#include <linux/moduleparam.h>
#include <linux/vmalloc.h>
-#include <linux/smp_lock.h>
#include <linux/delay.h>
+#include <linux/kthread.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsicam.h>
/*
* SRB allocation cache
*/
-static kmem_cache_t *srb_cachep;
+static struct kmem_cache *srb_cachep;
/*
* Ioctl related information.
int qlport_down_retry = 30;
module_param(qlport_down_retry, int, S_IRUGO|S_IRUSR);
MODULE_PARM_DESC(qlport_down_retry,
- "Maximum number of command retries to a port that returns"
+ "Maximum number of command retries to a port that returns "
"a PORT-DOWN status.");
int ql2xplogiabsentdevice;
module_param(ql2xplogiabsentdevice, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xplogiabsentdevice,
"Option to enable PLOGI to devices that are not present after "
- "a Fabric scan. This is needed for several broken switches."
+ "a Fabric scan. This is needed for several broken switches. "
"Default is 0 - no PLOGI. 1 - perfom PLOGI.");
int ql2xloginretrycount = 0;
MODULE_PARM_DESC(ql2xloginretrycount,
"Specify an alternate value for the NVRAM login retry count.");
-#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
-int ql2xfwloadflash;
-module_param(ql2xfwloadflash, int, S_IRUGO|S_IRUSR);
-MODULE_PARM_DESC(ql2xfwloadflash,
- "Load ISP24xx firmware image from FLASH (onboard memory).");
-#endif
+int ql2xallocfwdump = 1;
+module_param(ql2xallocfwdump, int, S_IRUGO|S_IRUSR);
+MODULE_PARM_DESC(ql2xallocfwdump,
+ "Option to enable allocation of memory for a firmware dump "
+ "during HBA initialization. Memory allocation requirements "
+ "vary by ISP type. Default is 1 - allocate memory.");
+
+int ql2xextended_error_logging;
+module_param(ql2xextended_error_logging, int, S_IRUGO|S_IRUSR);
+MODULE_PARM_DESC(ql2xextended_error_logging,
+ "Option to enable extended error logging, "
+ "Default is 0 - no logging. 1 - log errors.");
static void qla2x00_free_device(scsi_qla_host_t *);
"Enables FDMI registratons "
"Default is 0 - no FDMI. 1 - perfom FDMI.");
-int ql2xprocessrscn;
-module_param(ql2xprocessrscn, int, S_IRUGO|S_IRUSR);
-MODULE_PARM_DESC(ql2xprocessrscn,
- "Option to enable port RSCN handling via a series of less"
- "fabric intrusive ADISCs and PLOGIs.");
+#define MAX_Q_DEPTH 32
+static int ql2xmaxqdepth = MAX_Q_DEPTH;
+module_param(ql2xmaxqdepth, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(ql2xmaxqdepth,
+ "Maximum queue depth to report for target devices.");
+
+int ql2xqfullrampup = 120;
+module_param(ql2xqfullrampup, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(ql2xqfullrampup,
+ "Number of seconds to wait to begin to ramp-up the queue "
+ "depth for a device after a queue-full condition has been "
+ "detected. Default is 120 seconds.");
/*
* SCSI host template entry points
*/
static int qla2xxx_slave_configure(struct scsi_device * device);
static int qla2xxx_slave_alloc(struct scsi_device *);
+static int qla2xxx_scan_finished(struct Scsi_Host *, unsigned long time);
+static void qla2xxx_scan_start(struct Scsi_Host *);
static void qla2xxx_slave_destroy(struct scsi_device *);
static int qla2x00_queuecommand(struct scsi_cmnd *cmd,
void (*fn)(struct scsi_cmnd *));
static struct scsi_host_template qla2x00_driver_template = {
.module = THIS_MODULE,
- .name = "qla2xxx",
+ .name = QLA2XXX_DRIVER_NAME,
.queuecommand = qla2x00_queuecommand,
.eh_abort_handler = qla2xxx_eh_abort,
.slave_alloc = qla2xxx_slave_alloc,
.slave_destroy = qla2xxx_slave_destroy,
+ .scan_finished = qla2xxx_scan_finished,
+ .scan_start = qla2xxx_scan_start,
.change_queue_depth = qla2x00_change_queue_depth,
.change_queue_type = qla2x00_change_queue_type,
.this_id = -1,
static struct scsi_host_template qla24xx_driver_template = {
.module = THIS_MODULE,
- .name = "qla2xxx",
+ .name = QLA2XXX_DRIVER_NAME,
.queuecommand = qla24xx_queuecommand,
.eh_abort_handler = qla2xxx_eh_abort,
return str;
}
-char *
+static char *
qla2x00_fw_version_str(struct scsi_qla_host *ha, char *str)
{
char un_str[10];
return (str);
}
-char *
+static char *
qla24xx_fw_version_str(struct scsi_qla_host *ha, char *str)
{
sprintf(str, "%d.%02d.%02d ", ha->fw_major_version,
if (!sp)
return sp;
- atomic_set(&sp->ref_count, 1);
sp->ha = ha;
sp->fcport = fcport;
sp->cmd = cmd;
while ((!atomic_read(&ha->loop_down_timer) &&
atomic_read(&ha->loop_state) == LOOP_DOWN) ||
atomic_read(&ha->loop_state) != LOOP_READY) {
+ if (atomic_read(&ha->loop_state) == LOOP_DEAD) {
+ return_status = QLA_FUNCTION_FAILED;
+ break;
+ }
msleep(1000);
if (time_after_eq(jiffies, loop_timeout)) {
return_status = QLA_FUNCTION_FAILED;
return (return_status);
}
+static void
+qla2x00_block_error_handler(struct scsi_cmnd *cmnd)
+{
+ struct Scsi_Host *shost = cmnd->device->host;
+ struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
+ unsigned long flags;
+
+ spin_lock_irqsave(shost->host_lock, flags);
+ while (rport->port_state == FC_PORTSTATE_BLOCKED) {
+ spin_unlock_irqrestore(shost->host_lock, flags);
+ msleep(1000);
+ spin_lock_irqsave(shost->host_lock, flags);
+ }
+ spin_unlock_irqrestore(shost->host_lock, flags);
+ return;
+}
+
/**************************************************************************
* qla2xxx_eh_abort
*
* Either SUCCESS or FAILED.
*
* Note:
+* Only return FAILED if command not returned by firmware.
**************************************************************************/
-int
+static int
qla2xxx_eh_abort(struct scsi_cmnd *cmd)
{
scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
unsigned int id, lun;
unsigned long serial;
unsigned long flags;
+ int wait = 0;
+
+ qla2x00_block_error_handler(cmd);
if (!CMD_SP(cmd))
- return FAILED;
+ return SUCCESS;
- ret = FAILED;
+ ret = SUCCESS;
id = cmd->device->id;
lun = cmd->device->lun;
if (sp->cmd != cmd)
continue;
- DEBUG2(printk("%s(%ld): aborting sp %p from RISC. pid=%ld "
- "sp->state=%x\n", __func__, ha->host_no, sp, serial,
- sp->state));
- DEBUG3(qla2x00_print_scsi_cmd(cmd);)
+ DEBUG2(printk("%s(%ld): aborting sp %p from RISC. pid=%ld.\n",
+ __func__, ha->host_no, sp, serial));
+ DEBUG3(qla2x00_print_scsi_cmd(cmd));
spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (ha->isp_ops.abort_command(ha, sp)) {
} else {
DEBUG3(printk("%s(%ld): abort_command "
"mbx success.\n", __func__, ha->host_no));
- ret = SUCCESS;
+ wait = 1;
}
spin_lock_irqsave(&ha->hardware_lock, flags);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
/* Wait for the command to be returned. */
- if (ret == SUCCESS) {
+ if (wait) {
if (qla2x00_eh_wait_on_command(ha, cmd) != QLA_SUCCESS) {
qla_printk(KERN_ERR, ha,
"scsi(%ld:%d:%d): Abort handler timed out -- %lx "
"%x.\n", ha->host_no, id, lun, serial, ret);
+ ret = FAILED;
}
}
qla_printk(KERN_INFO, ha,
- "scsi(%ld:%d:%d): Abort command issued -- %lx %x.\n", ha->host_no,
- id, lun, serial, ret);
+ "scsi(%ld:%d:%d): Abort command issued -- %d %lx %x.\n",
+ ha->host_no, id, lun, wait, serial, ret);
return ret;
}
* SUCCESS/FAILURE (defined as macro in scsi.h).
*
**************************************************************************/
-int
+static int
qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
{
scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
- srb_t *sp;
int ret;
unsigned int id, lun;
unsigned long serial;
+ qla2x00_block_error_handler(cmd);
+
ret = FAILED;
id = cmd->device->id;
lun = cmd->device->lun;
serial = cmd->serial_number;
- sp = (srb_t *) CMD_SP(cmd);
- if (!sp || !fcport)
+ if (!fcport)
return ret;
qla_printk(KERN_INFO, ha,
#endif
} else {
DEBUG2(printk(KERN_INFO
- "%s failed: loop not ready\n",__func__);)
+ "%s failed: loop not ready\n",__func__));
}
if (ret == FAILED) {
* SUCCESS/FAILURE (defined as macro in scsi.h).
*
**************************************************************************/
-int
+static int
qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
{
scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
- srb_t *sp;
int ret;
unsigned int id, lun;
unsigned long serial;
+ qla2x00_block_error_handler(cmd);
+
ret = FAILED;
id = cmd->device->id;
lun = cmd->device->lun;
serial = cmd->serial_number;
- sp = (srb_t *) CMD_SP(cmd);
- if (!sp || !fcport)
+ if (!fcport)
return ret;
qla_printk(KERN_INFO, ha,
*
* Note:
**************************************************************************/
-int
+static int
qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
{
scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
- srb_t *sp;
int ret;
unsigned int id, lun;
unsigned long serial;
+ qla2x00_block_error_handler(cmd);
+
ret = FAILED;
id = cmd->device->id;
lun = cmd->device->lun;
serial = cmd->serial_number;
- sp = (srb_t *) CMD_SP(cmd);
- if (!sp || !fcport)
+ if (!fcport)
return ret;
qla_printk(KERN_INFO, ha,
static int
qla2x00_loop_reset(scsi_qla_host_t *ha)
{
- int status = QLA_SUCCESS;
+ int ret;
struct fc_port *fcport;
+ if (ha->flags.enable_lip_full_login) {
+ ret = qla2x00_full_login_lip(ha);
+ if (ret != QLA_SUCCESS) {
+ DEBUG2_3(printk("%s(%ld): bus_reset failed: "
+ "full_login_lip=%d.\n", __func__, ha->host_no,
+ ret));
+ }
+ atomic_set(&ha->loop_state, LOOP_DOWN);
+ atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
+ qla2x00_mark_all_devices_lost(ha, 0);
+ qla2x00_wait_for_loop_ready(ha);
+ }
+
if (ha->flags.enable_lip_reset) {
- status = qla2x00_lip_reset(ha);
+ ret = qla2x00_lip_reset(ha);
+ if (ret != QLA_SUCCESS) {
+ DEBUG2_3(printk("%s(%ld): bus_reset failed: "
+ "lip_reset=%d.\n", __func__, ha->host_no, ret));
+ }
+ qla2x00_wait_for_loop_ready(ha);
}
- if (status == QLA_SUCCESS && ha->flags.enable_target_reset) {
+ if (ha->flags.enable_target_reset) {
list_for_each_entry(fcport, &ha->fcports, list) {
if (fcport->port_type != FCT_TARGET)
continue;
- status = qla2x00_device_reset(ha, fcport);
- if (status != QLA_SUCCESS)
- break;
+ ret = qla2x00_device_reset(ha, fcport);
+ if (ret != QLA_SUCCESS) {
+ DEBUG2_3(printk("%s(%ld): bus_reset failed: "
+ "target_reset=%d d_id=%x.\n", __func__,
+ ha->host_no, ret, fcport->d_id.b24));
+ }
}
}
- if (status == QLA_SUCCESS &&
- ((!ha->flags.enable_target_reset &&
- !ha->flags.enable_lip_reset) ||
- ha->flags.enable_lip_full_login)) {
-
- status = qla2x00_full_login_lip(ha);
- }
-
/* Issue marker command only when we are going to start the I/O */
ha->marker_needed = 1;
- if (status) {
- /* Empty */
- DEBUG2_3(printk("%s(%ld): **** FAILED ****\n",
- __func__,
- ha->host_no);)
- } else {
- /* Empty */
- DEBUG3(printk("%s(%ld): exiting normally.\n",
- __func__,
- ha->host_no);)
- }
-
- return(status);
+ return QLA_SUCCESS;
}
/*
struct fc_rport *rport = starget_to_rport(sdev->sdev_target);
if (sdev->tagged_supported)
- scsi_activate_tcq(sdev, 32);
+ scsi_activate_tcq(sdev, ha->max_q_depth);
else
- scsi_deactivate_tcq(sdev, 32);
+ scsi_deactivate_tcq(sdev, ha->max_q_depth);
rport->dev_loss_tmo = ha->port_down_retry_count + 5;
pci_set_consistent_dma_mask(ha->pdev, DMA_32BIT_MASK);
}
+static inline void
+qla2x00_set_isp_flags(scsi_qla_host_t *ha)
+{
+ ha->device_type = DT_EXTENDED_IDS;
+ switch (ha->pdev->device) {
+ case PCI_DEVICE_ID_QLOGIC_ISP2100:
+ ha->device_type |= DT_ISP2100;
+ ha->device_type &= ~DT_EXTENDED_IDS;
+ ha->fw_srisc_address = RISC_START_ADDRESS_2100;
+ break;
+ case PCI_DEVICE_ID_QLOGIC_ISP2200:
+ ha->device_type |= DT_ISP2200;
+ ha->device_type &= ~DT_EXTENDED_IDS;
+ ha->fw_srisc_address = RISC_START_ADDRESS_2100;
+ break;
+ case PCI_DEVICE_ID_QLOGIC_ISP2300:
+ ha->device_type |= DT_ISP2300;
+ ha->device_type |= DT_ZIO_SUPPORTED;
+ ha->fw_srisc_address = RISC_START_ADDRESS_2300;
+ break;
+ case PCI_DEVICE_ID_QLOGIC_ISP2312:
+ ha->device_type |= DT_ISP2312;
+ ha->device_type |= DT_ZIO_SUPPORTED;
+ ha->fw_srisc_address = RISC_START_ADDRESS_2300;
+ break;
+ case PCI_DEVICE_ID_QLOGIC_ISP2322:
+ ha->device_type |= DT_ISP2322;
+ ha->device_type |= DT_ZIO_SUPPORTED;
+ if (ha->pdev->subsystem_vendor == 0x1028 &&
+ ha->pdev->subsystem_device == 0x0170)
+ ha->device_type |= DT_OEM_001;
+ ha->fw_srisc_address = RISC_START_ADDRESS_2300;
+ break;
+ case PCI_DEVICE_ID_QLOGIC_ISP6312:
+ ha->device_type |= DT_ISP6312;
+ ha->fw_srisc_address = RISC_START_ADDRESS_2300;
+ break;
+ case PCI_DEVICE_ID_QLOGIC_ISP6322:
+ ha->device_type |= DT_ISP6322;
+ ha->fw_srisc_address = RISC_START_ADDRESS_2300;
+ break;
+ case PCI_DEVICE_ID_QLOGIC_ISP2422:
+ ha->device_type |= DT_ISP2422;
+ ha->device_type |= DT_ZIO_SUPPORTED;
+ ha->fw_srisc_address = RISC_START_ADDRESS_2400;
+ break;
+ case PCI_DEVICE_ID_QLOGIC_ISP2432:
+ ha->device_type |= DT_ISP2432;
+ ha->device_type |= DT_ZIO_SUPPORTED;
+ ha->fw_srisc_address = RISC_START_ADDRESS_2400;
+ break;
+ case PCI_DEVICE_ID_QLOGIC_ISP5422:
+ ha->device_type |= DT_ISP5422;
+ ha->fw_srisc_address = RISC_START_ADDRESS_2400;
+ break;
+ case PCI_DEVICE_ID_QLOGIC_ISP5432:
+ ha->device_type |= DT_ISP5432;
+ ha->fw_srisc_address = RISC_START_ADDRESS_2400;
+ break;
+ }
+}
+
static int
qla2x00_iospace_config(scsi_qla_host_t *ha)
{
goto iospace_error_exit;
}
- if (pci_request_regions(ha->pdev, ha->brd_info->drv_name)) {
+ if (pci_request_regions(ha->pdev, QLA2XXX_DRIVER_NAME)) {
qla_printk(KERN_WARNING, ha,
"Failed to reserve PIO/MMIO regions (%s)\n",
pci_name(ha->pdev));
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
+static void
+qla2xxx_scan_start(struct Scsi_Host *shost)
+{
+ scsi_qla_host_t *ha = (scsi_qla_host_t *)shost->hostdata;
+
+ set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
+ set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags);
+ set_bit(RSCN_UPDATE, &ha->dpc_flags);
+}
+
+static int
+qla2xxx_scan_finished(struct Scsi_Host *shost, unsigned long time)
+{
+ scsi_qla_host_t *ha = (scsi_qla_host_t *)shost->hostdata;
+
+ if (!ha->host)
+ return 1;
+ if (time > ha->loop_reset_delay * HZ)
+ return 1;
+
+ return atomic_read(&ha->loop_state) == LOOP_READY;
+}
+
/*
* PCI driver interface
*/
-int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info)
+static int __devinit
+qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
int ret = -ENODEV;
device_reg_t __iomem *reg;
struct Scsi_Host *host;
scsi_qla_host_t *ha;
unsigned long flags = 0;
- unsigned long wait_switch = 0;
char pci_info[20];
char fw_str[30];
- fc_port_t *fcport;
struct scsi_host_template *sht;
if (pci_enable_device(pdev))
sht = &qla2x00_driver_template;
if (pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422 ||
- pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432)
+ pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432 ||
+ pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5422 ||
+ pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5432)
sht = &qla24xx_driver_template;
host = scsi_host_alloc(sht, sizeof(scsi_qla_host_t));
if (host == NULL) {
ha->pdev = pdev;
ha->host = host;
ha->host_no = host->host_no;
- ha->brd_info = brd_info;
- sprintf(ha->host_str, "%s_%ld", ha->brd_info->drv_name, ha->host_no);
+ sprintf(ha->host_str, "%s_%ld", QLA2XXX_DRIVER_NAME, ha->host_no);
- ha->dpc_pid = -1;
+ /* Set ISP-type information. */
+ qla2x00_set_isp_flags(ha);
/* Configure PCI I/O space */
ret = qla2x00_iospace_config(ha);
spin_lock_init(&ha->hardware_lock);
ha->prev_topology = 0;
- ha->ports = MAX_BUSES;
ha->init_cb_size = sizeof(init_cb_t);
ha->mgmt_svr_loop_id = MANAGEMENT_SERVER;
- ha->link_data_rate = LDR_UNKNOWN;
+ ha->link_data_rate = PORT_SPEED_UNKNOWN;
ha->optrom_size = OPTROM_SIZE_2300;
+ ha->max_q_depth = MAX_Q_DEPTH;
+ if (ql2xmaxqdepth != 0 && ql2xmaxqdepth <= 0xffffU)
+ ha->max_q_depth = ql2xmaxqdepth;
+
/* Assign ISP specific operations. */
ha->isp_ops.pci_config = qla2100_pci_config;
ha->isp_ops.reset_chip = qla2x00_reset_chip;
ha->isp_ops.read_nvram = qla2x00_read_nvram_data;
ha->isp_ops.write_nvram = qla2x00_write_nvram_data;
ha->isp_ops.fw_dump = qla2100_fw_dump;
- ha->isp_ops.ascii_fw_dump = qla2100_ascii_fw_dump;
ha->isp_ops.read_optrom = qla2x00_read_optrom_data;
ha->isp_ops.write_optrom = qla2x00_write_optrom_data;
if (IS_QLA2100(ha)) {
ha->isp_ops.pci_config = qla2300_pci_config;
ha->isp_ops.intr_handler = qla2300_intr_handler;
ha->isp_ops.fw_dump = qla2300_fw_dump;
- ha->isp_ops.ascii_fw_dump = qla2300_ascii_fw_dump;
ha->isp_ops.beacon_on = qla2x00_beacon_on;
ha->isp_ops.beacon_off = qla2x00_beacon_off;
ha->isp_ops.beacon_blink = qla2x00_beacon_blink;
ha->gid_list_info_size = 6;
if (IS_QLA2322(ha) || IS_QLA6322(ha))
ha->optrom_size = OPTROM_SIZE_2322;
- } else if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+ } else if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
host->max_id = MAX_TARGETS_2200;
ha->mbx_count = MAILBOX_REGISTER_COUNT;
ha->request_q_length = REQUEST_ENTRY_CNT_24XX;
ha->isp_ops.nvram_config = qla24xx_nvram_config;
ha->isp_ops.update_fw_options = qla24xx_update_fw_options;
ha->isp_ops.load_risc = qla24xx_load_risc;
-#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
- if (ql2xfwloadflash)
- ha->isp_ops.load_risc = qla24xx_load_risc_flash;
-#endif
ha->isp_ops.pci_info_str = qla24xx_pci_info_str;
ha->isp_ops.fw_version_str = qla24xx_fw_version_str;
ha->isp_ops.intr_handler = qla24xx_intr_handler;
ha->isp_ops.read_nvram = qla24xx_read_nvram_data;
ha->isp_ops.write_nvram = qla24xx_write_nvram_data;
ha->isp_ops.fw_dump = qla24xx_fw_dump;
- ha->isp_ops.ascii_fw_dump = qla24xx_ascii_fw_dump;
ha->isp_ops.read_optrom = qla24xx_read_optrom_data;
ha->isp_ops.write_optrom = qla24xx_write_optrom_data;
ha->isp_ops.beacon_on = qla24xx_beacon_on;
INIT_LIST_HEAD(&ha->list);
INIT_LIST_HEAD(&ha->fcports);
- INIT_LIST_HEAD(&ha->rscn_fcports);
/*
* These locks are used to prevent more than one CPU
*/
spin_lock_init(&ha->mbx_reg_lock);
- init_completion(&ha->dpc_inited);
- init_completion(&ha->dpc_exited);
-
qla2x00_config_dma_addressing(ha);
if (qla2x00_mem_alloc(ha)) {
qla_printk(KERN_WARNING, ha,
/*
* Startup the kernel thread for this host adapter
*/
- ha->dpc_should_die = 0;
- ha->dpc_pid = kernel_thread(qla2x00_do_dpc, ha, 0);
- if (ha->dpc_pid < 0) {
+ ha->dpc_thread = kthread_create(qla2x00_do_dpc, ha,
+ "%s_dpc", ha->host_str);
+ if (IS_ERR(ha->dpc_thread)) {
qla_printk(KERN_WARNING, ha,
"Unable to start DPC thread!\n");
-
- ret = -ENODEV;
+ ret = PTR_ERR(ha->dpc_thread);
goto probe_failed;
}
- wait_for_completion(&ha->dpc_inited);
host->this_id = 255;
host->cmd_per_lun = 3;
host->unique_id = ha->instance;
host->max_cmd_len = MAX_CMDSZ;
- host->max_channel = ha->ports - 1;
+ host->max_channel = MAX_BUSES - 1;
host->max_lun = MAX_LUNS;
host->transportt = qla2xxx_transport_template;
ret = request_irq(pdev->irq, ha->isp_ops.intr_handler,
- SA_INTERRUPT|SA_SHIRQ, ha->brd_info->drv_name, ha);
+ IRQF_DISABLED|IRQF_SHARED, QLA2XXX_DRIVER_NAME, ha);
if (ret) {
qla_printk(KERN_WARNING, ha,
"Failed to reserve interrupt %d already in use.\n",
spin_lock_irqsave(&ha->hardware_lock, flags);
reg = ha->iobase;
- if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+ if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
WRT_REG_DWORD(®->isp24.hccr, HCCRX_CLR_HOST_INT);
WRT_REG_DWORD(®->isp24.hccr, HCCRX_CLR_RISC_INT);
} else {
ha->isp_ops.enable_intrs(ha);
- /* v2.19.5b6 */
- /*
- * Wait around max loop_reset_delay secs for the devices to come
- * on-line. We don't want Linux scanning before we are ready.
- *
- */
- for (wait_switch = jiffies + (ha->loop_reset_delay * HZ);
- time_before(jiffies,wait_switch) &&
- !(ha->device_flags & (DFLG_NO_CABLE | DFLG_FABRIC_DEVICES))
- && (ha->device_flags & SWITCH_FOUND) ;) {
-
- qla2x00_check_fabric_devices(ha);
-
- msleep(10);
- }
-
pci_set_drvdata(pdev, ha);
+
ha->flags.init_done = 1;
+ ha->flags.online = 1;
+
num_hosts++;
ret = scsi_add_host(host, &pdev->dev);
if (ret)
goto probe_failed;
+ scsi_scan_host(host);
+
qla2x00_alloc_sysfs_attr(ha);
qla2x00_init_host_attr(ha);
ha->flags.enable_64bit_addressing ? '+': '-', ha->host_no,
ha->isp_ops.fw_version_str(ha, fw_str));
- /* Go with fc_rport registration. */
- list_for_each_entry(fcport, &ha->fcports, list)
- qla2x00_reg_remote_port(ha, fcport);
-
return 0;
probe_failed:
probe_out:
return ret;
}
-EXPORT_SYMBOL_GPL(qla2x00_probe_one);
-void qla2x00_remove_one(struct pci_dev *pdev)
+static void __devexit
+qla2x00_remove_one(struct pci_dev *pdev)
{
scsi_qla_host_t *ha;
pci_set_drvdata(pdev, NULL);
}
-EXPORT_SYMBOL_GPL(qla2x00_remove_one);
static void
qla2x00_free_device(scsi_qla_host_t *ha)
{
- int ret;
-
- /* Abort any outstanding IO descriptors. */
- if (!IS_QLA2100(ha) && !IS_QLA2200(ha))
- qla2x00_cancel_io_descriptors(ha);
-
/* Disable timer */
if (ha->timer_active)
qla2x00_stop_timer(ha);
/* Kill the kernel thread for this host */
- if (ha->dpc_pid >= 0) {
- ha->dpc_should_die = 1;
- wmb();
- ret = kill_proc(ha->dpc_pid, SIGHUP, 1);
- if (ret) {
- qla_printk(KERN_ERR, ha,
- "Unable to signal DPC thread -- (%d)\n", ret);
+ if (ha->dpc_thread) {
+ struct task_struct *t = ha->dpc_thread;
- /* TODO: SOMETHING MORE??? */
- } else {
- wait_for_completion(&ha->dpc_exited);
- }
+ /*
+ * qla2xxx_wake_dpc checks for ->dpc_thread
+ * so we need to zero it out.
+ */
+ ha->dpc_thread = NULL;
+ kthread_stop(t);
}
+ if (ha->eft)
+ qla2x00_trace_control(ha, TC_DISABLE, 0, 0);
+
+ ha->flags.online = 0;
+
/* Stop currently executing firmware. */
- qla2x00_stop_firmware(ha);
+ qla2x00_try_to_stop_firmware(ha);
/* turn-off interrupts on the card */
if (ha->interrupts_on)
qla2x00_mem_free(ha);
- ha->flags.online = 0;
-
/* Detach interrupts */
- if (ha->pdev->irq)
- free_irq(ha->pdev->irq, ha);
+ if (ha->host->irq)
+ free_irq(ha->host->irq, ha);
/* release io space registers */
if (ha->iobase)
atomic_set(&fcport->state, FCS_DEVICE_LOST);
}
- if (defer && ha->dpc_wait && !ha->dpc_active)
- up(ha->dpc_wait);
+ if (defer)
+ qla2xxx_wake_dpc(ha);
}
/*
continue;
}
- ha->rlc_rsp = dma_alloc_coherent(&ha->pdev->dev,
- sizeof(rpt_lun_cmd_rsp_t), &ha->rlc_rsp_dma, GFP_KERNEL);
- if (ha->rlc_rsp == NULL) {
- qla_printk(KERN_WARNING, ha,
- "Memory Allocation failed - rlc");
-
- qla2x00_mem_free(ha);
- msleep(100);
-
- continue;
- }
-
- snprintf(name, sizeof(name), "qla2xxx_%ld", ha->host_no);
+ snprintf(name, sizeof(name), "%s_%ld", QLA2XXX_DRIVER_NAME,
+ ha->host_no);
ha->s_dma_pool = dma_pool_create(name, &ha->pdev->dev,
DMA_POOL_SIZE, 8, 0);
if (ha->s_dma_pool == NULL) {
}
memset(ha->init_cb, 0, ha->init_cb_size);
- /* Get consistent memory allocated for Get Port Database cmd */
- ha->iodesc_pd = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
- &ha->iodesc_pd_dma);
- if (ha->iodesc_pd == NULL) {
- /* error */
- qla_printk(KERN_WARNING, ha,
- "Memory Allocation failed - iodesc_pd\n");
-
- qla2x00_mem_free(ha);
- msleep(100);
-
- continue;
- }
- memset(ha->iodesc_pd, 0, PORT_DATABASE_SIZE);
-
- /* Allocate ioctl related memory. */
- if (qla2x00_alloc_ioctl_mem(ha)) {
- qla_printk(KERN_WARNING, ha,
- "Memory Allocation failed - ioctl_mem\n");
-
- qla2x00_mem_free(ha);
- msleep(100);
-
- continue;
- }
-
if (qla2x00_allocate_sp_pool(ha)) {
qla_printk(KERN_WARNING, ha,
"Memory Allocation failed - "
continue;
}
memset(ha->ct_sns, 0, sizeof(struct ct_sns_pkt));
+
+ if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
+ /*
+ * Get consistent memory allocated for SFP
+ * block.
+ */
+ ha->sfp_data = dma_pool_alloc(ha->s_dma_pool,
+ GFP_KERNEL, &ha->sfp_data_dma);
+ if (ha->sfp_data == NULL) {
+ qla_printk(KERN_WARNING, ha,
+ "Memory Allocation failed - "
+ "sfp_data\n");
+
+ qla2x00_mem_free(ha);
+ msleep(100);
+
+ continue;
+ }
+ memset(ha->sfp_data, 0, SFP_BLOCK_SIZE);
+ }
}
/* Done all allocations without any error. */
{
struct list_head *fcpl, *fcptemp;
fc_port_t *fcport;
- unsigned int wtime;/* max wait time if mbx cmd is busy. */
if (ha == NULL) {
/* error */
return;
}
- /* Make sure all other threads are stopped. */
- wtime = 60 * 1000;
- while (ha->dpc_wait && wtime)
- wtime = msleep_interruptible(wtime);
-
- /* free ioctl memory */
- qla2x00_free_ioctl_mem(ha);
-
/* free sp pool */
qla2x00_free_sp_pool(ha);
+ if (ha->fw_dump) {
+ if (ha->eft)
+ dma_free_coherent(&ha->pdev->dev,
+ ntohl(ha->fw_dump->eft_size), ha->eft, ha->eft_dma);
+ vfree(ha->fw_dump);
+ }
+
if (ha->sns_cmd)
dma_free_coherent(&ha->pdev->dev, sizeof(struct sns_cmd_pkt),
ha->sns_cmd, ha->sns_cmd_dma);
dma_free_coherent(&ha->pdev->dev, sizeof(struct ct_sns_pkt),
ha->ct_sns, ha->ct_sns_dma);
+ if (ha->sfp_data)
+ dma_pool_free(ha->s_dma_pool, ha->sfp_data, ha->sfp_data_dma);
+
if (ha->ms_iocb)
dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma);
- if (ha->iodesc_pd)
- dma_pool_free(ha->s_dma_pool, ha->iodesc_pd, ha->iodesc_pd_dma);
-
if (ha->init_cb)
dma_pool_free(ha->s_dma_pool, ha->init_cb, ha->init_cb_dma);
if (ha->s_dma_pool)
dma_pool_destroy(ha->s_dma_pool);
- if (ha->rlc_rsp)
- dma_free_coherent(&ha->pdev->dev,
- sizeof(rpt_lun_cmd_rsp_t), ha->rlc_rsp,
- ha->rlc_rsp_dma);
-
if (ha->gid_list)
dma_free_coherent(&ha->pdev->dev, GID_LIST_SIZE, ha->gid_list,
ha->gid_list_dma);
(ha->request_q_length + 1) * sizeof(request_t),
ha->request_ring, ha->request_dma);
+ ha->eft = NULL;
+ ha->eft_dma = 0;
ha->sns_cmd = NULL;
ha->sns_cmd_dma = 0;
ha->ct_sns = NULL;
ha->ct_sns_dma = 0;
ha->ms_iocb = NULL;
ha->ms_iocb_dma = 0;
- ha->iodesc_pd = NULL;
- ha->iodesc_pd_dma = 0;
ha->init_cb = NULL;
ha->init_cb_dma = 0;
ha->s_dma_pool = NULL;
- ha->rlc_rsp = NULL;
- ha->rlc_rsp_dma = 0;
ha->gid_list = NULL;
ha->gid_list_dma = 0;
}
INIT_LIST_HEAD(&ha->fcports);
- if (ha->fw_dump)
- free_pages((unsigned long)ha->fw_dump, ha->fw_dump_order);
-
- vfree(ha->fw_dump24);
-
- vfree(ha->fw_dump_buffer);
-
ha->fw_dump = NULL;
- ha->fw_dump24 = NULL;
ha->fw_dumped = 0;
ha->fw_dump_reading = 0;
- ha->fw_dump_buffer = NULL;
vfree(ha->optrom_buffer);
}
*
* Context:
* Kernel context.
- *
- * Note: Sets the ref_count for non Null sp to one.
*/
static int
qla2x00_allocate_sp_pool(scsi_qla_host_t *ha)
int rval;
rval = QLA_SUCCESS;
- ha->srb_mempool = mempool_create(SRB_MIN_REQ, mempool_alloc_slab,
- mempool_free_slab, srb_cachep);
+ ha->srb_mempool = mempool_create_slab_pool(SRB_MIN_REQ, srb_cachep);
if (ha->srb_mempool == NULL) {
qla_printk(KERN_INFO, ha, "Unable to allocate SRB mempool.\n");
rval = QLA_FUNCTION_FAILED;
static int
qla2x00_do_dpc(void *data)
{
- DECLARE_MUTEX_LOCKED(sem);
scsi_qla_host_t *ha;
fc_port_t *fcport;
uint8_t status;
ha = (scsi_qla_host_t *)data;
- lock_kernel();
-
- daemonize("%s_dpc", ha->host_str);
- allow_signal(SIGHUP);
-
- ha->dpc_wait = &sem;
-
set_user_nice(current, -20);
- unlock_kernel();
-
- complete(&ha->dpc_inited);
-
- while (1) {
+ while (!kthread_should_stop()) {
DEBUG3(printk("qla2x00: DPC handler sleeping\n"));
- if (down_interruptible(&sem))
- break;
-
- if (ha->dpc_should_die)
- break;
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule();
+ __set_current_state(TASK_RUNNING);
DEBUG3(printk("qla2x00: DPC handler waking up\n"));
/* Initialization not yet finished. Don't do anything yet. */
- if (!ha->flags.init_done || ha->dpc_active)
+ if (!ha->flags.init_done)
continue;
DEBUG3(printk("scsi(%ld): DPC handler\n", ha->host_no));
next_loopid = 0;
list_for_each_entry(fcport, &ha->fcports, list) {
- if (fcport->port_type != FCT_TARGET)
- continue;
-
/*
* If the port is not ONLINE then try to login
* to it if we haven't run out of retries.
} else
status =
qla2x00_local_device_login(
- ha, fcport->loop_id);
+ ha, fcport);
if (status == QLA_SUCCESS) {
fcport->old_loop_id = fcport->loop_id;
/*
* Make sure that nobody tries to wake us up again.
*/
- ha->dpc_wait = NULL;
ha->dpc_active = 0;
- complete_and_exit(&ha->dpc_exited, 0);
+ return 0;
+}
+
+void
+qla2xxx_wake_dpc(scsi_qla_host_t *ha)
+{
+ if (ha->dpc_thread)
+ wake_up_process(ha->dpc_thread);
}
/*
test_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags) ||
test_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) ||
test_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags) ||
- test_bit(RELOGIN_NEEDED, &ha->dpc_flags)) &&
- ha->dpc_wait && !ha->dpc_active) {
-
- up(ha->dpc_wait);
- }
+ test_bit(RELOGIN_NEEDED, &ha->dpc_flags)))
+ qla2xxx_wake_dpc(ha);
qla2x00_restart_timer(ha, WATCH_INTERVAL);
}
return -ETIMEDOUT;
}
-#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
-
-#define qla2x00_release_firmware() do { } while (0)
-#define qla2x00_pci_module_init() (0)
-#define qla2x00_pci_module_exit() do { } while (0)
-
-#else /* !defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) */
-
/* Firmware interface routines. */
-#define FW_BLOBS 6
+#define FW_BLOBS 5
#define FW_ISP21XX 0
#define FW_ISP22XX 1
#define FW_ISP2300 2
#define FW_ISP2322 3
-#define FW_ISP63XX 4
-#define FW_ISP24XX 5
+#define FW_ISP24XX 4
+
+#define FW_FILE_ISP21XX "ql2100_fw.bin"
+#define FW_FILE_ISP22XX "ql2200_fw.bin"
+#define FW_FILE_ISP2300 "ql2300_fw.bin"
+#define FW_FILE_ISP2322 "ql2322_fw.bin"
+#define FW_FILE_ISP24XX "ql2400_fw.bin"
static DECLARE_MUTEX(qla_fw_lock);
+extern struct firmware ql2100_fw, ql2200_fw, ql2300_fw, ql2322_fw, ql2400_fw;
+
static struct fw_blob qla_fw_blobs[FW_BLOBS] = {
- { .name = "ql2100_fw.bin", .segs = { 0x1000, 0 }, },
- { .name = "ql2200_fw.bin", .segs = { 0x1000, 0 }, },
- { .name = "ql2300_fw.bin", .segs = { 0x800, 0 }, },
- { .name = "ql2322_fw.bin", .segs = { 0x800, 0x1c000, 0x1e000, 0 }, },
- { .name = "ql6312_fw.bin", .segs = { 0x800, 0 }, },
- { .name = "ql2400_fw.bin", },
+ { .name = FW_FILE_ISP21XX, .segs = { 0x1000, 0 }, .fw = &ql2100_fw },
+ { .name = FW_FILE_ISP22XX, .segs = { 0x1000, 0 }, .fw = &ql2200_fw },
+ { .name = FW_FILE_ISP2300, .segs = { 0x800, 0 }, .fw = &ql2300_fw },
+ { .name = FW_FILE_ISP2322, .segs = { 0x800, 0x1c000, 0x1e000, 0 }, .fw = &ql2322_fw },
+ { .name = FW_FILE_ISP24XX, .fw = &ql2400_fw },
};
struct fw_blob *
blob = &qla_fw_blobs[FW_ISP21XX];
} else if (IS_QLA2200(ha)) {
blob = &qla_fw_blobs[FW_ISP22XX];
- } else if (IS_QLA2300(ha) || IS_QLA2312(ha)) {
+ } else if (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA6312(ha)) {
blob = &qla_fw_blobs[FW_ISP2300];
- } else if (IS_QLA2322(ha)) {
+ } else if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
blob = &qla_fw_blobs[FW_ISP2322];
- } else if (IS_QLA6312(ha) || IS_QLA6322(ha)) {
- blob = &qla_fw_blobs[FW_ISP63XX];
- } else if (IS_QLA24XX(ha)) {
+ } else if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
blob = &qla_fw_blobs[FW_ISP24XX];
}
up(&qla_fw_lock);
}
-static struct qla_board_info qla_board_tbl = {
- .drv_name = "qla2xxx",
-};
-
static struct pci_device_id qla2xxx_pci_tbl[] = {
- { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2100,
- PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2200,
- PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2300,
- PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2312,
- PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2322,
- PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6312,
- PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6322,
- PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2422,
- PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2432,
- PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2100) },
+ { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2200) },
+ { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2300) },
+ { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2312) },
+ { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2322) },
+ { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6312) },
+ { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6322) },
+ { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2422) },
+ { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2432) },
+ { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5422) },
+ { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5432) },
{ 0 },
};
MODULE_DEVICE_TABLE(pci, qla2xxx_pci_tbl);
-static int __devinit
-qla2xxx_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
-{
- return qla2x00_probe_one(pdev, &qla_board_tbl);
-}
-
-static void __devexit
-qla2xxx_remove_one(struct pci_dev *pdev)
-{
- qla2x00_remove_one(pdev);
-}
-
static struct pci_driver qla2xxx_pci_driver = {
- .name = "qla2xxx",
+ .name = QLA2XXX_DRIVER_NAME,
.driver = {
.owner = THIS_MODULE,
},
.id_table = qla2xxx_pci_tbl,
- .probe = qla2xxx_probe_one,
- .remove = __devexit_p(qla2xxx_remove_one),
+ .probe = qla2x00_probe_one,
+ .remove = __devexit_p(qla2x00_remove_one),
};
-static inline int
-qla2x00_pci_module_init(void)
-{
- return pci_module_init(&qla2xxx_pci_driver);
-}
-
-static inline void
-qla2x00_pci_module_exit(void)
-{
- pci_unregister_driver(&qla2xxx_pci_driver);
-}
-
-#endif
-
/**
* qla2x00_module_init - Module initialization.
**/
/* Derive version string. */
strcpy(qla2x00_version_str, QLA2XXX_VERSION);
-#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
- strcat(qla2x00_version_str, "-fw");
-#endif
-#if DEBUG_QLA2100
- strcat(qla2x00_version_str, "-debug");
-#endif
+ if (ql2xextended_error_logging)
+ strcat(qla2x00_version_str, "-debug");
+
qla2xxx_transport_template =
fc_attach_transport(&qla2xxx_transport_functions);
if (!qla2xxx_transport_template)
return -ENODEV;
printk(KERN_INFO "QLogic Fibre Channel HBA Driver\n");
- ret = qla2x00_pci_module_init();
+ ret = pci_register_driver(&qla2xxx_pci_driver);
if (ret) {
kmem_cache_destroy(srb_cachep);
fc_release_transport(qla2xxx_transport_template);
static void __exit
qla2x00_module_exit(void)
{
- qla2x00_pci_module_exit();
- qla2x00_release_firmware();
+ pci_unregister_driver(&qla2xxx_pci_driver);
+ /* qla2x00_release_firmware(); */
kmem_cache_destroy(srb_cachep);
fc_release_transport(qla2xxx_transport_template);
}
MODULE_DESCRIPTION("QLogic Fibre Channel HBA Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(QLA2XXX_VERSION);
+MODULE_FIRMWARE(FW_FILE_ISP21XX);
+MODULE_FIRMWARE(FW_FILE_ISP22XX);
+MODULE_FIRMWARE(FW_FILE_ISP2300);
+MODULE_FIRMWARE(FW_FILE_ISP2322);
+MODULE_FIRMWARE(FW_FILE_ISP24XX);
git://git.onelab.eu / linux-2.6.git / blobdiff