = wl3501_get_stats;
this = dev->priv;
this->wireless_data.spy_data = &this->spy_data;
+ this->p_dev = p_dev;
dev->wireless_data = &this->wireless_data;
dev->wireless_handlers = (struct iw_handler_def *)&wl3501_handler_def;
SET_ETHTOOL_OPS(dev, &ops);
netif_stop_queue(dev);
- link->priv = link->irq.Instance = dev;
-
- link->handle = p_dev;
- p_dev->instance = link;
+ p_dev->priv = p_dev->irq.Instance = dev;
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- wl3501_config(link);
-
- return 0;
+ return wl3501_config(p_dev);
out_link:
- kfree(link);
- link = NULL;
return -ENOMEM;
}
* received, to configure the PCMCIA socket, and to make the ethernet device
* available to the system.
*/
-static void wl3501_config(dev_link_t *link)
+static int wl3501_config(struct pcmcia_device *link)
{
- tuple_t tuple;
- cisparse_t parse;
- client_handle_t handle = link->handle;
struct net_device *dev = link->priv;
int i = 0, j, last_fn, last_ret;
- unsigned char bf[64];
struct wl3501_card *this;
- /* This reads the card's CONFIG tuple to find its config registers. */
- tuple.Attributes = 0;
- tuple.DesiredTuple = CISTPL_CONFIG;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
- tuple.TupleData = bf;
- tuple.TupleDataMax = sizeof(bf);
- tuple.TupleOffset = 0;
- CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
- CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
- link->conf.ConfigBase = parse.config.base;
- link->conf.Present = parse.config.rmask[0];
-
- /* Configure card */
- link->state |= DEV_CONFIG;
-
/* Try allocating IO ports. This tries a few fixed addresses. If you
* want, you can also read the card's config table to pick addresses --
* see the serial driver for an example. */
* 0x200-0x2ff, and so on, because this seems safer */
link->io.BasePort1 = j;
link->io.BasePort2 = link->io.BasePort1 + 0x10;
- i = pcmcia_request_io(link->handle, &link->io);
+ i = pcmcia_request_io(link, &link->io);
if (i == CS_SUCCESS)
break;
}
if (i != CS_SUCCESS) {
- cs_error(link->handle, RequestIO, i);
+ cs_error(link, RequestIO, i);
goto failed;
}
/* Now allocate an interrupt line. Note that this does not actually
* assign a handler to the interrupt. */
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq));
+ CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
/* This actually configures the PCMCIA socket -- setting up the I/O
* windows and the interrupt mapping. */
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link->handle, &link->conf));
+ CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
- SET_NETDEV_DEV(dev, &handle_to_dev(handle));
+ SET_NETDEV_DEV(dev, &handle_to_dev(link));
if (register_netdev(dev)) {
printk(KERN_NOTICE "wl3501_cs: register_netdev() failed\n");
goto failed;
this = dev->priv;
/*
* At this point, the dev_node_t structure(s) should be initialized and
- * arranged in a linked list at link->dev.
+ * arranged in a linked list at link->dev_node.
*/
- link->dev = &this->node;
- link->state &= ~DEV_CONFIG_PENDING;
+ link->dev_node = &this->node;
this->base_addr = dev->base_addr;
spin_lock_init(&this->lock);
init_waitqueue_head(&this->wait);
netif_start_queue(dev);
- goto out;
+ return 0;
+
cs_failed:
- cs_error(link->handle, last_fn, last_ret);
+ cs_error(link, last_fn, last_ret);
failed:
wl3501_release(link);
-out:
- return;
+ return -ENODEV;
}
/**
* and release the PCMCIA configuration. If the device is still open, this
* will be postponed until it is closed.
*/
-static void wl3501_release(dev_link_t *link)
+static void wl3501_release(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
/* Unlink the device chain */
- if (link->dev) {
+ if (link->dev_node)
unregister_netdev(dev);
- link->dev = NULL;
- }
- /* Don't bother checking to see if these succeed or not */
- pcmcia_release_configuration(link->handle);
- pcmcia_release_io(link->handle, &link->io);
- pcmcia_release_irq(link->handle, &link->irq);
- link->state &= ~DEV_CONFIG;
+ pcmcia_disable_device(link);
}
-static int wl3501_suspend(struct pcmcia_device *p_dev)
+static int wl3501_suspend(struct pcmcia_device *link)
{
- dev_link_t *link = dev_to_instance(p_dev);
struct net_device *dev = link->priv;
- link->state |= DEV_SUSPEND;
-
wl3501_pwr_mgmt(dev->priv, WL3501_SUSPEND);
- if (link->state & DEV_CONFIG) {
- if (link->open)
- netif_device_detach(dev);
- pcmcia_release_configuration(link->handle);
- }
+ if (link->open)
+ netif_device_detach(dev);
return 0;
}
-static int wl3501_resume(struct pcmcia_device *p_dev)
+static int wl3501_resume(struct pcmcia_device *link)
{
- dev_link_t *link = dev_to_instance(p_dev);
struct net_device *dev = link->priv;
wl3501_pwr_mgmt(dev->priv, WL3501_RESUME);
- if (link->state & DEV_CONFIG) {
- pcmcia_request_configuration(link->handle, &link->conf);
- if (link->open) {
- wl3501_reset(dev);
- netif_device_attach(dev);
- }
+ if (link->open) {
+ wl3501_reset(dev);
+ netif_device_attach(dev);
}
return 0;
.drv = {
.name = "wl3501_cs",
},
- .probe = wl3501_attach,
+ .probe = wl3501_probe,
.remove = wl3501_detach,
.id_table = wl3501_ids,
.suspend = wl3501_suspend,
static void __exit wl3501_exit_module(void)
{
- dprintk(0, ": unloading");
pcmcia_unregister_driver(&wl3501_driver);
- BUG_ON(wl3501_dev_list != NULL);
}
module_init(wl3501_init_module);
git://git.onelab.eu / linux-2.6.git / blobdiff