*/
#include <asm/unaligned.h>
+#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/errno.h>
#include <linux/skbuff.h>
#include <linux/usb.h>
+#include <linux/workqueue.h>
#include <net/ieee80211.h>
#include "zd_def.h"
{ USB_DEVICE(0x6891, 0xa727), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x0df6, 0x9071), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x157e, 0x300b), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x079b, 0x004a), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x1740, 0x2000), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x157e, 0x3204), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x0586, 0x3402), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x0b3b, 0x5630), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x0b05, 0x170c), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x1435, 0x0711), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x0586, 0x3409), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x0b3b, 0x1630), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x0586, 0x3401), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x14ea, 0xab13), .driver_info = DEVICE_ZD1211 },
/* ZD1211B */
{ USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x079b, 0x0062), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x1582, 0x6003), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x050d, 0x705c), .driver_info = DEVICE_ZD1211B },
+ /* "Driverless" devices that need ejecting */
+ { USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER },
{}
};
return buffer;
}
+static int handle_version_mismatch(struct usb_device *udev, u8 device_type,
+ const struct firmware *ub_fw)
+{
+ const struct firmware *ur_fw = NULL;
+ int offset;
+ int r = 0;
+ char fw_name[128];
+
+ r = request_fw_file(&ur_fw,
+ get_fw_name(fw_name, sizeof(fw_name), device_type, "ur"),
+ &udev->dev);
+ if (r)
+ goto error;
+
+ r = upload_code(udev, ur_fw->data, ur_fw->size, FW_START_OFFSET,
+ REBOOT);
+ if (r)
+ goto error;
+
+ offset = ((EEPROM_REGS_OFFSET + EEPROM_REGS_SIZE) * sizeof(u16));
+ r = upload_code(udev, ub_fw->data + offset, ub_fw->size - offset,
+ E2P_BASE_OFFSET + EEPROM_REGS_SIZE, REBOOT);
+
+ /* At this point, the vendor driver downloads the whole firmware
+ * image, hacks around with version IDs, and uploads it again,
+ * completely overwriting the boot code. We do not do this here as
+ * it is not required on any tested devices, and it is suspected to
+ * cause problems. */
+error:
+ release_firmware(ur_fw);
+ return r;
+}
+
static int upload_firmware(struct usb_device *udev, u8 device_type)
{
int r;
fw_bcdDevice = get_word(ub_fw->data, EEPROM_REGS_OFFSET);
- /* FIXME: do we have any reason to perform the kludge that the vendor
- * driver does when there is a version mismatch? (their driver uploads
- * different firmwares and stuff)
- */
if (fw_bcdDevice != bcdDevice) {
dev_info(&udev->dev,
- "firmware device id %#06x and actual device id "
- "%#06x differ, continuing anyway\n",
- fw_bcdDevice, bcdDevice);
+ "firmware version %#06x and device bootcode version "
+ "%#06x differ\n", fw_bcdDevice, bcdDevice);
+ if (bcdDevice <= 0x4313)
+ dev_warn(&udev->dev, "device has old bootcode, please "
+ "report success or failure\n");
+
+ r = handle_version_mismatch(udev, device_type, ub_fw);
+ if (r)
+ goto error;
} else {
dev_dbg_f(&udev->dev,
"firmware device id %#06x is equal to the "
return r;
}
-static void disable_read_regs_int(struct zd_usb *usb)
-{
- struct zd_usb_interrupt *intr = &usb->intr;
-
- spin_lock(&intr->lock);
- intr->read_regs_enabled = 0;
- spin_unlock(&intr->lock);
-}
-
#define urb_dev(urb) (&(urb)->dev->dev)
static inline void handle_regs_int(struct urb *urb)
}
-static void int_urb_complete(struct urb *urb, struct pt_regs *pt_regs)
+static void int_urb_complete(struct urb *urb)
{
int r;
struct usb_int_header *hdr;
unsigned int l, k, n;
for (i = 0, l = 0;; i++) {
k = le16_to_cpu(get_unaligned(&length_info->length[i]));
+ if (k == 0)
+ return;
n = l+k;
if (n > length)
return;
- zd_mac_rx(mac, buffer+l, k);
+ zd_mac_rx_irq(mac, buffer+l, k);
if (i >= 2)
return;
l = (n+3) & ~3;
}
} else {
- zd_mac_rx(mac, buffer, length);
+ zd_mac_rx_irq(mac, buffer, length);
}
}
-static void rx_urb_complete(struct urb *urb, struct pt_regs *pt_regs)
+static void rx_urb_complete(struct urb *urb)
{
struct zd_usb *usb;
struct zd_usb_rx *rx;
usb_submit_urb(urb, GFP_ATOMIC);
}
-struct urb *alloc_urb(struct zd_usb *usb)
+static struct urb *alloc_urb(struct zd_usb *usb)
{
struct usb_device *udev = zd_usb_to_usbdev(usb);
struct urb *urb;
return urb;
}
-void free_urb(struct urb *urb)
+static void free_urb(struct urb *urb)
{
if (!urb)
return;
spin_unlock_irqrestore(&rx->lock, flags);
}
-static void tx_urb_complete(struct urb *urb, struct pt_regs *pt_regs)
+static void tx_urb_complete(struct urb *urb)
{
int r;
{
usb_set_intfdata(usb->intf, NULL);
usb_put_intf(usb->intf);
- memset(usb, 0, sizeof(*usb));
+ ZD_MEMCLEAR(usb, sizeof(*usb));
/* FIXME: usb_interrupt, usb_tx, usb_rx? */
}
#define print_id(udev) do { } while (0)
#endif
+static int eject_installer(struct usb_interface *intf)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct usb_host_interface *iface_desc = &intf->altsetting[0];
+ struct usb_endpoint_descriptor *endpoint;
+ unsigned char *cmd;
+ u8 bulk_out_ep;
+ int r;
+
+ /* Find bulk out endpoint */
+ endpoint = &iface_desc->endpoint[1].desc;
+ if ((endpoint->bEndpointAddress & USB_TYPE_MASK) == USB_DIR_OUT &&
+ (endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_BULK) {
+ bulk_out_ep = endpoint->bEndpointAddress;
+ } else {
+ dev_err(&udev->dev,
+ "zd1211rw: Could not find bulk out endpoint\n");
+ return -ENODEV;
+ }
+
+ cmd = kzalloc(31, GFP_KERNEL);
+ if (cmd == NULL)
+ return -ENODEV;
+
+ /* USB bulk command block */
+ cmd[0] = 0x55; /* bulk command signature */
+ cmd[1] = 0x53; /* bulk command signature */
+ cmd[2] = 0x42; /* bulk command signature */
+ cmd[3] = 0x43; /* bulk command signature */
+ cmd[14] = 6; /* command length */
+
+ cmd[15] = 0x1b; /* SCSI command: START STOP UNIT */
+ cmd[19] = 0x2; /* eject disc */
+
+ dev_info(&udev->dev, "Ejecting virtual installer media...\n");
+ r = usb_bulk_msg(udev, usb_sndbulkpipe(udev, bulk_out_ep),
+ cmd, 31, NULL, 2000);
+ kfree(cmd);
+ if (r)
+ return r;
+
+ /* At this point, the device disconnects and reconnects with the real
+ * ID numbers. */
+
+ usb_set_intfdata(intf, NULL);
+ return 0;
+}
+
static int probe(struct usb_interface *intf, const struct usb_device_id *id)
{
int r;
print_id(udev);
+ if (id->driver_info & DEVICE_INSTALLER)
+ return eject_installer(intf);
+
switch (udev->speed) {
case USB_SPEED_LOW:
case USB_SPEED_FULL:
struct zd_mac *mac = zd_netdev_mac(netdev);
struct zd_usb *usb = &mac->chip.usb;
+ /* Either something really bad happened, or we're just dealing with
+ * a DEVICE_INSTALLER. */
+ if (netdev == NULL)
+ return;
+
dev_dbg_f(zd_usb_dev(usb), "\n");
zd_netdev_disconnect(netdev);
*/
usb_reset_device(interface_to_usbdev(intf));
- /* If somebody still waits on this lock now, this is an error. */
zd_netdev_free(netdev);
dev_dbg(&intf->dev, "disconnected\n");
}
.disconnect = disconnect,
};
+struct workqueue_struct *zd_workqueue;
+
static int __init usb_init(void)
{
int r;
- pr_debug("usb_init()\n");
+ pr_debug("%s usb_init()\n", driver.name);
+
+ zd_workqueue = create_singlethread_workqueue(driver.name);
+ if (zd_workqueue == NULL) {
+ printk(KERN_ERR "%s couldn't create workqueue\n", driver.name);
+ return -ENOMEM;
+ }
r = usb_register(&driver);
if (r) {
- printk(KERN_ERR "usb_register() failed. Error number %d\n", r);
+ printk(KERN_ERR "%s usb_register() failed. Error number %d\n",
+ driver.name, r);
return r;
}
- pr_debug("zd1211rw initialized\n");
+ pr_debug("%s initialized\n", driver.name);
return 0;
}
static void __exit usb_exit(void)
{
- pr_debug("usb_exit()\n");
+ pr_debug("%s usb_exit()\n", driver.name);
usb_deregister(&driver);
+ destroy_workqueue(zd_workqueue);
}
module_init(usb_init);
{
struct zd_usb_interrupt *intr = &usb->intr;
- spin_lock(&intr->lock);
+ spin_lock_irq(&intr->lock);
intr->read_regs_enabled = 1;
INIT_COMPLETION(intr->read_regs.completion);
- spin_unlock(&intr->lock);
+ spin_unlock_irq(&intr->lock);
+}
+
+static void disable_read_regs_int(struct zd_usb *usb)
+{
+ struct zd_usb_interrupt *intr = &usb->intr;
+
+ spin_lock_irq(&intr->lock);
+ intr->read_regs_enabled = 0;
+ spin_unlock_irq(&intr->lock);
}
static int get_results(struct zd_usb *usb, u16 *values,
struct read_regs_int *rr = &intr->read_regs;
struct usb_int_regs *regs = (struct usb_int_regs *)rr->buffer;
- spin_lock(&intr->lock);
+ spin_lock_irq(&intr->lock);
r = -EIO;
/* The created block size seems to be larger than expected.
r = 0;
error_unlock:
- spin_unlock(&intr->lock);
+ spin_unlock_irq(&intr->lock);
return r;
}
git://git.onelab.eu / linux-2.6.git / blobdiff