/*
- libata-scsi.c - helper library for ATA
-
- Copyright 2003-2004 Red Hat, Inc. All rights reserved.
- Copyright 2003-2004 Jeff Garzik
-
- The contents of this file are subject to the Open
- Software License version 1.1 that can be found at
- http://www.opensource.org/licenses/osl-1.1.txt and is included herein
- by reference.
-
- Alternatively, the contents of this file may be used under the terms
- of the GNU General Public License version 2 (the "GPL") as distributed
- in the kernel source COPYING file, in which case the provisions of
- the GPL are applicable instead of the above. If you wish to allow
- the use of your version of this file only under the terms of the
- GPL and not to allow others to use your version of this file under
- the OSL, indicate your decision by deleting the provisions above and
- replace them with the notice and other provisions required by the GPL.
- If you do not delete the provisions above, a recipient may use your
- version of this file under either the OSL or the GPL.
-
+ * libata-scsi.c - helper library for ATA
+ *
+ * Maintained by: Jeff Garzik <jgarzik@pobox.com>
+ * Please ALWAYS copy linux-ide@vger.kernel.org
+ * on emails.
+ *
+ * Copyright 2003-2004 Red Hat, Inc. All rights reserved.
+ * Copyright 2003-2004 Jeff Garzik
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * libata documentation is available via 'make {ps|pdf}docs',
+ * as Documentation/DocBook/libata.*
+ *
+ * Hardware documentation available from
+ * - http://www.t10.org/
+ * - http://www.t13.org/
+ *
*/
#include <linux/kernel.h>
#include <linux/blkdev.h>
#include <linux/spinlock.h>
#include <scsi/scsi.h>
-#include "scsi.h"
#include <scsi/scsi_host.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_request.h>
+#include <scsi/scsi_transport.h>
#include <linux/libata.h>
+#include <linux/hdreg.h>
#include <asm/uaccess.h>
#include "libata.h"
-typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, u8 *scsicmd);
+#define SECTOR_SIZE 512
+
+typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scsicmd);
static struct ata_device *
-ata_scsi_find_dev(struct ata_port *ap, struct scsi_device *scsidev);
+ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev);
+static void ata_scsi_error(struct Scsi_Host *host);
+enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd);
+
+#define RW_RECOVERY_MPAGE 0x1
+#define RW_RECOVERY_MPAGE_LEN 12
+#define CACHE_MPAGE 0x8
+#define CACHE_MPAGE_LEN 20
+#define CONTROL_MPAGE 0xa
+#define CONTROL_MPAGE_LEN 12
+#define ALL_MPAGES 0x3f
+#define ALL_SUB_MPAGES 0xff
+
+
+static const u8 def_rw_recovery_mpage[] = {
+ RW_RECOVERY_MPAGE,
+ RW_RECOVERY_MPAGE_LEN - 2,
+ (1 << 7) | /* AWRE, sat-r06 say it shall be 0 */
+ (1 << 6), /* ARRE (auto read reallocation) */
+ 0, /* read retry count */
+ 0, 0, 0, 0,
+ 0, /* write retry count */
+ 0, 0, 0
+};
+
+static const u8 def_cache_mpage[CACHE_MPAGE_LEN] = {
+ CACHE_MPAGE,
+ CACHE_MPAGE_LEN - 2,
+ 0, /* contains WCE, needs to be 0 for logic */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, /* contains DRA, needs to be 0 for logic */
+ 0, 0, 0, 0, 0, 0, 0
+};
+
+static const u8 def_control_mpage[CONTROL_MPAGE_LEN] = {
+ CONTROL_MPAGE,
+ CONTROL_MPAGE_LEN - 2,
+ 2, /* DSENSE=0, GLTSD=1 */
+ 0, /* [QAM+QERR may be 1, see 05-359r1] */
+ 0, 0, 0, 0, 0xff, 0xff,
+ 0, 30 /* extended self test time, see 05-359r1 */
+};
+
+/*
+ * libata transport template. libata doesn't do real transport stuff.
+ * It just needs the eh_timed_out hook.
+ */
+struct scsi_transport_template ata_scsi_transport_template = {
+ .eh_strategy_handler = ata_scsi_error,
+ .eh_timed_out = ata_scsi_timed_out,
+};
+
+static void ata_scsi_invalid_field(struct scsi_cmnd *cmd,
+ void (*done)(struct scsi_cmnd *))
+{
+ ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ done(cmd);
+}
/**
* ata_std_bios_param - generic bios head/sector/cylinder calculator used by sd.
return 0;
}
-int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg)
+/**
+ * ata_cmd_ioctl - Handler for HDIO_DRIVE_CMD ioctl
+ * @scsidev: Device to which we are issuing command
+ * @arg: User provided data for issuing command
+ *
+ * LOCKING:
+ * Defined by the SCSI layer. We don't really care.
+ *
+ * RETURNS:
+ * Zero on success, negative errno on error.
+ */
+
+int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg)
{
- struct ata_port *ap;
- struct ata_device *dev;
- int val = -EINVAL, rc = -EINVAL;
+ int rc = 0;
+ u8 scsi_cmd[MAX_COMMAND_SIZE];
+ u8 args[4], *argbuf = NULL;
+ int argsize = 0;
+ struct scsi_sense_hdr sshdr;
+ enum dma_data_direction data_dir;
+
+ if (arg == NULL)
+ return -EINVAL;
+
+ if (copy_from_user(args, arg, sizeof(args)))
+ return -EFAULT;
+
+ memset(scsi_cmd, 0, sizeof(scsi_cmd));
+
+ if (args[3]) {
+ argsize = SECTOR_SIZE * args[3];
+ argbuf = kmalloc(argsize, GFP_KERNEL);
+ if (argbuf == NULL) {
+ rc = -ENOMEM;
+ goto error;
+ }
- ap = (struct ata_port *) &scsidev->host->hostdata[0];
- if (!ap)
- goto out;
+ scsi_cmd[1] = (4 << 1); /* PIO Data-in */
+ scsi_cmd[2] = 0x0e; /* no off.line or cc, read from dev,
+ block count in sector count field */
+ data_dir = DMA_FROM_DEVICE;
+ } else {
+ scsi_cmd[1] = (3 << 1); /* Non-data */
+ /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */
+ data_dir = DMA_NONE;
+ }
- dev = ata_scsi_find_dev(ap, scsidev);
- if (!dev) {
- rc = -ENODEV;
- goto out;
+ scsi_cmd[0] = ATA_16;
+
+ scsi_cmd[4] = args[2];
+ if (args[0] == WIN_SMART) { /* hack -- ide driver does this too... */
+ scsi_cmd[6] = args[3];
+ scsi_cmd[8] = args[1];
+ scsi_cmd[10] = 0x4f;
+ scsi_cmd[12] = 0xc2;
+ } else {
+ scsi_cmd[6] = args[1];
}
+ scsi_cmd[14] = args[0];
+
+ /* Good values for timeout and retries? Values below
+ from scsi_ioctl_send_command() for default case... */
+ if (scsi_execute_req(scsidev, scsi_cmd, data_dir, argbuf, argsize,
+ &sshdr, (10*HZ), 5)) {
+ rc = -EIO;
+ goto error;
+ }
+
+ /* Need code to retrieve data from check condition? */
+
+ if ((argbuf)
+ && copy_to_user(arg + sizeof(args), argbuf, argsize))
+ rc = -EFAULT;
+error:
+ if (argbuf)
+ kfree(argbuf);
+
+ return rc;
+}
+
+/**
+ * ata_task_ioctl - Handler for HDIO_DRIVE_TASK ioctl
+ * @scsidev: Device to which we are issuing command
+ * @arg: User provided data for issuing command
+ *
+ * LOCKING:
+ * Defined by the SCSI layer. We don't really care.
+ *
+ * RETURNS:
+ * Zero on success, negative errno on error.
+ */
+int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
+{
+ int rc = 0;
+ u8 scsi_cmd[MAX_COMMAND_SIZE];
+ u8 args[7];
+ struct scsi_sense_hdr sshdr;
+
+ if (arg == NULL)
+ return -EINVAL;
+
+ if (copy_from_user(args, arg, sizeof(args)))
+ return -EFAULT;
+
+ memset(scsi_cmd, 0, sizeof(scsi_cmd));
+ scsi_cmd[0] = ATA_16;
+ scsi_cmd[1] = (3 << 1); /* Non-data */
+ /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */
+ scsi_cmd[4] = args[1];
+ scsi_cmd[6] = args[2];
+ scsi_cmd[8] = args[3];
+ scsi_cmd[10] = args[4];
+ scsi_cmd[12] = args[5];
+ scsi_cmd[14] = args[0];
+
+ /* Good values for timeout and retries? Values below
+ from scsi_ioctl_send_command() for default case... */
+ if (scsi_execute_req(scsidev, scsi_cmd, DMA_NONE, NULL, 0, &sshdr,
+ (10*HZ), 5))
+ rc = -EIO;
+
+ /* Need code to retrieve data from check condition? */
+ return rc;
+}
+
+int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg)
+{
+ int val = -EINVAL, rc = -EINVAL;
switch (cmd) {
case ATA_IOC_GET_IO32:
return -EINVAL;
return 0;
+ case HDIO_DRIVE_CMD:
+ if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
+ return -EACCES;
+ return ata_cmd_ioctl(scsidev, arg);
+
+ case HDIO_DRIVE_TASK:
+ if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
+ return -EACCES;
+ return ata_task_ioctl(scsidev, arg);
+
default:
rc = -ENOTTY;
break;
}
-out:
return rc;
}
qc->scsidone = done;
if (cmd->use_sg) {
- qc->sg = (struct scatterlist *) cmd->request_buffer;
+ qc->__sg = (struct scatterlist *) cmd->request_buffer;
qc->n_elem = cmd->use_sg;
} else {
- qc->sg = &qc->sgent;
+ qc->__sg = &qc->sgent;
qc->n_elem = 1;
}
} else {
return qc;
}
+/**
+ * ata_dump_status - user friendly display of error info
+ * @id: id of the port in question
+ * @tf: ptr to filled out taskfile
+ *
+ * Decode and dump the ATA error/status registers for the user so
+ * that they have some idea what really happened at the non
+ * make-believe layer.
+ *
+ * LOCKING:
+ * inherited from caller
+ */
+void ata_dump_status(unsigned id, struct ata_taskfile *tf)
+{
+ u8 stat = tf->command, err = tf->feature;
+
+ printk(KERN_WARNING "ata%u: status=0x%02x { ", id, stat);
+ if (stat & ATA_BUSY) {
+ printk("Busy }\n"); /* Data is not valid in this case */
+ } else {
+ if (stat & 0x40) printk("DriveReady ");
+ if (stat & 0x20) printk("DeviceFault ");
+ if (stat & 0x10) printk("SeekComplete ");
+ if (stat & 0x08) printk("DataRequest ");
+ if (stat & 0x04) printk("CorrectedError ");
+ if (stat & 0x02) printk("Index ");
+ if (stat & 0x01) printk("Error ");
+ printk("}\n");
+
+ if (err) {
+ printk(KERN_WARNING "ata%u: error=0x%02x { ", id, err);
+ if (err & 0x04) printk("DriveStatusError ");
+ if (err & 0x80) {
+ if (err & 0x04) printk("BadCRC ");
+ else printk("Sector ");
+ }
+ if (err & 0x40) printk("UncorrectableError ");
+ if (err & 0x10) printk("SectorIdNotFound ");
+ if (err & 0x02) printk("TrackZeroNotFound ");
+ if (err & 0x01) printk("AddrMarkNotFound ");
+ printk("}\n");
+ }
+ }
+}
+
+int ata_scsi_device_resume(struct scsi_device *sdev)
+{
+ struct ata_port *ap = (struct ata_port *) &sdev->host->hostdata[0];
+ struct ata_device *dev = &ap->device[sdev->id];
+
+ return ata_device_resume(ap, dev);
+}
+
+int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state)
+{
+ struct ata_port *ap = (struct ata_port *) &sdev->host->hostdata[0];
+ struct ata_device *dev = &ap->device[sdev->id];
+
+ return ata_device_suspend(ap, dev, state);
+}
+
/**
* ata_to_sense_error - convert ATA error to SCSI error
- * @qc: Command that we are erroring out
+ * @id: ATA device number
* @drv_stat: value contained in ATA status register
+ * @drv_err: value contained in ATA error register
+ * @sk: the sense key we'll fill out
+ * @asc: the additional sense code we'll fill out
+ * @ascq: the additional sense code qualifier we'll fill out
*
- * Converts an ATA error into a SCSI error. While we are at it
- * we decode and dump the ATA error for the user so that they
- * have some idea what really happened at the non make-believe
- * layer.
+ * Converts an ATA error into a SCSI error. Fill out pointers to
+ * SK, ASC, and ASCQ bytes for later use in fixed or descriptor
+ * format sense blocks.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
-
-void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat)
+void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc,
+ u8 *ascq)
{
- struct scsi_cmnd *cmd = qc->scsicmd;
- u8 err = 0;
- unsigned char *sb = cmd->sense_buffer;
+ int i;
+
/* Based on the 3ware driver translation table */
- static unsigned char sense_table[][4] = {
+ static const unsigned char sense_table[][4] = {
/* BBD|ECC|ID|MAR */
{0xd1, ABORTED_COMMAND, 0x00, 0x00}, // Device busy Aborted command
/* BBD|ECC|ID */
{0x80, MEDIUM_ERROR, 0x11, 0x04}, // Block marked bad Medium error, unrecovered read error
{0xFF, 0xFF, 0xFF, 0xFF}, // END mark
};
- static unsigned char stat_table[][4] = {
+ static const unsigned char stat_table[][4] = {
/* Must be first because BUSY means no other bits valid */
{0x80, ABORTED_COMMAND, 0x47, 0x00}, // Busy, fake parity for now
{0x20, HARDWARE_ERROR, 0x00, 0x00}, // Device fault
{0x04, RECOVERED_ERROR, 0x11, 0x00}, // Recovered ECC error Medium error, recovered
{0xFF, 0xFF, 0xFF, 0xFF}, // END mark
};
- int i = 0;
-
- cmd->result = SAM_STAT_CHECK_CONDITION;
/*
* Is this an error we can process/parse
*/
+ if (drv_stat & ATA_BUSY) {
+ drv_err = 0; /* Ignore the err bits, they're invalid */
+ }
+
+ if (drv_err) {
+ /* Look for drv_err */
+ for (i = 0; sense_table[i][0] != 0xFF; i++) {
+ /* Look for best matches first */
+ if ((sense_table[i][0] & drv_err) ==
+ sense_table[i][0]) {
+ *sk = sense_table[i][1];
+ *asc = sense_table[i][2];
+ *ascq = sense_table[i][3];
+ goto translate_done;
+ }
+ }
+ /* No immediate match */
+ printk(KERN_WARNING "ata%u: no sense translation for "
+ "error 0x%02x\n", id, drv_err);
+ }
+
+ /* Fall back to interpreting status bits */
+ for (i = 0; stat_table[i][0] != 0xFF; i++) {
+ if (stat_table[i][0] & drv_stat) {
+ *sk = stat_table[i][1];
+ *asc = stat_table[i][2];
+ *ascq = stat_table[i][3];
+ goto translate_done;
+ }
+ }
+ /* No error? Undecoded? */
+ printk(KERN_WARNING "ata%u: no sense translation for status: 0x%02x\n",
+ id, drv_stat);
+
+ /* We need a sensible error return here, which is tricky, and one
+ that won't cause people to do things like return a disk wrongly */
+ *sk = ABORTED_COMMAND;
+ *asc = 0x00;
+ *ascq = 0x00;
+
+ translate_done:
+ return;
+}
+
+/*
+ * ata_gen_ata_desc_sense - Generate check condition sense block.
+ * @qc: Command that completed.
+ *
+ * This function is specific to the ATA descriptor format sense
+ * block specified for the ATA pass through commands. Regardless
+ * of whether the command errored or not, return a sense
+ * block. Copy all controller registers into the sense
+ * block. Clear sense key, ASC & ASCQ if there is no error.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *cmd = qc->scsicmd;
+ struct ata_taskfile *tf = &qc->tf;
+ unsigned char *sb = cmd->sense_buffer;
+ unsigned char *desc = sb + 8;
- if(drv_stat & ATA_ERR)
- /* Read the err bits */
- err = ata_chk_err(qc->ap);
+ memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
- /* Display the ATA level error info */
+ cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
- printk(KERN_WARNING "ata%u: status=0x%02x { ", qc->ap->id, drv_stat);
- if(drv_stat & 0x80)
- {
- printk("Busy ");
- err = 0; /* Data is not valid in this case */
+ /*
+ * Read the controller registers.
+ */
+ WARN_ON(qc->ap->ops->tf_read == NULL);
+ qc->ap->ops->tf_read(qc->ap, tf);
+
+ /*
+ * Use ata_to_sense_error() to map status register bits
+ * onto sense key, asc & ascq.
+ */
+ if (tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
+ ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
+ &sb[1], &sb[2], &sb[3]);
+ sb[1] &= 0x0f;
}
- else {
- if(drv_stat & 0x40) printk("DriveReady ");
- if(drv_stat & 0x20) printk("DeviceFault ");
- if(drv_stat & 0x10) printk("SeekComplete ");
- if(drv_stat & 0x08) printk("DataRequest ");
- if(drv_stat & 0x04) printk("CorrectedError ");
- if(drv_stat & 0x02) printk("Index ");
- if(drv_stat & 0x01) printk("Error ");
+
+ /*
+ * Sense data is current and format is descriptor.
+ */
+ sb[0] = 0x72;
+
+ desc[0] = 0x09;
+
+ /*
+ * Set length of additional sense data.
+ * Since we only populate descriptor 0, the total
+ * length is the same (fixed) length as descriptor 0.
+ */
+ desc[1] = sb[7] = 14;
+
+ /*
+ * Copy registers into sense buffer.
+ */
+ desc[2] = 0x00;
+ desc[3] = tf->feature; /* == error reg */
+ desc[5] = tf->nsect;
+ desc[7] = tf->lbal;
+ desc[9] = tf->lbam;
+ desc[11] = tf->lbah;
+ desc[12] = tf->device;
+ desc[13] = tf->command; /* == status reg */
+
+ /*
+ * Fill in Extend bit, and the high order bytes
+ * if applicable.
+ */
+ if (tf->flags & ATA_TFLAG_LBA48) {
+ desc[2] |= 0x01;
+ desc[4] = tf->hob_nsect;
+ desc[6] = tf->hob_lbal;
+ desc[8] = tf->hob_lbam;
+ desc[10] = tf->hob_lbah;
}
- printk("}\n");
-
- if(err)
- {
- printk(KERN_WARNING "ata%u: error=0x%02x { ", qc->ap->id, err);
- if(err & 0x04) printk("DriveStatusError ");
- if(err & 0x80)
- {
- if(err & 0x04)
- printk("BadCRC ");
- else
- printk("Sector ");
- }
- if(err & 0x40) printk("UncorrectableError ");
- if(err & 0x10) printk("SectorIdNotFound ");
- if(err & 0x02) printk("TrackZeroNotFound ");
- if(err & 0x01) printk("AddrMarkNotFound ");
- printk("}\n");
+}
+
+/**
+ * ata_gen_fixed_sense - generate a SCSI fixed sense block
+ * @qc: Command that we are erroring out
+ *
+ * Leverage ata_to_sense_error() to give us the codes. Fit our
+ * LBA in here if there's room.
+ *
+ * LOCKING:
+ * inherited from caller
+ */
+void ata_gen_fixed_sense(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *cmd = qc->scsicmd;
+ struct ata_taskfile *tf = &qc->tf;
+ unsigned char *sb = cmd->sense_buffer;
+
+ memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
- /* Should we dump sector info here too ?? */
+ cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
+
+ /*
+ * Read the controller registers.
+ */
+ WARN_ON(qc->ap->ops->tf_read == NULL);
+ qc->ap->ops->tf_read(qc->ap, tf);
+
+ /*
+ * Use ata_to_sense_error() to map status register bits
+ * onto sense key, asc & ascq.
+ */
+ if (tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
+ ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
+ &sb[2], &sb[12], &sb[13]);
+ sb[2] &= 0x0f;
}
+ sb[0] = 0x70;
+ sb[7] = 0x0a;
- /* Look for err */
- while(sense_table[i][0] != 0xFF)
- {
- /* Look for best matches first */
- if((sense_table[i][0] & err) == sense_table[i][0])
- {
- sb[0] = 0x70;
- sb[2] = sense_table[i][1];
- sb[7] = 0x0a;
- sb[12] = sense_table[i][2];
- sb[13] = sense_table[i][3];
- return;
- }
- i++;
+ if (tf->flags & ATA_TFLAG_LBA48) {
+ /* TODO: find solution for LBA48 descriptors */
}
- /* No immediate match */
- if(err)
- printk(KERN_DEBUG "ata%u: no sense translation for 0x%02x\n", qc->ap->id, err);
- i = 0;
- /* Fall back to interpreting status bits */
- while(stat_table[i][0] != 0xFF)
- {
- if(stat_table[i][0] & drv_stat)
- {
- sb[0] = 0x70;
- sb[2] = stat_table[i][1];
- sb[7] = 0x0a;
- sb[12] = stat_table[i][2];
- sb[13] = stat_table[i][3];
- return;
- }
- i++;
+ else if (tf->flags & ATA_TFLAG_LBA) {
+ /* A small (28b) LBA will fit in the 32b info field */
+ sb[0] |= 0x80; /* set valid bit */
+ sb[3] = tf->device & 0x0f;
+ sb[4] = tf->lbah;
+ sb[5] = tf->lbam;
+ sb[6] = tf->lbal;
}
- /* No error ?? */
- printk(KERN_ERR "ata%u: called with no error (%02X)!\n", qc->ap->id, drv_stat);
- /* additional-sense-code[-qualifier] */
- sb[0] = 0x70;
- sb[2] = MEDIUM_ERROR;
- sb[7] = 0x0A;
- if (cmd->sc_data_direction == DMA_FROM_DEVICE) {
- sb[12] = 0x11; /* "unrecovered read error" */
- sb[13] = 0x04;
- } else {
- sb[12] = 0x0C; /* "write error - */
- sb[13] = 0x02; /* auto-reallocation failed" */
+ else {
+ /* TODO: C/H/S */
+ }
+}
+
+static void ata_scsi_sdev_config(struct scsi_device *sdev)
+{
+ sdev->use_10_for_rw = 1;
+ sdev->use_10_for_ms = 1;
+}
+
+static void ata_scsi_dev_config(struct scsi_device *sdev,
+ struct ata_device *dev)
+{
+ unsigned int max_sectors;
+
+ /* TODO: 2048 is an arbitrary number, not the
+ * hardware maximum. This should be increased to
+ * 65534 when Jens Axboe's patch for dynamically
+ * determining max_sectors is merged.
+ */
+ max_sectors = ATA_MAX_SECTORS;
+ if (dev->flags & ATA_DFLAG_LBA48)
+ max_sectors = 2048;
+ if (dev->max_sectors)
+ max_sectors = dev->max_sectors;
+
+ blk_queue_max_sectors(sdev->request_queue, max_sectors);
+
+ /*
+ * SATA DMA transfers must be multiples of 4 byte, so
+ * we need to pad ATAPI transfers using an extra sg.
+ * Decrement max hw segments accordingly.
+ */
+ if (dev->class == ATA_DEV_ATAPI) {
+ request_queue_t *q = sdev->request_queue;
+ blk_queue_max_hw_segments(q, q->max_hw_segments - 1);
}
}
int ata_scsi_slave_config(struct scsi_device *sdev)
{
- sdev->use_10_for_rw = 1;
- sdev->use_10_for_ms = 1;
+ ata_scsi_sdev_config(sdev);
blk_queue_max_phys_segments(sdev->request_queue, LIBATA_MAX_PRD);
ap = (struct ata_port *) &sdev->host->hostdata[0];
dev = &ap->device[sdev->id];
- /* TODO: 1024 is an arbitrary number, not the
- * hardware maximum. This should be increased to
- * 65534 when Jens Axboe's patch for dynamically
- * determining max_sectors is merged.
- */
- if ((dev->flags & ATA_DFLAG_LBA48) &&
- ((dev->flags & ATA_DFLAG_LOCK_SECTORS) == 0)) {
- /*
- * do not overwrite sdev->host->max_sectors, since
- * other drives on this host may not support LBA48
- */
- blk_queue_max_sectors(sdev->request_queue, 2048);
- }
+ ata_scsi_dev_config(sdev, dev);
}
return 0; /* scsi layer doesn't check return value, sigh */
}
+/**
+ * ata_scsi_timed_out - SCSI layer time out callback
+ * @cmd: timed out SCSI command
+ *
+ * Handles SCSI layer timeout. We race with normal completion of
+ * the qc for @cmd. If the qc is already gone, we lose and let
+ * the scsi command finish (EH_HANDLED). Otherwise, the qc has
+ * timed out and EH should be invoked. Prevent ata_qc_complete()
+ * from finishing it by setting EH_SCHEDULED and return
+ * EH_NOT_HANDLED.
+ *
+ * LOCKING:
+ * Called from timer context
+ *
+ * RETURNS:
+ * EH_HANDLED or EH_NOT_HANDLED
+ */
+enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd)
+{
+ struct Scsi_Host *host = cmd->device->host;
+ struct ata_port *ap = (struct ata_port *) &host->hostdata[0];
+ unsigned long flags;
+ struct ata_queued_cmd *qc;
+ enum scsi_eh_timer_return ret = EH_HANDLED;
+
+ DPRINTK("ENTER\n");
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ if (qc) {
+ WARN_ON(qc->scsicmd != cmd);
+ qc->flags |= ATA_QCFLAG_EH_SCHEDULED;
+ qc->err_mask |= AC_ERR_TIMEOUT;
+ ret = EH_NOT_HANDLED;
+ }
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ DPRINTK("EXIT, ret=%d\n", ret);
+ return ret;
+}
+
/**
* ata_scsi_error - SCSI layer error handler callback
* @host: SCSI host on which error occurred
*
* LOCKING:
* Inherited from SCSI layer (none, can sleep)
- *
- * RETURNS:
- * Zero.
*/
-int ata_scsi_error(struct Scsi_Host *host)
+static void ata_scsi_error(struct Scsi_Host *host)
{
struct ata_port *ap;
+ unsigned long flags;
DPRINTK("ENTER\n");
ap = (struct ata_port *) &host->hostdata[0];
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ WARN_ON(ap->flags & ATA_FLAG_IN_EH);
+ ap->flags |= ATA_FLAG_IN_EH;
+ WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ ata_port_flush_task(ap);
+
ap->ops->eng_timeout(ap);
- /* TODO: this is per-command; when queueing is supported
- * this code will either change or move to a more
- * appropriate place
- */
- host->host_failed--;
+ WARN_ON(host->host_failed || !list_empty(&host->eh_cmd_q));
+
+ scsi_eh_flush_done_q(&ap->eh_done_q);
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ ap->flags &= ~ATA_FLAG_IN_EH;
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
DPRINTK("EXIT\n");
+}
+
+static void ata_eh_scsidone(struct scsi_cmnd *scmd)
+{
+ /* nada */
+}
+
+static void __ata_eh_qc_complete(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct scsi_cmnd *scmd = qc->scsicmd;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ qc->scsidone = ata_eh_scsidone;
+ __ata_qc_complete(qc);
+ WARN_ON(ata_tag_valid(qc->tag));
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ scsi_eh_finish_cmd(scmd, &ap->eh_done_q);
+}
+
+/**
+ * ata_eh_qc_complete - Complete an active ATA command from EH
+ * @qc: Command to complete
+ *
+ * Indicate to the mid and upper layers that an ATA command has
+ * completed. To be used from EH.
+ */
+void ata_eh_qc_complete(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *scmd = qc->scsicmd;
+ scmd->retries = scmd->allowed;
+ __ata_eh_qc_complete(qc);
+}
+
+/**
+ * ata_eh_qc_retry - Tell midlayer to retry an ATA command after EH
+ * @qc: Command to retry
+ *
+ * Indicate to the mid and upper layers that an ATA command
+ * should be retried. To be used from EH.
+ *
+ * SCSI midlayer limits the number of retries to scmd->allowed.
+ * This function might need to adjust scmd->retries for commands
+ * which get retried due to unrelated NCQ failures.
+ */
+void ata_eh_qc_retry(struct ata_queued_cmd *qc)
+{
+ __ata_eh_qc_complete(qc);
+}
+
+/**
+ * ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command
+ * @qc: Storage for translated ATA taskfile
+ * @scsicmd: SCSI command to translate
+ *
+ * Sets up an ATA taskfile to issue STANDBY (to stop) or READ VERIFY
+ * (to start). Perhaps these commands should be preceded by
+ * CHECK POWER MODE to see what power mode the device is already in.
+ * [See SAT revision 5 at www.t10.org]
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ *
+ * RETURNS:
+ * Zero on success, non-zero on error.
+ */
+
+static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc,
+ const u8 *scsicmd)
+{
+ struct ata_taskfile *tf = &qc->tf;
+
+ tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
+ tf->protocol = ATA_PROT_NODATA;
+ if (scsicmd[1] & 0x1) {
+ ; /* ignore IMMED bit, violates sat-r05 */
+ }
+ if (scsicmd[4] & 0x2)
+ goto invalid_fld; /* LOEJ bit set not supported */
+ if (((scsicmd[4] >> 4) & 0xf) != 0)
+ goto invalid_fld; /* power conditions not supported */
+ if (scsicmd[4] & 0x1) {
+ tf->nsect = 1; /* 1 sector, lba=0 */
+
+ if (qc->dev->flags & ATA_DFLAG_LBA) {
+ qc->tf.flags |= ATA_TFLAG_LBA;
+
+ tf->lbah = 0x0;
+ tf->lbam = 0x0;
+ tf->lbal = 0x0;
+ tf->device |= ATA_LBA;
+ } else {
+ /* CHS */
+ tf->lbal = 0x1; /* sect */
+ tf->lbam = 0x0; /* cyl low */
+ tf->lbah = 0x0; /* cyl high */
+ }
+
+ tf->command = ATA_CMD_VERIFY; /* READ VERIFY */
+ } else {
+ tf->nsect = 0; /* time period value (0 implies now) */
+ tf->command = ATA_CMD_STANDBY;
+ /* Consider: ATA STANDBY IMMEDIATE command */
+ }
+ /*
+ * Standby and Idle condition timers could be implemented but that
+ * would require libata to implement the Power condition mode page
+ * and allow the user to change it. Changing mode pages requires
+ * MODE SELECT to be implemented.
+ */
+
return 0;
+
+invalid_fld:
+ ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ return 1;
}
+
/**
* ata_scsi_flush_xlat - Translate SCSI SYNCHRONIZE CACHE command
* @qc: Storage for translated ATA taskfile
* Zero on success, non-zero on error.
*/
-static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, u8 *scsicmd)
+static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
{
struct ata_taskfile *tf = &qc->tf;
tf->flags |= ATA_TFLAG_DEVICE;
tf->protocol = ATA_PROT_NODATA;
- if ((tf->flags & ATA_TFLAG_LBA48) &&
+ if ((qc->dev->flags & ATA_DFLAG_LBA48) &&
(ata_id_has_flush_ext(qc->dev->id)))
tf->command = ATA_CMD_FLUSH_EXT;
else
return 0;
}
+/**
+ * scsi_6_lba_len - Get LBA and transfer length
+ * @scsicmd: SCSI command to translate
+ *
+ * Calculate LBA and transfer length for 6-byte commands.
+ *
+ * RETURNS:
+ * @plba: the LBA
+ * @plen: the transfer length
+ */
+
+static void scsi_6_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen)
+{
+ u64 lba = 0;
+ u32 len = 0;
+
+ VPRINTK("six-byte command\n");
+
+ lba |= ((u64)scsicmd[2]) << 8;
+ lba |= ((u64)scsicmd[3]);
+
+ len |= ((u32)scsicmd[4]);
+
+ *plba = lba;
+ *plen = len;
+}
+
+/**
+ * scsi_10_lba_len - Get LBA and transfer length
+ * @scsicmd: SCSI command to translate
+ *
+ * Calculate LBA and transfer length for 10-byte commands.
+ *
+ * RETURNS:
+ * @plba: the LBA
+ * @plen: the transfer length
+ */
+
+static void scsi_10_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen)
+{
+ u64 lba = 0;
+ u32 len = 0;
+
+ VPRINTK("ten-byte command\n");
+
+ lba |= ((u64)scsicmd[2]) << 24;
+ lba |= ((u64)scsicmd[3]) << 16;
+ lba |= ((u64)scsicmd[4]) << 8;
+ lba |= ((u64)scsicmd[5]);
+
+ len |= ((u32)scsicmd[7]) << 8;
+ len |= ((u32)scsicmd[8]);
+
+ *plba = lba;
+ *plen = len;
+}
+
+/**
+ * scsi_16_lba_len - Get LBA and transfer length
+ * @scsicmd: SCSI command to translate
+ *
+ * Calculate LBA and transfer length for 16-byte commands.
+ *
+ * RETURNS:
+ * @plba: the LBA
+ * @plen: the transfer length
+ */
+
+static void scsi_16_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen)
+{
+ u64 lba = 0;
+ u32 len = 0;
+
+ VPRINTK("sixteen-byte command\n");
+
+ lba |= ((u64)scsicmd[2]) << 56;
+ lba |= ((u64)scsicmd[3]) << 48;
+ lba |= ((u64)scsicmd[4]) << 40;
+ lba |= ((u64)scsicmd[5]) << 32;
+ lba |= ((u64)scsicmd[6]) << 24;
+ lba |= ((u64)scsicmd[7]) << 16;
+ lba |= ((u64)scsicmd[8]) << 8;
+ lba |= ((u64)scsicmd[9]);
+
+ len |= ((u32)scsicmd[10]) << 24;
+ len |= ((u32)scsicmd[11]) << 16;
+ len |= ((u32)scsicmd[12]) << 8;
+ len |= ((u32)scsicmd[13]);
+
+ *plba = lba;
+ *plen = len;
+}
+
/**
* ata_scsi_verify_xlat - Translate SCSI VERIFY command into an ATA one
* @qc: Storage for translated ATA taskfile
* Zero on success, non-zero on error.
*/
-static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd)
+static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
{
struct ata_taskfile *tf = &qc->tf;
- unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48;
+ struct ata_device *dev = qc->dev;
u64 dev_sectors = qc->dev->n_sectors;
- u64 sect = 0;
- u32 n_sect = 0;
+ u64 block;
+ u32 n_block;
tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
tf->protocol = ATA_PROT_NODATA;
- tf->device |= ATA_LBA;
-
- if (scsicmd[0] == VERIFY) {
- sect |= ((u64)scsicmd[2]) << 24;
- sect |= ((u64)scsicmd[3]) << 16;
- sect |= ((u64)scsicmd[4]) << 8;
- sect |= ((u64)scsicmd[5]);
-
- n_sect |= ((u32)scsicmd[7]) << 8;
- n_sect |= ((u32)scsicmd[8]);
- }
-
- else if (scsicmd[0] == VERIFY_16) {
- sect |= ((u64)scsicmd[2]) << 56;
- sect |= ((u64)scsicmd[3]) << 48;
- sect |= ((u64)scsicmd[4]) << 40;
- sect |= ((u64)scsicmd[5]) << 32;
- sect |= ((u64)scsicmd[6]) << 24;
- sect |= ((u64)scsicmd[7]) << 16;
- sect |= ((u64)scsicmd[8]) << 8;
- sect |= ((u64)scsicmd[9]);
-
- n_sect |= ((u32)scsicmd[10]) << 24;
- n_sect |= ((u32)scsicmd[11]) << 16;
- n_sect |= ((u32)scsicmd[12]) << 8;
- n_sect |= ((u32)scsicmd[13]);
- }
+ if (scsicmd[0] == VERIFY)
+ scsi_10_lba_len(scsicmd, &block, &n_block);
+ else if (scsicmd[0] == VERIFY_16)
+ scsi_16_lba_len(scsicmd, &block, &n_block);
else
- return 1;
-
- if (!n_sect)
- return 1;
- if (sect >= dev_sectors)
- return 1;
- if ((sect + n_sect) > dev_sectors)
- return 1;
- if (lba48) {
- if (n_sect > (64 * 1024))
- return 1;
+ goto invalid_fld;
+
+ if (!n_block)
+ goto nothing_to_do;
+ if (block >= dev_sectors)
+ goto out_of_range;
+ if ((block + n_block) > dev_sectors)
+ goto out_of_range;
+
+ if (dev->flags & ATA_DFLAG_LBA) {
+ tf->flags |= ATA_TFLAG_LBA;
+
+ if (lba_28_ok(block, n_block)) {
+ /* use LBA28 */
+ tf->command = ATA_CMD_VERIFY;
+ tf->device |= (block >> 24) & 0xf;
+ } else if (lba_48_ok(block, n_block)) {
+ if (!(dev->flags & ATA_DFLAG_LBA48))
+ goto out_of_range;
+
+ /* use LBA48 */
+ tf->flags |= ATA_TFLAG_LBA48;
+ tf->command = ATA_CMD_VERIFY_EXT;
+
+ tf->hob_nsect = (n_block >> 8) & 0xff;
+
+ tf->hob_lbah = (block >> 40) & 0xff;
+ tf->hob_lbam = (block >> 32) & 0xff;
+ tf->hob_lbal = (block >> 24) & 0xff;
+ } else
+ /* request too large even for LBA48 */
+ goto out_of_range;
+
+ tf->nsect = n_block & 0xff;
+
+ tf->lbah = (block >> 16) & 0xff;
+ tf->lbam = (block >> 8) & 0xff;
+ tf->lbal = block & 0xff;
+
+ tf->device |= ATA_LBA;
} else {
- if (n_sect > 256)
- return 1;
- }
+ /* CHS */
+ u32 sect, head, cyl, track;
- if (lba48) {
- tf->command = ATA_CMD_VERIFY_EXT;
+ if (!lba_28_ok(block, n_block))
+ goto out_of_range;
- tf->hob_nsect = (n_sect >> 8) & 0xff;
+ /* Convert LBA to CHS */
+ track = (u32)block / dev->sectors;
+ cyl = track / dev->heads;
+ head = track % dev->heads;
+ sect = (u32)block % dev->sectors + 1;
- tf->hob_lbah = (sect >> 40) & 0xff;
- tf->hob_lbam = (sect >> 32) & 0xff;
- tf->hob_lbal = (sect >> 24) & 0xff;
- } else {
- tf->command = ATA_CMD_VERIFY;
+ DPRINTK("block %u track %u cyl %u head %u sect %u\n",
+ (u32)block, track, cyl, head, sect);
+
+ /* Check whether the converted CHS can fit.
+ Cylinder: 0-65535
+ Head: 0-15
+ Sector: 1-255*/
+ if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect))
+ goto out_of_range;
- tf->device |= (sect >> 24) & 0xf;
+ tf->command = ATA_CMD_VERIFY;
+ tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */
+ tf->lbal = sect;
+ tf->lbam = cyl;
+ tf->lbah = cyl >> 8;
+ tf->device |= head;
}
- tf->nsect = n_sect & 0xff;
+ return 0;
- tf->lbah = (sect >> 16) & 0xff;
- tf->lbam = (sect >> 8) & 0xff;
- tf->lbal = sect & 0xff;
+invalid_fld:
+ ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ return 1;
- return 0;
+out_of_range:
+ ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0);
+ /* "Logical Block Address out of range" */
+ return 1;
+
+nothing_to_do:
+ qc->scsicmd->result = SAM_STAT_GOOD;
+ return 1;
}
/**
* Zero on success, non-zero on error.
*/
-static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd)
+static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
{
struct ata_taskfile *tf = &qc->tf;
- unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48;
+ struct ata_device *dev = qc->dev;
+ u64 block;
+ u32 n_block;
tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
- tf->protocol = qc->dev->xfer_protocol;
- tf->device |= ATA_LBA;
- if (scsicmd[0] == READ_10 || scsicmd[0] == READ_6 ||
- scsicmd[0] == READ_16) {
- tf->command = qc->dev->read_cmd;
- } else {
- tf->command = qc->dev->write_cmd;
+ if (scsicmd[0] == WRITE_10 || scsicmd[0] == WRITE_6 ||
+ scsicmd[0] == WRITE_16)
tf->flags |= ATA_TFLAG_WRITE;
+
+ /* Calculate the SCSI LBA, transfer length and FUA. */
+ switch (scsicmd[0]) {
+ case READ_10:
+ case WRITE_10:
+ scsi_10_lba_len(scsicmd, &block, &n_block);
+ if (unlikely(scsicmd[1] & (1 << 3)))
+ tf->flags |= ATA_TFLAG_FUA;
+ break;
+ case READ_6:
+ case WRITE_6:
+ scsi_6_lba_len(scsicmd, &block, &n_block);
+
+ /* for 6-byte r/w commands, transfer length 0
+ * means 256 blocks of data, not 0 block.
+ */
+ if (!n_block)
+ n_block = 256;
+ break;
+ case READ_16:
+ case WRITE_16:
+ scsi_16_lba_len(scsicmd, &block, &n_block);
+ if (unlikely(scsicmd[1] & (1 << 3)))
+ tf->flags |= ATA_TFLAG_FUA;
+ break;
+ default:
+ DPRINTK("no-byte command\n");
+ goto invalid_fld;
}
- if (scsicmd[0] == READ_10 || scsicmd[0] == WRITE_10) {
- if (lba48) {
- tf->hob_nsect = scsicmd[7];
- tf->hob_lbal = scsicmd[2];
-
- qc->nsect = ((unsigned int)scsicmd[7] << 8) |
- scsicmd[8];
- } else {
- /* if we don't support LBA48 addressing, the request
- * -may- be too large. */
- if ((scsicmd[2] & 0xf0) || scsicmd[7])
- return 1;
-
- /* stores LBA27:24 in lower 4 bits of device reg */
- tf->device |= scsicmd[2];
+ /* Check and compose ATA command */
+ if (!n_block)
+ /* For 10-byte and 16-byte SCSI R/W commands, transfer
+ * length 0 means transfer 0 block of data.
+ * However, for ATA R/W commands, sector count 0 means
+ * 256 or 65536 sectors, not 0 sectors as in SCSI.
+ *
+ * WARNING: one or two older ATA drives treat 0 as 0...
+ */
+ goto nothing_to_do;
- qc->nsect = scsicmd[8];
- }
+ if (dev->flags & ATA_DFLAG_LBA) {
+ tf->flags |= ATA_TFLAG_LBA;
- tf->nsect = scsicmd[8];
- tf->lbal = scsicmd[5];
- tf->lbam = scsicmd[4];
- tf->lbah = scsicmd[3];
+ if (lba_28_ok(block, n_block)) {
+ /* use LBA28 */
+ tf->device |= (block >> 24) & 0xf;
+ } else if (lba_48_ok(block, n_block)) {
+ if (!(dev->flags & ATA_DFLAG_LBA48))
+ goto out_of_range;
- VPRINTK("ten-byte command\n");
- return 0;
- }
+ /* use LBA48 */
+ tf->flags |= ATA_TFLAG_LBA48;
- if (scsicmd[0] == READ_6 || scsicmd[0] == WRITE_6) {
- qc->nsect = tf->nsect = scsicmd[4];
- tf->lbal = scsicmd[3];
- tf->lbam = scsicmd[2];
- tf->lbah = scsicmd[1] & 0x1f; /* mask out reserved bits */
+ tf->hob_nsect = (n_block >> 8) & 0xff;
- VPRINTK("six-byte command\n");
- return 0;
- }
+ tf->hob_lbah = (block >> 40) & 0xff;
+ tf->hob_lbam = (block >> 32) & 0xff;
+ tf->hob_lbal = (block >> 24) & 0xff;
+ } else
+ /* request too large even for LBA48 */
+ goto out_of_range;
- if (scsicmd[0] == READ_16 || scsicmd[0] == WRITE_16) {
- /* rule out impossible LBAs and sector counts */
- if (scsicmd[2] || scsicmd[3] || scsicmd[10] || scsicmd[11])
- return 1;
+ if (unlikely(ata_rwcmd_protocol(qc) < 0))
+ goto invalid_fld;
- if (lba48) {
- tf->hob_nsect = scsicmd[12];
- tf->hob_lbal = scsicmd[6];
- tf->hob_lbam = scsicmd[5];
- tf->hob_lbah = scsicmd[4];
+ qc->nsect = n_block;
+ tf->nsect = n_block & 0xff;
- qc->nsect = ((unsigned int)scsicmd[12] << 8) |
- scsicmd[13];
- } else {
- /* once again, filter out impossible non-zero values */
- if (scsicmd[4] || scsicmd[5] || scsicmd[12] ||
- (scsicmd[6] & 0xf0))
- return 1;
+ tf->lbah = (block >> 16) & 0xff;
+ tf->lbam = (block >> 8) & 0xff;
+ tf->lbal = block & 0xff;
- /* stores LBA27:24 in lower 4 bits of device reg */
- tf->device |= scsicmd[6];
+ tf->device |= ATA_LBA;
+ } else {
+ /* CHS */
+ u32 sect, head, cyl, track;
+
+ /* The request -may- be too large for CHS addressing. */
+ if (!lba_28_ok(block, n_block))
+ goto out_of_range;
+
+ if (unlikely(ata_rwcmd_protocol(qc) < 0))
+ goto invalid_fld;
+
+ /* Convert LBA to CHS */
+ track = (u32)block / dev->sectors;
+ cyl = track / dev->heads;
+ head = track % dev->heads;
+ sect = (u32)block % dev->sectors + 1;
+
+ DPRINTK("block %u track %u cyl %u head %u sect %u\n",
+ (u32)block, track, cyl, head, sect);
+
+ /* Check whether the converted CHS can fit.
+ Cylinder: 0-65535
+ Head: 0-15
+ Sector: 1-255*/
+ if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect))
+ goto out_of_range;
+
+ qc->nsect = n_block;
+ tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */
+ tf->lbal = sect;
+ tf->lbam = cyl;
+ tf->lbah = cyl >> 8;
+ tf->device |= head;
+ }
- qc->nsect = scsicmd[13];
- }
+ return 0;
- tf->nsect = scsicmd[13];
- tf->lbal = scsicmd[9];
- tf->lbam = scsicmd[8];
- tf->lbah = scsicmd[7];
+invalid_fld:
+ ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ return 1;
- VPRINTK("sixteen-byte command\n");
- return 0;
- }
+out_of_range:
+ ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0);
+ /* "Logical Block Address out of range" */
+ return 1;
- DPRINTK("no-byte command\n");
+nothing_to_do:
+ qc->scsicmd->result = SAM_STAT_GOOD;
return 1;
}
-static int ata_scsi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
+static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
{
struct scsi_cmnd *cmd = qc->scsicmd;
+ u8 *cdb = cmd->cmnd;
+ int need_sense = (qc->err_mask != 0);
+
+ /* For ATA pass thru (SAT) commands, generate a sense block if
+ * user mandated it or if there's an error. Note that if we
+ * generate because the user forced us to, a check condition
+ * is generated and the ATA register values are returned
+ * whether the command completed successfully or not. If there
+ * was no error, SK, ASC and ASCQ will all be zero.
+ */
+ if (((cdb[0] == ATA_16) || (cdb[0] == ATA_12)) &&
+ ((cdb[2] & 0x20) || need_sense)) {
+ ata_gen_ata_desc_sense(qc);
+ } else {
+ if (!need_sense) {
+ cmd->result = SAM_STAT_GOOD;
+ } else {
+ /* TODO: decide which descriptor format to use
+ * for 48b LBA devices and call that here
+ * instead of the fixed desc, which is only
+ * good for smaller LBA (and maybe CHS?)
+ * devices.
+ */
+ ata_gen_fixed_sense(qc);
+ }
+ }
- if (unlikely(drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ)))
- ata_to_sense_error(qc, drv_stat);
- else
- cmd->result = SAM_STAT_GOOD;
+ if (need_sense) {
+ /* The ata_gen_..._sense routines fill in tf */
+ ata_dump_status(qc->ap->id, &qc->tf);
+ }
qc->scsidone(cmd);
- return 0;
+ ata_qc_free(qc);
}
/**
* This function sets up an ata_queued_cmd structure for the
* SCSI command, and sends that ata_queued_cmd to the hardware.
*
+ * The xlat_func argument (actor) returns 0 if ready to execute
+ * ATA command, else 1 to finish translation. If 1 is returned
+ * then cmd->result (and possibly cmd->sense_buffer) are assumed
+ * to be set reflecting an error condition or clean (early)
+ * termination.
+ *
* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
qc = ata_scsi_qc_new(ap, dev, cmd, done);
if (!qc)
- return;
+ goto err_mem;
/* data is present; dma-map it */
if (cmd->sc_data_direction == DMA_FROM_DEVICE ||
if (unlikely(cmd->request_bufflen < 1)) {
printk(KERN_WARNING "ata%u(%u): WARNING: zero len r/w req\n",
ap->id, dev->devno);
- goto err_out;
+ goto err_did;
}
if (cmd->use_sg)
qc->complete_fn = ata_scsi_qc_complete;
if (xlat_func(qc, scsicmd))
- goto err_out;
+ goto early_finish;
/* select device, send command to hardware */
- if (ata_qc_issue(qc))
- goto err_out;
+ ata_qc_issue(qc);
VPRINTK("EXIT\n");
return;
-err_out:
+early_finish:
+ ata_qc_free(qc);
+ done(cmd);
+ DPRINTK("EXIT - early finish (good or error)\n");
+ return;
+
+err_did:
ata_qc_free(qc);
- ata_bad_cdb(cmd, done);
- DPRINTK("EXIT - badcmd\n");
+err_mem:
+ cmd->result = (DID_ERROR << 16);
+ done(cmd);
+ DPRINTK("EXIT - internal\n");
+ return;
}
/**
* Mapping the response buffer, calling the command's handler,
* and handling the handler's return value. This return value
* indicates whether the handler wishes the SCSI command to be
- * completed successfully, or not.
+ * completed successfully (0), or not (in which case cmd->result
+ * and sense buffer are assumed to be set).
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
rc = actor(args, rbuf, buflen);
ata_scsi_rbuf_put(cmd, rbuf);
- if (rc)
- ata_bad_cdb(cmd, args->done);
- else {
+ if (rc == 0)
cmd->result = SAM_STAT_GOOD;
- args->done(cmd);
- }
+ args->done(cmd);
}
/**
* @buflen: Response buffer length.
*
* Returns standard device identification data associated
- * with non-EVPD INQUIRY command output.
+ * with non-VPD INQUIRY command output.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
if (buflen > 35) {
memcpy(&rbuf[8], "ATA ", 8);
- ata_dev_id_string(args->id, &rbuf[16], ATA_ID_PROD_OFS, 16);
- ata_dev_id_string(args->id, &rbuf[32], ATA_ID_FW_REV_OFS, 4);
+ ata_id_string(args->id, &rbuf[16], ATA_ID_PROD_OFS, 16);
+ ata_id_string(args->id, &rbuf[32], ATA_ID_FW_REV_OFS, 4);
if (rbuf[32] == 0 || rbuf[32] == ' ')
memcpy(&rbuf[32], "n/a ", 4);
}
}
/**
- * ata_scsiop_inq_00 - Simulate INQUIRY EVPD page 0, list of pages
+ * ata_scsiop_inq_00 - Simulate INQUIRY VPD page 0, list of pages
* @args: device IDENTIFY data / SCSI command of interest.
* @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
* @buflen: Response buffer length.
*
- * Returns list of inquiry EVPD pages available.
+ * Returns list of inquiry VPD pages available.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
0x80, /* page 0x80, unit serial no page */
0x83 /* page 0x83, device ident page */
};
- rbuf[3] = sizeof(pages); /* number of supported EVPD pages */
+ rbuf[3] = sizeof(pages); /* number of supported VPD pages */
if (buflen > 6)
memcpy(rbuf + 4, pages, sizeof(pages));
}
/**
- * ata_scsiop_inq_80 - Simulate INQUIRY EVPD page 80, device serial number
+ * ata_scsiop_inq_80 - Simulate INQUIRY VPD page 80, device serial number
* @args: device IDENTIFY data / SCSI command of interest.
* @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
* @buflen: Response buffer length.
memcpy(rbuf, hdr, sizeof(hdr));
if (buflen > (ATA_SERNO_LEN + 4 - 1))
- ata_dev_id_string(args->id, (unsigned char *) &rbuf[4],
- ATA_ID_SERNO_OFS, ATA_SERNO_LEN);
+ ata_id_string(args->id, (unsigned char *) &rbuf[4],
+ ATA_ID_SERNO_OFS, ATA_SERNO_LEN);
return 0;
}
-static const char *inq_83_str = "Linux ATA-SCSI simulator";
-
/**
- * ata_scsiop_inq_83 - Simulate INQUIRY EVPD page 83, device identity
+ * ata_scsiop_inq_83 - Simulate INQUIRY VPD page 83, device identity
* @args: device IDENTIFY data / SCSI command of interest.
* @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
* @buflen: Response buffer length.
*
- * Returns device identification. Currently hardcoded to
- * return "Linux ATA-SCSI simulator".
+ * Yields two logical unit device identification designators:
+ * - vendor specific ASCII containing the ATA serial number
+ * - SAT defined "t10 vendor id based" containing ASCII vendor
+ * name ("ATA "), model and serial numbers.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf,
unsigned int buflen)
{
- rbuf[1] = 0x83; /* this page code */
- rbuf[3] = 4 + strlen(inq_83_str); /* page len */
+ int num;
+ const int sat_model_serial_desc_len = 68;
+ const int ata_model_byte_len = 40;
- /* our one and only identification descriptor (vendor-specific) */
- if (buflen > (strlen(inq_83_str) + 4 + 4 - 1)) {
- rbuf[4 + 0] = 2; /* code set: ASCII */
- rbuf[4 + 3] = strlen(inq_83_str);
- memcpy(rbuf + 4 + 4, inq_83_str, strlen(inq_83_str));
+ rbuf[1] = 0x83; /* this page code */
+ num = 4;
+
+ if (buflen > (ATA_SERNO_LEN + num + 3)) {
+ /* piv=0, assoc=lu, code_set=ACSII, designator=vendor */
+ rbuf[num + 0] = 2;
+ rbuf[num + 3] = ATA_SERNO_LEN;
+ num += 4;
+ ata_id_string(args->id, (unsigned char *) rbuf + num,
+ ATA_ID_SERNO_OFS, ATA_SERNO_LEN);
+ num += ATA_SERNO_LEN;
}
-
+ if (buflen > (sat_model_serial_desc_len + num + 3)) {
+ /* SAT defined lu model and serial numbers descriptor */
+ /* piv=0, assoc=lu, code_set=ACSII, designator=t10 vendor id */
+ rbuf[num + 0] = 2;
+ rbuf[num + 1] = 1;
+ rbuf[num + 3] = sat_model_serial_desc_len;
+ num += 4;
+ memcpy(rbuf + num, "ATA ", 8);
+ num += 8;
+ ata_id_string(args->id, (unsigned char *) rbuf + num,
+ ATA_ID_PROD_OFS, ata_model_byte_len);
+ num += ata_model_byte_len;
+ ata_id_string(args->id, (unsigned char *) rbuf + num,
+ ATA_ID_SERNO_OFS, ATA_SERNO_LEN);
+ num += ATA_SERNO_LEN;
+ }
+ rbuf[3] = num - 4; /* page len (assume less than 256 bytes) */
return 0;
}
static unsigned int ata_msense_caching(u16 *id, u8 **ptr_io,
const u8 *last)
{
- u8 page[] = {
- 0x8, /* page code */
- 0x12, /* page length */
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 10 zeroes */
- 0, 0, 0, 0, 0, 0, 0, 0 /* 8 zeroes */
- };
+ u8 page[CACHE_MPAGE_LEN];
+ memcpy(page, def_cache_mpage, sizeof(page));
if (ata_id_wcache_enabled(id))
page[2] |= (1 << 2); /* write cache enable */
if (!ata_id_rahead_enabled(id))
static unsigned int ata_msense_ctl_mode(u8 **ptr_io, const u8 *last)
{
- const u8 page[] = {0xa, 0xa, 6, 0, 0, 0, 0, 0, 0xff, 0xff, 0, 30};
-
- /* byte 2: set the descriptor format sense data bit (bit 2)
- * since we need to support returning this format for SAT
- * commands and any SCSI commands against a 48b LBA device.
- */
-
- ata_msense_push(ptr_io, last, page, sizeof(page));
- return sizeof(page);
+ ata_msense_push(ptr_io, last, def_control_mpage,
+ sizeof(def_control_mpage));
+ return sizeof(def_control_mpage);
}
/**
static unsigned int ata_msense_rw_recovery(u8 **ptr_io, const u8 *last)
{
- const u8 page[] = {
- 0x1, /* page code */
- 0xa, /* page length */
- (1 << 7) | (1 << 6), /* note auto r/w reallocation */
- 0, 0, 0, 0, 0, 0, 0, 0, 0 /* 9 zeroes */
- };
- ata_msense_push(ptr_io, last, page, sizeof(page));
- return sizeof(page);
+ ata_msense_push(ptr_io, last, def_rw_recovery_mpage,
+ sizeof(def_rw_recovery_mpage));
+ return sizeof(def_rw_recovery_mpage);
+}
+
+/*
+ * We can turn this into a real blacklist if it's needed, for now just
+ * blacklist any Maxtor BANC1G10 revision firmware
+ */
+static int ata_dev_supports_fua(u16 *id)
+{
+ unsigned char model[41], fw[9];
+
+ if (!libata_fua)
+ return 0;
+ if (!ata_id_has_fua(id))
+ return 0;
+
+ ata_id_c_string(id, model, ATA_ID_PROD_OFS, sizeof(model));
+ ata_id_c_string(id, fw, ATA_ID_FW_REV_OFS, sizeof(fw));
+
+ if (strcmp(model, "Maxtor"))
+ return 1;
+ if (strcmp(fw, "BANC1G10"))
+ return 1;
+
+ return 0; /* blacklisted */
}
/**
* @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
* @buflen: Response buffer length.
*
- * Simulate MODE SENSE commands.
+ * Simulate MODE SENSE commands. Assume this is invoked for direct
+ * access devices (e.g. disks) only. There should be no block
+ * descriptor for other device types.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf,
unsigned int buflen)
{
+ struct ata_device *dev = args->dev;
u8 *scsicmd = args->cmd->cmnd, *p, *last;
- unsigned int page_control, six_byte, output_len;
+ const u8 sat_blk_desc[] = {
+ 0, 0, 0, 0, /* number of blocks: sat unspecified */
+ 0,
+ 0, 0x2, 0x0 /* block length: 512 bytes */
+ };
+ u8 pg, spg;
+ unsigned int ebd, page_control, six_byte, output_len, alloc_len, minlen;
+ u8 dpofua;
VPRINTK("ENTER\n");
six_byte = (scsicmd[0] == MODE_SENSE);
-
- /* we only support saved and current values (which we treat
- * in the same manner)
+ ebd = !(scsicmd[1] & 0x8); /* dbd bit inverted == edb */
+ /*
+ * LLBA bit in msense(10) ignored (compliant)
*/
+
page_control = scsicmd[2] >> 6;
- if ((page_control != 0) && (page_control != 3))
- return 1;
+ switch (page_control) {
+ case 0: /* current */
+ break; /* supported */
+ case 3: /* saved */
+ goto saving_not_supp;
+ case 1: /* changeable */
+ case 2: /* defaults */
+ default:
+ goto invalid_fld;
+ }
- if (six_byte)
- output_len = 4;
- else
- output_len = 8;
+ if (six_byte) {
+ output_len = 4 + (ebd ? 8 : 0);
+ alloc_len = scsicmd[4];
+ } else {
+ output_len = 8 + (ebd ? 8 : 0);
+ alloc_len = (scsicmd[7] << 8) + scsicmd[8];
+ }
+ minlen = (alloc_len < buflen) ? alloc_len : buflen;
p = rbuf + output_len;
- last = rbuf + buflen - 1;
+ last = rbuf + minlen - 1;
+
+ pg = scsicmd[2] & 0x3f;
+ spg = scsicmd[3];
+ /*
+ * No mode subpages supported (yet) but asking for _all_
+ * subpages may be valid
+ */
+ if (spg && (spg != ALL_SUB_MPAGES))
+ goto invalid_fld;
- switch(scsicmd[2] & 0x3f) {
- case 0x01: /* r/w error recovery */
+ switch(pg) {
+ case RW_RECOVERY_MPAGE:
output_len += ata_msense_rw_recovery(&p, last);
break;
- case 0x08: /* caching */
+ case CACHE_MPAGE:
output_len += ata_msense_caching(args->id, &p, last);
break;
- case 0x0a: { /* control mode */
+ case CONTROL_MPAGE: {
output_len += ata_msense_ctl_mode(&p, last);
break;
}
- case 0x3f: /* all pages */
+ case ALL_MPAGES:
output_len += ata_msense_rw_recovery(&p, last);
output_len += ata_msense_caching(args->id, &p, last);
output_len += ata_msense_ctl_mode(&p, last);
break;
default: /* invalid page code */
- return 1;
+ goto invalid_fld;
}
+ if (minlen < 1)
+ return 0;
+
+ dpofua = 0;
+ if (ata_dev_supports_fua(args->id) && dev->flags & ATA_DFLAG_LBA48 &&
+ (!(dev->flags & ATA_DFLAG_PIO) || dev->multi_count))
+ dpofua = 1 << 4;
+
if (six_byte) {
output_len--;
rbuf[0] = output_len;
+ if (minlen > 2)
+ rbuf[2] |= dpofua;
+ if (ebd) {
+ if (minlen > 3)
+ rbuf[3] = sizeof(sat_blk_desc);
+ if (minlen > 11)
+ memcpy(rbuf + 4, sat_blk_desc,
+ sizeof(sat_blk_desc));
+ }
} else {
output_len -= 2;
rbuf[0] = output_len >> 8;
- rbuf[1] = output_len;
+ if (minlen > 1)
+ rbuf[1] = output_len;
+ if (minlen > 3)
+ rbuf[3] |= dpofua;
+ if (ebd) {
+ if (minlen > 7)
+ rbuf[7] = sizeof(sat_blk_desc);
+ if (minlen > 15)
+ memcpy(rbuf + 8, sat_blk_desc,
+ sizeof(sat_blk_desc));
+ }
}
-
return 0;
+
+invalid_fld:
+ ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ return 1;
+
+saving_not_supp:
+ ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x39, 0x0);
+ /* "Saving parameters not supported" */
+ return 1;
}
/**
VPRINTK("ENTER\n");
- if (ata_id_has_lba48(args->id))
- n_sectors = ata_id_u64(args->id, 100);
- else
- n_sectors = ata_id_u32(args->id, 60);
+ if (ata_id_has_lba(args->id)) {
+ if (ata_id_has_lba48(args->id))
+ n_sectors = ata_id_u64(args->id, 100);
+ else
+ n_sectors = ata_id_u32(args->id, 60);
+ } else {
+ /* CHS default translation */
+ n_sectors = args->id[1] * args->id[3] * args->id[6];
+
+ if (ata_id_current_chs_valid(args->id))
+ /* CHS current translation */
+ n_sectors = ata_id_u32(args->id, 57);
+ }
+
n_sectors--; /* ATA TotalUserSectors - 1 */
- tmp = n_sectors; /* note: truncates, if lba48 */
if (args->cmd->cmnd[0] == READ_CAPACITY) {
+ if( n_sectors >= 0xffffffffULL )
+ tmp = 0xffffffff ; /* Return max count on overflow */
+ else
+ tmp = n_sectors ;
+
/* sector count, 32-bit */
rbuf[0] = tmp >> (8 * 3);
rbuf[1] = tmp >> (8 * 2);
} else {
/* sector count, 64-bit */
- rbuf[2] = n_sectors >> (8 * 7);
- rbuf[3] = n_sectors >> (8 * 6);
- rbuf[4] = n_sectors >> (8 * 5);
- rbuf[5] = n_sectors >> (8 * 4);
+ tmp = n_sectors >> (8 * 4);
+ rbuf[2] = tmp >> (8 * 3);
+ rbuf[3] = tmp >> (8 * 2);
+ rbuf[4] = tmp >> (8 * 1);
+ rbuf[5] = tmp;
+ tmp = n_sectors;
rbuf[6] = tmp >> (8 * 3);
rbuf[7] = tmp >> (8 * 2);
rbuf[8] = tmp >> (8 * 1);
return 0;
}
+/**
+ * ata_scsi_set_sense - Set SCSI sense data and status
+ * @cmd: SCSI request to be handled
+ * @sk: SCSI-defined sense key
+ * @asc: SCSI-defined additional sense code
+ * @ascq: SCSI-defined additional sense code qualifier
+ *
+ * Helper function that builds a valid fixed format, current
+ * response code and the given sense key (sk), additional sense
+ * code (asc) and additional sense code qualifier (ascq) with
+ * a SCSI command status of %SAM_STAT_CHECK_CONDITION and
+ * DRIVER_SENSE set in the upper bits of scsi_cmnd::result .
+ *
+ * LOCKING:
+ * Not required
+ */
+
+void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq)
+{
+ cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
+
+ cmd->sense_buffer[0] = 0x70; /* fixed format, current */
+ cmd->sense_buffer[2] = sk;
+ cmd->sense_buffer[7] = 18 - 8; /* additional sense length */
+ cmd->sense_buffer[12] = asc;
+ cmd->sense_buffer[13] = ascq;
+}
+
/**
* ata_scsi_badcmd - End a SCSI request with an error
* @cmd: SCSI request to be handled
void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq)
{
DPRINTK("ENTER\n");
- cmd->result = SAM_STAT_CHECK_CONDITION;
+ ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, asc, ascq);
+
+ done(cmd);
+}
+
+static void atapi_sense_complete(struct ata_queued_cmd *qc)
+{
+ if (qc->err_mask && ((qc->err_mask & AC_ERR_DEV) == 0))
+ /* FIXME: not quite right; we don't want the
+ * translation of taskfile registers into
+ * a sense descriptors, since that's only
+ * correct for ATA, not ATAPI
+ */
+ ata_gen_ata_desc_sense(qc);
+
+ qc->scsidone(qc->scsicmd);
+ ata_qc_free(qc);
+}
+
+/* is it pointless to prefer PIO for "safety reasons"? */
+static inline int ata_pio_use_silly(struct ata_port *ap)
+{
+ return (ap->flags & ATA_FLAG_PIO_DMA);
+}
+static void atapi_request_sense(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct scsi_cmnd *cmd = qc->scsicmd;
+
+ DPRINTK("ATAPI request sense\n");
+
+ /* FIXME: is this needed? */
+ memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer));
+
+ ap->ops->tf_read(ap, &qc->tf);
+
+ /* fill these in, for the case where they are -not- overwritten */
cmd->sense_buffer[0] = 0x70;
- cmd->sense_buffer[2] = ILLEGAL_REQUEST;
- cmd->sense_buffer[7] = 14 - 8; /* addnl. sense len. FIXME: correct? */
- cmd->sense_buffer[12] = asc;
- cmd->sense_buffer[13] = ascq;
+ cmd->sense_buffer[2] = qc->tf.feature >> 4;
- done(cmd);
+ ata_qc_reinit(qc);
+
+ ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer));
+ qc->dma_dir = DMA_FROM_DEVICE;
+
+ memset(&qc->cdb, 0, qc->dev->cdb_len);
+ qc->cdb[0] = REQUEST_SENSE;
+ qc->cdb[4] = SCSI_SENSE_BUFFERSIZE;
+
+ qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ qc->tf.command = ATA_CMD_PACKET;
+
+ if (ata_pio_use_silly(ap)) {
+ qc->tf.protocol = ATA_PROT_ATAPI_DMA;
+ qc->tf.feature |= ATAPI_PKT_DMA;
+ } else {
+ qc->tf.protocol = ATA_PROT_ATAPI;
+ qc->tf.lbam = (8 * 1024) & 0xff;
+ qc->tf.lbah = (8 * 1024) >> 8;
+ }
+ qc->nbytes = SCSI_SENSE_BUFFERSIZE;
+
+ qc->complete_fn = atapi_sense_complete;
+
+ ata_qc_issue(qc);
+
+ DPRINTK("EXIT\n");
}
-static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
+static void atapi_qc_complete(struct ata_queued_cmd *qc)
{
struct scsi_cmnd *cmd = qc->scsicmd;
+ unsigned int err_mask = qc->err_mask;
- if (unlikely(drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ))) {
- DPRINTK("request check condition\n");
+ VPRINTK("ENTER, err_mask 0x%X\n", err_mask);
+ if (unlikely(err_mask & AC_ERR_DEV)) {
cmd->result = SAM_STAT_CHECK_CONDITION;
+ atapi_request_sense(qc);
+ return;
+ }
- qc->scsidone(cmd);
+ else if (unlikely(err_mask))
+ /* FIXME: not quite right; we don't want the
+ * translation of taskfile registers into
+ * a sense descriptors, since that's only
+ * correct for ATA, not ATAPI
+ */
+ ata_gen_ata_desc_sense(qc);
- return 1;
- } else {
+ else {
u8 *scsicmd = cmd->cmnd;
- if (scsicmd[0] == INQUIRY) {
+ if ((scsicmd[0] == INQUIRY) && ((scsicmd[1] & 0x03) == 0)) {
u8 *buf = NULL;
unsigned int buflen;
buflen = ata_scsi_rbuf_get(cmd, &buf);
- buf[2] = 0x5;
- buf[3] = (buf[3] & 0xf0) | 2;
+
+ /* ATAPI devices typically report zero for their SCSI version,
+ * and sometimes deviate from the spec WRT response data
+ * format. If SCSI version is reported as zero like normal,
+ * then we make the following fixups: 1) Fake MMC-5 version,
+ * to indicate to the Linux scsi midlayer this is a modern
+ * device. 2) Ensure response data format / ATAPI information
+ * are always correct.
+ */
+ if (buf[2] == 0) {
+ buf[2] = 0x5;
+ buf[3] = 0x32;
+ }
+
ata_scsi_rbuf_put(cmd, buf);
}
+
cmd->result = SAM_STAT_GOOD;
}
qc->scsidone(cmd);
-
- return 0;
+ ata_qc_free(qc);
}
/**
* atapi_xlat - Initialize PACKET taskfile
* Zero on success, non-zero on failure.
*/
-static unsigned int atapi_xlat(struct ata_queued_cmd *qc, u8 *scsicmd)
+static unsigned int atapi_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
{
struct scsi_cmnd *cmd = qc->scsicmd;
struct ata_device *dev = qc->dev;
if (ata_check_atapi_dma(qc))
using_pio = 1;
- memcpy(&qc->cdb, scsicmd, qc->ap->cdb_len);
+ memcpy(&qc->cdb, scsicmd, dev->cdb_len);
qc->complete_fn = atapi_qc_complete;
*/
static struct ata_device *
-ata_scsi_find_dev(struct ata_port *ap, struct scsi_device *scsidev)
+ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev)
{
struct ata_device *dev;
if (unlikely(!ata_dev_present(dev)))
return NULL;
-#ifndef ATA_ENABLE_ATAPI
- if (unlikely(dev->class == ATA_DEV_ATAPI))
- return NULL;
-#endif
+ if (!atapi_enabled || (ap->flags & ATA_FLAG_NO_ATAPI)) {
+ if (unlikely(dev->class == ATA_DEV_ATAPI)) {
+ printk(KERN_WARNING "ata%u(%u): WARNING: ATAPI is %s, device ignored.\n",
+ ap->id, dev->devno, atapi_enabled ? "not supported with this driver" : "disabled");
+ return NULL;
+ }
+ }
return dev;
}
+/*
+ * ata_scsi_map_proto - Map pass-thru protocol value to taskfile value.
+ * @byte1: Byte 1 from pass-thru CDB.
+ *
+ * RETURNS:
+ * ATA_PROT_UNKNOWN if mapping failed/unimplemented, protocol otherwise.
+ */
+static u8
+ata_scsi_map_proto(u8 byte1)
+{
+ switch((byte1 & 0x1e) >> 1) {
+ case 3: /* Non-data */
+ return ATA_PROT_NODATA;
+
+ case 6: /* DMA */
+ return ATA_PROT_DMA;
+
+ case 4: /* PIO Data-in */
+ case 5: /* PIO Data-out */
+ return ATA_PROT_PIO;
+
+ case 10: /* Device Reset */
+ case 0: /* Hard Reset */
+ case 1: /* SRST */
+ case 2: /* Bus Idle */
+ case 7: /* Packet */
+ case 8: /* DMA Queued */
+ case 9: /* Device Diagnostic */
+ case 11: /* UDMA Data-in */
+ case 12: /* UDMA Data-Out */
+ case 13: /* FPDMA */
+ default: /* Reserved */
+ break;
+ }
+
+ return ATA_PROT_UNKNOWN;
+}
+
+/**
+ * ata_scsi_pass_thru - convert ATA pass-thru CDB to taskfile
+ * @qc: command structure to be initialized
+ * @scsicmd: SCSI command to convert
+ *
+ * Handles either 12 or 16-byte versions of the CDB.
+ *
+ * RETURNS:
+ * Zero on success, non-zero on failure.
+ */
+static unsigned int
+ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd)
+{
+ struct ata_taskfile *tf = &(qc->tf);
+ struct scsi_cmnd *cmd = qc->scsicmd;
+
+ if ((tf->protocol = ata_scsi_map_proto(scsicmd[1])) == ATA_PROT_UNKNOWN)
+ goto invalid_fld;
+
+ if (scsicmd[1] & 0xe0)
+ /* PIO multi not supported yet */
+ goto invalid_fld;
+
+ /*
+ * 12 and 16 byte CDBs use different offsets to
+ * provide the various register values.
+ */
+ if (scsicmd[0] == ATA_16) {
+ /*
+ * 16-byte CDB - may contain extended commands.
+ *
+ * If that is the case, copy the upper byte register values.
+ */
+ if (scsicmd[1] & 0x01) {
+ tf->hob_feature = scsicmd[3];
+ tf->hob_nsect = scsicmd[5];
+ tf->hob_lbal = scsicmd[7];
+ tf->hob_lbam = scsicmd[9];
+ tf->hob_lbah = scsicmd[11];
+ tf->flags |= ATA_TFLAG_LBA48;
+ } else
+ tf->flags &= ~ATA_TFLAG_LBA48;
+
+ /*
+ * Always copy low byte, device and command registers.
+ */
+ tf->feature = scsicmd[4];
+ tf->nsect = scsicmd[6];
+ tf->lbal = scsicmd[8];
+ tf->lbam = scsicmd[10];
+ tf->lbah = scsicmd[12];
+ tf->device = scsicmd[13];
+ tf->command = scsicmd[14];
+ } else {
+ /*
+ * 12-byte CDB - incapable of extended commands.
+ */
+ tf->flags &= ~ATA_TFLAG_LBA48;
+
+ tf->feature = scsicmd[3];
+ tf->nsect = scsicmd[4];
+ tf->lbal = scsicmd[5];
+ tf->lbam = scsicmd[6];
+ tf->lbah = scsicmd[7];
+ tf->device = scsicmd[8];
+ tf->command = scsicmd[9];
+ }
+ /*
+ * If slave is possible, enforce correct master/slave bit
+ */
+ if (qc->ap->flags & ATA_FLAG_SLAVE_POSS)
+ tf->device = qc->dev->devno ?
+ tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1;
+
+ /*
+ * Filter SET_FEATURES - XFER MODE command -- otherwise,
+ * SET_FEATURES - XFER MODE must be preceded/succeeded
+ * by an update to hardware-specific registers for each
+ * controller (i.e. the reason for ->set_piomode(),
+ * ->set_dmamode(), and ->post_set_mode() hooks).
+ */
+ if ((tf->command == ATA_CMD_SET_FEATURES)
+ && (tf->feature == SETFEATURES_XFER))
+ goto invalid_fld;
+
+ /*
+ * Set flags so that all registers will be written,
+ * and pass on write indication (used for PIO/DMA
+ * setup.)
+ */
+ tf->flags |= (ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE);
+
+ if (cmd->sc_data_direction == DMA_TO_DEVICE)
+ tf->flags |= ATA_TFLAG_WRITE;
+
+ /*
+ * Set transfer length.
+ *
+ * TODO: find out if we need to do more here to
+ * cover scatter/gather case.
+ */
+ qc->nsect = cmd->bufflen / ATA_SECT_SIZE;
+
+ return 0;
+
+ invalid_fld:
+ ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x00);
+ /* "Invalid field in cdb" */
+ return 1;
+}
+
/**
* ata_get_xlat_func - check if SCSI to ATA translation is possible
* @dev: ATA device
case VERIFY:
case VERIFY_16:
return ata_scsi_verify_xlat;
+
+ case ATA_12:
+ case ATA_16:
+ return ata_scsi_pass_thru;
+
+ case START_STOP:
+ return ata_scsi_start_stop_xlat;
}
return NULL;
#endif
}
+static inline void __ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *),
+ struct ata_port *ap, struct ata_device *dev)
+{
+ if (dev->class == ATA_DEV_ATA) {
+ ata_xlat_func_t xlat_func = ata_get_xlat_func(dev,
+ cmd->cmnd[0]);
+
+ if (xlat_func)
+ ata_scsi_translate(ap, dev, cmd, done, xlat_func);
+ else
+ ata_scsi_simulate(ap, dev, cmd, done);
+ } else
+ ata_scsi_translate(ap, dev, cmd, done, atapi_xlat);
+}
+
/**
* ata_scsi_queuecmd - Issue SCSI cdb to libata-managed device
* @cmd: SCSI command to be sent
struct ata_port *ap;
struct ata_device *dev;
struct scsi_device *scsidev = cmd->device;
+ struct Scsi_Host *shost = scsidev->host;
- ap = (struct ata_port *) &scsidev->host->hostdata[0];
+ ap = (struct ata_port *) &shost->hostdata[0];
+
+ spin_unlock(shost->host_lock);
+ spin_lock(&ap->host_set->lock);
ata_scsi_dump_cdb(ap, cmd);
dev = ata_scsi_find_dev(ap, scsidev);
- if (unlikely(!dev)) {
+ if (likely(dev))
+ __ata_scsi_queuecmd(cmd, done, ap, dev);
+ else {
cmd->result = (DID_BAD_TARGET << 16);
done(cmd);
- goto out_unlock;
}
- if (dev->class == ATA_DEV_ATA) {
- ata_xlat_func_t xlat_func = ata_get_xlat_func(dev,
- cmd->cmnd[0]);
-
- if (xlat_func)
- ata_scsi_translate(ap, dev, cmd, done, xlat_func);
- else
- ata_scsi_simulate(dev->id, cmd, done);
- } else
- ata_scsi_translate(ap, dev, cmd, done, atapi_xlat);
-
-out_unlock:
+ spin_unlock(&ap->host_set->lock);
+ spin_lock(shost->host_lock);
return 0;
}
/**
* ata_scsi_simulate - simulate SCSI command on ATA device
- * @id: current IDENTIFY data for target device.
+ * @ap: port the device is connected to
+ * @dev: the target device
* @cmd: SCSI command being sent to device.
* @done: SCSI command completion function.
*
* spin_lock_irqsave(host_set lock)
*/
-void ata_scsi_simulate(u16 *id,
+void ata_scsi_simulate(struct ata_port *ap, struct ata_device *dev,
struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *))
{
struct ata_scsi_args args;
- u8 *scsicmd = cmd->cmnd;
+ const u8 *scsicmd = cmd->cmnd;
- args.id = id;
+ args.ap = ap;
+ args.dev = dev;
+ args.id = dev->id;
args.cmd = cmd;
args.done = done;
case INQUIRY:
if (scsicmd[1] & 2) /* is CmdDt set? */
- ata_bad_cdb(cmd, done);
+ ata_scsi_invalid_field(cmd, done);
else if ((scsicmd[1] & 1) == 0) /* is EVPD clear? */
ata_scsi_rbuf_fill(&args, ata_scsiop_inq_std);
else if (scsicmd[2] == 0x00)
else if (scsicmd[2] == 0x83)
ata_scsi_rbuf_fill(&args, ata_scsiop_inq_83);
else
- ata_bad_cdb(cmd, done);
+ ata_scsi_invalid_field(cmd, done);
break;
case MODE_SENSE:
case MODE_SELECT: /* unconditionally return */
case MODE_SELECT_10: /* bad-field-in-cdb */
- ata_bad_cdb(cmd, done);
+ ata_scsi_invalid_field(cmd, done);
break;
case READ_CAPACITY:
if ((scsicmd[1] & 0x1f) == SAI_READ_CAPACITY_16)
ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap);
else
- ata_bad_cdb(cmd, done);
+ ata_scsi_invalid_field(cmd, done);
break;
case REPORT_LUNS:
ata_scsi_rbuf_fill(&args, ata_scsiop_report_luns);
break;
- /* mandantory commands we haven't implemented yet */
+ /* mandatory commands we haven't implemented yet */
case REQUEST_SENSE:
/* all other commands */
default:
- ata_bad_scsiop(cmd, done);
+ ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x20, 0x0);
+ /* "Invalid command operation code" */
+ done(cmd);
break;
}
}
+void ata_scsi_scan_host(struct ata_port *ap)
+{
+ struct ata_device *dev;
+ unsigned int i;
+
+ if (ap->flags & ATA_FLAG_PORT_DISABLED)
+ return;
+
+ for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ dev = &ap->device[i];
+
+ if (ata_dev_present(dev))
+ scsi_scan_target(&ap->host->shost_gendev, 0, i, 0, 0);
+ }
+}
+
git://git.onelab.eu / linux-2.6.git / blobdiff