#ifndef MSI_H
#define MSI_H
+/*
+ * MSI operation vector. Used by the msi core code (drivers/pci/msi.c)
+ * to abstract platform-specific tasks relating to MSI address generation
+ * and resource management.
+ */
+struct msi_ops {
+ /**
+ * setup - generate an MSI bus address and data for a given vector
+ * @pdev: PCI device context (in)
+ * @vector: vector allocated by the msi core (in)
+ * @addr_hi: upper 32 bits of PCI bus MSI address (out)
+ * @addr_lo: lower 32 bits of PCI bus MSI address (out)
+ * @data: MSI data payload (out)
+ *
+ * Description: The setup op is used to generate a PCI bus addres and
+ * data which the msi core will program into the card MSI capability
+ * registers. The setup routine is responsible for picking an initial
+ * cpu to target the MSI at. The setup routine is responsible for
+ * examining pdev to determine the MSI capabilities of the card and
+ * generating a suitable address/data. The setup routine is
+ * responsible for allocating and tracking any system resources it
+ * needs to route the MSI to the cpu it picks, and for associating
+ * those resources with the passed in vector.
+ *
+ * Returns 0 if the MSI address/data was successfully setup.
+ **/
+
+ int (*setup) (struct pci_dev *pdev, unsigned int vector,
+ u32 *addr_hi, u32 *addr_lo, u32 *data);
+
+ /**
+ * teardown - release resources allocated by setup
+ * @vector: vector context for resources (in)
+ *
+ * Description: The teardown op is used to release any resources
+ * that were allocated in the setup routine associated with the passed
+ * in vector.
+ **/
+
+ void (*teardown) (unsigned int vector);
+
+ /**
+ * target - retarget an MSI at a different cpu
+ * @vector: vector context for resources (in)
+ * @cpu: new cpu to direct vector at (in)
+ * @addr_hi: new value of PCI bus upper 32 bits (in/out)
+ * @addr_lo: new value of PCI bus lower 32 bits (in/out)
+ *
+ * Description: The target op is used to redirect an MSI vector
+ * at a different cpu. addr_hi/addr_lo coming in are the existing
+ * values that the MSI core has programmed into the card. The
+ * target code is responsible for freeing any resources (if any)
+ * associated with the old address, and generating a new PCI bus
+ * addr_hi/addr_lo that will redirect the vector at the indicated cpu.
+ **/
+
+ void (*target) (unsigned int vector, unsigned int cpu,
+ u32 *addr_hi, u32 *addr_lo);
+};
+
+extern int msi_register(struct msi_ops *ops);
+
#include <asm/msi.h>
/*
#define msix_mask(address) (address | PCI_MSIX_FLAGS_BITMASK)
#define msix_is_pending(address) (address & PCI_MSIX_FLAGS_PENDMASK)
-/*
- * MSI Defined Data Structures
- */
-#define MSI_ADDRESS_HEADER 0xfee
-#define MSI_ADDRESS_HEADER_SHIFT 12
-#define MSI_ADDRESS_HEADER_MASK 0xfff000
-#define MSI_ADDRESS_DEST_ID_MASK 0xfff0000f
-#define MSI_TARGET_CPU_MASK 0xff
-#define MSI_DELIVERY_MODE 0
-#define MSI_LEVEL_MODE 1 /* Edge always assert */
-#define MSI_TRIGGER_MODE 0 /* MSI is edge sensitive */
-#define MSI_PHYSICAL_MODE 0
-#define MSI_LOGICAL_MODE 1
-#define MSI_REDIRECTION_HINT_MODE 0
-
-struct msg_data {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- __u32 vector : 8;
- __u32 delivery_mode : 3; /* 000b: FIXED | 001b: lowest prior */
- __u32 reserved_1 : 3;
- __u32 level : 1; /* 0: deassert | 1: assert */
- __u32 trigger : 1; /* 0: edge | 1: level */
- __u32 reserved_2 : 16;
-#elif defined(__BIG_ENDIAN_BITFIELD)
- __u32 reserved_2 : 16;
- __u32 trigger : 1; /* 0: edge | 1: level */
- __u32 level : 1; /* 0: deassert | 1: assert */
- __u32 reserved_1 : 3;
- __u32 delivery_mode : 3; /* 000b: FIXED | 001b: lowest prior */
- __u32 vector : 8;
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
-} __attribute__ ((packed));
-
-struct msg_address {
- union {
- struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- __u32 reserved_1 : 2;
- __u32 dest_mode : 1; /*0:physic | 1:logic */
- __u32 redirection_hint: 1; /*0: dedicated CPU
- 1: lowest priority */
- __u32 reserved_2 : 4;
- __u32 dest_id : 24; /* Destination ID */
-#elif defined(__BIG_ENDIAN_BITFIELD)
- __u32 dest_id : 24; /* Destination ID */
- __u32 reserved_2 : 4;
- __u32 redirection_hint: 1; /*0: dedicated CPU
- 1: lowest priority */
- __u32 dest_mode : 1; /*0:physic | 1:logic */
- __u32 reserved_1 : 2;
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
- }u;
- __u32 value;
- }lo_address;
- __u32 hi_address;
-} __attribute__ ((packed));
-
struct msi_desc {
struct {
__u8 type : 5; /* {0: unused, 5h:MSI, 11h:MSI-X} */
__u8 reserved: 1; /* reserved */
__u8 entry_nr; /* specific enabled entry */
__u8 default_vector; /* default pre-assigned vector */
- __u8 current_cpu; /* current destination cpu */
+ __u8 unused; /* formerly unused destination cpu*/
}msi_attrib;
struct {
void __iomem *mask_base;
struct pci_dev *dev;
+
+#ifdef CONFIG_PM
+ /* PM save area for MSIX address/data */
+
+ u32 address_hi_save;
+ u32 address_lo_save;
+ u32 data_save;
+#endif
};
#endif /* MSI_H */
git://git.onelab.eu / linux-2.6.git / blobdiff