ata_wait_idle(ap);
}
+
+/**
+ * ata_tf_load - send taskfile registers to host controller
+ * @ap: Port to which output is sent
+ * @tf: ATA taskfile register set
+ *
+ * Outputs ATA taskfile to standard ATA host controller using MMIO
+ * or PIO as indicated by the ATA_FLAG_MMIO flag.
+ * Writes the control, feature, nsect, lbal, lbam, and lbah registers.
+ * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect,
+ * hob_lbal, hob_lbam, and hob_lbah.
+ *
+ * This function waits for idle (!BUSY and !DRQ) after writing
+ * registers. If the control register has a new value, this
+ * function also waits for idle after writing control and before
+ * writing the remaining registers.
+ *
+ * May be used as the tf_load() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
{
if (ap->flags & ATA_FLAG_MMIO)
}
/**
- * ata_exec_command - issue ATA command to host controller
+ * ata_exec_command_pio - issue ATA command to host controller
* @ap: port to which command is being issued
* @tf: ATA taskfile register set
*
- * Issues PIO/MMIO write to ATA command register, with proper
+ * Issues PIO write to ATA command register, with proper
* synchronization with interrupt handler / other threads.
*
* LOCKING:
ata_pause(ap);
}
+
+/**
+ * ata_exec_command - issue ATA command to host controller
+ * @ap: port to which command is being issued
+ * @tf: ATA taskfile register set
+ *
+ * Issues PIO/MMIO write to ATA command register, with proper
+ * synchronization with interrupt handler / other threads.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf)
{
if (ap->flags & ATA_FLAG_MMIO)
}
/**
- * ata_tf_read - input device's ATA taskfile shadow registers
+ * ata_tf_read_pio - input device's ATA taskfile shadow registers
* @ap: Port from which input is read
* @tf: ATA taskfile register set for storing input
*
}
}
+
+/**
+ * ata_tf_read - input device's ATA taskfile shadow registers
+ * @ap: Port from which input is read
+ * @tf: ATA taskfile register set for storing input
+ *
+ * Reads ATA taskfile registers for currently-selected device
+ * into @tf.
+ *
+ * Reads nsect, lbal, lbam, lbah, and device. If ATA_TFLAG_LBA48
+ * is set, also reads the hob registers.
+ *
+ * May be used as the tf_read() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
if (ap->flags & ATA_FLAG_MMIO)
* @ap: port where the device is
*
* Reads ATA taskfile status register for currently-selected device
- * and return it's value. This also clears pending interrupts
+ * and return its value. This also clears pending interrupts
* from this device
*
* LOCKING:
* @ap: port where the device is
*
* Reads ATA taskfile status register for currently-selected device
- * via MMIO and return it's value. This also clears pending interrupts
+ * via MMIO and return its value. This also clears pending interrupts
* from this device
*
* LOCKING:
return readb((void __iomem *) ap->ioaddr.status_addr);
}
+
+/**
+ * ata_check_status - Read device status reg & clear interrupt
+ * @ap: port where the device is
+ *
+ * Reads ATA taskfile status register for currently-selected device
+ * and return its value. This also clears pending interrupts
+ * from this device
+ *
+ * May be used as the check_status() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
u8 ata_check_status(struct ata_port *ap)
{
if (ap->flags & ATA_FLAG_MMIO)
return ata_check_status_pio(ap);
}
+
+/**
+ * ata_altstatus - Read device alternate status reg
+ * @ap: port where the device is
+ *
+ * Reads ATA taskfile alternate status register for
+ * currently-selected device and return its value.
+ *
+ * Note: may NOT be used as the check_altstatus() entry in
+ * ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
u8 ata_altstatus(struct ata_port *ap)
{
if (ap->ops->check_altstatus)
return inb(ap->ioaddr.altstatus_addr);
}
+
+/**
+ * ata_chk_err - Read device error reg
+ * @ap: port where the device is
+ *
+ * Reads ATA taskfile error register for
+ * currently-selected device and return its value.
+ *
+ * Note: may NOT be used as the check_err() entry in
+ * ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
u8 ata_chk_err(struct ata_port *ap)
{
if (ap->ops->check_err)
}
}
+
+/**
+ * ata_noop_dev_select - Select device 0/1 on ATA bus
+ * @ap: ATA channel to manipulate
+ * @device: ATA device (numbered from zero) to select
+ *
+ * This function performs no actual function.
+ *
+ * May be used as the dev_select() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * caller.
+ */
void ata_noop_dev_select (struct ata_port *ap, unsigned int device)
{
}
+
/**
* ata_std_dev_select - Select device 0/1 on ATA bus
* @ap: ATA channel to manipulate
*
* Use the method defined in the ATA specification to
* make either device 0, or device 1, active on the
- * ATA channel.
+ * ATA channel. Works with both PIO and MMIO.
+ *
+ * May be used as the dev_select() entry in ata_port_operations.
*
* LOCKING:
* caller.
* ata_bus_probe - Reset and probe ATA bus
* @ap: Bus to probe
*
+ * Master ATA bus probing function. Initiates a hardware-dependent
+ * bus reset, then attempts to identify any devices found on
+ * the bus.
+ *
* LOCKING:
+ * PCI/etc. bus probe sem.
*
* RETURNS:
* Zero on success, non-zero on error.
}
/**
- * ata_port_probe -
- * @ap:
+ * ata_port_probe - Mark port as enabled
+ * @ap: Port for which we indicate enablement
*
- * LOCKING:
+ * Modify @ap data structure such that the system
+ * thinks that the entire port is enabled.
+ *
+ * LOCKING: host_set lock, or some other form of
+ * serialization.
*/
void ata_port_probe(struct ata_port *ap)
}
/**
- * __sata_phy_reset -
- * @ap:
+ * __sata_phy_reset - Wake/reset a low-level SATA PHY
+ * @ap: SATA port associated with target SATA PHY.
+ *
+ * This function issues commands to standard SATA Sxxx
+ * PHY registers, to wake up the phy (and device), and
+ * clear any reset condition.
*
* LOCKING:
+ * PCI/etc. bus probe sem.
*
*/
void __sata_phy_reset(struct ata_port *ap)
unsigned long timeout = jiffies + (HZ * 5);
if (ap->flags & ATA_FLAG_SATA_RESET) {
- scr_write(ap, SCR_CONTROL, 0x301); /* issue phy wake/reset */
- scr_read(ap, SCR_STATUS); /* dummy read; flush */
+ /* issue phy wake/reset */
+ scr_write_flush(ap, SCR_CONTROL, 0x301);
udelay(400); /* FIXME: a guess */
}
- scr_write(ap, SCR_CONTROL, 0x300); /* issue phy wake/clear reset */
+ scr_write_flush(ap, SCR_CONTROL, 0x300); /* phy wake/clear reset */
/* wait for phy to become ready, if necessary */
do {
}
/**
- * __sata_phy_reset -
- * @ap:
+ * sata_phy_reset - Reset SATA bus.
+ * @ap: SATA port associated with target SATA PHY.
+ *
+ * This function resets the SATA bus, and then probes
+ * the bus for devices.
*
* LOCKING:
+ * PCI/etc. bus probe sem.
*
*/
void sata_phy_reset(struct ata_port *ap)
}
/**
- * ata_port_disable -
- * @ap:
+ * ata_port_disable - Disable port.
+ * @ap: Port to be disabled.
*
- * LOCKING:
+ * Modify @ap data structure such that the system
+ * thinks that the entire port is disabled, and should
+ * never attempt to probe or communicate with devices
+ * on this port.
+ *
+ * LOCKING: host_set lock, or some other form of
+ * serialization.
*/
void ata_port_disable(struct ata_port *ap)
* ata_set_mode - Program timings and issue SET FEATURES - XFER
* @ap: port on which timings will be programmed
*
+ * Set ATA device disk transfer mode (PIO3, UDMA6, etc.).
+ *
* LOCKING:
+ * PCI/etc. bus probe sem.
*
*/
static void ata_set_mode(struct ata_port *ap)
* @tmout_pat: impatience timeout
* @tmout: overall timeout
*
- * LOCKING:
+ * Sleep until ATA Status register bit BSY clears,
+ * or a timeout occurs.
+ *
+ * LOCKING: None.
*
*/
}
/**
- * ata_bus_edd -
- * @ap:
+ * ata_bus_edd - Issue EXECUTE DEVICE DIAGNOSTIC command.
+ * @ap: Port to reset and probe
+ *
+ * Use the EXECUTE DEVICE DIAGNOSTIC command to reset and
+ * probe the bus. Not often used these days.
*
* LOCKING:
+ * PCI/etc. bus probe sem.
*
*/
* the device is ATA or ATAPI.
*
* LOCKING:
- * Inherited from caller. Some functions called by this function
- * obtain the host_set lock.
+ * PCI/etc. bus probe sem.
+ * Obtains host_set lock.
*
* SIDE EFFECTS:
* Sets ATA_FLAG_PORT_DISABLED if bus reset fails.
* @xfer_mode_out: (output) SET FEATURES - XFER MODE code
* @xfer_shift_out: (output) bit shift that selects this mode
*
+ * Based on host and device capabilities, determine the
+ * maximum transfer mode that is amenable to all.
+ *
* LOCKING:
+ * PCI/etc. bus probe sem.
*
* RETURNS:
* Zero on success, negative on error.
* @ap: Port associated with device @dev
* @dev: Device to which command will be sent
*
+ * Issue SET FEATURES - XFER MODE command to device @dev
+ * on port @ap.
+ *
* LOCKING:
+ * PCI/etc. bus probe sem.
*/
static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev)
}
/**
- * ata_sg_clean -
- * @qc:
+ * ata_sg_clean - Unmap DMA memory associated with command
+ * @qc: Command containing DMA memory to be released
+ *
+ * Unmap all mapped DMA memory associated with this command.
*
* LOCKING:
+ * spin_lock_irqsave(host_set lock)
*/
static void ata_sg_clean(struct ata_queued_cmd *qc)
* ata_fill_sg - Fill PCI IDE PRD table
* @qc: Metadata associated with taskfile to be transferred
*
+ * Fill PCI IDE PRD (scatter-gather) table with segments
+ * associated with the current disk command.
+ *
* LOCKING:
+ * spin_lock_irqsave(host_set lock)
*
*/
static void ata_fill_sg(struct ata_queued_cmd *qc)
* ata_check_atapi_dma - Check whether ATAPI DMA can be supported
* @qc: Metadata associated with taskfile to check
*
+ * Allow low-level driver to filter ATA PACKET commands, returning
+ * a status indicating whether or not it is OK to use DMA for the
+ * supplied PACKET command.
+ *
* LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ *
* RETURNS: 0 when ATAPI DMA can be used
* nonzero otherwise
*/
* ata_qc_prep - Prepare taskfile for submission
* @qc: Metadata associated with taskfile to be prepared
*
+ * Prepare ATA taskfile for submission.
+ *
* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
ata_fill_sg(qc);
}
+/**
+ * ata_sg_init_one - Associate command with memory buffer
+ * @qc: Command to be associated
+ * @buf: Memory buffer
+ * @buflen: Length of memory buffer, in bytes.
+ *
+ * Initialize the data-related elements of queued_cmd @qc
+ * to point to a single memory buffer, @buf of byte length @buflen.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+
+
+
+/**
+ * ata_sg_init_one - Prepare a one-entry scatter-gather list.
+ * @qc: Queued command
+ * @buf: transfer buffer
+ * @buflen: length of buf
+ *
+ * Builds a single-entry scatter-gather list to initiate a
+ * transfer utilizing the specified buffer.
+ *
+ * LOCKING:
+ */
void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen)
{
struct scatterlist *sg;
sg = qc->sg;
sg->page = virt_to_page(buf);
sg->offset = (unsigned long) buf & ~PAGE_MASK;
- sg_dma_len(sg) = buflen;
+ sg->length = buflen;
}
+/**
+ * ata_sg_init - Associate command with scatter-gather table.
+ * @qc: Command to be associated
+ * @sg: Scatter-gather table.
+ * @n_elem: Number of elements in s/g table.
+ *
+ * Initialize the data-related elements of queued_cmd @qc
+ * to point to a scatter-gather table @sg, containing @n_elem
+ * elements.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+
+
+/**
+ * ata_sg_init - Assign a scatter gather list to a queued command
+ * @qc: Queued command
+ * @sg: Scatter-gather list
+ * @n_elem: length of sg list
+ *
+ * Attaches a scatter-gather list to a queued command.
+ *
+ * LOCKING:
+ */
+
void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
unsigned int n_elem)
{
}
/**
- * ata_sg_setup_one -
- * @qc:
+ * ata_sg_setup_one - DMA-map the memory buffer associated with a command.
+ * @qc: Command with memory buffer to be mapped.
+ *
+ * DMA-map the memory buffer associated with queued_cmd @qc.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*
* RETURNS:
- *
+ * Zero on success, negative on error.
*/
static int ata_sg_setup_one(struct ata_queued_cmd *qc)
dma_addr_t dma_address;
dma_address = dma_map_single(ap->host_set->dev, qc->buf_virt,
- sg_dma_len(sg), dir);
+ sg->length, dir);
if (dma_mapping_error(dma_address))
return -1;
sg_dma_address(sg) = dma_address;
+ sg_dma_len(sg) = sg->length;
DPRINTK("mapped buffer of %d bytes for %s\n", sg_dma_len(sg),
qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
}
/**
- * ata_sg_setup -
- * @qc:
+ * ata_sg_setup - DMA-map the scatter-gather table associated with a command.
+ * @qc: Command with scatter-gather table to be mapped.
+ *
+ * DMA-map the scatter-gather table associated with queued_cmd @qc.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*
* RETURNS:
+ * Zero on success, negative on error.
*
*/
* @ap:
*
* LOCKING:
+ * None. (executing in kernel thread context)
*
* RETURNS:
*
* @ap:
*
* LOCKING:
+ * None. (executing in kernel thread context)
*/
static void ata_pio_complete (struct ata_port *ap)
ata_qc_complete(qc, drv_stat);
}
+
+/**
+ * swap_buf_le16 -
+ * @buf: Buffer to swap
+ * @buf_words: Number of 16-bit words in buffer.
+ *
+ * Swap halves of 16-bit words if needed to convert from
+ * little-endian byte order to native cpu byte order, or
+ * vice-versa.
+ *
+ * LOCKING:
+ */
void swap_buf_le16(u16 *buf, unsigned int buf_words)
{
#ifdef __BIG_ENDIAN
qc->cursect++;
qc->cursg_ofs++;
- if ((qc->cursg_ofs * ATA_SECT_SIZE) == sg_dma_len(&sg[qc->cursg])) {
+ if ((qc->cursg_ofs * ATA_SECT_SIZE) == (&sg[qc->cursg])->length) {
qc->cursg++;
qc->cursg_ofs = 0;
}
next_sg:
sg = &qc->sg[qc->cursg];
-next_page:
page = sg->page;
offset = sg->offset + qc->cursg_ofs;
page = nth_page(page, (offset >> PAGE_SHIFT));
offset %= PAGE_SIZE;
- count = min(sg_dma_len(sg) - qc->cursg_ofs, bytes);
+ /* don't overrun current sg */
+ count = min(sg->length - qc->cursg_ofs, bytes);
/* don't cross page boundaries */
count = min(count, (unsigned int)PAGE_SIZE - offset);
qc->curbytes += count;
qc->cursg_ofs += count;
- if (qc->cursg_ofs == sg_dma_len(sg)) {
+ if (qc->cursg_ofs == sg->length) {
qc->cursg++;
qc->cursg_ofs = 0;
}
kunmap(page);
if (bytes) {
- if (qc->cursg_ofs < sg_dma_len(sg))
- goto next_page;
goto next_sg;
}
}
* @ap:
*
* LOCKING:
+ * None. (executing in kernel thread context)
*/
static void ata_pio_block(struct ata_port *ap)
ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer));
qc->dma_dir = DMA_FROM_DEVICE;
- memset(&qc->cdb, 0, sizeof(ap->cdb_len));
+ memset(&qc->cdb, 0, ap->cdb_len);
qc->cdb[0] = REQUEST_SENSE;
qc->cdb[4] = SCSI_SENSE_BUFFERSIZE;
* transaction completed successfully.
*
* LOCKING:
+ * Inherited from SCSI layer (none, can sleep)
*/
static void ata_qc_timeout(struct ata_queued_cmd *qc)
* @dev: Device from whom we request an available command structure
*
* LOCKING:
+ * None.
*/
static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
* @dev: Device from whom we request an available command structure
*
* LOCKING:
+ * None.
*/
struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
* in case something prevents using it.
*
* LOCKING:
+ * spin_lock_irqsave(host_set lock)
*
*/
void ata_qc_free(struct ata_queued_cmd *qc)
/**
* ata_qc_complete - Complete an active ATA command
* @qc: Command to complete
- * @drv_stat: ATA status register contents
+ * @drv_stat: ATA Status register contents
+ *
+ * Indicate to the mid and upper layers that an ATA
+ * command has completed, with either an ok or not-ok status.
*
* LOCKING:
+ * spin_lock_irqsave(host_set lock)
*
*/
/* call completion callback */
rc = qc->complete_fn(qc, drv_stat);
+ qc->flags &= ~ATA_QCFLAG_ACTIVE;
/* if callback indicates not to complete command (non-zero),
* return immediately
return -1;
}
+
/**
* ata_qc_issue_prot - issue taskfile to device in proto-dependent manner
* @qc: command to issue to device
* classes called "protocols", and issuing each type of protocol
* is slightly different.
*
+ * May be used as the qc_issue() entry in ata_port_operations.
+ *
* LOCKING:
* spin_lock_irqsave(host_set lock)
*
}
/**
- * ata_bmdma_setup - Set up PCI IDE BMDMA transaction
+ * ata_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction
* @qc: Info associated with this ATA transaction.
*
* LOCKING:
ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
}
+
+/**
+ * ata_bmdma_start - Start a PCI IDE BMDMA transaction
+ * @qc: Info associated with this ATA transaction.
+ *
+ * Writes the ATA_DMA_START flag to the DMA command register.
+ *
+ * May be used as the bmdma_start() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
void ata_bmdma_start(struct ata_queued_cmd *qc)
{
if (qc->ap->flags & ATA_FLAG_MMIO)
ata_bmdma_start_pio(qc);
}
+
+/**
+ * ata_bmdma_setup - Set up PCI IDE BMDMA transaction
+ * @qc: Info associated with this ATA transaction.
+ *
+ * Writes address of PRD table to device's PRD Table Address
+ * register, sets the DMA control register, and calls
+ * ops->exec_command() to start the transfer.
+ *
+ * May be used as the bmdma_setup() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
void ata_bmdma_setup(struct ata_queued_cmd *qc)
{
if (qc->ap->flags & ATA_FLAG_MMIO)
ata_bmdma_setup_pio(qc);
}
+
+/**
+ * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
+ * @ap: Port associated with this ATA transaction.
+ *
+ * Clear interrupt and error flags in DMA status register.
+ *
+ * May be used as the irq_clear() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+
void ata_bmdma_irq_clear(struct ata_port *ap)
{
if (ap->flags & ATA_FLAG_MMIO) {
}
+
+/**
+ * ata_bmdma_status - Read PCI IDE BMDMA status
+ * @ap: Port associated with this ATA transaction.
+ *
+ * Read and return BMDMA status register.
+ *
+ * May be used as the bmdma_status() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+
u8 ata_bmdma_status(struct ata_port *ap)
{
u8 host_stat;
return host_stat;
}
+
+/**
+ * ata_bmdma_stop - Stop PCI IDE BMDMA transfer
+ * @ap: Port associated with this ATA transaction.
+ *
+ * Clears the ATA_DMA_START flag in the dma control register
+ *
+ * May be used as the bmdma_stop() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+
void ata_bmdma_stop(struct ata_port *ap)
{
if (ap->flags & ATA_FLAG_MMIO) {
/**
* ata_interrupt - Default ATA host interrupt handler
- * @irq: irq line
- * @dev_instance: pointer to our host information structure
+ * @irq: irq line (unused)
+ * @dev_instance: pointer to our ata_host_set information structure
* @regs: unused
*
+ * Default interrupt handler for PCI IDE devices. Calls
+ * ata_host_intr() for each port that is not disabled.
+ *
* LOCKING:
+ * Obtains host_set lock during operation.
*
* RETURNS:
+ * IRQ_NONE or IRQ_HANDLED.
*
*/
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->active_tag);
- if (qc && (!(qc->tf.ctl & ATA_NIEN)))
+ if (qc && (!(qc->tf.ctl & ATA_NIEN)) &&
+ (qc->flags & ATA_QCFLAG_ACTIVE))
handled |= ata_host_intr(ap, qc);
}
}
ata_qc_complete(qc, ATA_ERR);
}
+
+/**
+ * ata_port_start - Set port up for dma.
+ * @ap: Port to initialize
+ *
+ * Called just after data structures for each port are
+ * initialized. Allocates space for PRD table.
+ *
+ * May be used as the port_start() entry in ata_port_operations.
+ *
+ * LOCKING:
+ */
+
int ata_port_start (struct ata_port *ap)
{
struct device *dev = ap->host_set->dev;
return 0;
}
+
+/**
+ * ata_port_stop - Undo ata_port_start()
+ * @ap: Port to shut down
+ *
+ * Frees the PRD table.
+ *
+ * May be used as the port_stop() entry in ata_port_operations.
+ *
+ * LOCKING:
+ */
+
void ata_port_stop (struct ata_port *ap)
{
struct device *dev = ap->host_set->dev;
dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma);
}
+void ata_host_stop (struct ata_host_set *host_set)
+{
+ if (host_set->mmio_base)
+ iounmap(host_set->mmio_base);
+}
+
+
/**
* ata_host_remove - Unregister SCSI host structure with upper layers
* @ap: Port to unregister
* @ent: Probe information provided by low-level driver
* @port_no: Port number associated with this ata_port
*
+ * Initialize a new ata_port structure, and its associated
+ * scsi_host.
+ *
* LOCKING:
+ * Inherited from caller.
*
*/
* @host_set: Collections of ports to which we add
* @port_no: Port number associated with this host
*
+ * Attach low-level ATA driver to system.
+ *
* LOCKING:
+ * PCI/etc. bus probe sem.
*
* RETURNS:
+ * New ata_port on success, for NULL on error.
*
*/
}
/**
- * ata_device_add -
- * @ent:
+ * ata_device_add - Register hardware device with ATA and SCSI layers
+ * @ent: Probe information describing hardware device to be registered
+ *
+ * This function processes the information provided in the probe
+ * information struct @ent, allocates the necessary ATA and SCSI
+ * host information structures, initializes them, and registers
+ * everything with requisite kernel subsystems.
+ *
+ * This function requests irqs, probes the ATA bus, and probes
+ * the SCSI bus.
*
* LOCKING:
+ * PCI/etc. bus probe sem.
*
* RETURNS:
+ * Number of ports registered. Zero on error (no ports registered).
*
*/
/**
* ata_std_ports - initialize ioaddr with standard port offsets.
* @ioaddr: IO address structure to be initialized
+ *
+ * Utility function which initializes data_addr, error_addr,
+ * feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr,
+ * device_addr, status_addr, and command_addr to standard offsets
+ * relative to cmd_addr.
+ *
+ * Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr.
*/
+
void ata_std_ports(struct ata_ioports *ioaddr)
{
ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA;
return probe_ent;
}
+
+
+/**
+ * ata_pci_init_native_mode - Initialize native-mode driver
+ * @pdev: pci device to be initialized
+ * @port: array[2] of pointers to port info structures.
+ *
+ * Utility function which allocates and initializes an
+ * ata_probe_ent structure for a standard dual-port
+ * PIO-based IDE controller. The returned ata_probe_ent
+ * structure can be passed to ata_device_add(). The returned
+ * ata_probe_ent structure should then be freed with kfree().
+ */
+
#ifdef CONFIG_PCI
struct ata_probe_ent *
ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port)
* @port_info: Information from low-level host driver
* @n_ports: Number of ports attached to host controller
*
+ * This is a helper function which can be called from a driver's
+ * xxx_init_one() probe function if the hardware uses traditional
+ * IDE taskfile registers.
+ *
+ * This function calls pci_enable_device(), reserves its register
+ * regions, sets the dma mask, enables bus master mode, and calls
+ * ata_device_add()
+ *
* LOCKING:
* Inherited from PCI layer (may sleep).
*
* RETURNS:
+ * Zero on success, negative on errno-based value on error.
*
*/
}
free_irq(host_set->irq, host_set);
- if (host_set->ops->host_stop)
- host_set->ops->host_stop(host_set);
- if (host_set->mmio_base)
- iounmap(host_set->mmio_base);
for (i = 0; i < host_set->n_ports; i++) {
ap = host_set->ports[i];
ata_scsi_release(ap->host);
- scsi_host_put(ap->host);
- }
-
- pci_release_regions(pdev);
-
- for (i = 0; i < host_set->n_ports; i++) {
- struct ata_ioports *ioaddr;
-
- ap = host_set->ports[i];
- ioaddr = &ap->ioaddr;
if ((ap->flags & ATA_FLAG_NO_LEGACY) == 0) {
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+
if (ioaddr->cmd_addr == 0x1f0)
release_region(0x1f0, 8);
else if (ioaddr->cmd_addr == 0x170)
release_region(0x170, 8);
}
+
+ scsi_host_put(ap->host);
}
+ if (host_set->ops->host_stop)
+ host_set->ops->host_stop(host_set);
+
kfree(host_set);
+
+ pci_release_regions(pdev);
pci_disable_device(pdev);
dev_set_drvdata(dev, NULL);
}
#endif /* CONFIG_PCI */
-/**
- * ata_init -
- *
- * LOCKING:
- *
- * RETURNS:
- *
- */
-
static int __init ata_init(void)
{
ata_wq = create_workqueue("ata");
EXPORT_SYMBOL_GPL(ata_exec_command);
EXPORT_SYMBOL_GPL(ata_port_start);
EXPORT_SYMBOL_GPL(ata_port_stop);
+EXPORT_SYMBOL_GPL(ata_host_stop);
EXPORT_SYMBOL_GPL(ata_interrupt);
EXPORT_SYMBOL_GPL(ata_qc_prep);
EXPORT_SYMBOL_GPL(ata_bmdma_setup);
git://git.onelab.eu / linux-2.6.git / blobdiff