module_param(free_ports, bool, 0);
MODULE_PARM_DESC(free_ports, "Release IO ports after configuration? (default: 0 (=no))");
-/* /usr/src/linux/drivers/scsi/hosts.h */
static struct scsi_host_template nsp_driver_template = {
.proc_name = "nsp_cs",
.proc_info = nsp_proc_info,
* Clenaup parameters and call done() functions.
* You must be set SCpnt->result before call this function.
*/
-static void nsp_scsi_done(Scsi_Cmnd *SCpnt)
+static void nsp_scsi_done(struct scsi_cmnd *SCpnt)
{
nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
SCpnt->scsi_done(SCpnt);
}
-static int nsp_queuecommand(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
+static int nsp_queuecommand(struct scsi_cmnd *SCpnt,
+ void (*done)(struct scsi_cmnd *))
{
#ifdef NSP_DEBUG
/*unsigned int host_id = SCpnt->device->host->this_id;*/
/*
* Start selection phase
*/
-static int nsphw_start_selection(Scsi_Cmnd *SCpnt)
+static int nsphw_start_selection(struct scsi_cmnd *SCpnt)
{
unsigned int host_id = SCpnt->device->host->this_id;
unsigned int base = SCpnt->device->host->io_port;
/*
* setup synchronous data transfer mode
*/
-static int nsp_analyze_sdtr(Scsi_Cmnd *SCpnt)
+static int nsp_analyze_sdtr(struct scsi_cmnd *SCpnt)
{
unsigned char target = scmd_id(SCpnt);
// unsigned char lun = SCpnt->device->lun;
/*
* start ninja hardware timer
*/
-static void nsp_start_timer(Scsi_Cmnd *SCpnt, int time)
+static void nsp_start_timer(struct scsi_cmnd *SCpnt, int time)
{
unsigned int base = SCpnt->device->host->io_port;
nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
/*
* wait for bus phase change
*/
-static int nsp_negate_signal(Scsi_Cmnd *SCpnt, unsigned char mask, char *str)
+static int nsp_negate_signal(struct scsi_cmnd *SCpnt, unsigned char mask,
+ char *str)
{
unsigned int base = SCpnt->device->host->io_port;
unsigned char reg;
/*
* expect Ninja Irq
*/
-static int nsp_expect_signal(Scsi_Cmnd *SCpnt,
- unsigned char current_phase,
- unsigned char mask)
+static int nsp_expect_signal(struct scsi_cmnd *SCpnt,
+ unsigned char current_phase,
+ unsigned char mask)
{
unsigned int base = SCpnt->device->host->io_port;
int time_out;
/*
* transfer SCSI message
*/
-static int nsp_xfer(Scsi_Cmnd *SCpnt, int phase)
+static int nsp_xfer(struct scsi_cmnd *SCpnt, int phase)
{
unsigned int base = SCpnt->device->host->io_port;
nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
/*
* get extra SCSI data from fifo
*/
-static int nsp_dataphase_bypass(Scsi_Cmnd *SCpnt)
+static int nsp_dataphase_bypass(struct scsi_cmnd *SCpnt)
{
nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
unsigned int count;
/*
* accept reselection
*/
-static int nsp_reselected(Scsi_Cmnd *SCpnt)
+static int nsp_reselected(struct scsi_cmnd *SCpnt)
{
unsigned int base = SCpnt->device->host->io_port;
unsigned int host_id = SCpnt->device->host->this_id;
/*
* count how many data transferd
*/
-static int nsp_fifo_count(Scsi_Cmnd *SCpnt)
+static int nsp_fifo_count(struct scsi_cmnd *SCpnt)
{
unsigned int base = SCpnt->device->host->io_port;
unsigned int count;
/*
* read data in DATA IN phase
*/
-static void nsp_pio_read(Scsi_Cmnd *SCpnt)
+static void nsp_pio_read(struct scsi_cmnd *SCpnt)
{
unsigned int base = SCpnt->device->host->io_port;
unsigned long mmio_base = SCpnt->device->host->base;
/*
* write data in DATA OUT phase
*/
-static void nsp_pio_write(Scsi_Cmnd *SCpnt)
+static void nsp_pio_write(struct scsi_cmnd *SCpnt)
{
unsigned int base = SCpnt->device->host->io_port;
unsigned long mmio_base = SCpnt->device->host->base;
/*
* setup synchronous/asynchronous data transfer mode
*/
-static int nsp_nexus(Scsi_Cmnd *SCpnt)
+static int nsp_nexus(struct scsi_cmnd *SCpnt)
{
unsigned int base = SCpnt->device->host->io_port;
unsigned char target = scmd_id(SCpnt);
/*
* interrupt handler
*/
-static irqreturn_t nspintr(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t nspintr(int irq, void *dev_id)
{
unsigned int base;
unsigned char irq_status, irq_phase, phase;
- Scsi_Cmnd *tmpSC;
+ struct scsi_cmnd *tmpSC;
unsigned char target, lun;
unsigned int *sync_neg;
int i, tmp;
/*---------------------------------------------------------------*/
/*
-static int nsp_eh_abort(Scsi_Cmnd *SCpnt)
+static int nsp_eh_abort(struct scsi_cmnd *SCpnt)
{
nsp_dbg(NSP_DEBUG_BUSRESET, "SCpnt=0x%p", SCpnt);
return SUCCESS;
}
-static int nsp_eh_bus_reset(Scsi_Cmnd *SCpnt)
+static int nsp_eh_bus_reset(struct scsi_cmnd *SCpnt)
{
nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
return nsp_bus_reset(data);
}
-static int nsp_eh_host_reset(Scsi_Cmnd *SCpnt)
+static int nsp_eh_host_reset(struct scsi_cmnd *SCpnt)
{
nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
configure the card at this point -- we wait until we receive a
card insertion event.
======================================================================*/
-static int nsp_cs_attach(struct pcmcia_device *p_dev)
+static int nsp_cs_probe(struct pcmcia_device *link)
{
scsi_info_t *info;
- dev_link_t *link;
nsp_hw_data *data = &nsp_data_base;
+ int ret;
nsp_dbg(NSP_DEBUG_INIT, "in");
info = kmalloc(sizeof(*info), GFP_KERNEL);
if (info == NULL) { return -ENOMEM; }
memset(info, 0, sizeof(*info));
- link = &info->link;
+ info->p_dev = link;
link->priv = info;
data->ScsiInfo = info;
/* Interrupt handler */
link->irq.Handler = &nspintr;
link->irq.Instance = info;
- link->irq.Attributes |= (SA_SHIRQ | SA_SAMPLE_RANDOM);
+ link->irq.Attributes |= IRQF_SHARED;
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
- link->conf.Present = PRESENT_OPTION;
- link->handle = p_dev;
- p_dev->instance = link;
-
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- nsp_cs_config(link);
+ ret = nsp_cs_config(link);
nsp_dbg(NSP_DEBUG_INIT, "link=0x%p", link);
- return 0;
+ return ret;
} /* nsp_cs_attach */
structures are freed. Otherwise, the structures will be freed
when the device is released.
======================================================================*/
-static void nsp_cs_detach(struct pcmcia_device *p_dev)
+static void nsp_cs_detach(struct pcmcia_device *link)
{
- dev_link_t *link = dev_to_instance(p_dev);
-
nsp_dbg(NSP_DEBUG_INIT, "in, link=0x%p", link);
- if (link->state & DEV_CONFIG) {
- ((scsi_info_t *)link->priv)->stop = 1;
- nsp_cs_release(link);
- }
+ ((scsi_info_t *)link->priv)->stop = 1;
+ nsp_cs_release(link);
kfree(link->priv);
link->priv = NULL;
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
/*====================================================================*/
-static void nsp_cs_config(dev_link_t *link)
+static int nsp_cs_config(struct pcmcia_device *link)
{
- client_handle_t handle = link->handle;
+ int ret;
scsi_info_t *info = link->priv;
tuple_t tuple;
cisparse_t parse;
nsp_dbg(NSP_DEBUG_INIT, "in");
- tuple.DesiredTuple = CISTPL_CONFIG;
tuple.Attributes = 0;
tuple.TupleData = tuple_data;
tuple.TupleDataMax = sizeof(tuple_data);
tuple.TupleOffset = 0;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
- CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
- CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
- link->conf.ConfigBase = parse.config.base;
- link->conf.Present = parse.config.rmask[0];
-
- /* Configure card */
- link->state |= DEV_CONFIG;
/* Look up the current Vcc */
- CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &conf));
- link->conf.Vcc = conf.Vcc;
+ CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &conf));
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+ CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
while (1) {
cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
- if (pcmcia_get_tuple_data(handle, &tuple) != 0 ||
- pcmcia_parse_tuple(handle, &tuple, &parse) != 0)
+ if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
+ pcmcia_parse_tuple(link, &tuple, &parse) != 0)
goto next_entry;
if (cfg->flags & CISTPL_CFTABLE_DEFAULT) { dflt = *cfg; }
}
if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) {
- link->conf.Vpp1 = link->conf.Vpp2 =
+ link->conf.Vpp =
cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
} else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) {
- link->conf.Vpp1 = link->conf.Vpp2 =
+ link->conf.Vpp =
dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
}
link->io.NumPorts2 = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(link->handle, &link->io) != 0)
+ if (pcmcia_request_io(link, &link->io) != 0)
goto next_entry;
}
req.Size = 0x1000;
}
req.AccessSpeed = 0;
- if (pcmcia_request_window(&link->handle, &req, &link->win) != 0)
+ if (pcmcia_request_window(&link, &req, &link->win) != 0)
goto next_entry;
map.Page = 0; map.CardOffset = mem->win[0].card_addr;
if (pcmcia_map_mem_page(link->win, &map) != 0)
next_entry:
nsp_dbg(NSP_DEBUG_INIT, "next");
-
- if (link->io.NumPorts1) {
- pcmcia_release_io(link->handle, &link->io);
- }
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(handle, &tuple));
+ pcmcia_disable_device(link);
+ CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
}
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq));
+ CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
}
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(handle, &link->conf));
+ CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
if (free_ports) {
if (link->io.BasePort1) {
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,74))
- scsi_add_host (host, NULL);
+ ret = scsi_add_host (host, NULL);
+ if (ret)
+ goto cs_failed;
+
scsi_scan_host(host);
snprintf(info->node.dev_name, sizeof(info->node.dev_name), "scsi%d", host->host_no);
- link->dev = &info->node;
+ link->dev_node = &info->node;
info->host = host;
#else
nsp_dbg(NSP_DEBUG_INIT, "GET_SCSI_INFO");
- tail = &link->dev;
+ tail = &link->dev_node;
info->ndev = 0;
nsp_dbg(NSP_DEBUG_INIT, "host=0x%p", host);
#endif
/* Finally, report what we've done */
- printk(KERN_INFO "nsp_cs: index 0x%02x: Vcc %d.%d",
- link->conf.ConfigIndex,
- link->conf.Vcc/10, link->conf.Vcc%10);
- if (link->conf.Vpp1) {
- printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10);
+ printk(KERN_INFO "nsp_cs: index 0x%02x: ",
+ link->conf.ConfigIndex);
+ if (link->conf.Vpp) {
+ printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
}
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
printk(", irq %d", link->irq.AssignedIRQ);
req.Base+req.Size-1);
printk("\n");
- link->state &= ~DEV_CONFIG_PENDING;
- return;
+ return 0;
cs_failed:
nsp_dbg(NSP_DEBUG_INIT, "config fail");
- cs_error(link->handle, last_fn, last_ret);
+ cs_error(link, last_fn, last_ret);
nsp_cs_release(link);
- return;
+ return -ENODEV;
} /* nsp_cs_config */
#undef CS_CHECK
device, and release the PCMCIA configuration. If the device is
still open, this will be postponed until it is closed.
======================================================================*/
-static void nsp_cs_release(dev_link_t *link)
+static void nsp_cs_release(struct pcmcia_device *link)
{
scsi_info_t *info = link->priv;
nsp_hw_data *data = NULL;
#else
scsi_unregister_host(&nsp_driver_template);
#endif
- link->dev = NULL;
+ link->dev_node = NULL;
if (link->win) {
if (data != NULL) {
iounmap((void *)(data->MmioAddress));
}
- pcmcia_release_window(link->win);
- }
- pcmcia_release_configuration(link->handle);
- if (link->io.NumPorts1) {
- pcmcia_release_io(link->handle, &link->io);
}
- if (link->irq.AssignedIRQ) {
- pcmcia_release_irq(link->handle, &link->irq);
- }
- link->state &= ~DEV_CONFIG;
+ pcmcia_disable_device(link);
+
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,2))
if (info->host != NULL) {
scsi_host_put(info->host);
#endif
} /* nsp_cs_release */
-static int nsp_cs_suspend(struct pcmcia_device *dev)
+static int nsp_cs_suspend(struct pcmcia_device *link)
{
- dev_link_t *link = dev_to_instance(dev);
scsi_info_t *info = link->priv;
nsp_hw_data *data;
- link->state |= DEV_SUSPEND;
-
nsp_dbg(NSP_DEBUG_INIT, "event: suspend");
if (info->host != NULL) {
info->stop = 1;
- if (link->state & DEV_CONFIG)
- pcmcia_release_configuration(link->handle);
-
return 0;
}
-static int nsp_cs_resume(struct pcmcia_device *dev)
+static int nsp_cs_resume(struct pcmcia_device *link)
{
- dev_link_t *link = dev_to_instance(dev);
scsi_info_t *info = link->priv;
nsp_hw_data *data;
nsp_dbg(NSP_DEBUG_INIT, "event: resume");
- link->state &= ~DEV_SUSPEND;
-
- if (link->state & DEV_CONFIG)
- pcmcia_request_configuration(link->handle, &link->conf);
-
info->stop = 0;
if (info->host != NULL) {
.drv = {
.name = "nsp_cs",
},
- .probe = nsp_cs_attach,
+ .probe = nsp_cs_probe,
.remove = nsp_cs_detach,
.id_table = nsp_cs_ids,
.suspend = nsp_cs_suspend,
static void __exit nsp_cs_exit(void)
{
nsp_msg(KERN_INFO, "unloading...");
-
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,68))
pcmcia_unregister_driver(&nsp_driver);
-#else
- unregister_pcmcia_driver(&dev_info);
- /* XXX: this really needs to move into generic code.. */
- while (dev_list != NULL) {
- if (dev_list->state & DEV_CONFIG) {
- nsp_cs_release(dev_list);
- }
- nsp_cs_detach(dev_list);
- }
-#endif
}
git://git.onelab.eu / linux-2.6.git / blobdiff