static irqreturn_t aac_rx_intr(int irq, void *dev_id, struct pt_regs *regs)
{
struct aac_dev *dev = dev_id;
- unsigned long bellbits;
- u8 intstat, mask;
- intstat = rx_readb(dev, MUnit.OISR);
- /*
- * Read mask and invert because drawbridge is reversed.
- * This allows us to only service interrupts that have
- * been enabled.
- */
- mask = ~(dev->OIMR);
- /* Check to see if this is our interrupt. If it isn't just return */
- if (intstat & mask)
- {
- bellbits = rx_readl(dev, OutboundDoorbellReg);
- if (bellbits & DoorBellPrintfReady) {
- aac_printf(dev, le32_to_cpu(rx_readl (dev, IndexRegs.Mailbox[5])));
- rx_writel(dev, MUnit.ODR,DoorBellPrintfReady);
- rx_writel(dev, InboundDoorbellReg,DoorBellPrintfDone);
- }
- else if (bellbits & DoorBellAdapterNormCmdReady) {
- rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady);
- aac_command_normal(&dev->queues->queue[HostNormCmdQueue]);
- }
- else if (bellbits & DoorBellAdapterNormRespReady) {
- aac_response_normal(&dev->queues->queue[HostNormRespQueue]);
- rx_writel(dev, MUnit.ODR,DoorBellAdapterNormRespReady);
- }
- else if (bellbits & DoorBellAdapterNormCmdNotFull) {
- rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
+
+ dprintk((KERN_DEBUG "aac_rx_intr(%d,%p,%p)\n", irq, dev_id, regs));
+ if (dev->new_comm_interface) {
+ u32 Index = rx_readl(dev, MUnit.OutboundQueue);
+ if (Index == 0xFFFFFFFFL)
+ Index = rx_readl(dev, MUnit.OutboundQueue);
+ if (Index != 0xFFFFFFFFL) {
+ do {
+ if (aac_intr_normal(dev, Index)) {
+ rx_writel(dev, MUnit.OutboundQueue, Index);
+ rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespReady);
+ }
+ Index = rx_readl(dev, MUnit.OutboundQueue);
+ } while (Index != 0xFFFFFFFFL);
+ return IRQ_HANDLED;
}
- else if (bellbits & DoorBellAdapterNormRespNotFull) {
- rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
- rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespNotFull);
+ } else {
+ unsigned long bellbits;
+ u8 intstat;
+ intstat = rx_readb(dev, MUnit.OISR);
+ /*
+ * Read mask and invert because drawbridge is reversed.
+ * This allows us to only service interrupts that have
+ * been enabled.
+ * Check to see if this is our interrupt. If it isn't just return
+ */
+ if (intstat & ~(dev->OIMR))
+ {
+ bellbits = rx_readl(dev, OutboundDoorbellReg);
+ if (bellbits & DoorBellPrintfReady) {
+ aac_printf(dev, rx_readl (dev, IndexRegs.Mailbox[5]));
+ rx_writel(dev, MUnit.ODR,DoorBellPrintfReady);
+ rx_writel(dev, InboundDoorbellReg,DoorBellPrintfDone);
+ }
+ else if (bellbits & DoorBellAdapterNormCmdReady) {
+ rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady);
+ aac_command_normal(&dev->queues->queue[HostNormCmdQueue]);
+ }
+ else if (bellbits & DoorBellAdapterNormRespReady) {
+ rx_writel(dev, MUnit.ODR,DoorBellAdapterNormRespReady);
+ aac_response_normal(&dev->queues->queue[HostNormRespQueue]);
+ }
+ else if (bellbits & DoorBellAdapterNormCmdNotFull) {
+ rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
+ }
+ else if (bellbits & DoorBellAdapterNormRespNotFull) {
+ rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
+ rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespNotFull);
+ }
+ return IRQ_HANDLED;
}
- return IRQ_HANDLED;
}
return IRQ_NONE;
}
+/**
+ * aac_rx_disable_interrupt - Disable interrupts
+ * @dev: Adapter
+ */
+
+static void aac_rx_disable_interrupt(struct aac_dev *dev)
+{
+ rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff);
+}
+
/**
* rx_sync_cmd - send a command and wait
* @dev: Adapter
* for its completion.
*/
-static int rx_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status)
+static int rx_sync_cmd(struct aac_dev *dev, u32 command,
+ u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6,
+ u32 *status, u32 * r1, u32 * r2, u32 * r3, u32 * r4)
{
unsigned long start;
int ok;
*/
rx_writel(dev, InboundMailbox0, command);
/*
- * Write the parameters into Mailboxes 1 - 4
+ * Write the parameters into Mailboxes 1 - 6
*/
rx_writel(dev, InboundMailbox1, p1);
- rx_writel(dev, InboundMailbox2, 0);
- rx_writel(dev, InboundMailbox3, 0);
- rx_writel(dev, InboundMailbox4, 0);
+ rx_writel(dev, InboundMailbox2, p2);
+ rx_writel(dev, InboundMailbox3, p3);
+ rx_writel(dev, InboundMailbox4, p4);
/*
* Clear the synch command doorbell to start on a clean slate.
*/
/*
* Disable doorbell interrupts
*/
- rx_writeb(dev, MUnit.OIMR, dev->OIMR |= 0x04);
+ rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff);
/*
* Force the completion of the mask register write before issuing
* the interrupt.
/*
* Yield the processor in case we are slow
*/
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(1);
+ msleep(1);
}
if (ok != 1) {
/*
* Restore interrupt mask even though we timed out
*/
- rx_writeb(dev, MUnit.OIMR, dev->OIMR &= 0xfb);
+ if (dev->new_comm_interface)
+ rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
+ else
+ rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
return -ETIMEDOUT;
}
/*
*/
if (status)
*status = rx_readl(dev, IndexRegs.Mailbox[0]);
+ if (r1)
+ *r1 = rx_readl(dev, IndexRegs.Mailbox[1]);
+ if (r2)
+ *r2 = rx_readl(dev, IndexRegs.Mailbox[2]);
+ if (r3)
+ *r3 = rx_readl(dev, IndexRegs.Mailbox[3]);
+ if (r4)
+ *r4 = rx_readl(dev, IndexRegs.Mailbox[4]);
/*
* Clear the synch command doorbell.
*/
/*
* Restore interrupt mask
*/
- rx_writeb(dev, MUnit.OIMR, dev->OIMR &= 0xfb);
+ if (dev->new_comm_interface)
+ rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
+ else
+ rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
return 0;
}
static void aac_rx_interrupt_adapter(struct aac_dev *dev)
{
- u32 ret;
- rx_sync_cmd(dev, BREAKPOINT_REQUEST, 0, &ret);
+ rx_sync_cmd(dev, BREAKPOINT_REQUEST, 0, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
}
/**
rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_3);
break;
case HostShutdown:
-// rx_sync_cmd(dev, HOST_CRASHING, 0, 0, 0, 0, &ret);
+// rx_sync_cmd(dev, HOST_CRASHING, 0, 0, 0, 0, 0, 0,
+// NULL, NULL, NULL, NULL, NULL);
break;
case FastIo:
rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_6);
static void aac_rx_start_adapter(struct aac_dev *dev)
{
- u32 status;
struct aac_init *init;
init = dev->init;
init->HostElapsedSeconds = cpu_to_le32(get_seconds());
- /*
- * Tell the adapter we are back and up and running so it will scan
- * its command queues and enable our interrupts
- */
- dev->irq_mask = (DoorBellPrintfReady | OUTBOUNDDOORBELL_1 | OUTBOUNDDOORBELL_2 | OUTBOUNDDOORBELL_3 | OUTBOUNDDOORBELL_4);
- /*
- * First clear out all interrupts. Then enable the one's that we
- * can handle.
- */
- rx_writeb(dev, MUnit.OIMR, 0xff);
- rx_writel(dev, MUnit.ODR, 0xffffffff);
-// rx_writeb(dev, MUnit.OIMR, ~(u8)OUTBOUND_DOORBELL_INTERRUPT_MASK);
- rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
-
// We can only use a 32 bit address here
- rx_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa, &status);
+ rx_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa,
+ 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
}
/**
if (status & KERNEL_PANIC) {
char * buffer;
struct POSTSTATUS {
- u32 Post_Command;
- u32 Post_Address;
+ __le32 Post_Command;
+ __le32 Post_Address;
} * post;
dma_addr_t paddr, baddr;
int ret;
post->Post_Command = cpu_to_le32(COMMAND_POST_RESULTS);
post->Post_Address = cpu_to_le32(baddr);
rx_writel(dev, MUnit.IMRx[0], paddr);
- rx_sync_cmd(dev, COMMAND_POST_RESULTS, baddr, &status);
+ rx_sync_cmd(dev, COMMAND_POST_RESULTS, baddr, 0, 0, 0, 0, 0,
+ NULL, NULL, NULL, NULL, NULL);
pci_free_consistent(dev->pdev, sizeof(struct POSTSTATUS),
post, paddr);
- if ((buffer[0] == '0') && (buffer[1] == 'x')) {
+ if ((buffer[0] == '0') && ((buffer[1] == 'x') || (buffer[1] == 'X'))) {
ret = (buffer[2] <= '9') ? (buffer[2] - '0') : (buffer[2] - 'A' + 10);
ret <<= 4;
ret += (buffer[3] <= '9') ? (buffer[3] - '0') : (buffer[3] - 'A' + 10);
return 0;
}
+/**
+ * aac_rx_send
+ * @fib: fib to issue
+ *
+ * Will send a fib, returning 0 if successful.
+ */
+static int aac_rx_send(struct fib * fib)
+{
+ u64 addr = fib->hw_fib_pa;
+ struct aac_dev *dev = fib->dev;
+ volatile void __iomem *device = dev->regs.rx;
+ u32 Index;
+
+ dprintk((KERN_DEBUG "%p->aac_rx_send(%p->%llx)\n", dev, fib, addr));
+ Index = rx_readl(dev, MUnit.InboundQueue);
+ if (Index == 0xFFFFFFFFL)
+ Index = rx_readl(dev, MUnit.InboundQueue);
+ dprintk((KERN_DEBUG "Index = 0x%x\n", Index));
+ if (Index == 0xFFFFFFFFL)
+ return Index;
+ device += Index;
+ dprintk((KERN_DEBUG "entry = %x %x %u\n", (u32)(addr & 0xffffffff),
+ (u32)(addr >> 32), (u32)le16_to_cpu(fib->hw_fib->header.Size)));
+ writel((u32)(addr & 0xffffffff), device);
+ device += sizeof(u32);
+ writel((u32)(addr >> 32), device);
+ device += sizeof(u32);
+ writel(le16_to_cpu(fib->hw_fib->header.Size), device);
+ rx_writel(dev, MUnit.InboundQueue, Index);
+ dprintk((KERN_DEBUG "aac_rx_send - return 0\n"));
+ return 0;
+}
+
/**
* aac_rx_init - initialize an i960 based AAC card
* @dev: device to configure
name = dev->name;
/*
- * Map in the registers from the adapter.
+ * Check to see if the board panic'd while booting.
*/
- if((dev->regs.rx = ioremap((unsigned long)dev->scsi_host_ptr->base, 8192))==NULL)
- {
- printk(KERN_WARNING "aacraid: unable to map i960.\n" );
- return -1;
- }
/*
* Check to see if the board failed any self tests.
*/
dev->name, instance, status);
goto error_iounmap;
}
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(1);
+ schedule_timeout_uninterruptible(1);
}
if (request_irq(dev->scsi_host_ptr->irq, aac_rx_intr, SA_SHIRQ|SA_INTERRUPT, "aacraid", (void *)dev)<0)
{
* Fill in the function dispatch table.
*/
dev->a_ops.adapter_interrupt = aac_rx_interrupt_adapter;
+ dev->a_ops.adapter_disable_int = aac_rx_disable_interrupt;
dev->a_ops.adapter_notify = aac_rx_notify_adapter;
dev->a_ops.adapter_sync_cmd = rx_sync_cmd;
dev->a_ops.adapter_check_health = aac_rx_check_health;
+ dev->a_ops.adapter_send = aac_rx_send;
- if (aac_init_adapter(dev) == NULL)
- goto error_irq;
/*
- * Start any kernel threads needed
+ * First clear out all interrupts. Then enable the one's that we
+ * can handle.
*/
- dev->thread_pid = kernel_thread((int (*)(void *))aac_command_thread, dev, 0);
- if(dev->thread_pid < 0)
- {
- printk(KERN_ERR "aacraid: Unable to create rx thread.\n");
- goto error_kfree;
- }
+ rx_writeb(dev, MUnit.OIMR, 0xff);
+ rx_writel(dev, MUnit.ODR, 0xffffffff);
+ rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
+
+ if (aac_init_adapter(dev) == NULL)
+ goto error_irq;
+ if (dev->new_comm_interface)
+ rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
+
/*
* Tell the adapter that all is configured, and it can start
* accepting requests
aac_rx_start_adapter(dev);
return 0;
-error_kfree:
- kfree(dev->queues);
-
error_irq:
+ rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff);
free_irq(dev->scsi_host_ptr->irq, (void *)dev);
error_iounmap:
- iounmap(dev->regs.rx);
return -1;
}
git://git.onelab.eu / linux-2.6.git / blobdiff