*
* Copyright (c) 1999 Martin Mares <mj@ucw.cz>
*
+ * Init/reset quirks for USB host controllers should be in the
+ * USB quirks file, where their drivers can access reuse it.
+ *
* The bridge optimization stuff has been removed. If you really
* have a silly BIOS which is unable to set your host bridge right,
* use the PowerTweak utility (see http://powertweak.sourceforge.net).
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M );
-static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region, unsigned size, int nr)
+static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region,
+ unsigned size, int nr, const char *name)
{
region &= ~(size-1);
if (region) {
+ struct pci_bus_region bus_region;
struct resource *res = dev->resource + nr;
res->name = pci_name(dev);
res->start = region;
res->end = region + size - 1;
res->flags = IORESOURCE_IO;
+
+ /* Convert from PCI bus to resource space. */
+ bus_region.start = res->start;
+ bus_region.end = res->end;
+ pcibios_bus_to_resource(dev, res, &bus_region);
+
pci_claim_resource(dev, nr);
+ printk("PCI quirk: region %04x-%04x claimed by %s\n", region, region + size - 1, name);
}
}
u16 region;
pci_read_config_word(dev, 0xE0, ®ion);
- quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES);
+ quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES, "ali7101 ACPI");
pci_read_config_word(dev, 0xE2, ®ion);
- quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1);
+ quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1, "ali7101 SMB");
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, quirk_ali7101_acpi );
+static void piix4_io_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable)
+{
+ u32 devres;
+ u32 mask, size, base;
+
+ pci_read_config_dword(dev, port, &devres);
+ if ((devres & enable) != enable)
+ return;
+ mask = (devres >> 16) & 15;
+ base = devres & 0xffff;
+ size = 16;
+ for (;;) {
+ unsigned bit = size >> 1;
+ if ((bit & mask) == bit)
+ break;
+ size = bit;
+ }
+ /*
+ * For now we only print it out. Eventually we'll want to
+ * reserve it (at least if it's in the 0x1000+ range), but
+ * let's get enough confirmation reports first.
+ */
+ base &= -size;
+ printk("%s PIO at %04x-%04x\n", name, base, base + size - 1);
+}
+
+static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable)
+{
+ u32 devres;
+ u32 mask, size, base;
+
+ pci_read_config_dword(dev, port, &devres);
+ if ((devres & enable) != enable)
+ return;
+ base = devres & 0xffff0000;
+ mask = (devres & 0x3f) << 16;
+ size = 128 << 16;
+ for (;;) {
+ unsigned bit = size >> 1;
+ if ((bit & mask) == bit)
+ break;
+ size = bit;
+ }
+ /*
+ * For now we only print it out. Eventually we'll want to
+ * reserve it, but let's get enough confirmation reports first.
+ */
+ base &= -size;
+ printk("%s MMIO at %04x-%04x\n", name, base, base + size - 1);
+}
+
/*
* PIIX4 ACPI: Two IO regions pointed to by longwords at
* 0x40 (64 bytes of ACPI registers)
- * 0x90 (32 bytes of SMB registers)
+ * 0x90 (16 bytes of SMB registers)
+ * and a few strange programmable PIIX4 device resources.
*/
static void __devinit quirk_piix4_acpi(struct pci_dev *dev)
{
- u32 region;
+ u32 region, res_a;
pci_read_config_dword(dev, 0x40, ®ion);
- quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES);
+ quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES, "PIIX4 ACPI");
pci_read_config_dword(dev, 0x90, ®ion);
- quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1);
+ quirk_io_region(dev, region, 16, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB");
+
+ /* Device resource A has enables for some of the other ones */
+ pci_read_config_dword(dev, 0x5c, &res_a);
+
+ piix4_io_quirk(dev, "PIIX4 devres B", 0x60, 3 << 21);
+ piix4_io_quirk(dev, "PIIX4 devres C", 0x64, 3 << 21);
+
+ /* Device resource D is just bitfields for static resources */
+
+ /* Device 12 enabled? */
+ if (res_a & (1 << 29)) {
+ piix4_io_quirk(dev, "PIIX4 devres E", 0x68, 1 << 20);
+ piix4_mem_quirk(dev, "PIIX4 devres F", 0x6c, 1 << 7);
+ }
+ /* Device 13 enabled? */
+ if (res_a & (1 << 30)) {
+ piix4_io_quirk(dev, "PIIX4 devres G", 0x70, 1 << 20);
+ piix4_mem_quirk(dev, "PIIX4 devres H", 0x74, 1 << 7);
+ }
+ piix4_io_quirk(dev, "PIIX4 devres I", 0x78, 1 << 20);
+ piix4_io_quirk(dev, "PIIX4 devres J", 0x7c, 1 << 20);
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, quirk_piix4_acpi );
u32 region;
pci_read_config_dword(dev, 0x40, ®ion);
- quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES);
+ quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES, "ICH4 ACPI/GPIO/TCO");
pci_read_config_dword(dev, 0x58, ®ion);
- quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1);
+ quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1, "ICH4 GPIO");
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, quirk_ich4_lpc_acpi );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, quirk_ich4_lpc_acpi );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, quirk_ich4_lpc_acpi );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, quirk_ich4_lpc_acpi );
+static void __devinit quirk_ich6_lpc_acpi(struct pci_dev *dev)
+{
+ u32 region;
+
+ pci_read_config_dword(dev, 0x40, ®ion);
+ quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES, "ICH6 ACPI/GPIO/TCO");
+
+ pci_read_config_dword(dev, 0x48, ®ion);
+ quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1, "ICH6 GPIO");
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc_acpi );
+
/*
* VIA ACPI: One IO region pointed to by longword at
* 0x48 or 0x20 (256 bytes of ACPI registers)
if (rev & 0x10) {
pci_read_config_dword(dev, 0x48, ®ion);
region &= PCI_BASE_ADDRESS_IO_MASK;
- quirk_io_region(dev, region, 256, PCI_BRIDGE_RESOURCES);
+ quirk_io_region(dev, region, 256, PCI_BRIDGE_RESOURCES, "vt82c586 ACPI");
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_vt82c586_acpi );
pci_read_config_word(dev, 0x70, &hm);
hm &= PCI_BASE_ADDRESS_IO_MASK;
- quirk_io_region(dev, hm, 128, PCI_BRIDGE_RESOURCES + 1);
+ quirk_io_region(dev, hm, 128, PCI_BRIDGE_RESOURCES + 1, "vt82c686 HW-mon");
pci_read_config_dword(dev, 0x90, &smb);
smb &= PCI_BASE_ADDRESS_IO_MASK;
- quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 2);
+ quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 2, "vt82c686 SMB");
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vt82c686_acpi );
+/*
+ * VIA VT8235 ISA Bridge: Two IO regions pointed to by words at
+ * 0x88 (128 bytes of power management registers)
+ * 0xd0 (16 bytes of SMB registers)
+ */
+static void __devinit quirk_vt8235_acpi(struct pci_dev *dev)
+{
+ u16 pm, smb;
+
+ pci_read_config_word(dev, 0x88, &pm);
+ pm &= PCI_BASE_ADDRESS_IO_MASK;
+ quirk_io_region(dev, pm, 128, PCI_BRIDGE_RESOURCES, "vt8235 PM");
+
+ pci_read_config_word(dev, 0xd0, &smb);
+ smb &= PCI_BASE_ADDRESS_IO_MASK;
+ quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 1, "vt8235 SMB");
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi);
+
#ifdef CONFIG_X86_IO_APIC
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic );
+/*
+ * VIA 8237: Some BIOSs don't set the 'Bypass APIC De-Assert Message' Bit.
+ * This leads to doubled level interrupt rates.
+ * Set this bit to get rid of cycle wastage.
+ * Otherwise uncritical.
+ */
+static void __devinit quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev)
+{
+ u8 misc_control2;
+#define BYPASS_APIC_DEASSERT 8
+
+ pci_read_config_byte(dev, 0x5B, &misc_control2);
+ if (!(misc_control2 & BYPASS_APIC_DEASSERT)) {
+ printk(KERN_INFO "PCI: Bypassing VIA 8237 APIC De-Assert Message\n");
+ pci_write_config_byte(dev, 0x5B, misc_control2|BYPASS_APIC_DEASSERT);
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert);
+
/*
* The AMD io apic can hang the box when an apic irq is masked.
* We check all revs >= B0 (yet not in the pre production!) as the bug
{
unsigned char revid, tmp;
- pci_msi_quirk = 1;
- printk(KERN_WARNING "PCI: MSI quirk detected. pci_msi_quirk set.\n");
+ if (dev->subordinate) {
+ printk(KERN_WARNING "PCI: MSI quirk detected. "
+ "PCI_BUS_FLAGS_NO_MSI set for subordinate bus.\n");
+ dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
+ }
if (nr_ioapics == 0)
return;
pci_write_config_byte( dev, AMD8131_MISC, tmp);
}
}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_APIC, quirk_amd_8131_ioapic );
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic);
static void __init quirk_svw_msi(struct pci_dev *dev)
{
* non-x86 architectures (yes Via exists on PPC among other places),
* we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
* interrupts delivered properly.
+ *
+ * Some of the on-chip devices are actually '586 devices' so they are
+ * listed here.
*/
static void quirk_via_irq(struct pci_dev *dev)
{
new_irq = dev->irq & 0xf;
pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
if (new_irq != irq) {
- printk(KERN_INFO "PCI: Via IRQ fixup for %s, from %d to %d\n",
+ printk(KERN_INFO "PCI: VIA IRQ fixup for %s, from %d to %d\n",
pci_name(dev), irq, new_irq);
udelay(15); /* unknown if delay really needed */
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
}
}
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
-
-/*
- * PIIX3 USB: We have to disable USB interrupts that are
- * hardwired to PIRQD# and may be shared with an
- * external device.
- *
- * Legacy Support Register (LEGSUP):
- * bit13: USB PIRQ Enable (USBPIRQDEN),
- * bit4: Trap/SMI On IRQ Enable (USBSMIEN).
- *
- * We mask out all r/wc bits, too.
- */
-static void __devinit quirk_piix3_usb(struct pci_dev *dev)
-{
- u16 legsup;
-
- pci_read_config_word(dev, 0xc0, &legsup);
- legsup &= 0x50ef;
- pci_write_config_word(dev, 0xc0, legsup);
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_2, quirk_piix3_usb );
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_2, quirk_piix3_usb );
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, quirk_via_irq);
/*
* VIA VT82C598 has its device ID settable and many BIOSes
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82375, quirk_eisa_bridge );
+/*
+ * On the MSI-K8T-Neo2Fir Board, the internal Soundcard is disabled
+ * when a PCI-Soundcard is added. The BIOS only gives Options
+ * "Disabled" and "AUTO". This Quirk Sets the corresponding
+ * Register-Value to enable the Soundcard.
+ */
+static void __init k8t_sound_hostbridge(struct pci_dev *dev)
+{
+ unsigned char val;
+
+ printk(KERN_INFO "PCI: Quirk-MSI-K8T Soundcard On\n");
+ pci_read_config_byte(dev, 0x50, &val);
+ if (val == 0x88 || val == 0xc8) {
+ pci_write_config_byte(dev, 0x50, val & (~0x40));
+
+ /* Verify the Change for Status output */
+ pci_read_config_byte(dev, 0x50, &val);
+ if (val & 0x40)
+ printk(KERN_INFO "PCI: MSI-K8T soundcard still off\n");
+ else
+ printk(KERN_INFO "PCI: MSI-K8T soundcard on\n");
+ } else {
+ printk(KERN_INFO "PCI: Unexpected Value in PCI-Register: "
+ "no Change!\n");
+ }
+
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_hostbridge);
+
+#ifndef CONFIG_ACPI_SLEEP
/*
* On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge
* is not activated. The myth is that Asus said that they do not want the
* bridge. Unfortunately, this device has no subvendor/subdevice ID. So it
* becomes necessary to do this tweak in two steps -- I've chosen the Host
* bridge as trigger.
+ *
+ * Actually, leaving it unhidden and not redoing the quirk over suspend2ram
+ * will cause thermal management to break down, and causing machine to
+ * overheat.
*/
-static int __initdata asus_hides_smbus = 0;
+static int __initdata asus_hides_smbus;
static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev)
{
if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) {
if (dev->device == PCI_DEVICE_ID_INTEL_82845_HB)
switch(dev->subsystem_device) {
+ case 0x8025: /* P4B-LX */
case 0x8070: /* P4B */
case 0x8088: /* P4B533 */
case 0x1626: /* L3C notebook */
case 0x186a: /* M6Ne notebook */
asus_hides_smbus = 1;
}
+ if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) {
+ switch (dev->subsystem_device) {
+ case 0x1882: /* M6V notebook */
+ case 0x1977: /* A6VA notebook */
+ asus_hides_smbus = 1;
+ }
+ }
} else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_HP)) {
if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
switch(dev->subsystem_device) {
if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB)
switch (dev->subsystem_device) {
case 0x12bc: /* HP D330L */
+ case 0x12bd: /* HP D530 */
+ asus_hides_smbus = 1;
+ }
+ if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) {
+ switch (dev->subsystem_device) {
+ case 0x099c: /* HP Compaq nx6110 */
asus_hides_smbus = 1;
}
+ }
} else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_TOSHIBA)) {
if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB)
switch(dev->subsystem_device) {
case 0x0001: /* Toshiba Satellite A40 */
asus_hides_smbus = 1;
}
+ if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
+ switch(dev->subsystem_device) {
+ case 0x0001: /* Toshiba Tecra M2 */
+ asus_hides_smbus = 1;
+ }
} else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) {
if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
switch(dev->subsystem_device) {
case 0xC00C: /* Samsung P35 notebook */
asus_hides_smbus = 1;
}
+ } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ)) {
+ if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
+ switch(dev->subsystem_device) {
+ case 0x0058: /* Compaq Evo N620c */
+ asus_hides_smbus = 1;
+ }
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845_HB, asus_hides_smbus_hostbridge );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_7205_0, asus_hides_smbus_hostbridge );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855PM_HB, asus_hides_smbus_hostbridge );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, asus_hides_smbus_hostbridge );
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge );
static void __init asus_hides_smbus_lpc(struct pci_dev *dev)
{
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc );
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc );
+
+static void __init asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
+{
+ u32 val, rcba;
+ void __iomem *base;
+
+ if (likely(!asus_hides_smbus))
+ return;
+ pci_read_config_dword(dev, 0xF0, &rcba);
+ base = ioremap_nocache(rcba & 0xFFFFC000, 0x4000); /* use bits 31:14, 16 kB aligned */
+ if (base == NULL) return;
+ val=readl(base + 0x3418); /* read the Function Disable register, dword mode only */
+ writel(val & 0xFFFFFFF7, base + 0x3418); /* enable the SMBus device */
+ iounmap(base);
+ printk(KERN_INFO "PCI: Enabled ICH6/i801 SMBus device\n");
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6 );
+
+#endif
/*
* SiS 96x south bridge: BIOS typically hides SMBus device...
pci_read_config_byte(dev, 0x77, &val);
}
-
-#define UHCI_USBLEGSUP 0xc0 /* legacy support */
-#define UHCI_USBCMD 0 /* command register */
-#define UHCI_USBSTS 2 /* status register */
-#define UHCI_USBINTR 4 /* interrupt register */
-#define UHCI_USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */
-#define UHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
-#define UHCI_USBCMD_GRESET (1 << 2) /* Global reset */
-#define UHCI_USBCMD_CONFIGURE (1 << 6) /* config semaphore */
-#define UHCI_USBSTS_HALTED (1 << 5) /* HCHalted bit */
-
-#define OHCI_CONTROL 0x04
-#define OHCI_CMDSTATUS 0x08
-#define OHCI_INTRSTATUS 0x0c
-#define OHCI_INTRENABLE 0x10
-#define OHCI_INTRDISABLE 0x14
-#define OHCI_OCR (1 << 3) /* ownership change request */
-#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
-#define OHCI_INTR_OC (1 << 30) /* ownership change */
-
-#define EHCI_HCC_PARAMS 0x08 /* extended capabilities */
-#define EHCI_USBCMD 0 /* command register */
-#define EHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
-#define EHCI_USBSTS 4 /* status register */
-#define EHCI_USBSTS_HALTED (1 << 12) /* HCHalted bit */
-#define EHCI_USBINTR 8 /* interrupt register */
-#define EHCI_USBLEGSUP 0 /* legacy support register */
-#define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */
-#define EHCI_USBLEGSUP_OS (1 << 24) /* OS semaphore */
-#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */
-#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */
-
-int usb_early_handoff __devinitdata = 0;
-static int __init usb_handoff_early(char *str)
-{
- usb_early_handoff = 1;
- return 0;
-}
-__setup("usb-handoff", usb_handoff_early);
-
-static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev)
-{
- unsigned long base = 0;
- int wait_time, delta;
- u16 val, sts;
- int i;
-
- for (i = 0; i < PCI_ROM_RESOURCE; i++)
- if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
- base = pci_resource_start(pdev, i);
- break;
- }
-
- if (!base)
- return;
-
- /*
- * stop controller
- */
- sts = inw(base + UHCI_USBSTS);
- val = inw(base + UHCI_USBCMD);
- val &= ~(u16)(UHCI_USBCMD_RUN | UHCI_USBCMD_CONFIGURE);
- outw(val, base + UHCI_USBCMD);
-
- /*
- * wait while it stops if it was running
- */
- if ((sts & UHCI_USBSTS_HALTED) == 0)
- {
- wait_time = 1000;
- delta = 100;
-
- do {
- outw(0x1f, base + UHCI_USBSTS);
- udelay(delta);
- wait_time -= delta;
- val = inw(base + UHCI_USBSTS);
- if (val & UHCI_USBSTS_HALTED)
- break;
- } while (wait_time > 0);
- }
-
- /*
- * disable interrupts & legacy support
- */
- outw(0, base + UHCI_USBINTR);
- outw(0x1f, base + UHCI_USBSTS);
- pci_read_config_word(pdev, UHCI_USBLEGSUP, &val);
- if (val & 0xbf)
- pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_DEFAULT);
-
-}
-
-static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
-{
- void __iomem *base;
- int wait_time;
-
- base = ioremap_nocache(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
- if (base == NULL) return;
-
- if (readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
- wait_time = 500; /* 0.5 seconds */
- writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
- writel(OHCI_OCR, base + OHCI_CMDSTATUS);
- while (wait_time > 0 &&
- readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
- wait_time -= 10;
- msleep(10);
- }
- }
-
- /*
- * disable interrupts
- */
- writel(~(u32)0, base + OHCI_INTRDISABLE);
- writel(~(u32)0, base + OHCI_INTRSTATUS);
-
- iounmap(base);
-}
-
-static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
-{
- int wait_time, delta;
- void __iomem *base, *op_reg_base;
- u32 hcc_params, val, temp;
- u8 cap_length;
-
- base = ioremap_nocache(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
- if (base == NULL) return;
-
- cap_length = readb(base);
- op_reg_base = base + cap_length;
- hcc_params = readl(base + EHCI_HCC_PARAMS);
- hcc_params = (hcc_params >> 8) & 0xff;
- if (hcc_params) {
- pci_read_config_dword(pdev,
- hcc_params + EHCI_USBLEGSUP,
- &val);
- if (((val & 0xff) == 1) && (val & EHCI_USBLEGSUP_BIOS)) {
- /*
- * Ok, BIOS is in smm mode, try to hand off...
- */
- pci_read_config_dword(pdev,
- hcc_params + EHCI_USBLEGCTLSTS,
- &temp);
- pci_write_config_dword(pdev,
- hcc_params + EHCI_USBLEGCTLSTS,
- temp | EHCI_USBLEGCTLSTS_SOOE);
- val |= EHCI_USBLEGSUP_OS;
- pci_write_config_dword(pdev,
- hcc_params + EHCI_USBLEGSUP,
- val);
-
- wait_time = 500;
- do {
- msleep(10);
- wait_time -= 10;
- pci_read_config_dword(pdev,
- hcc_params + EHCI_USBLEGSUP,
- &val);
- } while (wait_time && (val & EHCI_USBLEGSUP_BIOS));
- if (!wait_time) {
- /*
- * well, possibly buggy BIOS...
- */
- printk(KERN_WARNING "EHCI early BIOS handoff "
- "failed (BIOS bug ?)\n");
- pci_write_config_dword(pdev,
- hcc_params + EHCI_USBLEGSUP,
- EHCI_USBLEGSUP_OS);
- pci_write_config_dword(pdev,
- hcc_params + EHCI_USBLEGCTLSTS,
- 0);
- }
- }
- }
-
- /*
- * halt EHCI & disable its interrupts in any case
- */
- val = readl(op_reg_base + EHCI_USBSTS);
- if ((val & EHCI_USBSTS_HALTED) == 0) {
- val = readl(op_reg_base + EHCI_USBCMD);
- val &= ~EHCI_USBCMD_RUN;
- writel(val, op_reg_base + EHCI_USBCMD);
-
- wait_time = 2000;
- delta = 100;
- do {
- writel(0x3f, op_reg_base + EHCI_USBSTS);
- udelay(delta);
- wait_time -= delta;
- val = readl(op_reg_base + EHCI_USBSTS);
- if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) {
- break;
- }
- } while (wait_time > 0);
- }
- writel(0, op_reg_base + EHCI_USBINTR);
- writel(0x3f, op_reg_base + EHCI_USBSTS);
-
- iounmap(base);
-
- return;
-}
-
-
-
-static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
-{
- if (!usb_early_handoff)
- return;
-
- if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x00)) { /* UHCI */
- quirk_usb_handoff_uhci(pdev);
- } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) { /* OHCI */
- quirk_usb_handoff_ohci(pdev);
- } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x20)) { /* EHCI */
- quirk_usb_disable_ehci(pdev);
- }
-
- return;
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
-
/*
* ... This is further complicated by the fact that some SiS96x south
* bridges pretend to be 85C503/5513 instead. In that case see if we
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_735, quirk_sis_96x_compatible );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503 );
+/*
+ * On ASUS A8V and A8V Deluxe boards, the onboard AC97 audio controller
+ * and MC97 modem controller are disabled when a second PCI soundcard is
+ * present. This patch, tweaking the VT8237 ISA bridge, enables them.
+ * -- bjd
+ */
+static void __init asus_hides_ac97_lpc(struct pci_dev *dev)
+{
+ u8 val;
+ int asus_hides_ac97 = 0;
+
+ if (likely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) {
+ if (dev->device == PCI_DEVICE_ID_VIA_8237)
+ asus_hides_ac97 = 1;
+ }
+
+ if (!asus_hides_ac97)
+ return;
+
+ pci_read_config_byte(dev, 0x50, &val);
+ if (val & 0xc0) {
+ pci_write_config_byte(dev, 0x50, val & (~0xc0));
+ pci_read_config_byte(dev, 0x50, &val);
+ if (val & 0xc0)
+ printk(KERN_INFO "PCI: onboard AC97/MC97 devices continue to play 'hide and seek'! 0x%x\n", val);
+ else
+ printk(KERN_INFO "PCI: enabled onboard AC97/MC97 devices\n");
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc );
+
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic );
#endif
-#ifdef CONFIG_SCSI_SATA
+enum ide_combined_type { COMBINED = 0, IDE = 1, LIBATA = 2 };
+/* Defaults to combined */
+static enum ide_combined_type combined_mode;
+
+static int __init combined_setup(char *str)
+{
+ if (!strncmp(str, "ide", 3))
+ combined_mode = IDE;
+ else if (!strncmp(str, "libata", 6))
+ combined_mode = LIBATA;
+ else /* "combined" or anything else defaults to old behavior */
+ combined_mode = COMBINED;
+
+ return 1;
+}
+__setup("combined_mode=", combined_setup);
+
+#ifdef CONFIG_SCSI_SATA_INTEL_COMBINED
static void __devinit quirk_intel_ide_combined(struct pci_dev *pdev)
{
u8 prog, comb, tmp;
case 0x27c4:
ich = 7;
break;
+ case 0x2828: /* ICH8M */
+ ich = 8;
+ break;
default:
/* we do not handle this PCI device */
return;
else
return; /* not in combined mode */
} else {
- WARN_ON((ich != 6) && (ich != 7));
+ WARN_ON((ich != 6) && (ich != 7) && (ich != 8));
tmp &= 0x3; /* interesting bits 1:0 */
if (tmp & (1 << 0))
comb = (1 << 2); /* PATA port 0, SATA port 1 */
if (prog & comb)
return;
+ /* Don't reserve any so the IDE driver can get them (but only if
+ * combined_mode=ide).
+ */
+ if (combined_mode == IDE)
+ return;
+
+ /* Grab them both for libata if combined_mode=libata. */
+ if (combined_mode == LIBATA) {
+ request_region(0x1f0, 8, "libata"); /* port 0 */
+ request_region(0x170, 8, "libata"); /* port 1 */
+ return;
+ }
+
/* SATA port is in legacy mode. Reserve port so that
* IDE driver does not attempt to use it. If request_region
* fails, it will be obvious at boot time, so we don't bother
request_region(0x170, 8, "libata"); /* port 1 */
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_intel_ide_combined );
-#endif /* CONFIG_SCSI_SATA */
+#endif /* CONFIG_SCSI_SATA_INTEL_COMBINED */
int pcie_mch_quirk;
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_pcie_mch );
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_pcie_mch );
+
+/*
+ * It's possible for the MSI to get corrupted if shpc and acpi
+ * are used together on certain PXH-based systems.
+ */
+static void __devinit quirk_pcie_pxh(struct pci_dev *dev)
+{
+ disable_msi_mode(dev, pci_find_capability(dev, PCI_CAP_ID_MSI),
+ PCI_CAP_ID_MSI);
+ dev->no_msi = 1;
+
+ printk(KERN_WARNING "PCI: PXH quirk detected, "
+ "disabling MSI for SHPC device\n");
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_0, quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_1, quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh);
+
+
+/*
+ * Fixup the cardbus bridges on the IBM Dock II docking station
+ */
+static void __devinit quirk_ibm_dock2_cardbus(struct pci_dev *dev)
+{
+ u32 val;
+
+ /*
+ * tie the 2 interrupt pins to INTA, and configure the
+ * multifunction routing register to handle this.
+ */
+ if ((dev->subsystem_vendor == PCI_VENDOR_ID_IBM) &&
+ (dev->subsystem_device == 0x0148)) {
+ printk(KERN_INFO "PCI: Found IBM Dock II Cardbus Bridge "
+ "applying quirk\n");
+ pci_read_config_dword(dev, 0x8c, &val);
+ val = ((val & 0xffffff00) | 0x1002);
+ pci_write_config_dword(dev, 0x8c, val);
+ pci_read_config_dword(dev, 0x80, &val);
+ val = ((val & 0x00ffff00) | 0x2864c077);
+ pci_write_config_dword(dev, 0x80, val);
+ }
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1420,
+ quirk_ibm_dock2_cardbus);
+
static void __devinit quirk_netmos(struct pci_dev *dev)
{
unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, quirk_netmos);
+
+static void __devinit fixup_rev1_53c810(struct pci_dev* dev)
+{
+ /* rev 1 ncr53c810 chips don't set the class at all which means
+ * they don't get their resources remapped. Fix that here.
+ */
+
+ if (dev->class == PCI_CLASS_NOT_DEFINED) {
+ printk(KERN_INFO "NCR 53c810 rev 1 detected, setting PCI class.\n");
+ dev->class = PCI_CLASS_STORAGE_SCSI;
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
+
+
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end)
{
while (f < end) {
pci_do_fixups(dev, start, end);
}
+/* Enable 1k I/O space granularity on the Intel P64H2 */
+static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
+{
+ u16 en1k;
+ u8 io_base_lo, io_limit_lo;
+ unsigned long base, limit;
+ struct resource *res = dev->resource + PCI_BRIDGE_RESOURCES;
+
+ pci_read_config_word(dev, 0x40, &en1k);
+
+ if (en1k & 0x200) {
+ printk(KERN_INFO "PCI: Enable I/O Space to 1 KB Granularity\n");
+
+ pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo);
+ pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo);
+ base = (io_base_lo & (PCI_IO_RANGE_MASK | 0x0c)) << 8;
+ limit = (io_limit_lo & (PCI_IO_RANGE_MASK | 0x0c)) << 8;
+
+ if (base <= limit) {
+ res->start = base;
+ res->end = limit + 0x3ff;
+ }
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io);
+
EXPORT_SYMBOL(pcie_mch_quirk);
#ifdef CONFIG_HOTPLUG
EXPORT_SYMBOL(pci_fixup_device);
git://git.onelab.eu / linux-2.6.git / blobdiff