--- /dev/null
+/*
+ * Aic94xx SAS/SATA driver hardware interface header file.
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef _AIC94XX_HWI_H_
+#define _AIC94XX_HWI_H_
+
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+
+#include <scsi/libsas.h>
+
+#include "aic94xx.h"
+#include "aic94xx_sas.h"
+
+/* Define ASD_MAX_PHYS to the maximum phys ever. Currently 8. */
+#define ASD_MAX_PHYS 8
+#define ASD_PCBA_SN_SIZE 12
+
+/* Those are to be further named properly, the "RAZORx" part, and
+ * subsequently included in include/linux/pci_ids.h.
+ */
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR10 0x410
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR12 0x412
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR1E 0x41E
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR1F 0x41F
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR30 0x430
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR32 0x432
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR3E 0x43E
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR3F 0x43F
+
+struct asd_ha_addrspace {
+ void __iomem *addr;
+ unsigned long start; /* pci resource start */
+ unsigned long len; /* pci resource len */
+ unsigned long flags; /* pci resource flags */
+
+ /* addresses internal to the host adapter */
+ u32 swa_base; /* mmspace 1 (MBAR1) uses this only */
+ u32 swb_base;
+ u32 swc_base;
+};
+
+struct bios_struct {
+ int present;
+ u8 maj;
+ u8 min;
+ u32 bld;
+};
+
+struct unit_element_struct {
+ u16 num;
+ u16 size;
+ void *area;
+};
+
+struct flash_struct {
+ u32 bar;
+ int present;
+ int wide;
+ u8 manuf;
+ u8 dev_id;
+ u8 sec_prot;
+
+ u32 dir_offs;
+};
+
+struct asd_phy_desc {
+ /* From CTRL-A settings, then set to what is appropriate */
+ u8 sas_addr[SAS_ADDR_SIZE];
+ u8 max_sas_lrate;
+ u8 min_sas_lrate;
+ u8 max_sata_lrate;
+ u8 min_sata_lrate;
+ u8 flags;
+#define ASD_CRC_DIS 1
+#define ASD_SATA_SPINUP_HOLD 2
+
+ u8 phy_control_0; /* mode 5 reg 0x160 */
+ u8 phy_control_1; /* mode 5 reg 0x161 */
+ u8 phy_control_2; /* mode 5 reg 0x162 */
+ u8 phy_control_3; /* mode 5 reg 0x163 */
+};
+
+struct asd_dma_tok {
+ void *vaddr;
+ dma_addr_t dma_handle;
+ size_t size;
+};
+
+struct hw_profile {
+ struct bios_struct bios;
+ struct unit_element_struct ue;
+ struct flash_struct flash;
+
+ u8 sas_addr[SAS_ADDR_SIZE];
+ char pcba_sn[ASD_PCBA_SN_SIZE+1];
+
+ u8 enabled_phys; /* mask of enabled phys */
+ struct asd_phy_desc phy_desc[ASD_MAX_PHYS];
+ u32 max_scbs; /* absolute sequencer scb queue size */
+ struct asd_dma_tok *scb_ext;
+ u32 max_ddbs;
+ struct asd_dma_tok *ddb_ext;
+
+ spinlock_t ddb_lock;
+ void *ddb_bitmap;
+
+ int num_phys; /* ENABLEABLE */
+ int max_phys; /* REPORTED + ENABLEABLE */
+
+ unsigned addr_range; /* max # of addrs; max # of possible ports */
+ unsigned port_name_base;
+ unsigned dev_name_base;
+ unsigned sata_name_base;
+};
+
+struct asd_ascb {
+ struct list_head list;
+ struct asd_ha_struct *ha;
+
+ struct scb *scb; /* equals dma_scb->vaddr */
+ struct asd_dma_tok dma_scb;
+ struct asd_dma_tok *sg_arr;
+
+ void (*tasklet_complete)(struct asd_ascb *, struct done_list_struct *);
+ u8 uldd_timer:1;
+
+ /* internally generated command */
+ struct timer_list timer;
+ struct completion completion;
+ u8 tag_valid:1;
+ __be16 tag; /* error recovery only */
+
+ /* If this is an Empty SCB, index of first edb in seq->edb_arr. */
+ int edb_index;
+
+ /* Used by the timer timeout function. */
+ int tc_index;
+
+ void *uldd_task;
+};
+
+#define ASD_DL_SIZE_BITS 0x8
+#define ASD_DL_SIZE (1<<(2+ASD_DL_SIZE_BITS))
+#define ASD_DEF_DL_TOGGLE 0x01
+
+struct asd_seq_data {
+ spinlock_t pend_q_lock;
+ u16 scbpro;
+ int pending;
+ struct list_head pend_q;
+ int can_queue; /* per adapter */
+ struct asd_dma_tok next_scb; /* next scb to be delivered to CSEQ */
+
+ spinlock_t tc_index_lock;
+ void **tc_index_array;
+ void *tc_index_bitmap;
+ int tc_index_bitmap_bits;
+
+ struct tasklet_struct dl_tasklet;
+ struct done_list_struct *dl; /* array of done list entries, equals */
+ struct asd_dma_tok *actual_dl; /* actual_dl->vaddr */
+ int dl_toggle;
+ int dl_next;
+
+ int num_edbs;
+ struct asd_dma_tok **edb_arr;
+ int num_escbs;
+ struct asd_ascb **escb_arr; /* array of pointers to escbs */
+};
+
+/* This is an internal port structure. These are used to get accurate
+ * phy_mask for updating DDB 0.
+ */
+struct asd_port {
+ u8 sas_addr[SAS_ADDR_SIZE];
+ u8 attached_sas_addr[SAS_ADDR_SIZE];
+ u32 phy_mask;
+ int num_phys;
+};
+
+/* This is the Host Adapter structure. It describes the hardware
+ * SAS adapter.
+ */
+struct asd_ha_struct {
+ struct pci_dev *pcidev;
+ const char *name;
+
+ struct sas_ha_struct sas_ha;
+
+ u8 revision_id;
+
+ int iospace;
+ spinlock_t iolock;
+ struct asd_ha_addrspace io_handle[2];
+
+ struct hw_profile hw_prof;
+
+ struct asd_phy phys[ASD_MAX_PHYS];
+ spinlock_t asd_ports_lock;
+ struct asd_port asd_ports[ASD_MAX_PHYS];
+ struct asd_sas_port ports[ASD_MAX_PHYS];
+
+ struct dma_pool *scb_pool;
+
+ struct asd_seq_data seq; /* sequencer related */
+};
+
+/* ---------- Common macros ---------- */
+
+#define ASD_BUSADDR_LO(__dma_handle) ((u32)(__dma_handle))
+#define ASD_BUSADDR_HI(__dma_handle) (((sizeof(dma_addr_t))==8) \
+ ? ((u32)((__dma_handle) >> 32)) \
+ : ((u32)0))
+
+#define dev_to_asd_ha(__dev) pci_get_drvdata(to_pci_dev(__dev))
+#define SCB_SITE_VALID(__site_no) (((__site_no) & 0xF0FF) != 0x00FF \
+ && ((__site_no) & 0xF0FF) > 0x001F)
+/* For each bit set in __lseq_mask, set __lseq to equal the bit
+ * position of the set bit and execute the statement following.
+ * __mc is the temporary mask, used as a mask "counter".
+ */
+#define for_each_sequencer(__lseq_mask, __mc, __lseq) \
+ for ((__mc)=(__lseq_mask),(__lseq)=0;(__mc)!=0;(__lseq++),(__mc)>>=1)\
+ if (((__mc) & 1))
+#define for_each_phy(__lseq_mask, __mc, __lseq) \
+ for ((__mc)=(__lseq_mask),(__lseq)=0;(__mc)!=0;(__lseq++),(__mc)>>=1)\
+ if (((__mc) & 1))
+
+#define PHY_ENABLED(_HA, _I) ((_HA)->hw_prof.enabled_phys & (1<<(_I)))
+
+/* ---------- DMA allocs ---------- */
+
+static inline struct asd_dma_tok *asd_dmatok_alloc(gfp_t flags)
+{
+ return kmem_cache_alloc(asd_dma_token_cache, flags);
+}
+
+static inline void asd_dmatok_free(struct asd_dma_tok *token)
+{
+ kmem_cache_free(asd_dma_token_cache, token);
+}
+
+static inline struct asd_dma_tok *asd_alloc_coherent(struct asd_ha_struct *
+ asd_ha, size_t size,
+ gfp_t flags)
+{
+ struct asd_dma_tok *token = asd_dmatok_alloc(flags);
+ if (token) {
+ token->size = size;
+ token->vaddr = dma_alloc_coherent(&asd_ha->pcidev->dev,
+ token->size,
+ &token->dma_handle,
+ flags);
+ if (!token->vaddr) {
+ asd_dmatok_free(token);
+ token = NULL;
+ }
+ }
+ return token;
+}
+
+static inline void asd_free_coherent(struct asd_ha_struct *asd_ha,
+ struct asd_dma_tok *token)
+{
+ if (token) {
+ dma_free_coherent(&asd_ha->pcidev->dev, token->size,
+ token->vaddr, token->dma_handle);
+ asd_dmatok_free(token);
+ }
+}
+
+static inline void asd_init_ascb(struct asd_ha_struct *asd_ha,
+ struct asd_ascb *ascb)
+{
+ INIT_LIST_HEAD(&ascb->list);
+ ascb->scb = ascb->dma_scb.vaddr;
+ ascb->ha = asd_ha;
+ ascb->timer.function = NULL;
+ init_timer(&ascb->timer);
+ ascb->tc_index = -1;
+ init_completion(&ascb->completion);
+}
+
+/* Must be called with the tc_index_lock held!
+ */
+static inline void asd_tc_index_release(struct asd_seq_data *seq, int index)
+{
+ seq->tc_index_array[index] = NULL;
+ clear_bit(index, seq->tc_index_bitmap);
+}
+
+/* Must be called with the tc_index_lock held!
+ */
+static inline int asd_tc_index_get(struct asd_seq_data *seq, void *ptr)
+{
+ int index;
+
+ index = find_first_zero_bit(seq->tc_index_bitmap,
+ seq->tc_index_bitmap_bits);
+ if (index == seq->tc_index_bitmap_bits)
+ return -1;
+
+ seq->tc_index_array[index] = ptr;
+ set_bit(index, seq->tc_index_bitmap);
+
+ return index;
+}
+
+/* Must be called with the tc_index_lock held!
+ */
+static inline void *asd_tc_index_find(struct asd_seq_data *seq, int index)
+{
+ return seq->tc_index_array[index];
+}
+
+/**
+ * asd_ascb_free -- free a single aSCB after is has completed
+ * @ascb: pointer to the aSCB of interest
+ *
+ * This frees an aSCB after it has been executed/completed by
+ * the sequencer.
+ */
+static inline void asd_ascb_free(struct asd_ascb *ascb)
+{
+ if (ascb) {
+ struct asd_ha_struct *asd_ha = ascb->ha;
+ unsigned long flags;
+
+ BUG_ON(!list_empty(&ascb->list));
+ spin_lock_irqsave(&ascb->ha->seq.tc_index_lock, flags);
+ asd_tc_index_release(&ascb->ha->seq, ascb->tc_index);
+ spin_unlock_irqrestore(&ascb->ha->seq.tc_index_lock, flags);
+ dma_pool_free(asd_ha->scb_pool, ascb->dma_scb.vaddr,
+ ascb->dma_scb.dma_handle);
+ kmem_cache_free(asd_ascb_cache, ascb);
+ }
+}
+
+/**
+ * asd_ascb_list_free -- free a list of ascbs
+ * @ascb_list: a list of ascbs
+ *
+ * This function will free a list of ascbs allocated by asd_ascb_alloc_list.
+ * It is used when say the scb queueing function returned QUEUE_FULL,
+ * and we do not need the ascbs any more.
+ */
+static inline void asd_ascb_free_list(struct asd_ascb *ascb_list)
+{
+ LIST_HEAD(list);
+ struct list_head *n, *pos;
+
+ __list_add(&list, ascb_list->list.prev, &ascb_list->list);
+ list_for_each_safe(pos, n, &list) {
+ list_del_init(pos);
+ asd_ascb_free(list_entry(pos, struct asd_ascb, list));
+ }
+}
+
+/* ---------- Function declarations ---------- */
+
+int asd_init_hw(struct asd_ha_struct *asd_ha);
+irqreturn_t asd_hw_isr(int irq, void *dev_id);
+
+
+struct asd_ascb *asd_ascb_alloc_list(struct asd_ha_struct
+ *asd_ha, int *num,
+ gfp_t gfp_mask);
+
+int asd_post_ascb_list(struct asd_ha_struct *asd_ha, struct asd_ascb *ascb,
+ int num);
+int asd_post_escb_list(struct asd_ha_struct *asd_ha, struct asd_ascb *ascb,
+ int num);
+
+int asd_init_post_escbs(struct asd_ha_struct *asd_ha);
+void asd_build_control_phy(struct asd_ascb *ascb, int phy_id, u8 subfunc);
+void asd_control_led(struct asd_ha_struct *asd_ha, int phy_id, int op);
+void asd_turn_led(struct asd_ha_struct *asd_ha, int phy_id, int op);
+int asd_enable_phys(struct asd_ha_struct *asd_ha, const u8 phy_mask);
+void asd_build_initiate_link_adm_task(struct asd_ascb *ascb, int phy_id,
+ u8 subfunc);
+
+void asd_ascb_timedout(unsigned long data);
+int asd_chip_hardrst(struct asd_ha_struct *asd_ha);
+
+#endif
git://git.onelab.eu / linux-2.6.git / blobdiff