vserver 2.0 rc7

[linux-2.6.git] / drivers / serial / 8250_hp300.c

diff --git a/drivers/serial/8250_hp300.c b/drivers/serial/8250_hp300.c
index b8d51eb..4315afe 100644 (file)
--- a/drivers/serial/8250_hp300.c
+++ b/drivers/serial/8250_hp300.c
@@ -9,15 +9,15 @@
 #include <linux/init.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
-#include <linux/tty.h>
 #include <linux/serial.h>
-#include <linux/serialP.h>
 #include <linux/serial_core.h>
 #include <linux/delay.h>
 #include <linux/dio.h>
 #include <linux/console.h>
 #include <asm/io.h>
 
+#include "8250.h"
+
 #if !defined(CONFIG_HPDCA) && !defined(CONFIG_HPAPCI)
 #warning CONFIG_8250 defined but neither CONFIG_HPDCA nor CONFIG_HPAPCI defined, are you sure?
 #endif
@@ -163,7 +163,7 @@ int __init hp300_setup_serial_console(void)
 static int __devinit hpdca_init_one(struct dio_dev *d,
                                 const struct dio_device_id *ent)
 {
-       struct serial_struct serial_req;
+       struct uart_port port;
        int line;
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE
@@ -172,21 +172,22 @@ static int __devinit hpdca_init_one(struct dio_dev *d,
                return 0;
        }
 #endif
-       memset(&serial_req, 0, sizeof(struct serial_struct));
+       memset(&port, 0, sizeof(struct uart_port));
 
        /* Memory mapped I/O */
-       serial_req.io_type = SERIAL_IO_MEM;
-       serial_req.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF;
-       serial_req.irq = d->ipl;
-       serial_req.baud_base = HPDCA_BAUD_BASE;
-       serial_req.iomap_base = (d->resource.start + UART_OFFSET);
-       serial_req.iomem_base = (char *)(serial_req.iomap_base + DIO_VIRADDRBASE);
-       serial_req.iomem_reg_shift = 1;
-       line = register_serial(&serial_req);
+       port.iotype = UPIO_MEM;
+       port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF;
+       port.irq = d->ipl;
+       port.uartclk = HPDCA_BAUD_BASE * 16;
+       port.mapbase = (d->resource.start + UART_OFFSET);
+       port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE);
+       port.regshift = 1;
+       port.dev = &d->dev;
+       line = serial8250_register_port(&port);
 
        if (line < 0) {
                printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d"
-                      " irq %d failed\n", d->scode, serial_req.irq);
+                      " irq %d failed\n", d->scode, port.irq);
                return -ENOMEM;
        }
 
@@ -209,7 +210,7 @@ static int __init hp300_8250_init(void)
 #ifdef CONFIG_HPAPCI
        int line;
        unsigned long base;
-       struct serial_struct serial_req;
+       struct uart_port uport;
        struct hp300_port *port;
        int i;
 #endif
@@ -251,25 +252,25 @@ static int __init hp300_8250_init(void)
                if (!port)
                        return -ENOMEM;
 
-               memset(&serial_req, 0, sizeof(struct serial_struct));
+               memset(&uport, 0, sizeof(struct uart_port));
 
                base = (FRODO_BASE + FRODO_APCI_OFFSET(i));
 
                /* Memory mapped I/O */
-               serial_req.io_type = SERIAL_IO_MEM;
-               serial_req.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF;
+               uport.iotype = UPIO_MEM;
+               uport.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF;
                /* XXX - no interrupt support yet */
-               serial_req.irq = 0;
-               serial_req.baud_base = HPAPCI_BAUD_BASE;
-               serial_req.iomap_base = base;
-               serial_req.iomem_base = (char *)(serial_req.iomap_base + DIO_VIRADDRBASE);
-               serial_req.iomem_reg_shift = 2;
+               uport.irq = 0;
+               uport.uartclk = HPAPCI_BAUD_BASE * 16;
+               uport.mapbase = base;
+               uport.membase = (char *)(base + DIO_VIRADDRBASE);
+               uport.regshift = 2;
 
-               line = register_serial(&serial_req);
+               line = serial8250_register_port(&uport);
 
                if (line < 0) {
                        printk(KERN_NOTICE "8250_hp300: register_serial() APCI %d"
-                              " irq %d failed\n", i, serial_req.irq);
+                              " irq %d failed\n", i, uport.irq);
                        kfree(port);
                        continue;
                }
@@ -299,7 +300,7 @@ static void __devexit hpdca_remove_one(struct dio_dev *d)
                /* Disable board-interrupts */
                out_8(d->resource.start + DIO_VIRADDRBASE + DCA_IC, 0);
        }
-       unregister_serial(line);
+       serial8250_unregister_port(line);
 }
 #endif
 
@@ -309,7 +310,7 @@ static void __exit hp300_8250_exit(void)
        struct hp300_port *port, *to_free;
 
        for (port = hp300_ports; port; ) {
-               unregister_serial(port->line);
+               serial8250_unregister_port(port->line);
                to_free = port;
                port = port->next;
                kfree(to_free);