#include <linux/pci.h>
#include <linux/init.h>
#include <linux/delay.h>
-
-#undef DEBUG
+#include <linux/acpi.h>
+#include "pci.h"
/* Deal with broken BIOS'es that neglect to enable passive release,
which can cause problems in combination with the 82441FX/PPro MTRRs */
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, quirk_ich4_lpc_acpi );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, quirk_ich4_lpc_acpi );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, quirk_ich4_lpc_acpi );
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, quirk_ich4_lpc_acpi );
/*
* VIA ACPI: One IO region pointed to by longword at
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_ANY_ID, quirk_ioapic_rmw );
+int pci_msi_quirk;
+
#define AMD8131_revA0 0x01
#define AMD8131_revB0 0x11
#define AMD8131_MISC 0x40
{
unsigned char revid, tmp;
+ pci_msi_quirk = 1;
+ printk(KERN_WARNING "PCI: MSI quirk detected. pci_msi_quirk set.\n");
+
if (nr_ioapics == 0)
return;
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_APIC, quirk_amd_8131_ioapic );
+static void __init quirk_svw_msi(struct pci_dev *dev)
+{
+ pci_msi_quirk = 1;
+ printk(KERN_WARNING "PCI: MSI quirk detected. pci_msi_quirk set.\n");
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_svw_msi );
#endif /* CONFIG_X86_IO_APIC */
-/*
- * Via 686A/B: The PCI_INTERRUPT_LINE register for the on-chip
- * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature:
- * when written, it makes an internal connection to the PIC.
- * For these devices, this register is defined to be 4 bits wide.
- * Normally this is fine. However for IO-APIC motherboards, or
- * non-x86 architectures (yes Via exists on PPC among other places),
- * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
- * interrupts delivered properly.
- *
- * TODO: When we have device-specific interrupt routers,
- * quirk_via_irqpic will go away from quirks.
- */
-
/*
* FIXME: it is questionable that quirk_via_acpi
* is needed. It shows up as an ISA bridge, and does not
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi );
+/*
+ * Via 686A/B: The PCI_INTERRUPT_LINE register for the on-chip
+ * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature:
+ * when written, it makes an internal connection to the PIC.
+ * For these devices, this register is defined to be 4 bits wide.
+ * Normally this is fine. However for IO-APIC motherboards, or
+ * non-x86 architectures (yes Via exists on PPC among other places),
+ * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
+ * interrupts delivered properly.
+ */
+static void quirk_via_irq(struct pci_dev *dev)
+{
+ u8 irq, new_irq;
+
+ new_irq = dev->irq & 0xf;
+ pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
+ if (new_irq != irq) {
+ printk(KERN_INFO "PCI: Via IRQ fixup for %s, from %d to %d\n",
+ pci_name(dev), irq, new_irq);
+ udelay(15); /* unknown if delay really needed */
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
+ }
+}
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
+
/*
* PIIX3 USB: We have to disable USB interrupts that are
* hardwired to PIRQD# and may be shared with an
return;
pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0);
}
-DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy );
+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy);
/*
* Following the PCI ordering rules is optional on the AMD762. I'm not
printk(KERN_INFO "PCI: Ignoring BAR%d-%d of IDE controller %s\n",
first_bar, last_bar, pci_name(dev));
}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_ide_bases );
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_ide_bases);
/*
* Ensure C0 rev restreaming is off. This is normally done by
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb );
-/*
- * VIA northbridges care about PCI_INTERRUPT_LINE
- */
-int via_interrupt_line_quirk;
-
-static void __devinit quirk_via_bridge(struct pci_dev *pdev)
-{
- if(pdev->devfn == 0) {
- printk(KERN_INFO "PCI: Via IRQ fixup\n");
- via_interrupt_line_quirk = 1;
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_bridge );
/*
* Serverworks CSB5 IDE does not fully support native mode
*/
-static void __init quirk_svwks_csb5ide(struct pci_dev *pdev)
+static void __devinit quirk_svwks_csb5ide(struct pci_dev *pdev)
{
u8 prog;
pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog);
if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB)
switch (dev->subsystem_device) {
case 0x1751: /* M2N notebook */
+ case 0x1821: /* M5N notebook */
asus_hides_smbus = 1;
}
if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
switch (dev->subsystem_device) {
+ case 0x184b: /* W1N notebook */
case 0x186a: /* M6Ne notebook */
asus_hides_smbus = 1;
}
case 0x12bc: /* HP D330L */
asus_hides_smbus = 1;
}
+ } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_TOSHIBA)) {
+ if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB)
+ switch(dev->subsystem_device) {
+ case 0x0001: /* Toshiba Satellite A40 */
+ asus_hides_smbus = 1;
+ }
+ } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) {
+ if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
+ switch(dev->subsystem_device) {
+ case 0xC00C: /* Samsung P35 notebook */
+ asus_hides_smbus = 1;
+ }
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845_HB, asus_hides_smbus_hostbridge );
case 0x2651:
case 0x2652:
case 0x2653:
+ case 0x2680: /* ESB2 */
ich = 6;
break;
case 0x27c0:
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_pcie_mch );
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_pcie_mch );
+static void __devinit quirk_netmos(struct pci_dev *dev)
+{
+ unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4;
+ unsigned int num_serial = dev->subsystem_device & 0xf;
+
+ /*
+ * These Netmos parts are multiport serial devices with optional
+ * parallel ports. Even when parallel ports are present, they
+ * are identified as class SERIAL, which means the serial driver
+ * will claim them. To prevent this, mark them as class OTHER.
+ * These combo devices should be claimed by parport_serial.
+ *
+ * The subdevice ID is of the form 0x00PS, where <P> is the number
+ * of parallel ports and <S> is the number of serial ports.
+ */
+ switch (dev->device) {
+ case PCI_DEVICE_ID_NETMOS_9735:
+ case PCI_DEVICE_ID_NETMOS_9745:
+ case PCI_DEVICE_ID_NETMOS_9835:
+ case PCI_DEVICE_ID_NETMOS_9845:
+ case PCI_DEVICE_ID_NETMOS_9855:
+ if ((dev->class >> 8) == PCI_CLASS_COMMUNICATION_SERIAL &&
+ num_parallel) {
+ printk(KERN_INFO "PCI: Netmos %04x (%u parallel, "
+ "%u serial); changing class SERIAL to OTHER "
+ "(use parport_serial)\n",
+ dev->device, num_parallel, num_serial);
+ dev->class = (PCI_CLASS_COMMUNICATION_OTHER << 8) |
+ (dev->class & 0xff);
+ }
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, quirk_netmos);
+
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end)
{
while (f < end) {
git://git.onelab.eu / linux-2.6.git / blobdiff