/*
- * QLOGIC LINUX SOFTWARE
- *
- * QLogic ISP2x00 device driver for Linux 2.6.x
- * Copyright (C) 2003-2004 QLogic Corporation
- * (www.qlogic.com)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
+ * QLogic Fibre Channel HBA Driver
+ * Copyright (c) 2003-2005 QLogic Corporation
*
+ * See LICENSE.qla2xxx for copyright and licensing details.
*/
#include "qla_def.h"
#include <linux/delay.h>
-#include <scsi/scsi_transport_fc.h>
+#include <linux/vmalloc.h>
#include "qla_devtbl.h"
/*
* QLogic ISP2x00 Hardware Support Function Prototypes.
*/
-static int qla2x00_pci_config(scsi_qla_host_t *);
static int qla2x00_isp_firmware(scsi_qla_host_t *);
-static void qla2x00_reset_chip(scsi_qla_host_t *);
-static int qla2x00_chip_diag(scsi_qla_host_t *);
static void qla2x00_resize_request_q(scsi_qla_host_t *);
static int qla2x00_setup_chip(scsi_qla_host_t *);
static void qla2x00_init_response_q_entries(scsi_qla_host_t *);
static int qla2x00_init_rings(scsi_qla_host_t *);
static int qla2x00_fw_ready(scsi_qla_host_t *);
static int qla2x00_configure_hba(scsi_qla_host_t *);
-static int qla2x00_nvram_config(scsi_qla_host_t *);
static int qla2x00_configure_loop(scsi_qla_host_t *);
static int qla2x00_configure_local_loop(scsi_qla_host_t *);
-static void qla2x00_update_fcport(scsi_qla_host_t *, fc_port_t *);
static int qla2x00_configure_fabric(scsi_qla_host_t *);
static int qla2x00_find_all_fabric_devs(scsi_qla_host_t *, struct list_head *);
static int qla2x00_device_resync(scsi_qla_host_t *);
uint16_t *);
static int qla2x00_restart_isp(scsi_qla_host_t *);
-static void qla2x00_reset_adapter(scsi_qla_host_t *);
/****************************************************************************/
/* QLogic ISP2x00 Hardware Support Functions. */
atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
atomic_set(&ha->loop_state, LOOP_DOWN);
ha->device_flags = 0;
- ha->sns_retry_cnt = 0;
ha->dpc_flags = 0;
- ha->failback_delay = 0;
ha->flags.management_server_logged_in = 0;
ha->marker_needed = 0;
ha->mbx_flags = 0;
ha->isp_abort_cnt = 0;
ha->beacon_blink_led = 0;
+ set_bit(REGISTER_FDMI_NEEDED, &ha->dpc_flags);
- rval = qla2x00_pci_config(ha);
+ qla_printk(KERN_INFO, ha, "Configuring PCI space...\n");
+ rval = ha->isp_ops.pci_config(ha);
if (rval) {
DEBUG2(printk("scsi(%ld): Unable to configure PCI space=n",
ha->host_no));
return (rval);
}
- qla2x00_reset_chip(ha);
+ ha->isp_ops.reset_chip(ha);
qla_printk(KERN_INFO, ha, "Configure NVRAM parameters...\n");
- qla2x00_nvram_config(ha);
+
+ ha->isp_ops.nvram_config(ha);
qla_printk(KERN_INFO, ha, "Verifying loaded RISC code...\n");
/* If firmware needs to be loaded */
if (qla2x00_isp_firmware(ha) != QLA_SUCCESS) {
- if ((rval = qla2x00_chip_diag(ha)) == QLA_SUCCESS) {
+ if ((rval = ha->isp_ops.chip_diag(ha)) == QLA_SUCCESS) {
rval = qla2x00_setup_chip(ha);
}
}
(rval = qla2x00_init_rings(ha)) == QLA_SUCCESS) {
check_fw_ready_again:
/*
- * Wait for a successful LIP up to a maximum
+ * Wait for a successful LIP up to a maximum
* of (in seconds): RISC login timeout value,
* RISC retry count value, and port down retry
- * value OR a minimum of 4 seconds OR If no
+ * value OR a minimum of 4 seconds OR If no
* cable, only 5 seconds.
*/
rval = qla2x00_fw_ready(ha);
if (rval == QLA_SUCCESS) {
clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
+ /* Issue a marker after FW becomes ready. */
+ qla2x00_marker(ha, 0, 0, MK_SYNC_ALL);
+
/*
* Wait at most MAX_TARGET RSCNs for a stable
* link.
* LIP to complete
*/
- if (atomic_read(&ha->loop_state) ==
- LOOP_DOWN && retry--) {
+ if (atomic_read(&ha->loop_state) !=
+ LOOP_READY && retry--) {
goto check_fw_ready_again;
}
wait_time--;
if (wait_time == 0)
rval = QLA_FUNCTION_FAILED;
- if (ha->mem_err)
- restart_risc = 1;
} else if (ha->device_flags & DFLG_NO_CABLE)
/* If no cable, then all is good. */
rval = QLA_SUCCESS;
if (rval == QLA_SUCCESS) {
clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
- ha->marker_needed = 1;
qla2x00_marker(ha, 0, 0, MK_SYNC_ALL);
ha->marker_needed = 0;
}
/**
- * qla2x00_pci_config() - Setup device PCI configuration registers.
+ * qla2100_pci_config() - Setup ISP21xx PCI configuration registers.
* @ha: HA context
*
* Returns 0 on success.
*/
-static int
-qla2x00_pci_config(scsi_qla_host_t *ha)
+int
+qla2100_pci_config(scsi_qla_host_t *ha)
{
- uint16_t w, mwi;
- unsigned long flags = 0;
- uint32_t cnt;
-
- qla_printk(KERN_INFO, ha, "Configuring PCI space...\n");
+ uint16_t w, mwi;
+ uint32_t d;
+ unsigned long flags;
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
- /*
- * Turn on PCI master; for system BIOSes that don't turn it on by
- * default.
- */
pci_set_master(ha->pdev);
mwi = 0;
if (pci_set_mwi(ha->pdev))
mwi = PCI_COMMAND_INVALIDATE;
pci_read_config_word(ha->pdev, PCI_REVISION_ID, &ha->revision);
- if (!ha->iobase)
- return (QLA_FUNCTION_FAILED);
-
- /*
- * We want to respect framework's setting of PCI configuration space
- * command register and also want to make sure that all bits of
- * interest to us are properly set in command register.
- */
pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
w |= mwi | (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
+ pci_write_config_word(ha->pdev, PCI_COMMAND, w);
+
+ /* Reset expansion ROM address decode enable */
+ pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d);
+ d &= ~PCI_ROM_ADDRESS_ENABLE;
+ pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d);
/* Get PCI bus information. */
spin_lock_irqsave(&ha->hardware_lock, flags);
- ha->pci_attr = RD_REG_WORD(&ha->iobase->ctrl_status);
+ ha->pci_attr = RD_REG_WORD(®->ctrl_status);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
- if (!IS_QLA2100(ha) && !IS_QLA2200(ha)) {
- pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80);
+ return QLA_SUCCESS;
+}
+
+/**
+ * qla2300_pci_config() - Setup ISP23xx PCI configuration registers.
+ * @ha: HA context
+ *
+ * Returns 0 on success.
+ */
+int
+qla2300_pci_config(scsi_qla_host_t *ha)
+{
+ uint16_t w, mwi;
+ uint32_t d;
+ unsigned long flags = 0;
+ uint32_t cnt;
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
- /* PCI Specification Revision 2.3 changes */
- if (IS_QLA2322(ha) || IS_QLA6322(ha))
- /* Command Register - Reset Interrupt Disable. */
- w &= ~PCI_COMMAND_INTX_DISABLE;
+ pci_set_master(ha->pdev);
+ mwi = 0;
+ if (pci_set_mwi(ha->pdev))
+ mwi = PCI_COMMAND_INVALIDATE;
+ pci_read_config_word(ha->pdev, PCI_REVISION_ID, &ha->revision);
- /*
- * If this is a 2300 card and not 2312, reset the
- * COMMAND_INVALIDATE due to a bug in the 2300. Unfortunately,
- * the 2310 also reports itself as a 2300 so we need to get the
- * fb revision level -- a 6 indicates it really is a 2300 and
- * not a 2310.
- */
- if (IS_QLA2300(ha)) {
- spin_lock_irqsave(&ha->hardware_lock, flags);
+ pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
+ w |= mwi | (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
- /* Pause RISC. */
- WRT_REG_WORD(&ha->iobase->hccr, HCCR_PAUSE_RISC);
- for (cnt = 0; cnt < 30000; cnt++) {
- if ((RD_REG_WORD(&ha->iobase->hccr) &
- HCCR_RISC_PAUSE) != 0)
- break;
-
- udelay(10);
- }
+ if (IS_QLA2322(ha) || IS_QLA6322(ha))
+ w &= ~PCI_COMMAND_INTX_DISABLE;
- /* Select FPM registers. */
- WRT_REG_WORD(&ha->iobase->ctrl_status, 0x20);
- RD_REG_WORD(&ha->iobase->ctrl_status);
+ /*
+ * If this is a 2300 card and not 2312, reset the
+ * COMMAND_INVALIDATE due to a bug in the 2300. Unfortunately,
+ * the 2310 also reports itself as a 2300 so we need to get the
+ * fb revision level -- a 6 indicates it really is a 2300 and
+ * not a 2310.
+ */
+ if (IS_QLA2300(ha)) {
+ spin_lock_irqsave(&ha->hardware_lock, flags);
- /* Get the fb rev level */
- ha->fb_rev = RD_FB_CMD_REG(ha, ha->iobase);
+ /* Pause RISC. */
+ WRT_REG_WORD(®->hccr, HCCR_PAUSE_RISC);
+ for (cnt = 0; cnt < 30000; cnt++) {
+ if ((RD_REG_WORD(®->hccr) & HCCR_RISC_PAUSE) != 0)
+ break;
- if (ha->fb_rev == FPM_2300)
- w &= ~PCI_COMMAND_INVALIDATE;
+ udelay(10);
+ }
- /* Deselect FPM registers. */
- WRT_REG_WORD(&ha->iobase->ctrl_status, 0x0);
- RD_REG_WORD(&ha->iobase->ctrl_status);
+ /* Select FPM registers. */
+ WRT_REG_WORD(®->ctrl_status, 0x20);
+ RD_REG_WORD(®->ctrl_status);
- /* Release RISC module. */
- WRT_REG_WORD(&ha->iobase->hccr, HCCR_RELEASE_RISC);
- for (cnt = 0; cnt < 30000; cnt++) {
- if ((RD_REG_WORD(&ha->iobase->hccr) &
- HCCR_RISC_PAUSE) == 0)
- break;
-
- udelay(10);
- }
+ /* Get the fb rev level */
+ ha->fb_rev = RD_FB_CMD_REG(ha, reg);
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
+ if (ha->fb_rev == FPM_2300)
+ w &= ~PCI_COMMAND_INVALIDATE;
+
+ /* Deselect FPM registers. */
+ WRT_REG_WORD(®->ctrl_status, 0x0);
+ RD_REG_WORD(®->ctrl_status);
+
+ /* Release RISC module. */
+ WRT_REG_WORD(®->hccr, HCCR_RELEASE_RISC);
+ for (cnt = 0; cnt < 30000; cnt++) {
+ if ((RD_REG_WORD(®->hccr) & HCCR_RISC_PAUSE) == 0)
+ break;
+
+ udelay(10);
}
+
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
+ pci_write_config_word(ha->pdev, PCI_COMMAND, w);
+
+ pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80);
+
+ /* Reset expansion ROM address decode enable */
+ pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d);
+ d &= ~PCI_ROM_ADDRESS_ENABLE;
+ pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d);
+
+ /* Get PCI bus information. */
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ ha->pci_attr = RD_REG_WORD(®->ctrl_status);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+ return QLA_SUCCESS;
+}
+
+/**
+ * qla24xx_pci_config() - Setup ISP24xx PCI configuration registers.
+ * @ha: HA context
+ *
+ * Returns 0 on success.
+ */
+int
+qla24xx_pci_config(scsi_qla_host_t *ha)
+{
+ uint16_t w, mwi;
+ uint32_t d;
+ unsigned long flags = 0;
+ struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
+ int pcix_cmd_reg, pcie_dctl_reg;
+
+ pci_set_master(ha->pdev);
+ mwi = 0;
+ if (pci_set_mwi(ha->pdev))
+ mwi = PCI_COMMAND_INVALIDATE;
+ pci_read_config_word(ha->pdev, PCI_REVISION_ID, &ha->revision);
+ pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
+ w |= mwi | (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
+ w &= ~PCI_COMMAND_INTX_DISABLE;
pci_write_config_word(ha->pdev, PCI_COMMAND, w);
+ pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80);
+
+ /* PCI-X -- adjust Maximum Memory Read Byte Count (2048). */
+ pcix_cmd_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_PCIX);
+ if (pcix_cmd_reg) {
+ uint16_t pcix_cmd;
+
+ pcix_cmd_reg += PCI_X_CMD;
+ pci_read_config_word(ha->pdev, pcix_cmd_reg, &pcix_cmd);
+ pcix_cmd &= ~PCI_X_CMD_MAX_READ;
+ pcix_cmd |= 0x0008;
+ pci_write_config_word(ha->pdev, pcix_cmd_reg, pcix_cmd);
+ }
+
+ /* PCIe -- adjust Maximum Read Request Size (2048). */
+ pcie_dctl_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP);
+ if (pcie_dctl_reg) {
+ uint16_t pcie_dctl;
+
+ pcie_dctl_reg += PCI_EXP_DEVCTL;
+ pci_read_config_word(ha->pdev, pcie_dctl_reg, &pcie_dctl);
+ pcie_dctl &= ~PCI_EXP_DEVCTL_READRQ;
+ pcie_dctl |= 0x4000;
+ pci_write_config_word(ha->pdev, pcie_dctl_reg, pcie_dctl);
+ }
+
/* Reset expansion ROM address decode enable */
- pci_read_config_word(ha->pdev, PCI_ROM_ADDRESS, &w);
- w &= ~PCI_ROM_ADDRESS_ENABLE;
- pci_write_config_word(ha->pdev, PCI_ROM_ADDRESS, w);
+ pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d);
+ d &= ~PCI_ROM_ADDRESS_ENABLE;
+ pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d);
+
+ /* Get PCI bus information. */
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ ha->pci_attr = RD_REG_DWORD(®->ctrl_status);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
- return (QLA_SUCCESS);
+ return QLA_SUCCESS;
}
/**
int rval;
/* Assume loading risc code */
- rval = QLA_FUNCTION_FAILED;
+ rval = QLA_FUNCTION_FAILED;
if (ha->flags.disable_risc_code_load) {
DEBUG2(printk("scsi(%ld): RISC CODE NOT loaded\n",
qla_printk(KERN_INFO, ha, "RISC CODE NOT loaded\n");
/* Verify checksum of loaded RISC code. */
- rval = qla2x00_verify_checksum(ha);
+ rval = qla2x00_verify_checksum(ha,
+ IS_QLA24XX(ha) || IS_QLA54XX(ha) ? RISC_SADDRESS :
+ *ha->brd_info->fw_info[0].fwstart);
}
if (rval) {
*
* Returns 0 on success.
*/
-static void
-qla2x00_reset_chip(scsi_qla_host_t *ha)
+void
+qla2x00_reset_chip(scsi_qla_host_t *ha)
{
unsigned long flags = 0;
- device_reg_t __iomem *reg = ha->iobase;
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
uint32_t cnt;
unsigned long mbx_flags = 0;
uint16_t cmd;
- /* Disable ISP interrupts. */
- qla2x00_disable_intrs(ha);
+ ha->isp_ops.disable_intrs(ha);
spin_lock_irqsave(&ha->hardware_lock, flags);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
+/**
+ * qla24xx_reset_risc() - Perform full reset of ISP24xx RISC.
+ * @ha: HA context
+ *
+ * Returns 0 on success.
+ */
+static inline void
+qla24xx_reset_risc(scsi_qla_host_t *ha)
+{
+ unsigned long flags = 0;
+ struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
+ uint32_t cnt, d2;
+ uint16_t wd;
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+
+ /* Reset RISC. */
+ WRT_REG_DWORD(®->ctrl_status, CSRX_DMA_SHUTDOWN|MWB_4096_BYTES);
+ for (cnt = 0; cnt < 30000; cnt++) {
+ if ((RD_REG_DWORD(®->ctrl_status) & CSRX_DMA_ACTIVE) == 0)
+ break;
+
+ udelay(10);
+ }
+
+ WRT_REG_DWORD(®->ctrl_status,
+ CSRX_ISP_SOFT_RESET|CSRX_DMA_SHUTDOWN|MWB_4096_BYTES);
+ pci_read_config_word(ha->pdev, PCI_COMMAND, &wd);
+
+ udelay(100);
+ /* Wait for firmware to complete NVRAM accesses. */
+ d2 = (uint32_t) RD_REG_WORD(®->mailbox0);
+ for (cnt = 10000 ; cnt && d2; cnt--) {
+ udelay(5);
+ d2 = (uint32_t) RD_REG_WORD(®->mailbox0);
+ barrier();
+ }
+
+ /* Wait for soft-reset to complete. */
+ d2 = RD_REG_DWORD(®->ctrl_status);
+ for (cnt = 6000000 ; cnt && (d2 & CSRX_ISP_SOFT_RESET); cnt--) {
+ udelay(5);
+ d2 = RD_REG_DWORD(®->ctrl_status);
+ barrier();
+ }
+
+ WRT_REG_DWORD(®->hccr, HCCRX_SET_RISC_RESET);
+ RD_REG_DWORD(®->hccr);
+
+ WRT_REG_DWORD(®->hccr, HCCRX_REL_RISC_PAUSE);
+ RD_REG_DWORD(®->hccr);
+
+ WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_RESET);
+ RD_REG_DWORD(®->hccr);
+
+ d2 = (uint32_t) RD_REG_WORD(®->mailbox0);
+ for (cnt = 6000000 ; cnt && d2; cnt--) {
+ udelay(5);
+ d2 = (uint32_t) RD_REG_WORD(®->mailbox0);
+ barrier();
+ }
+
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+}
+
+/**
+ * qla24xx_reset_chip() - Reset ISP24xx chip.
+ * @ha: HA context
+ *
+ * Returns 0 on success.
+ */
+void
+qla24xx_reset_chip(scsi_qla_host_t *ha)
+{
+ ha->isp_ops.disable_intrs(ha);
+
+ /* Perform RISC reset. */
+ qla24xx_reset_risc(ha);
+}
+
/**
* qla2x00_chip_diag() - Test chip for proper operation.
* @ha: HA context
*
* Returns 0 on success.
*/
-static int
+int
qla2x00_chip_diag(scsi_qla_host_t *ha)
{
int rval;
- device_reg_t __iomem *reg = ha->iobase;
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
unsigned long flags = 0;
uint16_t data;
uint32_t cnt;
for (cnt = 6000000; cnt && (data == MBS_BUSY); cnt--) {
udelay(5);
data = RD_MAILBOX_REG(ha, reg, 0);
- barrier();
+ barrier();
}
} else
udelay(10);
DEBUG3(printk("scsi(%ld): Found QLA2200A chip.\n",
ha->host_no));
+ ha->device_type |= DT_ISP2200A;
ha->fw_transfer_size = 128;
}
return (rval);
}
+/**
+ * qla24xx_chip_diag() - Test ISP24xx for proper operation.
+ * @ha: HA context
+ *
+ * Returns 0 on success.
+ */
+int
+qla24xx_chip_diag(scsi_qla_host_t *ha)
+{
+ int rval;
+
+ /* Perform RISC reset. */
+ qla24xx_reset_risc(ha);
+
+ ha->fw_transfer_size = REQUEST_ENTRY_SIZE * 1024;
+
+ rval = qla2x00_mbx_reg_test(ha);
+ if (rval) {
+ DEBUG(printk("scsi(%ld): Failed mailbox send register test\n",
+ ha->host_no));
+ qla_printk(KERN_WARNING, ha,
+ "Failed mailbox send register test\n");
+ } else {
+ /* Flag a successful rval */
+ rval = QLA_SUCCESS;
+ }
+
+ return rval;
+}
+
+static void
+qla2x00_alloc_fw_dump(scsi_qla_host_t *ha)
+{
+ ha->fw_dumped = 0;
+ ha->fw_dump24_len = sizeof(struct qla24xx_fw_dump);
+ ha->fw_dump24_len += (ha->fw_memory_size - 0x100000) * sizeof(uint32_t);
+ ha->fw_dump24 = vmalloc(ha->fw_dump24_len);
+ if (ha->fw_dump24)
+ qla_printk(KERN_INFO, ha, "Allocated (%d KB) for firmware "
+ "dump...\n", ha->fw_dump24_len / 1024);
+ else
+ qla_printk(KERN_WARNING, ha, "Unable to allocate (%d KB) for "
+ "firmware dump!!!\n", ha->fw_dump24_len / 1024);
+}
+
/**
* qla2x00_resize_request_q() - Resize request queue given available ISP memory.
* @ha: HA context
if (IS_QLA2100(ha) || IS_QLA2200(ha))
return;
+ if (IS_QLA24XX(ha) || IS_QLA54XX(ha))
+ qla2x00_alloc_fw_dump(ha);
+
/* Retrieve IOCB counts available to the firmware. */
rval = qla2x00_get_resource_cnts(ha, NULL, NULL, NULL, &fw_iocb_cnt);
if (rval)
static int
qla2x00_setup_chip(scsi_qla_host_t *ha)
{
- int rval;
- uint16_t cnt;
- uint16_t *risc_code;
- unsigned long risc_address;
- unsigned long risc_code_size;
- int num;
- int i;
- uint16_t *req_ring;
- struct qla_fw_info *fw_iter;
-
- rval = QLA_SUCCESS;
+ int rval;
+ uint32_t srisc_address = 0;
/* Load firmware sequences */
- fw_iter = ha->brd_info->fw_info;
- while (fw_iter->addressing != FW_INFO_ADDR_NOMORE) {
- risc_code = fw_iter->fwcode;
- risc_code_size = *fw_iter->fwlen;
-
- if (fw_iter->addressing == FW_INFO_ADDR_NORMAL) {
- risc_address = *fw_iter->fwstart;
- } else {
- /* Extended address */
- risc_address = *fw_iter->lfwstart;
- }
-
- num = 0;
- rval = 0;
- while (risc_code_size > 0 && !rval) {
- cnt = (uint16_t)(ha->fw_transfer_size >> 1);
- if (cnt > risc_code_size)
- cnt = risc_code_size;
-
- DEBUG7(printk("scsi(%ld): Loading risc segment@ "
- "addr %p, number of bytes 0x%x, offset 0x%lx.\n",
- ha->host_no, risc_code, cnt, risc_address));
-
- req_ring = (uint16_t *)ha->request_ring;
- for (i = 0; i < cnt; i++)
- req_ring[i] = cpu_to_le16(risc_code[i]);
-
- if (fw_iter->addressing == FW_INFO_ADDR_NORMAL) {
- rval = qla2x00_load_ram(ha,
- ha->request_dma, risc_address, cnt);
- } else {
- rval = qla2x00_load_ram_ext(ha,
- ha->request_dma, risc_address, cnt);
- }
- if (rval) {
- DEBUG(printk("scsi(%ld): [ERROR] Failed to "
- "load segment %d of firmware\n",
- ha->host_no, num));
- qla_printk(KERN_WARNING, ha,
- "[ERROR] Failed to load "
- "segment %d of firmware\n", num);
-
- qla2x00_dump_regs(ha);
- break;
- }
-
- risc_code += cnt;
- risc_address += cnt;
- risc_code_size -= cnt;
- num++;
- }
-
- /* Next firmware sequence */
- fw_iter++;
- }
-
- /* Verify checksum of loaded RISC code. */
- if (!rval) {
+ rval = ha->isp_ops.load_risc(ha, &srisc_address);
+ if (rval == QLA_SUCCESS) {
DEBUG(printk("scsi(%ld): Verifying Checksum of loaded RISC "
"code.\n", ha->host_no));
- rval = qla2x00_verify_checksum(ha);
+ rval = qla2x00_verify_checksum(ha, srisc_address);
if (rval == QLA_SUCCESS) {
/* Start firmware execution. */
DEBUG(printk("scsi(%ld): Checksum OK, start "
"firmware.\n", ha->host_no));
- rval = qla2x00_execute_fw(ha);
+ rval = qla2x00_execute_fw(ha, srisc_address);
/* Retrieve firmware information. */
if (rval == QLA_SUCCESS && ha->fw_major_version == 0) {
qla2x00_get_fw_version(ha,
*
* Returns 0 on success.
*/
-static void
+void
qla2x00_update_fw_options(scsi_qla_host_t *ha)
{
uint16_t swing, emphasis, tx_sens, rx_sens;
emphasis = (ha->fw_seriallink_options[2] &
(BIT_4 | BIT_3)) >> 3;
tx_sens = ha->fw_seriallink_options[0] &
- (BIT_3 | BIT_2 | BIT_1 | BIT_0);
+ (BIT_3 | BIT_2 | BIT_1 | BIT_0);
rx_sens = (ha->fw_seriallink_options[0] &
(BIT_7 | BIT_6 | BIT_5 | BIT_4)) >> 4;
ha->fw_options[10] = (emphasis << 14) | (swing << 8);
(BIT_7 | BIT_6 | BIT_5)) >> 5;
emphasis = ha->fw_seriallink_options[3] & (BIT_1 | BIT_0);
tx_sens = ha->fw_seriallink_options[1] &
- (BIT_3 | BIT_2 | BIT_1 | BIT_0);
+ (BIT_3 | BIT_2 | BIT_1 | BIT_0);
rx_sens = (ha->fw_seriallink_options[1] &
(BIT_7 | BIT_6 | BIT_5 | BIT_4)) >> 4;
ha->fw_options[11] = (emphasis << 14) | (swing << 8);
if (ha->flags.enable_led_scheme)
ha->fw_options[2] |= BIT_12;
+ /* Detect ISP6312. */
+ if (IS_QLA6312(ha))
+ ha->fw_options[2] |= BIT_13;
+
/* Update firmware options. */
qla2x00_set_fw_options(ha, ha->fw_options);
}
-/**
- * qla2x00_init_rings() - Initializes firmware.
- * @ha: HA context
- *
- * Beginning of request ring has initialization control block already built
- * by nvram config routine.
- *
- * Returns 0 on success.
- */
-static int
-qla2x00_init_rings(scsi_qla_host_t *ha)
+void
+qla24xx_update_fw_options(scsi_qla_host_t *ha)
{
- int rval;
- unsigned long flags = 0;
- int cnt;
- device_reg_t __iomem *reg = ha->iobase;
+ int rval;
- spin_lock_irqsave(&ha->hardware_lock, flags);
+ /* Update Serial Link options. */
+ if ((le16_to_cpu(ha->fw_seriallink_options24[0]) & BIT_0) == 0)
+ return;
+
+ rval = qla2x00_set_serdes_params(ha,
+ le16_to_cpu(ha->fw_seriallink_options24[1]),
+ le16_to_cpu(ha->fw_seriallink_options24[2]),
+ le16_to_cpu(ha->fw_seriallink_options24[3]));
+ if (rval != QLA_SUCCESS) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to update Serial Link options (%x).\n", rval);
+ }
+}
+
+void
+qla2x00_config_rings(struct scsi_qla_host *ha)
+{
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+
+ /* Setup ring parameters in initialization control block. */
+ ha->init_cb->request_q_outpointer = __constant_cpu_to_le16(0);
+ ha->init_cb->response_q_inpointer = __constant_cpu_to_le16(0);
+ ha->init_cb->request_q_length = cpu_to_le16(ha->request_q_length);
+ ha->init_cb->response_q_length = cpu_to_le16(ha->response_q_length);
+ ha->init_cb->request_q_address[0] = cpu_to_le32(LSD(ha->request_dma));
+ ha->init_cb->request_q_address[1] = cpu_to_le32(MSD(ha->request_dma));
+ ha->init_cb->response_q_address[0] = cpu_to_le32(LSD(ha->response_dma));
+ ha->init_cb->response_q_address[1] = cpu_to_le32(MSD(ha->response_dma));
+
+ WRT_REG_WORD(ISP_REQ_Q_IN(ha, reg), 0);
+ WRT_REG_WORD(ISP_REQ_Q_OUT(ha, reg), 0);
+ WRT_REG_WORD(ISP_RSP_Q_IN(ha, reg), 0);
+ WRT_REG_WORD(ISP_RSP_Q_OUT(ha, reg), 0);
+ RD_REG_WORD(ISP_RSP_Q_OUT(ha, reg)); /* PCI Posting. */
+}
+
+void
+qla24xx_config_rings(struct scsi_qla_host *ha)
+{
+ struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
+ struct init_cb_24xx *icb;
+
+ /* Setup ring parameters in initialization control block. */
+ icb = (struct init_cb_24xx *)ha->init_cb;
+ icb->request_q_outpointer = __constant_cpu_to_le16(0);
+ icb->response_q_inpointer = __constant_cpu_to_le16(0);
+ icb->request_q_length = cpu_to_le16(ha->request_q_length);
+ icb->response_q_length = cpu_to_le16(ha->response_q_length);
+ icb->request_q_address[0] = cpu_to_le32(LSD(ha->request_dma));
+ icb->request_q_address[1] = cpu_to_le32(MSD(ha->request_dma));
+ icb->response_q_address[0] = cpu_to_le32(LSD(ha->response_dma));
+ icb->response_q_address[1] = cpu_to_le32(MSD(ha->response_dma));
+
+ WRT_REG_DWORD(®->req_q_in, 0);
+ WRT_REG_DWORD(®->req_q_out, 0);
+ WRT_REG_DWORD(®->rsp_q_in, 0);
+ WRT_REG_DWORD(®->rsp_q_out, 0);
+ RD_REG_DWORD(®->rsp_q_out);
+}
+
+/**
+ * qla2x00_init_rings() - Initializes firmware.
+ * @ha: HA context
+ *
+ * Beginning of request ring has initialization control block already built
+ * by nvram config routine.
+ *
+ * Returns 0 on success.
+ */
+static int
+qla2x00_init_rings(scsi_qla_host_t *ha)
+{
+ int rval;
+ unsigned long flags = 0;
+ int cnt;
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
/* Clear outstanding commands array. */
for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++)
ha->response_ring_ptr = ha->response_ring;
ha->rsp_ring_index = 0;
- /* Setup ring parameters in initialization control block. */
- ha->init_cb->request_q_outpointer = __constant_cpu_to_le16(0);
- ha->init_cb->response_q_inpointer = __constant_cpu_to_le16(0);
- ha->init_cb->request_q_length = cpu_to_le16(ha->request_q_length);
- ha->init_cb->response_q_length = cpu_to_le16(ha->response_q_length);
- ha->init_cb->request_q_address[0] = cpu_to_le32(LSD(ha->request_dma));
- ha->init_cb->request_q_address[1] = cpu_to_le32(MSD(ha->request_dma));
- ha->init_cb->response_q_address[0] = cpu_to_le32(LSD(ha->response_dma));
- ha->init_cb->response_q_address[1] = cpu_to_le32(MSD(ha->response_dma));
-
/* Initialize response queue entries */
qla2x00_init_response_q_entries(ha);
- WRT_REG_WORD(ISP_REQ_Q_IN(ha, reg), 0);
- WRT_REG_WORD(ISP_REQ_Q_OUT(ha, reg), 0);
- WRT_REG_WORD(ISP_RSP_Q_IN(ha, reg), 0);
- WRT_REG_WORD(ISP_RSP_Q_OUT(ha, reg), 0);
- RD_REG_WORD(ISP_RSP_Q_OUT(ha, reg)); /* PCI Posting. */
+ ha->isp_ops.config_rings(ha);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
/* Update any ISP specific firmware options before initialization. */
- qla2x00_update_fw_options(ha);
+ ha->isp_ops.update_fw_options(ha);
DEBUG(printk("scsi(%ld): Issue init firmware.\n", ha->host_no));
- rval = qla2x00_init_firmware(ha, sizeof(init_cb_t));
+ rval = qla2x00_init_firmware(ha, ha->init_cb_size);
if (rval) {
DEBUG2_3(printk("scsi(%ld): Init firmware **** FAILED ****.\n",
ha->host_no));
rval = QLA_SUCCESS;
/* 20 seconds for loop down. */
- min_wait = 20;
+ min_wait = 20;
/*
* Firmware should take at most one RATOV to login, plus 5 seconds for
(fw_state >= FSTATE_LOSS_OF_SYNC ||
fw_state == FSTATE_WAIT_AL_PA)) {
/* Loop down. Timeout on min_wait for states
- * other than Wait for Login.
- */
+ * other than Wait for Login.
+ */
if (time_after_eq(jiffies, mtime)) {
qla_printk(KERN_INFO, ha,
"Cable is unplugged...\n");
rval = qla2x00_get_adapter_id(ha,
&loop_id, &al_pa, &area, &domain, &topo);
if (rval != QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
- "ERROR -- Unable to get host loop ID.\n");
- set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
+ if (LOOP_TRANSITION(ha) || atomic_read(&ha->loop_down_timer) ||
+ (rval == QLA_COMMAND_ERROR && loop_id == 0x7)) {
+ DEBUG2(printk("%s(%ld) Loop is in a transition state\n",
+ __func__, ha->host_no));
+ } else {
+ qla_printk(KERN_WARNING, ha,
+ "ERROR -- Unable to get host loop ID.\n");
+ set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
+ }
return (rval);
}
* Returns:
* 0 = success.
*/
-static int
+int
qla2x00_nvram_config(scsi_qla_host_t *ha)
{
- int rval;
- uint8_t chksum = 0;
- uint16_t cnt;
- uint8_t *dptr1, *dptr2;
- init_cb_t *icb = ha->init_cb;
- nvram_t *nv = (nvram_t *)ha->request_ring;
- uint16_t *wptr = (uint16_t *)ha->request_ring;
- device_reg_t __iomem *reg = ha->iobase;
- uint8_t timer_mode;
+ int rval;
+ uint8_t chksum = 0;
+ uint16_t cnt;
+ uint8_t *dptr1, *dptr2;
+ init_cb_t *icb = ha->init_cb;
+ nvram_t *nv = (nvram_t *)ha->request_ring;
+ uint8_t *ptr = (uint8_t *)ha->request_ring;
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
rval = QLA_SUCCESS;
/* Determine NVRAM starting address. */
+ ha->nvram_size = sizeof(nvram_t);
ha->nvram_base = 0;
if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha))
if ((RD_REG_WORD(®->ctrl_status) >> 14) == 1)
ha->nvram_base = 0x80;
/* Get NVRAM data and calculate checksum. */
- qla2x00_lock_nvram_access(ha);
- for (cnt = 0; cnt < sizeof(nvram_t)/2; cnt++) {
- *wptr = cpu_to_le16(qla2x00_get_nvram_word(ha,
- (cnt+ha->nvram_base)));
- chksum += (uint8_t)*wptr;
- chksum += (uint8_t)(*wptr >> 8);
- wptr++;
- }
- qla2x00_unlock_nvram_access(ha);
+ ha->isp_ops.read_nvram(ha, ptr, ha->nvram_base, ha->nvram_size);
+ for (cnt = 0, chksum = 0; cnt < ha->nvram_size; cnt++)
+ chksum += *ptr++;
DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no));
DEBUG5(qla2x00_dump_buffer((uint8_t *)ha->request_ring,
- sizeof(nvram_t)));
+ ha->nvram_size));
/* Bad NVRAM data, set defaults parameters. */
if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' ||
/*
* Set default initialization control block.
*/
- memset(nv, 0, sizeof(nvram_t));
+ memset(nv, 0, ha->nvram_size);
nv->parameter_block_version = ICB_VERSION;
if (IS_QLA23XX(ha)) {
#endif
/* Reset Initialization control block */
- memset(icb, 0, sizeof(init_cb_t));
+ memset(icb, 0, ha->init_cb_size);
/*
* Setup driver NVRAM options.
if (IS_QLA23XX(ha)) {
nv->firmware_options[0] |= BIT_2;
nv->firmware_options[0] &= ~BIT_3;
+ nv->add_firmware_options[1] |= BIT_5 | BIT_4;
if (IS_QLA2300(ha)) {
if (ha->fb_rev == FPM_2310) {
index = (ha->pdev->subsystem_device & 0xff);
if (index < QLA_MODEL_NAMES) {
strcpy(ha->model_number,
- qla2x00_model_name[index]);
+ qla2x00_model_name[index * 2]);
ha->model_desc =
- qla2x00_model_desc[index];
+ qla2x00_model_name[index * 2 + 1];
} else {
strcpy(ha->model_number, "QLA23xx");
}
/*
* Set host adapter parameters.
*/
- ha->nvram_version = nv->nvram_version;
-
ha->flags.disable_risc_code_load = ((nv->host_p[0] & BIT_4) ? 1 : 0);
/* Always load RISC code on non ISP2[12]00 chips. */
if (!IS_QLA2100(ha) && !IS_QLA2200(ha))
ha->flags.enable_lip_reset = ((nv->host_p[1] & BIT_1) ? 1 : 0);
ha->flags.enable_lip_full_login = ((nv->host_p[1] & BIT_2) ? 1 : 0);
ha->flags.enable_target_reset = ((nv->host_p[1] & BIT_3) ? 1 : 0);
- ha->flags.enable_led_scheme = ((nv->efi_parameters & BIT_3) ? 1 : 0);
+ ha->flags.enable_led_scheme = (nv->special_options[1] & BIT_4) ? 1 : 0;
ha->operating_mode =
(icb->add_firmware_options[0] & (BIT_6 | BIT_5 | BIT_4)) >> 4;
ha->serial0 = icb->port_name[5];
ha->serial1 = icb->port_name[6];
ha->serial2 = icb->port_name[7];
- memcpy(ha->node_name, icb->node_name, WWN_SIZE);
+ ha->node_name = icb->node_name;
+ ha->port_name = icb->port_name;
icb->execution_throttle = __constant_cpu_to_le16(0xFFFF);
/* Set minimum RATOV to 200 tenths of a second. */
ha->r_a_tov = 200;
- ha->minimum_timeout =
- (ha->login_timeout * ha->retry_count) + nv->port_down_retry_count;
ha->loop_reset_delay = nv->reset_delay;
- /* Will get the value from NVRAM. */
- ha->loop_down_timeout = LOOP_DOWN_TIMEOUT;
-
/* Link Down Timeout = 0:
*
* When Port Down timer expires we will start returning
*
* The driver waits for the link to come up after link down
* before returning I/Os to OS with "DID_NO_CONNECT".
- */
+ */
if (nv->link_down_timeout == 0) {
ha->loop_down_abort_time =
- (LOOP_DOWN_TIME - ha->loop_down_timeout);
+ (LOOP_DOWN_TIME - LOOP_DOWN_TIMEOUT);
} else {
ha->link_down_timeout = nv->link_down_timeout;
ha->loop_down_abort_time =
(LOOP_DOWN_TIME - ha->link_down_timeout);
- }
-
- ha->max_luns = MAX_LUNS;
- ha->max_probe_luns = le16_to_cpu(nv->max_luns_per_target);
- if (ha->max_probe_luns == 0)
- ha->max_probe_luns = MIN_LUNS;
+ }
/*
* Need enough time to try and get the port back.
if (ql2xloginretrycount)
ha->login_retry_count = ql2xloginretrycount;
- ha->binding_type = Bind;
- if (ha->binding_type != BIND_BY_PORT_NAME &&
- ha->binding_type != BIND_BY_PORT_ID) {
- qla_printk(KERN_WARNING, ha,
- "Invalid binding type specified (%d), "
- "defaulting to BIND_BY_PORT_NAME!!!\n", ha->binding_type);
-
- ha->binding_type = BIND_BY_PORT_NAME;
- }
-
icb->lun_enables = __constant_cpu_to_le16(0);
icb->command_resource_count = 0;
icb->immediate_notify_resource_count = 0;
ha->flags.process_response_queue = 1;
} else {
- /* Enable ZIO -- Support mode 5 only. */
- timer_mode = icb->add_firmware_options[0] &
- (BIT_3 | BIT_2 | BIT_1 | BIT_0);
+ /* Enable ZIO. */
+ if (!ha->flags.init_done) {
+ ha->zio_mode = icb->add_firmware_options[0] &
+ (BIT_3 | BIT_2 | BIT_1 | BIT_0);
+ ha->zio_timer = icb->interrupt_delay_timer ?
+ icb->interrupt_delay_timer: 2;
+ }
icb->add_firmware_options[0] &=
~(BIT_3 | BIT_2 | BIT_1 | BIT_0);
- if (ql2xenablezio)
- timer_mode = BIT_2 | BIT_0;
- if (timer_mode == (BIT_2 | BIT_0)) {
- DEBUG2(printk("scsi(%ld): ZIO enabled; timer delay "
- "(%d).\n", ha->host_no, ql2xintrdelaytimer));
+ ha->flags.process_response_queue = 0;
+ if (ha->zio_mode != QLA_ZIO_DISABLED) {
+ ha->zio_mode = QLA_ZIO_MODE_6;
+
+ DEBUG2(printk("scsi(%ld): ZIO mode %d enabled; timer "
+ "delay (%d us).\n", ha->host_no, ha->zio_mode,
+ ha->zio_timer * 100));
qla_printk(KERN_INFO, ha,
- "ZIO enabled; timer delay (%d).\n",
- ql2xintrdelaytimer);
+ "ZIO mode %d enabled; timer delay (%d us).\n",
+ ha->zio_mode, ha->zio_timer * 100);
- icb->add_firmware_options[0] |= timer_mode;
- icb->interrupt_delay_timer = ql2xintrdelaytimer;
+ icb->add_firmware_options[0] |= (uint8_t)ha->zio_mode;
+ icb->interrupt_delay_timer = (uint8_t)ha->zio_timer;
ha->flags.process_response_queue = 1;
}
}
return (rval);
}
+static void
+qla2x00_rport_add(void *data)
+{
+ fc_port_t *fcport = data;
+
+ qla2x00_reg_remote_port(fcport->ha, fcport);
+}
+
+static void
+qla2x00_rport_del(void *data)
+{
+ fc_port_t *fcport = data;
+ struct fc_rport *rport;
+ unsigned long flags;
+
+ spin_lock_irqsave(&fcport->rport_lock, flags);
+ rport = fcport->drport;
+ fcport->drport = NULL;
+ spin_unlock_irqrestore(&fcport->rport_lock, flags);
+ if (rport)
+ fc_remote_port_delete(rport);
+
+}
+
/**
* qla2x00_alloc_fcport() - Allocate a generic fcport.
* @ha: HA context
* Returns a pointer to the allocated fcport, or NULL, if none available.
*/
fc_port_t *
-qla2x00_alloc_fcport(scsi_qla_host_t *ha, int flags)
+qla2x00_alloc_fcport(scsi_qla_host_t *ha, gfp_t flags)
{
fc_port_t *fcport;
fcport->iodesc_idx_sent = IODESC_INVALID_INDEX;
atomic_set(&fcport->state, FCS_UNCONFIGURED);
fcport->flags = FCF_RLC_SUPPORT;
+ fcport->supported_classes = FC_COS_UNSPECIFIED;
+ spin_lock_init(&fcport->rport_lock);
+ INIT_WORK(&fcport->rport_add_work, qla2x00_rport_add, fcport);
+ INIT_WORK(&fcport->rport_del_work, qla2x00_rport_del, fcport);
return (fcport);
}
* 2 = database was full and device was not configured.
*/
static int
-qla2x00_configure_loop(scsi_qla_host_t *ha)
+qla2x00_configure_loop(scsi_qla_host_t *ha)
{
int rval;
unsigned long flags, save_flags;
*/
clear_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags);
clear_bit(RSCN_UPDATE, &ha->dpc_flags);
- ha->mem_err = 0 ;
/* Determine what we need to do */
if (ha->current_topology == ISP_CFG_FL &&
}
if (rval == QLA_SUCCESS && test_bit(RSCN_UPDATE, &flags)) {
- if (test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)) {
+ if (LOOP_TRANSITION(ha)) {
rval = QLA_FUNCTION_FAILED;
} else {
rval = qla2x00_configure_fabric(ha);
* 0 = success.
*/
static int
-qla2x00_configure_local_loop(scsi_qla_host_t *ha)
+qla2x00_configure_local_loop(scsi_qla_host_t *ha)
{
int rval, rval2;
int found_devs;
domain = ((struct gid_list_info *)id_iter)->domain;
area = ((struct gid_list_info *)id_iter)->area;
al_pa = ((struct gid_list_info *)id_iter)->al_pa;
- if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
+ if (IS_QLA2100(ha) || IS_QLA2200(ha))
loop_id = (uint16_t)
((struct gid_list_info *)id_iter)->loop_id_2100;
- id_iter += 4;
- } else {
+ else
loop_id = le16_to_cpu(
((struct gid_list_info *)id_iter)->loop_id);
- id_iter += 6;
- }
+ id_iter += ha->gid_list_info_size;
/* Bypass reserved domain fields. */
if ((domain & 0xf0) == 0xf0)
continue;
/* Bypass if not same domain and area of adapter. */
- if (area != ha->d_id.b.area || domain != ha->d_id.b.domain)
+ if (area && domain &&
+ (area != ha->d_id.b.area || domain != ha->d_id.b.domain))
continue;
/* Bypass invalid local loop ID. */
"information -- get_port_database=%x, "
"loop_id=0x%04x\n",
ha->host_no, rval2, new_fcport->loop_id));
+ DEBUG2(printk("scsi(%ld): Scheduling resync...\n",
+ ha->host_no));
+ set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
continue;
}
}
cleanup_allocation:
- if (new_fcport)
- kfree(new_fcport);
+ kfree(new_fcport);
if (rval != QLA_SUCCESS) {
DEBUG2(printk("scsi(%ld): Configure local loop error exit: "
}
static void
-qla2x00_probe_for_all_luns(scsi_qla_host_t *ha)
+qla2x00_probe_for_all_luns(scsi_qla_host_t *ha)
{
fc_port_t *fcport;
- qla2x00_mark_all_devices_lost(ha);
+ qla2x00_mark_all_devices_lost(ha, 0);
list_for_each_entry(fcport, &ha->fcports, list) {
if (fcport->port_type != FCT_TARGET)
continue;
- qla2x00_update_fcport(ha, fcport);
+ qla2x00_update_fcport(ha, fcport);
}
}
* Context:
* Kernel context.
*/
-static void
+void
qla2x00_update_fcport(scsi_qla_host_t *ha, fc_port_t *fcport)
{
- uint16_t index;
- unsigned long flags;
- srb_t *sp;
-
fcport->ha = ha;
fcport->login_retry = 0;
fcport->port_login_retry_count = ha->port_down_retry_count *
PORT_RETRY_TIME);
fcport->flags &= ~FCF_LOGIN_NEEDED;
- /*
- * Check for outstanding cmd on tape Bypass LUN discovery if active
- * command on tape.
- */
- if (fcport->flags & FCF_TAPE_PRESENT) {
- spin_lock_irqsave(&ha->hardware_lock, flags);
- for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) {
- fc_port_t *sfcp;
-
- if ((sp = ha->outstanding_cmds[index]) != 0) {
- sfcp = sp->fcport;
- if (sfcp == fcport) {
- atomic_set(&fcport->state, FCS_ONLINE);
- spin_unlock_irqrestore(
- &ha->hardware_lock, flags);
- return;
- }
- }
- }
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
- }
-
if (fcport->port_type == FCT_INITIATOR ||
fcport->port_type == FCT_BROADCAST)
fcport->device_type = TYPE_PROCESSOR;
{
struct fc_rport_identifiers rport_ids;
struct fc_rport *rport;
+ unsigned long flags;
- if (fcport->rport) {
- fc_remote_port_unblock(fcport->rport);
+ if (fcport->drport)
+ qla2x00_rport_del(fcport);
+ if (fcport->rport)
return;
- }
- rport_ids.node_name = be64_to_cpu(*(uint64_t *)fcport->node_name);
- rport_ids.port_name = be64_to_cpu(*(uint64_t *)fcport->port_name);
+ rport_ids.node_name = wwn_to_u64(fcport->node_name);
+ rport_ids.port_name = wwn_to_u64(fcport->port_name);
rport_ids.port_id = fcport->d_id.b.domain << 16 |
fcport->d_id.b.area << 8 | fcport->d_id.b.al_pa;
+ rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
+ rport = fc_remote_port_add(ha->host, 0, &rport_ids);
+ if (!rport) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to allocate fc remote port!\n");
+ return;
+ }
+ spin_lock_irqsave(&fcport->rport_lock, flags);
+ fcport->rport = rport;
+ *((fc_port_t **)rport->dd_data) = fcport;
+ spin_unlock_irqrestore(&fcport->rport_lock, flags);
+
+ rport->supported_classes = fcport->supported_classes;
+
rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
if (fcport->port_type == FCT_INITIATOR)
rport_ids.roles |= FC_RPORT_ROLE_FCP_INITIATOR;
if (fcport->port_type == FCT_TARGET)
rport_ids.roles |= FC_RPORT_ROLE_FCP_TARGET;
+ fc_remote_port_rolechg(rport, rport_ids.roles);
- fcport->rport = rport = fc_remote_port_add(ha->host, 0, &rport_ids);
- if (!rport)
- qla_printk(KERN_WARNING, ha,
- "Unable to allocate fc remote port!\n");
-
- if (rport->scsi_target_id != -1 && rport->scsi_target_id < MAX_TARGETS)
+ if (rport->scsi_target_id != -1 &&
+ rport->scsi_target_id < ha->host->max_id)
fcport->os_target_id = rport->scsi_target_id;
-
- rport->dd_data = fcport;
}
/*
fc_port_t *fcport, *fcptemp;
uint16_t next_loopid;
uint16_t mb[MAILBOX_REGISTER_COUNT];
+ uint16_t loop_id;
LIST_HEAD(new_fcports);
/* If FL port exists, then SNS is present */
- rval = qla2x00_get_port_name(ha, SNS_FL_PORT, NULL, 0);
+ if (IS_QLA24XX(ha) || IS_QLA54XX(ha))
+ loop_id = NPH_F_PORT;
+ else
+ loop_id = SNS_FL_PORT;
+ rval = qla2x00_get_port_name(ha, loop_id, NULL, 0);
if (rval != QLA_SUCCESS) {
DEBUG2(printk("scsi(%ld): MBC_GET_PORT_NAME Failed, No FL "
"Port\n", ha->host_no));
return (QLA_SUCCESS);
}
do {
+ /* FDMI support. */
+ if (ql2xfdmienable &&
+ test_and_clear_bit(REGISTER_FDMI_NEEDED, &ha->dpc_flags))
+ qla2x00_fdmi_register(ha);
+
/* Ensure we are logged into the SNS. */
- qla2x00_login_fabric(ha, SIMPLE_NAME_SERVER, 0xff, 0xff, 0xfc,
- mb, BIT_1 | BIT_0);
+ if (IS_QLA24XX(ha) || IS_QLA54XX(ha))
+ loop_id = NPH_SNS;
+ else
+ loop_id = SIMPLE_NAME_SERVER;
+ ha->isp_ops.fabric_login(ha, loop_id, 0xff, 0xff,
+ 0xfc, mb, BIT_1 | BIT_0);
if (mb[0] != MBS_COMMAND_COMPLETE) {
DEBUG2(qla_printk(KERN_INFO, ha,
"Failed SNS login: loop_id=%x mb[0]=%x mb[1]=%x "
- "mb[2]=%x mb[6]=%x mb[7]=%x\n", SIMPLE_NAME_SERVER,
+ "mb[2]=%x mb[6]=%x mb[7]=%x\n", loop_id,
mb[0], mb[1], mb[2], mb[6], mb[7]));
return (QLA_SUCCESS);
}
if (atomic_read(&fcport->state) == FCS_DEVICE_LOST) {
qla2x00_mark_device_lost(ha, fcport,
- ql2xplogiabsentdevice);
+ ql2xplogiabsentdevice, 0);
if (fcport->loop_id != FC_NO_LOOP_ID &&
(fcport->flags & FCF_TAPE_PRESENT) == 0 &&
fcport->port_type != FCT_INITIATOR &&
fcport->port_type != FCT_BROADCAST) {
-
- qla2x00_fabric_logout(ha,
- fcport->loop_id);
+ ha->isp_ops.fabric_logout(ha,
+ fcport->loop_id,
+ fcport->d_id.b.domain,
+ fcport->d_id.b.area,
+ fcport->d_id.b.al_pa);
fcport->loop_id = FC_NO_LOOP_ID;
}
}
break;
}
}
-
/* Login and update database */
qla2x00_fabric_dev_login(ha, fcport, &next_loopid);
}
/* Allocate temporary fcport for any new fcports discovered. */
new_fcport = qla2x00_alloc_fcport(ha, GFP_KERNEL);
if (new_fcport == NULL) {
- if (swl)
- kfree(swl);
+ kfree(swl);
return (QLA_MEMORY_ALLOC_FAILED);
}
new_fcport->flags |= (FCF_FABRIC_DEVICE | FCF_LOGIN_NEEDED);
/* Starting free loop ID. */
loop_id = ha->min_external_loopid;
-
for (; loop_id <= ha->last_loop_id; loop_id++) {
- if (RESERVED_LOOP_ID(loop_id))
+ if (qla2x00_is_reserved_id(ha, loop_id))
continue;
- if (atomic_read(&ha->loop_down_timer) ||
- test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags))
+ if (atomic_read(&ha->loop_down_timer) || LOOP_TRANSITION(ha))
break;
if (swl != NULL) {
if (new_fcport->d_id.b24 == ha->d_id.b24)
continue;
+ /* Bypass if same domain and area of adapter. */
+ if (((new_fcport->d_id.b24 & 0xffff00) ==
+ (ha->d_id.b24 & 0xffff00)) && ha->current_topology ==
+ ISP_CFG_FL)
+ continue;
+
/* Bypass reserved domain fields. */
if ((new_fcport->d_id.b.domain & 0xf0) == 0xf0)
continue;
(fcport->flags & FCF_TAPE_PRESENT) == 0 &&
fcport->port_type != FCT_INITIATOR &&
fcport->port_type != FCT_BROADCAST) {
- qla2x00_fabric_logout(ha, fcport->loop_id);
+ ha->isp_ops.fabric_logout(ha, fcport->loop_id,
+ fcport->d_id.b.domain, fcport->d_id.b.area,
+ fcport->d_id.b.al_pa);
fcport->loop_id = FC_NO_LOOP_ID;
}
nxt_d_id.b24 = new_fcport->d_id.b24;
new_fcport = qla2x00_alloc_fcport(ha, GFP_KERNEL);
if (new_fcport == NULL) {
- if (swl)
- kfree(swl);
+ kfree(swl);
return (QLA_MEMORY_ALLOC_FAILED);
}
new_fcport->flags |= (FCF_FABRIC_DEVICE | FCF_LOGIN_NEEDED);
new_fcport->d_id.b24 = nxt_d_id.b24;
}
- if (swl)
- kfree(swl);
-
- if (new_fcport)
- kfree(new_fcport);
+ kfree(swl);
+ kfree(new_fcport);
if (!list_empty(new_fcports))
ha->device_flags |= DFLG_FABRIC_DEVICES;
}
/* Skip reserved loop IDs. */
- while (RESERVED_LOOP_ID(dev->loop_id)) {
+ while (qla2x00_is_reserved_id(ha, dev->loop_id)) {
dev->loop_id++;
}
* Kernel context.
*/
static int
-qla2x00_device_resync(scsi_qla_host_t *ha)
+qla2x00_device_resync(scsi_qla_host_t *ha)
{
int rval;
int rval2;
switch (format) {
case 0:
- if (!IS_QLA2100(ha) && !IS_QLA2200(ha) &&
+ if (ql2xprocessrscn &&
+ !IS_QLA2100(ha) && !IS_QLA2200(ha) &&
!IS_QLA6312(ha) && !IS_QLA6322(ha) &&
+ !IS_QLA24XX(ha) && !IS_QLA54XX(ha) &&
ha->flags.init_done) {
/* Handle port RSCN via asyncronous IOCBs */
rval2 = qla2x00_handle_port_rscn(ha, rscn_entry,
if (atomic_read(&fcport->state) == FCS_ONLINE) {
if (format != 3 ||
fcport->port_type != FCT_INITIATOR) {
- qla2x00_mark_device_lost(ha, fcport, 0);
+ qla2x00_mark_device_lost(ha, fcport,
+ 0, 0);
}
}
fcport->flags &= ~FCF_FARP_DONE;
{
int rval;
int retry;
+ uint8_t opts;
rval = QLA_SUCCESS;
retry = 0;
rval = qla2x00_fabric_login(ha, fcport, next_loopid);
if (rval == QLA_SUCCESS) {
- rval = qla2x00_get_port_database(ha, fcport, 0);
+ /* Send an ADISC to tape devices.*/
+ opts = 0;
+ if (fcport->flags & FCF_TAPE_PRESENT)
+ opts |= BIT_1;
+ rval = qla2x00_get_port_database(ha, fcport, opts);
if (rval != QLA_SUCCESS) {
- qla2x00_fabric_logout(ha, fcport->loop_id);
+ ha->isp_ops.fabric_logout(ha, fcport->loop_id,
+ fcport->d_id.b.domain, fcport->d_id.b.area,
+ fcport->d_id.b.al_pa);
+ qla2x00_mark_device_lost(ha, fcport, 1, 0);
} else {
qla2x00_update_fcport(ha, fcport);
}
fcport->d_id.b.area, fcport->d_id.b.al_pa));
/* Login fcport on switch. */
- qla2x00_login_fabric(ha, fcport->loop_id,
+ ha->isp_ops.fabric_login(ha, fcport->loop_id,
fcport->d_id.b.domain, fcport->d_id.b.area,
fcport->d_id.b.al_pa, mb, BIT_0);
if (mb[0] == MBS_PORT_ID_USED) {
/*
* Device has another loop ID. The firmware team
- * recommends us to perform an implicit login with the
- * specified ID again. The ID we just used is save here
- * so we return with an ID that can be tried by the
- * next login.
+ * recommends the driver perform an implicit login with
+ * the specified ID again. The ID we just used is save
+ * here so we return with an ID that can be tried by
+ * the next login.
*/
retry++;
tmp_loopid = fcport->loop_id;
}
}
+ if (mb[10] & BIT_0)
+ fcport->supported_classes |= FC_COS_CLASS2;
+ if (mb[10] & BIT_1)
+ fcport->supported_classes |= FC_COS_CLASS3;
+
rval = QLA_SUCCESS;
break;
} else if (mb[0] == MBS_LOOP_ID_USED) {
* dead.
*/
*next_loopid = fcport->loop_id;
- qla2x00_fabric_logout(ha, fcport->loop_id);
- qla2x00_mark_device_lost(ha, fcport, 1);
+ ha->isp_ops.fabric_logout(ha, fcport->loop_id,
+ fcport->d_id.b.domain, fcport->d_id.b.area,
+ fcport->d_id.b.al_pa);
+ qla2x00_mark_device_lost(ha, fcport, 1, 0);
rval = 1;
break;
* unrecoverable / not handled error
*/
DEBUG2(printk("%s(%ld): failed=%x port_id=%02x%02x%02x "
- "loop_id=%x jiffies=%lx.\n",
- __func__, ha->host_no, mb[0],
+ "loop_id=%x jiffies=%lx.\n",
+ __func__, ha->host_no, mb[0],
fcport->d_id.b.domain, fcport->d_id.b.area,
fcport->d_id.b.al_pa, fcport->loop_id, jiffies));
*next_loopid = fcport->loop_id;
- qla2x00_fabric_logout(ha, fcport->loop_id);
+ ha->isp_ops.fabric_logout(ha, fcport->loop_id,
+ fcport->d_id.b.domain, fcport->d_id.b.area,
+ fcport->d_id.b.al_pa);
fcport->loop_id = FC_NO_LOOP_ID;
- atomic_set(&fcport->state, FCS_DEVICE_DEAD);
+ fcport->login_retry = 0;
rval = 3;
break;
* 3 - Fatal error
*/
int
-qla2x00_local_device_login(scsi_qla_host_t *ha, uint16_t loop_id)
+qla2x00_local_device_login(scsi_qla_host_t *ha, fc_port_t *fcport)
{
int rval;
uint16_t mb[MAILBOX_REGISTER_COUNT];
memset(mb, 0, sizeof(mb));
- rval = qla2x00_login_local_device(ha, loop_id, mb, BIT_0);
+ rval = qla2x00_login_local_device(ha, fcport, mb, BIT_0);
if (rval == QLA_SUCCESS) {
/* Interrogate mailbox registers for any errors */
if (mb[0] == MBS_COMMAND_ERROR)
* 0 = success
*/
int
-qla2x00_loop_resync(scsi_qla_host_t *ha)
+qla2x00_loop_resync(scsi_qla_host_t *ha)
{
int rval;
uint32_t wait_time;
rval = QLA_SUCCESS;
atomic_set(&ha->loop_state, LOOP_UPDATE);
- qla2x00_stats.loop_resync++;
clear_bit(ISP_ABORT_RETRY, &ha->dpc_flags);
if (ha->flags.online) {
if (!(rval = qla2x00_fw_ready(ha))) {
/* Wait at most MAX_TARGET RSCNs for a stable link. */
wait_time = 256;
do {
- /* v2.19.05b6 */
atomic_set(&ha->loop_state, LOOP_UPDATE);
- /*
- * Issue marker command only when we are going
- * to start the I/O .
- */
- ha->marker_needed = 1;
+ /* Issue a marker after FW becomes ready. */
+ qla2x00_marker(ha, 0, 0, MK_SYNC_ALL);
+ ha->marker_needed = 0;
/* Remap devices on Loop. */
clear_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
rescan_done = 1;
}
- qla2x00_probe_for_all_luns(ha);
+ qla2x00_probe_for_all_luns(ha);
+}
+
+void
+qla2x00_update_fcports(scsi_qla_host_t *ha)
+{
+ fc_port_t *fcport;
+
+ /* Go with deferred removal of rport references. */
+ list_for_each_entry(fcport, &ha->fcports, list)
+ if (fcport->drport)
+ qla2x00_rport_del(fcport);
}
/*
if (ha->flags.online) {
ha->flags.online = 0;
clear_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
- qla2x00_stats.ispAbort++;
- ha->total_isp_aborts++; /* used by ioctl */
- ha->sns_retry_cnt = 0;
qla_printk(KERN_INFO, ha,
"Performing ISP error recovery - ha= %p.\n", ha);
- qla2x00_reset_chip(ha);
+ ha->isp_ops.reset_chip(ha);
atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
if (atomic_read(&ha->loop_state) != LOOP_DOWN) {
atomic_set(&ha->loop_state, LOOP_DOWN);
- qla2x00_mark_all_devices_lost(ha);
+ qla2x00_mark_all_devices_lost(ha, 0);
} else {
if (!atomic_read(&ha->loop_down_timer))
atomic_set(&ha->loop_down_timer,
sp = ha->outstanding_cmds[cnt];
if (sp) {
ha->outstanding_cmds[cnt] = NULL;
- if (ha->actthreads)
- ha->actthreads--;
sp->flags = 0;
sp->cmd->result = DID_RESET << 16;
sp->cmd->host_scribble = (unsigned char *)NULL;
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
- qla2x00_nvram_config(ha);
+ ha->isp_ops.nvram_config(ha);
if (!qla2x00_restart_isp(ha)) {
clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
ha->flags.online = 1;
- /* Enable ISP interrupts. */
- qla2x00_enable_intrs(ha);
+ ha->isp_ops.enable_intrs(ha);
- ha->isp_abort_cnt = 0;
+ ha->isp_abort_cnt = 0;
clear_bit(ISP_ABORT_RETRY, &ha->dpc_flags);
} else { /* failed the ISP abort */
ha->flags.online = 1;
qla_printk(KERN_WARNING, ha,
"ISP error recovery failed - "
"board disabled\n");
- /*
+ /*
* The next call disables the board
* completely.
*/
- qla2x00_reset_adapter(ha);
+ ha->isp_ops.reset_adapter(ha);
ha->flags.online = 0;
clear_bit(ISP_ABORT_RETRY,
&ha->dpc_flags);
} else { /* schedule another ISP abort */
ha->isp_abort_cnt--;
DEBUG(printk("qla%ld: ISP abort - "
- "retry remainning %d\n",
+ "retry remaining %d\n",
ha->host_no, ha->isp_abort_cnt);)
status = 1;
}
status = 1;
}
}
-
+
}
if (status) {
qla2x00_restart_isp(scsi_qla_host_t *ha)
{
uint8_t status = 0;
- device_reg_t __iomem *reg = ha->iobase;
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
unsigned long flags = 0;
uint32_t wait_time;
/* If firmware needs to be loaded */
if (qla2x00_isp_firmware(ha)) {
ha->flags.online = 0;
- if (!(status = qla2x00_chip_diag(ha))) {
+ if (!(status = ha->isp_ops.chip_diag(ha))) {
if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
status = qla2x00_setup_chip(ha);
goto done;
}
- reg = ha->iobase;
-
spin_lock_irqsave(&ha->hardware_lock, flags);
- /* Disable SRAM, Instruction RAM and GP RAM parity. */
- WRT_REG_WORD(®->hccr, (HCCR_ENABLE_PARITY + 0x0));
- RD_REG_WORD(®->hccr); /* PCI Posting. */
+ if (!IS_QLA24XX(ha) && !IS_QLA54XX(ha)) {
+ /*
+ * Disable SRAM, Instruction RAM and GP RAM
+ * parity.
+ */
+ WRT_REG_WORD(®->hccr,
+ (HCCR_ENABLE_PARITY + 0x0));
+ RD_REG_WORD(®->hccr);
+ }
spin_unlock_irqrestore(&ha->hardware_lock, flags);
-
+
status = qla2x00_setup_chip(ha);
spin_lock_irqsave(&ha->hardware_lock, flags);
-
- /* Enable proper parity */
- if (IS_QLA2300(ha))
- /* SRAM parity */
- WRT_REG_WORD(®->hccr,
- (HCCR_ENABLE_PARITY + 0x1));
- else
- /* SRAM, Instruction RAM and GP RAM parity */
- WRT_REG_WORD(®->hccr,
- (HCCR_ENABLE_PARITY + 0x7));
- RD_REG_WORD(®->hccr); /* PCI Posting. */
+
+ if (!IS_QLA24XX(ha) && !IS_QLA54XX(ha)) {
+ /* Enable proper parity */
+ if (IS_QLA2300(ha))
+ /* SRAM parity */
+ WRT_REG_WORD(®->hccr,
+ (HCCR_ENABLE_PARITY + 0x1));
+ else
+ /*
+ * SRAM, Instruction RAM and GP RAM
+ * parity.
+ */
+ WRT_REG_WORD(®->hccr,
+ (HCCR_ENABLE_PARITY + 0x7));
+ RD_REG_WORD(®->hccr);
+ }
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
if (!(status = qla2x00_fw_ready(ha))) {
DEBUG(printk("%s(): Start configure loop, "
- "status = %d\n",
- __func__,
- status);)
+ "status = %d\n", __func__, status);)
+
+ /* Issue a marker after FW becomes ready. */
+ qla2x00_marker(ha, 0, 0, MK_SYNC_ALL);
+
ha->flags.online = 1;
/* Wait at most MAX_TARGET RSCNs for a stable link. */
wait_time = 256;
}
/* if no cable then assume it's good */
- if ((ha->device_flags & DFLG_NO_CABLE))
+ if ((ha->device_flags & DFLG_NO_CABLE))
status = 0;
DEBUG(printk("%s(): Configure loop done, status = 0x%x\n",
* Input:
* ha = adapter block pointer.
*/
-static void
+void
qla2x00_reset_adapter(scsi_qla_host_t *ha)
{
unsigned long flags = 0;
- device_reg_t __iomem *reg = ha->iobase;
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
ha->flags.online = 0;
- qla2x00_disable_intrs(ha);
+ ha->isp_ops.disable_intrs(ha);
- /* Reset RISC processor. */
spin_lock_irqsave(&ha->hardware_lock, flags);
WRT_REG_WORD(®->hccr, HCCR_RESET_RISC);
RD_REG_WORD(®->hccr); /* PCI Posting. */
RD_REG_WORD(®->hccr); /* PCI Posting. */
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
+
+void
+qla24xx_reset_adapter(scsi_qla_host_t *ha)
+{
+ unsigned long flags = 0;
+ struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
+
+ ha->flags.online = 0;
+ ha->isp_ops.disable_intrs(ha);
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ WRT_REG_DWORD(®->hccr, HCCRX_SET_RISC_RESET);
+ RD_REG_DWORD(®->hccr);
+ WRT_REG_DWORD(®->hccr, HCCRX_REL_RISC_PAUSE);
+ RD_REG_DWORD(®->hccr);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+}
+
+int
+qla24xx_nvram_config(scsi_qla_host_t *ha)
+{
+ int rval;
+ struct init_cb_24xx *icb;
+ struct nvram_24xx *nv;
+ uint32_t *dptr;
+ uint8_t *dptr1, *dptr2;
+ uint32_t chksum;
+ uint16_t cnt;
+
+ rval = QLA_SUCCESS;
+ icb = (struct init_cb_24xx *)ha->init_cb;
+ nv = (struct nvram_24xx *)ha->request_ring;
+
+ /* Determine NVRAM starting address. */
+ ha->nvram_size = sizeof(struct nvram_24xx);
+ ha->nvram_base = FA_NVRAM_FUNC0_ADDR;
+ ha->vpd_size = FA_NVRAM_VPD_SIZE;
+ ha->vpd_base = FA_NVRAM_VPD0_ADDR;
+ if (PCI_FUNC(ha->pdev->devfn)) {
+ ha->nvram_base = FA_NVRAM_FUNC1_ADDR;
+ ha->vpd_base = FA_NVRAM_VPD1_ADDR;
+ }
+
+ /* Get NVRAM data and calculate checksum. */
+ dptr = (uint32_t *)nv;
+ ha->isp_ops.read_nvram(ha, (uint8_t *)dptr, ha->nvram_base,
+ ha->nvram_size);
+ for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++)
+ chksum += le32_to_cpu(*dptr++);
+
+ DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no));
+ DEBUG5(qla2x00_dump_buffer((uint8_t *)ha->request_ring,
+ ha->nvram_size));
+
+ /* Bad NVRAM data, set defaults parameters. */
+ if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' || nv->id[2] != 'P'
+ || nv->id[3] != ' ' ||
+ nv->nvram_version < __constant_cpu_to_le16(ICB_VERSION)) {
+ /* Reset NVRAM data. */
+ qla_printk(KERN_WARNING, ha, "Inconsistent NVRAM detected: "
+ "checksum=0x%x id=%c version=0x%x.\n", chksum, nv->id[0],
+ le16_to_cpu(nv->nvram_version));
+ qla_printk(KERN_WARNING, ha, "Falling back to functioning (yet "
+ "invalid -- WWPN) defaults.\n");
+
+ /*
+ * Set default initialization control block.
+ */
+ memset(nv, 0, ha->nvram_size);
+ nv->nvram_version = __constant_cpu_to_le16(ICB_VERSION);
+ nv->version = __constant_cpu_to_le16(ICB_VERSION);
+ nv->frame_payload_size = __constant_cpu_to_le16(2048);
+ nv->execution_throttle = __constant_cpu_to_le16(0xFFFF);
+ nv->exchange_count = __constant_cpu_to_le16(0);
+ nv->hard_address = __constant_cpu_to_le16(124);
+ nv->port_name[0] = 0x21;
+ nv->port_name[1] = 0x00 + PCI_FUNC(ha->pdev->devfn);
+ nv->port_name[2] = 0x00;
+ nv->port_name[3] = 0xe0;
+ nv->port_name[4] = 0x8b;
+ nv->port_name[5] = 0x1c;
+ nv->port_name[6] = 0x55;
+ nv->port_name[7] = 0x86;
+ nv->node_name[0] = 0x20;
+ nv->node_name[1] = 0x00;
+ nv->node_name[2] = 0x00;
+ nv->node_name[3] = 0xe0;
+ nv->node_name[4] = 0x8b;
+ nv->node_name[5] = 0x1c;
+ nv->node_name[6] = 0x55;
+ nv->node_name[7] = 0x86;
+ nv->login_retry_count = __constant_cpu_to_le16(8);
+ nv->link_down_timeout = __constant_cpu_to_le16(200);
+ nv->interrupt_delay_timer = __constant_cpu_to_le16(0);
+ nv->login_timeout = __constant_cpu_to_le16(0);
+ nv->firmware_options_1 =
+ __constant_cpu_to_le32(BIT_14|BIT_13|BIT_2|BIT_1);
+ nv->firmware_options_2 = __constant_cpu_to_le32(2 << 4);
+ nv->firmware_options_2 |= __constant_cpu_to_le32(BIT_12);
+ nv->firmware_options_3 = __constant_cpu_to_le32(2 << 13);
+ nv->host_p = __constant_cpu_to_le32(BIT_11|BIT_10);
+ nv->efi_parameters = __constant_cpu_to_le32(0);
+ nv->reset_delay = 5;
+ nv->max_luns_per_target = __constant_cpu_to_le16(128);
+ nv->port_down_retry_count = __constant_cpu_to_le16(30);
+ nv->link_down_timeout = __constant_cpu_to_le16(30);
+
+ rval = 1;
+ }
+
+ /* Reset Initialization control block */
+ memset(icb, 0, sizeof(struct init_cb_24xx));
+
+ /* Copy 1st segment. */
+ dptr1 = (uint8_t *)icb;
+ dptr2 = (uint8_t *)&nv->version;
+ cnt = (uint8_t *)&icb->response_q_inpointer - (uint8_t *)&icb->version;
+ while (cnt--)
+ *dptr1++ = *dptr2++;
+
+ icb->login_retry_count = nv->login_retry_count;
+ icb->link_down_timeout = nv->link_down_timeout;
+
+ /* Copy 2nd segment. */
+ dptr1 = (uint8_t *)&icb->interrupt_delay_timer;
+ dptr2 = (uint8_t *)&nv->interrupt_delay_timer;
+ cnt = (uint8_t *)&icb->reserved_3 -
+ (uint8_t *)&icb->interrupt_delay_timer;
+ while (cnt--)
+ *dptr1++ = *dptr2++;
+
+ /*
+ * Setup driver NVRAM options.
+ */
+ if (memcmp(nv->model_name, BINZERO, sizeof(nv->model_name)) != 0) {
+ char *st, *en;
+ uint16_t index;
+
+ strncpy(ha->model_number, nv->model_name,
+ sizeof(nv->model_name));
+ st = en = ha->model_number;
+ en += sizeof(nv->model_name) - 1;
+ while (en > st) {
+ if (*en != 0x20 && *en != 0x00)
+ break;
+ *en-- = '\0';
+ }
+
+ index = (ha->pdev->subsystem_device & 0xff);
+ if (index < QLA_MODEL_NAMES)
+ ha->model_desc = qla2x00_model_name[index * 2 + 1];
+ } else
+ strcpy(ha->model_number, "QLA2462");
+
+ /* Prepare nodename */
+ if ((icb->firmware_options_1 & BIT_14) == 0) {
+ /*
+ * Firmware will apply the following mask if the nodename was
+ * not provided.
+ */
+ memcpy(icb->node_name, icb->port_name, WWN_SIZE);
+ icb->node_name[0] &= 0xF0;
+ }
+
+ /* Set host adapter parameters. */
+ ha->flags.disable_risc_code_load = 0;
+ ha->flags.enable_lip_reset = 1;
+ ha->flags.enable_lip_full_login = 1;
+ ha->flags.enable_target_reset = 1;
+ ha->flags.enable_led_scheme = 0;
+
+ ha->operating_mode =
+ (icb->firmware_options_2 & (BIT_6 | BIT_5 | BIT_4)) >> 4;
+
+ memcpy(ha->fw_seriallink_options24, nv->seriallink_options,
+ sizeof(ha->fw_seriallink_options24));
+
+ /* save HBA serial number */
+ ha->serial0 = icb->port_name[5];
+ ha->serial1 = icb->port_name[6];
+ ha->serial2 = icb->port_name[7];
+ ha->node_name = icb->node_name;
+ ha->port_name = icb->port_name;
+
+ icb->execution_throttle = __constant_cpu_to_le16(0xFFFF);
+
+ ha->retry_count = le16_to_cpu(nv->login_retry_count);
+
+ /* Set minimum login_timeout to 4 seconds. */
+ if (le16_to_cpu(nv->login_timeout) < ql2xlogintimeout)
+ nv->login_timeout = cpu_to_le16(ql2xlogintimeout);
+ if (le16_to_cpu(nv->login_timeout) < 4)
+ nv->login_timeout = __constant_cpu_to_le16(4);
+ ha->login_timeout = le16_to_cpu(nv->login_timeout);
+ icb->login_timeout = cpu_to_le16(nv->login_timeout);
+
+ /* Set minimum RATOV to 200 tenths of a second. */
+ ha->r_a_tov = 200;
+
+ ha->loop_reset_delay = nv->reset_delay;
+
+ /* Link Down Timeout = 0:
+ *
+ * When Port Down timer expires we will start returning
+ * I/O's to OS with "DID_NO_CONNECT".
+ *
+ * Link Down Timeout != 0:
+ *
+ * The driver waits for the link to come up after link down
+ * before returning I/Os to OS with "DID_NO_CONNECT".
+ */
+ if (le16_to_cpu(nv->link_down_timeout) == 0) {
+ ha->loop_down_abort_time =
+ (LOOP_DOWN_TIME - LOOP_DOWN_TIMEOUT);
+ } else {
+ ha->link_down_timeout = le16_to_cpu(nv->link_down_timeout);
+ ha->loop_down_abort_time =
+ (LOOP_DOWN_TIME - ha->link_down_timeout);
+ }
+
+ /* Need enough time to try and get the port back. */
+ ha->port_down_retry_count = le16_to_cpu(nv->port_down_retry_count);
+ if (qlport_down_retry)
+ ha->port_down_retry_count = qlport_down_retry;
+
+ /* Set login_retry_count */
+ ha->login_retry_count = le16_to_cpu(nv->login_retry_count);
+ if (ha->port_down_retry_count ==
+ le16_to_cpu(nv->port_down_retry_count) &&
+ ha->port_down_retry_count > 3)
+ ha->login_retry_count = ha->port_down_retry_count;
+ else if (ha->port_down_retry_count > (int)ha->login_retry_count)
+ ha->login_retry_count = ha->port_down_retry_count;
+ if (ql2xloginretrycount)
+ ha->login_retry_count = ql2xloginretrycount;
+
+ /* Enable ZIO. */
+ if (!ha->flags.init_done) {
+ ha->zio_mode = le32_to_cpu(icb->firmware_options_2) &
+ (BIT_3 | BIT_2 | BIT_1 | BIT_0);
+ ha->zio_timer = le16_to_cpu(icb->interrupt_delay_timer) ?
+ le16_to_cpu(icb->interrupt_delay_timer): 2;
+ }
+ icb->firmware_options_2 &= __constant_cpu_to_le32(
+ ~(BIT_3 | BIT_2 | BIT_1 | BIT_0));
+ ha->flags.process_response_queue = 0;
+ if (ha->zio_mode != QLA_ZIO_DISABLED) {
+ ha->zio_mode = QLA_ZIO_MODE_6;
+
+ DEBUG2(printk("scsi(%ld): ZIO mode %d enabled; timer delay "
+ "(%d us).\n", ha->host_no, ha->zio_mode,
+ ha->zio_timer * 100));
+ qla_printk(KERN_INFO, ha,
+ "ZIO mode %d enabled; timer delay (%d us).\n",
+ ha->zio_mode, ha->zio_timer * 100);
+
+ icb->firmware_options_2 |= cpu_to_le32(
+ (uint32_t)ha->zio_mode);
+ icb->interrupt_delay_timer = cpu_to_le16(ha->zio_timer);
+ ha->flags.process_response_queue = 1;
+ }
+
+ if (rval) {
+ DEBUG2_3(printk(KERN_WARNING
+ "scsi(%ld): NVRAM configuration failed!\n", ha->host_no));
+ }
+ return (rval);
+}
+
+#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
+
+int
+qla2x00_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr)
+{
+ int rval, num, i;
+ uint32_t cnt;
+ uint16_t *risc_code;
+ uint32_t risc_addr, risc_size;
+ uint16_t *req_ring;
+ struct qla_fw_info *fw_iter;
+
+ rval = QLA_SUCCESS;
+
+ /* Load firmware sequences */
+ fw_iter = ha->brd_info->fw_info;
+ *srisc_addr = *ha->brd_info->fw_info->fwstart;
+ while (fw_iter->addressing != FW_INFO_ADDR_NOMORE) {
+ risc_code = fw_iter->fwcode;
+ risc_size = *fw_iter->fwlen;
+ if (fw_iter->addressing == FW_INFO_ADDR_NORMAL)
+ risc_addr = *fw_iter->fwstart;
+ else
+ risc_addr = *fw_iter->lfwstart;
+
+ num = 0;
+ rval = 0;
+ while (risc_size > 0 && !rval) {
+ cnt = (uint16_t)(ha->fw_transfer_size >> 1);
+ if (cnt > risc_size)
+ cnt = risc_size;
+
+ DEBUG7(printk("scsi(%ld): Loading risc segment@ "
+ "addr %p, number of bytes 0x%x, offset 0x%lx.\n",
+ ha->host_no, risc_code, cnt, risc_addr));
+
+ req_ring = (uint16_t *)ha->request_ring;
+ for (i = 0; i < cnt; i++)
+ req_ring[i] = cpu_to_le16(risc_code[i]);
+
+ rval = qla2x00_load_ram(ha, ha->request_dma, risc_addr,
+ cnt);
+ if (rval) {
+ DEBUG(printk("scsi(%ld): [ERROR] Failed to "
+ "load segment %d of firmware\n",
+ ha->host_no, num));
+ qla_printk(KERN_WARNING, ha,
+ "[ERROR] Failed to load segment %d of "
+ "firmware\n", num);
+
+ qla2x00_dump_regs(ha);
+ break;
+ }
+
+ risc_code += cnt;
+ risc_addr += cnt;
+ risc_size -= cnt;
+ num++;
+ }
+
+ /* Next firmware sequence */
+ fw_iter++;
+ }
+ return rval;
+}
+
+int
+qla24xx_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr)
+{
+ int rval, num, i;
+ uint32_t cnt;
+ uint32_t *risc_code;
+ uint32_t risc_addr, risc_size;
+ uint32_t *req_ring;
+ struct qla_fw_info *fw_iter;
+
+ rval = QLA_SUCCESS;
+
+ /* Load firmware sequences */
+ fw_iter = ha->brd_info->fw_info;
+ *srisc_addr = *((uint32_t *)fw_iter->lfwstart);
+ while (fw_iter->addressing != FW_INFO_ADDR_NOMORE) {
+ risc_code = (uint32_t *)fw_iter->fwcode;
+ risc_size = *((uint32_t *)fw_iter->fwlen);
+ risc_addr = *((uint32_t *)fw_iter->lfwstart);
+
+ num = 0;
+ rval = 0;
+ while (risc_size > 0 && !rval) {
+ cnt = (uint32_t)(ha->fw_transfer_size >> 2);
+ if (cnt > risc_size)
+ cnt = risc_size;
+
+ DEBUG7(printk("scsi(%ld): Loading risc segment@ "
+ "addr %p, number of bytes 0x%x, offset 0x%lx.\n",
+ ha->host_no, risc_code, cnt, risc_addr));
+
+ req_ring = (uint32_t *)ha->request_ring;
+ for (i = 0; i < cnt; i++)
+ req_ring[i] = cpu_to_le32(risc_code[i]);
+
+ rval = qla2x00_load_ram(ha, ha->request_dma, risc_addr,
+ cnt);
+ if (rval) {
+ DEBUG(printk("scsi(%ld): [ERROR] Failed to "
+ "load segment %d of firmware\n",
+ ha->host_no, num));
+ qla_printk(KERN_WARNING, ha,
+ "[ERROR] Failed to load segment %d of "
+ "firmware\n", num);
+
+ qla2x00_dump_regs(ha);
+ break;
+ }
+
+ risc_code += cnt;
+ risc_addr += cnt;
+ risc_size -= cnt;
+ num++;
+ }
+
+ /* Next firmware sequence */
+ fw_iter++;
+ }
+ return rval;
+}
+
+int
+qla24xx_load_risc_flash(scsi_qla_host_t *ha, uint32_t *srisc_addr)
+{
+ int rval;
+ int segments, fragment;
+ uint32_t faddr;
+ uint32_t *dcode, dlen;
+ uint32_t risc_addr;
+ uint32_t risc_size;
+ uint32_t i;
+
+ rval = QLA_SUCCESS;
+
+ segments = FA_RISC_CODE_SEGMENTS;
+ faddr = FA_RISC_CODE_ADDR;
+ dcode = (uint32_t *)ha->request_ring;
+ *srisc_addr = 0;
+
+ /* Validate firmware image by checking version. */
+ qla24xx_read_flash_data(ha, dcode, faddr + 4, 4);
+ for (i = 0; i < 4; i++)
+ dcode[i] = be32_to_cpu(dcode[i]);
+ if ((dcode[0] == 0xffffffff && dcode[1] == 0xffffffff &&
+ dcode[2] == 0xffffffff && dcode[3] == 0xffffffff) ||
+ (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
+ dcode[3] == 0)) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to verify integrity of flash firmware image!\n");
+ qla_printk(KERN_WARNING, ha,
+ "Firmware data: %08x %08x %08x %08x!\n", dcode[0],
+ dcode[1], dcode[2], dcode[3]);
+
+ return QLA_FUNCTION_FAILED;
+ }
+
+ while (segments && rval == QLA_SUCCESS) {
+ /* Read segment's load information. */
+ qla24xx_read_flash_data(ha, dcode, faddr, 4);
+
+ risc_addr = be32_to_cpu(dcode[2]);
+ *srisc_addr = *srisc_addr == 0 ? risc_addr : *srisc_addr;
+ risc_size = be32_to_cpu(dcode[3]);
+
+ fragment = 0;
+ while (risc_size > 0 && rval == QLA_SUCCESS) {
+ dlen = (uint32_t)(ha->fw_transfer_size >> 2);
+ if (dlen > risc_size)
+ dlen = risc_size;
+
+ DEBUG7(printk("scsi(%ld): Loading risc segment@ risc "
+ "addr %x, number of dwords 0x%x, offset 0x%x.\n",
+ ha->host_no, risc_addr, dlen, faddr));
+
+ qla24xx_read_flash_data(ha, dcode, faddr, dlen);
+ for (i = 0; i < dlen; i++)
+ dcode[i] = swab32(dcode[i]);
+
+ rval = qla2x00_load_ram(ha, ha->request_dma, risc_addr,
+ dlen);
+ if (rval) {
+ DEBUG(printk("scsi(%ld):[ERROR] Failed to load "
+ "segment %d of firmware\n", ha->host_no,
+ fragment));
+ qla_printk(KERN_WARNING, ha,
+ "[ERROR] Failed to load segment %d of "
+ "firmware\n", fragment);
+ break;
+ }
+
+ faddr += dlen;
+ risc_addr += dlen;
+ risc_size -= dlen;
+ fragment++;
+ }
+
+ /* Next segment. */
+ segments--;
+ }
+
+ return rval;
+}
+
+#else /* !defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) */
+
+int
+qla2x00_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr)
+{
+ int rval;
+ int i, fragment;
+ uint16_t *wcode, *fwcode;
+ uint32_t risc_addr, risc_size, fwclen, wlen, *seg;
+ struct fw_blob *blob;
+
+ /* Load firmware blob. */
+ blob = qla2x00_request_firmware(ha);
+ if (!blob) {
+ qla_printk(KERN_ERR, ha, "Firmware image unavailable.\n");
+ return QLA_FUNCTION_FAILED;
+ }
+
+ rval = QLA_SUCCESS;
+
+ wcode = (uint16_t *)ha->request_ring;
+ *srisc_addr = 0;
+ fwcode = (uint16_t *)blob->fw->data;
+ fwclen = 0;
+
+ /* Validate firmware image by checking version. */
+ if (blob->fw->size < 8 * sizeof(uint16_t)) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to verify integrity of firmware image (%Zd)!\n",
+ blob->fw->size);
+ goto fail_fw_integrity;
+ }
+ for (i = 0; i < 4; i++)
+ wcode[i] = be16_to_cpu(fwcode[i + 4]);
+ if ((wcode[0] == 0xffff && wcode[1] == 0xffff && wcode[2] == 0xffff &&
+ wcode[3] == 0xffff) || (wcode[0] == 0 && wcode[1] == 0 &&
+ wcode[2] == 0 && wcode[3] == 0)) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to verify integrity of firmware image!\n");
+ qla_printk(KERN_WARNING, ha,
+ "Firmware data: %04x %04x %04x %04x!\n", wcode[0],
+ wcode[1], wcode[2], wcode[3]);
+ goto fail_fw_integrity;
+ }
+
+ seg = blob->segs;
+ while (*seg && rval == QLA_SUCCESS) {
+ risc_addr = *seg;
+ *srisc_addr = *srisc_addr == 0 ? *seg : *srisc_addr;
+ risc_size = be16_to_cpu(fwcode[3]);
+
+ /* Validate firmware image size. */
+ fwclen += risc_size * sizeof(uint16_t);
+ if (blob->fw->size < fwclen) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to verify integrity of firmware image "
+ "(%Zd)!\n", blob->fw->size);
+ goto fail_fw_integrity;
+ }
+
+ fragment = 0;
+ while (risc_size > 0 && rval == QLA_SUCCESS) {
+ wlen = (uint16_t)(ha->fw_transfer_size >> 1);
+ if (wlen > risc_size)
+ wlen = risc_size;
+
+ DEBUG7(printk("scsi(%ld): Loading risc segment@ risc "
+ "addr %x, number of words 0x%x.\n", ha->host_no,
+ risc_addr, wlen));
+
+ for (i = 0; i < wlen; i++)
+ wcode[i] = swab16(fwcode[i]);
+
+ rval = qla2x00_load_ram(ha, ha->request_dma, risc_addr,
+ wlen);
+ if (rval) {
+ DEBUG(printk("scsi(%ld):[ERROR] Failed to load "
+ "segment %d of firmware\n", ha->host_no,
+ fragment));
+ qla_printk(KERN_WARNING, ha,
+ "[ERROR] Failed to load segment %d of "
+ "firmware\n", fragment);
+ break;
+ }
+
+ fwcode += wlen;
+ risc_addr += wlen;
+ risc_size -= wlen;
+ fragment++;
+ }
+
+ /* Next segment. */
+ seg++;
+ }
+ return rval;
+
+fail_fw_integrity:
+ return QLA_FUNCTION_FAILED;
+}
+
+int
+qla24xx_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr)
+{
+ int rval;
+ int segments, fragment;
+ uint32_t *dcode, dlen;
+ uint32_t risc_addr;
+ uint32_t risc_size;
+ uint32_t i;
+ struct fw_blob *blob;
+ uint32_t *fwcode, fwclen;
+
+ /* Load firmware blob. */
+ blob = qla2x00_request_firmware(ha);
+ if (!blob) {
+ qla_printk(KERN_ERR, ha, "Firmware image unavailable.\n");
+ return QLA_FUNCTION_FAILED;
+ }
+
+ rval = QLA_SUCCESS;
+
+ segments = FA_RISC_CODE_SEGMENTS;
+ dcode = (uint32_t *)ha->request_ring;
+ *srisc_addr = 0;
+ fwcode = (uint32_t *)blob->fw->data;
+ fwclen = 0;
+
+ /* Validate firmware image by checking version. */
+ if (blob->fw->size < 8 * sizeof(uint32_t)) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to verify integrity of firmware image (%Zd)!\n",
+ blob->fw->size);
+ goto fail_fw_integrity;
+ }
+ for (i = 0; i < 4; i++)
+ dcode[i] = be32_to_cpu(fwcode[i + 4]);
+ if ((dcode[0] == 0xffffffff && dcode[1] == 0xffffffff &&
+ dcode[2] == 0xffffffff && dcode[3] == 0xffffffff) ||
+ (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
+ dcode[3] == 0)) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to verify integrity of firmware image!\n");
+ qla_printk(KERN_WARNING, ha,
+ "Firmware data: %08x %08x %08x %08x!\n", dcode[0],
+ dcode[1], dcode[2], dcode[3]);
+ goto fail_fw_integrity;
+ }
+
+ while (segments && rval == QLA_SUCCESS) {
+ risc_addr = be32_to_cpu(fwcode[2]);
+ *srisc_addr = *srisc_addr == 0 ? risc_addr : *srisc_addr;
+ risc_size = be32_to_cpu(fwcode[3]);
+
+ /* Validate firmware image size. */
+ fwclen += risc_size * sizeof(uint32_t);
+ if (blob->fw->size < fwclen) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to verify integrity of firmware image "
+ "(%Zd)!\n", blob->fw->size);
+
+ goto fail_fw_integrity;
+ }
+
+ fragment = 0;
+ while (risc_size > 0 && rval == QLA_SUCCESS) {
+ dlen = (uint32_t)(ha->fw_transfer_size >> 2);
+ if (dlen > risc_size)
+ dlen = risc_size;
+
+ DEBUG7(printk("scsi(%ld): Loading risc segment@ risc "
+ "addr %x, number of dwords 0x%x.\n", ha->host_no,
+ risc_addr, dlen));
+
+ for (i = 0; i < dlen; i++)
+ dcode[i] = swab32(fwcode[i]);
+
+ rval = qla2x00_load_ram(ha, ha->request_dma, risc_addr,
+ dlen);
+ if (rval) {
+ DEBUG(printk("scsi(%ld):[ERROR] Failed to load "
+ "segment %d of firmware\n", ha->host_no,
+ fragment));
+ qla_printk(KERN_WARNING, ha,
+ "[ERROR] Failed to load segment %d of "
+ "firmware\n", fragment);
+ break;
+ }
+
+ fwcode += dlen;
+ risc_addr += dlen;
+ risc_size -= dlen;
+ fragment++;
+ }
+
+ /* Next segment. */
+ segments--;
+ }
+ return rval;
+
+fail_fw_integrity:
+ return QLA_FUNCTION_FAILED;
+}
+#endif
git://git.onelab.eu / linux-2.6.git / blobdiff