#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
+#include <scsi/scsi_transport_spi.h>
#include <scsi/scsi_host.h>
-#include "sym_conf.h"
+#include "sym53c8xx.h"
#include "sym_defs.h"
#include "sym_misc.h"
#define SYM_OPT_HANDLE_DIR_UNKNOWN
#define SYM_OPT_HANDLE_DEVICE_QUEUEING
#define SYM_OPT_LIMIT_COMMAND_REORDERING
-#define SYM_OPT_ANNOUNCE_TRANSFER_RATE
/*
* Print a message with severity.
#define printf_debug(args...) printk(KERN_DEBUG args)
#define printf(args...) printk(args)
-/*
- * Insert a delay in micro-seconds
- */
-#define sym_udelay(us) udelay(us)
-
/*
* A 'read barrier' flushes any data that have been prefetched
* by the processor due to out of order execution. Such a barrier
#define MEMORY_READ_BARRIER() rmb()
#define MEMORY_WRITE_BARRIER() wmb()
-/*
- * Let the compiler know about driver data structure names.
- */
-typedef struct sym_tcb *tcb_p;
-typedef struct sym_lcb *lcb_p;
-typedef struct sym_ccb *ccb_p;
-
/*
* IO functions definition for big/little endian CPU support.
* For now, PCI chips are only supported in little endian addressing mode,
#ifdef __BIG_ENDIAN
-#define inw_l2b inw
-#define inl_l2b inl
-#define outw_b2l outw
-#define outl_b2l outl
#define readw_l2b readw
#define readl_l2b readl
#define writew_b2l writew
#else /* little endian */
-#define inw_raw inw
-#define inl_raw inl
-#define outw_raw outw
-#define outl_raw outl
-
#define readw_raw readw
#define readl_raw readl
#define writew_raw writew
#error "Chips in BIG ENDIAN addressing mode are not (yet) supported"
#endif
-
-/*
- * If the chip uses big endian addressing mode over the
- * PCI, actual io register addresses for byte and word
- * accesses must be changed according to lane routing.
- * Btw, sym_offb() and sym_offw() macros only apply to
- * constants and so donnot generate bloated code.
- */
-
-#if defined(SYM_CONF_CHIP_BIG_ENDIAN)
-
-#define sym_offb(o) (((o)&~3)+((~((o)&3))&3))
-#define sym_offw(o) (((o)&~3)+((~((o)&3))&2))
-
-#else
-
-#define sym_offb(o) (o)
-#define sym_offw(o) (o)
-
-#endif
-
/*
* If the CPU and the chip use same endian-ness addressing,
* no byte reordering is needed for script patching.
* from the script.
*/
-#if defined(__BIG_ENDIAN) && !defined(SYM_CONF_CHIP_BIG_ENDIAN)
-
#define cpu_to_scr(dw) cpu_to_le32(dw)
#define scr_to_cpu(dw) le32_to_cpu(dw)
-#elif defined(__LITTLE_ENDIAN) && defined(SYM_CONF_CHIP_BIG_ENDIAN)
-
-#define cpu_to_scr(dw) cpu_to_be32(dw)
-#define scr_to_cpu(dw) be32_to_cpu(dw)
-
-#else
-
-#define cpu_to_scr(dw) (dw)
-#define scr_to_cpu(dw) (dw)
-
-#endif
-
-/*
- * Access to the controller chip.
- *
- * If SYM_CONF_IOMAPPED is defined, the driver will use
- * normal IOs instead of the MEMORY MAPPED IO method
- * recommended by PCI specifications.
- * If all PCI bridges, host brigdes and architectures
- * would have been correctly designed for PCI, this
- * option would be useless.
- *
- * If the CPU and the chip use same endian-ness addressing,
- * no byte reordering is needed for accessing chip io
- * registers. Functions suffixed by '_raw' are assumed
- * to access the chip over the PCI without doing byte
- * reordering. Functions suffixed by '_l2b' are
- * assumed to perform little-endian to big-endian byte
- * reordering, those suffixed by '_b2l' blah, blah,
- * blah, ...
- */
-
-#if defined(SYM_CONF_IOMAPPED)
-
-/*
- * IO mapped only input / ouput
- */
-
-#define INB_OFF(o) inb (np->s.io_port + sym_offb(o))
-#define OUTB_OFF(o, val) outb ((val), np->s.io_port + sym_offb(o))
-
-#if defined(__BIG_ENDIAN) && !defined(SYM_CONF_CHIP_BIG_ENDIAN)
-
-#define INW_OFF(o) inw_l2b (np->s.io_port + sym_offw(o))
-#define INL_OFF(o) inl_l2b (np->s.io_port + (o))
-
-#define OUTW_OFF(o, val) outw_b2l ((val), np->s.io_port + sym_offw(o))
-#define OUTL_OFF(o, val) outl_b2l ((val), np->s.io_port + (o))
-
-#elif defined(__LITTLE_ENDIAN) && defined(SYM_CONF_CHIP_BIG_ENDIAN)
-
-#define INW_OFF(o) inw_b2l (np->s.io_port + sym_offw(o))
-#define INL_OFF(o) inl_b2l (np->s.io_port + (o))
-
-#define OUTW_OFF(o, val) outw_l2b ((val), np->s.io_port + sym_offw(o))
-#define OUTL_OFF(o, val) outl_l2b ((val), np->s.io_port + (o))
-
-#else
-
-#define INW_OFF(o) inw_raw (np->s.io_port + sym_offw(o))
-#define INL_OFF(o) inl_raw (np->s.io_port + (o))
-
-#define OUTW_OFF(o, val) outw_raw ((val), np->s.io_port + sym_offw(o))
-#define OUTL_OFF(o, val) outl_raw ((val), np->s.io_port + (o))
-
-#endif /* ENDIANs */
-
-#else /* defined SYM_CONF_IOMAPPED */
-
-/*
- * MEMORY mapped IO input / output
- */
-
-#define INB_OFF(o) readb(np->s.mmio_va + sym_offb(o))
-#define OUTB_OFF(o, val) writeb((val), np->s.mmio_va + sym_offb(o))
-
-#if defined(__BIG_ENDIAN) && !defined(SYM_CONF_CHIP_BIG_ENDIAN)
-
-#define INW_OFF(o) readw_l2b(np->s.mmio_va + sym_offw(o))
-#define INL_OFF(o) readl_l2b(np->s.mmio_va + (o))
-
-#define OUTW_OFF(o, val) writew_b2l((val), np->s.mmio_va + sym_offw(o))
-#define OUTL_OFF(o, val) writel_b2l((val), np->s.mmio_va + (o))
-
-#elif defined(__LITTLE_ENDIAN) && defined(SYM_CONF_CHIP_BIG_ENDIAN)
-
-#define INW_OFF(o) readw_b2l(np->s.mmio_va + sym_offw(o))
-#define INL_OFF(o) readl_b2l(np->s.mmio_va + (o))
-
-#define OUTW_OFF(o, val) writew_l2b((val), np->s.mmio_va + sym_offw(o))
-#define OUTL_OFF(o, val) writel_l2b((val), np->s.mmio_va + (o))
-
-#else
-
-#define INW_OFF(o) readw_raw(np->s.mmio_va + sym_offw(o))
-#define INL_OFF(o) readl_raw(np->s.mmio_va + (o))
-
-#define OUTW_OFF(o, val) writew_raw((val), np->s.mmio_va + sym_offw(o))
-#define OUTL_OFF(o, val) writel_raw((val), np->s.mmio_va + (o))
-
-#endif
-
-#endif /* defined SYM_CONF_IOMAPPED */
-
-#define OUTRAM_OFF(o, a, l) memcpy_toio(np->s.ram_va + (o), (a), (l))
-
/*
* Remap some status field values.
*/
struct Scsi_Host *host;
- void __iomem * mmio_va; /* MMIO kernel virtual address */
- void __iomem * ram_va; /* RAM kernel virtual address */
- u_long io_port; /* IO port address cookie */
+ void __iomem * ioaddr; /* MMIO kernel io address */
+ void __iomem * ramaddr; /* RAM kernel io address */
u_short io_ws; /* IO window size */
int irq; /* IRQ number */
*/
#define sym_name(np) (np)->s.inst_name
-/*
- * Data structure used as input for the NVRAM reading.
- * Must resolve the IO macros and sym_name(), when
- * used as sub-field 's' of another structure.
- */
-struct sym_slot {
- u_long base;
- u_long base_2;
- u_long base_c;
- u_long base_2_c;
- int irq;
-/* port and address fields to fit INB, OUTB macros */
- u_long io_port;
- void __iomem * mmio_va;
- char inst_name[16];
-};
-
struct sym_nvram;
+/*
+ * The IO macros require a struct called 's' and are abused in sym_nvram.c
+ */
struct sym_device {
struct pci_dev *pdev;
- struct sym_slot s;
- struct sym_pci_chip chip;
+ unsigned long mmio_base;
+ unsigned long ram_base;
+ struct {
+ void __iomem *ioaddr;
+ void __iomem *ramaddr;
+ } s;
+ struct sym_chip chip;
struct sym_nvram *nvram;
u_short device_id;
u_char host_id;
struct sym_hcb *ncb;
};
-/*
- * The driver definitions (sym_hipd.h) must know about a
- * couple of things related to the memory allocator.
- */
-typedef u_long m_addr_t; /* Enough bits to represent any address */
-#define SYM_MEM_PAGE_ORDER 0 /* 1 PAGE maximum */
-#define SYM_MEM_CLUSTER_SHIFT (PAGE_SHIFT+SYM_MEM_PAGE_ORDER)
-#ifdef MODULE
-#define SYM_MEM_FREE_UNUSED /* Free unused pages immediately */
-#endif
-typedef struct pci_dev *m_pool_ident_t;
-
-/*
- * Include driver soft definitions.
- */
-#include "sym_fw.h"
-#include "sym_hipd.h"
-
-/*
- * Memory allocator related stuff.
- */
-
-#define SYM_MEM_GFP_FLAGS GFP_ATOMIC
-#define SYM_MEM_WARN 1 /* Warn on failed operations */
-
-#define sym_get_mem_cluster() \
- __get_free_pages(SYM_MEM_GFP_FLAGS, SYM_MEM_PAGE_ORDER)
-#define sym_free_mem_cluster(p) \
- free_pages(p, SYM_MEM_PAGE_ORDER)
-
-void *sym_calloc(int size, char *name);
-void sym_mfree(void *m, int size, char *name);
-
-/*
- * We have to provide the driver memory allocator with methods for
- * it to maintain virtual to bus physical address translations.
- */
-
-#define sym_m_pool_match(mp_id1, mp_id2) (mp_id1 == mp_id2)
-
-static __inline m_addr_t sym_m_get_dma_mem_cluster(m_pool_p mp, m_vtob_p vbp)
-{
- void *vaddr = NULL;
- dma_addr_t baddr = 0;
-
- vaddr = pci_alloc_consistent(mp->dev_dmat,SYM_MEM_CLUSTER_SIZE, &baddr);
- if (vaddr) {
- vbp->vaddr = (m_addr_t) vaddr;
- vbp->baddr = (m_addr_t) baddr;
- }
- return (m_addr_t) vaddr;
-}
-
-static __inline void sym_m_free_dma_mem_cluster(m_pool_p mp, m_vtob_p vbp)
+static inline struct sym_hcb * sym_get_hcb(struct Scsi_Host *host)
{
- pci_free_consistent(mp->dev_dmat, SYM_MEM_CLUSTER_SIZE,
- (void *)vbp->vaddr, (dma_addr_t)vbp->baddr);
+ return ((struct host_data *)host->hostdata)->ncb;
}
-#define sym_m_create_dma_mem_tag(mp) (0)
-#define sym_m_delete_dma_mem_tag(mp) do { ; } while (0)
-
-void *__sym_calloc_dma(m_pool_ident_t dev_dmat, int size, char *name);
-void __sym_mfree_dma(m_pool_ident_t dev_dmat, void *m, int size, char *name);
-m_addr_t __vtobus(m_pool_ident_t dev_dmat, void *m);
+#include "sym_fw.h"
+#include "sym_hipd.h"
/*
* Set the status field of a CAM CCB.
*/
static __inline void
-sym_set_cam_status(struct scsi_cmnd *ccb, int status)
+sym_set_cam_status(struct scsi_cmnd *cmd, int status)
{
- ccb->result &= ~(0xff << 16);
- ccb->result |= (status << 16);
+ cmd->result &= ~(0xff << 16);
+ cmd->result |= (status << 16);
}
/*
* Get the status field of a CAM CCB.
*/
static __inline int
-sym_get_cam_status(struct scsi_cmnd *ccb)
+sym_get_cam_status(struct scsi_cmnd *cmd)
{
- return ((ccb->result >> 16) & 0xff);
+ return host_byte(cmd->result);
}
-/*
- * The dma mapping is mostly handled by the
- * SCSI layer and the driver glue under Linux.
- */
-#define sym_data_dmamap_create(np, cp) (0)
-#define sym_data_dmamap_destroy(np, cp) do { ; } while (0)
-#define sym_data_dmamap_unload(np, cp) do { ; } while (0)
-#define sym_data_dmamap_presync(np, cp) do { ; } while (0)
-#define sym_data_dmamap_postsync(np, cp) do { ; } while (0)
-
-/*
- * Async handler for negotiations.
- */
-void sym_xpt_async_nego_wide(struct sym_hcb *np, int target);
-#define sym_xpt_async_nego_sync(np, target) \
- sym_announce_transfer_rate(np, target)
-#define sym_xpt_async_nego_ppr(np, target) \
- sym_announce_transfer_rate(np, target)
-
/*
* Build CAM result for a successful IO and for a failed IO.
*/
-static __inline void sym_set_cam_result_ok(struct sym_hcb *np, ccb_p cp, int resid)
+static __inline void sym_set_cam_result_ok(struct sym_ccb *cp, struct scsi_cmnd *cmd, int resid)
{
- struct scsi_cmnd *cmd = cp->cam_ccb;
-
cmd->resid = resid;
cmd->result = (((DID_OK) << 16) + ((cp->ssss_status) & 0x7f));
}
-void sym_set_cam_result_error(struct sym_hcb *np, ccb_p cp, int resid);
+void sym_set_cam_result_error(struct sym_hcb *np, struct sym_ccb *cp, int resid);
-/*
- * Other O/S specific methods.
- */
-#define sym_cam_target_id(ccb) (ccb)->target
-#define sym_cam_target_lun(ccb) (ccb)->lun
-#define sym_freeze_cam_ccb(ccb) do { ; } while (0)
void sym_xpt_done(struct sym_hcb *np, struct scsi_cmnd *ccb);
-void sym_print_addr (ccb_p cp);
+#define sym_print_addr(cmd, arg...) dev_info(&cmd->device->sdev_gendev , ## arg)
void sym_xpt_async_bus_reset(struct sym_hcb *np);
void sym_xpt_async_sent_bdr(struct sym_hcb *np, int target);
-int sym_setup_data_and_start (struct sym_hcb *np, struct scsi_cmnd *csio, ccb_p cp);
+int sym_setup_data_and_start (struct sym_hcb *np, struct scsi_cmnd *csio, struct sym_ccb *cp);
void sym_log_bus_error(struct sym_hcb *np);
void sym_sniff_inquiry(struct sym_hcb *np, struct scsi_cmnd *cmd, int resid);
git://git.onelab.eu / linux-2.6.git / blobdiff