config SERIAL_8250
tristate "8250/16550 and compatible serial support"
depends on (BROKEN || !SPARC)
- depends on !XEN_DISABLE_SERIAL
select SERIAL_CORE
---help---
This selects whether you want to include the driver for the standard
If unsure, say N.
-config SERIAL_8250_GSC
- tristate
- depends on SERIAL_8250 && GSC
- default SERIAL_8250
-
-config SERIAL_8250_PCI
- tristate "8250/16550 PCI device support" if EMBEDDED
- depends on SERIAL_8250 && PCI
- default SERIAL_8250
- help
- This builds standard PCI serial support. You may be able to
- disable this feature if you only need legacy serial support.
- Saves about 9K.
-
-config SERIAL_8250_PNP
- tristate "8250/16550 PNP device support" if EMBEDDED
- depends on SERIAL_8250 && PNP
- default SERIAL_8250
- help
- This builds standard PNP serial support. You may be able to
- disable this feature if you only need legacy serial support.
-
-config SERIAL_8250_HP300
- tristate
- depends on SERIAL_8250 && HP300
- default SERIAL_8250
-
config SERIAL_8250_CS
tristate "8250/16550 PCMCIA device support"
depends on PCMCIA && SERIAL_8250
If unsure, say N.
+config SERIAL_8250_ACPI
+ bool "8250/16550 device discovery via ACPI namespace"
+ default y if IA64
+ depends on ACPI && SERIAL_8250
+ ---help---
+ If you wish to enable serial port discovery via the ACPI
+ namespace, say Y here. If unsure, say N.
+
config SERIAL_8250_NR_UARTS
int "Maximum number of 8250/16550 serial ports"
depends on SERIAL_8250
kernel at boot time.)
config SERIAL_AT91
- bool "AT91RM9200 / AT91SAM9261 serial port support"
- depends on ARM && (ARCH_AT91RM9200 || ARCH_AT91SAM9261)
+ bool "AT91RM9200 serial port support"
+ depends on ARM && ARCH_AT91RM9200
select SERIAL_CORE
help
- This enables the driver for the on-chip UARTs of the Atmel
- AT91RM9200 and AT91SAM926 processor.
+ This enables the driver for the on-chip UARTs of the AT91RM9200
+ processor.
config SERIAL_AT91_CONSOLE
- bool "Support for console on AT91RM9200 / AT91SAM9261 serial port"
+ bool "Support for console on AT91RM9200 serial port"
depends on SERIAL_AT91=y
select SERIAL_CORE_CONSOLE
help
- Say Y here if you wish to use a UART on the Atmel AT91RM9200 or
- AT91SAM9261 as the system console (the system console is the device
- which receives all kernel messages and warnings and which allows
- logins in single user mode).
+ Say Y here if you wish to use a UART on the AT91RM9200 as the system
+ console (the system console is the device which receives all kernel
+ messages and warnings and which allows logins in single user mode).
config SERIAL_AT91_TTYAT
bool "Install as device ttyAT0-4 instead of ttyS0-4"
kernel at boot time.)
config SERIAL_S3C2410
- tristate "Samsung S3C2410/S3C2440/S3C2442/S3C2412 Serial port support"
+ tristate "Samsung S3C2410 Serial port support"
depends on ARM && ARCH_S3C2410
select SERIAL_CORE
help
- Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
+ Support for the on-chip UARTs on the Samsung S3C2410X CPU,
providing /dev/ttySAC0, 1 and 2 (note, some machines may not
provide all of these ports, depending on how the serial port
pins are configured.
- Currently this driver supports the UARTS on the S3C2410, S3C2440,
- S3C2442, S3C2412 and S3C2413 CPUs.
-
config SERIAL_S3C2410_CONSOLE
bool "Support for console on S3C2410 serial port"
depends on SERIAL_S3C2410=y
select SERIAL_CORE_CONSOLE
help
- Allow selection of the S3C24XX on-board serial ports for use as
+ Allow selection of the S3C2410 on-board serial ports for use as
an virtual console.
Even if you say Y here, the currently visible virtual console
on your Sparc system as the console, you can do so by answering
Y to this option.
-config SERIAL_SUNHV
- bool "Sun4v Hypervisor Console support"
- depends on SPARC64
- help
- This driver supports the console device found on SUN4V Sparc
- systems. Say Y if you want to be able to use this device.
-
config SERIAL_IP22_ZILOG
tristate "IP22 Zilog8530 serial support"
depends on SGI_IP22
depends on SERIAL_SH_SCI=y
select SERIAL_CORE_CONSOLE
+config SERIAL_AU1X00
+ bool "Enable Au1x00 UART Support"
+ depends on MIPS && SOC_AU1X00
+ select SERIAL_CORE
+ help
+ If you have an Alchemy AU1X00 processor (MIPS based) and you want
+ to use serial ports, say Y. Otherwise, say N.
+
+config SERIAL_AU1X00_CONSOLE
+ bool "Enable Au1x00 serial console"
+ depends on SERIAL_AU1X00
+ select SERIAL_CORE_CONSOLE
+ help
+ If you have an Alchemy AU1X00 processor (MIPS based) and you want
+ to use a console on a serial port, say Y. Otherwise, say N.
+
config SERIAL_CORE
tristate
config SERIAL_TXX9
bool "TMPTX39XX/49XX SIO support"
- depends HAS_TXX9_SERIAL
+ depends HAS_TXX9_SERIAL && BROKEN
select SERIAL_CORE
default y
If you have an SGI Altix with an IOC3 serial card,
say Y or M. Otherwise, say N.
-config SERIAL_NETX
- bool "NetX serial port support"
- depends on ARM && ARCH_NETX
- select SERIAL_CORE
- help
- If you have a machine based on a Hilscher NetX SoC you
- can enable its onboard serial port by enabling this option.
-
- To compile this driver as a module, choose M here: the
- module will be called netx-serial.
-
-config SERIAL_NETX_CONSOLE
- bool "Console on NetX serial port"
- depends on SERIAL_NETX
- select SERIAL_CORE_CONSOLE
- help
- If you have enabled the serial port on the Motorola IMX
- CPU you can make it the console by answering Y to this option.
-
endmenu
git://git.onelab.eu / linux-2.6.git / blobdiff