* clustering is enabled. ENABLE_CLUSTERING provides a performance increase
* up to 50% on sequential access.
*
- * Since the Scsi_Host_Template structure is shared among all 14F and 34F,
+ * Since the struct scsi_host_template structure is shared among all 14F and 34F,
* the last setting of use_clustering is in effect for all of these boards.
*
* Here a sample configuration using two U14F boards:
.release = u14_34f_release,
.queuecommand = u14_34f_queuecommand,
.eh_abort_handler = u14_34f_eh_abort,
- .eh_device_reset_handler = NULL,
- .eh_bus_reset_handler = NULL,
.eh_host_reset_handler = u14_34f_eh_host_reset,
.bios_param = u14_34f_bios_param,
.slave_configure = u14_34f_slave_configure,
else
link_suffix = "";
- printk("%s: scsi%d, channel %d, id %d, lun %d, cmds/lun %d%s%s.\n",
- BN(j), host->host_no, dev->channel, dev->id, dev->lun,
+ sdev_printk(KERN_INFO, dev, "cmds/lun %d%s%s.\n",
dev->queue_depth, link_suffix, tag_suffix);
return FALSE;
if (wait_on_busy(sh[j]->io_port, MAXLOOP)) {
unmap_dma(i, j);
SCpnt->host_scribble = NULL;
- printk("%s: qcomm, target %d.%d:%d, pid %ld, adapter busy.\n",
- BN(j), SCpnt->device->channel, SCpnt->device->id, SCpnt->device->lun, SCpnt->pid);
+ scmd_printk(KERN_INFO, SCpnt,
+ "qcomm, pid %ld, adapter busy.\n", SCpnt->pid);
return 1;
}
j = ((struct hostdata *) SCarg->device->host->hostdata)->board_number;
if (SCarg->host_scribble == NULL) {
- printk("%s: abort, target %d.%d:%d, pid %ld inactive.\n",
- BN(j), SCarg->device->channel, SCarg->device->id, SCarg->device->lun, SCarg->pid);
+ scmd_printk(KERN_INFO, SCarg, "abort, pid %ld inactive.\n",
+ SCarg->pid);
return SUCCESS;
}
i = *(unsigned int *)SCarg->host_scribble;
- printk("%s: abort, mbox %d, target %d.%d:%d, pid %ld.\n",
- BN(j), i, SCarg->device->channel, SCarg->device->id, SCarg->device->lun, SCarg->pid);
+ scmd_printk(KERN_INFO, SCarg, "abort, mbox %d, pid %ld.\n",
+ i, SCarg->pid);
if (i >= sh[j]->can_queue)
panic("%s: abort, invalid SCarg->host_scribble.\n", BN(j));
if (inb(sh[j]->io_port + REG_SYS_INTR) & IRQ_ASSERTED)
printk("%s: abort, mbox %d, interrupt pending.\n", BN(j), i);
- if (SCarg->eh_state == SCSI_STATE_TIMEOUT) {
- unmap_dma(i, j);
- SCarg->host_scribble = NULL;
- HD(j)->cp_stat[i] = FREE;
- printk("%s, abort, mbox %d, eh_state timeout, pid %ld.\n",
- BN(j), i, SCarg->pid);
- return SUCCESS;
- }
-
return FAILED;
}
struct scsi_cmnd *SCpnt;
j = ((struct hostdata *) SCarg->device->host->hostdata)->board_number;
- printk("%s: reset, enter, target %d.%d:%d, pid %ld.\n",
- BN(j), SCarg->device->channel, SCarg->device->id, SCarg->device->lun, SCarg->pid);
+ scmd_printk(KERN_INFO, SCarg, "reset, enter, pid %ld.\n", SCarg->pid);
+
+ spin_lock_irq(sh[j]->host_lock);
if (SCarg->host_scribble == NULL)
printk("%s: reset, pid %ld inactive.\n", BN(j), SCarg->pid);
if (HD(j)->in_reset) {
printk("%s: reset, exit, already in reset.\n", BN(j));
+ spin_unlock_irq(sh[j]->host_lock);
return FAILED;
}
if (wait_on_busy(sh[j]->io_port, MAXLOOP)) {
printk("%s: reset, exit, timeout error.\n", BN(j));
+ spin_unlock_irq(sh[j]->host_lock);
return FAILED;
}
if (wait_on_busy(sh[j]->io_port, MAXLOOP)) {
printk("%s: reset, cannot reset, timeout error.\n", BN(j));
+ spin_unlock_irq(sh[j]->host_lock);
return FAILED;
}
if (arg_done) printk("%s: reset, exit, pid %ld done.\n", BN(j), SCarg->pid);
else printk("%s: reset, exit.\n", BN(j));
+ spin_unlock_irq(sh[j]->host_lock);
return SUCCESS;
}
k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
if (wait_on_busy(sh[j]->io_port, MAXLOOP)) {
- printk("%s: %s, target %d.%d:%d, pid %ld, mbox %d, adapter"\
- " busy, will abort.\n", BN(j), (ihdlr ? "ihdlr" : "qcomm"),
- SCpnt->device->channel, SCpnt->device->id, SCpnt->device->lun, SCpnt->pid, k);
+ scmd_printk(KERN_INFO, SCpnt,
+ "%s, pid %ld, mbox %d, adapter"
+ " busy, will abort.\n", (ihdlr ? "ihdlr" : "qcomm"),
+ SCpnt->pid, k);
HD(j)->cp_stat[k] = ABORTING;
continue;
}
/* If there was a bus reset, redo operation on each target */
else if (tstatus != GOOD && SCpnt->device->type == TYPE_DISK
- && HD(j)->target_redo[SCpnt->device->id][SCpnt->device->channel])
+ && HD(j)->target_redo[scmd_id(SCpnt)][scmd_channel(SCpnt)])
status = DID_BUS_BUSY << 16;
/* Works around a flaw in scsi.c */
status = DID_OK << 16;
if (tstatus == GOOD)
- HD(j)->target_redo[SCpnt->device->id][SCpnt->device->channel] = FALSE;
+ HD(j)->target_redo[scmd_id(SCpnt)][scmd_channel(SCpnt)] = FALSE;
if (spp->target_status && SCpnt->device->type == TYPE_DISK &&
(!(tstatus == CHECK_CONDITION && HD(j)->iocount <= 1000 &&
(SCpnt->sense_buffer[2] & 0xf) == NOT_READY)))
- printk("%s: ihdlr, target %d.%d:%d, pid %ld, "\
- "target_status 0x%x, sense key 0x%x.\n", BN(j),
- SCpnt->device->channel, SCpnt->device->id, SCpnt->device->lun,
+ scmd_printk(KERN_INFO, SCpnt,
+ "ihdlr, pid %ld, target_status 0x%x, sense key 0x%x.\n",
SCpnt->pid, spp->target_status,
SCpnt->sense_buffer[2]);
- HD(j)->target_to[SCpnt->device->id][SCpnt->device->channel] = 0;
+ HD(j)->target_to[scmd_id(SCpnt)][scmd_channel(SCpnt)] = 0;
if (HD(j)->last_retried_pid == SCpnt->pid) HD(j)->retries = 0;
break;
case ASST: /* Selection Time Out */
- if (HD(j)->target_to[SCpnt->device->id][SCpnt->device->channel] > 1)
+ if (HD(j)->target_to[scmd_id(SCpnt)][scmd_channel(SCpnt)] > 1)
status = DID_ERROR << 16;
else {
status = DID_TIME_OUT << 16;
- HD(j)->target_to[SCpnt->device->id][SCpnt->device->channel]++;
+ HD(j)->target_to[scmd_id(SCpnt)][scmd_channel(SCpnt)]++;
}
break;
spp->adapter_status != ASST && HD(j)->iocount <= 1000) ||
do_trace || msg_byte(spp->target_status))
#endif
- printk("%s: ihdlr, mbox %2d, err 0x%x:%x,"\
- " target %d.%d:%d, pid %ld, reg 0x%x, count %d.\n",
- BN(j), i, spp->adapter_status, spp->target_status,
- SCpnt->device->channel, SCpnt->device->id, SCpnt->device->lun, SCpnt->pid,
+ scmd_printk(KERN_INFO, SCpnt, "ihdlr, mbox %2d, err 0x%x:%x,"\
+ " pid %ld, reg 0x%x, count %d.\n",
+ i, spp->adapter_status, spp->target_status, SCpnt->pid,
reg, HD(j)->iocount);
unmap_dma(i, j);
for (j = 0; sh[j] != NULL && sh[j] != shpnt; j++);
- if (sh[j] == NULL) panic("%s: release, invalid Scsi_Host pointer.\n",
- driver_name);
+ if (sh[j] == NULL)
+ panic("%s: release, invalid Scsi_Host pointer.\n", driver_name);
for (i = 0; i < sh[j]->can_queue; i++)
- if ((&HD(j)->cp[i])->sglist) kfree((&HD(j)->cp[i])->sglist);
+ kfree((&HD(j)->cp[i])->sglist);
for (i = 0; i < sh[j]->can_queue; i++)
pci_unmap_single(HD(j)->pdev, HD(j)->cp[i].cp_dma_addr,
free_irq(sh[j]->irq, &sha[j]);
- if (sh[j]->dma_channel != NO_DMA) free_dma(sh[j]->dma_channel);
+ if (sh[j]->dma_channel != NO_DMA)
+ free_dma(sh[j]->dma_channel);
release_region(sh[j]->io_port, sh[j]->n_io_port);
scsi_unregister(sh[j]);
git://git.onelab.eu / linux-2.6.git / blobdiff