--- /dev/null
+/*
+ * QLogic iSCSI HBA Driver
+ * Copyright (c) 2003-2006 QLogic Corporation
+ *
+ * See LICENSE.qla4xxx for copyright and licensing details.
+ */
+
+#include "ql4_def.h"
+
+/*
+ * QLogic ISP4xxx Hardware Support Function Prototypes.
+ */
+
+static void ql4xxx_set_mac_number(struct scsi_qla_host *ha)
+{
+ uint32_t value;
+ uint8_t func_number;
+ unsigned long flags;
+
+ /* Get the function number */
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ value = readw(&ha->reg->ctrl_status);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+ func_number = (uint8_t) ((value >> 4) & 0x30);
+ switch (value & ISP_CONTROL_FN_MASK) {
+ case ISP_CONTROL_FN0_SCSI:
+ ha->mac_index = 1;
+ break;
+ case ISP_CONTROL_FN1_SCSI:
+ ha->mac_index = 3;
+ break;
+ default:
+ DEBUG2(printk("scsi%ld: %s: Invalid function number, "
+ "ispControlStatus = 0x%x\n", ha->host_no,
+ __func__, value));
+ break;
+ }
+ DEBUG2(printk("scsi%ld: %s: mac_index %d.\n", ha->host_no, __func__,
+ ha->mac_index));
+}
+
+/**
+ * qla4xxx_free_ddb - deallocate ddb
+ * @ha: pointer to host adapter structure.
+ * @ddb_entry: pointer to device database entry
+ *
+ * This routine deallocates and unlinks the specified ddb_entry from the
+ * adapter's
+ **/
+void qla4xxx_free_ddb(struct scsi_qla_host *ha, struct ddb_entry *ddb_entry)
+{
+ /* Remove device entry from list */
+ list_del_init(&ddb_entry->list);
+
+ /* Remove device pointer from index mapping arrays */
+ ha->fw_ddb_index_map[ddb_entry->fw_ddb_index] =
+ (struct ddb_entry *) INVALID_ENTRY;
+ ha->tot_ddbs--;
+
+ /* Free memory and scsi-ml struct for device entry */
+ qla4xxx_destroy_sess(ddb_entry);
+}
+
+/**
+ * qla4xxx_free_ddb_list - deallocate all ddbs
+ * @ha: pointer to host adapter structure.
+ *
+ * This routine deallocates and removes all devices on the sppecified adapter.
+ **/
+void qla4xxx_free_ddb_list(struct scsi_qla_host *ha)
+{
+ struct list_head *ptr;
+ struct ddb_entry *ddb_entry;
+
+ while (!list_empty(&ha->ddb_list)) {
+ ptr = ha->ddb_list.next;
+ /* Free memory for device entry and remove */
+ ddb_entry = list_entry(ptr, struct ddb_entry, list);
+ qla4xxx_free_ddb(ha, ddb_entry);
+ }
+}
+
+/**
+ * qla4xxx_init_rings - initialize hw queues
+ * @ha: pointer to host adapter structure.
+ *
+ * This routine initializes the internal queues for the specified adapter.
+ * The QLA4010 requires us to restart the queues at index 0.
+ * The QLA4000 doesn't care, so just default to QLA4010's requirement.
+ **/
+int qla4xxx_init_rings(struct scsi_qla_host *ha)
+{
+ unsigned long flags = 0;
+
+ /* Initialize request queue. */
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ ha->request_out = 0;
+ ha->request_in = 0;
+ ha->request_ptr = &ha->request_ring[ha->request_in];
+ ha->req_q_count = REQUEST_QUEUE_DEPTH;
+
+ /* Initialize response queue. */
+ ha->response_in = 0;
+ ha->response_out = 0;
+ ha->response_ptr = &ha->response_ring[ha->response_out];
+
+ /*
+ * Initialize DMA Shadow registers. The firmware is really supposed to
+ * take care of this, but on some uniprocessor systems, the shadow
+ * registers aren't cleared-- causing the interrupt_handler to think
+ * there are responses to be processed when there aren't.
+ */
+ ha->shadow_regs->req_q_out = __constant_cpu_to_le32(0);
+ ha->shadow_regs->rsp_q_in = __constant_cpu_to_le32(0);
+ wmb();
+
+ writel(0, &ha->reg->req_q_in);
+ writel(0, &ha->reg->rsp_q_out);
+ readl(&ha->reg->rsp_q_out);
+
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+ return QLA_SUCCESS;
+}
+
+/**
+ * qla4xxx_validate_mac_address - validate adapter MAC address(es)
+ * @ha: pointer to host adapter structure.
+ *
+ **/
+static int qla4xxx_validate_mac_address(struct scsi_qla_host *ha)
+{
+ struct flash_sys_info *sys_info;
+ dma_addr_t sys_info_dma;
+ int status = QLA_ERROR;
+
+ sys_info = dma_alloc_coherent(&ha->pdev->dev, sizeof(*sys_info),
+ &sys_info_dma, GFP_KERNEL);
+ if (sys_info == NULL) {
+ DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n",
+ ha->host_no, __func__));
+
+ goto exit_validate_mac_no_free;
+ }
+ memset(sys_info, 0, sizeof(*sys_info));
+
+ /* Get flash sys info */
+ if (qla4xxx_get_flash(ha, sys_info_dma, FLASH_OFFSET_SYS_INFO,
+ sizeof(*sys_info)) != QLA_SUCCESS) {
+ DEBUG2(printk("scsi%ld: %s: get_flash FLASH_OFFSET_SYS_INFO "
+ "failed\n", ha->host_no, __func__));
+
+ goto exit_validate_mac;
+ }
+
+ /* Save M.A.C. address & serial_number */
+ memcpy(ha->my_mac, &sys_info->physAddr[0].address[0],
+ min(sizeof(ha->my_mac),
+ sizeof(sys_info->physAddr[0].address)));
+ memcpy(ha->serial_number, &sys_info->acSerialNumber,
+ min(sizeof(ha->serial_number),
+ sizeof(sys_info->acSerialNumber)));
+
+ status = QLA_SUCCESS;
+
+ exit_validate_mac:
+ dma_free_coherent(&ha->pdev->dev, sizeof(*sys_info), sys_info,
+ sys_info_dma);
+
+ exit_validate_mac_no_free:
+ return status;
+}
+
+/**
+ * qla4xxx_init_local_data - initialize adapter specific local data
+ * @ha: pointer to host adapter structure.
+ *
+ **/
+static int qla4xxx_init_local_data(struct scsi_qla_host *ha)
+{
+ /* Initilize aen queue */
+ ha->aen_q_count = MAX_AEN_ENTRIES;
+
+ return qla4xxx_get_firmware_status(ha);
+}
+
+static int qla4xxx_fw_ready(struct scsi_qla_host *ha)
+{
+ uint32_t timeout_count;
+ int ready = 0;
+
+ DEBUG2(dev_info(&ha->pdev->dev, "Waiting for Firmware Ready..\n"));
+ for (timeout_count = ADAPTER_INIT_TOV; timeout_count > 0;
+ timeout_count--) {
+ if (test_and_clear_bit(DPC_GET_DHCP_IP_ADDR, &ha->dpc_flags))
+ qla4xxx_get_dhcp_ip_address(ha);
+
+ /* Get firmware state. */
+ if (qla4xxx_get_firmware_state(ha) != QLA_SUCCESS) {
+ DEBUG2(printk("scsi%ld: %s: unable to get firmware "
+ "state\n", ha->host_no, __func__));
+ break;
+
+ }
+
+ if (ha->firmware_state & FW_STATE_ERROR) {
+ DEBUG2(printk("scsi%ld: %s: an unrecoverable error has"
+ " occurred\n", ha->host_no, __func__));
+ break;
+
+ }
+ if (ha->firmware_state & FW_STATE_CONFIG_WAIT) {
+ /*
+ * The firmware has not yet been issued an Initialize
+ * Firmware command, so issue it now.
+ */
+ if (qla4xxx_initialize_fw_cb(ha) == QLA_ERROR)
+ break;
+
+ /* Go back and test for ready state - no wait. */
+ continue;
+ }
+
+ if (ha->firmware_state == FW_STATE_READY) {
+ DEBUG2(dev_info(&ha->pdev->dev, "Firmware Ready..\n"));
+ /* The firmware is ready to process SCSI commands. */
+ DEBUG2(dev_info(&ha->pdev->dev,
+ "scsi%ld: %s: MEDIA TYPE - %s\n",
+ ha->host_no,
+ __func__, (ha->addl_fw_state &
+ FW_ADDSTATE_OPTICAL_MEDIA)
+ != 0 ? "OPTICAL" : "COPPER"));
+ DEBUG2(dev_info(&ha->pdev->dev,
+ "scsi%ld: %s: DHCP STATE Enabled "
+ "%s\n",
+ ha->host_no, __func__,
+ (ha->addl_fw_state &
+ FW_ADDSTATE_DHCP_ENABLED) != 0 ?
+ "YES" : "NO"));
+ DEBUG2(dev_info(&ha->pdev->dev,
+ "scsi%ld: %s: LINK %s\n",
+ ha->host_no, __func__,
+ (ha->addl_fw_state &
+ FW_ADDSTATE_LINK_UP) != 0 ?
+ "UP" : "DOWN"));
+ DEBUG2(dev_info(&ha->pdev->dev,
+ "scsi%ld: %s: iSNS Service "
+ "Started %s\n",
+ ha->host_no, __func__,
+ (ha->addl_fw_state &
+ FW_ADDSTATE_ISNS_SVC_ENABLED) != 0 ?
+ "YES" : "NO"));
+
+ ready = 1;
+ break;
+ }
+ DEBUG2(printk("scsi%ld: %s: waiting on fw, state=%x:%x - "
+ "seconds expired= %d\n", ha->host_no, __func__,
+ ha->firmware_state, ha->addl_fw_state,
+ timeout_count));
+ if (is_qla4032(ha) &&
+ !(ha->addl_fw_state & FW_ADDSTATE_LINK_UP) &&
+ (timeout_count < ADAPTER_INIT_TOV - 5)) {
+ break;
+ }
+
+ msleep(1000);
+ } /* end of for */
+
+ if (timeout_count == 0)
+ DEBUG2(printk("scsi%ld: %s: FW Initialization timed out!\n",
+ ha->host_no, __func__));
+
+ if (ha->firmware_state & FW_STATE_DHCP_IN_PROGRESS) {
+ DEBUG2(printk("scsi%ld: %s: FW is reporting its waiting to"
+ " grab an IP address from DHCP server\n",
+ ha->host_no, __func__));
+ ready = 1;
+ }
+
+ return ready;
+}
+
+/**
+ * qla4xxx_init_firmware - initializes the firmware.
+ * @ha: pointer to host adapter structure.
+ *
+ **/
+static int qla4xxx_init_firmware(struct scsi_qla_host *ha)
+{
+ int status = QLA_ERROR;
+
+ dev_info(&ha->pdev->dev, "Initializing firmware..\n");
+ if (qla4xxx_initialize_fw_cb(ha) == QLA_ERROR) {
+ DEBUG2(printk("scsi%ld: %s: Failed to initialize firmware "
+ "control block\n", ha->host_no, __func__));
+ return status;
+ }
+ if (!qla4xxx_fw_ready(ha))
+ return status;
+
+ set_bit(AF_ONLINE, &ha->flags);
+ return qla4xxx_get_firmware_status(ha);
+}
+
+static struct ddb_entry* qla4xxx_get_ddb_entry(struct scsi_qla_host *ha,
+ uint32_t fw_ddb_index)
+{
+ struct dev_db_entry *fw_ddb_entry = NULL;
+ dma_addr_t fw_ddb_entry_dma;
+ struct ddb_entry *ddb_entry = NULL;
+ int found = 0;
+ uint32_t device_state;
+
+ /* Make sure the dma buffer is valid */
+ fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev,
+ sizeof(*fw_ddb_entry),
+ &fw_ddb_entry_dma, GFP_KERNEL);
+ if (fw_ddb_entry == NULL) {
+ DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n",
+ ha->host_no, __func__));
+ return NULL;
+ }
+
+ if (qla4xxx_get_fwddb_entry(ha, fw_ddb_index, fw_ddb_entry,
+ fw_ddb_entry_dma, NULL, NULL,
+ &device_state, NULL, NULL, NULL) ==
+ QLA_ERROR) {
+ DEBUG2(printk("scsi%ld: %s: failed get_ddb_entry for "
+ "fw_ddb_index %d\n", ha->host_no, __func__,
+ fw_ddb_index));
+ return NULL;
+ }
+
+ /* Allocate DDB if not already allocated. */
+ DEBUG2(printk("scsi%ld: %s: Looking for ddb[%d]\n", ha->host_no,
+ __func__, fw_ddb_index));
+ list_for_each_entry(ddb_entry, &ha->ddb_list, list) {
+ if (memcmp(ddb_entry->iscsi_name, fw_ddb_entry->iscsiName,
+ ISCSI_NAME_SIZE) == 0) {
+ found++;
+ break;
+ }
+ }
+
+ if (!found) {
+ DEBUG2(printk("scsi%ld: %s: ddb[%d] not found - allocating "
+ "new ddb\n", ha->host_no, __func__,
+ fw_ddb_index));
+ ddb_entry = qla4xxx_alloc_ddb(ha, fw_ddb_index);
+ }
+
+ /* if not found allocate new ddb */
+ dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), fw_ddb_entry,
+ fw_ddb_entry_dma);
+
+ return ddb_entry;
+}
+
+/**
+ * qla4xxx_update_ddb_entry - update driver's internal ddb
+ * @ha: pointer to host adapter structure.
+ * @ddb_entry: pointer to device database structure to be filled
+ * @fw_ddb_index: index of the ddb entry in fw ddb table
+ *
+ * This routine updates the driver's internal device database entry
+ * with information retrieved from the firmware's device database
+ * entry for the specified device. The ddb_entry->fw_ddb_index field
+ * must be initialized prior to calling this routine
+ *
+ **/
+int qla4xxx_update_ddb_entry(struct scsi_qla_host *ha,
+ struct ddb_entry *ddb_entry,
+ uint32_t fw_ddb_index)
+{
+ struct dev_db_entry *fw_ddb_entry = NULL;
+ dma_addr_t fw_ddb_entry_dma;
+ int status = QLA_ERROR;
+
+ if (ddb_entry == NULL) {
+ DEBUG2(printk("scsi%ld: %s: ddb_entry is NULL\n", ha->host_no,
+ __func__));
+ goto exit_update_ddb;
+ }
+
+ /* Make sure the dma buffer is valid */
+ fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev,
+ sizeof(*fw_ddb_entry),
+ &fw_ddb_entry_dma, GFP_KERNEL);
+ if (fw_ddb_entry == NULL) {
+ DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n",
+ ha->host_no, __func__));
+
+ goto exit_update_ddb;
+ }
+
+ if (qla4xxx_get_fwddb_entry(ha, fw_ddb_index, fw_ddb_entry,
+ fw_ddb_entry_dma, NULL, NULL,
+ &ddb_entry->fw_ddb_device_state, NULL,
+ &ddb_entry->tcp_source_port_num,
+ &ddb_entry->connection_id) ==
+ QLA_ERROR) {
+ DEBUG2(printk("scsi%ld: %s: failed get_ddb_entry for "
+ "fw_ddb_index %d\n", ha->host_no, __func__,
+ fw_ddb_index));
+
+ goto exit_update_ddb;
+ }
+
+ status = QLA_SUCCESS;
+ ddb_entry->target_session_id = le16_to_cpu(fw_ddb_entry->TSID);
+ ddb_entry->task_mgmt_timeout =
+ le16_to_cpu(fw_ddb_entry->taskMngmntTimeout);
+ ddb_entry->CmdSn = 0;
+ ddb_entry->exe_throttle = le16_to_cpu(fw_ddb_entry->exeThrottle);
+ ddb_entry->default_relogin_timeout =
+ le16_to_cpu(fw_ddb_entry->taskMngmntTimeout);
+ ddb_entry->default_time2wait = le16_to_cpu(fw_ddb_entry->minTime2Wait);
+
+ /* Update index in case it changed */
+ ddb_entry->fw_ddb_index = fw_ddb_index;
+ ha->fw_ddb_index_map[fw_ddb_index] = ddb_entry;
+
+ ddb_entry->port = le16_to_cpu(fw_ddb_entry->portNumber);
+ ddb_entry->tpgt = le32_to_cpu(fw_ddb_entry->TargetPortalGroup);
+ memcpy(&ddb_entry->iscsi_name[0], &fw_ddb_entry->iscsiName[0],
+ min(sizeof(ddb_entry->iscsi_name),
+ sizeof(fw_ddb_entry->iscsiName)));
+ memcpy(&ddb_entry->ip_addr[0], &fw_ddb_entry->ipAddr[0],
+ min(sizeof(ddb_entry->ip_addr), sizeof(fw_ddb_entry->ipAddr)));
+
+ DEBUG2(printk("scsi%ld: %s: ddb[%d] - State= %x status= %d.\n",
+ ha->host_no, __func__, fw_ddb_index,
+ ddb_entry->fw_ddb_device_state, status));
+
+ exit_update_ddb:
+ if (fw_ddb_entry)
+ dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
+ fw_ddb_entry, fw_ddb_entry_dma);
+
+ return status;
+}
+
+/**
+ * qla4xxx_alloc_ddb - allocate device database entry
+ * @ha: Pointer to host adapter structure.
+ * @fw_ddb_index: Firmware's device database index
+ *
+ * This routine allocates a ddb_entry, ititializes some values, and
+ * inserts it into the ddb list.
+ **/
+struct ddb_entry * qla4xxx_alloc_ddb(struct scsi_qla_host *ha,
+ uint32_t fw_ddb_index)
+{
+ struct ddb_entry *ddb_entry;
+
+ DEBUG2(printk("scsi%ld: %s: fw_ddb_index [%d]\n", ha->host_no,
+ __func__, fw_ddb_index));
+
+ ddb_entry = qla4xxx_alloc_sess(ha);
+ if (ddb_entry == NULL) {
+ DEBUG2(printk("scsi%ld: %s: Unable to allocate memory "
+ "to add fw_ddb_index [%d]\n",
+ ha->host_no, __func__, fw_ddb_index));
+ return ddb_entry;
+ }
+
+ ddb_entry->fw_ddb_index = fw_ddb_index;
+ atomic_set(&ddb_entry->port_down_timer, ha->port_down_retry_count);
+ atomic_set(&ddb_entry->retry_relogin_timer, INVALID_ENTRY);
+ atomic_set(&ddb_entry->relogin_timer, 0);
+ atomic_set(&ddb_entry->relogin_retry_count, 0);
+ atomic_set(&ddb_entry->state, DDB_STATE_ONLINE);
+ list_add_tail(&ddb_entry->list, &ha->ddb_list);
+ ha->fw_ddb_index_map[fw_ddb_index] = ddb_entry;
+ ha->tot_ddbs++;
+
+ return ddb_entry;
+}
+
+/**
+ * qla4xxx_configure_ddbs - builds driver ddb list
+ * @ha: Pointer to host adapter structure.
+ *
+ * This routine searches for all valid firmware ddb entries and builds
+ * an internal ddb list. Ddbs that are considered valid are those with
+ * a device state of SESSION_ACTIVE.
+ **/
+static int qla4xxx_build_ddb_list(struct scsi_qla_host *ha)
+{
+ int status = QLA_SUCCESS;
+ uint32_t fw_ddb_index = 0;
+ uint32_t next_fw_ddb_index = 0;
+ uint32_t ddb_state;
+ uint32_t conn_err, err_code;
+ struct ddb_entry *ddb_entry;
+
+ dev_info(&ha->pdev->dev, "Initializing DDBs ...\n");
+ for (fw_ddb_index = 0; fw_ddb_index < MAX_DDB_ENTRIES;
+ fw_ddb_index = next_fw_ddb_index) {
+ /* First, let's see if a device exists here */
+ if (qla4xxx_get_fwddb_entry(ha, fw_ddb_index, NULL, 0, NULL,
+ &next_fw_ddb_index, &ddb_state,
+ &conn_err, NULL, NULL) ==
+ QLA_ERROR) {
+ DEBUG2(printk("scsi%ld: %s: get_ddb_entry, "
+ "fw_ddb_index %d failed", ha->host_no,
+ __func__, fw_ddb_index));
+ return QLA_ERROR;
+ }
+
+ DEBUG2(printk("scsi%ld: %s: Getting DDB[%d] ddbstate=0x%x, "
+ "next_fw_ddb_index=%d.\n", ha->host_no, __func__,
+ fw_ddb_index, ddb_state, next_fw_ddb_index));
+
+ /* Issue relogin, if necessary. */
+ if (ddb_state == DDB_DS_SESSION_FAILED ||
+ ddb_state == DDB_DS_NO_CONNECTION_ACTIVE) {
+ /* Try and login to device */
+ DEBUG2(printk("scsi%ld: %s: Login to DDB[%d]\n",
+ ha->host_no, __func__, fw_ddb_index));
+ err_code = ((conn_err & 0x00ff0000) >> 16);
+ if (err_code == 0x1c || err_code == 0x06) {
+ DEBUG2(printk("scsi%ld: %s send target "
+ "completed "
+ "or access denied failure\n",
+ ha->host_no, __func__));
+ } else
+ qla4xxx_set_ddb_entry(ha, fw_ddb_index, 0);
+ }
+
+ if (ddb_state != DDB_DS_SESSION_ACTIVE)
+ goto next_one;
+ /*
+ * if fw_ddb with session active state found,
+ * add to ddb_list
+ */
+ DEBUG2(printk("scsi%ld: %s: DDB[%d] added to list\n",
+ ha->host_no, __func__, fw_ddb_index));
+
+ /* Add DDB to internal our ddb list. */
+ ddb_entry = qla4xxx_get_ddb_entry(ha, fw_ddb_index);
+ if (ddb_entry == NULL) {
+ DEBUG2(printk("scsi%ld: %s: Unable to allocate memory "
+ "for device at fw_ddb_index %d\n",
+ ha->host_no, __func__, fw_ddb_index));
+ return QLA_ERROR;
+ }
+ /* Fill in the device structure */
+ if (qla4xxx_update_ddb_entry(ha, ddb_entry, fw_ddb_index) ==
+ QLA_ERROR) {
+ ha->fw_ddb_index_map[fw_ddb_index] =
+ (struct ddb_entry *)INVALID_ENTRY;
+
+
+ DEBUG2(printk("scsi%ld: %s: update_ddb_entry failed "
+ "for fw_ddb_index %d.\n",
+ ha->host_no, __func__, fw_ddb_index));
+ return QLA_ERROR;
+ }
+
+next_one:
+ /* We know we've reached the last device when
+ * next_fw_ddb_index is 0 */
+ if (next_fw_ddb_index == 0)
+ break;
+ }
+
+ dev_info(&ha->pdev->dev, "DDB list done..\n");
+
+ return status;
+}
+
+struct qla4_relog_scan {
+ int halt_wait;
+ uint32_t conn_err;
+ uint32_t err_code;
+ uint32_t fw_ddb_index;
+ uint32_t next_fw_ddb_index;
+ uint32_t fw_ddb_device_state;
+};
+
+static int qla4_test_rdy(struct scsi_qla_host *ha, struct qla4_relog_scan *rs)
+{
+ struct ddb_entry *ddb_entry;
+
+ /*
+ * Don't want to do a relogin if connection
+ * error is 0x1c.
+ */
+ rs->err_code = ((rs->conn_err & 0x00ff0000) >> 16);
+ if (rs->err_code == 0x1c || rs->err_code == 0x06) {
+ DEBUG2(printk(
+ "scsi%ld: %s send target"
+ " completed or "
+ "access denied failure\n",
+ ha->host_no, __func__));
+ } else {
+ /* We either have a device that is in
+ * the process of relogging in or a
+ * device that is waiting to be
+ * relogged in */
+ rs->halt_wait = 0;
+
+ ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha,
+ rs->fw_ddb_index);
+ if (ddb_entry == NULL)
+ return QLA_ERROR;
+
+ if (ddb_entry->dev_scan_wait_to_start_relogin != 0
+ && time_after_eq(jiffies,
+ ddb_entry->
+ dev_scan_wait_to_start_relogin))
+ {
+ ddb_entry->dev_scan_wait_to_start_relogin = 0;
+ qla4xxx_set_ddb_entry(ha, rs->fw_ddb_index, 0);
+ }
+ }
+ return QLA_SUCCESS;
+}
+
+static int qla4_scan_for_relogin(struct scsi_qla_host *ha,
+ struct qla4_relog_scan *rs)
+{
+ int error;
+
+ /* scan for relogins
+ * ----------------- */
+ for (rs->fw_ddb_index = 0; rs->fw_ddb_index < MAX_DDB_ENTRIES;
+ rs->fw_ddb_index = rs->next_fw_ddb_index) {
+ if (qla4xxx_get_fwddb_entry(ha, rs->fw_ddb_index, NULL, 0,
+ NULL, &rs->next_fw_ddb_index,
+ &rs->fw_ddb_device_state,
+ &rs->conn_err, NULL, NULL)
+ == QLA_ERROR)
+ return QLA_ERROR;
+
+ if (rs->fw_ddb_device_state == DDB_DS_LOGIN_IN_PROCESS)
+ rs->halt_wait = 0;
+
+ if (rs->fw_ddb_device_state == DDB_DS_SESSION_FAILED ||
+ rs->fw_ddb_device_state == DDB_DS_NO_CONNECTION_ACTIVE) {
+ error = qla4_test_rdy(ha, rs);
+ if (error)
+ return error;
+ }
+
+ /* We know we've reached the last device when
+ * next_fw_ddb_index is 0 */
+ if (rs->next_fw_ddb_index == 0)
+ break;
+ }
+ return QLA_SUCCESS;
+}
+
+/**
+ * qla4xxx_devices_ready - wait for target devices to be logged in
+ * @ha: pointer to adapter structure
+ *
+ * This routine waits up to ql4xdiscoverywait seconds
+ * F/W database during driver load time.
+ **/
+static int qla4xxx_devices_ready(struct scsi_qla_host *ha)
+{
+ int error;
+ unsigned long discovery_wtime;
+ struct qla4_relog_scan rs;
+
+ discovery_wtime = jiffies + (ql4xdiscoverywait * HZ);
+
+ DEBUG(printk("Waiting (%d) for devices ...\n", ql4xdiscoverywait));
+ do {
+ /* poll for AEN. */
+ qla4xxx_get_firmware_state(ha);
+ if (test_and_clear_bit(DPC_AEN, &ha->dpc_flags)) {
+ /* Set time-between-relogin timer */
+ qla4xxx_process_aen(ha, RELOGIN_DDB_CHANGED_AENS);
+ }
+
+ /* if no relogins active or needed, halt discvery wait */
+ rs.halt_wait = 1;
+
+ error = qla4_scan_for_relogin(ha, &rs);
+
+ if (rs.halt_wait) {
+ DEBUG2(printk("scsi%ld: %s: Delay halted. Devices "
+ "Ready.\n", ha->host_no, __func__));
+ return QLA_SUCCESS;
+ }
+
+ msleep(2000);
+ } while (!time_after_eq(jiffies, discovery_wtime));
+
+ DEBUG3(qla4xxx_get_conn_event_log(ha));
+
+ return QLA_SUCCESS;
+}
+
+static void qla4xxx_flush_AENS(struct scsi_qla_host *ha)
+{
+ unsigned long wtime;
+
+ /* Flush the 0x8014 AEN from the firmware as a result of
+ * Auto connect. We are basically doing get_firmware_ddb()
+ * to determine whether we need to log back in or not.
+ * Trying to do a set ddb before we have processed 0x8014
+ * will result in another set_ddb() for the same ddb. In other
+ * words there will be stale entries in the aen_q.
+ */
+ wtime = jiffies + (2 * HZ);
+ do {
+ if (qla4xxx_get_firmware_state(ha) == QLA_SUCCESS)
+ if (ha->firmware_state & (BIT_2 | BIT_0))
+ return;
+
+ if (test_and_clear_bit(DPC_AEN, &ha->dpc_flags))
+ qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
+
+ msleep(1000);
+ } while (!time_after_eq(jiffies, wtime));
+
+}
+
+static int qla4xxx_initialize_ddb_list(struct scsi_qla_host *ha)
+{
+ uint16_t fw_ddb_index;
+ int status = QLA_SUCCESS;
+
+ /* free the ddb list if is not empty */
+ if (!list_empty(&ha->ddb_list))
+ qla4xxx_free_ddb_list(ha);
+
+ for (fw_ddb_index = 0; fw_ddb_index < MAX_DDB_ENTRIES; fw_ddb_index++)
+ ha->fw_ddb_index_map[fw_ddb_index] =
+ (struct ddb_entry *)INVALID_ENTRY;
+
+ ha->tot_ddbs = 0;
+
+ qla4xxx_flush_AENS(ha);
+
+ /*
+ * First perform device discovery for active
+ * fw ddb indexes and build
+ * ddb list.
+ */
+ if ((status = qla4xxx_build_ddb_list(ha)) == QLA_ERROR)
+ return status;
+
+ /* Wait for an AEN */
+ qla4xxx_devices_ready(ha);
+
+ /*
+ * Targets can come online after the inital discovery, so processing
+ * the aens here will catch them.
+ */
+ if (test_and_clear_bit(DPC_AEN, &ha->dpc_flags))
+ qla4xxx_process_aen(ha, PROCESS_ALL_AENS);
+
+ return status;
+}
+
+/**
+ * qla4xxx_update_ddb_list - update the driver ddb list
+ * @ha: pointer to host adapter structure.
+ *
+ * This routine obtains device information from the F/W database after
+ * firmware or adapter resets. The device table is preserved.
+ **/
+int qla4xxx_reinitialize_ddb_list(struct scsi_qla_host *ha)
+{
+ int status = QLA_SUCCESS;
+ struct ddb_entry *ddb_entry, *detemp;
+
+ /* Update the device information for all devices. */
+ list_for_each_entry_safe(ddb_entry, detemp, &ha->ddb_list, list) {
+ qla4xxx_update_ddb_entry(ha, ddb_entry,
+ ddb_entry->fw_ddb_index);
+ if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE) {
+ atomic_set(&ddb_entry->state, DDB_STATE_ONLINE);
+ DEBUG2(printk ("scsi%ld: %s: ddb index [%d] marked "
+ "ONLINE\n", ha->host_no, __func__,
+ ddb_entry->fw_ddb_index));
+ } else if (atomic_read(&ddb_entry->state) == DDB_STATE_ONLINE)
+ qla4xxx_mark_device_missing(ha, ddb_entry);
+ }
+ return status;
+}
+
+/**
+ * qla4xxx_relogin_device - re-establish session
+ * @ha: Pointer to host adapter structure.
+ * @ddb_entry: Pointer to device database entry
+ *
+ * This routine does a session relogin with the specified device.
+ * The ddb entry must be assigned prior to making this call.
+ **/
+int qla4xxx_relogin_device(struct scsi_qla_host *ha,
+ struct ddb_entry * ddb_entry)
+{
+ uint16_t relogin_timer;
+
+ relogin_timer = max(ddb_entry->default_relogin_timeout,
+ (uint16_t)RELOGIN_TOV);
+ atomic_set(&ddb_entry->relogin_timer, relogin_timer);
+
+ DEBUG2(printk("scsi%ld: Relogin index [%d]. TOV=%d\n", ha->host_no,
+ ddb_entry->fw_ddb_index, relogin_timer));
+
+ qla4xxx_set_ddb_entry(ha, ddb_entry->fw_ddb_index, 0);
+
+ return QLA_SUCCESS;
+}
+
+static int qla4xxx_config_nvram(struct scsi_qla_host *ha)
+{
+ unsigned long flags;
+ union external_hw_config_reg extHwConfig;
+
+ DEBUG2(printk("scsi%ld: %s: Get EEProm parameters \n", ha->host_no,
+ __func__));
+ if (ql4xxx_lock_flash(ha) != QLA_SUCCESS)
+ return (QLA_ERROR);
+ if (ql4xxx_lock_nvram(ha) != QLA_SUCCESS) {
+ ql4xxx_unlock_flash(ha);
+ return (QLA_ERROR);
+ }
+
+ /* Get EEPRom Parameters from NVRAM and validate */
+ dev_info(&ha->pdev->dev, "Configuring NVRAM ...\n");
+ if (qla4xxx_is_nvram_configuration_valid(ha) == QLA_SUCCESS) {
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ extHwConfig.Asuint32_t =
+ rd_nvram_word(ha, eeprom_ext_hw_conf_offset(ha));
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+ } else {
+ /*
+ * QLogic adapters should always have a valid NVRAM.
+ * If not valid, do not load.
+ */
+ dev_warn(&ha->pdev->dev,
+ "scsi%ld: %s: EEProm checksum invalid. "
+ "Please update your EEPROM\n", ha->host_no,
+ __func__);
+
+ /* set defaults */
+ if (is_qla4010(ha))
+ extHwConfig.Asuint32_t = 0x1912;
+ else if (is_qla4022(ha) | is_qla4032(ha))
+ extHwConfig.Asuint32_t = 0x0023;
+ }
+ DEBUG(printk("scsi%ld: %s: Setting extHwConfig to 0xFFFF%04x\n",
+ ha->host_no, __func__, extHwConfig.Asuint32_t));
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ writel((0xFFFF << 16) | extHwConfig.Asuint32_t, isp_ext_hw_conf(ha));
+ readl(isp_ext_hw_conf(ha));
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+ ql4xxx_unlock_nvram(ha);
+ ql4xxx_unlock_flash(ha);
+
+ return (QLA_SUCCESS);
+}
+
+static void qla4x00_pci_config(struct scsi_qla_host *ha)
+{
+ uint16_t w, mwi;
+
+ dev_info(&ha->pdev->dev, "Configuring PCI space...\n");
+
+ pci_set_master(ha->pdev);
+ mwi = 0;
+ if (pci_set_mwi(ha->pdev))
+ mwi = PCI_COMMAND_INVALIDATE;
+ /*
+ * We want to respect framework's setting of PCI configuration space
+ * command register and also want to make sure that all bits of
+ * interest to us are properly set in command register.
+ */
+ pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
+ w |= mwi | (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
+ w &= ~PCI_COMMAND_INTX_DISABLE;
+ pci_write_config_word(ha->pdev, PCI_COMMAND, w);
+}
+
+static int qla4xxx_start_firmware_from_flash(struct scsi_qla_host *ha)
+{
+ int status = QLA_ERROR;
+ uint32_t max_wait_time;
+ unsigned long flags;
+ uint32_t mbox_status;
+
+ dev_info(&ha->pdev->dev, "Starting firmware ...\n");
+
+ /*
+ * Start firmware from flash ROM
+ *
+ * WORKAROUND: Stuff a non-constant value that the firmware can
+ * use as a seed for a random number generator in MB7 prior to
+ * setting BOOT_ENABLE. Fixes problem where the TCP
+ * connections use the same TCP ports after each reboot,
+ * causing some connections to not get re-established.
+ */
+ DEBUG(printk("scsi%d: %s: Start firmware from flash ROM\n",
+ ha->host_no, __func__));
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ writel(jiffies, &ha->reg->mailbox[7]);
+ if (is_qla4022(ha) | is_qla4032(ha))
+ writel(set_rmask(NVR_WRITE_ENABLE),
+ &ha->reg->u1.isp4022.nvram);
+
+ writel(set_rmask(CSR_BOOT_ENABLE), &ha->reg->ctrl_status);
+ readl(&ha->reg->ctrl_status);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+ /* Wait for firmware to come UP. */
+ max_wait_time = FIRMWARE_UP_TOV * 4;
+ do {
+ uint32_t ctrl_status;
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ ctrl_status = readw(&ha->reg->ctrl_status);
+ mbox_status = readw(&ha->reg->mailbox[0]);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+ if (ctrl_status & set_rmask(CSR_SCSI_PROCESSOR_INTR))
+ break;
+ if (mbox_status == MBOX_STS_COMMAND_COMPLETE)
+ break;
+
+ DEBUG2(printk("scsi%ld: %s: Waiting for boot firmware to "
+ "complete... ctrl_sts=0x%x, remaining=%d\n",
+ ha->host_no, __func__, ctrl_status,
+ max_wait_time));
+
+ msleep(250);
+ } while ((max_wait_time--));
+
+ if (mbox_status == MBOX_STS_COMMAND_COMPLETE) {
+ DEBUG(printk("scsi%ld: %s: Firmware has started\n",
+ ha->host_no, __func__));
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ writel(set_rmask(CSR_SCSI_PROCESSOR_INTR),
+ &ha->reg->ctrl_status);
+ readl(&ha->reg->ctrl_status);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+ status = QLA_SUCCESS;
+ } else {
+ printk(KERN_INFO "scsi%ld: %s: Boot firmware failed "
+ "- mbox status 0x%x\n", ha->host_no, __func__,
+ mbox_status);
+ status = QLA_ERROR;
+ }
+ return status;
+}
+
+int ql4xxx_lock_drvr_wait(struct scsi_qla_host *ha)
+{
+#define QL4_LOCK_DRVR_WAIT 30
+#define QL4_LOCK_DRVR_SLEEP 1
+
+ int drvr_wait = QL4_LOCK_DRVR_WAIT;
+ while (drvr_wait) {
+ if (ql4xxx_lock_drvr(ha) == 0) {
+ ssleep(QL4_LOCK_DRVR_SLEEP);
+ if (drvr_wait) {
+ DEBUG2(printk("scsi%ld: %s: Waiting for "
+ "Global Init Semaphore(%d)...n",
+ ha->host_no,
+ __func__, drvr_wait));
+ }
+ drvr_wait -= QL4_LOCK_DRVR_SLEEP;
+ } else {
+ DEBUG2(printk("scsi%ld: %s: Global Init Semaphore "
+ "acquired.n", ha->host_no, __func__));
+ return QLA_SUCCESS;
+ }
+ }
+ return QLA_ERROR;
+}
+
+/**
+ * qla4xxx_start_firmware - starts qla4xxx firmware
+ * @ha: Pointer to host adapter structure.
+ *
+ * This routine performs the neccessary steps to start the firmware for
+ * the QLA4010 adapter.
+ **/
+static int qla4xxx_start_firmware(struct scsi_qla_host *ha)
+{
+ unsigned long flags = 0;
+ uint32_t mbox_status;
+ int status = QLA_ERROR;
+ int soft_reset = 1;
+ int config_chip = 0;
+
+ if (is_qla4022(ha) | is_qla4032(ha))
+ ql4xxx_set_mac_number(ha);
+
+ if (ql4xxx_lock_drvr_wait(ha) != QLA_SUCCESS)
+ return QLA_ERROR;
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+
+ DEBUG2(printk("scsi%ld: %s: port_ctrl = 0x%08X\n", ha->host_no,
+ __func__, readw(isp_port_ctrl(ha))));
+ DEBUG(printk("scsi%ld: %s: port_status = 0x%08X\n", ha->host_no,
+ __func__, readw(isp_port_status(ha))));
+
+ /* Is Hardware already initialized? */
+ if ((readw(isp_port_ctrl(ha)) & 0x8000) != 0) {
+ DEBUG(printk("scsi%ld: %s: Hardware has already been "
+ "initialized\n", ha->host_no, __func__));
+
+ /* Receive firmware boot acknowledgement */
+ mbox_status = readw(&ha->reg->mailbox[0]);
+
+ DEBUG2(printk("scsi%ld: %s: H/W Config complete - mbox[0]= "
+ "0x%x\n", ha->host_no, __func__, mbox_status));
+
+ /* Is firmware already booted? */
+ if (mbox_status == 0) {
+ /* F/W not running, must be config by net driver */
+ config_chip = 1;
+ soft_reset = 0;
+ } else {
+ writel(set_rmask(CSR_SCSI_PROCESSOR_INTR),
+ &ha->reg->ctrl_status);
+ readl(&ha->reg->ctrl_status);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+ if (qla4xxx_get_firmware_state(ha) == QLA_SUCCESS) {
+ DEBUG2(printk("scsi%ld: %s: Get firmware "
+ "state -- state = 0x%x\n",
+ ha->host_no,
+ __func__, ha->firmware_state));
+ /* F/W is running */
+ if (ha->firmware_state &
+ FW_STATE_CONFIG_WAIT) {
+ DEBUG2(printk("scsi%ld: %s: Firmware "
+ "in known state -- "
+ "config and "
+ "boot, state = 0x%x\n",
+ ha->host_no, __func__,
+ ha->firmware_state));
+ config_chip = 1;
+ soft_reset = 0;
+ }
+ } else {
+ DEBUG2(printk("scsi%ld: %s: Firmware in "
+ "unknown state -- resetting,"
+ " state = "
+ "0x%x\n", ha->host_no, __func__,
+ ha->firmware_state));
+ }
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ }
+ } else {
+ DEBUG(printk("scsi%ld: %s: H/W initialization hasn't been "
+ "started - resetting\n", ha->host_no, __func__));
+ }
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+ DEBUG(printk("scsi%ld: %s: Flags soft_rest=%d, config= %d\n ",
+ ha->host_no, __func__, soft_reset, config_chip));
+ if (soft_reset) {
+ DEBUG(printk("scsi%ld: %s: Issue Soft Reset\n", ha->host_no,
+ __func__));
+ status = qla4xxx_soft_reset(ha);
+ if (status == QLA_ERROR) {
+ DEBUG(printk("scsi%d: %s: Soft Reset failed!\n",
+ ha->host_no, __func__));
+ ql4xxx_unlock_drvr(ha);
+ return QLA_ERROR;
+ }
+ config_chip = 1;
+
+ /* Reset clears the semaphore, so aquire again */
+ if (ql4xxx_lock_drvr_wait(ha) != QLA_SUCCESS)
+ return QLA_ERROR;
+ }
+
+ if (config_chip) {
+ if ((status = qla4xxx_config_nvram(ha)) == QLA_SUCCESS)
+ status = qla4xxx_start_firmware_from_flash(ha);
+ }
+
+ ql4xxx_unlock_drvr(ha);
+ if (status == QLA_SUCCESS) {
+ qla4xxx_get_fw_version(ha);
+ if (test_and_clear_bit(AF_GET_CRASH_RECORD, &ha->flags))
+ qla4xxx_get_crash_record(ha);
+ } else {
+ DEBUG(printk("scsi%ld: %s: Firmware has NOT started\n",
+ ha->host_no, __func__));
+ }
+ return status;
+}
+
+
+/**
+ * qla4xxx_initialize_adapter - initiailizes hba
+ * @ha: Pointer to host adapter structure.
+ * @renew_ddb_list: Indicates what to do with the adapter's ddb list
+ * after adapter recovery has completed.
+ * 0=preserve ddb list, 1=destroy and rebuild ddb list
+ *
+ * This routine parforms all of the steps necessary to initialize the adapter.
+ *
+ **/
+int qla4xxx_initialize_adapter(struct scsi_qla_host *ha,
+ uint8_t renew_ddb_list)
+{
+ int status = QLA_ERROR;
+ int8_t ip_address[IP_ADDR_LEN] = {0} ;
+
+ ha->eeprom_cmd_data = 0;
+
+ qla4x00_pci_config(ha);
+
+ qla4xxx_disable_intrs(ha);
+
+ /* Initialize the Host adapter request/response queues and firmware */
+ if (qla4xxx_start_firmware(ha) == QLA_ERROR)
+ return status;
+
+ if (qla4xxx_validate_mac_address(ha) == QLA_ERROR)
+ return status;
+
+ if (qla4xxx_init_local_data(ha) == QLA_ERROR)
+ return status;
+
+ status = qla4xxx_init_firmware(ha);
+ if (status == QLA_ERROR)
+ return status;
+
+ /*
+ * FW is waiting to get an IP address from DHCP server: Skip building
+ * the ddb_list and wait for DHCP lease acquired aen to come in
+ * followed by 0x8014 aen" to trigger the tgt discovery process.
+ */
+ if (ha->firmware_state & FW_STATE_DHCP_IN_PROGRESS)
+ return status;
+
+ /* Skip device discovery if ip and subnet is zero */
+ if (memcmp(ha->ip_address, ip_address, IP_ADDR_LEN) == 0 ||
+ memcmp(ha->subnet_mask, ip_address, IP_ADDR_LEN) == 0)
+ return status;
+
+ if (renew_ddb_list == PRESERVE_DDB_LIST) {
+ /*
+ * We want to preserve lun states (i.e. suspended, etc.)
+ * for recovery initiated by the driver. So just update
+ * the device states for the existing ddb_list.
+ */
+ qla4xxx_reinitialize_ddb_list(ha);
+ } else if (renew_ddb_list == REBUILD_DDB_LIST) {
+ /*
+ * We want to build the ddb_list from scratch during
+ * driver initialization and recovery initiated by the
+ * INT_HBA_RESET IOCTL.
+ */
+ status = qla4xxx_initialize_ddb_list(ha);
+ if (status == QLA_ERROR) {
+ DEBUG2(printk("%s(%ld) Error occurred during build"
+ "ddb list\n", __func__, ha->host_no));
+ goto exit_init_hba;
+ }
+
+ }
+ if (!ha->tot_ddbs) {
+ DEBUG2(printk("scsi%ld: Failed to initialize devices or none "
+ "present in Firmware device database\n",
+ ha->host_no));
+ }
+
+ exit_init_hba:
+ return status;
+
+}
+
+/**
+ * qla4xxx_add_device_dynamically - ddb addition due to an AEN
+ * @ha: Pointer to host adapter structure.
+ * @fw_ddb_index: Firmware's device database index
+ *
+ * This routine processes adds a device as a result of an 8014h AEN.
+ **/
+static void qla4xxx_add_device_dynamically(struct scsi_qla_host *ha,
+ uint32_t fw_ddb_index)
+{
+ struct ddb_entry * ddb_entry;
+
+ /* First allocate a device structure */
+ ddb_entry = qla4xxx_get_ddb_entry(ha, fw_ddb_index);
+ if (ddb_entry == NULL) {
+ DEBUG2(printk(KERN_WARNING
+ "scsi%ld: Unable to allocate memory to add "
+ "fw_ddb_index %d\n", ha->host_no, fw_ddb_index));
+ return;
+ }
+
+ if (qla4xxx_update_ddb_entry(ha, ddb_entry, fw_ddb_index) ==
+ QLA_ERROR) {
+ ha->fw_ddb_index_map[fw_ddb_index] =
+ (struct ddb_entry *)INVALID_ENTRY;
+ DEBUG2(printk(KERN_WARNING
+ "scsi%ld: failed to add new device at index "
+ "[%d]\n Unable to retrieve fw ddb entry\n",
+ ha->host_no, fw_ddb_index));
+ qla4xxx_free_ddb(ha, ddb_entry);
+ return;
+ }
+
+ if (qla4xxx_add_sess(ddb_entry)) {
+ DEBUG2(printk(KERN_WARNING
+ "scsi%ld: failed to add new device at index "
+ "[%d]\n Unable to add connection and session\n",
+ ha->host_no, fw_ddb_index));
+ qla4xxx_free_ddb(ha, ddb_entry);
+ }
+}
+
+/**
+ * qla4xxx_process_ddb_changed - process ddb state change
+ * @ha - Pointer to host adapter structure.
+ * @fw_ddb_index - Firmware's device database index
+ * @state - Device state
+ *
+ * This routine processes a Decive Database Changed AEN Event.
+ **/
+int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha,
+ uint32_t fw_ddb_index, uint32_t state)
+{
+ struct ddb_entry * ddb_entry;
+ uint32_t old_fw_ddb_device_state;
+
+ /* check for out of range index */
+ if (fw_ddb_index >= MAX_DDB_ENTRIES)
+ return QLA_ERROR;
+
+ /* Get the corresponging ddb entry */
+ ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, fw_ddb_index);
+ /* Device does not currently exist in our database. */
+ if (ddb_entry == NULL) {
+ if (state == DDB_DS_SESSION_ACTIVE)
+ qla4xxx_add_device_dynamically(ha, fw_ddb_index);
+ return QLA_SUCCESS;
+ }
+
+ /* Device already exists in our database. */
+ old_fw_ddb_device_state = ddb_entry->fw_ddb_device_state;
+ DEBUG2(printk("scsi%ld: %s DDB - old state= 0x%x, new state=0x%x for "
+ "index [%d]\n", ha->host_no, __func__,
+ ddb_entry->fw_ddb_device_state, state, fw_ddb_index));
+ if (old_fw_ddb_device_state == state &&
+ state == DDB_DS_SESSION_ACTIVE) {
+ /* Do nothing, state not changed. */
+ return QLA_SUCCESS;
+ }
+
+ ddb_entry->fw_ddb_device_state = state;
+ /* Device is back online. */
+ if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE) {
+ atomic_set(&ddb_entry->port_down_timer,
+ ha->port_down_retry_count);
+ atomic_set(&ddb_entry->state, DDB_STATE_ONLINE);
+ atomic_set(&ddb_entry->relogin_retry_count, 0);
+ atomic_set(&ddb_entry->relogin_timer, 0);
+ clear_bit(DF_RELOGIN, &ddb_entry->flags);
+ clear_bit(DF_NO_RELOGIN, &ddb_entry->flags);
+ iscsi_if_create_session_done(ddb_entry->conn);
+ /*
+ * Change the lun state to READY in case the lun TIMEOUT before
+ * the device came back.
+ */
+ } else {
+ /* Device went away, try to relogin. */
+ /* Mark device missing */
+ if (atomic_read(&ddb_entry->state) == DDB_STATE_ONLINE)
+ qla4xxx_mark_device_missing(ha, ddb_entry);
+ /*
+ * Relogin if device state changed to a not active state.
+ * However, do not relogin if this aen is a result of an IOCTL
+ * logout (DF_NO_RELOGIN) or if this is a discovered device.
+ */
+ if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_FAILED &&
+ !test_bit(DF_RELOGIN, &ddb_entry->flags) &&
+ !test_bit(DF_NO_RELOGIN, &ddb_entry->flags) &&
+ !test_bit(DF_ISNS_DISCOVERED, &ddb_entry->flags)) {
+ /*
+ * This triggers a relogin. After the relogin_timer
+ * expires, the relogin gets scheduled. We must wait a
+ * minimum amount of time since receiving an 0x8014 AEN
+ * with failed device_state or a logout response before
+ * we can issue another relogin.
+ */
+ /* Firmware padds this timeout: (time2wait +1).
+ * Driver retry to login should be longer than F/W.
+ * Otherwise F/W will fail
+ * set_ddb() mbx cmd with 0x4005 since it still
+ * counting down its time2wait.
+ */
+ atomic_set(&ddb_entry->relogin_timer, 0);
+ atomic_set(&ddb_entry->retry_relogin_timer,
+ ddb_entry->default_time2wait + 4);
+ }
+ }
+
+ return QLA_SUCCESS;
+}
+
git://git.onelab.eu / linux-2.6.git / blobdiff