* of PCI-SCSI IO processors.
*
* Copyright (C) 1999-2001 Gerard Roudier <groudier@free.fr>
+ * Copyright (c) 2003-2005 Matthew Wilcox <matthew@wil.cx>
*
* This driver is derived from the Linux sym53c8xx driver.
* Copyright (C) 1998-2000 Gerard Roudier
*
*-----------------------------------------------------------------------------
*
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. The name of the author may not be used to endorse or promote products
- * derived from this software without specific prior written permission.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
*
- * Where this Software is combined with software released under the terms of
- * the GNU Public License ("GPL") and the terms of the GPL would require the
- * combined work to also be released under the terms of the GPL, the terms
- * and conditions of this License will apply in addition to those of the
- * GPL with the exception of any terms or conditions of this License that
- * conflict with, or are expressly prohibited by, the GPL.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
*
- * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define SYM_GLUE_C
-
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/moduleparam.h>
#include <linux/spinlock.h>
#include <scsi/scsi.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_transport.h>
-#include <scsi/scsi_transport_spi.h>
#include "sym_glue.h"
#include "sym_nvram.h"
#define NAME53C "sym53c"
#define NAME53C8XX "sym53c8xx"
-static int __devinit
-pci_get_base_address(struct pci_dev *pdev, int index, u_long *base)
+/* SPARC just has to be different ... */
+#ifdef __sparc__
+#define IRQ_FMT "%s"
+#define IRQ_PRM(x) __irq_itoa(x)
+#else
+#define IRQ_FMT "%d"
+#define IRQ_PRM(x) (x)
+#endif
+
+struct sym_driver_setup sym_driver_setup = SYM_LINUX_DRIVER_SETUP;
+unsigned int sym_debug_flags = 0;
+
+static char *excl_string;
+static char *safe_string;
+module_param_named(cmd_per_lun, sym_driver_setup.max_tag, ushort, 0);
+module_param_string(tag_ctrl, sym_driver_setup.tag_ctrl, 100, 0);
+module_param_named(burst, sym_driver_setup.burst_order, byte, 0);
+module_param_named(led, sym_driver_setup.scsi_led, byte, 0);
+module_param_named(diff, sym_driver_setup.scsi_diff, byte, 0);
+module_param_named(irqm, sym_driver_setup.irq_mode, byte, 0);
+module_param_named(buschk, sym_driver_setup.scsi_bus_check, byte, 0);
+module_param_named(hostid, sym_driver_setup.host_id, byte, 0);
+module_param_named(verb, sym_driver_setup.verbose, byte, 0);
+module_param_named(debug, sym_debug_flags, uint, 0);
+module_param_named(settle, sym_driver_setup.settle_delay, byte, 0);
+module_param_named(nvram, sym_driver_setup.use_nvram, byte, 0);
+module_param_named(excl, excl_string, charp, 0);
+module_param_named(safe, safe_string, charp, 0);
+
+MODULE_PARM_DESC(cmd_per_lun, "The maximum number of tags to use by default");
+MODULE_PARM_DESC(tag_ctrl, "More detailed control over tags per LUN");
+MODULE_PARM_DESC(burst, "Maximum burst. 0 to disable, 255 to read from registers");
+MODULE_PARM_DESC(led, "Set to 1 to enable LED support");
+MODULE_PARM_DESC(diff, "0 for no differential mode, 1 for BIOS, 2 for always, 3 for not GPIO3");
+MODULE_PARM_DESC(irqm, "0 for open drain, 1 to leave alone, 2 for totem pole");
+MODULE_PARM_DESC(buschk, "0 to not check, 1 for detach on error, 2 for warn on error");
+MODULE_PARM_DESC(hostid, "The SCSI ID to use for the host adapters");
+MODULE_PARM_DESC(verb, "0 for minimal verbosity, 1 for normal, 2 for excessive");
+MODULE_PARM_DESC(debug, "Set bits to enable debugging");
+MODULE_PARM_DESC(settle, "Settle delay in seconds. Default 3");
+MODULE_PARM_DESC(nvram, "Option currently not used");
+MODULE_PARM_DESC(excl, "List ioport addresses here to prevent controllers from being attached");
+MODULE_PARM_DESC(safe, "Set other settings to a \"safe mode\"");
+
+MODULE_LICENSE("GPL");
+MODULE_VERSION(SYM_VERSION);
+MODULE_AUTHOR("Matthew Wilcox <matthew@wil.cx>");
+MODULE_DESCRIPTION("NCR, Symbios and LSI 8xx and 1010 PCI SCSI adapters");
+
+static void sym2_setup_params(void)
{
- u32 tmp;
-#define PCI_BAR_OFFSET(index) (PCI_BASE_ADDRESS_0 + (index<<2))
+ char *p = excl_string;
+ int xi = 0;
- pci_read_config_dword(pdev, PCI_BAR_OFFSET(index), &tmp);
- *base = tmp;
- ++index;
- if ((tmp & 0x7) == PCI_BASE_ADDRESS_MEM_TYPE_64) {
-#if BITS_PER_LONG > 32
- pci_read_config_dword(pdev, PCI_BAR_OFFSET(index), &tmp);
- *base |= (((u_long)tmp) << 32);
-#endif
- ++index;
+ while (p && (xi < 8)) {
+ char *next_p;
+ int val = (int) simple_strtoul(p, &next_p, 0);
+ sym_driver_setup.excludes[xi++] = val;
+ p = next_p;
}
- return index;
-#undef PCI_BAR_OFFSET
-}
-
-/* This lock protects only the memory allocation/free. */
-spinlock_t sym53c8xx_lock = SPIN_LOCK_UNLOCKED;
-static struct scsi_transport_template *sym2_transport_template = NULL;
+ if (safe_string) {
+ if (*safe_string == 'y') {
+ sym_driver_setup.max_tag = 0;
+ sym_driver_setup.burst_order = 0;
+ sym_driver_setup.scsi_led = 0;
+ sym_driver_setup.scsi_diff = 1;
+ sym_driver_setup.irq_mode = 0;
+ sym_driver_setup.scsi_bus_check = 2;
+ sym_driver_setup.host_id = 7;
+ sym_driver_setup.verbose = 2;
+ sym_driver_setup.settle_delay = 10;
+ sym_driver_setup.use_nvram = 1;
+ } else if (*safe_string != 'n') {
+ printk(KERN_WARNING NAME53C8XX "Ignoring parameter %s"
+ " passed to safe option", safe_string);
+ }
+ }
+}
/*
- * Wrappers to the generic memory allocator.
+ * We used to try to deal with 64-bit BARs here, but don't any more.
+ * There are many parts of this driver which would need to be modified
+ * to handle a 64-bit base address, including scripts. I'm uncomfortable
+ * with making those changes when I have no way of testing it, so I'm
+ * just going to disable it.
+ *
+ * Note that some machines (eg HP rx8620 and Superdome) have bus addresses
+ * below 4GB and physical addresses above 4GB. These will continue to work.
*/
-void *sym_calloc(int size, char *name)
+static int __devinit
+pci_get_base_address(struct pci_dev *pdev, int index, unsigned long *basep)
{
- unsigned long flags;
- void *m;
- spin_lock_irqsave(&sym53c8xx_lock, flags);
- m = sym_calloc_unlocked(size, name);
- spin_unlock_irqrestore(&sym53c8xx_lock, flags);
- return m;
-}
+ u32 tmp;
+ unsigned long base;
+#define PCI_BAR_OFFSET(index) (PCI_BASE_ADDRESS_0 + (index<<2))
-void sym_mfree(void *m, int size, char *name)
-{
- unsigned long flags;
- spin_lock_irqsave(&sym53c8xx_lock, flags);
- sym_mfree_unlocked(m, size, name);
- spin_unlock_irqrestore(&sym53c8xx_lock, flags);
-}
+ pci_read_config_dword(pdev, PCI_BAR_OFFSET(index++), &tmp);
+ base = tmp;
+ if ((tmp & 0x7) == PCI_BASE_ADDRESS_MEM_TYPE_64) {
+ pci_read_config_dword(pdev, PCI_BAR_OFFSET(index++), &tmp);
+ if (tmp > 0)
+ dev_err(&pdev->dev,
+ "BAR %d is 64-bit, disabling\n", index - 1);
+ base = 0;
+ }
-void *__sym_calloc_dma(m_pool_ident_t dev_dmat, int size, char *name)
-{
- unsigned long flags;
- void *m;
- spin_lock_irqsave(&sym53c8xx_lock, flags);
- m = __sym_calloc_dma_unlocked(dev_dmat, size, name);
- spin_unlock_irqrestore(&sym53c8xx_lock, flags);
- return m;
-}
+ if ((base & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) {
+ base &= PCI_BASE_ADDRESS_IO_MASK;
+ } else {
+ base &= PCI_BASE_ADDRESS_MEM_MASK;
+ }
-void __sym_mfree_dma(m_pool_ident_t dev_dmat, void *m, int size, char *name)
-{
- unsigned long flags;
- spin_lock_irqsave(&sym53c8xx_lock, flags);
- __sym_mfree_dma_unlocked(dev_dmat, m, size, name);
- spin_unlock_irqrestore(&sym53c8xx_lock, flags);
+ *basep = base;
+ return index;
+#undef PCI_BAR_OFFSET
}
-m_addr_t __vtobus(m_pool_ident_t dev_dmat, void *m)
-{
- unsigned long flags;
- m_addr_t b;
- spin_lock_irqsave(&sym53c8xx_lock, flags);
- b = __vtobus_unlocked(dev_dmat, m);
- spin_unlock_irqrestore(&sym53c8xx_lock, flags);
- return b;
-}
+static struct scsi_transport_template *sym2_transport_template = NULL;
/*
* Used by the eh thread to wait for command completion.
* It is allocated on the eh thread stack.
*/
struct sym_eh_wait {
- struct semaphore sem;
+ struct completion done;
struct timer_list timer;
void (*old_done)(struct scsi_cmnd *);
int to_do;
* Driver private area in the SCSI command structure.
*/
struct sym_ucmd { /* Override the SCSI pointer structure */
- SYM_QUEHEAD link_cmdq; /* Must stay at offset ZERO */
dma_addr_t data_mapping;
u_char data_mapped;
struct sym_eh_wait *eh_wait;
};
#define SYM_UCMD_PTR(cmd) ((struct sym_ucmd *)(&(cmd)->SCp))
-#define SYM_SCMD_PTR(ucmd) sym_que_entry(ucmd, struct scsi_cmnd, SCp)
-#define SYM_SOFTC_PTR(cmd) (((struct host_data *)cmd->device->host->hostdata)->ncb)
+#define SYM_SOFTC_PTR(cmd) sym_get_hcb(cmd->device->host)
static void __unmap_scsi_data(struct pci_dev *pdev, struct scsi_cmnd *cmd)
{
/*
* Complete a pending CAM CCB.
*/
-void sym_xpt_done(struct sym_hcb *np, struct scsi_cmnd *ccb)
+void sym_xpt_done(struct sym_hcb *np, struct scsi_cmnd *cmd)
{
- sym_remque(&SYM_UCMD_PTR(ccb)->link_cmdq);
- unmap_scsi_data(np, ccb);
- ccb->scsi_done(ccb);
+ unmap_scsi_data(np, cmd);
+ cmd->scsi_done(cmd);
}
-void sym_xpt_done2(struct sym_hcb *np, struct scsi_cmnd *ccb, int cam_status)
+static void sym_xpt_done2(struct sym_hcb *np, struct scsi_cmnd *cmd, int cam_status)
{
- sym_set_cam_status(ccb, cam_status);
- sym_xpt_done(np, ccb);
+ sym_set_cam_status(cmd, cam_status);
+ sym_xpt_done(np, cmd);
}
-/*
- * Print something that identifies the IO.
- */
-void sym_print_addr(struct sym_ccb *cp)
-{
- struct scsi_cmnd *cmd = cp->cam_ccb;
- if (cmd)
- printf("%s:%d:%d:", sym_name(SYM_SOFTC_PTR(cmd)),
- cmd->device->id, cmd->device->lun);
-}
-
/*
* Tell the SCSI layer about a BUS RESET.
*/
printf_notice("%s: TARGET %d has been reset.\n", sym_name(np), target);
}
-/*
- * Tell the SCSI layer about the new transfer parameters.
- */
-void sym_xpt_async_nego_wide(struct sym_hcb *np, int target)
-{
- if (sym_verbose < 3)
- return;
- sym_announce_transfer_rate(np, target);
-}
-
/*
* Choose the more appropriate CAM status if
* the IO encountered an extended error.
*/
void sym_set_cam_result_error(struct sym_hcb *np, struct sym_ccb *cp, int resid)
{
- struct scsi_cmnd *csio = cp->cam_ccb;
+ struct scsi_cmnd *cmd = cp->cmd;
u_int cam_status, scsi_status, drv_status;
drv_status = 0;
scsi_status = cp->sv_scsi_status;
resid = cp->sv_resid;
if (sym_verbose && cp->sv_xerr_status)
- sym_print_xerr(cp, cp->sv_xerr_status);
+ sym_print_xerr(cmd, cp->sv_xerr_status);
if (cp->host_status == HS_COMPLETE &&
cp->ssss_status == S_GOOD &&
cp->xerr_status == 0) {
/*
* Bounce back the sense data to user.
*/
- bzero(&csio->sense_buffer, sizeof(csio->sense_buffer));
- memcpy(csio->sense_buffer, cp->sns_bbuf,
- min(sizeof(csio->sense_buffer),
+ memset(&cmd->sense_buffer, 0, sizeof(cmd->sense_buffer));
+ memcpy(cmd->sense_buffer, cp->sns_bbuf,
+ min(sizeof(cmd->sense_buffer),
(size_t)SYM_SNS_BBUF_LEN));
#if 0
/*
*/
if (1) {
u_char *p;
- p = (u_char *) csio->sense_data;
+ p = (u_char *) cmd->sense_data;
if (p[0]==0x70 && p[2]==0x6 && p[12]==0x29)
sym_clear_tasks(np, DID_ABORT,
cp->target,cp->lun, -1);
* condition otherwise the device will always return
* BUSY. Use a big stick.
*/
- sym_reset_scsi_target(np, csio->device->id);
+ sym_reset_scsi_target(np, cmd->device->id);
cam_status = DID_ERROR;
}
} else if (cp->host_status == HS_COMPLETE) /* Bad SCSI status */
cam_status = DID_ERROR;
else { /* Extended error */
if (sym_verbose) {
- PRINT_ADDR(cp);
- printf ("COMMAND FAILED (%x %x %x).\n",
+ sym_print_addr(cmd, "COMMAND FAILED (%x %x %x).\n",
cp->host_status, cp->ssss_status,
cp->xerr_status);
}
*/
cam_status = sym_xerr_cam_status(DID_ERROR, cp->xerr_status);
}
- csio->resid = resid;
- csio->result = (drv_status << 24) + (cam_status << 16) + scsi_status;
+ cmd->resid = resid;
+ cmd->result = (drv_status << 24) + (cam_status << 16) + scsi_status;
}
/*
* Queue a SCSI command.
*/
-static int sym_queue_command(struct sym_hcb *np, struct scsi_cmnd *ccb)
+static int sym_queue_command(struct sym_hcb *np, struct scsi_cmnd *cmd)
{
-/* struct scsi_device *device = ccb->device; */
+ struct scsi_device *sdev = cmd->device;
struct sym_tcb *tp;
struct sym_lcb *lp;
struct sym_ccb *cp;
* Minimal checkings, so that we will not
* go outside our tables.
*/
- if (ccb->device->id == np->myaddr ||
- ccb->device->id >= SYM_CONF_MAX_TARGET ||
- ccb->device->lun >= SYM_CONF_MAX_LUN) {
- sym_xpt_done2(np, ccb, CAM_DEV_NOT_THERE);
+ if (sdev->id == np->myaddr ||
+ sdev->id >= SYM_CONF_MAX_TARGET ||
+ sdev->lun >= SYM_CONF_MAX_LUN) {
+ sym_xpt_done2(np, cmd, CAM_DEV_NOT_THERE);
return 0;
}
/*
- * Retreive the target descriptor.
+ * Retrieve the target descriptor.
*/
- tp = &np->target[ccb->device->id];
+ tp = &np->target[sdev->id];
/*
* Complete the 1st INQUIRY command with error
* devices behave badly when asked for some non
* zero LUN. Btw, this is an absolute hack.:-)
*/
- if (ccb->cmnd[0] == 0x12 || ccb->cmnd[0] == 0x0) {
+ if (cmd->cmnd[0] == 0x12 || cmd->cmnd[0] == 0x0) {
if ((tp->usrflags & SYM_SCAN_BOOT_DISABLED) ||
((tp->usrflags & SYM_SCAN_LUNS_DISABLED) &&
- ccb->device->lun != 0)) {
+ sdev->lun != 0)) {
tp->usrflags &= ~SYM_SCAN_BOOT_DISABLED;
- sym_xpt_done2(np, ccb, CAM_DEV_NOT_THERE);
+ sym_xpt_done2(np, cmd, CAM_DEV_NOT_THERE);
return 0;
}
}
/*
* Select tagged/untagged.
*/
- lp = sym_lp(np, tp, ccb->device->lun);
+ lp = sym_lp(tp, sdev->lun);
order = (lp && lp->s.reqtags) ? M_SIMPLE_TAG : 0;
/*
* Queue the SCSI IO.
*/
- cp = sym_get_ccb(np, ccb->device->id, ccb->device->lun, order);
+ cp = sym_get_ccb(np, cmd, order);
if (!cp)
return 1; /* Means resource shortage */
- sym_queue_scsiio(np, ccb, cp);
+ sym_queue_scsiio(np, cmd, cp);
return 0;
}
/*
* Setup buffers and pointers that address the CDB.
*/
-static inline int sym_setup_cdb(struct sym_hcb *np, struct scsi_cmnd *ccb, struct sym_ccb *cp)
+static inline int sym_setup_cdb(struct sym_hcb *np, struct scsi_cmnd *cmd, struct sym_ccb *cp)
{
u32 cmd_ba;
int cmd_len;
/*
* CDB is 16 bytes max.
*/
- if (ccb->cmd_len > sizeof(cp->cdb_buf)) {
- sym_set_cam_status(cp->cam_ccb, CAM_REQ_INVALID);
+ if (cmd->cmd_len > sizeof(cp->cdb_buf)) {
+ sym_set_cam_status(cp->cmd, CAM_REQ_INVALID);
return -1;
}
- memcpy(cp->cdb_buf, ccb->cmnd, ccb->cmd_len);
+ memcpy(cp->cdb_buf, cmd->cmnd, cmd->cmd_len);
cmd_ba = CCB_BA (cp, cdb_buf[0]);
- cmd_len = ccb->cmd_len;
+ cmd_len = cmd->cmd_len;
cp->phys.cmd.addr = cpu_to_scr(cmd_ba);
cp->phys.cmd.size = cpu_to_scr(cmd_len);
/*
* Setup pointers that address the data and start the I/O.
*/
-int sym_setup_data_and_start(struct sym_hcb *np, struct scsi_cmnd *csio, struct sym_ccb *cp)
+int sym_setup_data_and_start(struct sym_hcb *np, struct scsi_cmnd *cmd, struct sym_ccb *cp)
{
int dir;
struct sym_tcb *tp = &np->target[cp->target];
- struct sym_lcb *lp = sym_lp(np, tp, cp->lun);
+ struct sym_lcb *lp = sym_lp(tp, cp->lun);
/*
* Build the CDB.
*/
- if (sym_setup_cdb(np, csio, cp))
+ if (sym_setup_cdb(np, cmd, cp))
goto out_abort;
/*
* No direction means no data.
*/
- dir = csio->sc_data_direction;
+ dir = cmd->sc_data_direction;
if (dir != DMA_NONE) {
- cp->segments = sym_scatter(np, cp, csio);
+ cp->segments = sym_scatter(np, cp, cmd);
if (cp->segments < 0) {
if (cp->segments == -2)
- sym_set_cam_status(csio, CAM_RESRC_UNAVAIL);
+ sym_set_cam_status(cmd, CAM_RESRC_UNAVAIL);
else
- sym_set_cam_status(csio, CAM_REQ_TOO_BIG);
+ sym_set_cam_status(cmd, CAM_REQ_TOO_BIG);
goto out_abort;
}
} else {
switch (cp->cdb_buf[0]) {
case 0x0A: case 0x2A: case 0xAA:
panic("XXXXXXXXXXXXX WRITE NOT YET ALLOWED XXXXXXXXXXXXXX\n");
- MDELAY(10000);
break;
default:
break;
out_abort:
sym_free_ccb(np, cp);
- sym_xpt_done(np, csio);
+ sym_xpt_done(np, cmd);
return 0;
}
}
}
-
-/*
- * Requeue awaiting commands.
- */
-static void sym_requeue_awaiting_cmds(struct sym_hcb *np)
-{
- struct sym_ucmd *ucp;
- SYM_QUEHEAD tmp_cmdq;
- int sts;
-
- sym_que_move(&np->s.wait_cmdq, &tmp_cmdq);
-
- while ((ucp = (struct sym_ucmd *) sym_remque_head(&tmp_cmdq)) != 0) {
- struct scsi_cmnd *cmd;
-
- sym_insque_tail(&ucp->link_cmdq, &np->s.busy_cmdq);
- cmd = SYM_SCMD_PTR(ucp);
- sts = sym_queue_command(np, cmd);
- if (sts) {
- sym_remque(&ucp->link_cmdq);
- sym_insque_head(&ucp->link_cmdq, &np->s.wait_cmdq);
- }
- }
-}
-
/*
* queuecommand method. Entered with the host adapter lock held and
* interrupts disabled.
int sts = 0;
cmd->scsi_done = done;
- cmd->host_scribble = NULL;
memset(ucp, 0, sizeof(*ucp));
/*
}
}
- if (np->s.settle_time_valid || !sym_que_empty(&np->s.wait_cmdq)) {
- sym_insque_tail(&ucp->link_cmdq, &np->s.wait_cmdq);
- goto out;
- }
+ if (np->s.settle_time_valid)
+ return SCSI_MLQUEUE_HOST_BUSY;
- sym_insque_tail(&ucp->link_cmdq, &np->s.busy_cmdq);
sts = sym_queue_command(np, cmd);
- if (sts) {
- sym_remque(&ucp->link_cmdq);
- sym_insque_tail(&ucp->link_cmdq, &np->s.wait_cmdq);
- }
-out:
+ if (sts)
+ return SCSI_MLQUEUE_HOST_BUSY;
return 0;
}
if (DEBUG_FLAGS & DEBUG_TINY) printf_debug ("[");
spin_lock_irqsave(np->s.host->host_lock, flags);
-
sym_interrupt(np);
-
- /*
- * push queue walk-through to tasklet
- */
- if (!sym_que_empty(&np->s.wait_cmdq) && !np->s.settle_time_valid)
- sym_requeue_awaiting_cmds(np);
-
spin_unlock_irqrestore(np->s.host->host_lock, flags);
if (DEBUG_FLAGS & DEBUG_TINY) printf_debug ("]\n");
unsigned long flags;
spin_lock_irqsave(np->s.host->host_lock, flags);
-
sym_timer(np);
-
- if (!sym_que_empty(&np->s.wait_cmdq) && !np->s.settle_time_valid)
- sym_requeue_awaiting_cmds(np);
-
spin_unlock_irqrestore(np->s.host->host_lock, flags);
}
/* Wake up the eh thread if it wants to sleep */
if (ep->to_do == SYM_EH_DO_WAIT)
- up(&ep->sem);
+ complete(&ep->done);
}
/*
int to_do = SYM_EH_DO_IGNORE;
int sts = -1;
struct sym_eh_wait eh, *ep = &eh;
- char devname[20];
-
- sprintf(devname, "%s:%d:%d", sym_name(np), cmd->device->id, cmd->device->lun);
-
- printf_warning("%s: %s operation started.\n", devname, opname);
-#if 0
- /* This one should be the result of some race, thus to ignore */
- if (cmd->serial_number != cmd->serial_number_at_timeout)
- goto prepare;
-#endif
-
- /* This one is not queued to the core driver -> to complete here */
- FOR_EACH_QUEUED_ELEMENT(&np->s.wait_cmdq, qp) {
- if (SYM_SCMD_PTR(qp) == cmd) {
- to_do = SYM_EH_DO_COMPLETE;
- goto prepare;
- }
- }
+ dev_warn(&cmd->device->sdev_gendev, "%s operation started.\n", opname);
/* This one is queued in some place -> to wait for completion */
FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) {
struct sym_ccb *cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
- if (cp->cam_ccb == cmd) {
+ if (cp->cmd == cmd) {
to_do = SYM_EH_DO_WAIT;
goto prepare;
}
case SYM_EH_DO_IGNORE:
break;
case SYM_EH_DO_WAIT:
- init_MUTEX_LOCKED(&ep->sem);
+ init_completion(&ep->done);
/* fall through */
case SYM_EH_DO_COMPLETE:
ep->old_done = cmd->scsi_done;
ep->timed_out = 1; /* Be pessimistic for once :) */
add_timer(&ep->timer);
spin_unlock_irq(np->s.host->host_lock);
- down(&ep->sem);
+ wait_for_completion(&ep->done);
spin_lock_irq(np->s.host->host_lock);
if (ep->timed_out)
sts = -2;
}
- printf_warning("%s: %s operation %s.\n", devname, opname,
- sts==0?"complete":sts==-2?"timed-out":"failed");
- return sts? SCSI_FAILED : SCSI_SUCCESS;
+ dev_warn(&cmd->device->sdev_gendev, "%s operation %s.\n", opname,
+ sts==0 ? "complete" :sts==-2 ? "timed-out" : "failed");
+ return sts ? SCSI_FAILED : SCSI_SUCCESS;
}
/*
* Tune device queuing depth, according to various limits.
*/
-static void sym_tune_dev_queuing(struct sym_hcb *np, int target, int lun, u_short reqtags)
+static void sym_tune_dev_queuing(struct sym_tcb *tp, int lun, u_short reqtags)
{
- struct sym_tcb *tp = &np->target[target];
- struct sym_lcb *lp = sym_lp(np, tp, lun);
+ struct sym_lcb *lp = sym_lp(tp, lun);
u_short oldtags;
if (!lp)
lp->s.reqtags = reqtags;
if (reqtags != oldtags) {
- printf_info("%s:%d:%d: "
+ dev_info(&tp->sdev->sdev_target->dev,
"tagged command queuing %s, command queue depth %d.\n",
- sym_name(np), target, lun,
lp->s.reqtags ? "enabled" : "disabled",
lp->started_limit);
}
}
-#ifdef SYM_LINUX_BOOT_COMMAND_LINE_SUPPORT
/*
* Linux select queue depths function
*/
}
return DEF_DEPTH;
}
-#else
-#define device_queue_depth(np, t, l) (sym_driver_setup.max_tag)
-#endif /* SYM_LINUX_BOOT_COMMAND_LINE_SUPPORT */
+
+static int sym53c8xx_slave_alloc(struct scsi_device *device)
+{
+ struct sym_hcb *np = sym_get_hcb(device->host);
+ struct sym_tcb *tp = &np->target[device->id];
+ if (!tp->sdev)
+ tp->sdev = device;
+
+ return 0;
+}
+
+static void sym53c8xx_slave_destroy(struct scsi_device *device)
+{
+ struct sym_hcb *np = sym_get_hcb(device->host);
+ struct sym_tcb *tp = &np->target[device->id];
+ if (tp->sdev == device)
+ tp->sdev = NULL;
+}
/*
* Linux entry point for device queue sizing.
*/
static int sym53c8xx_slave_configure(struct scsi_device *device)
{
- struct Scsi_Host *host = device->host;
- struct sym_hcb *np;
- struct sym_tcb *tp;
+ struct sym_hcb *np = sym_get_hcb(device->host);
+ struct sym_tcb *tp = &np->target[device->id];
struct sym_lcb *lp;
int reqtags, depth_to_use;
- np = ((struct host_data *) host->hostdata)->ncb;
- tp = &np->target[device->id];
- tp->sdev = device;
-
/*
* Allocate the LCB if not yet.
* If it fail, we may well be in the sh*t. :)
MSG_SIMPLE_TAG : 0),
depth_to_use);
lp->s.scdev_depth = depth_to_use;
- sym_tune_dev_queuing(np, device->id, device->lun, reqtags);
+ sym_tune_dev_queuing(tp, device->lun, reqtags);
- spi_dv_device(device);
+ if (!spi_initial_dv(device->sdev_target))
+ spi_dv_device(device);
return 0;
}
*/
static const char *sym53c8xx_info (struct Scsi_Host *host)
{
- return sym_driver_name();
+ return SYM_DRIVER_NAME;
}
case UC_SETSYNC:
if (!uc->data || uc->data >= 255) {
- tp->tinfo.goal.options = 0;
- tp->tinfo.goal.offset = 0;
- break;
- }
- if (uc->data <= 9 && np->minsync_dt) {
+ tp->tgoal.iu = tp->tgoal.dt =
+ tp->tgoal.qas = 0;
+ tp->tgoal.offset = 0;
+ } else if (uc->data <= 9 && np->minsync_dt) {
if (uc->data < np->minsync_dt)
uc->data = np->minsync_dt;
- tp->tinfo.goal.options = PPR_OPT_DT;
- tp->tinfo.goal.width = 1;
- tp->tinfo.goal.period = uc->data;
- tp->tinfo.goal.offset = np->maxoffs_dt;
+ tp->tgoal.iu = tp->tgoal.dt =
+ tp->tgoal.qas = 1;
+ tp->tgoal.width = 1;
+ tp->tgoal.period = uc->data;
+ tp->tgoal.offset = np->maxoffs_dt;
} else {
if (uc->data < np->minsync)
uc->data = np->minsync;
- tp->tinfo.goal.options = 0;
- tp->tinfo.goal.period = uc->data;
- tp->tinfo.goal.offset = np->maxoffs;
+ tp->tgoal.iu = tp->tgoal.dt =
+ tp->tgoal.qas = 0;
+ tp->tgoal.period = uc->data;
+ tp->tgoal.offset = np->maxoffs;
}
+ tp->tgoal.check_nego = 1;
break;
case UC_SETWIDE:
- tp->tinfo.goal.width = uc->data ? 1 : 0;
+ tp->tgoal.width = uc->data ? 1 : 0;
+ tp->tgoal.check_nego = 1;
break;
case UC_SETTAGS:
for (l = 0; l < SYM_CONF_MAX_LUN; l++)
- sym_tune_dev_queuing(np, t,l, uc->data);
+ sym_tune_dev_queuing(tp, l, uc->data);
break;
case UC_RESETDEV:
tp->to_reset = 1;
np->istat_sem = SEM;
- OUTB (nc_istat, SIGP|SEM);
+ OUTB(np, nc_istat, SIGP|SEM);
break;
case UC_CLEARDEV:
for (l = 0; l < SYM_CONF_MAX_LUN; l++) {
- struct sym_lcb *lp = sym_lp(np, tp, l);
+ struct sym_lcb *lp = sym_lp(tp, l);
if (lp) lp->to_clear = 1;
}
np->istat_sem = SEM;
- OUTB (nc_istat, SIGP|SEM);
+ OUTB(np, nc_istat, SIGP|SEM);
break;
case UC_SETFLAG:
tp->usrflags = uc->data;
}
}
-#define digit_to_bin(c) ((c) - '0')
-
static int skip_spaces(char *ptr, int len)
{
int cnt, c;
static int get_int_arg(char *ptr, int len, u_long *pv)
{
- int cnt, c;
- u_long v;
+ char *end;
- for (v = 0, cnt = len; cnt > 0 && (c = *ptr++) && isdigit(c); cnt--) {
- v = (v * 10) + digit_to_bin(c);
- }
-
- if (pv)
- *pv = v;
-
- return (len - cnt);
+ *pv = simple_strtoul(ptr, &end, 10);
+ return (end - ptr);
}
static int is_keyword(char *ptr, int len, char *verb)
return verb_len;
else
return 0;
-
}
-#define SKIP_SPACES(min_spaces) \
- if ((arg_len = skip_spaces(ptr, len)) < (min_spaces)) \
+#define SKIP_SPACES(ptr, len) \
+ if ((arg_len = skip_spaces(ptr, len)) < 1) \
return -EINVAL; \
ptr += arg_len; len -= arg_len;
-#define GET_INT_ARG(v) \
+#define GET_INT_ARG(ptr, len, v) \
if (!(arg_len = get_int_arg(ptr, len, &(v)))) \
return -EINVAL; \
ptr += arg_len; len -= arg_len;
int arg_len;
u_long target;
- bzero(uc, sizeof(*uc));
+ memset(uc, 0, sizeof(*uc));
if (len > 0 && ptr[len-1] == '\n')
--len;
case UC_SETFLAG:
case UC_RESETDEV:
case UC_CLEARDEV:
- SKIP_SPACES(1);
+ SKIP_SPACES(ptr, len);
if ((arg_len = is_keyword(ptr, len, "all")) != 0) {
ptr += arg_len; len -= arg_len;
uc->target = ~0;
} else {
- GET_INT_ARG(target);
+ GET_INT_ARG(ptr, len, target);
uc->target = (1<<target);
#ifdef DEBUG_PROC_INFO
printk("sym_user_command: target=%ld\n", target);
case UC_SETSYNC:
case UC_SETTAGS:
case UC_SETWIDE:
- SKIP_SPACES(1);
- GET_INT_ARG(uc->data);
+ SKIP_SPACES(ptr, len);
+ GET_INT_ARG(ptr, len, uc->data);
#ifdef DEBUG_PROC_INFO
printk("sym_user_command: data=%ld\n", uc->data);
#endif
#ifdef SYM_LINUX_DEBUG_CONTROL_SUPPORT
case UC_SETDEBUG:
while (len > 0) {
- SKIP_SPACES(1);
+ SKIP_SPACES(ptr, len);
if ((arg_len = is_keyword(ptr, len, "alloc")))
uc->data |= DEBUG_ALLOC;
else if ((arg_len = is_keyword(ptr, len, "phase")))
#endif /* SYM_LINUX_DEBUG_CONTROL_SUPPORT */
case UC_SETFLAG:
while (len > 0) {
- SKIP_SPACES(1);
+ SKIP_SPACES(ptr, len);
if ((arg_len = is_keyword(ptr, len, "no_disc")))
uc->data &= ~SYM_DISC_ENABLED;
else
copy_info(&info, "Chip " NAME53C "%s, device id 0x%x, "
"revision id 0x%x\n",
np->s.chip_name, np->device_id, np->revision_id);
- copy_info(&info, "At PCI address %s, "
-#ifdef __sparc__
- "IRQ %s\n",
-#else
- "IRQ %d\n",
-#endif
- pci_name(np->s.device),
-#ifdef __sparc__
- __irq_itoa(np->s.irq));
-#else
- (int) np->s.irq);
-#endif
+ copy_info(&info, "At PCI address %s, IRQ " IRQ_FMT "\n",
+ pci_name(np->s.device), IRQ_PRM(np->s.irq));
copy_info(&info, "Min. period factor %d, %s SCSI BUS%s\n",
(int) (np->minsync_dt ? np->minsync_dt : np->minsync),
np->maxwide ? "Wide" : "Narrow",
static int sym53c8xx_proc_info(struct Scsi_Host *host, char *buffer,
char **start, off_t offset, int length, int func)
{
- struct host_data *host_data;
- struct sym_hcb *np = NULL;
+ struct sym_hcb *np = sym_get_hcb(host);
int retv;
- host_data = (struct host_data *) host->hostdata;
- np = host_data->ncb;
- if (!np)
- return -EINVAL;
-
if (func) {
#ifdef SYM_LINUX_USER_COMMAND_SUPPORT
retv = sym_user_command(np, buffer, length);
/*
* Free controller resources.
*/
-static void sym_free_resources(struct sym_hcb *np)
+static void sym_free_resources(struct sym_hcb *np, struct pci_dev *pdev)
{
/*
* Free O/S specific resources.
*/
if (np->s.irq)
free_irq(np->s.irq, np);
-#ifndef SYM_CONF_IOMAPPED
- if (np->s.mmio_va)
- iounmap(np->s.mmio_va);
-#endif
- if (np->s.ram_va)
- iounmap(np->s.ram_va);
+ if (np->s.ioaddr)
+ pci_iounmap(pdev, np->s.ioaddr);
+ if (np->s.ramaddr)
+ pci_iounmap(pdev, np->s.ramaddr);
/*
* Free O/S independent resources.
*/
*/
static int sym_setup_bus_dma_mask(struct sym_hcb *np)
{
-#if SYM_CONF_DMA_ADDRESSING_MODE == 0
- if (pci_set_dma_mask(np->s.device, 0xffffffffUL))
- goto out_err32;
-#else
+#if SYM_CONF_DMA_ADDRESSING_MODE > 0
#if SYM_CONF_DMA_ADDRESSING_MODE == 1
-#define PciDmaMask 0xffffffffffULL
+#define DMA_DAC_MASK 0x000000ffffffffffULL /* 40-bit */
#elif SYM_CONF_DMA_ADDRESSING_MODE == 2
-#define PciDmaMask 0xffffffffffffffffULL
+#define DMA_DAC_MASK DMA_64BIT_MASK
#endif
- if (np->features & FE_DAC) {
- if (!pci_set_dma_mask(np->s.device, PciDmaMask)) {
- np->use_dac = 1;
- printf_info("%s: using 64 bit DMA addressing\n",
- sym_name(np));
- } else {
- if (pci_set_dma_mask(np->s.device, 0xffffffffUL))
- goto out_err32;
- }
+ if ((np->features & FE_DAC) &&
+ !pci_set_dma_mask(np->s.device, DMA_DAC_MASK)) {
+ np->use_dac = 1;
+ return 0;
}
-#undef PciDmaMask
#endif
- return 0;
-out_err32:
- printf_warning("%s: 32 BIT DMA ADDRESSING NOT SUPPORTED\n",
- sym_name(np));
+ if (!pci_set_dma_mask(np->s.device, DMA_32BIT_MASK))
+ return 0;
+
+ printf_warning("%s: No suitable DMA available\n", sym_name(np));
return -1;
}
struct host_data *host_data;
struct sym_hcb *np = NULL;
struct Scsi_Host *instance = NULL;
+ struct pci_dev *pdev = dev->pdev;
unsigned long flags;
struct sym_fw *fw;
printk(KERN_INFO
- "sym%d: <%s> rev 0x%x at pci %s "
-#ifdef __sparc__
- "irq %s\n",
-#else
- "irq %d\n",
-#endif
+ "sym%d: <%s> rev 0x%x at pci %s irq " IRQ_FMT "\n",
unit, dev->chip.name, dev->chip.revision_id,
- pci_name(dev->pdev),
-#ifdef __sparc__
- __irq_itoa(dev->s.irq));
-#else
- dev->s.irq);
-#endif
+ pci_name(pdev), IRQ_PRM(pdev->irq));
/*
* Get the firmware for this chip.
* We keep track in the HCB of all the resources that
* are to be released on error.
*/
- np = __sym_calloc_dma(dev->pdev, sizeof(*np), "HCB");
+ np = __sym_calloc_dma(&pdev->dev, sizeof(*np), "HCB");
if (!np)
goto attach_failed;
- np->s.device = dev->pdev;
- np->bus_dmat = dev->pdev; /* Result in 1 DMA pool per HBA */
+ np->s.device = pdev;
+ np->bus_dmat = &pdev->dev; /* Result in 1 DMA pool per HBA */
host_data->ncb = np;
np->s.host = instance;
- pci_set_drvdata(dev->pdev, np);
+ pci_set_drvdata(pdev, np);
/*
* Copy some useful infos to the HCB.
*/
np->hcb_ba = vtobus(np);
np->verbose = sym_driver_setup.verbose;
- np->s.device = dev->pdev;
+ np->s.device = pdev;
np->s.unit = unit;
np->device_id = dev->chip.device_id;
np->revision_id = dev->chip.revision_id;
strlcpy(np->s.chip_name, dev->chip.name, sizeof(np->s.chip_name));
sprintf(np->s.inst_name, "sym%d", np->s.unit);
- /*
- * Ask/tell the system about DMA addressing.
- */
if (sym_setup_bus_dma_mask(np))
goto attach_failed;
* Try to map the controller chip to
* virtual and physical memory.
*/
- np->mmio_ba = (u32)dev->s.base;
- np->s.io_ws = (np->features & FE_IO256)? 256 : 128;
-
-#ifndef SYM_CONF_IOMAPPED
- np->s.mmio_va = ioremap(dev->s.base_c, np->s.io_ws);
- if (!np->s.mmio_va) {
- printf_err("%s: can't map PCI MMIO region\n", sym_name(np));
- goto attach_failed;
- } else if (sym_verbose > 1)
- printf_info("%s: using memory mapped IO\n", sym_name(np));
-#endif /* !defined SYM_CONF_IOMAPPED */
-
- np->s.io_port = dev->s.io_port;
+ np->mmio_ba = (u32)dev->mmio_base;
+ np->s.ioaddr = dev->s.ioaddr;
+ np->s.ramaddr = dev->s.ramaddr;
+ np->s.io_ws = (np->features & FE_IO256) ? 256 : 128;
/*
* Map on-chip RAM if present and supported.
*/
if (!(np->features & FE_RAM))
- dev->s.base_2 = 0;
- if (dev->s.base_2) {
- np->ram_ba = (u32)dev->s.base_2;
- if (np->features & FE_RAM8K)
- np->ram_ws = 8192;
- else
- np->ram_ws = 4096;
- np->s.ram_va = ioremap(dev->s.base_2_c, np->ram_ws);
- if (!np->s.ram_va) {
- printf_err("%s: can't map PCI MEMORY region\n",
- sym_name(np));
- goto attach_failed;
- }
+ dev->ram_base = 0;
+ if (dev->ram_base) {
+ np->ram_ba = (u32)dev->ram_base;
+ np->ram_ws = (np->features & FE_RAM8K) ? 8192 : 4096;
}
- /*
- * Perform O/S independent stuff.
- */
- if (sym_hcb_attach(np, fw, dev->nvram))
+ if (sym_hcb_attach(instance, fw, dev->nvram))
goto attach_failed;
-
/*
* Install the interrupt handler.
* If we synchonize the C code with SCRIPTS on interrupt,
- * we donnot want to share the INTR line at all.
+ * we do not want to share the INTR line at all.
*/
- if (request_irq(dev->s.irq, sym53c8xx_intr, SA_SHIRQ,
- NAME53C8XX, np)) {
+ if (request_irq(pdev->irq, sym53c8xx_intr, SA_SHIRQ, NAME53C8XX, np)) {
printf_err("%s: request irq %d failure\n",
- sym_name(np), dev->s.irq);
+ sym_name(np), pdev->irq);
goto attach_failed;
}
- np->s.irq = dev->s.irq;
+ np->s.irq = pdev->irq;
/*
* After SCSI devices have been opened, we cannot
if (sym_reset_scsi_bus(np, 0))
goto reset_failed;
- /*
- * Initialize some queue headers.
- */
- sym_que_init(&np->s.wait_cmdq);
- sym_que_init(&np->s.busy_cmdq);
-
/*
* Start the SCRIPTS.
*/
instance->this_id = np->myaddr;
instance->max_id = np->maxwide ? 16 : 8;
instance->max_lun = SYM_CONF_MAX_LUN;
-#ifndef SYM_CONF_IOMAPPED
- instance->base = (unsigned long) np->s.mmio_va;
-#endif
- instance->irq = np->s.irq;
- instance->unique_id = np->s.io_port;
- instance->io_port = np->s.io_port;
- instance->n_io_port = np->s.io_ws;
- instance->dma_channel = 0;
+ instance->unique_id = pci_resource_start(pdev, 0);
instance->cmd_per_lun = SYM_CONF_MAX_TAG;
instance->can_queue = (SYM_CONF_MAX_START-2);
instance->sg_tablesize = SYM_CONF_MAX_SG;
return NULL;
printf_info("%s: giving up ...\n", sym_name(np));
if (np)
- sym_free_resources(np);
+ sym_free_resources(np, pdev);
scsi_host_put(instance);
return NULL;
devp->device_id = devp->chip.device_id;
nvp->type = 0;
- /*
- * Get access to chip IO registers
- */
-#ifndef SYM_CONF_IOMAPPED
- devp->s.mmio_va = ioremap(devp->s.base_c, 128);
- if (!devp->s.mmio_va)
- return;
-#endif
-
sym_read_nvram(devp, nvp);
-
- /*
- * Release access to chip IO registers
- */
-#ifndef SYM_CONF_IOMAPPED
- iounmap(devp->s.mmio_va);
-#endif
}
#else
static inline void sym_get_nvram(struct sym_device *devp, struct sym_nvram *nvp)
}
#endif /* SYM_CONF_NVRAM_SUPPORT */
-/*
- * Driver setup from the boot command line
- */
-#ifdef SYM_LINUX_BOOT_COMMAND_LINE_SUPPORT
-
-static struct sym_driver_setup
- sym_driver_safe_setup __initdata = SYM_LINUX_DRIVER_SAFE_SETUP;
-#ifdef MODULE
-char *sym53c8xx; /* command line passed by insmod */
-MODULE_PARM(sym53c8xx, "s");
-#endif
-
-#define OPT_MAX_TAG 1
-#define OPT_BURST_ORDER 2
-#define OPT_SCSI_LED 3
-#define OPT_SCSI_DIFF 4
-#define OPT_IRQ_MODE 5
-#define OPT_SCSI_BUS_CHECK 6
-#define OPT_HOST_ID 7
-#define OPT_REVERSE_PROBE 8
-#define OPT_VERBOSE 9
-#define OPT_DEBUG 10
-#define OPT_SETTLE_DELAY 11
-#define OPT_USE_NVRAM 12
-#define OPT_EXCLUDE 13
-#define OPT_SAFE_SETUP 14
-
-static char setup_token[] __initdata =
- "tags:" "burst:"
- "led:" "diff:"
- "irqm:" "buschk:"
- "hostid:" "revprob:"
- "verb:" "debug:"
- "settle:" "nvram:"
- "excl:" "safe:"
- ;
-
-#ifdef MODULE
-#define ARG_SEP ' '
-#else
-#define ARG_SEP ','
-#endif
-
-static int __init get_setup_token(char *p)
+static int __devinit sym_check_supported(struct sym_device *device)
{
- char *cur = setup_token;
- char *pc;
- int i = 0;
-
- while (cur != NULL && (pc = strchr(cur, ':')) != NULL) {
- ++pc;
- ++i;
- if (!strncmp(p, cur, pc - cur))
- return i;
- cur = pc;
- }
- return 0;
-}
-#endif /* SYM_LINUX_BOOT_COMMAND_LINE_SUPPORT */
-
-int __init sym53c8xx_setup(char *str)
-{
-#ifdef SYM_LINUX_BOOT_COMMAND_LINE_SUPPORT
- char *cur = str;
- char *pc, *pv;
- unsigned long val;
- unsigned int i, c;
- int xi = 0;
-
- while (cur != NULL && (pc = strchr(cur, ':')) != NULL) {
- char *pe;
-
- val = 0;
- pv = pc;
- c = *++pv;
-
- if (c == 'n')
- val = 0;
- else if (c == 'y')
- val = 1;
- else
- val = (int) simple_strtoul(pv, &pe, 0);
-
- switch (get_setup_token(cur)) {
- case OPT_MAX_TAG:
- sym_driver_setup.max_tag = val;
- if (!(pe && *pe == '/'))
- break;
- i = 0;
- while (*pe && *pe != ARG_SEP &&
- i < sizeof(sym_driver_setup.tag_ctrl)-1) {
- sym_driver_setup.tag_ctrl[i++] = *pe++;
- }
- sym_driver_setup.tag_ctrl[i] = '\0';
- break;
- case OPT_SAFE_SETUP:
- memcpy(&sym_driver_setup, &sym_driver_safe_setup,
- sizeof(sym_driver_setup));
- break;
- case OPT_EXCLUDE:
- if (xi < 8)
- sym_driver_setup.excludes[xi++] = val;
- break;
-
-#define __SIMPLE_OPTION(NAME, name) \
- case OPT_ ## NAME : \
- sym_driver_setup.name = val;\
- break;
-
- __SIMPLE_OPTION(BURST_ORDER, burst_order)
- __SIMPLE_OPTION(SCSI_LED, scsi_led)
- __SIMPLE_OPTION(SCSI_DIFF, scsi_diff)
- __SIMPLE_OPTION(IRQ_MODE, irq_mode)
- __SIMPLE_OPTION(SCSI_BUS_CHECK, scsi_bus_check)
- __SIMPLE_OPTION(HOST_ID, host_id)
- __SIMPLE_OPTION(REVERSE_PROBE, reverse_probe)
- __SIMPLE_OPTION(VERBOSE, verbose)
- __SIMPLE_OPTION(DEBUG, debug)
- __SIMPLE_OPTION(SETTLE_DELAY, settle_delay)
- __SIMPLE_OPTION(USE_NVRAM, use_nvram)
-
-#undef __SIMPLE_OPTION
-
- default:
- printk("sym53c8xx_setup: unexpected boot option '%.*s' ignored\n", (int)(pc-cur+1), cur);
- break;
- }
-
- if ((cur = strchr(cur, ARG_SEP)) != NULL)
- ++cur;
- }
-#endif /* SYM_LINUX_BOOT_COMMAND_LINE_SUPPORT */
- return 1;
-}
-
-#ifndef MODULE
-__setup("sym53c8xx=", sym53c8xx_setup);
-#endif
-
-/*
- * Read and check the PCI configuration for any detected NCR
- * boards and save data for attaching after all boards have
- * been detected.
- */
-static int __devinit
-sym53c8xx_pci_init(struct pci_dev *pdev, struct sym_device *device)
-{
- struct sym_pci_chip *chip;
- u_long base, base_2;
- u_long base_c, base_2_c, io_port;
- int i;
- u_short device_id, status_reg;
+ struct sym_chip *chip;
+ struct pci_dev *pdev = device->pdev;
u_char revision;
-
- /* Choose some short name for this device */
- sprintf(device->s.inst_name, "sym.%d.%d.%d", pdev->bus->number,
- PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
-
- device_id = pdev->device;
-
- io_port = pdev->resource[0].start;
-
- base_c = pdev->resource[1].start;
- i = pci_get_base_address(pdev, 1, &base);
-
- base_2_c = pdev->resource[i].start;
- pci_get_base_address(pdev, i, &base_2);
-
- base &= PCI_BASE_ADDRESS_MEM_MASK;
- base_2 &= PCI_BASE_ADDRESS_MEM_MASK;
-
- pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
+ unsigned long io_port = pci_resource_start(pdev, 0);
+ int i;
/*
* If user excluded this chip, do not initialize it.
+ * I hate this code so much. Must kill it.
*/
if (io_port) {
for (i = 0 ; i < 8 ; i++) {
if (sym_driver_setup.excludes[i] == io_port)
- return -1;
+ return -ENODEV;
}
}
/*
- * Check if the chip is supported.
+ * Check if the chip is supported. Then copy the chip description
+ * to our device structure so we can make it match the actual device
+ * and options.
*/
- chip = sym_lookup_pci_chip_table(device_id, revision);
+ pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
+ chip = sym_lookup_chip_table(pdev->device, revision);
if (!chip) {
- printf_info("%s: device not supported\n", sym_name(device));
- return -1;
+ dev_info(&pdev->dev, "device not supported\n");
+ return -ENODEV;
}
+ memcpy(&device->chip, chip, sizeof(device->chip));
+ device->chip.revision_id = revision;
- /*
- * Check if the chip has been assigned resources we need.
- * XXX: can this still happen with Linux 2.6's PCI layer?
- */
-#ifdef SYM_CONF_IOMAPPED
- if (!io_port) {
- printf_info("%s: IO base address disabled.\n",
- sym_name(device));
- return -1;
- }
-#else
- if (!base) {
- printf_info("%s: MMIO base address disabled.\n",
- sym_name(device));
- return -1;
- }
-#endif
+ return 0;
+}
- /*
- * Ignore Symbios chips controlled by various RAID controllers.
- * These controllers set value 0x52414944 at RAM end - 16.
- */
-#if defined(__i386__)
- if (base_2_c) {
- unsigned int ram_size, ram_val;
- void *ram_ptr;
+/*
+ * Ignore Symbios chips controlled by various RAID controllers.
+ * These controllers set value 0x52414944 at RAM end - 16.
+ */
+static int __devinit sym_check_raid(struct sym_device *device)
+{
+ unsigned int ram_size, ram_val;
- if (chip->features & FE_RAM8K)
- ram_size = 8192;
- else
- ram_size = 4096;
-
- ram_ptr = ioremap(base_2_c, ram_size);
- if (ram_ptr) {
- ram_val = readl_raw(ram_ptr + ram_size - 16);
- iounmap(ram_ptr);
- if (ram_val == 0x52414944) {
- printf_info("%s: not initializing, "
- "driven by RAID controller.\n",
- sym_name(device));
- return -1;
- }
- }
- }
-#endif /* i386 and PCI MEMORY accessible */
+ if (!device->s.ramaddr)
+ return 0;
- /*
- * Copy the chip description to our device structure,
- * so we can make it match the actual device and options.
- */
- memcpy(&device->chip, chip, sizeof(device->chip));
- device->chip.revision_id = revision;
+ if (device->chip.features & FE_RAM8K)
+ ram_size = 8192;
+ else
+ ram_size = 4096;
+
+ ram_val = readl(device->s.ramaddr + ram_size - 16);
+ if (ram_val != 0x52414944)
+ return 0;
+
+ dev_info(&device->pdev->dev,
+ "not initializing, driven by RAID controller.\n");
+ return -ENODEV;
+}
+
+static int __devinit sym_set_workarounds(struct sym_device *device)
+{
+ struct sym_chip *chip = &device->chip;
+ struct pci_dev *pdev = device->pdev;
+ u_short status_reg;
/*
- * Some features are required to be enabled in order to
- * work around some chip problems. :) ;)
* (ITEM 12 of a DEL about the 896 I haven't yet).
* We must ensure the chip will use WRITE AND INVALIDATE.
* The revision number limit is for now arbitrary.
*/
- if (device_id == PCI_DEVICE_ID_NCR_53C896 && revision < 0x4) {
+ if (pdev->device == PCI_DEVICE_ID_NCR_53C896 && chip->revision_id < 0x4) {
chip->features |= (FE_WRIE | FE_CLSE);
}
/* If the chip can do Memory Write Invalidate, enable it */
if (chip->features & FE_WRIE) {
if (pci_set_mwi(pdev))
- return -1;
+ return -ENODEV;
}
/*
}
}
- /*
- * Initialise device structure with items required by sym_attach.
- */
- device->pdev = pdev;
- device->s.base = base;
- device->s.base_2 = base_2;
- device->s.base_c = base_c;
- device->s.base_2_c = base_2_c;
- device->s.io_port = io_port;
- device->s.irq = pdev->irq;
-
return 0;
}
+/*
+ * Read and check the PCI configuration for any detected NCR
+ * boards and save data for attaching after all boards have
+ * been detected.
+ */
+static void __devinit
+sym_init_device(struct pci_dev *pdev, struct sym_device *device)
+{
+ int i;
+
+ device->host_id = SYM_SETUP_HOST_ID;
+ device->pdev = pdev;
+
+ i = pci_get_base_address(pdev, 1, &device->mmio_base);
+ pci_get_base_address(pdev, i, &device->ram_base);
+
+#ifndef CONFIG_SCSI_SYM53C8XX_IOMAPPED
+ if (device->mmio_base)
+ device->s.ioaddr = pci_iomap(pdev, 1,
+ pci_resource_len(pdev, 1));
+#endif
+ if (!device->s.ioaddr)
+ device->s.ioaddr = pci_iomap(pdev, 0,
+ pci_resource_len(pdev, 0));
+ if (device->ram_base)
+ device->s.ramaddr = pci_iomap(pdev, i,
+ pci_resource_len(pdev, i));
+}
+
/*
* The NCR PQS and PDS cards are constructed as a DEC bridge
* behind which sits a proprietary NCR memory controller and
* the preset SCSI ID (which may be zero) must be read in from
* a special configuration space register of the 875.
*/
-void sym_config_pqs(struct pci_dev *pdev, struct sym_device *sym_dev)
+static void sym_config_pqs(struct pci_dev *pdev, struct sym_device *sym_dev)
{
int slot;
+ u8 tmp;
for (slot = 0; slot < 256; slot++) {
- u8 tmp;
struct pci_dev *memc = pci_get_slot(pdev->bus, slot);
if (!memc || memc->vendor != 0x101a || memc->device == 0x0009) {
continue;
}
- /*
- * We set these bits in the memory controller once per 875.
- * This isn't a problem in practice.
- */
-
/* bit 1: allow individual 875 configuration */
pci_read_config_byte(memc, 0x44, &tmp);
- tmp |= 0x2;
- pci_write_config_byte(memc, 0x44, tmp);
+ if ((tmp & 0x2) == 0) {
+ tmp |= 0x2;
+ pci_write_config_byte(memc, 0x44, tmp);
+ }
/* bit 2: drive individual 875 interrupts to the bus */
pci_read_config_byte(memc, 0x45, &tmp);
- tmp |= 0x4;
- pci_write_config_byte(memc, 0x45, tmp);
-
- pci_read_config_byte(pdev, 0x84, &tmp);
- sym_dev->host_id = tmp;
+ if ((tmp & 0x4) == 0) {
+ tmp |= 0x4;
+ pci_write_config_byte(memc, 0x45, tmp);
+ }
pci_dev_put(memc);
-
break;
}
+
+ pci_read_config_byte(pdev, 0x84, &tmp);
+ sym_dev->host_id = tmp;
}
/*
* Detach the host.
* We have to free resources and halt the NCR chip.
*/
-static int sym_detach(struct sym_hcb *np)
+static int sym_detach(struct sym_hcb *np, struct pci_dev *pdev)
{
printk("%s: detaching ...\n", sym_name(np));
* so, since we may not be safe if interrupts occur.
*/
printk("%s: resetting chip\n", sym_name(np));
- OUTB (nc_istat, SRST);
- UDELAY (10);
- OUTB (nc_istat, 0);
+ OUTB(np, nc_istat, SRST);
+ udelay(10);
+ OUTB(np, nc_istat, 0);
- sym_free_resources(np);
+ sym_free_resources(np, pdev);
return 1;
}
-MODULE_LICENSE("Dual BSD/GPL");
-MODULE_VERSION(SYM_VERSION);
-
/*
* Driver host template.
*/
.name = "sym53c8xx",
.info = sym53c8xx_info,
.queuecommand = sym53c8xx_queue_command,
+ .slave_alloc = sym53c8xx_slave_alloc,
.slave_configure = sym53c8xx_slave_configure,
+ .slave_destroy = sym53c8xx_slave_destroy,
.eh_abort_handler = sym53c8xx_eh_abort_handler,
.eh_device_reset_handler = sym53c8xx_eh_device_reset_handler,
.eh_bus_reset_handler = sym53c8xx_eh_bus_reset_handler,
memset(&nvram, 0, sizeof(nvram));
if (pci_enable_device(pdev))
- return -ENODEV;
+ goto leave;
pci_set_master(pdev);
if (pci_request_regions(pdev, NAME53C8XX))
goto disable;
- sym_dev.host_id = SYM_SETUP_HOST_ID;
- if (sym53c8xx_pci_init(pdev, &sym_dev))
+ sym_init_device(pdev, &sym_dev);
+ if (sym_check_supported(&sym_dev))
+ goto free;
+
+ if (sym_check_raid(&sym_dev))
+ goto leave; /* Don't disable the device */
+
+ if (sym_set_workarounds(&sym_dev))
goto free;
sym_config_pqs(pdev, &sym_dev);
return 0;
detach:
- sym_detach(pci_get_drvdata(pdev));
+ sym_detach(pci_get_drvdata(pdev), pdev);
free:
pci_release_regions(pdev);
disable:
pci_disable_device(pdev);
+ leave:
return -ENODEV;
}
scsi_remove_host(host);
scsi_host_put(host);
- sym_detach(np);
+ sym_detach(np, pdev);
pci_release_regions(pdev);
pci_disable_device(pdev);
attach_count--;
}
-static void sym2_get_offset(struct scsi_device *sdev)
-{
- struct sym_hcb *np = ((struct host_data *)sdev->host->hostdata)->ncb;
- struct sym_tcb *tp = &np->target[sdev->id];
-
- spi_offset(sdev) = tp->tinfo.curr.offset;
-}
-
-static void sym2_set_offset(struct scsi_device *sdev, int offset)
+static void sym2_get_signalling(struct Scsi_Host *shost)
{
- struct sym_hcb *np = ((struct host_data *)sdev->host->hostdata)->ncb;
- struct sym_tcb *tp = &np->target[sdev->id];
+ struct sym_hcb *np = sym_get_hcb(shost);
+ enum spi_signal_type type;
- tp->tinfo.goal.offset = offset;
+ switch (np->scsi_mode) {
+ case SMODE_SE:
+ type = SPI_SIGNAL_SE;
+ break;
+ case SMODE_LVD:
+ type = SPI_SIGNAL_LVD;
+ break;
+ case SMODE_HVD:
+ type = SPI_SIGNAL_HVD;
+ break;
+ default:
+ type = SPI_SIGNAL_UNKNOWN;
+ break;
+ }
+ spi_signalling(shost) = type;
}
-
-static void sym2_get_period(struct scsi_device *sdev)
+static void sym2_set_offset(struct scsi_target *starget, int offset)
{
- struct sym_hcb *np = ((struct host_data *)sdev->host->hostdata)->ncb;
- struct sym_tcb *tp = &np->target[sdev->id];
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+ struct sym_hcb *np = sym_get_hcb(shost);
+ struct sym_tcb *tp = &np->target[starget->id];
- spi_period(sdev) = tp->tinfo.curr.period;
+ tp->tgoal.offset = offset;
+ tp->tgoal.check_nego = 1;
}
-static void sym2_set_period(struct scsi_device *sdev, int period)
+static void sym2_set_period(struct scsi_target *starget, int period)
{
- struct sym_hcb *np = ((struct host_data *)sdev->host->hostdata)->ncb;
- struct sym_tcb *tp = &np->target[sdev->id];
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+ struct sym_hcb *np = sym_get_hcb(shost);
+ struct sym_tcb *tp = &np->target[starget->id];
- /* have to have DT for these transfers */
- if (period <= np->minsync)
- tp->tinfo.goal.options |= PPR_OPT_DT;
+ /* have to have DT for these transfers, but DT will also
+ * set width, so check that this is allowed */
+ if (period <= np->minsync && spi_width(starget))
+ tp->tgoal.dt = 1;
- tp->tinfo.goal.period = period;
+ tp->tgoal.period = period;
+ tp->tgoal.check_nego = 1;
}
-static void sym2_get_width(struct scsi_device *sdev)
+static void sym2_set_width(struct scsi_target *starget, int width)
{
- struct sym_hcb *np = ((struct host_data *)sdev->host->hostdata)->ncb;
- struct sym_tcb *tp = &np->target[sdev->id];
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+ struct sym_hcb *np = sym_get_hcb(shost);
+ struct sym_tcb *tp = &np->target[starget->id];
+
+ /* It is illegal to have DT set on narrow transfers. If DT is
+ * clear, we must also clear IU and QAS. */
+ if (width == 0)
+ tp->tgoal.iu = tp->tgoal.dt = tp->tgoal.qas = 0;
- spi_width(sdev) = tp->tinfo.curr.width ? 1 : 0;
+ tp->tgoal.width = width;
+ tp->tgoal.check_nego = 1;
}
-static void sym2_set_width(struct scsi_device *sdev, int width)
+static void sym2_set_dt(struct scsi_target *starget, int dt)
{
- struct sym_hcb *np = ((struct host_data *)sdev->host->hostdata)->ncb;
- struct sym_tcb *tp = &np->target[sdev->id];
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+ struct sym_hcb *np = sym_get_hcb(shost);
+ struct sym_tcb *tp = &np->target[starget->id];
- /* It is illegal to have DT set on narrow transfers */
- if (width == 0)
- tp->tinfo.goal.options &= ~PPR_OPT_DT;
-
- tp->tinfo.goal.width = width;
+ /* We must clear QAS and IU if DT is clear */
+ if (dt)
+ tp->tgoal.dt = 1;
+ else
+ tp->tgoal.iu = tp->tgoal.dt = tp->tgoal.qas = 0;
+ tp->tgoal.check_nego = 1;
}
-static void sym2_get_dt(struct scsi_device *sdev)
+static void sym2_set_iu(struct scsi_target *starget, int iu)
{
- struct sym_hcb *np = ((struct host_data *)sdev->host->hostdata)->ncb;
- struct sym_tcb *tp = &np->target[sdev->id];
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+ struct sym_hcb *np = sym_get_hcb(shost);
+ struct sym_tcb *tp = &np->target[starget->id];
- spi_dt(sdev) = (tp->tinfo.curr.options & PPR_OPT_DT) ? 1 : 0;
+ if (iu)
+ tp->tgoal.iu = tp->tgoal.dt = 1;
+ else
+ tp->tgoal.iu = 0;
+ tp->tgoal.check_nego = 1;
}
-static void sym2_set_dt(struct scsi_device *sdev, int dt)
+static void sym2_set_qas(struct scsi_target *starget, int qas)
{
- struct sym_hcb *np = ((struct host_data *)sdev->host->hostdata)->ncb;
- struct sym_tcb *tp = &np->target[sdev->id];
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+ struct sym_hcb *np = sym_get_hcb(shost);
+ struct sym_tcb *tp = &np->target[starget->id];
- if (dt)
- tp->tinfo.goal.options |= PPR_OPT_DT;
+ if (qas)
+ tp->tgoal.dt = tp->tgoal.qas = 1;
else
- tp->tinfo.goal.options &= ~PPR_OPT_DT;
+ tp->tgoal.qas = 0;
+ tp->tgoal.check_nego = 1;
}
-
+
static struct spi_function_template sym2_transport_functions = {
.set_offset = sym2_set_offset,
- .get_offset = sym2_get_offset,
.show_offset = 1,
.set_period = sym2_set_period,
- .get_period = sym2_get_period,
.show_period = 1,
.set_width = sym2_set_width,
- .get_width = sym2_get_width,
.show_width = 1,
- .get_dt = sym2_get_dt,
.set_dt = sym2_set_dt,
.show_dt = 1,
+ .set_iu = sym2_set_iu,
+ .show_iu = 1,
+ .set_qas = sym2_set_qas,
+ .show_qas = 1,
+ .get_signalling = sym2_get_signalling,
};
static struct pci_device_id sym2_id_table[] __devinitdata = {
static int __init sym2_init(void)
{
+ int error;
+
+ sym2_setup_params();
sym2_transport_template = spi_attach_transport(&sym2_transport_functions);
if (!sym2_transport_template)
return -ENODEV;
- pci_register_driver(&sym2_driver);
- return 0;
+ error = pci_register_driver(&sym2_driver);
+ if (error)
+ spi_release_transport(sym2_transport_template);
+ return error;
}
static void __exit sym2_exit(void)
git://git.onelab.eu / linux-2.6.git / blobdiff