#include <linux/pci.h>
#include <linux/module.h>
#include <linux/spinlock.h>
+#include <linux/string.h>
#include <asm/dma.h> /* isa_dma_bridge_buggy */
#include "pci.h"
struct list_head *tmp;
unsigned char max, n;
- max = bus->number;
+ max = bus->subordinate;
list_for_each(tmp, &bus->children) {
n = pci_bus_max_busnr(pci_bus_b(tmp));
if(n > max)
}
return max;
}
+EXPORT_SYMBOL_GPL(pci_bus_max_busnr);
+#if 0
/**
* pci_max_busnr - returns maximum PCI bus number
*
return max;
}
+#endif /* 0 */
+
+static int __pci_find_next_cap(struct pci_bus *bus, unsigned int devfn, u8 pos, int cap)
+{
+ u8 id;
+ int ttl = 48;
+
+ while (ttl--) {
+ pci_bus_read_config_byte(bus, devfn, pos, &pos);
+ if (pos < 0x40)
+ break;
+ pos &= ~3;
+ pci_bus_read_config_byte(bus, devfn, pos + PCI_CAP_LIST_ID,
+ &id);
+ if (id == 0xff)
+ break;
+ if (id == cap)
+ return pos;
+ pos += PCI_CAP_LIST_NEXT;
+ }
+ return 0;
+}
+
+int pci_find_next_capability(struct pci_dev *dev, u8 pos, int cap)
+{
+ return __pci_find_next_cap(dev->bus, dev->devfn,
+ pos + PCI_CAP_LIST_NEXT, cap);
+}
+EXPORT_SYMBOL_GPL(pci_find_next_capability);
+
static int __pci_bus_find_cap(struct pci_bus *bus, unsigned int devfn, u8 hdr_type, int cap)
{
u16 status;
- u8 pos, id;
- int ttl = 48;
+ u8 pos;
pci_bus_read_config_word(bus, devfn, PCI_STATUS, &status);
if (!(status & PCI_STATUS_CAP_LIST))
switch (hdr_type) {
case PCI_HEADER_TYPE_NORMAL:
case PCI_HEADER_TYPE_BRIDGE:
- pci_bus_read_config_byte(bus, devfn, PCI_CAPABILITY_LIST, &pos);
+ pos = PCI_CAPABILITY_LIST;
break;
case PCI_HEADER_TYPE_CARDBUS:
- pci_bus_read_config_byte(bus, devfn, PCI_CB_CAPABILITY_LIST, &pos);
+ pos = PCI_CB_CAPABILITY_LIST;
break;
default:
return 0;
}
- while (ttl-- && pos >= 0x40) {
- pos &= ~3;
- pci_bus_read_config_byte(bus, devfn, pos + PCI_CAP_LIST_ID, &id);
- if (id == 0xff)
- break;
- if (id == cap)
- return pos;
- pci_bus_read_config_byte(bus, devfn, pos + PCI_CAP_LIST_NEXT, &pos);
- }
- return 0;
+ return __pci_find_next_cap(bus, devfn, pos, cap);
}
/**
return __pci_bus_find_cap(bus, devfn, hdr_type & 0x7f, cap);
}
+#if 0
/**
* pci_find_ext_capability - Find an extended capability
* @dev: PCI device to query
return 0;
}
+#endif /* 0 */
/**
* pci_find_parent_resource - return resource region of parent bus of given region
return best;
}
+/**
+ * pci_restore_bars - restore a devices BAR values (e.g. after wake-up)
+ * @dev: PCI device to have its BARs restored
+ *
+ * Restore the BAR values for a given device, so as to make it
+ * accessible by its driver.
+ */
+void
+pci_restore_bars(struct pci_dev *dev)
+{
+ int i, numres;
+
+ switch (dev->hdr_type) {
+ case PCI_HEADER_TYPE_NORMAL:
+ numres = 6;
+ break;
+ case PCI_HEADER_TYPE_BRIDGE:
+ numres = 2;
+ break;
+ case PCI_HEADER_TYPE_CARDBUS:
+ numres = 1;
+ break;
+ default:
+ /* Should never get here, but just in case... */
+ return;
+ }
+
+ for (i = 0; i < numres; i ++)
+ pci_update_resource(dev, &dev->resource[i], i);
+}
+
+int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t t);
+
/**
* pci_set_power_state - Set the power state of a PCI device
* @dev: PCI device to be suspended
* -EIO if device does not support PCI PM.
* 0 if we can successfully change the power state.
*/
-
int
pci_set_power_state(struct pci_dev *dev, pci_power_t state)
{
- int pm;
+ int pm, need_restore = 0;
u16 pmcsr, pmc;
/* bound the state we're entering */
* Can enter D0 from any state, but if we can only go deeper
* to sleep if we're already in a low power state
*/
- if (state != PCI_D0 && dev->current_state > state)
+ if (state != PCI_D0 && dev->current_state > state) {
+ printk(KERN_ERR "%s(): %s: state=%d, current state=%d\n",
+ __FUNCTION__, pci_name(dev), state, dev->current_state);
return -EINVAL;
- else if (dev->current_state == state)
+ } else if (dev->current_state == state)
return 0; /* we're already there */
/* find PCI PM capability in list */
return -EIO;
pci_read_config_word(dev,pm + PCI_PM_PMC,&pmc);
- if ((pmc & PCI_PM_CAP_VER_MASK) > 2) {
+ if ((pmc & PCI_PM_CAP_VER_MASK) > 3) {
printk(KERN_DEBUG
"PCI: %s has unsupported PM cap regs version (%u)\n",
pci_name(dev), pmc & PCI_PM_CAP_VER_MASK);
}
/* check if this device supports the desired state */
- if (state == PCI_D1 || state == PCI_D2) {
- if (state == PCI_D1 && !(pmc & PCI_PM_CAP_D1))
- return -EIO;
- else if (state == PCI_D2 && !(pmc & PCI_PM_CAP_D2))
- return -EIO;
- }
+ if (state == PCI_D1 && !(pmc & PCI_PM_CAP_D1))
+ return -EIO;
+ else if (state == PCI_D2 && !(pmc & PCI_PM_CAP_D2))
+ return -EIO;
+
+ pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr);
- /* If we're in D3, force entire word to 0.
+ /* If we're (effectively) in D3, force entire word to 0.
* This doesn't affect PME_Status, disables PME_En, and
* sets PowerState to 0.
*/
- if (dev->current_state >= PCI_D3hot)
- pmcsr = 0;
- else {
- pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr);
+ switch (dev->current_state) {
+ case PCI_D0:
+ case PCI_D1:
+ case PCI_D2:
pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
pmcsr |= state;
+ break;
+ case PCI_UNKNOWN: /* Boot-up */
+ if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot
+ && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
+ need_restore = 1;
+ /* Fall-through: force to D0 */
+ default:
+ pmcsr = 0;
+ break;
}
/* enter specified state */
msleep(10);
else if (state == PCI_D2 || dev->current_state == PCI_D2)
udelay(200);
+
+ /*
+ * Give firmware a chance to be called, such as ACPI _PRx, _PSx
+ * Firmware method after natice method ?
+ */
+ if (platform_pci_set_power_state)
+ platform_pci_set_power_state(dev, state);
+
dev->current_state = state;
+ /* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
+ * INTERFACE SPECIFICATION, REV. 1.2", a device transitioning
+ * from D3hot to D0 _may_ perform an internal reset, thereby
+ * going to "D0 Uninitialized" rather than "D0 Initialized".
+ * For example, at least some versions of the 3c905B and the
+ * 3c556B exhibit this behaviour.
+ *
+ * At least some laptop BIOSen (e.g. the Thinkpad T21) leave
+ * devices in a D3hot state at boot. Consequently, we need to
+ * restore at least the BARs so that the device will be
+ * accessible to its driver.
+ */
+ if (need_restore)
+ pci_restore_bars(dev);
+
return 0;
}
+int (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state);
+
/**
* pci_choose_state - Choose the power state of a PCI device
* @dev: PCI device to be suspended
pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state)
{
+ int ret;
+
if (!pci_find_capability(dev, PCI_CAP_ID_PM))
return PCI_D0;
- switch (state) {
- case 0: return PCI_D0;
- case 3: return PCI_D3hot;
+ if (platform_pci_choose_state) {
+ ret = platform_pci_choose_state(dev, state);
+ if (ret >= 0)
+ state.event = ret;
+ }
+
+ switch (state.event) {
+ case PM_EVENT_ON:
+ return PCI_D0;
+ case PM_EVENT_FREEZE:
+ case PM_EVENT_SUSPEND:
+ return PCI_D3hot;
default:
- printk("They asked me for state %d\n", state);
+ printk("They asked me for state %d\n", state.event);
BUG();
}
return PCI_D0;
/**
* pci_save_state - save the PCI configuration space of a device before suspending
* @dev: - PCI device that we're dealing with
- * @buffer: - buffer to hold config space context
- *
- * @buffer must be large enough to hold the entire PCI 2.2 config space
- * (>= 64 bytes).
*/
int
pci_save_state(struct pci_dev *dev)
/* XXX: 100% dword access ok here? */
for (i = 0; i < 16; i++)
pci_read_config_dword(dev, i * 4,&dev->saved_config_space[i]);
+ if ((i = pci_save_msi_state(dev)) != 0)
+ return i;
+ if ((i = pci_save_msix_state(dev)) != 0)
+ return i;
return 0;
}
/**
* pci_restore_state - Restore the saved state of a PCI device
* @dev: - PCI device that we're dealing with
- * @buffer: - saved PCI config space
- *
*/
int
pci_restore_state(struct pci_dev *dev)
{
int i;
+ int val;
- for (i = 0; i < 16; i++)
- pci_write_config_dword(dev,i * 4, dev->saved_config_space[i]);
+ /*
+ * The Base Address register should be programmed before the command
+ * register(s)
+ */
+ for (i = 15; i >= 0; i--) {
+ pci_read_config_dword(dev, i * 4, &val);
+ if (val != dev->saved_config_space[i]) {
+ printk(KERN_DEBUG "PM: Writing back config space on "
+ "device %s at offset %x (was %x, writing %x)\n",
+ pci_name(dev), i,
+ val, (int)dev->saved_config_space[i]);
+ pci_write_config_dword(dev,i * 4,
+ dev->saved_config_space[i]);
+ }
+ }
+ pci_restore_msi_state(dev);
+ pci_restore_msix_state(dev);
return 0;
}
{
int err;
- pci_set_power_state(dev, PCI_D0);
- if ((err = pcibios_enable_device(dev, bars)) < 0)
+ err = pci_set_power_state(dev, PCI_D0);
+ if (err < 0 && err != -EIO)
+ return err;
+ err = pcibios_enable_device(dev, bars);
+ if (err < 0)
return err;
return 0;
}
int
pci_enable_device(struct pci_dev *dev)
{
- int err;
-
- if ((err = pci_enable_device_bars(dev, (1 << PCI_NUM_RESOURCES) - 1)))
+ int err = pci_enable_device_bars(dev, (1 << PCI_NUM_RESOURCES) - 1);
+ if (err)
return err;
pci_fixup_device(pci_fixup_enable, dev);
dev->is_enabled = 1;
{
u8 pin;
- pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+ pin = dev->pin;
if (!pin)
return -1;
pin--;
* Returns 0 on success, or %EBUSY on error. A warning
* message is also printed on failure.
*/
-int pci_request_region(struct pci_dev *pdev, int bar, char *res_name)
+int pci_request_region(struct pci_dev *pdev, int bar, const char *res_name)
{
if (pci_resource_len(pdev, bar) == 0)
return 0;
* Returns 0 on success, or %EBUSY on error. A warning
* message is also printed on failure.
*/
-int pci_request_regions(struct pci_dev *pdev, char *res_name)
+int pci_request_regions(struct pci_dev *pdev, const char *res_name)
{
int i;
}
}
+/**
+ * pci_intx - enables/disables PCI INTx for device dev
+ * @pdev: the PCI device to operate on
+ * @enable: boolean: whether to enable or disable PCI INTx
+ *
+ * Enables/disables PCI INTx for device dev
+ */
+void
+pci_intx(struct pci_dev *pdev, int enable)
+{
+ u16 pci_command, new;
+
+ pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
+
+ if (enable) {
+ new = pci_command & ~PCI_COMMAND_INTX_DISABLE;
+ } else {
+ new = pci_command | PCI_COMMAND_INTX_DISABLE;
+ }
+
+ if (new != pci_command) {
+ pci_write_config_word(pdev, PCI_COMMAND, new);
+ }
+}
+
#ifndef HAVE_ARCH_PCI_SET_DMA_MASK
/*
* These can be overridden by arch-specific implementations
if (k)
*k++ = 0;
if (*str && (str = pcibios_setup(str)) && *str) {
- /* PCI layer options should be handled here */
- printk(KERN_ERR "PCI: Unknown option `%s'\n", str);
+ if (!strcmp(str, "nomsi")) {
+ pci_no_msi();
+ } else {
+ printk(KERN_ERR "PCI: Unknown option `%s'\n",
+ str);
+ }
}
str = k;
}
EXPORT_SYMBOL(isa_bridge);
#endif
+EXPORT_SYMBOL_GPL(pci_restore_bars);
EXPORT_SYMBOL(pci_enable_device_bars);
EXPORT_SYMBOL(pci_enable_device);
EXPORT_SYMBOL(pci_disable_device);
-EXPORT_SYMBOL(pci_max_busnr);
-EXPORT_SYMBOL(pci_bus_max_busnr);
EXPORT_SYMBOL(pci_find_capability);
EXPORT_SYMBOL(pci_bus_find_capability);
EXPORT_SYMBOL(pci_release_regions);
EXPORT_SYMBOL(pci_set_master);
EXPORT_SYMBOL(pci_set_mwi);
EXPORT_SYMBOL(pci_clear_mwi);
+EXPORT_SYMBOL_GPL(pci_intx);
EXPORT_SYMBOL(pci_set_dma_mask);
EXPORT_SYMBOL(pci_set_consistent_dma_mask);
EXPORT_SYMBOL(pci_assign_resource);
git://git.onelab.eu / linux-2.6.git / blobdiff