static int qla2x00_check_sense(struct scsi_cmnd *cp, os_lun_t *);
/**
- * qla2x00_intr_handler() - Process interrupts for the ISP.
+ * qla2100_intr_handler() - Process interrupts for the ISP2100 and ISP2200.
* @irq:
* @dev_id: SCSI driver HA context
* @regs:
* Returns handled flag.
*/
irqreturn_t
-qla2x00_intr_handler(int irq, void *dev_id, struct pt_regs *regs)
+qla2100_intr_handler(int irq, void *dev_id, struct pt_regs *regs)
{
scsi_qla_host_t *ha;
- device_reg_t *reg;
+ device_reg_t __iomem *reg;
+ int status;
+ unsigned long flags;
+ unsigned long iter;
uint32_t mbx;
- int status = 0;
- unsigned long flags = 0;
- unsigned long mbx_flags = 0;
- unsigned long intr_iter;
- uint32_t stat;
- uint16_t hccr;
-
- /* Don't loop forever, interrupt are OFF */
- intr_iter = 50;
ha = (scsi_qla_host_t *) dev_id;
if (!ha) {
}
reg = ha->iobase;
+ status = 0;
spin_lock_irqsave(&ha->hardware_lock, flags);
-
- for (;;) {
- /* Relax CPU! */
- if (!(intr_iter--))
+ for (iter = 50; iter--; ) {
+ if ((RD_REG_WORD(®->istatus) & ISR_RISC_INT) == 0)
break;
- if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
- if ((RD_REG_WORD(®->istatus) & ISR_RISC_INT) == 0)
- break;
-
- if (RD_REG_WORD(®->semaphore) & BIT_0) {
- WRT_REG_WORD(®->hccr, HCCR_CLR_RISC_INT);
- RD_REG_WORD(®->hccr);
-
- /* Get mailbox data. */
- mbx = RD_MAILBOX_REG(ha, reg, 0);
- if (mbx > 0x3fff && mbx < 0x8000) {
- qla2x00_mbx_completion(ha,
- (uint16_t)mbx);
- status |= MBX_INTERRUPT;
- } else if (mbx > 0x7fff && mbx < 0xc000) {
- qla2x00_async_event(ha, mbx);
- } else {
- /*EMPTY*/
- DEBUG2(printk("scsi(%ld): Unrecognized "
- "interrupt type (%d)\n",
- ha->host_no, mbx));
- }
- /* Release mailbox registers. */
- WRT_REG_WORD(®->semaphore, 0);
- /* Workaround for ISP2100 chip. */
- if (IS_QLA2100(ha))
- RD_REG_WORD(®->semaphore);
- } else {
- qla2x00_process_response_queue(ha);
-
- WRT_REG_WORD(®->hccr, HCCR_CLR_RISC_INT);
- RD_REG_WORD(®->hccr);
- }
- } else /* IS_QLA23XX(ha) */ {
- stat = RD_REG_DWORD(®->u.isp2300.host_status);
- if (stat & HSR_RISC_PAUSED) {
- hccr = RD_REG_WORD(®->hccr);
- if (hccr & (BIT_15 | BIT_13 | BIT_11 | BIT_8))
- qla_printk(KERN_INFO, ha,
- "Parity error -- HCCR=%x.\n", hccr);
- else
- qla_printk(KERN_INFO, ha,
- "RISC paused -- HCCR=%x\n", hccr);
-
- /*
- * Issue a "HARD" reset in order for the RISC
- * interrupt bit to be cleared. Schedule a big
- * hammmer to get out of the RISC PAUSED state.
- */
- WRT_REG_WORD(®->hccr, HCCR_RESET_RISC);
- RD_REG_WORD(®->hccr);
- set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
- break;
- } else if ((stat & HSR_RISC_INT) == 0)
- break;
+ if (RD_REG_WORD(®->semaphore) & BIT_0) {
+ WRT_REG_WORD(®->hccr, HCCR_CLR_RISC_INT);
+ RD_REG_WORD(®->hccr);
- mbx = MSW(stat);
- switch (stat & 0xff) {
- case 0x13:
- qla2x00_process_response_queue(ha);
- break;
- case 0x1:
- case 0x2:
- case 0x10:
- case 0x11:
+ /* Get mailbox data. */
+ mbx = RD_MAILBOX_REG(ha, reg, 0);
+ if (mbx > 0x3fff && mbx < 0x8000) {
qla2x00_mbx_completion(ha, (uint16_t)mbx);
status |= MBX_INTERRUPT;
-
- /* Release mailbox registers. */
- WRT_REG_WORD(®->semaphore, 0);
- break;
- case 0x12:
- qla2x00_async_event(ha, mbx);
- break;
- case 0x15:
- mbx = mbx << 16 | MBA_CMPLT_1_16BIT;
+ } else if (mbx > 0x7fff && mbx < 0xc000) {
qla2x00_async_event(ha, mbx);
- break;
- case 0x16:
- mbx = mbx << 16 | MBA_SCSI_COMPLETION;
- qla2x00_async_event(ha, mbx);
- break;
- default:
+ } else {
+ /*EMPTY*/
DEBUG2(printk("scsi(%ld): Unrecognized "
"interrupt type (%d)\n",
- ha->host_no, stat & 0xff));
- break;
+ ha->host_no, mbx));
}
+ /* Release mailbox registers. */
+ WRT_REG_WORD(®->semaphore, 0);
+ RD_REG_WORD(®->semaphore);
+ } else {
+ qla2x00_process_response_queue(ha);
+
WRT_REG_WORD(®->hccr, HCCR_CLR_RISC_INT);
- RD_REG_WORD_RELAXED(®->hccr);
+ RD_REG_WORD(®->hccr);
}
}
-
spin_unlock_irqrestore(&ha->hardware_lock, flags);
qla2x00_next(ha);
- ha->last_irq_cpu = smp_processor_id();
+ ha->last_irq_cpu = _smp_processor_id();
ha->total_isr_cnt++;
if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
(status & MBX_INTERRUPT) && ha->flags.mbox_int) {
+ spin_lock_irqsave(&ha->mbx_reg_lock, flags);
- /* There was a mailbox completion */
- DEBUG3(printk("%s(%ld): Going to get mbx reg lock.\n",
- __func__, ha->host_no));
+ set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
+ up(&ha->mbx_intr_sem);
- spin_lock_irqsave(&ha->mbx_reg_lock, mbx_flags);
+ spin_unlock_irqrestore(&ha->mbx_reg_lock, flags);
+ }
- if (ha->mcp == NULL) {
- DEBUG3(printk("%s(%ld): Error mbx pointer.\n",
- __func__, ha->host_no));
- } else {
- DEBUG3(printk("%s(%ld): Going to set mbx intr flags. "
- "cmd=%x.\n",
- __func__, ha->host_no, ha->mcp->mb[0]));
- }
- set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
+ if (!list_empty(&ha->done_queue))
+ qla2x00_done(ha);
- DEBUG3(printk("%s(%ld): Going to wake up mbx function for "
- "completion.\n",
- __func__, ha->host_no));
+ return (IRQ_HANDLED);
+}
- up(&ha->mbx_intr_sem);
+/**
+ * qla2300_intr_handler() - Process interrupts for the ISP23xx and ISP63xx.
+ * @irq:
+ * @dev_id: SCSI driver HA context
+ * @regs:
+ *
+ * Called by system whenever the host adapter generates an interrupt.
+ *
+ * Returns handled flag.
+ */
+irqreturn_t
+qla2300_intr_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+ scsi_qla_host_t *ha;
+ device_reg_t __iomem *reg;
+ int status;
+ unsigned long flags;
+ unsigned long iter;
+ uint32_t stat;
+ uint32_t mbx;
+ uint16_t hccr;
- DEBUG3(printk("%s(%ld): Going to release mbx reg lock.\n",
- __func__, ha->host_no));
+ ha = (scsi_qla_host_t *) dev_id;
+ if (!ha) {
+ printk(KERN_INFO
+ "%s(): NULL host pointer\n", __func__);
+ return (IRQ_NONE);
+ }
+
+ reg = ha->iobase;
+ status = 0;
- spin_unlock_irqrestore(&ha->mbx_reg_lock, mbx_flags);
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ for (iter = 50; iter--; ) {
+ stat = RD_REG_DWORD(®->u.isp2300.host_status);
+ if (stat & HSR_RISC_PAUSED) {
+ hccr = RD_REG_WORD(®->hccr);
+ if (hccr & (BIT_15 | BIT_13 | BIT_11 | BIT_8))
+ qla_printk(KERN_INFO, ha,
+ "Parity error -- HCCR=%x.\n", hccr);
+ else
+ qla_printk(KERN_INFO, ha,
+ "RISC paused -- HCCR=%x\n", hccr);
+
+ /*
+ * Issue a "HARD" reset in order for the RISC
+ * interrupt bit to be cleared. Schedule a big
+ * hammmer to get out of the RISC PAUSED state.
+ */
+ WRT_REG_WORD(®->hccr, HCCR_RESET_RISC);
+ RD_REG_WORD(®->hccr);
+ set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
+ break;
+ } else if ((stat & HSR_RISC_INT) == 0)
+ break;
+
+ mbx = MSW(stat);
+ switch (stat & 0xff) {
+ case 0x13:
+ qla2x00_process_response_queue(ha);
+ break;
+ case 0x1:
+ case 0x2:
+ case 0x10:
+ case 0x11:
+ qla2x00_mbx_completion(ha, (uint16_t)mbx);
+ status |= MBX_INTERRUPT;
+
+ /* Release mailbox registers. */
+ WRT_REG_WORD(®->semaphore, 0);
+ break;
+ case 0x12:
+ qla2x00_async_event(ha, mbx);
+ break;
+ case 0x15:
+ mbx = mbx << 16 | MBA_CMPLT_1_16BIT;
+ qla2x00_async_event(ha, mbx);
+ break;
+ case 0x16:
+ mbx = mbx << 16 | MBA_SCSI_COMPLETION;
+ qla2x00_async_event(ha, mbx);
+ break;
+ default:
+ DEBUG2(printk("scsi(%ld): Unrecognized interrupt type "
+ "(%d)\n",
+ ha->host_no, stat & 0xff));
+ break;
+ }
+ WRT_REG_WORD(®->hccr, HCCR_CLR_RISC_INT);
+ RD_REG_WORD_RELAXED(®->hccr);
}
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
- if (!list_empty(&ha->done_queue))
- qla2x00_done(ha);
+ qla2x00_next(ha);
+ ha->last_irq_cpu = _smp_processor_id();
+ ha->total_isr_cnt++;
- /* Wakeup the DPC routine */
- if ((!ha->flags.mbox_busy &&
- (test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) ||
- test_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) ||
- test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags))) &&
- ha->dpc_wait && !ha->dpc_active) {
+ if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
+ (status & MBX_INTERRUPT) && ha->flags.mbox_int) {
+ spin_lock_irqsave(&ha->mbx_reg_lock, flags);
- up(ha->dpc_wait);
+ set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
+ up(&ha->mbx_intr_sem);
+
+ spin_unlock_irqrestore(&ha->mbx_reg_lock, flags);
}
+ if (!list_empty(&ha->done_queue))
+ qla2x00_done(ha);
+
return (IRQ_HANDLED);
}
qla2x00_mbx_completion(scsi_qla_host_t *ha, uint16_t mb0)
{
uint16_t cnt;
- uint16_t *wptr;
- device_reg_t *reg = ha->iobase;
+ uint16_t __iomem *wptr;
+ device_reg_t __iomem *reg = ha->iobase;
/* Load return mailbox registers. */
ha->flags.mbox_int = 1;
ha->mailbox_out[0] = mb0;
- wptr = (uint16_t *)MAILBOX_REG(ha, reg, 1);
+ wptr = (uint16_t __iomem *)MAILBOX_REG(ha, reg, 1);
for (cnt = 1; cnt < ha->mbx_count; cnt++) {
if (IS_QLA2200(ha) && cnt == 8)
- wptr = (uint16_t *)MAILBOX_REG(ha, reg, 8);
+ wptr = (uint16_t __iomem *)MAILBOX_REG(ha, reg, 8);
if (cnt == 4 || cnt == 5)
ha->mailbox_out[cnt] = qla2x00_debounce_register(wptr);
else
uint16_t handle_cnt;
uint16_t cnt;
uint32_t handles[5];
- device_reg_t *reg = ha->iobase;
+ device_reg_t __iomem *reg = ha->iobase;
uint32_t rscn_entry, host_pid;
uint8_t rscn_queue_index;
qla2100_fw_dump(ha, 1);
else
qla2300_fw_dump(ha, 1);
- set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
+
+ if (mb[1] == 0) {
+ qla_printk(KERN_INFO, ha,
+ "Unrecoverable Hardware Error: adapter marked "
+ "OFFLINE!\n");
+ ha->flags.online = 0;
+ } else
+ set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
break;
case MBA_REQ_TRANSFER_ERR: /* Request Transfer Error */
rscn_fcport = qla2x00_alloc_rscn_fcport(ha, GFP_ATOMIC);
if (rscn_fcport) {
DEBUG14(printk("scsi(%ld): Port Update -- "
- "creating RSCN fcport %p for login.\n",
- ha->host_no, rscn_fcport));
+ "creating RSCN fcport %p for %x/%x.\n",
+ ha->host_no, rscn_fcport, mb[1], mb[2]));
rscn_fcport->loop_id = mb[1];
rscn_fcport->d_id.b24 = INVALID_PORT_ID;
* event etc. earlier indicating loop is down) then process
* it. Otherwise ignore it and Wait for RSCN to come in.
*/
- if (atomic_read(&ha->loop_state) != LOOP_DOWN) {
+ atomic_set(&ha->loop_down_timer, 0);
+ if (atomic_read(&ha->loop_state) != LOOP_DOWN &&
+ atomic_read(&ha->loop_state) != LOOP_DEAD) {
DEBUG2(printk("scsi(%ld): Asynchronous PORT UPDATE "
"ignored.\n", ha->host_no));
break;
*/
atomic_set(&ha->loop_state, LOOP_UP);
- atomic_set(&ha->loop_down_timer, 0);
qla2x00_mark_all_devices_lost(ha);
ha->flags.rscn_queue_overflow = 1;
void
qla2x00_process_response_queue(struct scsi_qla_host *ha)
{
- device_reg_t *reg = ha->iobase;
+ device_reg_t __iomem *reg = ha->iobase;
sts_entry_t *pkt;
uint16_t handle_cnt;
uint16_t cnt;
sizeof(cp->sense_buffer))
sense_sz = le16_to_cpu(pkt->req_sense_length);
else
- sense_sz = sizeof(cp->sense_buffer) - 1;
+ sense_sz = sizeof(cp->sense_buffer);
CMD_ACTUAL_SNSLEN(cp) = sense_sz;
sp->request_sense_length = sense_sz;
sizeof(cp->sense_buffer))
sense_sz = le16_to_cpu(pkt->req_sense_length);
else
- sense_sz = sizeof(cp->sense_buffer) - 1;
+ sense_sz = sizeof(cp->sense_buffer);
CMD_ACTUAL_SNSLEN(cp) = sense_sz;
sp->request_sense_length = sense_sz;
case CS_TIMEOUT:
DEBUG2(printk(KERN_INFO
- "scsi(%ld:%d:%d:%d): TIMEOUT status detected 0x%x-0x%x.\n",
- ha->host_no, b, t, l, comp_status, scsi_status));
+ "scsi(%ld:%d:%d:%d): TIMEOUT status detected 0x%x-0x%x "
+ "sflags=%x.\n", ha->host_no, b, t, l, comp_status,
+ scsi_status, le16_to_cpu(pkt->status_flags)));
cp->result = DID_BUS_BUSY << 16;
git://git.onelab.eu / linux-2.6.git / blobdiff