fedora core 6 1.2949 + vserver 2.2.0

[linux-2.6.git] / drivers / parisc / superio.c

diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index ba971fe..1fd97f7 100644 (file)
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -12,6 +12,7 @@
  *      (C) Copyright 2001 John Marvin <jsm fc hp com>
  *      (C) Copyright 2003 Grant Grundler <grundler parisc-linux org>
  *     (C) Copyright 2005 Kyle McMartin <kyle@parisc-linux.org>
+ *     (C) Copyright 2006 Helge Deller <deller@gmx.de>
  *
  *     This program is free software; you can redistribute it and/or
  *     modify it under the terms of the GNU General Public License as
@@ -93,7 +94,7 @@ static struct superio_device sio_dev;
 #define PFX    SUPERIO ": "
 
 static irqreturn_t
-superio_interrupt(int parent_irq, void *devp, struct pt_regs *regs)
+superio_interrupt(int parent_irq, void *devp)
 {
        u8 results;
        u8 local_irq;
@@ -137,7 +138,7 @@ superio_interrupt(int parent_irq, void *devp, struct pt_regs *regs)
        }
 
        /* Call the appropriate device's interrupt */
-       __do_IRQ(local_irq, regs);
+       __do_IRQ(local_irq);
 
        /* set EOI - forces a new interrupt if a lower priority device
         * still needs service.
@@ -154,11 +155,11 @@ superio_init(struct pci_dev *pcidev)
        struct pci_dev *pdev = sio->lio_pdev;
        u16 word;
 
-        if (sio->suckyio_irq_enabled)                                       
+       if (sio->suckyio_irq_enabled)
                return;
 
-       if (!pdev) BUG();
-       if (!sio->usb_pdev) BUG();
+       BUG_ON(!pdev);
+       BUG_ON(!sio->usb_pdev);
 
        /* use the IRQ iosapic found for USB INT D... */
        pdev->irq = sio->usb_pdev->irq;
@@ -193,7 +194,7 @@ superio_init(struct pci_dev *pcidev)
        request_region (sio->acpi_base, 0x1f, "acpi");
 
        /* Enable the legacy I/O function */
-        pci_read_config_word (pdev, PCI_COMMAND, &word);
+       pci_read_config_word (pdev, PCI_COMMAND, &word);
        word |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_IO;
        pci_write_config_word (pdev, PCI_COMMAND, word);
 
@@ -270,7 +271,7 @@ superio_init(struct pci_dev *pcidev)
        else
                printk(KERN_ERR PFX "USB regulator not initialized!\n");
 
-       if (request_irq(pdev->irq, superio_interrupt, SA_INTERRUPT,
+       if (request_irq(pdev->irq, superio_interrupt, IRQF_DISABLED,
                        SUPERIO, (void *)sio)) {
 
                printk(KERN_ERR PFX "could not get irq\n");
@@ -359,7 +360,7 @@ int superio_fixup_irq(struct pci_dev *pcidev)
 #endif
 
        for (i = 0; i < 16; i++) {
-               irq_desc[i].handler = &superio_interrupt_type;
+               irq_desc[i].chip = &superio_interrupt_type;
        }
 
        /*
@@ -388,43 +389,34 @@ int superio_fixup_irq(struct pci_dev *pcidev)
        return local_irq;
 }
 
-static struct uart_port serial[] = {
-       {
-               .iotype         = UPIO_PORT,
-               .line           = 0,
-               .type           = PORT_16550A,
-               .uartclk        = 115200*16,
-               .fifosize       = 16,
-       },
-       {
-               .iotype         = UPIO_PORT,
-               .line           = 1,
-               .type           = PORT_16550A,
-               .uartclk        = 115200*16,
-               .fifosize       = 16,
-       }
-};
-
 static void __devinit superio_serial_init(void)
 {
 #ifdef CONFIG_SERIAL_8250
        int retval;
-        
-       serial[0].iobase = sio_dev.sp1_base;
-       serial[0].irq = SP1_IRQ;
-       spin_lock_init(&serial[0].lock);
-
-       retval = early_serial_setup(&serial[0]);
+       struct uart_port serial_port;
+
+       memset(&serial_port, 0, sizeof(serial_port));
+       serial_port.iotype      = UPIO_PORT;
+       serial_port.type        = PORT_16550A;
+       serial_port.uartclk     = 115200*16;
+       serial_port.fifosize    = 16;
+       spin_lock_init(&serial_port.lock);
+
+       /* serial port #1 */
+       serial_port.iobase      = sio_dev.sp1_base;
+       serial_port.irq         = SP1_IRQ;
+       serial_port.line        = 0;
+       retval = early_serial_setup(&serial_port);
        if (retval < 0) {
                printk(KERN_WARNING PFX "Register Serial #0 failed.\n");
                return;
        }
 
-       serial[1].iobase = sio_dev.sp2_base;
-       serial[1].irq = SP2_IRQ;
-       spin_lock_init(&serial[1].lock);
-       retval = early_serial_setup(&serial[1]);
-
+       /* serial port #2 */
+       serial_port.iobase      = sio_dev.sp2_base;
+       serial_port.irq         = SP2_IRQ;
+       serial_port.line        = 1;
+       retval = early_serial_setup(&serial_port);
        if (retval < 0)
                printk(KERN_WARNING PFX "Register Serial #1 failed.\n");
 #endif /* CONFIG_SERIAL_8250 */
@@ -474,8 +466,7 @@ superio_probe(struct pci_dev *dev, const struct pci_device_id *id)
                dev->subsystem_vendor, dev->subsystem_device,
                dev->class);
 
-       if (!sio->suckyio_irq_enabled)
-               BUG(); /* Enabled by PCI_FIXUP_FINAL */
+       BUG_ON(!sio->suckyio_irq_enabled);      /* Enabled by PCI_FIXUP_FINAL */
 
        if (dev->device == PCI_DEVICE_ID_NS_87560_LIO) {        /* Function 1 */
                superio_parport_init();