add_timer(&scmd->eh_timeout);
}
+EXPORT_SYMBOL(scsi_add_timer);
/**
* scsi_delete_timer - Delete/cancel timer for a given function.
return rtn;
}
+EXPORT_SYMBOL(scsi_delete_timer);
/**
* scsi_times_out - Timeout function for normal scsi commands.
return online;
}
+EXPORT_SYMBOL(scsi_block_when_processing_errors);
#ifdef CONFIG_SCSI_LOGGING
/**
*
* Return value:
* SUCCESS or FAILED or NEEDS_RETRY
+ *
+ * Notes:
+ * When a deferred error is detected the current command has
+ * not been executed and needs retrying.
**/
static int scsi_check_sense(struct scsi_cmnd *scmd)
{
- if (!SCSI_SENSE_VALID(scmd))
- return FAILED;
+ struct scsi_sense_hdr sshdr;
- if (scmd->sense_buffer[2] & 0xe0)
- return SUCCESS;
+ if (! scsi_command_normalize_sense(scmd, &sshdr))
+ return FAILED; /* no valid sense data */
+
+ if (scsi_sense_is_deferred(&sshdr))
+ return NEEDS_RETRY;
- switch (scmd->sense_buffer[2] & 0xf) {
+ /*
+ * Previous logic looked for FILEMARK, EOM or ILI which are
+ * mainly associated with tapes and returned SUCCESS.
+ */
+ if (sshdr.response_code == 0x70) {
+ /* fixed format */
+ if (scmd->sense_buffer[2] & 0xe0)
+ return SUCCESS;
+ } else {
+ /*
+ * descriptor format: look for "stream commands sense data
+ * descriptor" (see SSC-3). Assume single sense data
+ * descriptor. Ignore ILI from SBC-2 READ LONG and WRITE LONG.
+ */
+ if ((sshdr.additional_length > 3) &&
+ (scmd->sense_buffer[8] == 0x4) &&
+ (scmd->sense_buffer[11] & 0xe0))
+ return SUCCESS;
+ }
+
+ switch (sshdr.sense_key) {
case NO_SENSE:
return SUCCESS;
case RECOVERED_ERROR:
* if the device is in the process of becoming ready, we
* should retry.
*/
- if ((scmd->sense_buffer[12] == 0x04) &&
- (scmd->sense_buffer[13] == 0x01)) {
+ if ((sshdr.asc == 0x04) && (sshdr.ascq == 0x01))
return NEEDS_RETRY;
- }
/*
* if the device is not started, we need to wake
* the error handler to start the motor
*/
if (scmd->device->allow_restart &&
- (scmd->sense_buffer[12] == 0x04) &&
- (scmd->sense_buffer[13] == 0x02)) {
+ (sshdr.asc == 0x04) && (sshdr.ascq == 0x02))
return FAILED;
- }
return SUCCESS;
/* these three are not supported */
return SUCCESS;
case RESERVATION_CONFLICT:
- printk("scsi%d (%d,%d,%d) : reservation conflict\n",
+ printk(KERN_INFO "scsi: reservation conflict: host"
+ " %d channel %d id %d lun %d\n",
scmd->device->host->host_no, scmd->device->channel,
scmd->device->id, scmd->device->lun);
return SUCCESS; /* causes immediate i/o error */
}
}
}
+EXPORT_SYMBOL(scsi_report_bus_reset);
/*
* Function: scsi_report_device_reset()
}
}
}
+EXPORT_SYMBOL(scsi_report_device_reset);
static void
scsi_reset_provider_done_command(struct scsi_cmnd *scmd)
scsi_next_command(scmd);
return rtn;
}
+EXPORT_SYMBOL(scsi_reset_provider);
+
+/**
+ * scsi_normalize_sense - normalize main elements from either fixed or
+ * descriptor sense data format into a common format.
+ *
+ * @sense_buffer: byte array containing sense data returned by device
+ * @sb_len: number of valid bytes in sense_buffer
+ * @sshdr: pointer to instance of structure that common
+ * elements are written to.
+ *
+ * Notes:
+ * The "main elements" from sense data are: response_code, sense_key,
+ * asc, ascq and additional_length (only for descriptor format).
+ *
+ * Typically this function can be called after a device has
+ * responded to a SCSI command with the CHECK_CONDITION status.
+ *
+ * Return value:
+ * 1 if valid sense data information found, else 0;
+ **/
+int scsi_normalize_sense(const u8 *sense_buffer, int sb_len,
+ struct scsi_sense_hdr *sshdr)
+{
+ if (!sense_buffer || !sb_len || (sense_buffer[0] & 0x70) != 0x70)
+ return 0;
+
+ memset(sshdr, 0, sizeof(struct scsi_sense_hdr));
+
+ sshdr->response_code = (sense_buffer[0] & 0x7f);
+ if (sshdr->response_code >= 0x72) {
+ /*
+ * descriptor format
+ */
+ if (sb_len > 1)
+ sshdr->sense_key = (sense_buffer[1] & 0xf);
+ if (sb_len > 2)
+ sshdr->asc = sense_buffer[2];
+ if (sb_len > 3)
+ sshdr->ascq = sense_buffer[3];
+ if (sb_len > 7)
+ sshdr->additional_length = sense_buffer[7];
+ } else {
+ /*
+ * fixed format
+ */
+ if (sb_len > 2)
+ sshdr->sense_key = (sense_buffer[2] & 0xf);
+ if (sb_len > 7) {
+ sb_len = (sb_len < (sense_buffer[7] + 8)) ?
+ sb_len : (sense_buffer[7] + 8);
+ if (sb_len > 12)
+ sshdr->asc = sense_buffer[12];
+ if (sb_len > 13)
+ sshdr->ascq = sense_buffer[13];
+ }
+ }
+
+ return 1;
+}
+EXPORT_SYMBOL(scsi_normalize_sense);
+
+int scsi_request_normalize_sense(struct scsi_request *sreq,
+ struct scsi_sense_hdr *sshdr)
+{
+ return scsi_normalize_sense(sreq->sr_sense_buffer,
+ sizeof(sreq->sr_sense_buffer), sshdr);
+}
+EXPORT_SYMBOL(scsi_request_normalize_sense);
+
+int scsi_command_normalize_sense(struct scsi_cmnd *cmd,
+ struct scsi_sense_hdr *sshdr)
+{
+ return scsi_normalize_sense(cmd->sense_buffer,
+ sizeof(cmd->sense_buffer), sshdr);
+}
+EXPORT_SYMBOL(scsi_command_normalize_sense);
+
+/**
+ * scsi_sense_desc_find - search for a given descriptor type in
+ * descriptor sense data format.
+ *
+ * @sense_buffer: byte array of descriptor format sense data
+ * @sb_len: number of valid bytes in sense_buffer
+ * @desc_type: value of descriptor type to find
+ * (e.g. 0 -> information)
+ *
+ * Notes:
+ * only valid when sense data is in descriptor format
+ *
+ * Return value:
+ * pointer to start of (first) descriptor if found else NULL
+ **/
+const u8 * scsi_sense_desc_find(const u8 * sense_buffer, int sb_len,
+ int desc_type)
+{
+ int add_sen_len, add_len, desc_len, k;
+ const u8 * descp;
+
+ if ((sb_len < 8) || (0 == (add_sen_len = sense_buffer[7])))
+ return NULL;
+ if ((sense_buffer[0] < 0x72) || (sense_buffer[0] > 0x73))
+ return NULL;
+ add_sen_len = (add_sen_len < (sb_len - 8)) ?
+ add_sen_len : (sb_len - 8);
+ descp = &sense_buffer[8];
+ for (desc_len = 0, k = 0; k < add_sen_len; k += desc_len) {
+ descp += desc_len;
+ add_len = (k < (add_sen_len - 1)) ? descp[1]: -1;
+ desc_len = add_len + 2;
+ if (descp[0] == desc_type)
+ return descp;
+ if (add_len < 0) // short descriptor ??
+ break;
+ }
+ return NULL;
+}
+EXPORT_SYMBOL(scsi_sense_desc_find);
+
+/**
+ * scsi_get_sense_info_fld - attempts to get information field from
+ * sense data (either fixed or descriptor format)
+ *
+ * @sense_buffer: byte array of sense data
+ * @sb_len: number of valid bytes in sense_buffer
+ * @info_out: pointer to 64 integer where 8 or 4 byte information
+ * field will be placed if found.
+ *
+ * Return value:
+ * 1 if information field found, 0 if not found.
+ **/
+int scsi_get_sense_info_fld(const u8 * sense_buffer, int sb_len,
+ u64 * info_out)
+{
+ int j;
+ const u8 * ucp;
+ u64 ull;
+
+ if (sb_len < 7)
+ return 0;
+ switch (sense_buffer[0] & 0x7f) {
+ case 0x70:
+ case 0x71:
+ if (sense_buffer[0] & 0x80) {
+ *info_out = (sense_buffer[3] << 24) +
+ (sense_buffer[4] << 16) +
+ (sense_buffer[5] << 8) + sense_buffer[6];
+ return 1;
+ } else
+ return 0;
+ case 0x72:
+ case 0x73:
+ ucp = scsi_sense_desc_find(sense_buffer, sb_len,
+ 0 /* info desc */);
+ if (ucp && (0xa == ucp[1])) {
+ ull = 0;
+ for (j = 0; j < 8; ++j) {
+ if (j > 0)
+ ull <<= 8;
+ ull |= ucp[4 + j];
+ }
+ *info_out = ull;
+ return 1;
+ } else
+ return 0;
+ default:
+ return 0;
+ }
+}
+EXPORT_SYMBOL(scsi_get_sense_info_fld);
git://git.onelab.eu / linux-2.6.git / blobdiff