-/*----------------------------------------------------------------*/
/*
- Qlogic linux driver - work in progress. No Warranty express or implied.
- Use at your own risk. Support Tort Reform so you won't have to read all
- these silly disclaimers.
-
- Copyright 1994, Tom Zerucha.
- tz@execpc.com
-
- Additional Code, and much appreciated help by
- Michael A. Griffith
- grif@cs.ucr.edu
-
- Thanks to Eric Youngdale and Dave Hinds for loadable module and PCMCIA
- help respectively, and for suffering through my foolishness during the
- debugging process.
-
- Reference Qlogic FAS408 Technical Manual, 53408-510-00A, May 10, 1994
- (you can reference it, but it is incomplete and inaccurate in places)
-
- Version 0.46 1/30/97 - kernel 1.2.0+
-
- Functions as standalone, loadable, and PCMCIA driver, the latter from
- Dave Hinds' PCMCIA package.
-
- Cleaned up 26/10/2002 by Alan Cox <alan@redhat.com> as part of the 2.5
- SCSI driver cleanup and audit. This driver still needs work on the
- following
- - Non terminating hardware waits
- - Some layering violations with its pcmcia stub
-
- Redistributable under terms of the GNU General Public License
-
- For the avoidance of doubt the "preferred form" of this code is one which
- is in an open non patent encumbered format. Where cryptographic key signing
- forms part of the process of creating an executable the information
- including keys needed to generate an equivalently functional executable
- are deemed to be part of the source code.
-
-*/
+ * Qlogic FAS408 ISA card driver
+ *
+ * Copyright 1994, Tom Zerucha.
+ * tz@execpc.com
+ *
+ * Redistributable under terms of the GNU General Public License
+ *
+ * For the avoidance of doubt the "preferred form" of this code is one which
+ * is in an open non patent encumbered format. Where cryptographic key signing
+ * forms part of the process of creating an executable the information
+ * including keys needed to generate an equivalently functional executable
+ * are deemed to be part of the source code.
+ *
+ * Check qlogicfas408.c for more credits and info.
+ */
#include <linux/module.h>
#include <linux/blkdev.h> /* to get disk capacity */
#include "scsi.h"
#include "hosts.h"
-#include "qlogicfas.h"
+#include "qlogicfas408.h"
-/*----------------------------------------------------------------*/
-int qlcfg5 = (XTALFREQ << 5); /* 15625/512 */
-int qlcfg6 = SYNCXFRPD;
-int qlcfg7 = SYNCOFFST;
-int qlcfg8 = (SLOWCABLE << 7) | (QL_ENABLE_PARITY << 4);
-int qlcfg9 = ((XTALFREQ + 4) / 5);
-int qlcfgc = (FASTCLK << 3) | (FASTSCSI << 4);
-
-static char qlogicfas_name[] = "qlogicfas";
-
-int qlogicfas_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *));
-
-/*----------------------------------------------------------------*/
-
-/*----------------------------------------------------------------*/
-/* local functions */
-/*----------------------------------------------------------------*/
-
-/* error recovery - reset everything */
-
-static void ql_zap(qlogicfas_priv_t priv)
-{
- int x;
- int qbase = priv->qbase;
-
- x = inb(qbase + 0xd);
- REG0;
- outb(3, qbase + 3); /* reset SCSI */
- outb(2, qbase + 3); /* reset chip */
- if (x & 0x80)
- REG1;
-}
-
-/*
- * Do a pseudo-dma tranfer
+/* Set the following to 2 to use normal interrupt (active high/totempole-
+ * tristate), otherwise use 0 (REQUIRED FOR PCMCIA) for active low, open
+ * drain
*/
-
-static int ql_pdma(qlogicfas_priv_t priv, int phase, char *request, int reqlen)
-{
- int j;
- int qbase = priv->qbase;
- j = 0;
- if (phase & 1) { /* in */
-#if QL_TURBO_PDMA
- rtrc(4)
- /* empty fifo in large chunks */
- if (reqlen >= 128 && (inb(qbase + 8) & 2)) { /* full */
- insl(qbase + 4, request, 32);
- reqlen -= 128;
- request += 128;
- }
- while (reqlen >= 84 && !(j & 0xc0)) /* 2/3 */
- if ((j = inb(qbase + 8)) & 4)
- {
- insl(qbase + 4, request, 21);
- reqlen -= 84;
- request += 84;
- }
- if (reqlen >= 44 && (inb(qbase + 8) & 8)) { /* 1/3 */
- insl(qbase + 4, request, 11);
- reqlen -= 44;
- request += 44;
- }
-#endif
- /* until both empty and int (or until reclen is 0) */
- rtrc(7)
- j = 0;
- while (reqlen && !((j & 0x10) && (j & 0xc0)))
- {
- /* while bytes to receive and not empty */
- j &= 0xc0;
- while (reqlen && !((j = inb(qbase + 8)) & 0x10))
- {
- *request++ = inb(qbase + 4);
- reqlen--;
- }
- if (j & 0x10)
- j = inb(qbase + 8);
-
- }
- } else { /* out */
-#if QL_TURBO_PDMA
- rtrc(4)
- if (reqlen >= 128 && inb(qbase + 8) & 0x10) { /* empty */
- outsl(qbase + 4, request, 32);
- reqlen -= 128;
- request += 128;
- }
- while (reqlen >= 84 && !(j & 0xc0)) /* 1/3 */
- if (!((j = inb(qbase + 8)) & 8)) {
- outsl(qbase + 4, request, 21);
- reqlen -= 84;
- request += 84;
- }
- if (reqlen >= 40 && !(inb(qbase + 8) & 4)) { /* 2/3 */
- outsl(qbase + 4, request, 10);
- reqlen -= 40;
- request += 40;
- }
-#endif
- /* until full and int (or until reclen is 0) */
- rtrc(7)
- j = 0;
- while (reqlen && !((j & 2) && (j & 0xc0))) {
- /* while bytes to send and not full */
- while (reqlen && !((j = inb(qbase + 8)) & 2))
- {
- outb(*request++, qbase + 4);
- reqlen--;
- }
- if (j & 2)
- j = inb(qbase + 8);
- }
- }
- /* maybe return reqlen */
- return inb(qbase + 8) & 0xc0;
-}
-
-/*
- * Wait for interrupt flag (polled - not real hardware interrupt)
- */
-
-static int ql_wai(qlogicfas_priv_t priv)
-{
- int k;
- int qbase = priv->qbase;
- unsigned long i;
-
- k = 0;
- i = jiffies + WATCHDOG;
- while (time_before(jiffies, i) && !priv->qabort &&
- !((k = inb(qbase + 4)) & 0xe0)) {
- barrier();
- cpu_relax();
- }
- if (time_after_eq(jiffies, i))
- return (DID_TIME_OUT);
- if (priv->qabort)
- return (priv->qabort == 1 ? DID_ABORT : DID_RESET);
- if (k & 0x60)
- ql_zap(priv);
- if (k & 0x20)
- return (DID_PARITY);
- if (k & 0x40)
- return (DID_ERROR);
- return 0;
-}
-
-/*
- * Initiate scsi command - queueing handler
- * caller must hold host lock
- */
-
-static void ql_icmd(Scsi_Cmnd * cmd)
-{
- qlogicfas_priv_t priv = (qlogicfas_priv_t)&(cmd->device->host->hostdata[0]);
- int qbase = priv->qbase;
- unsigned int i;
-
- priv->qabort = 0;
-
- REG0;
- /* clearing of interrupts and the fifo is needed */
-
- inb(qbase + 5); /* clear interrupts */
- if (inb(qbase + 5)) /* if still interrupting */
- outb(2, qbase + 3); /* reset chip */
- else if (inb(qbase + 7) & 0x1f)
- outb(1, qbase + 3); /* clear fifo */
- while (inb(qbase + 5)); /* clear ints */
- REG1;
- outb(1, qbase + 8); /* set for PIO pseudo DMA */
- outb(0, qbase + 0xb); /* disable ints */
- inb(qbase + 8); /* clear int bits */
- REG0;
- outb(0x40, qbase + 0xb); /* enable features */
-
- /* configurables */
- outb(qlcfgc, qbase + 0xc);
- /* config: no reset interrupt, (initiator) bus id */
- outb(0x40 | qlcfg8 | priv->qinitid, qbase + 8);
- outb(qlcfg7, qbase + 7);
- outb(qlcfg6, qbase + 6);
- /**/ outb(qlcfg5, qbase + 5); /* select timer */
- outb(qlcfg9 & 7, qbase + 9); /* prescaler */
-/* outb(0x99, qbase + 5); */
- outb(cmd->device->id, qbase + 4);
-
- for (i = 0; i < cmd->cmd_len; i++)
- outb(cmd->cmnd[i], qbase + 2);
-
- priv->qlcmd = cmd;
- outb(0x41, qbase + 3); /* select and send command */
-}
-
-/*
- * Process scsi command - usually after interrupt
- */
-
-static unsigned int ql_pcmd(Scsi_Cmnd * cmd)
-{
- unsigned int i, j;
- unsigned long k;
- unsigned int result; /* ultimate return result */
- unsigned int status; /* scsi returned status */
- unsigned int message; /* scsi returned message */
- unsigned int phase; /* recorded scsi phase */
- unsigned int reqlen; /* total length of transfer */
- struct scatterlist *sglist; /* scatter-gather list pointer */
- unsigned int sgcount; /* sg counter */
- char *buf;
- qlogicfas_priv_t priv = (qlogicfas_priv_t)&(cmd->device->host->hostdata[0]);
- int qbase = priv->qbase;
-
- rtrc(1)
- j = inb(qbase + 6);
- i = inb(qbase + 5);
- if (i == 0x20) {
- return (DID_NO_CONNECT << 16);
- }
- i |= inb(qbase + 5); /* the 0x10 bit can be set after the 0x08 */
- if (i != 0x18) {
- printk(KERN_ERR "Ql:Bad Interrupt status:%02x\n", i);
- ql_zap(priv);
- return (DID_BAD_INTR << 16);
- }
- j &= 7; /* j = inb( qbase + 7 ) >> 5; */
-
- /* correct status is supposed to be step 4 */
- /* it sometimes returns step 3 but with 0 bytes left to send */
- /* We can try stuffing the FIFO with the max each time, but we will get a
- sequence of 3 if any bytes are left (but we do flush the FIFO anyway */
-
- if (j != 3 && j != 4) {
- printk(KERN_ERR "Ql:Bad sequence for command %d, int %02X, cmdleft = %d\n",
- j, i, inb(qbase + 7) & 0x1f);
- ql_zap(priv);
- return (DID_ERROR << 16);
- }
- result = DID_OK;
- if (inb(qbase + 7) & 0x1f) /* if some bytes in fifo */
- outb(1, qbase + 3); /* clear fifo */
- /* note that request_bufflen is the total xfer size when sg is used */
- reqlen = cmd->request_bufflen;
- /* note that it won't work if transfers > 16M are requested */
- if (reqlen && !((phase = inb(qbase + 4)) & 6)) { /* data phase */
- rtrc(2)
- outb(reqlen, qbase); /* low-mid xfer cnt */
- outb(reqlen >> 8, qbase + 1); /* low-mid xfer cnt */
- outb(reqlen >> 16, qbase + 0xe); /* high xfer cnt */
- outb(0x90, qbase + 3); /* command do xfer */
- /* PIO pseudo DMA to buffer or sglist */
- REG1;
- if (!cmd->use_sg)
- ql_pdma(priv, phase, cmd->request_buffer,
- cmd->request_bufflen);
- else {
- sgcount = cmd->use_sg;
- sglist = cmd->request_buffer;
- while (sgcount--) {
- if (priv->qabort) {
- REG0;
- return ((priv->qabort == 1 ?
- DID_ABORT : DID_RESET) << 16);
- }
- buf = page_address(sglist->page) + sglist->offset;
- if (ql_pdma(priv, phase, buf, sglist->length))
- break;
- sglist++;
- }
- }
- REG0;
- rtrc(2)
- /*
- * Wait for irq (split into second state of irq handler
- * if this can take time)
- */
- if ((k = ql_wai(priv)))
- return (k << 16);
- k = inb(qbase + 5); /* should be 0x10, bus service */
- }
-
- /*
- * Enter Status (and Message In) Phase
- */
-
- k = jiffies + WATCHDOG;
-
- while (time_before(jiffies, k) && !priv->qabort &&
- !(inb(qbase + 4) & 6))
- cpu_relax(); /* wait for status phase */
-
- if (time_after_eq(jiffies, k)) {
- ql_zap(priv);
- return (DID_TIME_OUT << 16);
- }
-
- /* FIXME: timeout ?? */
- while (inb(qbase + 5))
- cpu_relax(); /* clear pending ints */
-
- if (priv->qabort)
- return ((priv->qabort == 1 ? DID_ABORT : DID_RESET) << 16);
-
- outb(0x11, qbase + 3); /* get status and message */
- if ((k = ql_wai(priv)))
- return (k << 16);
- i = inb(qbase + 5); /* get chip irq stat */
- j = inb(qbase + 7) & 0x1f; /* and bytes rec'd */
- status = inb(qbase + 2);
- message = inb(qbase + 2);
-
- /*
- * Should get function complete int if Status and message, else
- * bus serv if only status
- */
- if (!((i == 8 && j == 2) || (i == 0x10 && j == 1))) {
- printk(KERN_ERR "Ql:Error during status phase, int=%02X, %d bytes recd\n", i, j);
- result = DID_ERROR;
- }
- outb(0x12, qbase + 3); /* done, disconnect */
- rtrc(1)
- if ((k = ql_wai(priv)))
- return (k << 16);
-
- /*
- * Should get bus service interrupt and disconnect interrupt
- */
-
- i = inb(qbase + 5); /* should be bus service */
- while (!priv->qabort && ((i & 0x20) != 0x20)) {
- barrier();
- cpu_relax();
- i |= inb(qbase + 5);
- }
- rtrc(0)
+#define INT_TYPE 2
- if (priv->qabort)
- return ((priv->qabort == 1 ? DID_ABORT : DID_RESET) << 16);
-
- return (result << 16) | (message << 8) | (status & STATUS_MASK);
-}
-
-/*
- * Interrupt handler
- */
-
-static void ql_ihandl(int irq, void *dev_id, struct pt_regs *regs)
-{
- Scsi_Cmnd *icmd;
- struct Scsi_Host *host = (struct Scsi_Host *)dev_id;
- qlogicfas_priv_t priv = (qlogicfas_priv_t)&(host->hostdata[0]);
- int qbase = priv->qbase;
- REG0;
-
- if (!(inb(qbase + 4) & 0x80)) /* false alarm? */
- return;
-
- if (priv->qlcmd == NULL) { /* no command to process? */
- int i;
- i = 16;
- while (i-- && inb(qbase + 5)); /* maybe also ql_zap() */
- return;
- }
- icmd = priv->qlcmd;
- icmd->result = ql_pcmd(icmd);
- priv->qlcmd = NULL;
- /*
- * If result is CHECK CONDITION done calls qcommand to request
- * sense
- */
- (icmd->scsi_done) (icmd);
-}
-
-irqreturn_t do_ql_ihandl(int irq, void *dev_id, struct pt_regs *regs)
-{
- unsigned long flags;
- struct Scsi_Host *host = dev_id;
-
- spin_lock_irqsave(host->host_lock, flags);
- ql_ihandl(irq, dev_id, regs);
- spin_unlock_irqrestore(host->host_lock, flags);
- return IRQ_HANDLED;
-}
-
-/*
- * Queued command
- */
-
-int qlogicfas_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
-{
- qlogicfas_priv_t priv = (qlogicfas_priv_t)&(cmd->device->host->hostdata[0]);
- if (cmd->device->id == priv->qinitid) {
- cmd->result = DID_BAD_TARGET << 16;
- done(cmd);
- return 0;
- }
-
- cmd->scsi_done = done;
- /* wait for the last command's interrupt to finish */
- while (priv->qlcmd != NULL) {
- barrier();
- cpu_relax();
- }
- ql_icmd(cmd);
- return 0;
-}
+static char qlogicfas_name[] = "qlogicfas";
-#ifndef PCMCIA
/*
* Look for qlogic card and init if found
*/
-struct Scsi_Host *__qlogicfas_detect(Scsi_Host_Template *host, int qbase,
+static struct Scsi_Host *__qlogicfas_detect(Scsi_Host_Template *host,
+ int qbase,
int qlirq)
{
- int i, j; /* these are only used by IRQ detect */
int qltyp; /* type of chip */
int qinitid;
struct Scsi_Host *hreg; /* registered host structure */
- qlogicfas_priv_t priv;
+ struct qlogicfas408_priv *priv;
/* Qlogic Cards only exist at 0x230 or 0x330 (the chip itself
* decodes the address - I check 230 first since MIDI cards are
* the second card, but I haven't tested this.
*/
- if (!qbase) {
- for (qbase = 0x230; qbase < 0x430; qbase += 0x100) {
- if (!request_region(qbase, 0x10, qlogicfas_name))
- continue;
- REG1;
- if (((inb(qbase + 0xe) ^ inb(qbase + 0xe)) == 7)
- && ((inb(qbase + 0xe) ^ inb(qbase + 0xe)) == 7))
- break;
- release_region(qbase, 0x10);
- }
- if (qbase == 0x430)
- return NULL;
- } else
- printk(KERN_INFO "Ql: Using preset base address of %03x\n", qbase);
+ if (!qbase || qlirq == -1)
+ goto err;
- qltyp = inb(qbase + 0xe) & 0xf8;
+ if (!request_region(qbase, 0x10, qlogicfas_name)) {
+ printk(KERN_INFO "%s: address %#x is busy\n", qlogicfas_name,
+ qbase);
+ goto err;
+ }
+
+ if (!qlogicfas408_detect(qbase, INT_TYPE)) {
+ printk(KERN_WARNING "%s: probe failed for %#x\n",
+ qlogicfas_name,
+ qbase);
+ goto err_release_mem;
+ }
+
+ printk(KERN_INFO "%s: Using preset base address of %03x,"
+ " IRQ %d\n", qlogicfas_name, qbase, qlirq);
+
+ qltyp = qlogicfas408_get_chip_type(qbase, INT_TYPE);
qinitid = host->this_id;
if (qinitid < 0)
qinitid = 7; /* if no ID, use 7 */
- outb(1, qbase + 8); /* set for PIO pseudo DMA */
- REG0;
- outb(0x40 | qlcfg8 | qinitid, qbase + 8); /* (ini) bus id, disable scsi rst */
- outb(qlcfg5, qbase + 5); /* select timer */
- outb(qlcfg9, qbase + 9); /* prescaler */
-
-#if QL_RESET_AT_START
- outb(3, qbase + 3);
- REG1;
- /* FIXME: timeout */
- while (inb(qbase + 0xf) & 4)
- cpu_relax();
- REG0;
-#endif
-
- /*
- * IRQ probe - toggle pin and check request pending
- */
- if (qlirq == -1) {
- i = 0xffff;
- j = 3;
- outb(0x90, qbase + 3); /* illegal command - cause interrupt */
- REG1;
- outb(10, 0x20); /* access pending interrupt map */
- outb(10, 0xa0);
- while (j--) {
- outb(0xb0 | QL_INT_ACTIVE_HIGH, qbase + 0xd); /* int pin off */
- i &= ~(inb(0x20) | (inb(0xa0) << 8)); /* find IRQ off */
- outb(0xb4 | QL_INT_ACTIVE_HIGH, qbase + 0xd); /* int pin on */
- i &= inb(0x20) | (inb(0xa0) << 8); /* find IRQ on */
- }
- REG0;
- while (inb(qbase + 5)); /* purge int */
- j = -1;
- while (i) /* find on bit */
- i >>= 1, j++; /* should check for exactly 1 on */
- qlirq = j;
- } else
- printk(KERN_INFO "Ql: Using preset IRQ %d\n", qlirq);
-
- hreg = scsi_host_alloc(host, sizeof(struct qlogicfas_priv));
+ qlogicfas408_setup(qbase, qinitid, INT_TYPE);
+
+ hreg = scsi_host_alloc(host, sizeof(struct qlogicfas408_priv));
if (!hreg)
goto err_release_mem;
- priv = (qlogicfas_priv_t)&(hreg->hostdata[0]);
+ priv = get_priv_by_host(hreg);
hreg->io_port = qbase;
hreg->n_io_port = 16;
hreg->dma_channel = -1;
priv->qlirq = qlirq;
priv->qinitid = qinitid;
priv->shost = hreg;
+ priv->int_type = INT_TYPE;
sprintf(priv->qinfo,
"Qlogicfas Driver version 0.46, chip %02X at %03X, IRQ %d, TPdma:%d",
qltyp, qbase, qlirq, QL_TURBO_PDMA);
host->name = qlogicfas_name;
- if (request_irq(qlirq, do_ql_ihandl, 0, qlogicfas_name, hreg))
+ if (request_irq(qlirq, qlogicfas408_ihandl, 0, qlogicfas_name, hreg))
goto free_scsi_host;
if (scsi_add_host(hreg, NULL))
err_release_mem:
release_region(qbase, 0x10);
+err:
return NULL;
}
#define MAX_QLOGICFAS 8
-static qlogicfas_priv_t cards;
+static struct qlogicfas408_priv *cards;
static int iobase[MAX_QLOGICFAS];
static int irq[MAX_QLOGICFAS] = { [0 ... MAX_QLOGICFAS-1] = -1 };
MODULE_PARM(iobase, "1-" __MODULE_STRING(MAX_QLOGICFAS) "i");
MODULE_PARM_DESC(iobase, "I/O address");
MODULE_PARM_DESC(irq, "IRQ");
-int __devinit qlogicfas_detect(Scsi_Host_Template *sht)
+static int __devinit qlogicfas_detect(Scsi_Host_Template *sht)
{
- struct Scsi_Host *shost;
- qlogicfas_priv_t priv;
- int i,
- num = 0;
+ struct Scsi_Host *shost;
+ struct qlogicfas408_priv *priv;
+ int num;
- for (i = 0; i < MAX_QLOGICFAS; i++) {
+ for (num = 0; num < MAX_QLOGICFAS; num++) {
shost = __qlogicfas_detect(sht, iobase[num], irq[num]);
if (shost == NULL) {
/* no more devices */
break;
}
- priv = (qlogicfas_priv_t)&(shost->hostdata[0]);
+ priv = get_priv_by_host(shost);
priv->next = cards;
cards = priv;
- num++;
}
return num;
static int qlogicfas_release(struct Scsi_Host *shost)
{
- qlogicfas_priv_t priv = (qlogicfas_priv_t)&(shost->hostdata[0]);
- int qbase = priv->qbase;
+ struct qlogicfas408_priv *priv = get_priv_by_host(shost);
if (shost->irq) {
- REG1;
- outb(0, qbase + 0xb); /* disable ints */
-
+ qlogicfas408_disable_ints(priv);
free_irq(shost->irq, shost);
}
if (shost->dma_channel != 0xff)
return 0;
}
-#endif /* ifndef PCMCIA */
-
-/*
- * Return bios parameters
- */
-
-int qlogicfas_biosparam(struct scsi_device * disk,
- struct block_device *dev,
- sector_t capacity, int ip[])
-{
-/* This should mimic the DOS Qlogic driver's behavior exactly */
- ip[0] = 0x40;
- ip[1] = 0x20;
- ip[2] = (unsigned long) capacity / (ip[0] * ip[1]);
- if (ip[2] > 1024) {
- ip[0] = 0xff;
- ip[1] = 0x3f;
- ip[2] = (unsigned long) capacity / (ip[0] * ip[1]);
-#if 0
- if (ip[2] > 1023)
- ip[2] = 1023;
-#endif
- }
- return 0;
-}
-
-/*
- * Abort a command in progress
- */
-
-static int qlogicfas_abort(Scsi_Cmnd * cmd)
-{
- qlogicfas_priv_t priv = (qlogicfas_priv_t)&(cmd->device->host->hostdata[0]);
- priv->qabort = 1;
- ql_zap(priv);
- return SUCCESS;
-}
-
-/*
- * Reset SCSI bus
- * FIXME: This function is invoked with cmd = NULL directly by
- * the PCMCIA qlogic_stub code. This wants fixing
- */
-
-int qlogicfas_bus_reset(Scsi_Cmnd * cmd)
-{
- qlogicfas_priv_t priv = (qlogicfas_priv_t)&(cmd->device->host->hostdata[0]);
- priv->qabort = 2;
- ql_zap(priv);
- return SUCCESS;
-}
-
-/*
- * Reset SCSI host controller
- */
-
-static int qlogicfas_host_reset(Scsi_Cmnd * cmd)
-{
- return FAILED;
-}
-
-/*
- * Reset SCSI device
- */
-
-static int qlogicfas_device_reset(Scsi_Cmnd * cmd)
-{
- return FAILED;
-}
-
-/*
- * Return info string
- */
-
-static const char *qlogicfas_info(struct Scsi_Host *host)
-{
- qlogicfas_priv_t priv = (qlogicfas_priv_t)&(host->hostdata[0]);
- return priv->qinfo;
-}
/*
* The driver template is also needed for PCMCIA
*/
-Scsi_Host_Template qlogicfas_driver_template = {
+static Scsi_Host_Template qlogicfas_driver_template = {
.module = THIS_MODULE,
.name = qlogicfas_name,
.proc_name = qlogicfas_name,
- .info = qlogicfas_info,
- .queuecommand = qlogicfas_queuecommand,
- .eh_abort_handler = qlogicfas_abort,
- .eh_bus_reset_handler = qlogicfas_bus_reset,
- .eh_device_reset_handler= qlogicfas_device_reset,
- .eh_host_reset_handler = qlogicfas_host_reset,
- .bios_param = qlogicfas_biosparam,
+ .info = qlogicfas408_info,
+ .queuecommand = qlogicfas408_queuecommand,
+ .eh_abort_handler = qlogicfas408_abort,
+ .eh_bus_reset_handler = qlogicfas408_bus_reset,
+ .eh_device_reset_handler= qlogicfas408_device_reset,
+ .eh_host_reset_handler = qlogicfas408_host_reset,
+ .bios_param = qlogicfas408_biosparam,
.can_queue = 1,
.this_id = -1,
.sg_tablesize = SG_ALL,
.use_clustering = DISABLE_CLUSTERING,
};
-#ifndef PCMCIA
static __init int qlogicfas_init(void)
{
if (!qlogicfas_detect(&qlogicfas_driver_template)) {
/* no cards found */
+ printk(KERN_INFO "%s: no cards were found, please specify "
+ "I/O address and IRQ using iobase= and irq= "
+ "options", qlogicfas_name);
return -ENODEV;
}
static __exit void qlogicfas_exit(void)
{
- qlogicfas_priv_t priv;
+ struct qlogicfas408_priv *priv;
for (priv = cards; priv != NULL; priv = priv->next)
qlogicfas_release(priv->shost);
}
MODULE_AUTHOR("Tom Zerucha, Michael Griffith");
-MODULE_DESCRIPTION("Driver for the Qlogic FAS SCSI controllers");
+MODULE_DESCRIPTION("Driver for the Qlogic FAS408 based ISA card");
MODULE_LICENSE("GPL");
module_init(qlogicfas_init);
module_exit(qlogicfas_exit);
-#endif /* ifndef PCMCIA */